Test Panel Information Sheet
|
|
- Nickolas O’Brien’
- 5 years ago
- Views:
Transcription
1 Test Panel Information Sheet ChemInstruments realizes that test panels change over time and these changes can cause questions concerning accuracy and repeatability in test results. Our dedication to detail and customer service enables us to make the most accurate and reliable panels on the market. We pride ourselves on the consistency of product that we have provided to the marketplace since ChemInstruments panels are manufactured in accordance with PSTC specification, Appendix B, section 2.6. They also meet other standard agency specifications such as ASTM D1000. This excerpt has been taken from the handbook published by the Pressure Sensitive Tape Council: Test Methods for Pressure Sensitive Adhesive Tapes 16 th Edition (2014) 2.6 Panel Specification A 50 x 125 x 1.2 mm (2 x 5 x in.) ± 10% panel of 304 stainless steel, free from burrs or sharp edges, having a bright annealed finish. The surface roughness shall be 0.05 ± microns (2 ± 1 micro inches) (Ra). The deviation in flatness in both the machine and the cross direction of the bright annealed surface shall be mm (0.005 in.) maximum. The surface shall be free of contaminants such as process oils, and visual defects such as blemishes and scratches Panels with other shapes and dimensions may be formed or cut from the same steel and finish when specified by an individual method. The surface, directional flatness, and edges should still meet the requirements of This paragraph will be cited with the necessary exceptions The bright annealed surface of any panels during storage or shipment should be covered with a residue free wrapper Panels showing or developing stains, discoloration, or scratches are not acceptable. ChemInstruments purchases stainless steel sheet metal in the 304 bright annealed form. Only one side of the material is finished to the specified surface described above. It is always delivered to our facility with a protective vinyl covering on the finished surface. This covering ensures the integrity of the surface during panel processing. The thickness specified for a panel must be 1.2 mm (0.048 ). This thickness is referenced by sheet metal standards as 18 gauge material. All stainless steel panels that ChemInstruments sells are made from 18 gauge material. 304 Stainless Steel is the most widely used variation of the 18/8 grades. The 18/8 references 18% Chromium/8% Nickel blended with Iron. It is a very versatile metal and has excellent Page 1 of 5
2 forming and welding characteristics. More importantly, it is a highly corrosion-resistant compound. This makes it particularly good to use in chemical or wet applications. It is made up of the following elements and ratios: Carbon 0.080% max Manganese 2.000% max Phosphorus 0.045% max Sulfur 0.030% max Silicone 0.750% max Chromium % Nickel % Nitrogen 0.100% max Iron Balance The surface finish specification dictates that the panel material must have a bright annealed finish. This type of finish is created at the steel mill by cold rolling, then annealing the material to the specified thickness. Annealing is the process of heating metal to a high temperature to work the metal, then allowing the metal to cool at its own rate. The annealing process is a procedure of running the metal through a series of rollers to draw down the metal to the required thickness or gauge. The final annealing process is done using highly polished rollers which impart a glossy finish resembling a cloudy mirror. Performing the annealing process in an oxygen-free environment eliminates any chance of oxidation or scaling during the processing of the material. 304 stainless steel having a bright annealed finish is typically referenced as a 2BA finish. This refers to a standard 2B finish performed in an inert furnace environment leaving the material bright or shiny. The 2B finish is created by the high polish finish on the final rollers used to perform the final gauge pass. Through pressure, the high-polish finish transfers to the material, making the surface very smooth. The surface smoothness of a panel is required to be / microns (2 +/- 1.0 micro inches) (Ra). Ra refers to the mathematical average roughness of a surface for a defined longitudinal period. Ra is expressed in micrometers (µm), otherwise known as microns. This measurement is performed using a device known as a profilometer. It is an extremely precise device which pulls a diamond tipped stylus across a small line of a surface to read the peaks and valleys of that surface. Upon moving the stylus across the surface, the internal computer of the profilometer then calculates the Ra value from the data collected. The panel flatness specification requires that a panel must not have a deviation in flatness more than mm (0.005 ) in either of the length or width directions. This is performed first by placing a panel onto a large block of precisely finished granite known as a surface plate. The top of the surface plate is highly polished to an extremely smooth and flat finish. The panel is observed resting on the surface plate visually noting any flatness variations. It is then pressed on all corners to note any rocking. Any visually noted rocking would describe a piece largely out of specification. More precise measurements are made using a height gauge to note flatness variations on random points of the panel surface. Page 2 of 5
3 Processing Before processing the panels, ChemInstruments ensures that the raw material used to make panels meets the above requirements. Below is a detailed description of how ChemInstruments processes all stainless steel panels. It is quite a long process, but we feel that all of these steps are required to create the most accurate and repeatable panels in the industry. 1. ChemInstruments has purchased the same specification of material from the same vendor since beginning business in We have not changed suppliers for the specific reason of consistency. This supplier is one of the larger metal suppliers in the business. Using the same supplier assures that the material is QC checked to the same standards every time we purchase material. This does not mean that they are the producers of the material; that would be the foundry. The foundry may change from time to time based on the metals market, but the supplier has the buying power to ensure that the material always meets their product standards. 2. The PSTC standard that the product adheres to is only the specification for the type of steel and the finish (304 stainless steel, bright annealed). This is specified by the metals industry. The metals industry specification does not call out a surface roughness parameter as stated in the PSTC handbook. (We have found the product to be very consistent throughout the time that we have been in business.) 3. We purchase the material in lots of 50 sheets, sized 1.22 m x 1.52 m (48 x60 ), 18 gauge, bright annealed 304 stainless steel. This helps ensure that we get a large sampling for consistency. We require that every sheet is prepared with a protective vinyl covering laminated to the "good" side ensuring the protection of the product for accurate and repeatable testing results. 4. We require the supplier to provide certification of every lot for tractability. We keep that document on file. Each lot is numbered sequentially by ChemInstruments staff upon arrival at our facility. We began using this lot numbering system for traceability in the year Typically, we deplete an entire lot of material every 6-7 months. 5. We perform a surface roughness check on all four corners of every fifth sheet in the entire lot. Each corner is checked in two directions - with and against the "grain" of the metal. We use a profilometer to measure and record the surface roughness (Ra). We keep records of the results along with the vendor certification mentioned above. Each panel cut from that lot is acid etched on the "bad" side with traceability information: ChemInstruments name, phone number, date, web address, and lot number. (Some of this information has changed over the years as technology has advanced.) 6. We have a very detailed process for cutting and handling the panels. This process not only ensures a safe panel for the user to handle, protecting the user from being cut by the sharp edges, but it also ensures that the panel stays free of scratches and other contaminates prior to shipment to the customer. Throughout this process, the vinyl protective covering remains on the good surface to ensure the best quality. This procedure has been used since 1997 with great success. 7. After the panels are fully processed, we store them for shipping in a safe location. When panels are ordered, we carefully wrap them and place in a box for shipment. Each order Page 3 of 5
4 of panels is sent with a Test Panel Tips sheet. This is a document authored by ChemInstruments and contains valuable information regarding panel care and handling. These tips have resulted from many years of learning about and working with panels. This sheet discusses proper handling and cleaning procedures that will ensure the panels remain in good shape for years to come. Many of these hints go beyond the standard procedures outlined by PSTC and other related groups. Usage Once the panels have been received, the user will find that the panels have a protective vinyl covering laminated to the good side. This covering will need to be removed and the surface under it must be cleaned in a special manner prior to use. The Test Panel Tips sheet supplied with every order details the steps that must be taken to properly clean the panel for initial use. These instructions are also discussed in the PSTC handbook in Appendix C, Addendum. Additionally, Appendix C also details the general cleaning procedure for panels throughout their useful life. The purpose for the more rigorous cleaning procedure outlined in the Addendum is to fully remove all of the manufacturing debris left on the surface of the metal which cannot be removed easily. The processing fluids and adhesive residue from the vinyl covering can be quite difficult to remove using the standard cleaning procedures outlined in Appendix C. The main step that thoroughly eliminates the contaminants from the panel surface is the baking procedure. It is a necessary step to burn off any deep rooted contaminants in the surface roughness which cannot be dissolved using the standard cleaning procedure. Once the initial procedure has been performed, the panels will need to be cleaned to the standard procedure noted in Appendix C before finally being ready for testing. In some cases, the initial cleaning procedure might need to be performed a second time to remove very difficult contaminates from the panel surface. These deep contaminants can sometimes be seen in the surface of the panel as a cloudiness or haze. This haze is part of the manufacturing process and cannot be fully removed by cleaning. Solvents simply cannot get down into the microscopic lines in the panel surface to remove all of the haze. The only process we have found to help remove the haze is the initial cleaning/baking procedure, which is outlined in the Addendum. If this haze is not removed, it can affect the test results for many uses until the panel is cleaned thoroughly. The PSTC panel specification and cleaning procedure does not specify cleaning in regard to the haze. The helpful hints that we have included in the Test Panel Tips sheet come from years of dealing with the inconsistencies of the base material beyond the PSTC specification. This is most noticeable when comparing new panels to old ones, since the old panels may have been cleaned tens or hundreds of times based on their age and/or frequency of use. With this haze, it is typical that new panels may not yield as great a peel force as compared to older panels. This is due to the older panels having more clean surface for the adhesive to bond. Even with the initial cleaning procedure performed, the new panels may still have contaminants that will only come loose with repeated cleaning. Page 4 of 5
5 Super Panels ChemInstruments has noted the importance of a highly cleaned panel to be the foundation of superior test results. We have performed numerous studies over the years relating to panel cleaning conditions. We have also worked closely with many industry leaders regarding this topic. By combining that data along with the wants of our customers, in 1999 we introduced an improved alternative to the standard panel described above. We call this panel a Super Panel. The Super Panel begins with the same 304 stainless steel material used in a standard panel. We then check it for the correct profilometer readings. At this point the raw sheet material is redirected to be buffed. An entire sheet is sent thru a wide web buffing machine that deep cleans the surface of contaminates. This process uses a non-abrasive cleaning compound combined with a soft buffing roller using light pressure. It is then buffed, washed, and a new protective vinyl covering is laminated to the good side. The buffed material is then redirected back to the same steps as a standard panel. After the panels are cut, deburred, and serialized, the Super Panel process continues. The vinyl protective covering is removed, and then the panel is cleaned with an MEK wiping. Batches of cleaned panels are placed into an oven for one hour at 175⁰C (350⁰F). Once they have been removed and left to cool, they are cleaned again with an MEK wiping using lint free wipers. Panels that have been cleaned and are dry are then stacked with lint free tissues separating them to keep them clean and free of scratches. The Super Panel process cleans a panel more effectively, thus shortening the start time to testing. The recipient of a new lot of Super Panels can quickly clean the panels by following the procedures outlined in Appendix C and start using them immediately thereafter. Numerous studies have shown that Super Panels bring the data into specification sooner than a standard panel since they are super clean. Pricing on Super Panels is slightly higher than standard panels, but the added service yields consistent results much sooner than standard panels. We hope that this information sheet has been informative and helpful in answering some of the questions that arise from buying new panels. It turns out that panels are much more complex than they appear and the cleaning process becomes a very important part of the break-in period of new panels. Please contact ChemInstruments for further information regarding panels at: (513) or info@cheminstruments.com Page 5 of 5
Peel Adhesion of Pressure Sensitive Tape
Harmonized International Standard Peel Adhesion of Pressure Sensitive Tape Call Letters Date of Issuance Revised Revised Revised PSTC 101 10/00 10/03 05/07 11/13 1. SCOPE 1.1 These methods cover the measurement
More informationTECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH
TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range
More informationMETAL METAL
12654 - METAL 12654-1 PART ONE: GENERAL METAL 1.1 Architectural metals shall be of the best commercial quality and their various forms shall be straight and true. There shall be no scratches, scars or
More informationCall Today for a Free Quote! Immediate Availability. Inexpensive Delivery.
Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery. ASTM A606-4 / A588 / A847 (AKA CORTEN ) STRUCTURAL COMPONENTS FLAT SHEETS, FLAT BAR, PLATE, COIL, RECTANGULAR TUBE, SQUARE TUBE,
More informationPanelKeeper GL1500 Kit
Rudy's ** Removable side panel cover retainer system ** PanelKeeper GL1500 Kit Installs in about 10 minutes per side - No tools required! Both sides included Prevents loss of detachable panels Stop losing
More information3. SIGNIFICANCE AND USE 3.1 These test methods provide a quantitative measure of the tack property of a pressure sensitive adhesive.
Call Letters PSTC-16 Date of Issuance 10/00 Revised 10/03 Revised 05/07 Loop Tack 1. SCOPE 1.1 This test method is intended to determine the tack properties of a pressure sensitive adhesive. This test
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T4851-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.180 Z 38 GB/T 4851-2014 Replacing GB
More informationGrafiWrap Vehicle Wrapping
GrafiWrap Vehicle Wrapping What is GrafiWrap? GrafiWrap is the registered trade name for a combination of materials used in the wrapping of a vehicle. The GrafiWrap system is a sandwich made up of a cast
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 56-30: DOOR GENERAL. Door 56-30: DOOR. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Door CHAPTER 56-30: DOOR GENERAL 56-30: DOOR 1. General The cabin door windows are manufactured of acrylic and adhesive bonded to the door structure. Replacement is accomplished
More informationIt s not how it s made. It s how it s made to last.
It s not how it s made. It s how it s made to last. Fort Wayne Anodizing The most advanced fully-automated industrial hard coat anodizing line. Our commitment to a superior product that s made to last
More informationMold Release, Break-In, Maintenance and Storage. Linda Bergstrom
Mold Release, Break-In, Maintenance and Storage Linda Bergstrom Mold Release Requirements Form a barrier between the mold and molded part Provide a lubricating film which allows the molded part to be easily
More informationCalibration and Gage Block Use
REHDER DEVELOPMENT COMPANY 2139 Klondike Rd W Lafayette, IN 47906 USA Tel: (765) 418-1997 Fax: (765) 463-3779 Web: http://www.rehder-dev.com Email: t.houck@rehder-dev.com Technical Innovations Calibration
More informationZygo Optical Profilometer Measurements of Soft Nickel Coupon: Sample Tests for Mach-6 Quiet-Flow Nozzle Throat
S.P. Schneider, Purdue University, School of AAE, 765-494-3343, 07/03/03, 2:52 PM Page 1 S.P. Schneider, Purdue University, School of AAE, 765-494-3343, 19 May 1999 Measurements by Chris Tieche, Purdue
More informationNuvite Recommended Polishing Procedures for NuShine II Metal Polish The Nuvite Look The Better the Polish Job, The Longer It Lasts!
Nuvite Recommended Polishing Procedures for NuShine II Metal Polish The following polishing procedures are a compilation of many methods developed through our own use of our products in field and lab testing,
More informationApplication Notes! RIGID MATERIALS. Rigid material standards. Printing on Rigid Materials with the Gerber Solara ion & Gerber CAT UV
Printing on Rigid Materials with the Gerber Solara ion & Gerber CAT UV This document instructs on the proper use of rigid materials when printing on the flat bed of the Gerber Solara ion & Gerber CAT UV.
More informationWELCOME. to the Open House of. of Eastman Kodak Company THE.PAPER MILLS AND BARYTA DIVISIONS
WELCOME to the Open House of THE.PAPER MILLS AND BARYTA DIVISIONS of Eastman Kodak Company --~~~~~~~~~~~~~~~~~~~~~ L To f'iklg~.sr! ~fte~j Follow the Arrows On Your Open House Visit 5TART, FIELD 0 I v
More informationStandard Operating Manual
Standard Operating Manual Buehler EcoMet TM 300 Polisher Version 1.0 Page 1 of 19 Contents 1. Picture and Location 2. Process Capabilities 2.1 Cleanliness Standard 2.2 Possible Polishing Materials 2.3
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationManufacturing Workmanship Standards. KSO Rev 1
Manufacturing Workmanship Standards KSO Rev 1 This document is a statement to the quality and workmanship by Kso Metalfab, Inc. The definitions, procedures, and responsibilities contained in this Workmanship
More informationQuality Assurance Supplier Reference Guide
Quality Assurance Supplier Reference Guide Tel: (561) 840-1800 * Fax: (561) 844-8551 www.svmicrowave.com Table of Contents Page 1.0 Introduction 1 2.0 SV Drawing Format Interpretation 2 3.0 Inspection
More informationDESIGN FOR POLISHING AND PLATING
DESIGN FOR POLISHING AND PLATING Polishing and plating are generally considered to be a part of finishing process. Polishing processes Conventional polishing In conventional polishing, surface irregularities
More informationEDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives
EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives Our commitment to our customers is set in stone. About Us For nearly forty years BORIDE Engineered Abrasives has developed
More informationLYON INDUSTRIES. Since 1968
LYON INDUSTRIES The Shim Source Since 1968 Index Product Page No. Tool Wrap................................. 3 Slotted Shim Kits............................ 4 Stainless Steel Shim Stock..................
More informationStainless Steel Optisheen Polished Sheet
Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must
More informationWOOD WOOD
12655 - WOOD 12655-1 Part One - General WOOD 1.0 All materials used in the finishing shall be of the highest grade of their respective kinds. Materials shall be evenly and smoothly applied by skilled mechanics.
More informationManufacturing Workmanship Standards YHF-WS Rev 2
Manufacturing YHF-WS Rev 2 Approved by & date: 02/25/16 Approved by & date: 02/25/16 This document is a statement to the quality and workmanship of York Haven Fabricators, Inc., henceforth referred to
More informationNEW COATINGS FOR THE FUNCTIONALIZATION OF ENAMELLED SURFACES
NEW COATINGS FOR THE FUNCTIONALIZATION OF ENAMELLED SURFACES Giovanni Baldi Ce.Ri.Col. e-mail: baldig@colorobbia.it Andrea Cioni Ce.Ri.Col. e-mail: cionia@colorobbia.it Valentina Dami Ce.Ri.Col. e-mail:
More informationBetter Soldering (A COOPER Tools Reprint) Overview Solder and Flux Base Material
Better Soldering (A COOPER Tools Reprint) Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished
More informationMANUAL 3. Wrapping with Graficast Automotive & Deco Films HIGH LE VEL. GrafiWrap. Grafityp wrapping films
MANUAL 3 GrafiWrap Grafityp wrapping films Wrapping with Graficast Automotive & Deco Films 2017 1 WHAT IS GRAFIWRAP? GrafiWrap is a trade name that was registered by Grafityp Selfadhesive Products, which
More informationSoldering Basics. Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment.
Soldering Basics Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished by quickly heating
More informationCARBORUNDUM MEZZOTYPE dark field & reductive techniques
CARBORUNDUM MEZZOTYPE dark field & reductive techniques with Akua Carborundum Gel, a platemaking medium July 2017 AKUA CARBORUNDUM GEL The Akua Carborundum Gel for platemaking is used to create collagraph
More informationQuality Assurance Supplier Reference Guide
Quality Assurance Supplier Reference Guide Tel: (561) 840-1800 * Fax: (561) 844-8551 www.svmicrowave.com 7/20/2015 Table of Contents Page 1.0 Introduction 1 2.0 SV Drawing Format Interpretation 2 3.0 Inspection
More informationTwin screw and barrel are the heart of extruders and play very crucial role in extruder.
SHREE RADHEKRISHNA EXTRUSIONS PVT.LTD, a renewed engineering company has been Serving in the field of manufacturing screw & barrel for last more then 20 years. Radhekrishna Extrusions manufactures screw
More informationTraditional Grinding & Polishing
Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in
More informationPremium quality tools are important; not only will high quality rollers, brushes, and products create a better result, they ll make your job easier.
How to Paint your Pool Introduction Painting is one of the best ways to protect and beautify your pool. In addition to adding a vibrant, fresh color, a new coat of paint can be a cost- efficient way to
More informationSUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
"BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,
More information8 x 10 Sandwich Panel
*Before starting, please read entire manual *Changes can be made in order for this manual to work for you 8 x 10 Sandwich Panel Follow all applicable sections of the attached Manufacturing Plan. Objectives:
More informationInstallation and Care Instructions: Rear Windshield - CFMOTO UForce 800
Installation and Care Instructions: Rear Windshield - CFMOTO UForce 800 *** DO NOT REMOVE PROTECTIVE LAYER FROM THE WINDSHIELD AT THIS TIME. THIS SHOULD BE YOUR LAST AND FINAL INSTALLATION STEP AS WINDSHIELD
More informationManufacturing Workmanship Standards Implemented November 2011
Manufacturing Implemented November 2011 ~ 1 ~ This document is a statement to the quality and workmanship by York Haven Fabricators, Inc., henceforth referred to as YHF. The definitions, procedures, and
More informationWindow Cleaning Network Group Scratched Glass Seminar July 27, 2002 Location: Oconomowoc, Wisconsin
Window Cleaning Network Group Scratched Glass Seminar July 27, 2002 Location: Oconomowoc, Wisconsin 1. Introduction : FIELDS CONSTRUCTION SERVICES Construction Window Cleaning. We do post construction
More information1. Storage and transportation. Care Instruction
This is to explain proper ways to apply REFLOMAX GLODIAN EGP, HIP and SG films to traffic signs and safety signs at construction site, etc. Even though it is impossible to explain all aspects that need
More informationLaser cutting Lamination stacking, welding, and bonding C-5 Coating Finger plates Inspection. A Reliable Resource for Your Business
Laser cutting Lamination stacking, welding, and bonding C-5 Coating Finger plates Inspection A Reliable Resource for Your Business Laser Cutting Polaris Laser Laminations is a laser cutting job shop specializing
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationLighting designers apply both art and science to determine appropriate downlighting products to meet the varying requirements of a space.
technical bulletin: REFLECTOR MANUFACTURING Lighting designers apply both art and science to determine appropriate downlighting products to meet the varying requirements of a space. It is the manufacturer
More informationINSTALLATION MANUAL STORAGE
IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no
More informationPractical Information: ORALITE V98 Conformable Graphic Sheeting
Page 1 of 5 General Information (hereto referred to as V98) is a tough, weather and solvent resistant product designed for graphics applications on vehicles with smooth painted or unpainted surfaces. Templating
More informationTechnical Information
Technical Information Handling, Inspecting and Fabricating Pilkington Activ Self-Cleaning Glass Pilkington Activ Self-Cleaning Glass has a thin, clear, permanent, pyrolytic Titanium Oxide coating on one
More informationKent Fold Down Bollard
Kent Fold Down Bollard Specify: Kent Fold Down Bollard ; 101mm Diameter; 3mm Wall; Grade 316L Stainless Steel; Bright Satin Finish; Fold Down. The Kent Fold Down Bollard () is manufactured from 101mm diameter
More informationDIAMETER SELECTION ABRASIVE SELECTION
GENERAL APPLICATION AND SELECTION OF the tool DIAMETER SELECTION Tool diameter is determined by the nominal bore size in which the tool is to operate. The Flex-Hone Tool is always produced and used in
More informationStainless Steel - Surface Finishes & Polishing
Surface finish is an important element in any specification of stainless steel regardless of the intended use. For those applications where appearance is important, finish is a design element and must
More informationPART NUMBER: T-R20 PACKAGE CONTENTS: GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS Scuff Plate TOOLS REQUIRED: APPLICABLE MODELS: 2013 MAZDA CX-
PART NUMBER: 0000-8T-R20 PACKAGE CONTENTS: GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS TOOLS REQUIRED: APPLICABLE MODELS: 2013 MAZDA CX-5 FRONT SCUFF PLATE (Qty 2) 50% ISOPROPYL ALCOHOL/RESIDUE FREE
More informationUNSIGNED HARDCOPY NOT CONTROLLED
SUBJECT: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS REFERENCES DEFINITIONS Painting Manager, Hardware Engineering Maintenance Revision Establish painting and inspection requirements for organic finishes
More informationInstallation Instructions
www.marlite.com Effective Date 03/01/2018 ARTIZAN FRP, SYMMETRIX FRP, ENVUE FRP, STANDARD FRP Installation Instructions Statements expressed in this technical bulletin are recommendations for the application
More information380 Swimming Pool Paint
Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is
More informationSeptember 10, 2009 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
September 10, 2009 Page 1 PRODUCT FEATURES BASIC USES/RELATED USES Interior decorative tile. Architectural tile for decorative wall surfaces, backsplashes and other applications. Custom architectural and
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationLUXAR Anti reflective coated glass Handling Procedures for LUXAR
LUXAR Anti reflective coated glass Handling Procedures for LUXAR - 1-29.03.99 Table of contents 0. Introduction of LUXAR 1. Transportation / Packing 2. Storage 3. Handling / Cutting 4. Treatment 5. Washing
More informationSHELDON Versatile seating
UK street furniture designers & manufacturers As UK based, designers and manufacturers, Street Design can manufacture and supply Sheldon seating to suit your specific requirements. Sheldon versatile seating
More informationPROCESSING GUIDE OLTRELUCE
PROCESSING GUIDE OLTRELUCE Version I October 2012 Revised information on products, product availability and processing guidelines is regularly updated on the AGC Glass Europe website www.yourglass.com
More informationGLASS HEAT TREATMENT MULTIVER GLASS TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS. DATA SHEET / Quebec. Version 2.
MULTIVER GLASS GLASS HEAT TREATMENT TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS DATA SHEET / Quebec Version 2.1 Type of Glass Offered by Multiver TEMPERED GLASS To increase the
More informationThe connecting edges are lined up and seamlessly welded together with a 1000 C torch.
Sheets of brass and other alloys are cut and welded to form the tubing for the bell, bow, body, and neck; tone holes are drilled and drawn from the body tubing; and the bodies are then inspected and passed
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationWhite paper. Exploring metal finishing methods for 3D-printed parts
01 Exploring metal finishing methods for 3D-printed parts 02 Overview Method tested Centrifugal disc Centrifugal barrel Media blasting Almost all metal parts whether forged, stamped, cast, machined or
More informationKENT FLAT TOP BOLLARD KFTB101/3
FLAT TOP BOLLARD Specify: Kent Flat Top Bollard KFTB101/3; 1200mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin Finish; Cast in 300mm Below Ground. The Kent Flat Top Bollard
More informationSmall Scraping Plane 05P29.50
Small Scraping Plane 05P29.50 U.S. Des. Pat. D609,548 The Veritas Small Scraping Plane is used for the final smoothing of small, flat surfaces, even if they are highly figured, or small areas of difficult
More informationSURFACE PREPARATION AND MATERIAL APPLICATION KEIM MINERAL PAINTS
SURFACE PREPARATION AND MATERIAL APPLICATION KEIM MINERAL PAINTS PRE-TREATMENT KEIM Mineral Paints are different to conventional film forming paints. Mineral paints are made with potassium silicate and
More informationStandard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing 1
Designation: A 787 05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing This standard is issued under the fixed designation A 787; the number immediately
More informationLapping Plate 05M20.20
Lapping Plate 05M20.20 U.S. Des. Pat. D593,140 Lapping is the process of rubbing two surfaces together with an abrasive and a lubricant to improve the quality of at least one of the surfaces. Although
More informationSpokeshaves. U.S. Des. Pat. D499,770
Spokeshaves U.S. Des. Pat. D499,770 Introduction The Veritas spokeshaves have been designed for smooth, effective shaping of chair spindles, tool handles, panel edges, paddle shafts, etc. The large spokeshave
More informationWEAR SAFETY GLASSES WHEN INSTALLING THIS KIT.
INSTALLATION INSTRUCTIONS Trans4mer Mounting Systems Part No. 29753 (black) Part No. 65654 (stainless) for full size GM pickups, and Blazer, Yukon, Suburban, Tahoe As you read these instructions, you will
More informationKent Airport Bollard KDCT-140/3
Airport Bollard Kent Airport Bollard Specify: Kent Airport Bollard ; 1200mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin finish; Cast in 300mm below the ground. The Kent Smiley
More informationLoose Lay Luxury Vinyl Plank
Loose Lay Luxury Vinyl Plank FLEX COLLECTION Installation & maintenance * PLEASE READ CAREFULLY * Installation, maintenance & warranty guideline for loose lay luxury vinyl products. Adherence to This guideline
More informationKent St. George Planter KSGP-1200
St. George Planter Specify Kent St. George Planter ; 900mm overall height; 1200mm overall length; 600m overall width; Grade 316L Stainless Steel; Powdercoated Kent Antique Finish; Laser Cut St. George
More informationWHAT S ON THE MARKET?
Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some
More informationPilkington OptiView Protect. Pilkington OptiView. Handling and Processing Guidelines
Clear float glass Pilkington OptiView Protect Pilkington OptiView Pilkington OptiView Protect Handling and Processing Guidelines Pilkington OptiView and Pilkington OptiView Protect 1. Product description
More informationUNCONTROLLED 3 STANDARD PROCEDURES FOR PREPARING 33KV CABLES
3 STANDARD PROCEDURES FOR PREPARING 33KV CABLES 3.1 Single-Core Copper Wire Screened Polymeric Cables 3.1.1 Removing the Outer Sheath Clean and abrade the outer sheath with an approved abrasive paper for
More informationM A N U A L 6 June 2017
M A N U A L 6 June 2017 What are Protection Films? These films are meant to protect the vulnerable parts of cars, bicycles, motorbikes, etc... They are transparent glossy, so the underlying colour remains
More informationPOLISHING GLOBAL LEADER IN TABLET COMPRESSION TOOLING
POLISHING GLOBAL LEADER IN TABLET COMPRESSION TOOLING NATOLI.COM LEVEL 1 STANDARD NATOLI PROFESSIONAL POLISHING KITS Punches and dies experience a lot of wear during tablet production, leading to tooling
More informationScreen Coating Techniques
Screen Coating Techniques Direct emulsions offer quality in print, mechanical endurance, solvent & water resistance, and affordability all in one bucket. To use these qualities profitably requires a basic
More information*Before starting, please read entire manual *Changes can be made in order for this manual to work for you. 3 x 6 I-Beam
*Before starting, please read entire manual *Changes can be made in order for this manual to work for you 3 x 6 I-Beam Follow all applicable sections of the attached Manufacturing Plan. Objectives: Understand
More information3M Wrap Film Series 1080 Preparation of Substrates, Application, Maintenance and Removal
Instruction Bulletin 1080 3M Europe, Effective August 2015 3M Wrap Film Series 1080 Preparation of Substrates, Application, Maintenance and Removal Instruction Bulletin Recommended Types of Graphics and
More informationMasking: Each mirrored sheet is well protected by a durable paint backing and
STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom
More informationManual 2: Graficast print films for high level wrapping. MANUAL 2. Graficast Print Films FOR HIGH LE VEL WR APPING
Manual 2: Graficast print films for high level wrapping. MANUAL 2 Graficast Print Films FOR HIGH LE VEL WR APPING 2017 1 WHAT IS GRAFIWRAP? GrafiWrap is the registered trade name for a combination of materials
More informationITEM#:DNSW5102J PK IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. St. Thomas Swivel Rocking Dining Chair
ITEM#:DNSW5102J-48019-2PK IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY St. Thomas Swivel Rocking Dining Chair Customer Service E-Mail : customerservice@foremostgroups.com 8:30a.m. 5:00p.m. EST,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Brush Guard Kit Kit no. 67730 (black), 67731 (stainless) for GMC Trucks Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationBühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills.
Bühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills. Bühler dies and roller shells. Increasing lifetime and profits. Bühler specializes in the manufacture of high-precision
More informationBetter by Design. PVC Coated Conduit System. Technical Services Tel: Canada Tel: Fax:
PVC Coated Conduit System Overview Ocal Blue PVC coated conduit and fittings represent a complete corrosion protection package for your entire conduit system. This extensive product line includes the largest
More informationBetter by Design: Guidelines for Designing the Perfect Plated Piece
MPC Technical Library Better by Design: Guidelines for Designing the Perfect Plated Piece Suggestions, tips and design considerations for enhancing plated part appearance, improving performance and facilitating
More informationContents. pages 20-24: Installing Edge sinks into. custom laminate countertops page 8: Installing Edge sinks into postform laminate countertops
Contents pages 2-8: Installing Edge sinks into custom laminate countertops page 8: Installing Edge sinks into postform laminate countertops pages 9-14: Installing Acrylic sinks into custom laminate countertops
More informationRiver Enamel. Technical Data. Enamel Chalkboard Enamel Whiteboard Enamel Steel Sheet for Interior. (Dual Coat Enamel)
Technical Data Enamel Chalkboard Enamel Whiteboard Enamel Steel Sheet for Interior River Enamel (Dual Coat Enamel) August 2015 Introduction Porcelain enamel is made by fusing glass glaze on a metal base
More informationSpokeshaves. U.S. Des. Pat. D499,770 U.S. Des. Pat. D594,728
Spokeshaves U.S. Des. Pat. D499,770 U.S. Des. Pat. D594,728 The Veritas spokeshaves have been designed for smooth, effective shaping of chair spindles, tool handles, panel edges, paddle shafts, etc. The
More informationHow to Sharpen a Knife
How to Sharpen a Knife Even a good knife will lose some of its sharpness with time. However, sharpening a knife is easy if you have the right tool and know how to use it. Generally three different materials
More informationMirrorcraft Project Especially for Dogs
Mirrorcraft Project Especially for Dogs DIY Customized Pet Mirror Make a mirror photo frame to Display your Pets Photo Irene Jacobs April 2007 Mirrorcraft is a fun craft to easily create you own customized
More informationXyron Professional 2500 Laminating System
Xyron Professional 2500 Laminating System Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com U S E R S G U I D E 2500 Adhesive Application & Laminating System The XM2500
More informationKent Slope Top Bollard KST-101/3
Slope Top Bollard Kent Slope Top Bollard KST-101/3 Specify: Kent Slope Top Bollard ; 1200mm Overall Height; 3mm thick wall; Grade 316L Stainless Steel; Bright Satin finish; Cast in 300mm below the ground.
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationCurium 19H Installation Instructions & Parts List
Curium 19H Installation Instructions & Parts List Illustration Curium 19H Right Hand Page 1 of 15 01/07/2016 Revision 2.1 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationApplication of 3M Pressure Sensitive Films to 3M Panagraphics Substrates
Instruction Bulletin 5.30 Release B, Effective October 2006 See bulletin change summary on last page Application of 3M Pressure Sensitive Films to 3M Panagraphics Substrates Preparation Points to Consider
More informationTrade of Toolmaking. Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2. Published by. Trade of Toolmaking Phase 2 Module 3 Unit 9
Trade of Toolmaking Module 3: Milling Unit 9: Precision Vee Block Assembly Phase 2 Published by SOLAS 2014 Unit 9 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
More informationCurium 19.4H Installation Instructions & Parts List
Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More information