Double thick tongue. Tongue Wire Stud Hole CT-930, CT-930CH, S4-10R-E

Transcription

1 Type S-R Seamless tubular barrel Beveled wire lead-in Tubular Ring Terminal, Non-Insulated Double thick tongue A. B.Cable Ties B L T W Inspection Window Min. Tensile Strength of Tubular Ring Terminals #8 #6 #4 # Tongue Wire Stud Hole Width Figure Dimensions (In.) Recommended Ctn. Range Size W L B T Installation Tool ** S8-0R-Q # S8-4R-Q /4" S8-56R-Q 8 AWG 5/6" S8-38R-Q 3/8" S6-0R-E # S6-4R-E /4" CT-700, AWG S6-56R-E 5/6" CT-720, S6-38R-E 3/8" CT-930, CT-930CH, S4-0R-E # CT-940CH, S4-4R-E /4" CT-200, AWG CT-2002, S4-56R-E 5/6" CT-293, S4-38R-E 3/8" CT S2-0R-X # S2-4R-X /4" S2-56R-X -2 5/6" AWG S2-38R-X 3/8" S2-2R-X /2" S/0-4R-X /4" S/0-56R-X /0 5/6" S/0-38R-X AWG 3/8" S/0-2R-X /2" S2/0-4R-X /4" S2/0-56R-X 5/6" S2/0-38R-X 2/0 3/8" AWG S2/0-76R-X 7/6" CT-720, 0 00 S2/0-2R-X /2" CT-930, 0 00 CT-930CH, S3/0-4R-5 /4" CT-940CH, 5 50 S3/0-56R-5 5/6" CT-200, /0 CT-2002, S3/0-38R-5 3/8" AWG CT-980, S3/0-76R-5 7/6" CT-2980, 5 50 S3/0-2R-5 /2" CT-980CH, 5 50 CT-293, S4/0-56R-5 5/6" CT S4/0-38R-5 4/0 3/8" S4/0-76R-5 AWG 7/6" S4/0-2R-5 /2" S250-56R-5 5/6" S250-38R /8" S250-76R-5 kcmil 7/6" S250-2R-5 /2" **To order in bulk, replace -Q, -E, or -X in the part number with -T for a bulk package of 200 and replace -5 with -C for a bulk package of 00. For crimping tool information, see pages D.72, D.74, D2.29, D2.3 through D2.38. C. Wiring D. Terminals E. Labeling For service and technical support, call or visit D.7

2 A. CONTOUR CRIMP Controlled Cycle Tools B.Cable Ties Specifically designed for the installation of PAN-TERM terminals, disconnects and splices Low handle effort increases productivity Superior crimp performance Reliable backed by a two year warranty CT-525 CT-550 CT-525 CT-550 Crimps PANDUIT #26 #22 AWG insulated terminals and splices, #22 #0 AWG fully insulated disconnects and insulated parallel splices. Crimps PANDUIT #22 #4 AWG barrel insulated disconnects. Crimps most PAN-TERM #22 #0 AWG nylon and vinyl insulated terminals, splices and disconnects. The CT-550 has the red/blue pocket closest to the pivot which provides a reduced crimp effort for those who make red/blue terminations. C. Wiring CT-55 CT-55 Crimps most PAN-TERM #22 #0 AWG nylon and vinyl insulated terminals, splices and disconnects. The CT-55 has the yellow pocket closest to the pivot which provides a reduced crimp effort for those who make yellow terminations. CT-570 Crimps most PAN-TERM #22 #0 AWG and.5-6.0mm non-insulated terminals and disconnects. Crimps PANDUIT #22 #0 AWG and.5-6.0mm non-insulated splices, and #0 AWG compression lugs. CT-570 CT-700 Crimps PANDUIT #8 #2 AWG non-insulated tubular terminals (S series), #8 # AWG copper lugs and splices, #6 #4 AWG aluminum lugs and splices and CTAPF copper taps for #4 #3 AWG. Includes 5 position, color coded rotating die. CT- 700 CT-70 Crimps PANDUIT #0 #2 AWG non-insulated large gauge ring terminal (P series). Crimps #8 # AWG copper lugs and splices, and #6 #4 AWG aluminum lugs and splices, and #4 #3 AWG CTAPF copper taps. Includes 5 position rotating die. CT-04 Crimps PANDUIT #22 #4 AWG loose piece DISCO-LOK disconnects. D. Terminals CT-70 CT-05 Crimps PANDUIT #22 #4 AWG loose piece SUPRA-GRIP disconnects. For battery powered crimping tools, see Compression Connector Tools Selection Guide on pages D2.26 D2.28. CT-04 E. Labeling CT-05 Controlled Cycle Crimping Tools CT-300- Crimps PANDUIT #22 #4 AWG fully insulated right angle disconnects. (DNFR-FIB series). CT-30 Crimps PANDUIT #22 #0 AWG heat shrink insulated terminals, disconnects and splices. D.72 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.

3 A. B.Cable Ties C. Wiring Pneumatic Crimping Tool Quickly crimps a variety of loose piece terminals in a variety of wire sizes for medium volume production Versatile interchangeable crimping heads let you switch terminal types quickly to meet changing production requirements. This tool, when used with only four crimp heads, can crimp a full range of #26 thru #0 AWG insulated and non-insulated terminal products CT-600 Portable the small size, ease of bench mounting and quick pneumatic connection allow the tool to be moved from one work station to another or to the work itself Pneumatic tool, 6 ft. air hose and carrying case. Does not include crimping heads (ordered separately). CT-500CH Crimping head for most #22 4 insulated terminals, splices and disconnects. CT-520CH Crimping head for most #22 4 insulated butted seam disconnects and #26 22 insulated terminals. CT-550CH Crimping head for most #22 0 insulated terminals and splices. CT-570CH Crimping head for #22 0 non-insulated terminals, splices and disconnects. PD-600 Positioning device (for bench mounting of CT-600). FPC-600 Foot actuator operating air pressure: psi.233 SCFM type of air: lubricated. Recommend using Norgren (Brand) #FLR filter lubricator regulator. For proper crimp head selection, see the Tooling Selection Guide for PANDUIT Terminals, Splices and Disconnects on pages D.76 D.78, in this catalog. D. Terminals Die Type, Manual, Crimping Tool High quality, durable tool construction provides long term dependability Develops 6 tons of crimping force, crimps copper compression lugs and splices up to 500 kcmil Provides UL Listed and CSA Certified connections on PANDUIT copper and aluminum lugs and splices and insulated terminals Cushioned grips prevent hands from slipping on tool and reduces fatigue Uses single retention screw for fast and easy die change-over Available with or without controlled cycle feature to meet specific applications E. Labeling CT-720 Manual crimping tool for UL Listed or Recognized and CSA Certified terminations of PANDUIT Pan-Lug copper compression lugs and splices for #8 AWG 500 kcmil copper code conductor and aluminum compression lugs and splices for #6 AWG 350 kcmil copper and aluminum code conductors. Provides UL Listed terminations of PANDUIT Pan-Term #8 #2 AWG vinyl insulated terminals. Color coded CD-720 crimping dies, carrying/storage case and controlled cycle mechanism must be purchased separately. Output: 6 tons Weight: 7.7 lbs. Length: 26" Handle span: 58" (open), 2.5" (closed) Warranty: 90 days CC-720 Optional controlled cycle mechanism only. Total weight of tool with CC-720 is 8.25 lbs. C-720 carrying case for CT-720 crimping tool. For battery powered crimping tools, see Compression Connector Tools Selection Guide on pages D2.26 D2.28. D.74 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.

4 Die Type, Manual, Crimping Tool High quality, durable tool construction provides long term dependability Develops 6 tons of crimping force, crimps copper compression lugs and splices up to 500 kcmil Provides UL Listed and CSA Certified connections on PANDUIT copper and aluminum lugs and splices and insulated terminals Cushioned grips prevent hands from slipping on tool and reduce fatigue Uses single retention screw for fast and easy die change-over Embosses die index number on connector barrels to provide post Available with or without controlled cycle feature to meet specific applications A. B.Cable Ties CT-720 Manual crimping tool for UL Listed or Recognized and CSA Certified terminations of PANDUIT PAN-LUG copper compression lugs and splices for #8 AWG 500 kcmil copper code conductor and aluminum compression lugs and splices for #6 AWG 350 kcmil copper and aluminum code conductors. Provides UL Listed terminations of PANDUIT PAN-TERM #8 #2 AWG vinyl insulated terminals. Color coded CD-720 crimping dies, carrying/storage case and controlled cycle mechanism must be purchased separately. C. Wiring Output: 6 tons Weight: 7.7 lbs. Length: 26" Handle span: 58" (open), 2.5" (closed) Warranty: 90 days CC-720 Optional controlled cycle mechanism only. Total weight of tool with CC-720 is 8.25 lbs. C-720 carrying case for CT-720 crimping tool. CD-720 Crimping Dies Color coded for easy matching to color coding marked on connectors except CD-720PV8-2 Copper Conductor Size Used to Install PANDUIT Compression Lug & Splice Sizes Copper Die Color & Die No. CD-720- #8 #2 AWG Red P2, Blue P24, Gray P29, Brown P33 CD # 3/0 AWG Green P37, Pink P42, Black P45, Orange P50 CD /0 AWG 250 kcmil Part number permanently marked on crimping die for easy identification Provides 5-sided crimp results in terminations with premium electrical and mechanical performance Purple P54, Yellow P62 See pages D2.48 D2.86 for connector and tool selection information. Aluminum Conductor Size Aluminum Die Color & Die No. #6 AWG Gray P29 #4 /0 AWG Green P37, Pink P42, Gold P45, Tan P50 2/0 3/0 AWG Olive P54, Ruby P62 CD kcmil White P66 4/0 AWG White P66 CD kcmil Red P7 250 kcmil Red P7 CD kcmil Blue P kcmil Blue P76 CD kcmil Brown P kcmil Brown P87 CD-720PV8-2 #8 #2 AWG, vinyl insulated PAN-TERM Terminals Red, Blue, Yellow D. Terminals E. Labeling For service and technical support, call or visit D2.29

5 Die Type, Manual Hydraulic, 4 Ton, Crimping Tool A. Develops 4 tons of crimping force, crimps copper compression lugs and splices up to 750 kcmil Two-stage rapid advance hydraulic system minimizes number of pumps required to complete a crimp, saves time High quality, durable tool construction provides long-term dependability Cushioned grip prevents hands from slipping on tool, reduces fatigue PAN-LUG copper and aluminum lugs and splices and copper taps Open C-Head design allows easy loading of crimping dies and connectors, saves time Rubber boot on crimp head provides abrasion protection Audible pop-off valve indicates crimp completion Crimp head rotates 80 degrees, provides versatility for use in restricted spaces B.Cable Ties CT-930 Terminates PANDUIT PAN-LUG Compression : C. Wiring Copper compression lugs and splices for #8 AWG 750 kcmil code conductor Copper compression lugs and splices for #8 AWG 600 kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 4/0 AWG code conductor Copper compression HTCT taps for #4 AWG 250 kcmil code conductor, #4 4/0 AWG flex conductor Aluminum compression lugs and splices for #6 AWG 600 kcmil code conductor Aluminum compression HTAPs for #4 AWG 500 kcmil code conductor Output: 4 tons Jaw opening:.65" Weight: 6.5 lbs. Length: 25" Handle span: 7 /2" (open), 6" (closed) Warranty: 5 years CT-930 includes: Plastic tool case with die storage D. Terminals Uses CD-920 and CD-930 color coded crimping dies. Dies must be purchased separately, see page D2.42. CG-920 crimp force measurement gauge available, sold separately see page D2.47. E. Labeling For service and technical support, call or visit D2.3

6 A. Die Type, Battery Powered Hydraulic, 6 Ton, Crimping Tool with Closed Head B.Cable Ties C. Wiring Battery powered, provides fingertip operation Self-contained unit, completely portable Lightweight and ergonomically balanced for easy operation without fatigue Develops 6 tons of crimping force, crimps copper compression lugs and splices up to 500 kcmil PAN-LUG copper lugs, splices and taps Audible pop-off valve indicates crimp completion provided with two, NiCd rechargeable batteries and battery charger to allow for continuous operation High productivity, up to 80 crimps on 500 kcmil copper lugs and splices on a single battery charge Six to eight second crimp cycle time provides quick terminations, saves time Battery charger charges expended batteries completely in 25 minutes Battery charger includes battery reconditioner feature which prevents battery memory build-up and provides over,000 battery recharge cycles resulting in long life Crimp head rotates 80 degrees to provide versatility for use in restricted spaces CT-200 Terminates PANDUIT PAN-LUG Compression : Copper compression lugs and splices for #8 AWG 500 kcmil code conductor Copper compression lugs for #8 AWG 350 kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 #2 AWG code conductor Aluminum compression lugs and splices for #6 AWG 300 kcmil code conductor (not UL or CSA) Aluminum compression HTAPs for #4 4/0 AWG code conductor (not UL or CSA) D. Terminals Output: 6 tons Jaw opening:.8" Weight: 8.5 lbs. with battery Length: 3" Height: 2" Width: 3" Warranty: 3 years on tool, 5 years on batteries CT-200 includes: Two CT-NLBC25, 4.4 VDC rechargeable batteries (non-led) One CT-CHR25 battery charger One shoulder strap Plastic tool case with storage for batteries, charger, shoulder strap and crimping dies incorporates D3 die pocket (included with tool) E. Labeling Uses color coded CD-200 crimping dies. Dies must be purchased separately, see page D2.34. For battery charger and battery accessories, see page D2.47. D2.32 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.

7 Die Type, Battery Powered Hydraulic, 6 Ton, Crimping Tool with Open C-Head A. Battery powered, provides fingertip operation Self-contained unit, completely portable Lightweight and ergonomically balanced for easy operation without fatigue Develops 6 tons of crimping force, crimps copper compression lugs and splices up to 500 kcmil PAN-LUG copper lugs, splices and taps Open C-Head design allows easy loading of crimping dies and connectors, saves time Rubber boot on crimp head provides abrasion protection Audible pop-off valve indicates crimp completion provided with two, NiCd rechargeable batteries and battery charger to allow for continuous operation High productivity, up to 80 crimps on 500 kcmil copper lugs and splices on a single battery charge Six to eight second crimp cycle time provides quick terminations, saves time Battery charger charges expended batteries completely in 25 minutes Batteries include LED battery charge indicators for visual indication of current battery charge Battery charger includes battery reconditioner feature which prevents battery memory build-up and provides over,000 battery recharge cycles resulting in long life Crimp head rotates 80 degrees to provide versatility for use in restricted spaces B.Cable Ties C. Wiring CT-2002 Terminates PANDUIT PAN-LUG Compression : Copper compression lugs and splices for #8 AWG 500 kcmil code conductor Copper compression lugs for #8 AWG 350 kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 #2 AWG code conductor Aluminum compression lugs and splices for #6 AWG 300 kcmil code conductor (not UL or CSA) Aluminum compression HTAPs for #4 4/0 AWG code conductor (not UL or CSA) Output: 6 tons Jaw opening:.95" Weight: 9.0 lbs. with battery Length: 3" Height: 2" Width: 3" Warranty: 5 years tool, year on batteries D. Terminals CT-2002 includes: Two CT-BC25, 4.4 VDC rechargeable batteries with LED display One CT-CHR25 battery charger One shoulder strap Plastic tool case with storage for batteries, shoulder strap and crimping dies incorporates D3 die pocket (included with tool) E. Labeling Uses color coded CD-200 crimping dies. Dies must be purchased separately, see page D2.34. For battery charger and battery accessories, see page D2.47. For service and technical support, call or visit D2.33

8 A. B.Cable Ties CD-200 and CDM-200 Crimping Dies Color coded to provide easy matching to color coding marked on connectors Part number permanently marked on crimping die for easy identification Provides circumferential crimp results in terminations with premium electrical and mechanical performance C. Wiring D. Terminals E. Labeling CD-200 CDM-200 Used to Install PANDUIT Tap s Copper Tap Die Color & Die No. Aluminum Tap Single Crimp Dies CD CTAPF0-6-C Red P2 CD CTAPF8-2-C Blue P24 CD CTAPF6-2-C Gray P29 CD CTAPF4-2-C Brown P33 CD-200- CTAPF3-2-C Green P37 CD-200-/0 CTAPF2-2-C Pink P42 CD-200-2/0 CTAPF-2-C Black P45 CD-200-3/0 CTAPF/0-2-L Orange P50 HTAP2-8-L CD-200-4/0 CTAPF2/0-2-Q Purple P54 CD CTAPF3/0-2-Q Yellow P62 CD-200-BG CD-200-C Used to Install PANDUIT Compression Lug & Splice Sizes Copper Code Aluminum Code Conductor Copper Conductor Aluminum Size Die Color & Die No. Size Die Color & Die No. CD #8 AWG Red P2 CD #6 AWG Blue P24 CD #4 AWG STR #3 AWG STR #2 AWG SOL CTAP4-4-L to CTAP4-8-L CTAP2-4-Q to CTAP2-2-X PBG PC CD-200-O Green PO HTAP--Q to HTAP2/0--Q Multi-Crimp Dies CDM CTAPF4-2-C Brown P33M CDM-200- CTAPF3-2-C Green P37M CDM-200-/0 CTAPF2-2-C Pink P42M CDM-200-2/0 CTAPF-2-C Black P45M CDM-200-3/0 CTAPF/0-2-L Orange P50M See pages D2.48 D2.86 for connector and tool selection information. Gray P29 #6 AWG Gray P29 CD #2 AWG Brown P33 CD-200- # AWG Green P37 #4 AWG Green P37 CD-200-/0 /0 AWG Pink P42 #2 AWG Pink P42 CD-200-2/0 2/0 AWG Black P45 # AWG Gold P45 CD-200-3/0 3/0 AWG Orange P50 /0 AWG Tan P50 CD-200-4/0 4/0 AWG Purple P54 2/0 AWG Olive P54 CD kcmil Yellow P62 3/0 AWG Ruby P62 CD kcmil White P66 4/0 AWG White P66 CD kcmil Red P7 250 kcmil Red P7 CD kcmil Blue P kcmil Blue P76 CD kcmil Brown P87 D2.34 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.

9 Die Type, Battery Powered Hydraulic, 2 Ton, Crimping Tool Battery powered, provides fingertip operation Self-contained unit, completely portable Develops 2 tons of crimping force, crimps copper compression lugs and splices up to 750 kcmil Two stage rapid advance hydraulic system minimizes cycle time PAN-LUG copper and aluminum lugs and splices and copper taps Open C-Head design allows easy loading of crimping dies and connectors, saves time Rubber boot on crimp head provides abrasion protection Ram automatically retracts when crimp cycle is complete provided with two, high capacity 2 VDC rechargeable nickel-metal hydride batteries to provide for continuous operation and eliminate memory build-up, one hour charge time CT-293 Eight second crimp cycle time provides quick terminations, saves time Uses industry standard Makita* batteries and charger, industry proven reliability easy to obtain from local retail sources Crimp head rotates 360 degrees to provide versatility for use in restricted spaces Terminates PANDUIT PAN-LUG Compression : Copper compression lugs and splices for #8 AWG 750 kcmil code conductor Copper compression lugs and splices for #8 AWG 600 kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 4/0 AWG code conductor Copper compression HTCT taps for #4 AWG 250 kcmil code conductor, #4 4/0 AWG flex conductor Aluminum compression lugs and splices for #6 AWG 600 kcmil code conductor Aluminum compression HTAPs for #4 AWG 500 kcmil code conductor Output: 2 tons Jaw opening:.65" Weight: 5.2 lbs with battery Length: 5 5/8" Height: 2" Width: 3 3/6" Warranty: 3 years CT-293 includes: Two 2 VDC, rechargeable NiMH batteries One battery charger tool case with storage for batteries, charger and crimping dies Uses CD-920 and CD-930 color coded crimping dies. Dies must be purchased separately, see page D2.42. CG-920 crimp force measurement gauge available, sold separately, see page D2.47. *Makita is a registered trademark of Makita Corporation in the United States. A. B.Cable Ties C. Wiring D. Terminals E. Labeling For service and technical support, call or visit D2.35

10 A. Die Type, Battery Powered Hydraulic, 5 Ton, Crimping Tool B.Cable Ties C. Wiring Battery powered, provides fingertip operation Self-contained unit, completely portable Develops 5 tons of crimping force, crimps copper compression lugs and splices up to,000 kcmil PAN-LUG copper and aluminum lugs and splices and copper taps Flip-top crimp head design allows easy loading of crimping dies and connectors, saves time Rubber boot on crimp head provides abrasion protection Audible pop-off valve indicates crimp completion provided with two, NiCd rechargeable batteries and battery charger to allow for continuous operation High productivity, up to 35 crimps on 500 kcmil copper lugs and splices on a single battery charge Eight second crimp cycle time provides quick terminations, saves time Battery charger charges expended batteries completely in 25 minutes Batteries include LED battery charge indicators for visual indication of current battery charge Battery charger includes battery reconditioner feature which prevents battery memory build-up and provides over,000 battery recharge cycles resulting in long life Crimp head rotates 80 degrees to provide versatility for use in restricted spaces CT-2940 Terminates PANDUIT PAN-LUG Compression : D. Terminals Copper compression lugs and splices for #8 AWG 000 kcmil code conductor Copper compression lugs and splices for #8 AWG kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 4/0 AWG code conductor Copper compression HTCT taps for #4 AWG 000 kcmil code conductor and #4 AWG kcmil flex conductor Aluminum compression lugs and splices for #6 AWG 000 kcmil code conductor Aluminum compression HTAP taps for #4 AWG 500 kcmil code conductor Output: 5 tons Jaw opening: 2" Weight: lbs. with battery Length: 2" Height: 0.5" Width: 3.75" Warranty: 5 years tool, year on batteries E. Labeling CT-2940 includes: Two CT-BC25, 4.4 VDC rechargeable batteries with LED display One CT-CHR25 battery charger Shoulder strap Plastic case for storage of crimping dies Plastic tool case with storage for batteries, charger, shoulder strap and crimping die storage case Uses CD-920 and CD-930 color coded crimping dies with CD-940-DA die adapter. Uses CD-940 color coded crimping dies. Dies and die adapter must be purchased separately, see pages D2.42, D2.43. For battery charger and battery accessories, see page D2.47. D2.36 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.

11 Die Type, Remote Hydraulic, 4 Ton, Crimp Head A. Develops 4 tons of crimping force when used with 0,000 psi hydraulic pump and hose, crimps copper compression lugs and splices up to 750 kcmil Incorporates Parker type quick-connect fittings to ease installation and save time High quality, durable tool construction provides long-term dependability PAN-LUG copper and aluminum lugs and splices and copper taps Open C-Head design allows easy loading of crimping dies and connectors, saves time Embosses die index number on connector barrels for post Cast in handle allows crimp head to be mounted in a bench vice B.Cable Ties CT-930CH Terminates PANDUIT PAN-LUG Compression : Copper compression lugs and splices for #8 AWG 750 kcmil code conductor Copper compression lugs and splices for #8 AWG 600 kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 4/0 AWG code conductor Copper compression HTCT taps for #4 AWG 250 kcmil code conductor, #4 4/0 AWG flex conductor Aluminum compression lugs and splices for #6 AWG 600 kcmil code conductor Aluminum compression HTAPs for #4 AWG 500 kcmil code conductor C. Wiring Use with hydraulic systems developing 0,000 PSI of hydraulic pressure.* Output: 4 tons Jaw opening:.65" Weight: lbs. Length: 2 /4" Height: 5" Width: 3" Warranty: 5 years CT-930CH includes: tool case Supplied with female Parker type quick-connect fitting assembled to tool D. Terminals Uses CD-920 and CD-930 color coded crimping dies. Dies must be purchased separately, see page D2.42. *CT-90RCH remote control handle available, offering one hand operation of crimp head with PANDUIT CT-90HP hydraulic pump and CT-900HPH hose, sold separately, see page D2.39. CG-920 crimp force measurement gauge available, sold separately, see page D2.47. E. Labeling For service and technical support, call or visit D2.37

12 A. Die Type, Remote Hydraulic, 5 Ton, Crimp Head B.Cable Ties Develops 5 tons of crimping force when used with 0,000 psi hydraulic pump and hose, crimps copper compression lugs and splices up to,000 kcmil Incorporates Parker type quick-connect fittings to ease installation and save time High quality, durable tool construction provides long-term dependability PAN-LUG copper and aluminum lugs and splices and copper taps Open C-Head design allows easy loading of crimping dies and connectors, saves time Embosses die index number on connector barrels for post Cast in handle allows crimp head to be mounted in a bench vice CT-940CH Terminates PANDUIT PAN-LUG Compression : C. Wiring Copper compression lugs and splices for #8 AWG 000 kcmil code conductor Copper compression lugs and splices for #8 AWG kcmil flex conductor Copper compression CTAPF taps for #0 3/0 AWG code conductor Copper compression CTAP taps for #8 4/0 AWG code conductor Copper compression HTCT taps for #4 AWG 000 kcmil code conductor and #4 AWG kcmil flex conductor Aluminum compression lugs and splices for #6 AWG 000 kcmil code conductor Aluminum compression HTAP taps for #4 AWG 500 kcmil code conductor Use with hydraulic systems developing 0,000 PSI of hydraulic pressure.* Output: 5 tons Jaw opening: 2" Weight: 4.5 lbs. Length: 4.5" Height: 4." Width: 2.5" Warranty: 5 years D. Terminals CT-940CH includes: tool case Supplied with female Parker type quick-connect fitting assembled to tool Uses CD-920 and CD-930 color coded crimping dies with CD-940-DA die adapter. Uses color coded CD-940 crimping dies. Crimping dies and die adapter must be purchased separately, see pages D2.42 and D2.43. CG-940 crimp force measurement gauge available, sold separately, see page D2.47. *CT-90RCH remote control handle available, offering one hand operation of crimp head with PANDUIT CT-90HP hydraulic pump and CT-900HPH hose, sold separately, see page D2.39. E. Labeling D2.38 Order number of pieces required, in multiples of Standard Package Quantity. Prime items appear in BOLD.