All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

Size: px
Start display at page:

Download "All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice."

Transcription

1

2 TRADEMARKS IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. By downloding, copying, instlling or using the softwre you gree to this license. If you do not gree to this license, do not downlod, instll, copy or use the softwre. Intel License Agreement For Open Source Computer Vision Lirry Copyright 2000, Intel Corportion, ll rights reserved. Third prty copyrights re property of their respective owners. Redistriution nd use in source nd inry forms, with or without modifiction, re permitted provided tht the following conditions re met: Redistriution s of source code must retin the ove copyright notice, this list of conditions nd the following disclimer. Redistriution s in inry form must reproduce the ove copyright notice, this list of conditions nd the following disclimer in the documenttion nd/or other mterils provided with the distriution. The nme of Intel Corportion my not e used to endorse or promote products derived from this softwre without specific prior written permission. This softwre is provided y the copyright holders nd contriutors s is nd ny express or implied wrrnties, including, ut not limited to, the implied wrrnties of merchntility nd fitness for prticulr purpose re disclimed. In no event shll Intel or contriutors e lile for ny direct, indirect, incidentl, specil, exemplry, or consequentil dmges (including, ut not limited to, procurement of sustitute goods or services; loss of use, dt, or profits; or usiness interruption) however cused nd on ny theory of liility, whether in contrct, strict liility, or tort (including negligence or otherwise) rising in ny wy out of the use of this softwre, even if dvised of the possiility of such dmge. All informtion provided relted to future Intel products nd plns is preliminry nd suject to chnge t ny time, without notice. SD is registered trdemrk or trdemrk of SD-3C, LLC. CompctFlsh is registered trdemrk or trdemrk of Sndisk Corportion. Memory Stick is registered trdemrk or trdemrk of Sony Corportion. SmrtMedi is registered trdemrk or trdemrk of Toshi Corportion. MultiMediCrd (MMC) is registered trdemrk or trdemrk of Infineon Technologies AG. xd-picture Crd is registered trdemrk or trdemrk of Fuji Photo Film Co. Ltd. IBM is registered trdemrk or trdemrk of Interntionl Business Mchines Corportion. Microsoft, Windows nd Windows Vist re registered trdemrks or trdemrks of Microsoft Corportion. Ech compny whose softwre title is mentioned in this mnul hs Softwre License Agreement specific to its proprietry progrms. All other rnds nd product nmes mentioned in this mnul re registered trdemrks of their respective compnies. However, the explntions for mrkings such s nd re not clerly descried within the text.

3 INTRODUCTION INTRODUCTION Thnk you for purchsing this mchine. Before using this mchine, crefully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the correct opertion of the vrious functions. In ddition, fter you hve finished reding this mnul, store it where it cn quickly e ccessed for future reference. IMPORTANT SAFETY INSTRUCTIONS Plese red these sfety instructions efore ttempting to use the mchine. DANGER - To reduce the risk of electricl shock 1 Alwys unplug the mchine from the electricl outlet immeditely fter using, when clening, mking ny user servicing djustments mentioned in this mnul, or if you re leving the mchine unttended. WARNING - To reduce the risk of urns, fire, electricl shock, or injury to persons. 2 Alwys unplug the mchine from the electricl outlet when mking ny djustments mentioned in the instruction mnul. To unplug the mchine, switch the mchine to the symol O position to turn it off, then grsp the plug nd pull it out of the electricl outlet. Do not pull on the cord. Plug the mchine directly into the electricl outlet. Do not use n extension cord. Alwys unplug your mchine if the power is cut. 3 Electricl Hzrds: This mchine should e connected to n AC power source within the rnge indicted on the rting lel. Do not connect it to DC power source or inverter. If you re not sure wht kind of power source you hve, contct qulified electricin. This mchine is pproved for use in the country of purchse only. 4 Never operte this mchine if it hs dmged cord or plug, if it is not working properly, hs een dropped or dmged, or wter is spilled on the unit. Return the mchine to the nerest uthorized retiler for exmintion, repir, electricl or mechnicl djustment. While the mchine is stored or in use if you notice nything unusul, such s n odor, het, discolortion or deformtion, stop using the mchine immeditely nd unplug the power cord. When trnsporting the mchine, e sure to crry it y its hndle. Lifting the mchine y ny other prt my dmge the mchine or result in the mchine flling, which could cuse injuries. When lifting the mchine, e creful not to mke ny sudden or creless movements, otherwise you my injure your ck or knees. B-1

4 IMPORTANT SAFETY INSTRUCTIONS 5 Alwys keep your work re cler: Never operte the mchine with ny ir openings locked. Keep ventiltion openings of the mchine nd foot control free from the uild up of lint, dust, nd loose cloth. Do not use extension cords. Plug the mchine directly into the electricl outlet. Never drop or insert foreign ojects in ny opening. Do not operte where erosol (spry) products re eing used or where oxygen is eing dministered. Do not use the mchine ner het source, such s stove or iron; otherwise, the mchine, power cord or grment eing sewn my ignite, resulting in fire or n electric shock. Do not plce this mchine on n unstle surfce, such s n unstedy or slnted tle, otherwise the mchine my fll, resulting in injuries. 6 Specil cre is required when emroidering: Alwys py close ttention to the needle. Do not use ent or dmged needles. Keep fingers wy from ll moving prts. Specil cre is required round the mchine needle. Switch the mchine to the symol O position to turn it off when mking ny djustments in the needle re. Do not use dmged or incorrect needle plte, s it could cuse the needle to rek. Do not push or pull the fric when emroidering. 7 This mchine is not toy: Your close ttention is necessry when the mchine is used y or ner children. The plstic g tht this mchine ws supplied in should e kept out of the rech of children or disposed of. Never llow children to ply with the g due to the dnger of suffoction. Do not use outdoors. 8 For longer service life: When storing this mchine, void direct sunlight nd high humidity loctions. Do not use or store the mchine ner spce heter, iron, hlogen lmp, or other hot ojects. Use only neutrl sops or detergents to clen the cse. Benzene, thinner, nd scouring powders cn dmge the cse nd mchine, nd should never e used. Alwys consult the opertion mnul when replcing or instlling ny ssemlies, the presser feet, needle, or other prts to ssure correct instlltion. 9 For repir or djustment: If the light unit is dmged, it must e replced y n uthorized retiler. In the event mlfunction occurs or djustment is required, first follow the trouleshooting tle in the ck of the opertion mnul to inspect nd djust the mchine yourself. If the prolem persists, plese consult your locl uthorized By Lock retiler. Use this mchine only for its intended use s descried in the mnul. Use ccessories recommended y the mnufcturer s contined in this mnul. Use only the interfce cle (USB cle) included with this mchine. Use only the mouse designed specificlly for this mchine. Use only the sensor pen included with this mchine. The contents of this mnul nd specifictions of this product re suject to chnge without notice. For dditionl product informtion nd updtes, visit our wesite t B-2

5 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This mchine is intended for household use. This pplince is not intended for use y persons (including children) with reduced physicl, sensory or mentl cpilities, or lck of experience nd knowledge, unless they hve een given supervision or instruction concerning use of the pplince y person responsile for their sfety. Children should e supervised to ensure tht they do not ply with the pplince. IMPORTANT FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY In the event of replcing the plug fuse, use fuse pproved y ASTA to BS 1362, i.e. crrying the mrk, rting s mrked on plug. Alwys replce the fuse cover. Never use plugs with the fuse cover omitted. If the ville electricl outlet is not suitle for the plug supplied with this equipment, you should contct your uthorized retiler to otin the correct led. B-3

6 IMPORTANT SAFETY INSTRUCTIONS Federl Communictions Commission (FCC) Declrtion of Conformity (For USA Only) Responsile Prty: Tcony Corportion 1760 Gilsinn Lne, Fenton, Missouri USA declres tht the product Product Nme: Model Numer: By Lock Sewing Mchine BLPY This device complies with Prt 15 of the FCC Rules. Opertion is suject to the following two conditions: (1) this device my not cuse hrmful interference, nd (2) this device must ccept ny interference received, including interference tht my cuse undesired opertion. This equipment hs een tested nd found to comply with the limits for Clss B digitl device, pursunt to Prt 15 of the FCC Rules. These limits re designed to provide resonle protection ginst hrmful interference in residentil instlltion. This equipment genertes, uses, nd cn rdite rdio frequency energy nd, if not instlled nd used in ccordnce with the instructions, my cuse hrmful interference to rdio communictions. However, there is no gurntee tht interference will not occur in prticulr instlltion. If this equipment does cuse hrmful interference to rdio or television reception, which cn e determined y turning the equipment off nd on, the user is encourged to try to correct the interference y one or more of the following mesures: Reorient or relocte the receiving ntenn. Increse the seprtion etween the equipment nd receiver. Connect the equipment into n outlet on circuit different from tht to which the receiver is connected. Consult the retiler or n experienced rdio/tv technicin for help. The included interfce cle should e used in order to ensure complince with the limits for Clss B digitl device. Chnges or modifictions not expressly pproved y Tcony Corportion could void the user s uthority to operte the equipment. B-4

7 OUTSTANDING FEATURES OUTSTANDING FEATURES Sensor Function - Automtic Pttern Plcement LED Pointer Shows You the Needle Drop Position When emroidering, you cn set the pttern position quickly with the utomtic positioning function using the sensor pen. See USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE on pge B-60. Included Emroidery foot with LED pointer indictes the needle drop position, y using red LED light. The LED pointer indictes where the needle drop point will e so tht it is esier to djust the emroidery loction. See CHANGING THE EMBROIDERY FOOT on pge B-46. B-5

8 WHAT YOU CAN DO WITH THIS MACHINE WHAT YOU CAN DO WITH THIS MACHINE B Bsic opertions After purchsing your mchine, e sure to red this section first. This section provides detils on the initil setup procedures s well s descriptions of this mchine s more useful functions. Chpter 1 Getting Redy To lern the opertion of the principl prts nd the screens Pge B-16 Chpter 2 Sensor Functions Try the new function using the supplied sensor pen Pge B-54 E Emroidering This section gives instruction on how to emroider designs with this mchine. Chpter 1, Emroidery, provides detils on sewing emroidery ptterns stored on the mchine s well s ptterns tht hve een imported. Chpter 2, Emroidery Edit, provides detils on editing emroidery ptterns to crete custom emroidery. Chpter 3, How to Crete Boin Work (Emroidery) gives instruction on creting dimensionl emroidery. Chpter 1 Emroidery Mximum 30 cm 18 cm (pprox. 12 inches 7 inches) for lrge emroidery designs Pge E-2 Chpter 2 Emroidery Edit Designs cn e comined, rotted or enlrged Pge E-56 Chpter 3 How to Crete Boin Work (Emroidery) Wind medium to hevy weight thred on oin for three-dimensionl ppernce. Pge E-86 A Appendix This section provides importnt informtion for operting this mchine. Chpter 1 Mintennce nd Trouleshooting Find trouleshooting tips nd pointers s well s how to keep your mchine in the est working order. Pge A-2 B-6

9 Contents CONTENTS TRADEMARKS INTRODUCTION... 1 IMPORTANT SAFETY INSTRUCTIONS... 1 OUTSTANDING FEATURES... 5 WHAT YOU CAN DO WITH THIS MACHINE... 6 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS... 9 Mchine... 9 Needle nd Presser Foot Section Emroidery Unit Opertion Buttons Included Accessories Options B Bsic opertions Chpter1 Getting Redy 16 TURNING THE MACHINE ON/OFF Setting Your Mchine for the First Time LCD SCREEN Using the Mchine Setting Mode Key Using the Mchine Help Key LOWER THREADING Winding the Boin Setting the Boin UPPER THREADING Upper Threding Pulling Up the Boin Thred Using Threds tht Unwind Quickly BEFORE EMBROIDERING Emroidery Step y Step Aout the Emroidery Unit CHANGING THE EMBROIDERY FOOT Removing the Emroidery Foot Attching the Emroidery Foot CHANGING THE NEEDLE Aout the Needle USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Using USB Medi or Emroidery Crd Reder/USB Crd Writer Module* Connecting the Mchine to the Computer Using USB Mouse Chpter2 Sensor Functions 54 CONNECTING THE SENSOR PEN Using the Sensor Pen Holder USING THE SENSOR PEN Using the Sensor Pen Importnt Informtion out Sensor Pen Clirting the Sensor Pen USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE Specifying the Emroidering Position With the Sensor Pen E Emroidering Chpter1 Emroidery 2 SELECTING PATTERNS... 3 Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet/Boin Work Ptterns... 4 Selecting Chrcter Ptterns... 5 Selecting Frme Ptterns... 7 Selecting Ptterns from Emroidery Crds... 7 Selecting Ptterns from USB Medi/Computer... 8 VIEWING THE EMBROIDERING SCREEN... 9 PREPARING THE FABRIC Attching Iron-on Stilizers (Bcking) to the Fric Hooping the Fric in the Emroidery Frme Emroidering Smll Frics or Fric Edges ATTACHING THE EMBROIDERY FRAME CONFIRMING THE PATTERN POSITION Checking the Pttern Position Previewing the Completed Pttern SEWING AN EMBROIDERY PATTERN Emroidering Attrctive Finishes Sewing Emroidery Ptterns Sewing Emroidery Ptterns Which Use Appliqué ADJUSTMENTS DURING THE EMBROIDERY PROCESS If the Boin Runs Out of Thred If the Thred Breks During Sewing Restrting from the Beginning Resuming Emroidery After Turning Off the Power MAKING EMBROIDERY ADJUSTMENTS Adjusting Thred Tension Adjusting the Boin Cse (with No Color on the Screw) Using the Automtic Thred Cutting Function (END COLOR TRIM) Using the Thred Trimming Function (JUMP STITCH TRIM) Adjusting the Emroidery Speed Chnging the Thred Color Disply Chnging the Emroidery Frme Disply REVISING THE PATTERN Moving the Pttern Aligning the Pttern nd the Needle Chnging the Size of the Pttern Rotting the Pttern Creting Horizontl Mirror Imge Enlrging the Editing Screen Chnging the Density (Alphet Chrcter nd Frme Ptterns Only) Chnging the Colors of Alphet Chrcter Ptterns Emroidering Linked Chrcters Uninterrupted Emroidering (Monochrome - Using Single Color) USING THE MEMORY FUNCTION Emroidery Dt Precutions Sving Emroidery Ptterns in the Mchine s Memory Sving Emroidery Ptterns to USB Medi Sving Emroidery Ptterns in the Computer Retrieving Ptterns from the Mchine s Memory Reclling from USB Medi Reclling from the Computer EMBROIDERY APPLICATIONS Using Frme Pttern to Mke n Appliqué (1) Using Frme Pttern to Mke n Appliqué (2) Sewing Split Emroidery Ptterns Chpter2 Emroidery Edit 56 EXPLANATION OF FUNCTIONS SELECTING PATTERNS TO EDIT Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet Ptterns/Frme/Boin Work Ptterns Selecting Alphet Chrcter Ptterns EDITING PATTERNS Moving the Pttern B-7

10 CONTENTS Rotting the Pttern Chnging the Size of the Pttern Deleting the Pttern Displying Ptterns in the Screen Mgnified y 200% Chnging the Configurtion of Chrcter Ptterns Chnging Chrcter Spcing Reducing Chrcter Spcing Seprting Comined Chrcter Ptterns Chnging the Color of Ech Alphet Chrcter in Pttern Emroidering Linked Chrcters Chnging the Thred Color Creting Custom Thred Tle Choosing Color from the Custom Thred Tle Designing Repeted Ptterns Emroidering the Pttern Repetedly Duplicting Pttern After Editing COMBINING PATTERNS Editing Comined Ptterns Sewing Comined Ptterns VARIOUS EMBROIDERING FUNCTIONS Uninterrupted Emroidering (Monochrome - Using Single Color) Bsting Emroidery USING THE MEMORY FUNCTION Chpter3 How to Crete Boin Work (Emroidery) 86 ABOUT BOBBIN WORK PREPARING FOR BOBBIN WORK Required Mterils Upper Threding Prepring the Boin Thred CREATING BOBBIN WORK Selecting the Pttern Strt Emroidering ADJUSTING THE THREAD TENSION TROUBLESHOOTING A Appendix Chpter1 Mintennce nd Trouleshooting 2 CARE AND MAINTENANCE... 3 Restrictions on oiling... 3 Precutions on storing the mchine... 3 Clening the LCD Screen... 3 Clening the Mchine Csing... 3 Clening the Rce... 3 Clening the Cutter in the Boin Cse Are... 5 Aout the Mintennce Messge... 5 ADJUSTING THE SCREEN... 6 Adjusting the Brightness of the Screen Disply... 6 Touch Pnel is Mlfunctioning... 6 TROUBLESHOOTING... 7 ERROR MESSAGES SPECIFICATIONS UPGRADING YOUR MACHINE S SOFTWARE Upgrde Procedure Using USB Medi Upgrde Procedure Using Computer INDEX B-8

11 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS The nmes of the vrious prts of the mchine nd their functions re descried elow. Before using the mchine, crefully red these descriptions to lern the nmes of the mchine prts. Mchine Front View Right-side/Rer View Top cover Open the top cover to thred the mchine nd wind the oin. Pre-tension disk Pss the thred round the pre-tension disk when winding the oin thred. (pge B-31) c Thred guide for oin winding Pss the thred through this thred guide when winding the oin thred. (pge B-31) d Spool pin Plce spool of thred on the spool pin. (pge B-38) e Spool cp Use the spool cp to hold the spool of thred in plce. (pge B-38) f Supplementl spool pin Use this spool pin to wind the oin thred. (pge B-31) g Boin winder Use the oin winder when winding the oin. (pge B-31) h LCD (liquid crystl disply) Settings for the selected pttern nd error messges pper in the LCD. (pge B-20) i Speker j Opertion uttons (5 uttons) Use these uttons to operte the mchine. (pge B-11) k Emroidery unit Attch the emroidery unit to emroider (pge B-44). l Thred cutter Pss the threds through the thred cutter to cut them. (pge B-40) m Thred guide plte Pss the thred round the thred guide plte when threding upper thred. (pge B-38) Connector for the presser foot Connect the emroidery foot W+ with LED pointer. (The emroidery foot W+ with LED pointer is optionl on certin models.) (pge B-46) Hndle Crry the mchine y its hndle when trnsporting the mchine. c Presser foot lever Rise nd lower the presser foot lever to rise nd lower the presser foot. (pge B-46) d Air vent The ir vent llows the ir surrounding the motor to circulte. Do not cover the ir vent while the mchine is eing used. e Min power switch Use the min power switch to turn the mchine ON nd OFF. (pge B-17) f Power cord receptcle Insert the power cord into the mchine receptcle. (pge B-17) g Sensor pen holder connector Connect the included sensor pen holder. (pge B-55) h Sensor pen jck Connect the sensor pen. (pge B-55) i USB port for computer In order to import/export ptterns etween computer nd the mchine, plug the USB cle into the USB port. (pge B-51, E-48) j USB port for mouse / medi In order to send ptterns from/to USB medi, plug the USB medi directly into the USB port. (pge B-50, E-47) Connect the USB mouse to operte with mouse. (pge B-51) k Hndwheel Rotte the hndwheel towrd you (counterclockwise) to rise nd lower the needle. The wheel should e turned towrd the front of the mchine. B-9

12 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle nd Presser Foot Section Emroidery Unit Emroidery foot screw Use the emroidery foot screw to hold the emroidery foot in plce. (pge B-46) Emroidery foot The emroidery foot helps control fric flexiility for etter stitch consistency. Use the W+ emroidery foot for most mchine emroidering. (pge B-46) c Boin cover Open the oin cover to set the oin. (pge B-36) d Needle plte cover Remove the needle plte cover to clen the rce. (pge E-22) e Needle plte f Needle r thred guide Pss the upper thred through the needle r thred guide. (pge B-38) g Needle clmp screw Use the needle clmp screw to hold the needle in plce. (pge B-49) Crrige The crrige moves the emroidery frme utomticlly when emroidering. (pge B-44) Relese utton (locted under the emroidery unit) Press the relese utton to remove the emroidery unit. (pge B-44) c Emroidery frme holder Insert the emroidery frme into the emroidery frme holder to hold the frme in plce. (pge E-17) d Frme-securing lever Press the frme-securing lever down to secure the emroidery frme. (pge E-17) e Emroidery unit connection Insert the emroidery unit connection into the connection port when ttching the emroidery unit. (pge B-44) CAUTION Before inserting or removing the emroidery unit, turn the min power to OFF. After the emroidery frme is set in the frme holder, e sure the frme-securing lever is correctly lowered. B-10

13 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Opertion Buttons Strt/Stop utton / Press this utton to egin emroidering. The utton chnges color ccording to the mchine s opertion mode. Green: The mchine is redy to emroider or is emroidering. Red: The mchine cnnot emroider. Needle Position utton Press this utton to rise or lower the needle. c Thred Cutter utton Press this utton fter emroidering to utomticlly trim the excess thred. d Presser Foot Lifter utton Press this utton to lower the emroidery foot nd pply pressure to the fric. Press this utton gin to rise the emroidery foot. e Automtic Threding utton Use this utton to utomticlly thred the needle. CAUTION Do not press the thred cutter utton fter the threds hve een cut. The needle my rek nd threds my ecome tngled, or dmge to the mchine my occur. B-11

14 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Included Accessories /11 3 needles 90/14 1 needle 75/11 2 needles B-12

15 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS No. Prt Nme Prt Code 1 Emroidery foot W+ with LED pointer (on mchine) XF Needle set X Bll point needle set XD Boin 10 (One is on mchine.) X Sem ripper XF Scissors XC Clening rush X Screwdriver (smll) X Screwdriver (lrge) XC Disc-shped screwdriver XC Verticl spool pin XC Spool cp (smll) Spool cp (medium) 2 (One is on mchine.) X Spool cp (lrge) Spool cp (mini insert) XA Spool felt (on mchine) X Spool net 2 XA Emroidery needle plte cover XE Touch pen (stylus) XA USB cle XD Boin cse XC (no color on the screw) (on mchine) 22 Boin cse (gry, for oin XE work) 23 Boin center pin nd XF instruction sheet 24 Boin cover (on mchine) XE Emroidery frme set (lrge) H 180 mm W 130 mm (H 7 inches W 5 inches) 26 Emroidery frme set (extr lrge) H 300 mm W 180 mm (H 12 inches W 7 inches) EF75: Frme EF79: Emroidery sheet EF76: Frme EF80: Emroidery sheet 27 Emroidery oin thred BBTE-W 28 Stilizer mteril X Power cord XC Sensor pen XF Pen holder XF Dust cover XF Accessory g XC Instruction nd Reference XF Guide 35 Quick Reference Guide XF Memo Alwys use ccessories recommended for this mchine. Included ccessory my vry depending on the country or region. B-13

16 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Options The following re ville s optionl ccessories to e purchsed seprtely from your uthorized By Lock retiler No. Prt Nme Prt Code 1 Squre emroidery frme H 150 mm W 150 mm (H 6 inches x W 6 inches) BLMA Emroidery frme set (smll) H 20 mm W 60 mm (H 1 inch W 2-1/2 inches) 3 Emroidery frme set (medium) H 100 mm W 100 mm (H 4 inches W 4 inches) 4 Emroidery foot with mid shnk 5 Border emroidery frme H 300 mm W 100 mm (H 12 inches x W 4 inches) 6 Border emroidery frme set H 180 mm W 100 mm (H 7 inches W 4 inches) EF73: Frme EF77: Emroidery sheet EF74: Frme EF78: Emroidery sheet XF BLMA-CBH BLSO-BF 7 10 spool stnd BLMA-TS 8 King spool thred stnd BLMA-STS 9 Emroidery crd Reder BLECR 10 Boin work kit BL-BWA 11 USB mouse XE Memo All specifictions re correct t the time of printing. Plese e wre tht some specifictions my chnge without notice. Emroidery crds purchsed in foreign countries my not work with your mchine. Visit your nerest uthorized By Lock retiler for complete listing of optionl ccessories nd emroidery crds ville for your mchine. B-14

17 Bsic opertions This section provides detils on the initil setup procedures s well s descriptions of this mchine s more useful functions. Pge numer strts with B in this section. Chpter1 Getting Redy...B-16 Chpter2 Sensor Functions...B-54

18 BBsic opertions Chpter 1 Getting Redy TURNING THE MACHINE ON/OFF...17 Setting Your Mchine for the First Time...18 LCD SCREEN...20 Home Pge Screen Key Functions Using the Mchine Setting Mode Key...22 Selecting the Eco Mode or Shutoff Support Mode Chnging the Pointer Shpe When USB Mouse Is Used Selecting the Initil Screen Disply Choosing the Disply Lnguge Chnging the Bckground Colors of the Emroidery Ptterns Specifying the Size of Pttern Thumnils Sving Settings Screen Imge to USB Medi Using the Mchine Help Key...29 LOWER THREADING...31 Winding the Boin...31 Using the Supplementl Spool Pin Using the Spool Pin Untngling Thred from Beneth the Boin Winder Set Setting the Boin...36 UPPER THREADING...38 Upper Threding...38 Pulling Up the Boin Thred...41 Using Threds tht Unwind Quickly...42 Using the Spool Net BEFORE EMBROIDERING...43 Emroidery Step y Step...43 Aout the Emroidery Unit...44 Attching the Emroidery Unit Removing the Emroidery Unit CHANGING THE EMBROIDERY FOOT...46 Removing the Emroidery Foot...46 Attching the Emroidery Foot...46 Checking the Needle Drop Point With the Emroidery Foot W+ with LED Pointer Adjusting the LED Pointer Adjusting the Brightness of the LED Pointer CHANGING THE NEEDLE...49 Aout the Needle...50 USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE...50 Using USB Medi or Emroidery Crd Reder/USB Crd Writer Module*...50 Connecting the Mchine to the Computer...51 Using USB Mouse...51 Clicking Key Chnging Pges... 52

19 TURNING THE MACHINE ON/OFF TURNING THE MACHINE ON/OFF WARNING Use only regulr household electricity for the power source. Using other power sources my result in fire, electric shock, or dmge to the mchine. Mke sure tht the plugs on the power cord re firmly inserted into the electricl outlet nd the power cord receptcle on the mchine. Do not insert the plug on the power cord into n electricl outlet tht is in poor condition. Turn the min power to OFF nd remove the plug in the following circumstnces: When you re wy from the mchine After using the mchine When the power fils during use When the mchine does not operte correctly due to d connection or disconnection During electricl storms B 1 Getting Redy CAUTION Use only the power cord included with this mchine. Do not use extension cords or multi-plug dpters with mny other pplinces plugged in to them. Fire or electric shock my result. Do not touch the plug with wet hnds. Electric shock my result. When unplugging the mchine, lwys turn the min power to OFF first. Alwys grsp the plug to remove it from the outlet. Pulling on the cord my dmge the cord, or led to fire or electric shock. Do not llow the power cord to e cut, dmged, modified, forcefully ent, pulled, twisted, or undled. Do not plce hevy ojects on the cord. Do not suject the cord to het. These things my dmge the cord, or cuse fire or electric shock. If the cord or plug is dmged, tke the mchine to your uthorized retiler for repirs efore continuing use. Unplug the power cord if the mchine is not to e used for long period of time. Otherwise, fire my result. When leving the mchine unttended, either the min switch of the mchine should e turned to OFF or the plug must e removed from the socket-outlet. When servicing the mchine or when removing covers, the mchine must e unplugged. For U.S.A. only This pplince hs polrized plug (one lde wider thn the other). To reduce the risk of electricl shock, this plug is intended to fit in polrized outlet only one wy. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contct qulified electricin to instll the proper outlet. Do not modify the plug in ny wy. Bsic opertions B-17

20 TURNING THE MACHINE ON/OFF Insert the power supply cord into the power cord receptcle, then insert the plug into wll outlet. Setting Your Mchine for the First Time When you first turn on the mchine, set the lnguge nd time/dte to your lnguge nd locl time/dte. Follow the procedure elow when the settings screen ppers utomticlly. Press nd to set your locl lnguge. Min power switch Power supply cord Turn the min power switch to I to turn on the mchine. Press. OFF ON Memo When the mchine is turned on, it will mke n ctivtion sound; this is not mlfunction. The messge screen, confirming if you wnt c to set time/dte, ppers. To set the time/dte, press ; to cncel the setting, press. The screen to set time/dte ppers. c d When the mchine is turned on, the opening movie is plyed. Touch nywhere on the screen to disply the Home pge screen. CAUTION Only touch the screen with your finger or the included touch pen. Do not use shrp pencil, screwdriver, or other hrd or shrp oject. It is not necessry to press hrd on the screen. Pressing too hrd or using shrp oject my dmge the screen. Turn the min power switch to O to turn off the mchine. B-18

21 TURNING THE MACHINE ON/OFF d Press or to set time/dte. c d B 1 Getting Redy Press to disply the time on the screen. Set the yer (YYYY), month (MM) nd dte (DD). c Select whether 24h or 12h setting to disply. d Set the current time. e Press to strt using your mchine. The clock strts from 0 second of the time you set. The time/dte you set my e clered, if you don t turn on the mchine for certin period. Bsic opertions B-19

22 LCD SCREEN LCD SCREEN CAUTION Only touch the screen with your finger or the included touch pen. Do not use shrp pencil, screwdriver, or other hrd or shrp oject. It is not necessry to press hrd on the screen. Pressing too hrd or using shrp oject my dmge the screen. Home Pge Screen No. Disply Key Nme Explntion Pge Emroidery key After the emroidery unit is ttched, press this key to emroider ptterns. E-3 Emroidery Edit key Press this key to comine emroidery ptterns. With the Emroidery Edit functions, you cn lso crete originl emroidery ptterns or frme ptterns. E-57 B-20

23 LCD SCREEN Key Functions B 1 Getting Redy e d c No. Disply Key Nme Explntion Pge Home pge screen Press this key nytime it is displyed to return to the home pge screen nd B-20 key select different ctegory - Emroidery or Emroidery Edit. Clock key Press this key to set the clock to your locl time. B-18 c Presser foot/needle exchnge key Press this key efore chnging the needle, the presser foot, etc. This key locks ll key nd utton functions to prevent opertion of the mchine. d Mchine help key Press this key to see explntions on how to use the mchine. B-29 B-46 to B-49 e Mchine setting mode key Press this key to chnge the needle stop position, chnge the volume of opertion sound, djust the pttern or screen, nd chnge other mchine settings. For dditionl opertionl informtion, refer to pge reference numer listed ove. B-22 Bsic opertions B-21

24 LCD SCREEN Using the Mchine Setting Mode Key Press disply, etc.). to chnge the defult mchine settings (needle stop position, emroidery speed, opening Memo Press or next to the pge numers, to disply different settings screen. c d e f g h i i Select the needle stop position (the needle position when the mchine is not operting) to e up or down. Select the opertion of the Needle Position Stitch Plcement utton from the following two sequences. Ech press of the Needle Position Stitch Plcement utton: ON rises the needle, stops it t nerly lowered position, then lowers it OFF rises the needle, then lowers it c Chnge the shpe of the pointer when USB mouse is used (see pge B-25). d Turn the Upper nd Boin Thred Sensor ON or OFF. If it is turned OFF, the mchine cn e used without thred. (see pge E-26) CAUTION If Upper nd Boin Thred Sensor is set to OFF, remove the upper thred. If the mchine is used with the upper thred threded, the mchine will not e le to detect if the thred hs ecome tngled. Continuing to use the mchine with tngled thred my cuse dmge. e Chnge the speker volume. Increse the numer for louder volume, decrese for softer volume. f Select to sve the mchine power y setting the Eco Mode or the Shutoff Support Mode (see pge B-25). g Select the initil screen tht is displyed when the mchine is turned on (see pge B-25). h Chnge the disply lnguge (see pge B-26). i Press to sve the current settings screen imge to USB medi (see pge B-28). B-22

25 LCD SCREEN j k l B 1 m n o Getting Redy j Chnge the rightness of the needle re nd work re lights. k Chnge the screen disply rightness (see pge A-6). l Clirte the sensor function (see pge B-58). m Disply the totl numer of stitches sewn on this mchine, which is reminder to tke your mchine in for regulr servicing. (Contct your uthorized retiler for detils.) n The No. is the internl mchine numer for the mchine. o Disply the progrm version. Version 1 shows the progrm version of the LCD pnel, Version 2 shows the progrm version of the mchine. Memo The ltest version of softwre is instlled in your mchine. Check with your locl uthorized By Lock retiler or t for ville updtes (see pge A-14). Bsic opertions B-23

26 LCD SCREEN p q r s t u v w x y z Q R p Select from mong 16 emroidery frme displys (see pge E-35). q Chnge the thred color disply on the Emroidery screen; thred numer, color nme (see pge E-34). r When the thred numer #123 is selected, select from six thred rnds (see pge E-34). s Adjust the mximum emroidery speed setting (see pge E-33). t Adjust the upper thred tension for emroidering (see pge E-30). u Select the height of the emroidery foot during emroidering (see pge E-11). v Chnge the initil mode of the disply (Emroidery/Emroidery Edit) (see pge E-4). w Chnge the color of the ckground for the emroidery disply re (see pge B-26). x Chnge the color of the ckground for the thumnil re (see pge B-26). y Press to specify the size of pttern thumnils (see pge B-27). z Chnge the disply units from metric to stndrd mesurements (mm/inch). Q Adjust the distnce etween the pttern nd the sting stitching (see pge E-84). R Adjusting the position nd rightness of the emroidery foot with LED pointer (see pge B-48). B-24

27 LCD SCREEN Selecting the Eco Mode or Shutoff Support Mode You cn sve the mchine power y setting the eco mode or the shutoff support mode. If you leve the mchine without using for specified period of time, the mchine enters in one of these modes. Eco Mode ; Mchine will enter sleep mode. Touch the screen or ny opertionl utton to continue sewing. Shutoff Support Mode ; Mchine will turn off fter set period of time. Turn mchine off nd then ck on to restrt sewing. Condition Eco Mode Shutoff Support Mode Aville time (minute) 1-12 (hour) Strt/Stop utton Green flshing Green slow flshing Suspended function Mchine light, Screen disply, LED pointer All functions After recovering The mchine strts from the previous opertion. You need to turn off the mchine. Press the Strt/Stop utton or touch the screen disply to recover from these modes. Chnging the Pointer Shpe When USB Mouse Is Used In the settings screen, the shpe cn e selected for the pointer tht ppers when USB mouse is connected. Depending upon the ckground color, select the desired shpe from the three tht re ville. Memo For detils on chnging the ckground color, refer to Chnging the Bckground Colors of the Emroidery Ptterns on pge B-26. Press. The settings screen ppers. Disply pge 1 of the settings screen. Use or to choose the pointer shpe c from the three settings ville (, nd ). B 1 Getting Redy Press. The settings screen ppers. Disply pge 2 of the settings screen. Use or to select the time until c entering the mode. d Press to return to the originl screen. Memo The setting remins selected even if the mchine is turned off. Selecting the Initil Screen Disply The Initil screen tht ppers on the mchine cn e chnged. If you turn off the mchine while the mchine is in the Eco Mode or the Shutoff Support Mode, wit for out 5 seconds efore turning on the mchine gin. Press. The settings screen ppers. Disply pge 2 of the settings screen. Bsic opertions B-25

28 LCD SCREEN c Use or to select the setting for the initil screen disply. * Opening Screen: When the mchine is turned on, the home pge screen ppers fter the opening movie screen is touched. * Home Pge: When the mchine is turned on, the home pge screen ppers. * Emroidery Screen: When the mchine is turned on, the Emroidery screen ppers if the emroidery unit is ttched to the mchine. Chnging the Bckground Colors of the Emroidery Ptterns In the settings screen, the ckground colors cn e chnged for the emroidery pttern nd pttern thumnils. Depending on the pttern color, select the desired ckground color from the 66 settings ville. Different ckground colors cn e selected for the emroidery pttern nd pttern thumnils. Press. The settings screen ppers. Disply pge 6 of the settings screen. c Press. d Press to return to the originl screen. Choosing the Disply Lnguge Press. The settings screen ppers. Disply pge 2 of the settings screen. Use nd to choose the disply c lnguge. * Select from English, Deutsch (Germn), Frnçis (French), Itlino (Itlin), Nederlnds (Dutch), Espñol (Spnish), (Jpnese), Dnsk (Dnish), Norsk (Norwegin), Suomi (Finnish), Svensk (Swedish), Português (Portuguese), nd Русский (Russin). Emroidery pttern ckground Pttern thumnils ckground Disply lnguge d Press to return to the originl screen. B-26

29 d Select the ckground color from the 66 settings ville. Specifying the Size of Pttern Thumnils LCD SCREEN The thumnils for selecting n emroidery pttern cn e set to e displyed t the smller size or lrger size. The lrger size is 1.5 times the smller size. B 1 Getting Redy Emroidery pttern ckground Selected color Press. The settings screen ppers. Disply pge 6 of the settings screen. Pttern thumnils ckground Selected color e Press to return to the originl screen. Memo The setting remins selected even if the mchine is turned off. Bsic opertions B-27

30 LCD SCREEN c Press or to select the desired thumnil size. Sving Settings Screen Imge to USB Medi An imge of the settings screen cn e sved s BMP file. A mximum of 100 imges cn e sved on single USB medi t one time. Insert the USB medi into the USB port on the right side of the mchine. When thumnil size setting hs een chnged the pttern selection screen will not immeditely reflect the chosen size. To view the ptterns with the new thumnil size, return to the ctegory selection screen, nd then select the pttern ctegory gin. USB port USB medi Press. The settings screen ppers. Select the settings screen pge, mke the chnges tht you wnt, nd then sve the screen imge. c Press. The imge file will e sved to the USB medi. d Remove the USB medi, nd then for future reference, check the sved imge using computer. The files for Settings screen imges re sved with the nme S##.BMP. * ## in the nme S##.BMP will utomticlly e replced with numer etween S00 nd S99. If 100 imge files hve lredy een sved on the USB medi, the following messge ppers. In this cse, delete file from the USB medi or use different USB medi. B-28

31 LCD SCREEN Using the Mchine Help Key Press to open the mchine help screen. Five ctegories re displyed t the top of the screen. Press key to see more informtion out tht ctegory. B 1 Getting Redy displys informtion out the opertion uttons. displys informtion out threding the mchine, etc. Some of the functions re descried in the movies. Wtch these movies for etter understnding of the functions. Certin individul threding screens re nimted. displys informtion out ttching the emroidery unit, chnging emroidery feet, prepring fric for emroidering, checking the tension, etc. informtion. displys trouleshooting displys informtion out clening the mchine, etc. Bsic opertions B-29

32 LCD SCREEN Exmple: Displying informtion out upper threding Press. Press. The lower hlf of the screen will chnge. c Press (upper threding). d The screen shows instructions for threding the mchine. Red the instructions. * To view video, press of the displyed instructions. Press under movie to go ck to the eginning. Press to puse. Press to restrt fter puse. Press movie. * Press to view the next pge. * Press to view the previous pge. to close out the e Press to return to the originl screen. B-30

33 LOWER THREADING LOWER THREADING Winding the Boin Press in this order to disply video exmple of oin winding on the LCD (see pge B-30). Follow the steps explined elow to complete the opertion. Using the Supplementl Spool Pin With this mchine, you cn wind the oin without unthreding the mchine. While using the min spool pin to sew, you cn conveniently wind the oin using the supplementl spool pin. B 1 Getting Redy CAUTION The included oin ws designed specificlly for this mchine. If oins from other models re used, the mchine will not operte correctly. Use only the included oin or oins of the sme type (prt code: X ). * Actul size This model Other models c 11.5 mm (pprox. 7/16 inch) Supplementl spool pin Turn the min power to ON nd open the top cover. Align the groove in the oin with the spring on the oin winder shft, nd set the oin on the shft. Groove in the oin Spring on the shft Bsic opertions B-31

34 LOWER THREADING c Set the supplementl spool pin in the up position. Memo When sewing with fine, cross-wound thred, use the smll spool cp, nd leve smll spce etween the cp nd the thred spool. d Supplementl spool pin Plce the spool of thred on the supplementl spool pin, so tht thred unrolls from the front. Push the spool cp onto the spool pin s fr s possile to secure the thred spool. Spool cp (smll) Thred spool (cross-wound thred) c Spce If spool of thred whose core is 12 mm (1/2 inch) in dimeter nd 75 mm (3 inches) high is inserted onto the spool pin, use the mini spool insert. Spool cp (mini insert) 12 mm (1/2 inch) c 75 mm (3 inches) Spool pin Spool cp c Thred spool CAUTION If the thred spool nd/or spool cp re set incorrectly, the thred my tngle on the spool pin nd cuse the needle to rek. Use the spool cp (lrge, medium, or smll) tht is closest in size to the thred spool. If spool cp smller thn the thred spool is used, the thred my ecome cught in the slit on the end of the spool nd cuse the needle to rek. e With your right hnd, hold the thred ner the thred spool. With your left hnd, hold the end of the thred, nd use oth hnds to pss the thred through the thred guide. Thred guide B-32

35 f Pss the thred round the pre-tension disk mking sure tht the thred is under the pre-tension disk. h LOWER THREADING Pss the end of the thred through the guide slit in the oin winder set, nd pull the thred to the right to cut the thred with the cutter. B 1 Getting Redy g Pre-tension disk Mke sure tht the thred psses under the pre-tension disk. Pre-tension disk c Pull it in s fr s possile. Check to mke sure thred is securely set etween pre-tension disks. Wind the thred clockwise round the oin 5-6 Times. i Guide slit (with uilt-in cutter) Boin winder set CAUTION Be sure to follow the process descried. If the thred is not cut with the cutter, nd the oin is wound, when the thred runs low it my tngle round the oin nd cuse the needle to rek. Set the oin winding switch to the left, until it clicks into plce. Boin winding switch Memo Sliding the oin winding switch to the left switches the mchine into oin winding mode. The oin winding window ppers. Bsic opertions B-33

36 LOWER THREADING j Press. Boin winding strts utomticlly. The oin stops rotting when oin winding is completed. The oin winding switch will utomticlly return to its originl position. k Cut the thred with scissors nd remove the oin. chnges to while the oin is winding. Sty ner the mchine while winding the oin to mke sure the oin thred is eing wound correctly. If the oin thred is wound incorrectly, press immeditely to stop the oin winding. The sound of winding the oin with stiff thred, such s nylon thred for quilting, my e different from the one produced when winding norml thred; however, this is not sign of mlfunction. Memo When removing the oin, do not pull on the oin winder set. Doing so could loosen or remove the oin winder set, nd could result in dmge to the mchine. CAUTION Setting the oin improperly my cuse the thred tension to loosen, reking the needle nd possily resulting in injury. Memo You cn chnge the winding speed y pressing (to decrese) or (to increse) in the oin winding window. Using the Spool Pin You cn use the min spool pin to wind the oin efore sewing. You cnnot use this spool pin to wind the oin while sewing. Press to minimize the oin winding window. Then, you cn perform other opertions, such s selecting pttern or djusting the thred tension, while the oin is eing wound. Press (in top right of the LCD screen) to disply the oin winding window gin. B-34

37 LOWER THREADING Turn the min power to ON nd open the top cover. Align the groove in the oin with the spring on the oin winder shft, nd set the oin on the shft. f Pss the thred through the thred guide. B 1 g Thred guide Pss the thred round the pre-tension disk mking sure tht the thred is under the pre-tension disk. Getting Redy c Groove in the oin Spring on the shft Pivot the spool pin so tht it ngles upwrd. Set the thred spool on the spool pin so tht the thred unwinds from the front of the spool. Thred guide Pre-tension disk d Spool pin Spool cp c Thred spool d Spool felt Push the spool cp onto the spool pin s fr s possile, then return the spool pin to its originl position. h Follow steps g through k on pge B-33 through B-34. Untngling Thred from Beneth the Boin Winder Set If the oin winding strts when the thred is not pssed through the pre-tension disk correctly, the thred my ecome tngled eneth the oin winder set. Wind off the thred ccording to the following procedure. e While holding the thred with oth hnds, pull the thred up from under the thred guide plte. Thred Boin winder set CAUTION Do not remove the oin winder set even if the thred ecomes tngled under the oin winder set. It my result in injuries. Thred guide plte Bsic opertions B-35

38 LOWER THREADING If the thred ecomes tngled under the oin winder set, press once to stop the oin winding. Setting the Boin Press Cut the thred with scissors ner the pre-tension disk. in this order to disply video exmple of the opertion on the LCD (see pge B-30). Follow the steps explined elow to complete the opertion. CAUTION Use oin thred tht hs een correctly wound. Otherwise, the needle my rek or the thred tension will e incorrect. Pre-tension disk c Push the oin winder switch to the right, nd then rise the oin t lest 10 cm (4 inches) from the shft. The included oin ws designed specificlly for this mchine. If oins from other models re used, the mchine will not operte correctly. Use only the included oin or oins of the sme type (prt code: X ). d Cut the thred ner the oin nd hold the thred end with your left hnd. Unwind the thred clockwise ner the oin winder set with your right hnd s shown elow. * Actul size This model Other models c 11.5 mm (pprox. 7/16 inch) Before inserting or chnging the oin, e sure to press in the LCD, otherwise injuries my occur if the Strt/Stop utton or ny other utton is pressed nd the mchine strts sewing. Press. e Wind the oin gin. Mke sure tht the thred psses through the pre-tension disk correctly (pge B-33). B-36

39 LOWER THREADING Slide the oin cover ltch to the right. While lightly holding down oin with e your right hnd s shown, guide the thred through the slit ( nd ). * At this time, check tht the oin esily rottes counterclockwise. Then, pull the thred towrd you to cut it with the cutter (c). B 1 Boin cover Ltch The oin cover opens. Getting Redy Remove the oin cover. c d Insert the oin with your right hnd so tht the end of the thred is on the left, nd then, fter pulling the thred firmly round the t with your left hnd s shown, lightly pull the thred to guide it through the slit. Slit Cutter (Cut the thred with the cutter.) The cutter cuts the thred. Mke sure tht the thred is correctly pssed through the flt spring of the oin cse. If it is not inserted correctly, reinstll the thred. T * Be sure to insert the oin correctly. CAUTION Be sure to instll the oin so tht the thred unwinds in the correct direction, otherwise the thred my rek or the thred tension will e incorrect. Memo The order tht the oin thred should e pssed through the oin cse is indicted y mrks round the oin cse. Be sure to thred the mchine s indicted. f Flt spring 1 CAUTION Be sure to hold down the oin with your finger nd unwind the oin thred correctly. Otherwise, the thred my rek or the thred tension will e incorrect. Insert the t in the lower-left corner of the oin cover (1), nd then lightly press down on the right side to close the cover (2). Bsic opertions B-37

40 UPPER THREADING UPPER THREADING Upper Threding Turn the min power to ON. Press Press the Presser Foot Lifter utton to rise the presser foot. in this order to disply video exmple of the opertion on the LCD (see pge B-30). Follow the steps explined elow to complete the opertion. CAUTION Be sure to thred the mchine properly. Improper threding cn cuse the thred to tngle nd rek the needle, leding to injury. The upper thred shutter opens so the mchine cn e threded. Memo The utomtic threding function cn e used with emroidery mchine needle sizes 75/11 through 90/14. Thred such s trnsprent nylon monofilment thred nd thred with thickness of 130/20 or thicker cnnot e used with the utomtic threding function. c Upper thred shutter Memo This mchine is equipped with n upper thred shutter, llowing you to check tht the upper threding is performed correctly. Press the Needle Position utton to rise the needle. If you try to thred the needle utomticlly without rising the needle, the thred my not thred correctly. B-38

41 d Pivot the spool pin so tht it ngles upwrd. Set the thred spool on the spool pin so tht the thred unwinds from the front of the spool. UPPER THREADING Memo When sewing with fine, cross-wound thred, use the smll spool cp, nd leve smll spce etween the cp nd the thred spool. B 1 e Spool pin Spool cp c Thred spool d Spool felt Push the spool cp onto the spool pin s fr s possile, then return the spool pin to its originl position. Spool cp (smll) Thred spool (cross-wound thred) c Spce If spool of thred whose core is 12 mm (1/2 inch) in dimeter nd 75 mm (3 inches) high is inserted onto the spool pin, use the mini spool insert. Getting Redy CAUTION If the thred spool nd/or spool cp re set incorrectly, the thred my tngle on the spool pin nd cuse the needle to rek. Use the spool cp (lrge, medium, or smll) tht is closest in size to the thred spool. If spool cp smller thn the thred spool is used, the thred my ecome cught in the slit on the end of the spool nd cuse the needle to rek. f Spool cp (mini insert) 12 mm (1/2 inch) c 75 mm (3 inches) While holding the thred with oth hnds, pull the thred up from under the thred guide plte. g Thred guide plte While holding the thred in your right hnd, pss the thred through the thred guide in the direction indicted. Bsic opertions B-39

42 UPPER THREADING h Guide the thred down, up, then down through the groove, s shown in the illustrtion. k Pss the thred through the thred guide disks (mrked 7 ). Mke sure tht the thred psses through the groove in the thred guide. Memo Look in the upper groove re to check if the thred ctches on the tke-up lever visile inside the upper groove re. l Groove in thred guide Pull the thred up through the thred cutter to cut the thred, s shown in the illustrtion. Thred cutter i Look in the upper groove re Pss the thred through the needle r thred guide (mrked 6 ) y holding the thred with oth hnds nd guiding it s shown in the illustrtion. When using thred tht quickly winds off the spool, such s metllic thred, it my e difficult to thred the needle if the thred is cut. Therefore, insted of using the thred cutter, pull out out 80 mm (pprox. 3 inches) of thred fter pssing it through the thred guide disks (mrked 7 ). Needle r thred guide j Press the Presser Foot Lifter utton to lower presser foot. 80 mm (pprox. 3 inches) or more B-40

43 m Press the Automtic Threding utton to hve the mchine utomticlly thred the needle. UPPER THREADING Memo If the needle could not e threded or the thred ws not pssed through the needle r thred guides, perform the procedure gin strting from step c. Then, pss the thred through the eye of the needle fter step i. B 1 The thred psses through the eye of the needle. Memo When the Automtic Threding utton is pressed, the presser foot will e utomticlly lowered. After threding is finished, the presser foot moves ck to the position efore the Automtic Threding utton ws pressed. Some needles cnnot e threded with the needle threder. In this cse, insted of using the needle threder fter pssing the thred through the needle r thred guide (mrked 6 ), mnully pss the thred through the eye of the needle from the front to the ck. Getting Redy n Crefully pull the end of the thred tht ws pssed through the eye of the needle. * If loop ws formed in the thred pssed through the eye of the needle, crefully pull on the loop of thred through to the ck of the needle. Pulling Up the Boin Thred There my e some pplictions where you wnt to pull up the oin thred; for exmple, when emroidering oin work designs. o Pulling the loop of thred gently will void needle rekge. Pull out out cm (pprox. 4-6 inches) of the thred, nd then pss it under the presser foot towrd the rer of the mchine. Rise the presser foot lever if the presser foot is lowered. Memo You cn pull up the oin thred fter threding the upper thred ( UPPER THREADING on pge B-38). Guide the oin thred through the groove, following the rrow in the illustrtion. * Do not cut the thred with the cutter. * Do not replce the oin cover. Aout cm (pprox. 4-6 inches) Bsic opertions B-41

44 UPPER THREADING c While holding the upper thred, press the Needle Position utton to lower the needle. Needle Position utton Press the Needle Position utton to rise the needle. Using Threds tht Unwind Quickly Using the Spool Net If using trnsprent nylon monofilment thred, metllic thred, or other strong thred, plce the included spool net over the spool efore using it. When using specilty threds, threding must e done mnully. If the spool net is too long, fold it once to mtch it to the spool size efore plcing it over the spool. Spool net Thred spool c Spool pin d Spool cp d Gently pull the upper thred. A loop of the oin thred will come out of the hole in the needle plte. Memo When threding the spool with the spool net on, mke sure tht 5 cm - 6 cm (pprox. 2 inches - 2-1/2 inches) of thred re pulled out. It my e necessry to djust the thred tension when using the spool net. e Pull up the oin thred, pss it under the presser foot nd pull it out 100 mm (pprox. 4 inches) towrd the ck of the mchine, mking it even with the upper thred. Upper thred Boin thred f Replce the oin cover. B-42

45 BEFORE EMBROIDERING BEFORE EMBROIDERING Emroidery Step y Step Follow the steps elow to prepre the mchine for emroidery. B 1 Step 9 Getting Redy Step 4, 5 Step 3, 8 Step 6 Step 1 Step 7 Step 2 Step # Aim Action Pge 1 Boin thred setup For the oin thred, wind emroidery oin thred nd set it in plce. B-31 2 Fric preprtion Attch stilizer mteril to the fric, nd hoop it in the emroidery frme. E-11 to E-17 3 Pttern selection Turn the min power to ON, nd select n emroidery pttern. E-3 4 Checking the needle Use needle 75/11 for most emroidering. B-50 5 Emroidery foot ttching Attch emroidery foot W+ with LED pointer. B-46 6 Emroidery unit ttching Attch the emroidery unit. B-44 7 Emroidery frme ttchment Attch the emroidery frme to the emroidery unit. E-17 8 Checking the lyout Check nd djust the size nd position of the emroidery. E-19 9 Emroidery thred setup Set up emroidery thred ccording to the pttern. E-21 * It is recommended tht 90/14 needle should e used when emroidering on hevy weight frics or stilizing products (for exmple; denim, puffy fom, etc.). Bsic opertions B-43

46 BEFORE EMBROIDERING Aout the Emroidery Unit Attching the Emroidery Unit CAUTION Do not move the mchine with the emroidery unit ttched. The emroidery unit could fll off nd cuse injury. Keep your hnds nd foreign ojects wy from the emroidery crrige nd frme when the mchine is emroidering. Otherwise, injury my result. To void distorting your emroidery design, do not touch the emroidery crrige nd frme when the mchine is emroidering. Be sure there is no gp etween the emroidery unit nd the mchine. If there is gp, the emroidery ptterns will not emroider with the correct registrtion. Do not push on the crrige when instlling the emroidery unit onto the mchine. Moving the crrige my dmge the emroidery unit. Turn the min power to ON. c The following messge will pper. d Press. Be sure to turn off the power efore instlling the emroidery unit. Otherwise, the mchine my e dmged. Do not touch the inner connector of the emroidery unit. The pins on the emroidery unit connection my e dmged. Do not pply strong force to the emroidery unit crrige or pick up the unit y the crrige. Otherwise, the emroidery unit my e dmged. When not using or when trnsporting the emroidery unit, pck it securely in the shipping crton ox. Turn the min power to OFF. Insert the emroidery unit connection into the mchine connection port. The spring hinge on the connection port cover will llow esy ccess to the port. Push lightly on the connection port cover until the unit clicks into plce. The crrige will move to the initiliztion position. Removing the Emroidery Unit Either Emroidery screen or Emroidery Edit screen ppers, depending on the setting selected in the settings screen. Press either (Emroidery) or (Emroidery Edit), then press. The crrige will move to the removl position. Emroidery unit connection Mchine connection port CAUTION Alwys remove the emroidery frme efore pressing. Otherwise, the frme my strike the emroidery foot, nd possily cuse injury. The emroidery unit will not fit in the shipping crton ox if this step is not done. B-44

47 BEFORE EMBROIDERING c The wrning messge The crrige of the emroidery unit will move. Keep your hnds etc. wy from the crrige. ppers. Press nd turn the min power OFF. Be sure to turn off the mchine efore removing the emroidery unit, otherwise dmge to the mchine my result. Hold down the relese utton, nd pull the emroidery unit wy from the mchine. B 1 Getting Redy Relese utton CAUTION Do not crry the emroidery unit y holding the relese utton comprtment. Bsic opertions B-45

48 CHANGING THE EMBROIDERY FOOT CHANGING THE EMBROIDERY FOOT The emroidery foot is ttched to the mchine when purchsed, with the connector of the emroidery foot W+ with LED pointer unplugged from the mchine. CAUTION Alwys press on the screen efore chnging the emroidery foot. If is not pressed nd the Strt/Stop utton or nother utton is pressed, the mchine will strt nd my cuse injury. Only use emroidery feet mde for this mchine. Using other presser feet my led to ccident or injury. Removing the Emroidery Foot Press the Needle Position utton to rise the needle. e Use the included screwdriver to loosen the screw of the emroidery foot, then remove the emroidery foot. Press. * If the messge OK to utomticlly lower the presser foot? ppers on the LCD screen, press OK to continue. The entire screen ecomes white, nd ll keys nd opertion uttons re locked. Rise the presser foot lever. c d Unplug the connector of the emroidery foot W+ from the jck on the ck of the mchine. Screwdriver Emroidery foot c Emroidery foot screw Remove the emroidery foot. Attching the Emroidery Foot CAUTION Mke sure tht the emroidery foot is instlled in the correct direction, otherwise the needle my strike the emroidery foot, reking the needle nd cusing injuries. Position the emroidery foot W+ with LED pointer on the presser foot r y ligning the notch of the presser foot to the lrge screw. Side view B-46

49 CHANGING THE EMBROIDERY FOOT Hold the emroidery foot in plce with your right hnd, nd then use the included screwdriver to securely tighten the emroidery foot screw. Checking the Needle Drop Point With the Emroidery Foot W+ with LED Pointer Before eginning to emroider when using the emroidery foot W+ with LED pointer, crefully red the procedures descried in the Emroidery nd Emroidery Edit chpters. Press in the emroidery screen. The LED pointer indictes the needle drop point. B 1 Getting Redy c CAUTION Use the included screwdriver to firmly tighten the screw of the emroidery foot. If the screw is loose, the needle my strike the emroidery foot nd possily cuse injury. Plug the connector of the emroidery foot W+ with LED pointer into the jck on the ck of your mchine. d Press uttons. to unlock ll keys nd All keys nd opertion uttons re unlocked, nd the previous screen is displyed. Memo When the LED pointer is turned on, the presser foot height is utomticlly djusted ccording to the fric thickness. If is pressed gin, the fric thickness is remesured nd the presser foot is set to the optimum height. * The LED pointer turns off utomticlly y lowering the presser foot or returning to the previous pge. With ulky frics, the position my not e ccurte due to the vrious depths of the frics. In this cse, mnully djust the position ccording to the thickness of the fric. With fric tht hs very uneven surfce such s quilting, the fric thickness my not e correctly mesured. In this cse, the pointer indiction should e used only s reference. Bsic opertions B-47

50 CHANGING THE EMBROIDERY FOOT Adjusting the LED Pointer Adjust the LED pointer if it indictes point different thn the ctul needle drop point. Before djusting the LED pointer, mrk the ctul needle drop point on the fric to e emroidered, nd then hoop the fric nd ttch the emroidery frme. Press. The settings screen ppers. Disply pge 7 of the Emroidery settings screen. d Use or to djust the LED pointer so tht it indictes the ctul needle drop point. e Press screen. twice to return to the originl Adjusting the Brightness of the LED Pointer Follow the steps from to d to disply the emroidery foot with LED pointer djustment screen. Use or to djust the rightness of the LED pointer. c Press screen. twice to return to the originl c Press. The Emroidery Foot W+ with LED Pointer Adjustment screen ppers. LED pointer djustment The specified setting is sved in the mchine s memory. This is useful for positioning during continuous emroidering. For norml use, return the setting to 00. B-48

51 CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION Alwys press on the screen efore chnging the needle. If is not pressed nd the Strt/Stop utton or nother opertion utton is pressed ccidentlly, the mchine will strt nd injury my result. Use only emroidery mchine needles mde for home use. Other needles my end or rek nd my cuse injury. Never sew with ent needle. A ent needle will esily rek nd my cuse injury. Memo To check the needle correctly, plce the flt side of the needle on flt surfce. Check the needle from the top nd the sides. Throw wy ny ent needles. c d Use the screwdriver to turn the screw towrd the front of the mchine nd loosen the screw. Remove the needle. With the flt side of the needle fcing the ck, insert the new needle ll the wy to the top of the needle stopper (viewing window) in the needle clmp. Use screwdriver to securely tighten the needle clmp screw. B 1 Getting Redy Prllel spce Level surfce (oin cover, glss, etc.) Press the Needle Position utton to rise the needle. Press. * If the messge OK to utomticlly lower the presser foot? ppers on the LCD screen, press OK to continue. The entire screen ecomes white, nd ll keys nd opertion uttons re locked. Before replcing the needle, cover the hole in the needle plte with fric or pper to prevent the needle from flling into the mchine. Needle stopper Hole for setting the needle c Flt side of needle CAUTION Be sure to push in the needle until it touches the stopper, nd securely tighten the needle clmp screw with screwdriver. If the needle is not completely inserted or the needle clmp screw is loose, the needle my rek or the mchine my e dmged. e Press uttons. to unlock ll keys nd Bsic opertions B-49

52 USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Aout the Needle The needle is proly the most importnt prt of the mchine. Choosing the proper needle for your emroidering project will result in eutiful finish nd fewer prolems. Below re some things to keep in mind out needles. Use needle 75/11 for emroidery. It is recommended tht 90/14 needle should e used when emroidering on hevyweight frics or stilizing products (for exmple, denim, puffy fom, etc.). A 75/11 needle my end or rek, which could result in injury. The smller the needle numer, the finer the needles. As the numers increse, the needles get thicker. Use fine (thinner) needles for lightweight frics, nd thicker (lrger) needles for hevyweight frics. USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Using USB Medi or Emroidery Crd Reder/USB Crd Writer Module* * If you hve purchsed the Plette Ver5 or lter, Plette Petite or Plette PTS, you cn plug the included USB crd writer module into the mchine s n emroidery crd reder, nd recll ptterns. Use only n emroidery crd reder designed for this mchine. Using n unuthorized emroidery crd reder my cuse your mchine to operte incorrectly. Emroidery ptterns cnnot e sved from the mchine to n emroidery crd inserted into connected USB crd writer module. Memo USB medi is widely used, however some USB medi my not e usle with this mchine. Plese visit our wesite for more detils. Depending on the type of USB medi eing used, either directly plug the USB device into the mchine s USB port or plug the USB medi Reder/Writer into the mchine s USB port. USB port for mouse / medi (USB 2.0) USB medi USB port for mouse / medi Emroidery crd Reder/USB crd writer module* B-50

53 USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Connecting the Mchine to the Computer Using the included USB cle, the mchine cn e connected to your computer. Using USB Mouse The USB mouse, connected to the mchine, cn e used to perform vriety of opertions in the screens. B 1 If mouse other thn the optionl USB mouse is used, it my not perform s descried in this Instruction nd Reference Guide. Getting Redy USB port for computer USB cle connector The connectors on the USB cle cn only e inserted into port in one direction. If it is difficult to insert the connector, do not insert it with force. Check the orienttion of the connector. For detils on the position of the USB port on the computer (or USB hu), refer to the instruction mnul for the corresponding equipment. USB port for mouse / medi USB mouse Do not perform opertions with the mouse t the sme time tht you re touching the screen with your finger or the included touch pen. A USB mouse cn e connected or disconnected t ny time. The mouse pointer does not pper in the opening screen. Clicking Key When the mouse is connected, the pointer ppers on the screen. Move the mouse to position the pointer over the desired key, nd then click the left mouse utton. Memo Doule-clicking hs no effect. Pointer Bsic opertions B-51

54 USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Chnging Pges Rotte the mouse wheel to switch through the ts of the pttern selection screens. Memo If pge numers nd verticl scroll r for dditionl pges re displyed, rotte the mouse wheel or click the left mouse utton with the pointer on / or / to disply the previous or next pge. B-52

55 USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE B 1 Getting Redy Bsic opertions B-53

56 BBsic opertions Chpter 2 Sensor Functions CONNECTING THE SENSOR PEN...55 Using the Sensor Pen Holder...55 USING THE SENSOR PEN...57 Using the Sensor Pen...57 Importnt Informtion out Sensor Pen...57 Clirting the Sensor Pen...58 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE...60 Specifying the Emroidering Position With the Sensor Pen...60 Selecting the Emroidering Position y the Pttern Edge Selecting the Emroidering Position y the Pttern Center Sensor functions nd the sensor pen my not e ville in some countries or regions.

57 CONNECTING THE SENSOR PEN CONNECTING THE SENSOR PEN When connecting the sensor pen to the mchine, mke sure tht the rrow on the sensor pen connector fces up, lines up with the rrow on the mchine, nd tht the connector is firmly inserted into the jck. Insert the point end of the clening rush or the sem ripper point into the hole in the protective cp on the right side of the mchine. Lightly pull out the protective cp to remove it. Insert the point of the sem ripper or clening rush into the hole in the protective cp, nd then lightly pull out the protective cp to remove it. B 2 Sensor Functions Sensor pen jck Sensor pen connector CAUTION When connecting the sensor pen, mke sure tht the rrow on the sensor pen connector fces up nd ligns with the rrow on the mchine, otherwise the connector pins will not lign correctly nd the connector will e dmged. When connecting or disconnecting the sensor pen, gr the connector, nd then slowly push it stright in or pull it stright out. When disconnecting the sensor pen from the mchine, do not pull on the cord, otherwise the sensor pen my e dmged. Firmly insert the sensor pen holder into the hole where the protective cp ws removed. Using the Sensor Pen Holder Before connecting the sensor pen to the mchine, ttch the sensor pen holder to keep the sensor pen with the mchine. The right side of the holder cn e used to hold the touch pen. Sensor pen holder Bsic opertions B-55

58 CONNECTING THE SENSOR PEN c Set the sensor pen in the sensor pen holder with the pen tip pointing downwrd, nd then connect the sensor pen to the mchine. B-56

59 USING THE SENSOR PEN USING THE SENSOR PEN Using the Sensor Pen Hold the sensor pen, nd then touch the point to e specified. When the tip of the sensor pen is pushed in, the position informtion is sent to the mchine. When using the sensor pen, touch slowly nd gently for the definite opertion. Importnt Informtion out Sensor Pen The sensor pen emits the signl to the mchine, nd then the sensor pen receiver receives the signl to specify the position. B 2 Sensor Functions 1) Touch: Touch point with the sensor pen, then immeditely lift up the pen. 2) Long touch: Touch point with the sensor pen nd hold it down for t lest one second to ctivte the functions tht you just selected. Once point is touched with the sensor pen nd the entered informtion is pplied in the screen, perform the next opertion. Repetedly touching point with the sensor pen my prevent the informtion from eing correctly red. Do not drg the sensor pen tip on the mchine, otherwise the sensor pen tip my e chipped off. If there is ny prolem with the guideline mrker, the sensor function my not operte correctly. Sensor pen receiver inside the mchine Signl is wved out from the sensor pen CAUTION Do not insert ny oject into the sensor pen nd the receiver, otherwise the mchine my e dmged. IMPORTANT Do not put your hnd, the fric or ny oject etween the mchine nd the sensor pen, otherwise the sensor pen receiver my not receive the ultrsonic wve. Do not use the mchine close to ny other unit which produces ultrsonic wve or virtion sound, otherwise interference my occur. Memo The sensor pen cn e used to touch on the screen s touch pen. Bsic opertions B-57

60 USING THE SENSOR PEN Clirting the Sensor Pen d First touch the green dot mrking on the needle plte cover using the sensor pen. Before using the sensor pen for the first time e sure to clirte it to the screen. Doing so llows the mchine to lern the position you usully hold pen. Hold the sensor pen t comfortle ngle nd then clirte the mchine ccording to the procedure elow. Be sure to keep the sensor pen t the sme ngle while clirting the first nd second points. * Touch on the needle plte cover. Press. Disply pge 3 of the settings screen. Needle plte cover * A eep will sound nd the will chnge to red. (If the eep is not herd, check tht the volume setting on pge 1/7 of the settings is set t 1 or higher nd then touch gin.) * Press to redo the first point y strting over from step c. c Connect the sensor pen to the mchine nd then press. The Sensor Function Clirtion screen ppers. B-58

61 USING THE SENSOR PEN e Touch the second point t the center of the cross-hir using the sensor pen. B 2 Sensor Functions * Touch on the point in the illustrtion. Emroidery unit f Press to finish the clirtion. To repet the clirtion touch the first point gin using the sensor pen, nd continue with step e. * Press to return to the originl screen without finishing the clirtion. * Press to reset the clirtion. Bsic opertions B-59

62 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE Before using the sensor functions, crefully red the procedure in Emroidery nd Emroidery Edit to fmilirize yourself with the mchine opertions. Specifying the Emroidering Position With the Sensor Pen By using the sensor pen, the emroidering position cn e djusted to the desired loction. This function cn e performed in either Emroidery or Emroidery Edit mode, ut the procedure descried elow is performed in Emroidery mode. If the messge The crrige of the emroidery unit will move. Keep your hnds etc. wy from the crrige. ppers during the opertion, ensure sfety, nd then press. g Press. Turn on the mchine. Press (Emroidery) or (Emroidery Edit). c Select the ctegory for the pttern to e emroidered. Select the desired re nd press when the following messge ppers (only for use of the extr lrge emroidery frme). d In the pttern selection screen, press the key for the pttern to e emroidered. e Press. f Hoop the fric nd ttch the emroidery frme to the mchine. Refer to Hooping the Fric in the Emroidery Frme on pge E-13 nd ATTACHING THE EMBROIDERY FRAME on pge E-17. B-60

63 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE h Press. c With the sensor pen, touch the point on the fric corresponding to corner in the screen. B 2 The emroidering position selection screen ppers. Sensor Functions i Select the method for positioning the emroidery pttern. * To lign the edge of the emroidery with pttern or mrk on the fric, select the edge. If the center of the pttern to e emroidered is determined, select the center position. Selecting the Emroidering Position y the Pttern Edge d Squre of pttern edge Pttern position With the sensor pen, touch the point on the fric corresponding to corner in the screen. From on the screen, press the edge to e the reference for positioning. Press. Squre of pttern edge Pttern position If you don t need to djust the positions, continue to step i. e Press to djust the positions. Bsic opertions B-61

64 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE f Press to move the LED pointer (in the Emroidery Edit mode only) on the fric for djusting the first position. Selecting the Emroidering Position y the Pttern Center Press in the following screen. g Press to pply the setting. With the sensor pen, touch 2 points on the fric corresponding to the numers in the center of the emroidery pttern. h Press to move the LED pointer (in the Emroidery Edit mode only) on the fric for djusting the second position. i Press j to pply the setting. The preview in the emroidery screen is updted ccording to the specified emroidering position. Center line of the pttern Pttern position Specified point numer turns into red. If you don t need to djust the positions, continue to step g. k Press the Strt/Stop utton to strt emroidering. c Press to djust the positions. B-62

65 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE d Press to move the LED pointer (in the Emroidery Edit mode only) on the fric for djusting the first position. B 2 Sensor Functions e Press to pply the setting. f Press to move the LED pointer (in the Emroidery Edit mode only) on the fric for djusting the second position. g Press to pply the setting. h i The preview in the emroidery screen is updted ccording to the specified emroidering position. Press the Strt/Stop utton to strt emroidering. When using the sensor pen to specify the emroidering position, it my not e possile to exctly specify the desired loction. In this cse, move the emroidery frme to lign the center of the pttern with the loction indicted y the LED pointer. Bsic opertions B-63

66 USING SENSOR FUNCTIONS IN EMBROIDERY / EMBROIDERY EDIT MODE B-64

67 Emroidering This section provides instruction to emroider designs with this mchine. Pge numer strts with E in this section. Before strting emroidery work, refer to BEFORE EMBROIDERING of Bsic opertions. The screen disply nd mchine illustrtion my vry slightly, depending on the countries or regions. Chpter1 Emroidery... E-2 Chpter2 Emroidery Edit... E-56 Chpter3 How to Crete Boin Work (Emroidery)... E-86

68 EEmroidering Chpter 1 Emroidery SELECTING PATTERNS...3 Copyright Informtion... 3 Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet/Boin Work Ptterns...4 Selecting Chrcter Ptterns...5 Selecting Frme Ptterns...7 Selecting Ptterns from Emroidery Crds...7 Aout Emroidery Crd Reder (Sold Seprtely) nd USB Crd Writer Module*... 7 Aout Emroidery Crds (Sold Seprtely)... 7 Selecting Ptterns from USB Medi/Computer...8 VIEWING THE EMBROIDERING SCREEN...9 Key Functions PREPARING THE FABRIC...11 Attching Iron-on Stilizers (Bcking) to the Fric...11 Hooping the Fric in the Emroidery Frme...13 Types of Emroidery Frmes Inserting the Fric Using the Emroidery Sheet Emroidering Smll Frics or Fric Edges...16 Emroidering Smll Frics Emroidering Edges or Corners Emroidering Rions or Tpe ATTACHING THE EMBROIDERY FRAME...17 Removing the Emroidery Frme CONFIRMING THE PATTERN POSITION...19 Checking the Pttern Position...19 Previewing the Completed Pttern...20 Frme sizes displyed on screen SEWING AN EMBROIDERY PATTERN Emroidering Attrctive Finishes...21 Emroidery Needle Plte Cover Sewing Emroidery Ptterns...22 Sewing Emroidery Ptterns Which Use Appliqué...23 ADJUSTMENTS DURING THE EMBROIDERY PROCESS...26 Chnging the Thred Color Disply Chnging the Emroidery Frme Disply REVISING THE PATTERN Moving the Pttern Aligning the Pttern nd the Needle Chnging the Size of the Pttern Rotting the Pttern Creting Horizontl Mirror Imge Enlrging the Editing Screen Chnging the Density (Alphet Chrcter nd Frme Ptterns Only) Chnging the Colors of Alphet Chrcter Ptterns Emroidering Linked Chrcters Uninterrupted Emroidering (Monochrome - Using Single Color) USING THE MEMORY FUNCTION Emroidery Dt Precutions Types of Emroidery Dt tht cn e Used...44 Types of USB Devices/Medi tht cn e Used...44 Computers nd Operting Systems with the Following Specifictions cn e Used...45 Precutions on Using the Computer to Crete nd Sve Dt...45 Tjim (.dst) Emroidery Dt...45 Sving Emroidery Ptterns in the Mchine s Memory If the Memory is Full...46 Sving Emroidery Ptterns to USB Medi Sving Emroidery Ptterns in the Computer Retrieving Ptterns from the Mchine s Memory Reclling from USB Medi Reclling from the Computer EMBROIDERY APPLICATIONS Using Frme Pttern to Mke n Appliqué (1) Using Frme Pttern to Mke n Appliqué (2) Sewing Split Emroidery Ptterns If the Boin Runs Out of Thred...26 If the Thred Breks During Sewing...27 Restrting from the Beginning...28 Resuming Emroidery After Turning Off the Power...28 MAKING EMBROIDERY ADJUSTMENTS...30 Adjusting Thred Tension...30 Correct Thred Tension Upper Thred is Too Tight Upper Thred is Too Loose Adjusting the Boin Cse (with No Color on the Screw)...31 Correct Tension Boin Thred is Too Loose Boin Thred is Too Tight Using the Automtic Thred Cutting Function (END COLOR TRIM)...32 Using the Thred Trimming Function (JUMP STITCH TRIM)...32 Selecting the Length of Jump Stitch Not to Trim Adjusting the Emroidery Speed...33

69 SELECTING PATTERNS SELECTING PATTERNS Copyright Informtion The ptterns stored in the mchine nd emroidery crds re intended for privte use only. Any pulic or commercil use of copyrighted ptterns is n infringement of copyright lw nd is strictly prohiited. There re mny chrcter nd decortive emroidery ptterns stored in the mchine s memory (see the Quick Reference Guide for full summry of ptterns in the mchine s memory). You cn lso use ptterns from the emroidery crds (sold seprtely). Once the mchine hs finished the initiliztion nd the crrige hs moved to the strt position, the pttern type selection screen will disply. E 1 Emroidery If nother screen is displyed, press, then Emroidery ( or ) to disply the screen elow. There re 6 ctegories of ptterns in this mchine. c d e f g h i j By Lock Exclusives Emroidery pttern c Florl lphet ptterns d Frme ptterns e Chrcter ptterns f Boin work ptterns (see pge E-92) g Ptterns sved in the mchine s memory (see pge E-49) h Ptterns sved in USB medi (see pge E-50) i Ptterns sved on the computer (see pge E-51) j Press this key to position the emroidery unit for storge Memo A key tht ppers stcked, such s nd, indictes tht there re su-ctegories, which must e selected efore pttern selection screen ppers. Emroidering E-3

70 SELECTING PATTERNS Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet/Boin Work Ptterns c Press to crete mirror imge of the pttern s needed. * If mistke hs een mde when selecting the pttern, press the key of the pttern you wnt to emroider nd the new selection ppers. Touch the key of the ctegory of the pttern you wnt to emroider. * Refer to CREATING BOBBIN WORK on pge E-92 out the oin work ptterns. d Press. The emroidery screen is displyed. Press the key of the pttern you wnt to emroider. e Proceed to VIEWING THE EMBROIDERING SCREEN on pge E-9 to emroider the pttern. * To return to the previous screen to select nother pttern, press. * Press to view the next pge. * Press to view the previous pge. The selected pttern is displyed. E-4

71 SELECTING PATTERNS Selecting Chrcter Ptterns Exmple: Press. Entering We Fly. Press the key of the font you wnt to emroider. * If you wnt to chnge the size of chrcter, select the chrcter nd then press to chnge the size. The size chnges ech time you press the key, from lrge to medium to smll. * If you mke mistke, press to erse the mistke. * If the pttern is too smll to see clerly, you cn use the e Press key to check it. nd enter e. E 1 Emroidery c Press to chnge the selection screens. f Press to enter spce. Memo If you continue dding chrcters fter chnging the size, the new chrcters will e entered in the new size. You cnnot chnge the size of the entered chrcters fter comining chrcter stitch ptterns. d Press nd then enter W. Emroidering E-5

72 SELECTING PATTERNS g Press gin nd enter F. i Press. h Press nd then enter ly. j The emroidery screen is displyed. Proceed to VIEWING THE EMBROIDERING SCREEN on pge E-9 to emroider the pttern. * To return to the previous screen to select nother pttern, press. E-6

73 SELECTING PATTERNS Selecting Frme Ptterns Press. e Proceed to VIEWING THE EMBROIDERING SCREEN on pge E-9 to emroider the pttern. * To return to the previous screen to select nother pttern, press. E 1 Press the key of the frme shpe you wnt to emroider in the top prt of the screen. Emroidery c Frme shpes Frme ptterns Vrious frme ptterns re displyed t the ottom prt of the screen. Press the key of the frme pttern you wnt to emroider. * If you mke mistke selecting the pttern, press the key of the pttern you wnt to emroider. The selected pttern is displyed on the screen. d Press. Selecting Ptterns from Emroidery Crds Aout Emroidery Crd Reder (Sold Seprtely) nd USB Crd Writer Module* Use only n emroidery crd Reder designed for this mchine. Using n unuthorized emroidery crd Reder my cuse your mchine to operte incorrectly. * If you hve purchsed the Plette Ver5 or lter, Plette Petite or Plette PTS, you cn plug the included USB crd writer module into the mchine s n emroidery crd reder, nd recll ptterns. Emroidery ptterns cnnot e sved from the mchine to n emroidery crd inserted into connected USB crd writer module*. The emroidery screen is displyed. Aout Emroidery Crds (Sold Seprtely) Use only emroidery crds mnufctured for this mchine. Using unuthorized crds my cuse your mchine to operte incorrectly. Emroidery crds sold in foreign countries cnnot e used with this mchine. Store emroidery crds in the hrd cse. Emroidering E-7

74 SELECTING PATTERNS Plug the optionl emroidery crd Reder/USB crd writer module into the USB port on the mchine. c Press the key of the USB port. USB port Emroidery crd Reder/USB crd writer module Insert the crd completely into the crd Reder/USB crd writer module. * Insert the emroidery crd so tht the end with printed rrow is fcing up. d The ptterns on the emroidery crd re displyed on the selection screen. Follow the steps on pge E-4 to select pttern. Selecting Ptterns from USB Medi/Computer To recll ptterns from the computer or USB medi, see pges E-50 to E-51. Two emroidery USB crd Reders/USB crd writer module cnnot e used with this mchine t the sme time. If two emroidery USB crd Reders/USB crd writer module re inserted, only the emroidery USB crd Reder/USB crd writer module inserted first is detected. E-8

75 VIEWING THE EMBROIDERING SCREEN VIEWING THE EMBROIDERING SCREEN h i j k c l E 1 Emroidery d e f g m Shows the presser foot code. Attch emroidery foot W+ for most emroidery projects. When the foot presser symol is displyed on the screen, you re le to sew. Shows the oundry for emroidering with the extr lrge frme (30 cm 18 cm (pprox. 12 inches 7 inches)). c Shows preview of the selected pttern. d Shows the size of the selected pttern. e Shows the emroidery frmes tht cn e used for the selected pttern. Be sure to use the proper frme (see pge E-13). f Shows how fr the sewing position is from the center (when you move the sewing position). g Shows the degree of rottion of the pttern. h Shows how mny stitches re in the selected pttern nd how mny stitches hve een sewn so fr. i Shows the time necessry to sew the pttern, nd the time lredy spent sewing the pttern (not including time for chnging nd utomticlly trimming the thred). j Shows the numer of colors in the selected pttern, nd the numer of the color currently eing sewn. k Shows the prt of the emroidery tht will e sewn with the first thred color. l Shows the order for thred color chnges nd the emroidering time for ech thred color. m Press n rrow key to move the pttern in the direction shown y the rrow. (Press the Center key to return the pttern to the center of the emroidery re.) * The displyed time is the pproximte time tht will e required. The ctul emroidering time my e longer thn the displyed time, depending on the emroidery frme tht is used. In ddition, the mount of time required to chnge thred colors is not included. There is n explntion of dditionl key functions on the next pge. Emroidering E-9

76 VIEWING THE EMBROIDERING SCREEN Key Functions Using these keys, you cn chnge the size of the pttern, rotte the pttern, etc. Q Some opertions or functions re not ville for certin ptterns. If the key disply is light gry, you cnnot use tht function or opertion with the selected pttern. n o p q r s z y x w v u t No. Disply Key Nme Explntion Pge n Rotte key Press this key to rotte the pttern. You cn rotte pttern one degree, 10 E-38 degrees or 90 degrees t time. o Size key Press this key to chnge the size of the pttern. E-37 p Multi color key Press this key to chnge the color of ech letter when sewing lphet E-40 chrcter ptterns. q Return key Press this key to return to the pttern type selection screen. r Cut/Tension key Press this key to specify utomtic thred cutting, thred trimming or the thred tension. For emroidery, these functions re set utomticlly. E-32 to E-33 s Forwrd/Bck key Press this key to move the needle forwrd or ck in the pttern; useful if the thred reks while sewing or if you wnt to strt gin from the eginning. E-27 to E-29 t Strting point key Press this key to move the needle strt position to lign the needle with the E-36 pttern position. u Tril key Press this key to check the position of the pttern.the emroidery frme moves E-19 to the desired position so you cn check tht there is enough spce to sew the pttern. v Memory key Press this key to sve pttern in the mchine s memory, USB medi or computer. E-46 to E-48 w Uninterrupted Press this key to emroider the selected pttern with single color. E-43 emroidery key x Density key Press this key to chnge the density of lphet chrcter or frme ptterns. E-40 y Horizontl mirror imge key Press this key to crete horizontl mirror imge of the pttern. E-39 z Function pge key Press this key to show ll the keys in this screen. E-40 Q Imge key Press this key for preview of the sewn imge. E-20 E-10

77 PREPARING THE FABRIC PREPARING THE FABRIC CAUTION Use frics with thickness of less thn 3 mm (pprox. 1/8 inch). Using frics thicker thn 3 mm (pprox. 1/8 inch) my cuse the needle to rek. When using lyers with thicker tting etc., you cn sew more ttrctive emroidery y djusting the emroidery presser foot height in the emroidery settings screen (see elow). In the cse of thick terry cloth towels we recommend tht you plce piece of wter solule stilizer on the top surfce of the towel. This will help to reduce the np of the toweling nd result in more ttrctive emroidery. E 1 Emroidery Press. In the Emroidery Foot Height disply, use nd in the settings screen. Adjust the presser foot height for thick or puffy frics. To increse the spce etween the presser foot nd the needle plte, set the emroidery foot height to lrger numer, 1.5 mm setting is used for most emroidery. Attching Iron-on Stilizers (Bcking) to the Fric For est results in your emroidery projects, lwys use stilizer mteril for emroidery. Follow the pckge instructions for the stilizer eing used. When using frics tht cnnot e ironed (such s towel or frics tht hve loops which expnd when ironed) or in plces where ironing is difficult, position the stilizer mteril under the fric without fusing it, then position the fric nd stilizer in the emroidery frme, or check with your uthorized retiler for the correct stilizer to use. CAUTION Alwys use stilizer mteril for emroidery when sewing stretch frics, lightweight frics, frics with corse weve, or frics which cuse pttern shrinkge. Otherwise, the needle my rek nd cuse injury. Not using stilizer mteril my result in poor finish to your project. Use piece of stilizer which is lrger thn the emroidery frme eing used. Size of the emroidery frme Iron-on stilizer (cking) Emroidering E-11

78 PREPARING THE FABRIC Iron the iron-on stilizer mteril to the wrong side of the fric. Fusile side of stilizer Fric (wrong side) Memo When emroidering on thin frics such s orgndy or lwn, or on npped frics such s towel or corduroy, use wter solule stilizer (sold seprtely) for est results. The wter solule stilizer mteril will dissolve completely in wter, giving the project more ttrctive finish. E-12

79 PREPARING THE FABRIC Hooping the Fric in the Emroidery Frme Types of Emroidery Frmes The types nd numers of supplied emroidery frmes differ depending on the country or region. Extr Lrge Lrge E 1 Emroidery Emroidery field 300 mm 180 mm (pprox. 12 inches 7 inches) Use when emroidering connected or comined chrcters or ptterns, or when emroidering lrge ptterns. Emroidery field 180 mm 130 mm (pprox. 7 inches 5 inches) Use when emroidering ptterns etween 100 mm 100 mm (pprox. 4 inches 4 inches) nd 180 mm 130 mm (pprox. 7 inches 5 inches). Other optionl emroidery frmes cn e used. When choosing frmes tht do not pper on the screen, e sure to check the design size of the emroidery field of the optionl frme. Check with your uthorized retiler for frme comptiility. Select frme tht mtches the pttern size. Included frme options re displyed on the LCD. Highlighted: Cn e used Shded: Cnnot e used CAUTION If you use frme tht is too smll, the presser foot my strike the frme during sewing nd cuse injury. Emroidering E-13

80 PREPARING THE FABRIC Inserting the Fric If the fric is not securely held in the emroidery frme, the emroidery design will sew out poorly. Insert the fric on level surfce, nd gently stretch the fric tut in the frme. Follow the steps elow to insert the fric correctly. c Slightly tighten the frme djustment screw, nd then remove the slck in the fric y pulling on the edges nd corners. Do not loosen the screw. Lift-up nd loosen the frme djustment screw nd remove the inner frme. d Gently stretch the fric tut, nd tighten the frme djustment screw to keep the fric from loosening fter stretching. * After stretching the fric, mke sure the fric is tut. Frme djustment screw Inner frme Ly the fric right side up on top of the outer frme. Re-insert the inner frme mking sure to lign the inner frme s with the outer frme s. * Mke sure the inside nd outside frmes re even efore you strt emroidering. Outer frme Inner frme c Fric Inner frme s Outer frme s c Frme djustment screw Memo Stretch the fric from ll four corners nd ll four edges. While stretching the fric, tighten the frme djustment screw. E-14

81 PREPARING THE FABRIC e Return the frme djustment screw to its initil position. Plce the emroidery sheet on the inner frme. Align the guide lines on the emroidery sheet with the mrk you mde on the fric. E 1 Emroidery Memo You cn use the included screwdriver when you loosen or tighten the frme djustment screw. c Inner frme Guide line Gently stretch the fric so there re no folds or wrinkles, nd press the inner frme into the outer frme. Using the Emroidery Sheet When you wnt to emroider the pttern in prticulr plce, use the emroidery sheet with the frme. With chlk pencil, mrk the re of the fric you wnt to emroider. Inner frme Outer frme d Remove the emroidery sheet. Emroidery pttern Mrk Emroidering E-15

82 PREPARING THE FABRIC Emroidering Smll Frics or Fric Edges Use n emroidery stilizer to provide extr support. After emroidering, remove the stilizer crefully. Attch the stilizer s shown in the following exmples. We recommend using stilizer for emroidery. Emroidering Smll Frics Use temporry spry dhesive to dhere the smll piece of fric to the lrger piece in the frme. If you do not wish to use temporry spry dhesive, ttch the stilizer with sting stitch. Emroidering Rions or Tpe Secure with doule-sided tpe or temporry spry dhesive. Rion or tpe Stilizer Fric Stilizer Emroidering Edges or Corners Use temporry spry dhesive to dhere the smll piece of fric to the lrger piece in the frme. If you do not wish to use temporry spry dhesive, ttch the stilizer with sting stitch. Fric Stilizer E-16

83 ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Wind nd insert the oin efore ttching the emroidery frme. E 1 Press the Presser Foot Lifter utton to rise the presser foot. Align the emroidery frme guide with the right edge of the emroidery frme holder. d Lower the frme-securing lever to e level with the frme to secure the emroidery frme in the emroidery frme holder. Emroidery Emroidery frme holder Emroidery frme guide Slide the emroidery frme into the holder, c mking sure to lign the emroidery frme s with the holder s. Frme-securing lever CAUTION If the frme-securing lever is not lowered, the following messge ppers. You cnnot strt sewing until you lower the frme-securing lever. Arrow mrk Removing the Emroidery Frme Rise the frme-securing lever. Emroidering E-17

84 ATTACHING THE EMBROIDERY FRAME Pull the emroidery frme towrd you. E-18

85 CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION The pttern is normlly positioned in the center of the emroidery frme. If the pttern needs to e repositioned for etter plcement on the grment, you cn check the lyout efore strting emroidery. E 1 Checking the Pttern Position The emroidery frme moves nd shows the pttern position. Wtch the frme closely to mke sure the pttern will e sewn in the right plce. From, press the key for the position tht you wnt to check. Emroidery Press. The following screen is displyed. Selected position The needle will move to the selected position on the pttern. Memo To see the entire emroidering re, press. The emroidery frme moves nd shows the emroidery re. CAUTION Mke sure the needle is up when the emroidery frme is moving. If the needle is down, it could rek nd result in injury. c Press. Emroidering E-19

86 CONFIRMING THE PATTERN POSITION Previewing the Completed Pttern Press. Frme sizes displyed on screen Icon Nme Emroidering re Extr lrge emroidery frme H 300 mm W 180 mm (H 12 inches W 7 inches) Lrge emroidery frme H 180 mm W 130 mm (H 7 inches W 5 inches) Medium emroidery frme (optionl) An imge of the pttern s it will e emroidered ppers. Press used in the preview. to select the frme * Frmes displyed in light gry cnnot e selected. * Press to enlrge the imge of the pttern. * The pttern cn e sewn s it ppers in the following disply. H 100 mm W 100 mm (H 4 inches W 4 inches) Smll emroidery frme (optionl) H 20 mm W 60 mm (H 1 inch W 2-1/2 inches) Memo You cn egin sewing from this screen y pressing the Strt/Stop utton. Press to return to the originl screen. E-20

87 SEWING AN EMBROIDERY PATTERN SEWING AN EMBROIDERY PATTERN Emroidering Attrctive Finishes There re mny fctors tht go into eutiful emroidery. Using the pproprite stilizer (see pge E-11) nd hooping the fric in the frme (see pge E-13) re two importnt fctors mentioned erlier. Another importnt point is the ppropriteness of the needle nd thred eing used. See the explntion of threds elow. Thred Upper thred Use emroidery thred intended for use with this mchine. Other emroidery threds my not yield optimum results. Boin thred Use emroidery oin thred intended for use with this mchine. E 1 Emroidery Memo If you use threds other thn those listed ove, the emroidery my not sew out correctly. Included oin cse vries depending on the model of mchine. See explntion elow to understnd the different oin cses. Boin cse (recommended for sewing nd for emroidering with included 60 weight oin thred) Stndrd oin cse originlly instlled in the mchine hs green mrking on the screw. We recommend using the included emroidery oin thred with this oin cse. Do not djust the tension screw on this oin cse with the green mrked screw. Stndrd oin cse (green mrking on the screw) Boin cse (for prewound or other emroidery oin threds) The oin cse with no color on the screw is set with tighter tension for emroidery with different weights of oin threds nd vriety of emroidery techniques. This oin cse is identified with drk colored mrk on the inside of the oin cvity. The tension screw on this cse cn e djusted if necessry (see pge E-31). Boin cse (no color on the screw) See Clening the Rce of Appendix for how to remove the oin cse. CAUTION When emroidering on lrge grments (especilly jckets or other hevy frics), do not let the fric hng over the tle. Otherwise, the emroidery unit cnnot move freely nd the emroidery frme my strike the needle, cusing the needle to end or rek nd possily cuse injury. Plce the fric so tht it does not hng off the tle or hold the fric to keep it from drgging. Before emroidering, check tht there is enough thred in the oin. If you strt to sew your emroidery project without enough thred in the oin, you will need to rewind the oin in the middle of the emroidery pttern. Do not leve ojects in the rnge of motion of the emroidery frme. The frme my strike the oject nd cuse poor finish to the emroidery pttern. When emroidering on lrge grments (especilly jckets or other hevy frics), do not let the fric hng over the tle. Otherwise, the emroidery unit cnnot move freely, nd the pttern my not turn out s plnned. Emroidering E-21

88 SEWING AN EMBROIDERY PATTERN Emroidery Needle Plte Cover Under some conditions, sed on the type of fric, stilizer, or thred eing used, there my e some looping in the upper thred. In this cse, ttch the included emroidery needle plte cover to the needle plte. Attch the cover y inserting the two projections on the underside of the cover into the notches on the needle plte s shown elow. Sewing Emroidery Ptterns Exmple: Groove Projection c Notch To remove the emroidery needle plte cover, plce your fingernil in the groove nd lift the plte out. CAUTION Push the emroidery needle plte cover s fr s possile to ttch it. If the emroidery needle plte cover is not securely ttched, it my cuse the needle to rek. Do not use the emroidery needle plte cover for ny pplictions other thn emroidery. Emroidery color order Cursor Memo The [+] cursor moves over the pttern, showing which prt of the pttern is eing sewn. Thred the mchine with thred for the first color, pss the thred through the hole in emroidery foot, pull out some thred to give it some slck, nd then lightly hold the end of the thred in your left hnd. E-22

89 SEWING AN EMBROIDERY PATTERN c Lower the presser foot, then press the Strt/Stop utton to strt emroidering. After 5-6 stitches, press the Strt/Stop utton gin to stop the mchine. Trim the excess thred t the end of the sem. If the end of the sem is under the presser foot, rise the presser foot, then trim the excess thred. f Repet the sme steps for emroidering the remining colors. E 1 Emroidery d e Press the Strt/Stop utton to strt emroidering. When the first color is completely sewn, the mchine will utomticlly trim the threds nd stop. The presser foot will then utomticlly e rised. On the emroidery color order disply, the next color will move to the top. Memo If there is thred left over from the eginning of sewing, it my e sewn over s you continue emroidering the pttern, mking it very difficult to del with the thred fter the pttern is finished. Trim the threds t the eginning of ech thred chnge. Remove the thred for the first color from the mchine. Thred the mchine with the next color. When the lst color is sewn, Finished sewing will pper on the disply. Press, nd the disply will return to the originl screen. Memo The Thred Trimming Function is originlly set to trim excess thred jumps (threds linking prts of the pttern, etc.). Depending on the type of thred nd fric tht re used, n end of upper thred my remin on the surfce of the fric t the eginning of the stitching. After emroidering is finished, cut off this excess thred. If the setting hs een turned off, trim the excess thred jumps using scissors fter the pttern is finished. See pge E-32 for informtion on the thred trimming function. Sewing Emroidery Ptterns Which Use Appliqué There re some ptterns which cll for n ppliqué inside the pttern. Prepre the se fric nd the ppliqué fric (ppliqué piece). When sewing n emroidery pttern with n ppliqué, the color sewing order disply shows APPLIQUE MATERIAL, APPLIQUE POSITION, APPLIQUE, nd then the sewing order of the colors round the ppliqué. Memo Depending on the thred color disply setting, the disply my show,, or. Emroidering E-23

90 SEWING AN EMBROIDERY PATTERN Attch n iron-on stilizer to the wrong side of the ppliqué mteril. d Plce the se mteril into the emroidery frme. Appliqué mteril (cotton, felt, etc.) Iron-on stilizer Plce the ppliqué mteril into the emroidery frme, nd then press the Strt/Stop utton to sew the outline of the ppliqué. e Bse mteril Press the Strt/Stop utton to sew the position of the ppliqué. * Use the sme thred color you pln to use when ttching the ppliqué in step g. Outline of ppliqué Appliqué mteril Memo The emroidery procedure is the sme s the sic procedure explined on pge E-22. The mchine will sew round the outline of the ppliqué pieces nd will then stop. f Position of ppliqué Bse mteril The mchine will sew round the position of the ppliqué nd will then stop. Apply thin lyer of dhesive or spry dhesive to the ck of the ppliqué piece nd ttch it to the ppliqué position so tht it follows the sem of the outline. c Remove the ppliqué mteril from the emroidery frme, nd then cut crefully long the stitching. After cutting, remove ll of the stitching thred crefully. * Crefully cut out the pttern on the outline you just sewed. Do not cut inside the stitching line, s the ppliqué fric will not e cught y the ppliqué stitch. Memo If the ppliqué mteril is lightweight fric, you my wnt to use fusile we on the ck to stilize the fric nd for ppliqué plcement. Fuse ppliqué in plce with n iron. Do not remove fric from the frme to iron the ppliqué mteril. E-24

91 SEWING AN EMBROIDERY PATTERN Press the Strt/Stop utton. g E 1 Memo Some ptterns my not show ll three ppliqué steps. Sometimes the APPLIQUE step will e shown s color. Emroidery h The ppliqué will then e completed. Chnge the upper thred nd then crry out the rest of the emroidering. Memo Some glue my get onto the presser foot, needle, nd needle plte t this time. Finish emroidering the ppliqué pttern nd then clen wy the glue. For est sewing results clip ll threds etween color steps. Emroidering E-25

92 ADJUSTMENTS DURING THE EMBROIDERY PROCESS ADJUSTMENTS DURING THE EMBROIDERY PROCESS Be creful not to ump the emroidery unit crrige or the presser foot when removing or ttching the emroidery frme. Otherwise, the pttern will not emroider correctly. If the Boin Runs Out of Thred When the oin egins to run out of thred during emroidering, the mchine will stop nd the messge elow will pper. Press nd follow the directions elow to rethred the lower threding. If very little sewing remins, you cn emroider 10 finl stitches without rethreding the mchine y pressing. The mchine will stop fter sewing the 10 stitches. Unlock the frme-securing lever nd remove the emroidery frme. * Be creful not to pply strong force to the fric t this time. Otherwise, the fric my loosen in the frme. c Insert wound oin into the mchine (see Setting the Boin of Bsic opertions ). If Upper nd Boin Thred Sensor in the settings screen of the mchine setting mode is set to OFF, the messge shown ove does not pper. Press. d Press. After the thred is utomticlly cut, the crrige will move. The crrige will return to its originl position. e Attch the emroidery frme. f To return to the spot in the pttern where you stopped sewing, follow steps c through f in the next section. E-26

93 ADJUSTMENTS DURING THE EMBROIDERY PROCESS If the Thred Breks During Sewing Press the Strt/Stop utton to stop the mchine. If the upper thred is roken, redo the upper threding. If the oin thred is roken, press nd follow the directions in steps through e from the previous section to reset the oin. Press,,, or to move d the needle ck the correct numer of stitches efore the spot where the thred roke. * If you cnnot move ck to the spot where the thred roke, press to select the color nd move to the eginning position of tht color, then use,,, or to move hed to slightly efore where the thred roke. E 1 Emroidery c Press. e Press to return to the originl screen. f Press the Presser Foot Lifter utton to lower the presser foot, nd press the Strt/Stop utton to continue sewing. Emroidering E-27

94 ADJUSTMENTS DURING THE EMBROIDERY PROCESS Restrting from the Beginning Press. Resuming Emroidery After Turning Off the Power The current color nd stitch numer re sved when emroidery is stopped. The next time the mchine is turned on, you hve the option to continue or delete the pttern. Memo Even if the power goes out in the middle of emroidery, the mchine returns to the point where emroidery ws stopped when the mchine is turned on gin. Press. Current stitch numer when emroidery ws stopped Do not remove the emroidery unit or the memory will no longer rememer your design. Turn the min power to ON. c The emroidery frme moves, returning the needle to the pttern s eginning position. Press the Presser Foot Lifter utton to lower the presser foot nd strt sewing. Follow the instructions shown on the screen nd remove the emroidery frme. The following messge will pper. E-28

95 ADJUSTMENTS DURING THE EMBROIDERY PROCESS c Attch the emroidery frme nd press. E 1 Emroidery The previous emroidery screen displyed efore the mchine ws turned off ppers. Memo If you wnt to strt new emroidery pttern, press so the pttern selection screen ppers. d Continue emroidering. Stitch numer when emroidery is resumed Emroidering E-29

96 MAKING EMBROIDERY ADJUSTMENTS MAKING EMBROIDERY ADJUSTMENTS Adjusting Thred Tension Press. When emroidering, the thred tension should e set so tht the upper thred cn slightly e seen on the wrong side of the fric. Correct Thred Tension The pttern cn e seen from the wrong side of the fric. If the thred tension is not set correctly, the pttern will not finish well. The fric my pucker or the thred my rek. Right side Wrong side Follow the opertions descried elow to djust thred tension ccording to the sitution. If the thred tension setting is mde extremely wek, the mchine my stop during sewing. This is not the sign of mlfunction. Increse the thred tension slightly, nd egin sewing gin. Press to weken the upper thred tension. (The tension numer will decrese.) Memo If you turn the min power to OFF or select different pttern, the thred tension will reset to the utomtic setting. When you retrieve sved pttern, the thred tension setting will e the sme s when the pttern ws sved. Upper Thred is Too Tight The tension of the upper thred is too tight, resulting in the oin thred eing visile from the right side of the fric. If the oin thred ws incorrectly threded, the upper thred my e too tight. In this cse, refer to Setting the Boin of Bsic opertions nd rethred the oin thred. c Press. Upper Thred is Too Loose The tension of the upper thred is too loose, resulting in loose upper thred, loose thred locks, or loops ppering on the right side of the fric. If the upper thred ws incorrectly threded, the upper thred my e too loose. In this cse, refer to Upper Threding of Bsic opertions nd rethred the upper thred. Right side Wrong side Right side Wrong side Press. E-30

97 Press to tighten the upper thred tension. (The tension numer will increse.) MAKING EMBROIDERY ADJUSTMENTS To djust the oin tension for emroidery function, using the oin cse (with no color on the screw), turn the slotted-hed screw (-) with (smll) screwdriver. E 1 c Press. With Emroidery Tension on the setting screen, the tension of the upper thred cn e djusted for emroidering. The selected setting will e pplied to ll ptterns. When emroidering, if the overll tension of the upper thred is too tight or too loose, djust it from the setting screen. Press to tighten the upper thred tension nd press to loosen the upper tension. If n individul emroidery pttern needs dditionl fine tuning, refer to Adjusting Thred Tension on pge E-30. Do not turn phillips screw (+). Adjust with screwdriver (smll). Correct Tension Upper thred slightly ppers on the wrong side of fric. Right side Wrong side Boin Thred is Too Loose Boin thred ppers slightly on the right side of fric. Emroidery Right side Wrong side If this occurs, turn the slotted-hed screw (-) clockwise, eing creful not to over-tighten the screw, pproximtely degrees to increse oin tension. Adjusting the Boin Cse (with No Color on the Screw) The oin cse (with no color on the screw) cn e djusted when oin tension chnges re required to ccommodte different oin threds. See Emroidering Attrctive Finishes on pge E-21. Emroidering E-31

98 MAKING EMBROIDERY ADJUSTMENTS Boin Thred is Too Tight Upper thred on the right side of fric seems to e lifting/looping nd oin thred is not seen on the wrong side of fric. Press. Right side Wrong side If this occurs, turn the slotted-hed screw (-) counterclockwise, eing creful not to over-loosen the screw, pproximtely degrees to decrese oin tension. CAUTION When djusting the oin cse, e sure to remove the oin from the oin cse. DO NOT djust the position of the phillips (+) screw on the oin cse s this my result in dmge to the oin cse, rendering it unusle. If the slotted-hed screw (-) is difficult to turn, do not use force. Turning the screw too much or providing force in either (rottionl) direction my cuse dmge to the oin cse. Should dmge occur, the oin cse my not mintin proper tension. Using the Automtic Thred Cutting Function (END COLOR TRIM) The utomtic thred cutting function will cut the thred t the end of sewing ech color. This function is initilly turned on. To turn this function off, press key nd then. This function cn e turned on or off during emroidering. Press to turn off the utomtic thred cutting function. The key will disply s * When one color thred is sewn, the mchine will stop without cutting the thred. Using the Thred Trimming Function (JUMP STITCH TRIM) The thred trimming function will utomticlly trim ny excess thred jumps within the color. This function is initilly turned on. To turn this function off, press key nd then. This function cn e turned on or off during emroidering. * Your customized setting remins fter turning the mchine off nd on. * This setting returns to its defult when the mchine is turned off. Jump stitch E-32

99 MAKING EMBROIDERY ADJUSTMENTS When this function is turned on, use the included ll point needle 75/11 for emroidering ptterns with short jump stitches such s lphet chrcters. Using other needles my cuse the thred to rek. Press. Selecting the Length of Jump Stitch Not to Trim When the thred trimming function is turned on, you cn select the length of the jump stitch not to trim the thred. This function cn e turned on or off during emroidering. Select setting from 5 mm to 50 mm in 5 mm increments. * Your customized setting remins fter turning the mchine off nd on. Press or to select the length of jump stitch. E 1 Emroidery For exmple: Press to select 25 mm (1 inch) nd the mchine will not trim jump stitch of 25 mm or less efore moving to the next stitching. Press function. to turn off the thred trimming If design hs mny trims it is recommended to select higher jump stitch trim setting in order to reduce the mount of excess tils on ckside of fric. The higher numer of the jump stitch length selected, the fewer numer of times the mchine will trim. In this cse, more jump stitches remin on the surfce of the fric. Adjusting the Emroidery Speed Press. The key will disply s * The mchine will not trim the thred efore moving to the next stitching. In the Mx Emroidery Speed disply, use to chnge the mximum emroidery speed. * You cn choose from 3 different speed levels, 350 spm, 600 spm or 1050 spm. Emroidering E-33

100 MAKING EMBROIDERY ADJUSTMENTS Memo spm is the numer of stitches sewn in one minute. Decrese the sewing speed when emroidering on thin, thick, or hevy frics. The sewing speed cn e chnged fter n emroidery hs een strted. The mximum sewing speed setting does not chnge until new setting is selected. The setting specified efore the min power is set to OFF remins selected the next time tht the mchine is turned on. Decrese the sewing speed to 600 spm when using specility thred like metllic thred. While selecting the oin work pttern, the emroidery speed recommendtion is set t 100 spm ; however you cn choose from 100 spm, 200 spm, or 350 spm. When the thred numer #123 c is displyed, use to select from six emroidery thred rnds pictured elow. MADEIRA /POLYESTER THREAD# c Press. Chnging the Thred Color Disply You cn disply the nme of the thred colors or emroidery thred numer. MADEIRA RAYON THREAD# SULKY THREAD# Memo Colors on the screen my vry slightly from ctul spool colors. ROBISON-ANTON/POLYESTER THREAD# Press. EMBROIDERY / POLYESTER THREAD# In the Thred Color Disply, use to disply the nme of the thred colors or the emroidery thred numer. COUNTRY/COTTON THREAD#* * Depending on the country or re, cotton-like polyester thred is sold. d Press. E-34

101 MAKING EMBROIDERY ADJUSTMENTS Chnging the Emroidery Frme Disply Press. E 1 In the Emroidery Frme Disply, use to chnge the emroidery frme disply mode. * There re 16 choices. Emroidery * Optionl emroidery frmes Extr lrge frme emroidering re 30 cm 18 cm (12 inches 7 inches) Center mrk c Lrge frme emroidering re 18 cm 13 cm (7 inches 5 inches) d Emroidering re for optionl order emroidery frme 18 cm 10 cm (7 inches 4 inches) e Emroidery re for optionl quilt emroidery frme 15 cm 15 cm (6 inches 6 inches) f Medium frme emroidering re 10 cm 10 cm (4 inches 4 inches) g Emroidery re for optionl smll emroidery frme 2 cm 6 cm (1 inch 2-1/2 inches) h Emroidery re for optionl order emroidery frme 30 cm 10 cm (12 inches 4 inches) i Grid lines c Press. Emroidering E-35

102 REVISING THE PATTERN REVISING THE PATTERN CAUTION When you hve revised the pttern, check the disply of ville emroidery frmes nd use n pproprite frme. If you use n emroidery frme not displyed s ville for use, the presser foot my strike the frme nd possily cuse injury. Moving the Pttern Use to move the pttern in the direction shown y the rrow. Press to center the pttern. Aligning the Pttern nd the Needle Distnce from the center The pttern cn lso e moved y drgging it. If USB mouse is connected, move the mouse to position the pointer on the desired pttern, nd then select nd drg the pttern. The pttern cn lso e drgged y selecting it directly in the screen with your finger or the touch pen. Exmple: Aligning the lower left side of pttern nd the needle Memo Ptterns cnnot e moved in screens where does not pper. E-36

103 REVISING THE PATTERN Mrk the emroidery strt position on the fric, s shown. d Press. e Use to lign the needle nd the mrk on the fric, nd egin emroidering the pttern. E 1 Emroidery Press. Chnging the Size of the Pttern Press. c Press. Strt position This key is used for ligning linked chrcters (see pge E-41). The needle position moves to the ottom left corner of the pttern (the emroidery frme moves so tht the needle is positioned correctly). Select the direction in which to chnge the size. * Press to enlrge the pttern proportiontely. * Press to shrink the pttern proportiontely. * Press to stretch the pttern horizontlly. * Press to compct the pttern horizontlly. * Press to stretch the pttern verticlly. * Press to compct the pttern verticlly. * Press to return the pttern to its originl ppernce. Emroidering E-37

104 REVISING THE PATTERN Rotting the Pttern Press. Size of the pttern Select the ngle of rottion for the pttern. c Press Memo Some ptterns or chrcters cn e enlrged more thn others. Some ptterns or chrcters cn e enlrged to greter degree if they re rotted 90 degrees. You cn chnge the size of the pttern y rotting the mouse wheel. Rotte the mouse wheel wy from you to shrink the pttern. Rotte the mouse wheel towrd you to enlrge the pttern. to return to the originl screen. * Press to rotte the pttern 90 degrees to the left. * Press to rotte the pttern 90 degrees to the right. * Press to rotte the pttern 10 degrees to the left. * Press to rotte the pttern 10 degrees to the right. * Press to rotte the pttern 1 degree to the left. * Press to rotte the pttern 1 degree to the right. * Press to return the pttern to its originl position. E-38

105 REVISING THE PATTERN Creting Horizontl Mirror Imge Press so it ppers s to crete horizontl mirror imge of the selected pttern. E 1 Press gin to return the pttern to norml. Emroidery Degree of rottion 0 Memo You cn rotte the pttern y rotting the mouse wheel. Rotte the mouse wheel wy from you to rotte the pttern 10 degrees to the left. Rotte the mouse wheel towrd you to rotte the pttern 10 degrees to the right. c Press to return to the originl screen. Enlrging the Editing Screen Enlrge the editing screen y pressing. Press to close the enlrged screen. Emroidering E-39

106 REVISING THE PATTERN Chnging the Density (Alphet Chrcter nd Frme Ptterns Only) The thred density for some lphet chrcter nd frme ptterns cn e chnged. A setting etween 80% nd 120% in 5% increments cn e specified. Press. * Press to disply ll the function keys on the screen. Norml Fine (stitches closer together) c Corse (stitches frther prt) The pttern density chnges ech time you press utton. c Press to return to the pttern selection screen. Chnging the Colors of Alphet Chrcter Ptterns Comined lphet chrcter ptterns cn e sewn with ech letter in different color. If MULTI COLOR is set, the mchine stops fter ech chrcter is sewn so tht the thred cn e chnged to different color. Press so tht it ppers s. * Press to disply ll the function keys on the screen. * Press the key gin to return to the originl setting. Chnge the density. * Press to mke the pttern less dense. * Press to mke the pttern more dense. E-40

107 REVISING THE PATTERN After chrcter is sewn, chnge the thred color, nd then sew the next chrcter. Press. E 1 Emroidery Emroidering Linked Chrcters Follow the procedure descried elow to emroider linked chrcters in single row when the entire pttern extends eyond the emroidery frme. Exmple: Linking DEF to the chrcters ABC c Press. Select the chrcter ptterns for ABC. For detils on selecting chrcter ptterns, refer to Selecting Chrcter Ptterns on pge E-5. The needle is positioned in the lower-left corner of the pttern. The emroidery frme moves so tht the needle is positioned correctly. To cncel the strting point setting nd return the strting point to the center of the pttern, press. Use to select different strting point for emroidering. Emroidering E-41

108 REVISING THE PATTERN d Press. e Press. h After the chrcters re emroidered, cut the threds to generous length, remove the emroidery frme, nd then ttch the emroidery frme gin so tht the remining chrcters ( DEF ) cn e emroidered. i End of the emroidering As in step, select the chrcter ptterns for DEF. j Press. f Press to turn off the thred cutting function nd then press. k Press. Press the Strt/Stop utton. g The needle is positioned in the lower-left corner of the pttern. The emroidery frme moves so tht the needle is positioned correctly. l Press. E-42

109 REVISING THE PATTERN m Use to lign the needle with the end of emroidering for the previous pttern. E 1 Emroidery n Press the Strt/Stop utton to egin emroidering the remining chrcter ptterns. The thred color displyed on the screen will e gryed out. Uninterrupted Emroidering (Monochrome - Using Single Color) A selected pttern cn e stitched out in one color insted of multicolor. The mchine will hesitte ut not stop etween color steps, nd then continue till the pttern is completed. Press for the multicolor steps to ecome shded nd the selected pttern will emroider in single color, insted of chnging the thred while emroidering. Press gin to return to the pttern s originl settings. Memo Even if uninterrupted emroidering hs een set, the utomtic thred cutting function nd the thred trimming function cn e used (see pge E-32). * Press to disply ll the function keys on the screen. Emroidering E-43

110 USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Emroidery Dt Precutions Oserve the following precutions when using emroidery dt other thn tht creted nd sved in this mchine. CAUTION When using emroidery dt other thn our originl ptterns, the thred or needle my rek when sewing with stitch density tht is too fine or when sewing three or more overlpping stitches. In tht cse, use one of our originl dt design systems to edit the emroidery dt. Types of Emroidery Dt tht cn e Used Only.pes,.phc, nd.dst emroidery dt files cn e used with this mchine. Using dt other thn tht sved using our dt design systems or mchines my cuse the emroidery mchine to mlfunction. Types of USB Devices/Medi tht cn e Used Stitch dt cn e sved to or reclled from USB medi. Use medi tht meets the following specifictions. USB Flsh drive (USB Flsh memory) USB Floppy disk drive Stitch dt cn e reclled only. USB CD-ROM, CD-R, CD-RW drives You cn lso use the following types of medi with the USB Memory Crd Reder/USB crd writer module. Secure Digitl (SD) Crd CompctFlsh Memory Stick Smrt Medi Multi Medi Crd (MMC) XD-Picture Crd The processing speed my vry y quntity of dt stored. Some USB medi my not e usle with this mchine. Plese visit our wesite for more detils. The ccess lmp will egin linking fter inserting USB devices/medi, nd it will tke out 5 to 6 seconds to recognize the devices/medi. (Time will differ depending on the USB device/medi). Memo To crete file folders, use computer. Letters nd numerls cn e used in the file nmes. In ddition, if the file nme contins no more thn eight chrcters, the entire file nme will pper on the screen. If the file nme is more thn eight chrcters long, only the first six chrcters followed y ~ nd numer pper s the file nme. E-44

111 USING THE MEMORY FUNCTION Computers nd Operting Systems with the Following Specifictions cn e Used Comptile models: IBM PC with USB port s stndrd equipment IBM PC-comptile computer equipped with USB port s stndrd equipment Comptile operting systems: Microsoft Windows XP, Windows Vist, Windows 7 Precutions on Using the Computer to Crete nd Sve Dt If the nme of the emroidery dt file/folder cnnot e identified, for exmple, ecuse the nme contins specil chrcters, the file/folder is not displyed. If this occurs, chnge the nme of the file/folder. We recommend using the 26 letters of the lphet (uppercse nd lowercse), the numers 0 through 9, -, nd _. If emroidery dt lrger thn 30 cm 18 cm (pprox.12 inches 7 inches) is selected, messge is shown sking if you wish to rotte the pttern 90 degrees. Even fter eing rotted 90 degrees, emroidery dt lrger thn 30 cm 18 cm (pprox. 12 inches 7 inches) cnnot e used. (All designs must e within the 30 cm 18 cm (pprox. 12 inches 7 inches) design field size.).pes files sved with the numer of stitches or the numer of colors exceeding the specified limits cnnot e displyed. The comined design cn not exceed mximum numer of 500,000 stitches or mximum numer of 125 color chnges (Aove numers re pproximte, depending on the overll size of the design). Use one of our design softwre progrms to edit the emroidery pttern so tht it meets these specifictions. Emroidery dt stored in folder creted in USB medi cn e retrieved. Do not crete folders in Removle Disk on computer. If emroidery dt is stored in folder in Removle Disk, tht emroidery dt cnnot e retrieved y the mchine. Even if the emroidery unit is not ttched, the mchine will recognize emroidery dt. Tjim (.dst) Emroidery Dt.dst dt is displyed in the pttern list screen y file nme (the ctul imge cnnot e displyed). Only the first eight chrcters of the file nme cn e displyed. Since Tjim (.dst) dt does not contin specific thred color informtion, it is displyed with our defult thred color sequence. Check the preview nd chnge the thred colors s desired. E 1 Emroidery Emroidering E-45

112 USING THE MEMORY FUNCTION Sving Emroidery Ptterns in the Mchine s Memory You cn sve emroidery ptterns tht you hve customized nd will use often; for exmple, your nme, ptterns tht hve een rotted or hd the size chnged, ptterns tht hve hd the sewing position chnged, etc. A totl of out 2 MB of ptterns cn e sved in the mchine's memory. Do not turn the min power to OFF while the Sving screen is displyed. You will lose the pttern you re sving. Memo It tkes few seconds to sve pttern to the mchine s memory. See pge E-49 for informtion on retrieving sved pttern. Press when the pttern you wnt to sve is in the emroidery screen. Press. * Press to return to the originl screen without sving. The Sving screen is displyed. When the pttern is sved, the disply returns to the originl screen utomticlly. If the Memory is Full If the screen elow displys, either the mximum numer of ptterns hve een sved or the pttern you wnt to sve tkes lot of memory, nd the mchine cnnot sve it. If you delete previously sved pttern, you cn sve the current pttern. Press. * Press to return to the originl screen without sving. The mchine displys the ptterns currently sved. E-46

113 USING THE MEMORY FUNCTION Select the pttern you wnt to delete. Sving Emroidery Ptterns to USB Medi When sending emroidery ptterns from the mchine to USB medi, plug the USB medi into the mchine s USB port. E 1 c Press. Memo USB medi is commercilly ville, ut some USB medi my not e usle with this mchine. Plese visit our wesite for more detils. Depending on the type of USB medi eing used, either directly plug the USB device into the mchine s USB port or plug the USB medi Reder/Writer into the mchine s USB port. The USB medi cn e inserted or removed t ny time except while sving or deleting pttern. Emroidery Amount of memory used y the pttern to e deleted Amount of memory needed to sve the current pttern Press when the pttern you wnt to sve is in the emroidery screen. d Press. * If you decide not to delete the pttern, press. The Sving screen displys. When the pttern is sved, the disply returns to the originl screen utomticlly. Do not turn the min power to OFF while the Sving screen is displyed. You will lose the pttern you re sving. Memo If there is enough memory ville fter deleting the pttern, the pttern you wnt to sve will e sved utomticlly. If there is not enough memory ville fter deleting the pttern, repet the steps ove to delete nother pttern from the mchine s memory. It tkes few seconds to sve pttern. See pge E-49 for more informtion out retrieving sved ptterns. Emroidering E-47

114 USING THE MEMORY FUNCTION Insert the USB medi into the USB port on the mchine. Sving Emroidery Ptterns in the Computer Using the included USB cle, the mchine cn e connected to your computer, nd the emroidery ptterns cn e temporrily retrieved from nd sved in the Removle Disk folder in your computer. A totl of out 3 MB of emroidery ptterns cn e sved in the Removle Disk, ut the sved emroidery ptterns re deleted when the mchine is turned OFF. USB port USB medi The processing speed my vry y quntity of dt. Two USB medi cnnot e used with this mchine t the sme time. If two USB medi re inserted, only the USB medi inserted first is detected. Do not insert nything other thn USB medi into the USB medi port. Otherwise, the USB medi drive my e dmged. Do not turn the min power to OFF while the Sving screen is displyed. You will lose the pttern you re sving. Plug the USB cle connector into the corresponding USB ports for the computer nd for the mchine. Turn on your computer nd select Computer (My computer). * The USB cle cn e plugged into the USB ports on the computer nd emroidery mchine whether or not they re turned on. c Press. * Press to return to the originl screen without sving. The Sving screen is displyed. When the pttern is sved, the disply returns to the originl screen utomticlly. Do not insert or remove USB medi while Sving screen is displyed. You will lose some or ll of the pttern you re sving. USB port for computer USB cle connector The Removle Disk icon will pper in Computer (My computer) on the computer. The connectors on the USB cle cn only e inserted into port in one direction. If it is difficult to insert the connector, do not insert it with force. Check the orienttion of the connector. For detils on the position of the USB port on the computer (or USB hu), refer to the instruction mnul for the corresponding equipment. E-48

115 USING THE MEMORY FUNCTION c Press when the pttern you wnt to sve is in the emroidery screen. Retrieving Ptterns from the Mchine s Memory Press. E 1 Emroidery d Press. * Press to return to the originl screen without sving. The mchine displys the ptterns currently in the memory. Press the key of the pttern you wnt to retrieve. * Press to return to the originl screen. e The pttern will e temporrily sved to Removle Disk under Computer (My computer). Select the pttern s.phc file in Removle Disk nd copy the file to the computer. c Press. The emroidery screen is displyed. Emroidering E-49

116 USING THE MEMORY FUNCTION Reclling from USB Medi You cn recll specific emroidery pttern from either direct USB medi or folder in the USB medi. If the pttern is in folder, check ech folder to find the emroidery pttern. The processing speed my vry y quntity of dt. Insert the USB medi into the USB port on the mchine (see pge E-47). c Folder nme Emroidery ptterns in USB medi c Pth * The pth shows the current folder t the top of the list. Emroidery ptterns nd sufolders within folder re displyed. USB port USB medi Press. d * Press to return to the previous folder. * Use the computer to crete folders. Folders cnnot e creted with the mchine. Press the key of the pttern you wnt to retrieve. * Press to return to the originl screen. e Press. * Press to delete the pttern. The pttern will e deleted from the USB medi. Emroidery ptterns nd folder in top folder re displyed. c Press when there is sufolder to sort two or more stitch ptterns to USB medi, the emroidery pttern in the sufolder is displyed. * Press to return to the originl screen without reclling. The emroidery screen is displyed. E-50

117 USING THE MEMORY FUNCTION Reclling from the Computer Plug the USB cle connector into the corresponding USB ports for the computer nd for the mchine (see pge E-48). On the computer, open Computer (My computer) then go to Removle Disk. d Press. E 1 Emroidery e The ptterns in the computer re displyed on the selection screen. Press the key of the pttern you wnt to recll. * Press to return to the originl screen. c Move/copy the pttern dt to Removle Disk. f Press. Pttern dt in Removle Disk is written to the mchine. While dt is eing written, do not disconnect the USB cle. Do not crete folders within Removle Disk. Since folders re not displyed, stitch pttern dt within folders cnnot e reclled. The emroidery screen is displyed. Emroidering E-51

118 EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS Using Frme Pttern to Mke n Appliqué (1) You cn use frmed ptterns of the sme size nd shpe to crete n ppliqué. Emroider one pttern with stright stitch nd one pttern with stin stitch. c Apply thin lyer of fric glue or temporry spry dhesive to the rer of the ppliqué creted in step. Attch the ppliqué to the se fric mtching the shpes. Select stright stitch frme pttern. Emroider the pttern onto the ppliqué mteril, then cut netly round the outside of the shpe. d Select the stin stitch frme pttern of the sme shpe s the ppliqué. Emroider over the ppliqué nd se fric from step c to crete the ppliqué. Emroider the sme pttern from step onto the se fric. If you chnge the size or position of the ptterns when selecting them, mke note of the size nd loction. Appliqué mteril E-52

119 EMBROIDERY APPLICATIONS Using Frme Pttern to Mke n Appliqué (2) This is second method to mke ppliqué using emroidery ptterns. You do not hve to chnge the fric in the emroidery frme using this method. Emroider one pttern with stright stitch nd one pttern with stin stitch. Select stright stitch frme pttern, nd emroider the pttern onto the se fric. d Remove the emroidery frme from the emroidery unit, nd cut round the outside of the stitches. E 1 Emroidery e Do not remove the fric from the emroidery frme to cut it. Also, do not pull or push on the fric. Otherwise, the fric my loosen in the frme. Select the stin stitch frme pttern of the sme shpe s the ppliqué. Plce the ppliqué fric over the pttern emroidered in step. * Be sure tht the ppliqué fric completely covers the stitched line. c Emroider the sme pttern on the ppliqué fric. Do not chnge the size or position of the pttern. If you chnge the size or position of the ptterns when selecting them, mke note of the size nd loction. Appliqué mteril Emroidering E-53

120 EMBROIDERY APPLICATIONS f Rettch the emroidery frme to the emroidery unit, nd emroider the stin stitch pttern to crete n ppliqué. Connect to the mchine the medi contining the creted split emroidery pttern, nd then select the split emroidery pttern to e emroidered. * For detils on reclling ptterns, refer to Selecting Ptterns from Emroidery Crds on pge E-7, Reclling from USB Medi on pge E-50, or Reclling from the Computer on pge E-51. Sewing Split Emroidery Ptterns Split emroidery ptterns creted with Plette Ver.7 or lter cn e sewn. With split emroidery ptterns, emroidery designs lrger thn the emroidery hoop re divided into multiple sections, which comine to crete single pttern fter ech section is sewn. For detils on creting split emroidery ptterns nd for more detiled sewing instructions, refer to the Instruction mnul included with Plette Ver.7 or lter. The following procedure descries how to red the split emroidery pttern shown elow from USB medi nd emroider it. A screen ppers so tht section of the split emroidery pttern cn e selected. Select section to e emroidered. * Select the sections in lpheticl order. * A mximum of 12 sections cn e displyed in one pge. If there re 13 or more sections in the pttern, press or to disply the previous or next pge. E-54

121 c Press. e f EMBROIDERY APPLICATIONS Press the Strt/Stop utton to emroider the pttern section. When emroidering is finished, the following screen ppers. Press. E 1 Emroidery A screen ppers so tht section of the split emroidery pttern cn e selected. d If necessry, edit the pttern. g Repet steps through f to emroider the remining sections of the pttern. * For detils, refer to REVISING THE PATTERN on pge E-36. Memo The pttern cn e rotted 90 to either the left or right when is pressed. Emroidering E-55

122 EEmroidering Chpter 2 Emroidery Edit EXPLANATION OF FUNCTIONS...57 SELECTING PATTERNS TO EDIT...58 Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet Ptterns/Frme/Boin Work Ptterns...59 Selecting Alphet Chrcter Ptterns...59 EDITING PATTERNS...61 Key Functions Moving the Pttern...63 Rotting the Pttern...63 Chnging the Size of the Pttern...63 Deleting the Pttern...63 Displying Ptterns in the Screen Mgnified y 200%...63 Chnging the Configurtion of Chrcter Ptterns...64 Chnging Chrcter Spcing...64 Reducing Chrcter Spcing...65 Seprting Comined Chrcter Ptterns...65 Chnging the Color of Ech Alphet Chrcter in Pttern...66 Emroidering Linked Chrcters...67 Chnging the Thred Color...67 Creting Custom Thred Tle...68 Adding Color to the Custom Thred Tle from the List Sving the Custom Thred Tle to USB medi Reclling the Custom Thred Tle dt from USB medi Choosing Color from the Custom Thred Tle...72 Designing Repeted Ptterns...73 Sewing Repeted Ptterns Repeting One Element of Repeted Pttern Color Sorting Repeted Ptterns Assigning Thred Mrks Emroidering the Pttern Repetedly...77 Duplicting Pttern...79 After Editing...79 COMBINING PATTERNS...80 Editing Comined Ptterns...80 Selecting comined emroidery ptterns Sewing Comined Ptterns...83 VARIOUS EMBROIDERING FUNCTIONS...84 Uninterrupted Emroidering (Monochrome - Using Single Color)...84 Bsting Emroidery...84 USING THE MEMORY FUNCTION... 85

123 EXPLANATION OF FUNCTIONS EXPLANATION OF FUNCTIONS With the Emroidery Edit functions, you cn comine emroidery ptterns nd chrcter ptterns, chnge the size of ptterns, rotte ptterns, nd perform mny other editing functions. This mchine cn perform the 9 functions listed elow. Comine Ptterns You cn esily crete comintions of emroidery ptterns, frme ptterns, chrcter ptterns, ptterns from the mchine s memory, ptterns from seprtely sold emroidery crds, nd mny other ptterns. Move Ptterns Within the 30 cm 18 cm (pprox. 12 inches 7 inches) wide emroidery re, you cn chnge the position of ptterns, nd check the position on the LCD. E 2 Emroidery Edit Rotte Ptterns You cn rotte ptterns one degree, ten degrees or ninety degrees t time. Enlrge or Reduce Ptterns You cn mke ptterns lrger or smller. This function is not ville for some ptterns. Crete Mirror Imges You cn crete horizontl mirror imges. This function is not ville for some ptterns. Chnge Alphet Chrcter Spcing You cn increse or decrese the spcing etween chrcters in comined ptterns. Chnge Alphet Chrcter Appernce/Lyout You cn chnge the lyout of the chrcters to curved line, digonl, etc. There re 6 choices totl. Chnge the Thred Colors of Ptterns You cn chnge the thred colors of the pttern to your fvorite colors. Creting Repeting Pttern You cn dd copies of pttern to crete pttern tht repets in verticl or horizontl direction. Emroidering E-57

124 SELECTING PATTERNS TO EDIT SELECTING PATTERNS TO EDIT Prepre the mchine for emroidery ccording to the instructions on BEFORE EMBROIDERING of Bsic opertions, nd press, then / to disply the screen elow. c f d e g h i j By Lock Exclusives Emroidery ptterns c Florl lphet ptterns d Frme ptterns e Chrcter ptterns f Boin work ptterns (see pge E-92) g Ptterns sved in the mchine s memory (see pge E-49) h Ptterns sved in USB medi (see pge E-50) i Ptterns sved on the computer (see pge E-51) j Press this key to position the emroidery unit for storge. Memo See included Quick Reference Guide for more informtion on ech ctegory s selection screen. E-58

125 SELECTING PATTERNS TO EDIT Selecting Emroidery Ptterns/By Lock Exclusives /Florl Alphet Ptterns/Frme/Boin Work Ptterns Select the ctegory of the pttern. * Refer to CREATING BOBBIN WORK on pge E-92 out the oin work ptterns. Press the key of the pttern you wnt to edit. * See pge E-4 nd E-7 for more informtion on selecting ptterns. The pttern is displyed in the top prt of the screen. Selecting Alphet Chrcter Ptterns When you select chrcter ptterns from the Emroidery Edit screen, you cn edit the ppernce of the pttern t the sme time. Press. E 2 Emroidery Edit c Press. Select the font, then enter the chrcters. (Exmple: A B C) * See pge E-5 for more informtion out selecting chrcters. d The pttern selected for editing is outlined in red on the Emroidery Edit disply. Proceed to EDITING PATTERNS on pge E-61 to edit the pttern. Emroidering E-59

126 SELECTING PATTERNS TO EDIT c Press pttern. to chnge the lyout of the f After you finish your selections, press. * If the chrcters re too smll to see, press to view disply of ll entered chrcters. d Select the lyout. (Exmple: ) When selecting n rc, use nd to chnge the degree of the rc. g The Emroidery Edit screen will pper. Proceed to EDITING PATTERNS on pge E-61 to edit the pttern. * Press to mke the rc fltter. * Press to mke the rc rounder. Memo When selecting, nd chnge to nd. You cn increse or decrese the incline. e Press to return to the originl screen. E-60

127 EDITING PATTERNS EDITING PATTERNS E 2 d d Emroidery Edit c e c e Shows the size of the entire comined pttern. Shows the size of the pttern currently selected. c Shows the distnce from the center of the frme. d Shows the color sequence nd times of ech step of the pttern currently selected. e Shows the degree of rottion for the pttern. Memo If key disply is light gry, you cnnot use tht function with the selected pttern. Emroidering E-61

128 EDITING PATTERNS Key Functions f c d e g h i p n m l k j o No. Disply Key Nme Explntion Pge Mgnify key Press this key to mgnify the pttern y 200% in the screen. E-63 Thred plette key Press this key to chnge the colors of the displyed pttern. E-67 c Rotte key Press this key to rotte the pttern. You cn rotte pttern one degree, ten degrees or ninety degrees t time. d Size key Press this key to chnge the size of the pttern. Ptterns cn e enlrged or reduced. e Arry key Press this key to chnge the configurtion of chrcter pttern. E-64 f Multi color key Press this key to chnge the color of individul chrcters in pttern. E-66 g Chrcter spcing key E-38 E-37 Press this key to chnge the spcing of chrcter ptterns. E-64 h Add key Press this key to dd nother pttern to the editing pttern. E-79 i Delete key Press this key to delete the selected pttern (the pttern outlined y the red E-63 ox). j Emroidery key Press this key to cll up the Emroidery screen. E-79 k Pttern select key When comined pttern is selected, use these keys to select prt of the pttern to edit. E-66 l Duplicte key Press this key to duplicte pttern. E-79 m Density key Press this key to chnge the density of frme ptterns or chrcter ptterns. E-40 n Horizontl mirror imge key Press this key to mke horizontl mirror imge of the selected pttern. E-39 o Border key Press this key to mke nd edit repeting pttern. E-73 p Arrow keys Press these keys to move the pttern in the direction indicted y the rrow on E-36 ( Center key) the key. (Press to return the pttern to its originl position.) E-62

129 EDITING PATTERNS Moving the Pttern For detils on moving the pttern, refer to Moving the Pttern on pge E-36. Rotting the Pttern Displying Ptterns in the Screen Mgnified y 200% Press. E 2 For detils on rotting the pttern, refer to Rotting the Pttern on pge E-38. Chnging the Size of the Pttern Emroidery Edit For detils on chnging the size of the pttern, refer to Chnging the Size of the Pttern on pge E-37. Deleting the Pttern Press to delete the pttern from the screen. The pttern is mgnified y 200%. Check the displyed pttern. Use in ny direction. to scroll through the disply c To disply the pttern ck to the norml size (100%), press. Emroidering E-63

130 EDITING PATTERNS Chnging the Configurtion of Chrcter Ptterns Press. Chnging Chrcter Spcing Press. Press the key of the lyout you wnt to emroider. * See pge E-60 for more informtion out lyout types. Use to chnge the spcing. * Press to increse the chrcter spcing. * Press to decrese the chrcter spcing. * Press to return the pttern to its originl ppernce. The disply will show the selected lyout. c Press. c Press to return to the originl screen. E-64

131 EDITING PATTERNS Reducing Chrcter Spcing The spcing etween chrcters cn e reduced to 50% of the nrrowest chrcter in the group. It is not recommended to edit dt nd trnsfer to other or older version mchines. Sme fetures do not pply in other mchines, so prolems my occur. Chrcter spcing cn e reduced only when chrcters re rrnged normlly on stright line. Seprting Comined Chrcter Ptterns Comined chrcter ptterns cn e seprted to djust the chrcter spcing or to seprtely edit the ptterns fter ll chrcters hve een entered. Press. E 2 Emroidery Edit Press. The key ppers s. Emroidering E-65

132 EDITING PATTERNS c Use to select where the pttern is to e seprted, nd then press to seprte it. For this exmple, the pttern will e seprted etween T nd. Chnging the Color of Ech Alphet Chrcter in Pttern Press so you cn ssign thred color to ech chrcter. d Use A seprted chrcter pttern cnnot e comined gin. to select pttern, nd Chnge the thred to sew ech chrcter in different color. * Press to chnge the colors in the sewing order. then use to djust the chrcter spcing. Color for ech chrcter e Press. E-66

133 EDITING PATTERNS Emroidering Linked Chrcters You cn emroider linked chrcters exmpled elow, in single row when the pttern extends eyond the emroidery frme. For detils on emroidering linked chrcters, refer to Emroidering Linked Chrcters on pge E-41. Exmple: Linking DEF to the chrcters ABC c Press to choose new color from the color plette. * To return to the originl color, press. If multiple colors hve een chnged, this commnd will return ll colors to their originl colors. * You cn select colors from the color plette y directly touching the color selection with the touch pen. * Touch to ctivte your color plette. E 2 Emroidery Edit Chnging the Thred Color You cn chnge the thred color y moving the color to e chnged to the top of the sewing order nd selecting new color from the thred colors in the mchine. In the pttern editing screen, press. Color plette The selected color ppers t the top of the sewing order. The thred color plette screen displys. d Press. Press or to put the color you wnt to chnge t the top of the sewing order. 64 Emroidery threds tle The disply shows the chnged colors. Memo To select color from the Custom Thred Tle, Choosing Color from the Custom Thred Tle on pge E-72. Emroidering E-67

134 EDITING PATTERNS Creting Custom Thred Tle You cn crete custom thred tle contining the thred colors tht you most often use. You cn select thred colors from the mchine s extensive list of thred colors from nine different thred rnds. You cn select ny color nd move the color to your custom thred tle. Some mchines my lredy hve n dditionl 300 Roison-Anton thred colors contined in the custom thred tle. 300 Roison-Anton thred colors tle dt cn e downloded from our wesite Use to choose where to dd color on the custom thred tle. * You cn choose colors from the custom thred tle y directly touching the screen with the touch pen. * You cn scroll through 100 colors t time using nd on the custom thred tle. In the pttern editing screen, press nd then press. Custom thred tle Press to recll the custom thred tle dt (See pge E-71) c Use to select one of the thred rnds in the mchine. E-68

135 EDITING PATTERNS d Use to enter color s 4-digit numer. * If you mke mistke, press to erse the entered numer, nd then enter the correct numer. f Repet the previous steps until ll desired thred colors re specified. * To delete specified color from the plette, select the color to e deleted, nd then press. * To delete ll the specified color from the plette, press. E 2 You cn sve the creted custom thred tle dt. Refer to Sving the Custom Thred Tle to USB medi on pge E-70 for the detiled procedure. Emroidery Edit g Press to return to the originl screen. Thred rnd e Press. Adding Color to the Custom Thred Tle from the List Repet the previous steps through c on pge E-68. Press to disply the thred list. Thred rnd Entered thred color numer The selected thred color is set in the custom thred tle. If is not pressed, the thred color numer will not e chnged. Emroidering E-69

136 EDITING PATTERNS c Use to select thred color. Press nd then press. Thred list Thred rnd c Set your desired colors in the custom thred tle ccording to the procedure in Creting Custom Thred Tle on pge E-68. Insert the USB medi into the USB port on the mchine. d Press. e Repet the previous steps until ll desired thred colors re specified. * To delete specified color from the plette, select the color to e deleted, nd then press. * To delete ll the specified color from the plette, press. f Press to return to the originl screen. USB port USB medi Sving the Custom Thred Tle to USB medi You cn sve custom thred tle dt file to USB medi. Two USB medi cnnot e used with this mchine t the sme time. If two USB medi re inserted, only the USB medi inserted first is detected. Custom thred tle dt cn only e sved to USB medi. You cnnot sve the dt in the mchine s memory or in the computer. Custom thred tle dt is sved s.pcp dt file. E-70

137 EDITING PATTERNS d Press. Press nd then press. E 2 c Press. Emroidery Edit The Sving screen is displyed. When the dt is sved, the disply returns to the originl screen utomticlly. Do not insert or remove USB medi while Sving screen is displyed. You will lose some or ll of the dt you re sving. Reclling the Custom Thred Tle dt from USB medi You cn recll custom thred tle dt from USB medi. Do not store two or more.pcp dt file in USB medi. You cn only recll one custom thred tle dt t time. Insert the USB medi contining the custom thred tle dt into the USB port. The Sving screen is displyed. When the dt is loded to the mchine, the disply returns to the originl screen utomticlly. Do not insert or remove USB medi while Sving screen is displyed. You will lose some or ll of the dt you re sving. d The reclled custom thred tle is displyed on the screen. USB port USB medi Emroidering E-71

138 EDITING PATTERNS Choosing Color from the Custom Thred Tle c Press. You cn select color from the up to 300 thred colors you hve set in the custom thred tle. Press. Custom thred chnge key The custom thred tle will pper. The thred color plette screen displys. Press or to put the color you wnt to chnge t the top of the sewing order. d Press to choose new color from the custom thred tle. * Use nd to scroll through the custom thred tle. * Press to return to the originl color. * You cn choose colors from the custom thred tle y directly touching the screen with the touch pen. Custom thred tle The disply shows the chnged colors. e Press. E-72

139 EDITING PATTERNS Designing Repeted Ptterns Sewing Repeted Ptterns Using the order function, you cn crete stitches using repeted ptterns. You cn lso djust the spcing of the ptterns within repeted pttern stitch. Select pttern, nd then press. Press. d e E 2 Emroidery Edit Verticl direction Horizontl direction c Repeting nd deleting verticl keys d Repeting nd deleting horizontl keys e Spcing keys The pttern direction indictor will chnge depending on the direction selected. d Use to repet the pttern on top nd to repet the pttern t the ottom. * To delete the top pttern, press. c Select the direction in which the pttern will e repeted. * To delete the ottom pttern, press. c e Emroidering E-73

140 EDITING PATTERNS Adjust the spcing of the repeted pttern. e * To widen spcing, press. * To tighten spcing, press. Repeting One Element of Repeted Pttern By using the Cut function, you cn select one element of repeted pttern nd repet only tht single element. This function llows you to design complex repeted ptterns. Choose the direction in which the repeted pttern will e cut. * Press to cut horizontlly. * Press to cut verticlly. Press to chnge repeted pttern ck to one single pttern. Memo You cn only djust the spcing of ptterns included in the red frme. f Complete repeted ptterns y repeting steps c through e. g Press to finish repeting. Memo When there re two or more ptterns, ll ptterns will e grouped together s one pttern in the red frme. The pttern direction indictor will chnge depending on the direction selected. Use nd to select the cut line. When chnging the direction in which the pttern will e repeted, ll of the ptterns in the red frme will utomticlly e grouped s one repeting unit. Press to chnge repeted pttern ck to one single pttern. See the following section on how to repet one element of repeted pttern. The cut line will move. E-74

141 EDITING PATTERNS c Press. g Press to finish repeting. E 2 Emroidery Edit The repeted pttern will e divided into seprte elements. d Press. e Use nd to select the element to repet. Once you hve cut repeted pttern into seprte elements, you cnnot return to the originl repeted pttern. Ech element cn e edited seprtely in the edit screen. See Selecting comined emroidery ptterns on pge E-82. f Repet the selected element. Color Sorting Repeted Ptterns Press to utomticlly chnge the sewing order of colors in comined order emroidery ptterns so tht the sme color cn e continuously sewn. This llows you to continue sewing without repetedly chnging the upper thred or chnging the sewing order mnully. Memo In comined stitch ptterns tht contin two or more order ptterns or other ptterns comined with order ptterns, the sewing order of only the order ptterns is chnged. When group of two or more ptterns using order ptterns is repeted, the sewing order is chnged so tht the sme color cn e sewn continuously in ech pttern. Emroidering E-75

142 EDITING PATTERNS Press. Press. c Press sewn. to select the thred mrk to e Assigning Thred Mrks By sewing thred mrks, you cn esily lign ptterns when emroidering series. When sewing is finished on pttern, thred mrk in the shpe of n rrow will e sewn using the finl thred. When sewing series of ptterns, use the point of this rrow for positioning the following designs to e sewn. Memo When repetedly sewing individul ptterns, thred mrks cn e sewn round the perimeter of the pttern only. Memo When there re two or more elements, use nd or nd to select pttern tht you wnt to ssign thred mrk(s) to. E-76

143 d Press. EDITING PATTERNS Crete the repeted pttern with the thred mrk t the center of the end of the pttern. * Refer to Assigning Thred Mrks on pge E-76. E 2 Emroidery Edit Emroidering the Pttern Repetedly After creting the repeted pttern, rehoop the emroidery frme nd keep sewing for the next pttern. Memo The optionl order frme llows you to esily rehoop the fric without removing the emroidery frme from the mchine. Press, then. c Press the Strt/Stop utton to egin emroidering. When emroidering is finished, the thred mrk is sewn with the lst thred color. * The thred mrk sewn indictes the positioning point for the next emroidery. d Remove the emroidery frme. Emroidering E-77

144 EDITING PATTERNS e Rehoop the fric in the emroidery frme. Adjust the position of the fric so tht the emroidering re for the next pttern is within the emroidering re of the emroidery sheet. g Touch to set the strting point to the center top of the pttern. f Pttern emroidered first Position of pttern to e emroidered next c Emroidering re of emroidery sheet Attch the emroidery frme to the mchine, nd then touch. h Touch. i Press the positioning keys to move the emroidery frme until the strting point is ligned with the thred mrk on the fric. Positioning keys * Press to check the emroidering position. j Remove the thred mrk. k Press the Strt/Stop utton to egin emroidering. E-78

145 EDITING PATTERNS Duplicting Pttern Press. After Editing Press. E 2 Emroidery Edit The duplicte is positioned over the originl pttern. * To comine the pttern with other ptterns, select (see pge E-80). * See pge E-21 for more informtion out sewing ptterns. Memo If you wnt to return to the edit screen fter pressing, press. Duplicted pttern If multiple ptterns re displyed in the screen, only the pttern selected using nd is duplicted. Move nd edit ech duplicted pttern individully. Emroidering E-79

146 COMBINING PATTERNS COMBINING PATTERNS Editing Comined Ptterns Select. Exmple: Comining lphet chrcters with n emroidery pttern nd editing Press pttern. to select n emroidery c Press. E-80

147 d Press. f Select COMBINING PATTERNS nd enter Flower. * After selecting, press to chnge the chrcter cse, then enter the remining chrcters. E 2 Emroidery Edit e Press chrcters. to enter the lphet The chrcters you enter will e displyed in the center of the disply. * Press to return to the previous screen. g Press. h Use to move the chrcters. * With USB mouse, your finger or the touch pen, drg the chrcters to move them. i Press to chnge the lyout of the chrcters. Press. * See pge E-64 for more informtion out chnging the lyout. Emroidering E-81

148 COMBINING PATTERNS j Press to chnge the color of the chrcters. * See pge E-67 for more informtion out chnging the color. Memo Use to select ptterns tht re overlpping nd cnnot e selected y clicking them or y touching the screen. k When ll editing is finished, press. Selecting comined emroidery ptterns If multiple ptterns hve een comined, use to select the pttern to e edited. If USB mouse is connected, the pttern cn e selected y clicking it. Move the mouse to position the pointer over the desired pttern, nd then click the left mouse utton. In ddition, ptterns cn e selected y directly touching the screen with your finger or touch pen. E-82

149 COMBINING PATTERNS Sewing Comined Ptterns Comined ptterns will e emroidered in the order they were entered. In this exmple, the emroidery order will e s follows: Emroider. E 2 Follow the directions in Sewing Emroidery Ptterns on pge E-22. Emroidery Edit Emroider y following the color order on the right side of the disply. After the flowers re emroidered, the [+] cursor will move to the Flower prt of the pttern. Emroidering E-83

150 VARIOUS EMBROIDERING FUNCTIONS VARIOUS EMBROIDERING FUNCTIONS Uninterrupted Emroidering (Monochrome - Using Single Color) A selected pttern cn e stitched out in one color insted of multicolor. The mchine will hesitte ut not stop etween color steps, nd then continue till the pttern is completed. Press for the multicolor steps to ecome shded nd the selected pttern will emroider in single color, insted of chnging the thred while emroidering. Press gin to return to the pttern s originl settings. Press. In the Emroidery Bsting Distnce disply, use nd to specify the distnce from the pttern to the sting stitching. Memo The higher the setting, the frther the sting is from the pttern. The setting remins selected even if the mchine is turned off. c Press screen. to return to the previous d Press. e Press to select the sting setting. Bsting Emroidery Before emroidering, sting stitches cn e sewn long the outline of the pttern. This is useful for emroidering fric tht cnnot hve stilizer mteril ffixed with n iron or dhesive. By stitching stilizer mteril to the fric, shrinkge of the stitching or misligned pttern cn e minimized. It is recommended to finish comining nd editing the pttern efore selecting the sting setting. If the pttern is edited fter selecting the sting setting, the sting nd pttern my ecome misligned, nd the sting under the pttern my e difficult to remove fter emroidering is complete. When is pressed, the pttern is moved to the center. After selecting the sting setting, move the pttern to the desired position. E-84

151 USING THE MEMORY FUNCTION f Memo To cncel the setting, press. Bsting is dded to the eginning of the sewing order. Press the Strt/Stop utton to egin emroidering. g USING THE MEMORY FUNCTION When emroidering is finished, remove the sting stitching. E 2 Emroidery Edit In the sme wy s emroidery ptterns in Chpter 1, you cn sve nd retrieve edited emroidery ptterns to nd from the mchine s memory, personl computer, or USB medi. Refer to the relevnt sections in Chpter 1 on sving nd retrieving emroidery ptterns nd follow the sme procedures in order to sve nd retrieve edited emroidery ptterns. See pge E-44 for more informtion out the memory function. Emroidering E-85

152 EEmroidering Chpter 3 How to Crete Boin Work (Emroidery) ABOUT BOBBIN WORK...87 PREPARING FOR BOBBIN WORK...87 Required Mterils...87 Boin cse nd oin cover Lower thred Upper thred Needle Emroidery foot Fric Upper Threding...88 Prepring the Boin Thred...88 When tension is pplied to the oin thred When tension is not pplied to the oin thred CREATING BOBBIN WORK...92 Selecting the Pttern...92 Strt Emroidering...93 ADJUSTING THE THREAD TENSION...96 Adjusting the upper thred tension Adjusting the tension of the oin thred TROUBLESHOOTING...97 The thred ws ccidentlly cut utomticlly nd the oin thred is cught inside the mchine Correcting oin work tension The oin thred ctches on the tension spring of the oin cse... 97

153 ABOUT BOBBIN WORK ABOUT BOBBIN WORK Beutiful emroidery work, with three-dimensionl ppernce, cn e creted y winding the oin with medium to hevy weight thred or rion, which is too thick to e threded through the mchine s needle. The decortive thred or rion will stitch out on the underneth side of fric while emroidering with the fric wrong side fcing up. Boin work emroidery is creted using the oin work ptterns included with this mchine. Refer to the Quick Reference Guide out the oin work ptterns. PREPARING FOR BOBBIN WORK E 3 How to Crete Boin Work (Emroidery) Required Mterils Boin cse nd oin cover Lower thred We recommend the following types of threds for oin work. No.5 or finer hnd emroidery thred or decortive thred Boin cse (gry) There is notch t the loction indicted y the letter A. Flexile woven rion (Approx. 2mm (5/64 inch) is recommended.) Boin cover There re two smll v-shped ts on the ck of the oin cover s indicted y the letter B. The ts help hold the oin in plce so it does not lift up while thick thred is eing pulled through. * When wide rion or hevy weight threds re eing used, we recommend test emroidering with the thred through nd lso ypssing the oin cse tension to see which gives the est stitching results. If wide rion such s 3.5mm (pprox. 1/8 inch) is to e used, we recommend tht oin cse tension not e pplied. Refer to pge E-91 for more detiled instructions. Do not use thred hevier thn No.5 hnd emroidery thred. Some threds my not e pproprite for oin work. Be sure to sew tril stitches efore sewing on your project. Emroidering E-87

154 PREPARING FOR BOBBIN WORK Upper thred Emroidery thred (polyester thred) or monofilment (trnsprent nylon) thred. If you do not wish for the upper thred to e visile, we recommend using trnsprent nylon monofilment thred or polyester light weight thred (50wt. or ove) tht is the sme color s the lower thred. Needle Use needle pproprite for the upper thred nd fric eing used. Refer to Emroidery Step y Step of Bsic opertions. Emroidery foot Emroidery foot W+ with LED pointer Prepring the Boin Thred In order to crete oin work, the oin cse must e replced with the one for oin work. Before creting oin work, clen the oin cse nd the rce. Rise the needle nd emroidery foot, nd then turn off the mchine. Remove the emroidery unit. c Grsp oth sides of the needle plte cover, nd then slide it towrd you to remove it. Fric Be sure to emroider tril ptterns on piece of scrp fric, which includes the sme threds nd fric s wht is eing used in your project. Upper Threding The results my e ffected y the type of fric used. Before emroidering your project, e sure to emroider tril ptterns on piece of scrp fric tht is the sme s the fric used in the project. Instll needle pproprite for the upper thred nd fric to e used. For detils on instlling the needle, refer to CHANGING THE NEEDLE of Bsic opertions. d e Needle plte cover Remove the oin cse. Boin cse Use the clening rush included with the mchine or vcuum clener to remove ny lint nd dust from the rce nd its surrounding re. Attch the emroidery foot. Thred the mchine with the upper thred. c For detils on threding the mchine, refer to Upper Threding of Bsic opertions. Clening rush Rce E-88

155 f g Wipe the oin cse (gry) with soft lint free cloth to clen it. Insert the oin cse so tht the mrk on the oin cse ligns with the mrk on the mchine. PREPARING FOR BOBBIN WORK Instll the needle plte cover. h For detils on instlling the needle plte cover, refer to Clening the Rce of Appendix. E 3 * Align the nd mrks. i j Needle plte cover Instll the emroidery unit. Insert the thred til from the spool of thred through the hole in the oin from the inside to the outside. Hold the thred til while winding the thred round the oin y hnd. After winding the oin so it is filled s shown elow (out 80%), cut the thred. How to Crete Boin Work (Emroidery) mrk on the oin cse mrk on the mchine c Boin cse k Instll oin wound with n dequte mount of thred for pttern. The oin cse (gry) cnnot e used in ny wy other thn oin work. After creting oin work, refer ck to the steps in Prepring the Boin Thred on pge E-88 for removing nd clening the oin cse (gry), nd then reinstll the stndrd oin cse. CAUTION Be sure to use the oin cse (gry) when creting oin work. Using ny other oin cse my result in the thred ecoming tngled or dmge to the mchine. Mke sure tht the oin cse is correctly instlled. If the oin cse is incorrectly instlled, the thred my ecome tngled or the mchine my e dmged. For n estimted length of oin thred required for ech pttern, refer to the Quick Reference Guide included with the mchine. Be sure to use oin wound with enough thred. If the oin runs out of thred while sewing, the emroidery cnnot e completed. Depending on the thred thickness, it my not e possile to wind the oin with the necessry length of thred. In this cse, try winding the oin gin, or use lighter weight thred. Emroidering E-89

156 PREPARING FOR BOBBIN WORK CAUTION Use oin thred tht hs een correctly wound. Otherwise, the needle my rek or the thred tension will e incorrect. The included oin ws designed specificlly for this mchine. If oins from other models re used, the mchine will not operte correctly. Use only the included oin or oins of the sme type (prt code: X ). m Memo If inserting thred til through oin hole is difficult, oin cn e wound y holding the til nd wrpping thred round inside se. Then crefully trim thred til so it does not extend from the side of the oin. Instll the oin wound with thred. Whether or not tension should e pplied to the oin thred depends on the type of thred eing used. When tension is pplied to the oin thred Insert oin into oin cse so the thred unwinds from the left side. Then correctly pss the thred through the tension spring s shown elow. * Actul size This model Other models c 11.5 mm (pprox. 7/16 inch) l Slowly nd evenly wind the thred round the oin. For est results, wind the oin so the thred is snug nd not twisted. Using scissors crefully trim the thred til s close to the oin s possile. Beginning of wound thred CAUTION If thred extends eyond the top of the oin too much, the thred my ecome tngled or the needle my rek. Tension spring CAUTION When winding the oin, mke sure the thred is not fryed. Emroidering with fryed thred my result in the thred ctching on the tension spring of the oin cse, the thred completely ecoming tngled or dmge to the mchine. Do not guide the oin thred completely through the groove in the needle plte cover, otherwise the lower threding cnnot e done correctly. Thred only s fr s shown elow. E-90

157 PREPARING FOR BOBBIN WORK When tension is not pplied to the oin thred If the oin thred in the tril stitching is too tight nd djusting the oin cse tension does not help, do not pss the thred through the tension spring. Hold the oin with your left hnd so the thred unwinds from the right side nd hold the end of the thred with your right hnd. p q r Gently pull the upper thred to ring the oin thred up through the needle plte. A loop of the oin thred comes out through the hole in the needle plte. Insert tweezers through oin thred loop nd pull oin thred ove the needle plte. Align the upper thred nd oin thred, nd then pull out out 10 cm (pprox. 4 inches) of the threds nd pss them under the emroidery foot towrd the rer of the mchine. E 3 How to Crete Boin Work (Emroidery) n Pull out out 8 cm (pprox. 3 inches) of oin thred. o Lightly hold the end of the upper thred while turning the hndwheel towrd you (counterclockwise) until the mrk on the hndwheel ligns with the center top of mchine. s Instll the oin cover with ts. Boin cover This completes the upper nd lower threding. CAUTION When creting oin work, use the oin cover with ts, otherwise the thred my ecome tngled or the needle my rek. Emroidering E-91

158 CREATING BOBBIN WORK CREATING BOBBIN WORK Selecting the Pttern Prepre the mchine for oin work s descried in PREPARING FOR BOBBIN WORK on pge E-87. Turn on the mchine. Press. The crrige will move to the initiliztion position. To select oin work emroidery c pttern, press or (Emroidery). Emroidery ptterns for oin work B cnnot e used in the Emroidery Edit screen ( or ). d Press, then select one of the oin work emroidery ptterns. Emroidery ptterns for oin work pper with the letter B in the lower-left corner of the key. When oin work emroidery pttern is selected the emroidery sewing speed cn only e djusted from 100 spm to mximum of 350 spm. The eginning nd end of stitching re specified for oin work ptterns. They cnnot e used for norml emroidering. Recommended defult setting for oin work emroidery is 100 spm. CAUTION When creting oin work, e sure to select n emroidery pttern for oin work. If ny other type of pttern is selected, the mchine my e dmged. Boin work emroidery sewing speed defults to 100 spm when oin work emroidery pttern is selected. The Settings screen will only llow speed to e djusted from 100 spm to mximum sewing speed of 350 spm. Memo When n emroidery pttern for oin work is selected, the utomtic thred cutting function END COLOR TRIM is turned off. Afterwrd, if pttern other thn one for oin work is selected, the utomtic thred cutting function END COLOR TRIM is returned to the setting tht ws selected efore the emroidery pttern for oin work ws chosen. B mrk Regrdless of the setting tht hd een selected, the utomtic thred cutting function END COLOR TRIM is turned off. E-92

159 e Press. The emroidery screen is displyed. CREATING BOBBIN WORK f Press, nd then djust the tension of the upper thred. For detils on djusting the tension of the upper thred, refer to Adjusting Thred Tension on pge E-30. E 3 Since oin work is emroidered from the wrong side of the fric, the pttern shown in the screen ppers s mirror imge of the finl sewn emroidery. If necessry, flip the imge to preview it. In ddition, when emroidering with the thred colors shown in the emroidery screen, select oin thred tht mtches wht is shown in the screen. Strt Emroidering Memo We recommend setting etween 6 nd 8 for the upper thred tension. Hoop the fric so the right side of the fric is fcing down with the stilizer lying on the top. Use n emroidery frme tht fits the size of the pttern nd then ttch the frme to the mchine. These ptterns re emroidered from the wrong side of the fric so techniclly you re working in reverse of norml emroidering. How to Crete Boin Work (Emroidery) Imge shown in screen Sewn emroidery (Right side of fric) Wrong side of fric Memo With oin work emroidery ptterns, the size nd thred density cnnot e chnged. In ddition, the utomtic thred cutting function END COLOR TRIM cnnot e turned on. CAUTION Alwys use stilizer mteril for emroidery. Otherwise, the needle my rek nd cuse injuries. Not using stilizer mteril my result in poor finish to your project. Press. c Press. The screen chnges, nd ll keys nd opertion uttons re locked. Emroidering E-93

160 CREATING BOBBIN WORK d e Using the presser foot lever, rise the emroidery foot. To ring the oin thred ove the fric, rotte the hndwheel counterclockwise while holding the upper thred. j While holding oth the upper thred nd the oin thred, sew section of the pttern. k Stop the mchine, nd then tie the upper thred nd the oin thred together to secure the threds. f As shown elow, pull the upper thred to pull the oin thred up through the fric. l Strt emroidery gin to finish the pttern. Upper thred Boin thred Memo If the oin thred cnnot e pulled up, use n wl to crete smll hole to help pull oin thred to surfce. m Rise the needle nd emroidery foot, remove the emroidery frme, nd then cut the upper thred nd the oin thred. When cutting the threds, e sure to leve n dequte length of thred so they cn e properly secured. g Press uttons. to unlock ll keys nd Lower the emroidery foot. h i It is necessry to move to the eginning of stitching so press, nd then press. The emroidery frme moves to the eginning of stitching. E-94

161 CREATING BOBBIN WORK n Using hnd sewing needle such s rion emroidering needle, pull the oin thred to the top (wrong side) of the fric, nd then tie the upper thred nd the oin thred together. E 3 Memo If there is gp etween the strt point nd end point of the pttern, leve n dequte length of thred, cut the threds, nd remove the fric from the mchine. Use rion emroidering needle to hnd sew stitches to connect the strting nd ending points. How to Crete Boin Work (Emroidery) o Remove the fric from the emroidery frme, nd check the finished emroidery. Right side of fric Wrong side of fric p If the desired results could not e chieved, djust the tension of the oin thred nd the upper thred, nd then try emroidering the pttern gin. For more detils, refer to ADJUSTING THE THREAD TENSION on pge E-96. Memo Check oin fter ech oin work pttern is emroidered to mke sure there is dequte oin thred for the next pttern. While selecting the oin work pttern, the emroidery speed vlue is set to 100 spm. Refer to Adjusting the Emroidery Speed on pge E-33 to chnge the emroidery speed. Emroidering E-95

162 ADJUSTING THE THREAD TENSION ADJUSTING THE THREAD TENSION After emroidering tril ptterns nd checking the results, djust the thred tensions if necessry. After djusting the tensions, e sure to emroider tril ptterns gin in order to check the results. Adjusting the upper thred tension We recommend setting etween 6 nd 8 for the upper thred tension when creting oin work. Refer to Adjusting Thred Tension on pge E-30. Adjusting the tension of the oin thred If the desired stitching cnnot e chieved fter djusting the upper thred tension, djust the tension of the oin thred. The tension of the oin thred cn e djusted y turning the slotted-hed ( ) screw on the oin cse (gry) for oin work. Turning the screw on the oin cse (gry) my push up the spring plte, s shown elow. If this occurs, gently press down the spring plte with screwdriver so it is lower thn the top surfce of the oin cse (gry), nd then insert the oin cse into the mchine. Do not turn the phillips screw (+). Adjust with smll screwdriver. Spring plte To increse the tension of the oin thred, turn the slotted-hed ( ) screw 30 to 45 clockwise. To decrese the tension of the oin thred, turn the slotted-hed ( ) screw 30 to 45 counterclockwise. CAUTION DO NOT djust the position of the phillips (+) screw on the oin cse (gry) s this my result in dmge to the oin cse, rendering it useless. If the slotted-hed screw (-) is difficult to turn, do not use force. Turning the screw too much or providing force in either (rottionl) direction my cuse dmge to the oin cse. Should dmge occur, the oin cse my not mintin proper tension. If the oin thred tension is tight, the thred cnnot e pssed through the tension spring when the oin is instlled in the oin cse. (Refer to When tension is not pplied to the oin thred on pge E-91.) E-96

163 TROUBLESHOOTING TROUBLESHOOTING Severl solutions for minor prolems re descried elow. If the prolem persists, contct your nerest uthorized By Lock retiler. The thred ws ccidentlly cut utomticlly nd the oin thred is cught inside the mchine c Remove the emroidery frme. Cut the thred ner the fric ove the needle plte, nd then remove the fric. Remove the oin, nd then hold it out towrd the left side of the mchine. Correcting oin work tension * If the top thred shows on the oin side of the fric, increse the upper tension (Refer to ADJUSTING THE THREAD TENSION on pge E-96). * If the top thred still shows on the oin side of the fric, reduce the tension of the oin thred or ypss the oin tension. (Refer to ADJUSTING THE THREAD TENSION on pge E-96.) * Some oin threds re too corse to pss through to wrong side of fric. In this cse, e sure to color mtch top thred with oin threds. Exmple: Emroidery ptterns for oin work E 3 How to Crete Boin Work (Emroidery) d Lower the emroidery foot. Correct tension The upper thred tension is too loose, or the oin thred tension is too tight. e Apply slight tension on oin thred y holding thred out to the left side of emroidery foot. Press the Thred Cutter utton gin. The oin thred ctches on the tension spring of the oin cse Emroider with no tension pplied to the oin thred. (Refer to When tension is not pplied to the oin thred on pge E-91.) CAUTION Do not pull on the thred with excessive force, otherwise the mchine my e dmged. Emroidering E-97

164 TROUBLESHOOTING E-98

165 Appendix This section provides informtion on cring for your mchine. Find trouleshooting tips nd pointers s well s how to keep your mchine in the est working condition. Pge numer strts with A in this section. The screen displys nd mchine illustrtions my vry slightly, depending on the country or region. Chpter1 Mintennce nd Trouleshooting... A-2

166 A Appendix Chpter 1 Mintennce nd Trouleshooting CARE AND MAINTENANCE...3 Restrictions on oiling...3 Precutions on storing the mchine...3 Clening the LCD Screen...3 Clening the Mchine Csing...3 Clening the Rce...3 Clening the Cutter in the Boin Cse Are...5 Aout the Mintennce Messge...5 ADJUSTING THE SCREEN...6 Adjusting the Brightness of the Screen Disply...6 Touch Pnel is Mlfunctioning...6 TROUBLESHOOTING...7 ERROR MESSAGES...10 SPECIFICATIONS...13 UPGRADING YOUR MACHINE S SOFTWARE...14 Upgrde Procedure Using USB Medi...14 Upgrde Procedure Using Computer...15 INDEX...16

167 CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION Be sure to unplug the mchine efore clening it. Otherwise, electric shock or injury my result. A 1 Restrictions on oiling In order to prevent dmging this mchine, it must not e oiled y the user. This mchine ws mnufctured with the necessry mount of oil pplied to ensure correct opertion, mking periodic oiling unnecessry. If prolems occur, such s difficulty turning the hndwheel or n unusul noise, immeditely stop using the mchine, nd contct your nerest uthorized retiler. Precutions on storing the mchine Do not store the mchine in ny of the loctions descried elow, otherwise dmge to the mchine my result, for exmple, rust cused y condenstion. * Exposed to extremely high tempertures * Exposed to extremely low tempertures * Exposed to extreme temperture chnges * Exposed to high humidity or stem * Ner flme, heter or ir conditioner * Outdoors or exposed to direct sunlight * Exposed to extremely dusty or oily environments In order to extend the life of this mchine, periodiclly turn it on nd use it. Storing this mchine for n extended period of time without using it my reduce its efficiency. Clening the Mchine Csing If the surfce of the mchine is dirty, lightly sok cloth in neutrl detergent, squeeze it out firmly, nd wipe the surfce. Then wipe gin with dry cloth. Clening the Rce If dust or its of dirt collect in the rce or oin cse, the mchine will not run well, nd the oin thred detection function my not operte. Keep the mchine clen for est results. Press the Needle Position utton to rise the needle. Turn the min power to OFF. c d e Remove the needle nd emroidery foot (see pge B-46 through B-49). Remove the emroidery unit if it is ttched. Grsp oth sides of the needle plte cover, nd then slide it towrd you. Mintennce nd Trouleshooting Clening the LCD Screen If the screen is dirty, gently wipe it with soft, dry cloth. Do not use orgnic solvents or detergents. Do not wipe the LCD screen with dmp cloth. f Needle plte cover The needle plte cover is removed. Grsp the oin cse, nd then pull it out. Memo Occsionlly, condenstion my form on the LCD screen or it my ecome fogged up; however, this is not mlfunction. After while, the cloudiness will dispper. Boin cse Appendix A-3

168 CARE AND MAINTENANCE g Use the clening rush or vcuum clener to remove ny lint nd dust from the rce nd oin thred sensor nd the surrounding re. Clening rush Rce c Boin thred sensor i CAUTION Never use oin cse tht is scrtched; otherwise, the upper thred my ecome tngled, the needle my rek, or sewing performnce my suffer. For new oin cse (prt code: XC (no color on the screw), XE (gry, for oin work)), contct your nerest uthorized retiler. Mke sure tht you fit the oin cse properly, otherwise the needle my rek. Insert the ts on the needle plte cover into the needle plte, nd then slide the cover ck on. Do not pply oil to the oin cse. If lint or dust collects on the oin thred sensor, the sensor my not operte correctly. h Insert the oin cse so tht the mrk on the oin cse ligns with the mrk on the mchine. If the needle plte hs een removed it is especilly importnt to reinstll the needle plte nd tighten the screws prior to instlling the oin cse. * Align the nd mrks. mrk on the oin cse mrk on the mchine c Boin cse * Mke sure tht the indicted points re ligned efore instlling the oin cse. A-4

169 CARE AND MAINTENANCE Clening the Cutter in the Boin Cse Are The cutter elow the needle plte should e clened. If dust or lint ccumulte on the cutter, it will e difficult to cut the thred when the Thred Cutter utton is pressed or the utomtic thred cutting function is used. Clen the cutter when the thred is not esily cut. Follow steps through e in Clening the Rce on pge A-3 to remove the needle plte cover. Follow steps through e in Clening the Rce to remove the needle plte cover. Use the screwdriver included with the mchine to unscrew nd remove the needle plte. d e Use the screwdriver included with the mchine to screw nd ttch the needle plte. Insert the ts on the needle plte cover into the needle plte, nd then slide the cover ck on. Aout the Mintennce Messge A 1 Mintennce nd Trouleshooting c Use the clening rush or vcuum clener to remove ny lint nd dust from the cutter in the oin cse re. Once this messge ppers, it is recommended to tke your mchine to your nerest uthorized retiler for regulr mintennce check. Although this messge will dispper nd the mchine will continue to function once you press, the messge will disply severl more times until the pproprite mintennce is performed. Plese tke the time to rrnge the mintennce your mchine requires once this messge ppers. Such steps will help to ensure you receive continued, uninterrupted hours of mchine opertion for the future. Cutter CAUTION Do not touch the cutter, otherwise injuries my result. Appendix A-5

170 ADJUSTING THE SCREEN ADJUSTING THE SCREEN Adjusting the Brightness of the Screen Disply If the screen does not look very cler under certin sitution, you cn djust the rightness of the screen disply. Press. The settings screen ppers. Touch Pnel is Mlfunctioning If the screen does not respond correctly when you touch key (the mchine does not perform the opertion or performs different opertion), follow the steps elow to mke the proper djustments. Holding your finger on the screen, turn the min power switch to OFF nd ck to ON. c Disply pge 3 of the settings screen. Press or to djust the rightness of the screen disply. The touch pnel djustment screen is displyed. Using the included touch pen, lightly touch the center of ech +, in order from 1 to 5. Only use the included touch pen to touch the screen. Do not use mechnicl pencil, pin, or other shrp oject. Do not press too hrd on the screen. Otherwise, dmge my result * The screen ppers dim s the numer on the settings screen decreses. The screen ppers righter s the numer increses c Turn the min power to OFF, then turn it ck to ON. If you finish the screen djustment nd the screen still does not respond, or if you cnnot do the djustment, contct your uthorized retiler. A-6

171 TROUBLESHOOTING TROUBLESHOOTING If the mchine stops operting correctly, check the following possile prolems efore requesting service. You cn solve most prolems y yourself. Visit us t If the prolem persists, contct your nerest uthorized retiler. A 1 Prolem Cuse Solution Pge Upper threding is incorrect. Check the steps for threding the mchine B-38 nd rethred the mchine. The thred is tngled on the wrong side of the fric. The upper thred is too tight. Cnnot thred the needle Cnnot lower the presser foot with the presser foot lever Thred tension is incorrect Upper thred reks Using improper needle or thred for the selected fric. Check the informtion out the needle nd thred to e used. B-50, E-21 The oin thred is incorrectly instlled. Correctly instll the oin thred. B-36 Needle is not in the correct position. Press the Needle Position utton to rise B-11 the needle. Needle is instlled incorrectly. Reinstll the needle correctly. B-49 Needle is turned, ent or the point is dull. Replce the needle. B-49 Presser foot ws rised using the Presser Foot Lifter utton. Upper threding is incorrect. Boin is set incorrectly. Using improper needle or thred for the selected fric. Press the Presser Foot Lifter utton to lower the presser foot. Check the steps for threding the mchine nd rethred the mchine. Reset the oin. (If needle plte ws removed, reinstll needle plte nd tighten screws prior to instlling oin cse.) Check the informtion out the needle nd thred to e used. B-11 B-38 B-36 B-50, E-21 Emroidery foot is not ttched correctly. Rettch the emroidery foot correctly. B-46 Thred tension is set incorrectly. Adjust the thred tension. E-30 Boin thred is incorrectly wound. Use correctly wound oin. B-31 Needle is turned, ent or the point is dull. Replce the needle. B-49 Mchine is not threded correctly (used the Rethred the mchine correctly. B-38 wrong spool cp, spool cp is loose, the thred did not ctch the needle r threder, etc.) Needle is turned, ent or the point is dull. Replce the needle. B-49 There re scrtches on the oin cse. Replce the oin cse, or consult your A-3 uthorized retiler. Upper thred tension is too strong. Adjust the thred tension. E-30 Using improper needle or thred for the Check the informtion out the needle nd B-50, E-21 selected fric. thred to e used. Thred is twisted. Use scissors, etc., to cut the twisted thred nd remove it from the rce, etc. There re scrtches ner the hole in the presser foot. Replce the presser foot, or consult your uthorized retiler. Needle is instlled incorrectly. Reinstll the needle correctly. B-49 Thred is knotted or tngled. Rethred upper nd lower thred. B-36, B-38 A oin designed specificlly for this mchine Incorrect oins will not work properly. Only B-36 is not used. use oin designed specificlly for this mchine. Boin thred reks Boin is set incorrectly. Reset the oin thred correctly. B-36 There re scrtches on the oin or it doesn t Replce the oin. B-36 rotte properly. Thred is twisted. Use scissors, etc. to cut the twisted thred nd remove it from the rce, etc. A oin designed specificlly for this mchine is not used. Incorrect oins will not work properly. Only use oin designed specificlly for this mchine. B-46 B-36 Mintennce nd Trouleshooting Appendix A-7

172 TROUBLESHOOTING Prolem Cuse Solution Pge B-32 Boin thred does not wind netly on the oin. The thred is not pssed through the oin winding thred guide correctly. Boin spins slowly. The thred tht ws pulled out ws not wound onto the oin correctly. Correctly pss the thred through the oin winding thred guide. Press [+] in the oin winding window to increse the oin winding speed. Wind the thred tht ws pulled off round the oin 5 or 6 times clockwise. Skipped stitches Needle is turned, ent or the point is dull. Replce the needle. B-49 Using improper needle or thred for the Check the informtion out the needle nd B-50, E-21 selected fric. thred to e used. Mchine is threded incorrectly. Check the steps for threding the mchine B-38 nd rethred it correctly. Dust or lint hs collected under the needle Remove the dust or lint with the rush. A-3 plte. Needle is instlled incorrectly. Reinstll the needle correctly. B-49 Needle is defective. Replce the needle. B-49 Needle reks Needle is instlled incorrectly. Reinstll the needle correctly. B-49 Needle clmp screw is not tightened. Tighten the needle clmp screw. B-49 Needle is turned or ent. Replce the needle. B-49 Using improper needle or thred for the Check the needle nd fric comintion. B-50, E-21 selected fric. Upper thred tension is too strong. Adjust the thred tension setting. E-30 Fric is pulled during sewing. Do not pull the fric during sewing. Spool cp is set incorrectly. Check the method for ttching the spool cp, then rettch the spool cp. B-38 Fric does not feed through the mchine Fric puckers High-pitched sound while sewing Chrcter pttern does not turn out There re scrtches round the hole(s) in the emroidery foot. There re scrtches on the oin cse. Replce the emroidery foot, or consult your uthorized deler. Replce the oin cse, or consult your uthorized retiler. Needle is defective. Replce the needle. B-49 Upper threding is incorrect. Check the steps for threding the mchine B-38 nd rethred the mchine. Boin is set incorrectly. Reset the oin thred correctly. B-36 Emroidery foot is ttched incorrectly. Attch the emroidery foot correctly. B-46 Screw of the emroidery foot is loose. Securely tighten the screw of the emroidery B-46 foot. Stilizer is not ttched to fric eing Attch stilizer. E-11 emroidered. Boin thred is incorrectly wound. Use correctly wound oin. B-31 Needle is turned, ent or the point is dull. Replce the needle. B-49 Thred is entngled. Cut the entngled thred nd remove it from E-97 the rce. There is mistke in the upper or oin Check the steps for threding the mchine B-36, B-38 threding. nd rethred it correctly. Thred tension is set incorrectly. Adjust the thred tension. E-30 Needle is turned, ent or the point is dull. Replce the needle. B-49 Spool cp is set incorrectly. Check the method for ttching the spool B-38 cp, then rettch the spool cp. Pieces of thred re cught in the rce. Clen the rce. A-3 Upper threding is incorrect. Check the steps for threding the mchine B-38 nd rethred the mchine. There re scrtches on the oin cse. Replce the oin cse, or consult your A-3 uthorized retiler. A oin designed specificlly for this mchine is not used. Incorrect oins will not work properly. Only use oin designed specificlly for this mchine. Thred tension is set incorrectly. Adjust the thred tension. E-30 B-34 B-33 B-46 A-3 B-36 A-8

173 TROUBLESHOOTING Prolem Cuse Solution Pge There is no pttern selected. Select pttern. E-3, E-58 Strt/Stop utton ws not pushed. Press the Strt/Stop utton. B-11 Min power switch is not turned on. Turn the min power to ON. B-17 Presser foot is not lowered. Lower the presser foot. B-11 All keys nd uttons hve een locked y Press to unlock ll keys nd B-46, B-49. uttons. The screen hs een locked. Press either of the following keys to unlock Mchine does not operte Nothing hppens, even if the LCD disply is pressed The LCD screen is fogged up. Emroidery pttern does not sew out correctly Emroidery pttern does not sew out correctly Loops pper on the surfce of the fric when emroidering Emroidery unit does not operte Pointer of emroidery foot W+ with LED pointer does not indicte the position correctly the screen. Condenstion hs formed on the LCD screen. After while, the cloudiness will dispper. Thred is twisted. Fric ws not inserted into the frme correctly (fric ws loose, etc.). Stilizing mteril ws not ttched. There ws n oject plced ner the mchine, nd the crrige or emroidery frme hit the oject during sewing. Fric outside the frme edges interferes with the sewing rm, so the emroidery unit cnnot move. Fric is too hevy, so the emroidery unit cnnot move freely. Fric is hnging off the tle. Fric is sngged or cught on something. Emroidery frme ws removed during sewing (for exmple, to reset the oin). The emroidery foot ws umped or moved while removing or ttching the emroidery frme, or the emroidery unit ws moved. Use scissors, etc., to cut the twisted thred nd remove it from the rce, etc. If the fric is not stretched tight in the frme, the pttern my turn out poorly or there my e shrinkge of the pttern. Set the fric into the frme correctly. Alwys use stilizing mteril, especilly with stretch frics, lightweight frics, frics with corse weve, or frics tht often cuse pttern shrinkge. See your uthorized retiler for the proper stilizer. If the frme umps something during sewing, the pttern will turn out poorly. Do not plce nything in the re where the frme my ump it during sewing. Reinsert the fric in the emroidery frme so tht the excess fric is wy from the sewing rm, nd rotte the pttern 180 degrees. Plce lrge thick ook or similr oject under the rm hed to lightly lift the hevy side nd keep it level. If the fric is hnging off the tle during emroidery, the emroidery unit will not move freely. Plce the fric so tht it does not hng off the tle or hold the fric to keep it from drgging. Stop the mchine nd plce the fric so tht it does not get cught or sngged. If the emroidery foot is umped or the emroidery unit is moved during sewing, the pttern will not turn out. Be creful when removing or rettching the emroidery frme during sewing. Stilizer is incorrectly ttched, for exmple, it is smller thn the emroidery frme. Attch the stilizer correctly. E-11 The thred tension is incorrectly set. Adjust the thred tension. E-30 to E-32 The tension of the upper thred is incorrectly Use the emroidery needle plte cover. E-22 set for the comintion of the fric, thred nd pttern eing used. The comintion of the oin cse nd oin thred is incorrect. Chnge the oin cse or oin thred so tht the correct comintion is used. There is no pttern selected. Select pttern. E-3, E-58 Min power switch is not turned on. Turn the min power to ON. B-17 Emroidery unit is not ttched correctly. Rettch the emroidery unit correctly. B-44 Emroidery frme ws ttched efore the unit ws initilized. Perform the initiliztion process correctly. B-44 With thick or elstic fric, the position will e Mnully djust the position ccording to the B-48 misligned only t rised prts in the fric. thickness of the fric. With fric hving very uneven surfce, the position is not correctly ligned. The pointer indiction should e used only s reference. E-97 E-14 E-11 E-21 E-14 E-21 E-26 E-21 B-47 A 1 Mintennce nd Trouleshooting Appendix A-9

174 ERROR MESSAGES Prolem Cuse Solution Pge The sensor pen hs not een clirted. Before using the sensor pen for the first time, B-58 e sure to clirte it. Specifying with sensor pen cnnot e done ccurtely The pen is eing held differently thn when it ws clirted. When using the sensor pen, e sure to hold it t the sme ngle s when it ws clirted. The specifiction loction my e misligned if the pen is held t slightly different ngle. In this cse, mke fine djustments fter mking the selection. B-58 CAUTION This mchine is equipped with thred detection device. If the Strt/Stop utton is pushed efore the upper threding hs finished threding, the mchine will not operte properly. Also, depending on the pttern selected, the mchine my feed the fric even if the needle is rised. This is due to the needle r relese mechnism. At these times, the mchine will mke sound different from wht is mde during norml sewing. This is not the sign of mlfunction. If the power is disconnected during sewing: Turn the min power to OFF nd unplug the mchine. If you restrt the mchine, follow the instructions for operting the mchine correctly. ERROR MESSAGES If the mchine is not properly threded nd the Strt/Stop utton is pressed, or if the opertion procedure is incorrect, the mchine my not strt. An lrm sounds nd n error messge is displyed on the LCD. If n error messge displys, follow the instructions in the messge. Below is n explntion of error messges. Refer to these when necessry (if you press or do the opertion correctly while the error messge is displyed, the messge disppers). CAUTION Be sure to rethred the mchine. If you press the Strt/Stop utton without rethreding the mchine, the thred tension my e wrong or the needle my rek nd cuse injury. Mrks Error Messges Cuse/Solution A mlfunction occurred.turn the mchine off, then on gin. This messge is displyed if some mlfunction occurs. Attch the emroidery frme. Check nd rethred the upper thred. This messge ppers if the emroidery frme is not ttched when you press in the emroidery screen. (see pge B-60) This messge is displyed when the upper thred is roken or not threded correctly, nd the Strt/Stop utton is pressed. Dt volume is too lrge for this pttern. This messge is displyed when the ptterns you re editing tke up too much memory, or if you re editing too mny ptterns for the memory. Filed to sve file. This messge ppers when you try to sve more thn 100 settings screen imge files in the USB medi. In this cse, delete file from the USB medi or use different USB medi. (see pge B-28) Lower the presser foot lever. This messge is displyed when the Presser Foot Lifter utton is pushed while the presser foot lever is rised/the needle is lowered. Move the sensor pen wy from the currently mrked position. This messge ppers when you press down the sensor pen tip efore pressing nd keep pressing for the certin period. Move the sensor pen wy from the current position. A-10

175 ERROR MESSAGES Mrks Error Messges Cuse/Solution Not enough ville memory to sve the pttern. Delete nother pttern? OK to utomticlly lower the presser foot? OK to delete the selected pttern? This messge is displyed when the memory is full nd the pttern cnnot e sved. This messge is displyed when is pressed (the presser foot is rised). This messge is displyed when the selected pttern is out to e deleted. A 1 OK to recll nd resume previous memory? This messge ppers if the mchine is turned off while sewing, then turned on gin. Press to return the mchine to the condition (pttern position nd numer of stitches) when it ws turned off. Follow the procedure descried in If the Thred Breks During Sewing on pge E-27 to lign the needle position nd sew the reminder of the pttern. OK to reset the pttern s order setting, position nd/or ngle? This messge ppers when you try to use the utomtic positioning function using the sensor pen with the pttern, rotted or replced, or with the order pttern. (see pge B-60) OK to revert to the originl position nd/or ngle? This messge ppers when you try to use the utomtic positioning function using the sensor pen with the pttern, rotted or replced. (see pge B-60) Preventive mintennce is recommended. This messge is displyed when the mchine needs to e mintined. (see pge A-3) Mintennce nd Trouleshooting Retrieving the pttern. Wit moment. Sensor module error. Set the clock. The oin thred is lmost empty. The oin winder sfety device hs ctivted. Is the thred tngled? The crrige of the emroidery unit will move. Keep your hnds etc. wy from the crrige. The needle will move. Keep your hnds etc. wy from the needle re. The pttern extends out of the pttern re, repet positioning of center nd ngle using sensor pen. The pockets re full. Delete pttern. The sfety device hs een ctivted.is the thred tngled? Is the needle ent? The shutoff support mode hs een ctivted. Turn off the mchine. The upper thred my not e threded correctly. Thred the upper thred from the eginning. The USB medi ws chnged. Do not chnge the USB medi while it is eing red. There is no needle plte cover. Attch needle plte cover. This file cnnot e used. This messge is displyed when the mchine is retrieving previously sved pttern while in Emroidery Edit mode. This messge ppers when something is wrong with the sensor unit of the mchine. Contct your nerest uthorized retiler. This messge ppers when the time/dte is not set. Set time/dte. (see pge B-18) This messge is displyed when the oin thred is running out. This messge is displyed when the oin is eing wound, nd the motor locks ecuse the thred is tngled, etc. This messge ppers efore emroidery unit moves. This messge ppers when you touch the point closer thn 2 cm from the needle drop point with the sensor pen in the sensor function. (see pge B-57) This messge ppers when the specified pttern position extends out of the pttern re. Specify more centered position of the emroidery frme. (see pge B-60) This messge is displyed when the memory is full nd pttern must e deleted. This messge is displyed when the motor locks due to tngled thred or for other resons relted to thred delivery. This messge ppers when the mchine is in the shutoff support mode. Turn off the mchine once to strt the mchine gin. (see pge B-25) This messge is displyed when it seems tht the upper thred hs not een threded correctly. This messge is displyed when you ttempt to select pttern fter the USB medi in which the pttern is sved hs een chnged. This messge is displyed when the needle plte cover is not ttched. This messge ppers if the file formt is incomptile with this mchine. Check the list of comptile file formts. (see pge E-44) Appendix A-11

176 ERROR MESSAGES Mrks Error Messges Cuse/Solution This file exceeds the dt cpcity nd cnnot e used. Use suitle size file. This function cnnot e used while in the sensor mode. This key does not operte when the needle is down. Rise the needle nd press the key gin. This USB medi cnnot e used. This USB medi is incomptile. Trnsmitting y USB Turn off the power nd replce the needle plte. USB medi error USB medi is not loded. Lod USB medi. Use the presser foot lifter utton to lower the presser foot. This messge is displyed when the file size exceeds the dt cpcity of the mchine. Confirm the file size nd formt. (see pge E-46) This messge ppers when the selected function is not ville with the sensor function. (see pge B-55) This messge is displyed when key on the LCD disply is touched while the needle is in the down position. This messge is displyed when you try to use incomptile medi. This messge is displyed when you try to use incomptile USB medi. For list of comptile USB medi, visit This messge is displyed while the USB medi is trnsmitting. This messge is displyed when the needle plte is removed with the mchine on or when the mchine is turned on nd Emroidery or Emroidery Edit mode is selected (see pge B-20). This messge is displyed when n error occurs with the USB medi. This messge is displyed when you try to recll or sve pttern while no USB medi is loded. This messge is displyed when utton, such s the Strt/Stop utton, is pushed while the presser foot is rised. A-12

177 SPECIFICATIONS SPECIFICATIONS Emroidery Mchine nd Accessories (Box 1 of 2) Emroidery Unit (Box 2 of 2) Item Dimensions of mchine Dimensions of ox Weight of mchine Weight of ox (for shipping) Emroidering speed Dimensions of emroidery unit Dimensions of mchine with emroidery unit ttched Dimensions of ox Weight of emroidery unit Weight of ox (for shipping) Totl Shipping Weight (Comintion of 2 oxes complete) Specifiction Approx cm (W) 33.5 cm (H) 28.4 cm (D) (pprox. 22-1/2 inches (W) 13-1/16 inches (H) 11-3/16 inches (D)) Approx cm (W) 55.0 cm (H) 37.7 cm (D) (pprox /16 inches (W) 21-5/8 inches (H) 14-13/16 inches (D)) Approx kg (pprox l) Approx kg (pprox l) 100 to 1050 stitches per minute Approx cm (W) 13.0 cm (H) 46.4 cm (D) (pprox. 21-7/16 inches (W) 5-1/8 inches (H) 18-1/4 inches (D)) Approx cm (W) 33.5 cm (H) 46.4 cm (D) (pprox. 32-1/16 inches (W) 13-1/16 inches (H) 18-1/4 inches (D)) Approx cm (W) 55.0 cm (H) 18.8 cm (D) (pprox /16 inches (W) 21-11/16 inches (H) 7-7/16 inches (D)) Approx. 3.9 kg (pprox. 8.5 l) Approx. 6.0 kg (pprox l) Approx kg (pprox l) A 1 Mintennce nd Trouleshooting * Plese e wre tht some specifictions my chnge without notice. Appendix A-13

178 UPGRADING YOUR MACHINE S SOFTWARE UPGRADING YOUR MACHINE S SOFTWARE You cn use USB medi or computer to upgrde softwre for your mchine. When n upgrde progrm is ville on plese downlod the files following the instructions on the wesite nd steps elow. When using USB medi to upgrde the softwre, check tht no dt other thn the upgrde file is sved on the USB medi eing used efore strting to upgrde. Upgrde Procedure Using USB Medi While pressing the Automtic Threding utton, turn the min power to ON. The following screen will pper on the LCD. The ccess lmp will egin linking fter inserting USB medi, nd it will tke out 5 to 6 seconds to recognize the medi. (Time will differ depending on the USB medi). d Press. Press. c Insert the USB medi into the USB port for medi/mouse on the mchine. The medi device should only contin the upgrde file. The upgrde file is loded. If n error occurs, red text error messge will pper. When the instlltion is performed successfully, following messge will pper. USB port for medi/mouse USB medi e Remove the USB medi, nd turn the mchine off nd on gin. A-14

179 UPGRADING YOUR MACHINE S SOFTWARE Upgrde Procedure Using Computer While pressing the Automtic Threding utton, turn the min power to ON. A 1 The following screen will pper on the LCD. Press. e When the messge disppers, press. Mintennce nd Trouleshooting c Plug the USB cle connector into the corresponding USB ports for the computer nd for the mchine. Removle Disk will pper in Computer (My computer). d Copy the upgrde file to Removle Disk. The upgrde file is loded. If n error occurs, red text error messge will pper. When the instlltion is performed successfully, following messge will pper. The following messge will pper. f Unplug the USB cle, nd turn the mchine off nd on gin. Appendix A-15

Operation Manual. Embroidery Machine. Product Code: 882-D80/D82

Operation Manual. Embroidery Machine. Product Code: 882-D80/D82 Opertion Mnul Emroidery Mchine Product Code: 882-D80/D82 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. TRADEMARKS IMPORTANT: READ

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purchsing this mchine. Before using this mchine, crefully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the correct opertion of the vrious functions.

More information

Operation Manual. Product Code 885-V55. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX

Operation Manual. Product Code 885-V55. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX Computerized Emroidery Mchine Opertion Mnul Product Code 885-V55 GETTING READY EMBROIDERY APPENDIX Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for

More information

Operation Manual Embroidery

Operation Manual Embroidery Opertion Mnul Emroidery Emroidery nd Sewing Mchine Product Code: 882-W30 Be sure to red this mnul efore using the mchine. We recommend tht you keep this document nery for future reference. HOW TO USE

More information

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-C50

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-C50 Opertion Mnul Emroidery nd Sewing Mchine Product Code: 882-C50 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. TRADEMARKS IMPORTANT:

More information

Operation Manual Sewing Machine

Operation Manual Sewing Machine Opertion Mnul Sewing Mchine Product Code: 888-V64/V65/V66/V67 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this document efore using the mchine. We recommend tht you

More information

Basic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS...

Basic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS... Chpter 5 Bsic Emroidery BEFORE EMBROIDERING... 196 Emroidery Step y Step...196 Attching Emroidery Foot W+ with LED pointer...197 Attching the Emroidery Unit...197 Aout the Emroidery Unit... 197 Removing

More information

Operation Manual. Addendum. Embroidery Machine. Product Code: 884-T13

Operation Manual. Addendum. Embroidery Machine. Product Code: 884-T13 Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT

More information

ABOUT THIS MANUAL ABOUT THIS MANUAL

ABOUT THIS MANUAL ABOUT THIS MANUAL ABOUT THIS MANUAL ABOUT THIS MANUAL This mnul provides detils on IQ Designer, which is ville with the upgrde. Mke sure tht the mchine hs een upgrded to the most recent version. When you find this icon

More information

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-C40/C42

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-C40/C42 Opertion Mnul Emroidery nd Sewing Mchine Product Code: 882-C40/C42 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. TRADEMARKS IMPORTANT:

More information

Operation Manual. Sewing Machine KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX

Operation Manual. Sewing Machine KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Sewing Mchine Product Code: 885-V58/V59/V68/V69 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this document before using the mchine. We recommend tht

More information

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-W20/W22

Operation Manual. Embroidery and Sewing Machine. Product Code: 882-W20/W22 Opertion Mnul Emroidery nd Sewing Mchine Product Code: 882-W20/W22 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. INTRODUCTION

More information

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning

More information

Fitting & User Instructions

Fitting & User Instructions Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising

More information

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed; Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with

More information

Math Circles Finite Automata Question Sheet 3 (Solutions)

Math Circles Finite Automata Question Sheet 3 (Solutions) Mth Circles Finite Automt Question Sheet 3 (Solutions) Nickols Rollick nrollick@uwterloo.c Novemer 2, 28 Note: These solutions my give you the nswers to ll the prolems, ut they usully won t tell you how

More information

English Printed in Taiwan XG

English Printed in Taiwan XG COVER 1-4 C M Y K English Printed in Tiwn XG0091-001 Congrtultions on choosing our product! Thnk you very much for purchsing our product. To otin the est performnce from this device nd to ensure sfe nd

More information

* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions

* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions *23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service

More information

FOMA M702iG Manual for Data Communication

FOMA M702iG Manual for Data Communication FOMA M702iG Mnul for Dt Communiction Dt Communictions... 1 Before Using... 2 Prepring for Dt Communiction... 3 Instlling the Communiction Configurtion Files (Drivers)... 4 Connecting the FOMA Hndset nd

More information

TUR DOORS SHOWER DOORS

TUR DOORS SHOWER DOORS TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ

More information

FOR DEVICES SOLD PRIOR TO

FOR DEVICES SOLD PRIOR TO 23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions

More information

CAL. NX15 DUO-DISPLAY QUARTZ

CAL. NX15 DUO-DISPLAY QUARTZ L. NX15 UO-ISPLY QURTZ l nlogue time disply l igitl time nd clendr l hronogrph l Tchymeter l t recll function l lrm l Illuminting light (Electroluminescent pnel) ENGLISH Illuminting light (TIME/LENR mode

More information

001CK CK0012 FR-001CK0013 FR EN English

001CK CK0012 FR-001CK0013 FR EN English AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion

More information

Canopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:

Canopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev: Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result

More information

Operation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX

Operation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX Computerized Emroidery Mhine Opertion Mnul Produt Code 885-V51 GETTING READY EMBROIDERY APPENDIX Plese visit us t http://solutions.rother.om where you n get produt support nd nswers to frequently sked

More information

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type) ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In

More information

* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions

* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions *23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS

More information

UPTOWN CANOPY FRAME T/F/Q

UPTOWN CANOPY FRAME T/F/Q UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly

More information

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless

More information

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v mc profile Mcintosh 10.5-10.10 Configurtion Guide Adoe Photoshop CS/CC Swgrss Virtuoso SG400/SG800 v20150427 Configurtion Guide - Photoshop CS/CC Swgrss SG400/800 Before proceeding, ensure the correct

More information

RemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA

RemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA SEND SEND CLL CLL L " LCD COLOR MONITOR 4-29- COLOR CCD CMER 4-29- 486G VT 2 GX CUSTOMER UNIT CLL -8-999-6 LISTINGS ND PPROVLS CLSSIFIED TO UL 4R SFETY OF INFORMTION TECHNOLOGY EQUIPMENT UL TESTED TO THE

More information

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation. Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts

More information

510 Series Color Jetprinter

510 Series Color Jetprinter 510 Series Color Jetprinter User s Guide for Windows Setup trouleshooting A checklist to find solutions to common setup prolems. Printer overview Lern out the printer prts nd the printer softwre. Printing

More information

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is

More information

Student Book SERIES. Fractions. Name

Student Book SERIES. Fractions. Name D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types

More information

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501. Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple

More information

How to remove BRNS/BRFS series from a PWB

How to remove BRNS/BRFS series from a PWB Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive

More information

670 Freestyle/Style Door with In-Line Panel

670 Freestyle/Style Door with In-Line Panel M 670 Freestyle/Style oor with In-Line Pnel Style Series Option Metl HK87 Slide MGNETIC PULL HNLE KIT with Mgnet Vinyl 083 JM E 989 MGNETIC OOR STOP N H900 PN HE SCREW C (CUH or MG) 781 HEER 716 HEER /

More information

Multi-Point Astragal Prehanger Installation Instructions

Multi-Point Astragal Prehanger Installation Instructions Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best

More information

MAIN PARTS

MAIN PARTS MAIN PARTS 7 8 9 10 11 12 13 1 2 3 17 4 5 6 01 02 03 04 05 12 23 34 45 56 13 24 35 46 57 14 25 36 47 58 15 16 26 27 37 38 48 49 59 60 06 07 08 09 10 17 18 28 29 39 40 50 51 61 62 19 30 41 52 63 20 21 31

More information

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You

More information

NORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS

NORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS 40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy

More information

Digital Design. Sequential Logic Design -- Controllers. Copyright 2007 Frank Vahid

Digital Design. Sequential Logic Design -- Controllers. Copyright 2007 Frank Vahid Digitl Design Sequentil Logic Design -- Controllers Slides to ccompny the tetook Digitl Design, First Edition, y, John Wiley nd Sons Pulishers, 27. http://www.ddvhid.com Copyright 27 Instructors of courses

More information

Please Do Not Return Product to Store!

Please Do Not Return Product to Store! Instlltion Guide for ndersen Luminire Retrctble Insect Screen Door with Slidewy Insect Screen System Designed for 6 wide by 80 tll single hinged doors with suitble mounting surfce. For instlltion help

More information

General Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House

General Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =

More information

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition

More information

Seven Sisters. Visit for video tutorials

Seven Sisters. Visit   for video tutorials Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15 GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Produt Code: 888-V12/V13/V15 Be sure to red this doument efore using the mhine. We reommend tht you keep this

More information

Computerized Embroidery and Sewing Machine. Operation Manual

Computerized Embroidery and Sewing Machine. Operation Manual GETTING READY SEWING BASICS 2 UTILITY STITCHES 3 EMBROIDERY 4 APPENDIX 5 Computerized Emroidery nd Sewing Mhine Opertion Mnul Produt Code: 885-U0/U04 Be sure to red this doument efore using the mhine.

More information

To register your machine warranty and receive Baby Lock product updates and offers, go to If you have questions with

To register your machine warranty and receive Baby Lock product updates and offers, go to   If you have questions with To register your machine warranty and receive Baby Lock product updates and offers, go to www.babylock.com/profile. If you have questions with registration, visit your Authorized Baby Lock Retailer. CONTENTS

More information

ARK CHEVRON INSTALLATION GUIDE

ARK CHEVRON INSTALLATION GUIDE ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu

More information

Operation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

Operation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX GETTING READY Red efore use. SEWING BASICS UTILITY STITCHES Red when dditionl informtion is required. APPENDIX Computerized Sewing Mhine Produt Code: 885-U24 Opertion Mnul IMPORTANT SAFETY INSTRUCTIONS

More information

CONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE

CONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE CONGRATULATIONS ON CHOOSING OUR MACHINE Your mhine is the most dvned omputerized household sewing mhine. To fully enjoy ll the fetures inorported, we suggest tht you study the mnul. PLEASE READ BEFORE

More information

INSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS.

INSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS. INSTALLATION & OPERATION INSTRUCTIONS FOR LEVER HANDLE LOCKSETS 999-00333E_EN FOR BRINKS HOME SECURITY INTERIOR LOCKING & NON-LOCKING LEVER HANDLE LOCKSETS. FITS DOORS 1-3/8" (35 mm) TO 1-3/4" (45 mm)

More information

SERVICE MANUAL 9940/20/10

SERVICE MANUAL 9940/20/10 9940/0/0 9/0/00 Tle of ontents REMOVING THE EXTERIOR PARTS... A. Light Cover... B. Bse... C. Top Cover (Flp)... 4 D. Hinge Cover... 4 E. Thred Tension Cover... 4 F. Side Enlosure... 5 G. Hndle nd Unit

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Operation Manual Sewing Machine

Operation Manual Sewing Machine Opertion Mnul Sewing Mhine Produt Code: 888-S33/S36 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this

More information

GENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES

GENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14 GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this doument nery for future referene. Opertion Mnul Computerized Sewing

More information

Operation Manual. Sewing Machine KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX

Operation Manual. Sewing Machine KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Operation Manual Sewing Machine Product Code: 885-V58/V59/V68/V69 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to read this document before using the machine. We recommend

More information

Sequential Logic (2) Synchronous vs Asynchronous Sequential Circuit. Clock Signal. Synchronous Sequential Circuits. FSM Overview 9/10/12

Sequential Logic (2) Synchronous vs Asynchronous Sequential Circuit. Clock Signal. Synchronous Sequential Circuits. FSM Overview 9/10/12 9//2 Sequentil (2) ENGG5 st Semester, 22 Dr. Hden So Deprtment of Electricl nd Electronic Engineering http://www.eee.hku.hk/~engg5 Snchronous vs Asnchronous Sequentil Circuit This Course snchronous Sequentil

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System SE-BrotherE_sgml.ook Pge Mondy, June 30, 003 3:44 PM GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX CPS5XV[Y Esy Thred Cssette System Opertion Mnul Inluded Aessories After opening the

More information

Series Door with In-Line Panel (GIH / AHD)

Series Door with In-Line Panel (GIH / AHD) 600 7000 Series oor with In-Line Pnel (GIH / H) H900 P H 083 JM C 781 HR 716 HR / SILL ISRT H900 P H F H170 MGTIC STRIP H900 P H 083 JM H5195 STTIG LOCK VRTICL VIYL GLZIG X Y Z HORIZOTL VIYL GLZIG FRM

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using this mhine, si sfety preutions should lwys e tken, inluding the following: Red ll instrutions efore using. DANGER - To redue the risk of eletri shok: 1. The mhine

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SR24A-MF Prmeterisle rotry ctutor for ll vlves Nominl torque 20 Nm Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10 V Vrile echnicl dt Electricl

More information

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7 RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø

More information

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA GEI-6871 9E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53 GE Protection nd Control 205 Gret Vlley Prkwy Mlvern, PA 19355-1337 2 for Semi-flush Mounting (Front View) Connected Rely with Flnge

More information

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE

More information

Sewing and Embroidery Machine

Sewing and Embroidery Machine Mid-Level Sewing and Embroidery Machine Discover new paths to creativity with the Baby Lock Aventura II sewing and embroidery machine. Powered by Baby Lock IQ TechnologyTM, the Aventura II makes every

More information

Frami transport hook Art. n models onward

Frami transport hook Art. n models onward 999281902-02/2015 en-g The Formwork Experts. Frmi trnsport hook rt. n 588494000 2009 models onwrd Originl Operting Instructions Plese retin for future reference Originl Operting Instructions Frmi trnsport

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet EVC24A-MF Prmeterisle gloe vlve ctutor for 2-wy nd 3-wy gloe vlves Actuting force 2500 N Nominl voltge AC/DC 24 V Control modulting DC (0)2...10 V Vrile Nominl stroke 40 mm Actuting time

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl

More information

Extremely small "footprint" and the highest circuit density available AK550. Front Wire Entry

Extremely small footprint and the highest circuit density available AK550. Front Wire Entry FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers

More information

Whole House Fan. WHF 1500, GF 1500, WHF 3000 Installation Instructions. Parts List * Required Tools:

Whole House Fan. WHF 1500, GF 1500, WHF 3000 Installation Instructions. Parts List * Required Tools: Whole House Fn WHF 1500, GF 1500, WHF 3000 Instlltion Instructions Prts List * Quntity 1 Fn Assemly w/ Set Screw (WHF 3000 Shown) (1) 1 2 Insulted Ducting (1) 3 Dmper Box (1) 4 Fn Grill (1) 5 HushMount

More information

IMPORTANT! Please record the serial number of this unit in the space below.

IMPORTANT! Please record the serial number of this unit in the space below. CC-5 Nturl Sound Mini Component System Active Servo Processing Speker System 20 FM/10 AM Sttion Automtic Storing Cpility Doule Cssette Tpe Deck with Automtic Reverse Function Tpe nd Continuous Plyck Cpility

More information

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer.

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Enclosed Accessories After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Accessories The following items should also be enclosed

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Mini Mario & Friends: amiibo Challenge

Mini Mario & Friends: amiibo Challenge Mrio & Friends: Chllenge 1 Importnt Informtion Bsic Informtion 2 Introduct ion 3 About Gme 4 Gettin g Strted 5 Sving nd Deleting Dt How to Ply 6 Level Mp 7 Plying Levels 8 Mi ni Toy Abilities 9 Objects/

More information

Products no longer available

Products no longer available echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck

More information

Student Book SERIES. Patterns and Algebra. Name

Student Book SERIES. Patterns and Algebra. Name E Student Book 3 + 7 5 + 5 Nme Contents Series E Topic Ptterns nd functions (pp. ) identifying nd creting ptterns skip counting completing nd descriing ptterns predicting repeting ptterns predicting growing

More information

Innov-ís 4000D/4000 PREMIUM PACKAGE

Innov-ís 4000D/4000 PREMIUM PACKAGE Innov-ís 4000D/4000 PREMIUM PACKAGE Version 3.0 Upgrade Kit Operation Manual Before using this upgrade kit, be sure to read this Operation Manual for information on its correct use. CONTENTS Before You

More information

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer.

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Enclosed Accessories After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Accessories The following items should also be enclosed

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Operation Manual. Sewing Machine. Product Code: 888-X53/X54/X55/X56

Operation Manual. Sewing Machine. Product Code: 888-X53/X54/X55/X56 Operation Manual Sewing Machine Product Code: 888-X/X/X/X6 Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). IMPORTANT

More information

NORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS

NORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS 40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc

More information

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer.

After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Enclosed Accessories After opening the box, check that the following accessories are enclosed. If any item is missing or damaged, contact your retailer. Accessories te (For U.S.A. only) Foot controller:

More information

TP Series - Triple PV Top of Pole Solar LED Lighting System

TP Series - Triple PV Top of Pole Solar LED Lighting System TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion

More information

EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS

EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS INSTALLATION PARTS LIST BRITISH PATENT NO. 2470778 EPH MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 32886 (AFTER SALES)

More information

IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following:

IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric

More information

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive.

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive. Job Sheet 2 Vrible Speed Drive Opertion OBJECTIVE To instll nd operte Vrible Speed Drive. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. 1. On the Vrible Speed

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Operation Manual. Embroidery Machine Product Code:882-T51

Operation Manual. Embroidery Machine Product Code:882-T51 Operation Manual Embroidery Machine Product Code:882-T51 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference. Trademarks IMPORTANT:

More information

CAUTION- SAVE THESE INSTRUCTIONS This product is for household use, or equivalent.

CAUTION- SAVE THESE INSTRUCTIONS This product is for household use, or equivalent. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, dropped into water. Return this sewing machine to the nearest authorized

More information

WETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850

WETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850 WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or

More information

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure Sfety Rely Unit G9 CSM_G9_DS_E The G9 Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s

More information