Exercise01: Circle Grid Obj. 2 Learn duplication and constrain Obj. 4 Learn Basics of Layers

Size: px
Start display at page:

Download "Exercise01: Circle Grid Obj. 2 Learn duplication and constrain Obj. 4 Learn Basics of Layers"

Transcription

1 01: Make new document Details: 8 x 8 02: Set Guides & Grid Preferences Details: Grid style=lines, line=.5, sub=1 03: Draw first diagonal line Details: Start with the longest line 1st. 04: Duplicate first line Details: Learn Key-Combos 05: Ensure correct spacing! Details: Important! 06: Ensure correct intersection! Details: Important! Page 1

2 07: Group first line set and duplicate Details: Learn Group key command 08: Repeat Group/duplication steps Details: 8 lines intersect whole doc. 09: Name your current layer lines Details: Open and use Layer Panel 10: Make new layer called circles Details: give it a new color for guides 11: Lock the lines layer Details: Select circles to start using 12: Draw first circle, tangent to lines Details: Option/Alt + Shift from center Page 2

3 13: Duplicate first circle Details: Use keyboard shortcuts 14: Group first set of circles Details: Ensure tangency first! 15: Duplicate circle set and group 4 Details: Repeat steps, = grid of 16 16: Complete grid of 16 circles Details: Group them 17: Turn visibility off of lines layer Details: Also, View > Hide Grid 18: Center the group on the artboard Details: Use Align Panel and Save Page 3

4 19: Create layer for additional guides Details: draw lines on new layer 20: Copy the grid into a new document Details: 11 x 8.5 doc, 4 grids 21: Print templates + sketch ideas Details: min: 16 grids total (4 x4) Page 4

5 01 New Document Make a new document that is 8 x 8 You can either use the Illustrator menu: File > New or you can use the keyboard shortcut: Mac: Command + N PC: Control + N Page 5

6 02 Set Guides and Grid In the Illustrator Preferences, set the grid to match the ones in the example to the right. You can use other grid settings, but these will duplicate the same results as the demo. Mac Preferences are located: Illustrator > Preferences PC Preferences are located: Edit > Preferences Page 6

7 03 Draw Diagonal Guide Lines For this exercise we will only be using the grid for visual geometric lines. We will not be using the grid s Snap feature to draw the circles. 1. Draw the first line using the Line Tool in the toolbar. Set the Stroke color to black, and in the Stroke Panel, set its size to 0.25pt. 2. To constrain it to a 45 degree axis, hold down the SHIFT key as you draw the line diagonally. 3. Be sure to draw the longest line first, as it will be used to duplicate other lines. Page 7

8 04 Duplicate the first line. 1. Click and hold the original line 2. Hold down the shortcut keys to duplicate AND constrain the line to a 45 degree axis, as follows: a. Mac: Option + Shift b. PC: ALT + Shift 3. When the new line is in the correct place, release the MOUSE first. If you release the shortcut keys first, it will fail to duplicate or constrain the line. The result of releasing the keys first is simply moving the original line to the wrong place. If this happens, use the Undo command shortcut: a. Mac: Command + Z b. PC: Control + Z Page 8

9 05 Ensure the correct spacing before continuing! If you have the wrong spacing now, you will duplicate the error throughout the template guides, making a useless grid. Make sure that the spacing looks like the picture on the right. The highlighted grid marks are simply to help you count the grid divisions easily. Page 9

10 06 Check intersections before continuing! You also need to check the intersections carefully before continuing. To do this, you MUST zoom in with the magnification Zoom Tool. Zoom Tool If the line is slightly off, move it with the Selection Tool. To zoom out, hold down Option (Mac) or ALT (PC) while clicking zooming. Page 10

11 07 Group and duplicate 1. Select the first two lines and group them using keyboard shortcuts: a. Mac: Command + G b. PC: Control + G c. HINT: To ungroup objects, select the group and add the Shift key to the above combos. 2. Duplicate the group using Option/ALT + Shift similarly to step Repeat, Repeat, Repeat Repeat the steps above until you produce 8 lines that fully intersect the page with the proper spacing and placement. To the right...8-line document: Page 11

12 09 Name Layer 1. Open the Layers Panel (Window > Layers). <- 09 figure left 2. Double-click the layer and rename it lines. 10 Make circles layer 1. Click New Layer button in Layer Panel. 2. Double-click the new layer and rename it circles. 3. Set the color to a different color than your previous layer. This is the color to highlight a layer s guides and selected objects. ^ 10 figure above 11 Lock lines layer and select circles This will protect the lines and create new objects in circles. 11 figure right -> Page 12

13 12 Draw first circle Make sure SNAP is OFF! Draw the first circle using the Ellipse Shape Tool. It MUST be tangent to its enclosing diagonal lines to ensure a sound grid structure. Set its fill to transparent, stroke to black, and its stroke size to ***For a perfect circle, you must hold down SHIFT while drawing. HINT for circles Illustrator will, by default, start drawing an ellipse/ circle based on its perimeter line, making it hard to predict where to start the drawing. To draw a predictably-placed circle, start from its desired center area, and press Option/ALT + Shift. The Option/ALT key will draw the circle from the center, radiating outward. Page 13

14 Page 14

15 17 Turn off visibility for lines layer Let s see how it looks without the diagonal guides. 18 Center to Artboard With the entire set of 16 circles selected, open the Align Panel and do the following: 1. Select the Artboard button 2. Select the Horizontal Align feature 3. Select the Vertical Align feature 4. Save the document. Page 15

16 19 Create new layer This layer will be to draw intersecting guide lines through the center points of the circles at all 90 and 45 angles. Thus, you will draw horizontal, vertical, and diagonal lines intersecting all circles. This will create a drawing template on which you can see the correct geometric anchors in order to create perfect curves. You can unlock the circles layer and enable Snap to Point. This will help you draw lines based on the circles points for accuracy. Do NOT Snap to Grid. Page 16

17 20 Copy the grid to a new document With the new layer and circles layer unlocked, press (PC) CONTROL + A or (Mac) COMMAND + A to Select All. Copy both the guide lines and circles. Create a new file 11 x 8.5 and paste. Group the pasted selection and scale it down so that you can duplicate 4 of these grids on the page. While selected, lower the transparency of the grids so that they can be seen when printed, but so that they won t visually overwhelm your sketches. Page 17

18 21 - Final Step Print and Sketch Print AT LEAST 4 of these empty grid template pages. You will use these to handsketch some ideas before you start working with the pen tool. Turn in BOTH your digital file as well as the sketches for a grade. Suggestions You should start with simple shapes, being sure to use only the intersections on the perimeter of the circles. These will allow a harmonious grid-based design with good proportions. Page 18

12. Creating a Product Mockup in Perspective

12. Creating a Product Mockup in Perspective 12. Creating a Product Mockup in Perspective Lesson overview In this lesson, you ll learn how to do the following: Understand perspective drawing. Use grid presets. Adjust the perspective grid. Draw and

More information

ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc.

ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. WELCOME TO THE ILLUSTRATOR TUTORIAL FOR SCULPTURE DUMMIES! This tutorial sets you up for

More information

Drawing with precision

Drawing with precision Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial

More information

The Revolve Feature and Assembly Modeling

The Revolve Feature and Assembly Modeling The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling

More information

Evaluation Chapter by CADArtifex

Evaluation Chapter by CADArtifex The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching

More information

EPS to Rhino Tutorial.

EPS to Rhino Tutorial. EPS to Rhino Tutorial. In This tutorial, I will go through my process of modeling one of the houses from our list. It is important to begin by doing some research on the house selected even if you have

More information

Architecture 2012 Fundamentals

Architecture 2012 Fundamentals Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

More information

Part 1- Fundamental Functions

Part 1- Fundamental Functions Part 1- Fundamental Functions Note: Alt+Tab will allow you to move between programs in the docker. Shift+Tab removes right pallets Tab removes all pallets Ctrl+1= centers art board Ctrl + 0= fill window

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

11 Advanced Layer Techniques

11 Advanced Layer Techniques 11 Advanced Layer Techniques After you ve learned basic layer techniques, you can create more complex effects in your artwork using layer masks, path groups, filters, adjustment layers, and more style

More information

Introduction to CATIA V5

Introduction to CATIA V5 Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower

More information

1 Sketching. Introduction

1 Sketching. Introduction 1 Sketching Introduction Sketching is arguably one of the more difficult techniques to master in NX, but it is well-worth the effort. A single sketch can capture a tremendous amount of design intent, and

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch

More information

Chapter 1. Creating, Profiling, Constraining, and Dimensioning the Basic Sketch. Learning Objectives. Commands Covered

Chapter 1. Creating, Profiling, Constraining, and Dimensioning the Basic Sketch. Learning Objectives. Commands Covered Chapter 1 Creating, Profiling, Constraining, and Dimensioning the Basic Sketch Learning Objectives After completing this chapter, you will be able to: Draw the basic outline (sketch) of designer model.

More information

Parametric Drawing Using Constraints

Parametric Drawing Using Constraints CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply

More information

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece

Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece 1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a

More information

Autodesk Inventor Module 17 Angles

Autodesk Inventor Module 17 Angles Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,

More information

GIMP WEB 2.0 ICONS. Web 2.0 Icons: Paperclip Completed Project

GIMP WEB 2.0 ICONS. Web 2.0 Icons: Paperclip Completed Project GIMP WEB 2.0 ICONS WEB 2.0 ICONS: PAPERCLIP OPEN GIMP or Web 2.0 Icons: Paperclip Completed Project Step 1: To begin a new GIMP project, from the Menu Bar, select File New. At the Create a New Image dialog

More information

Hydro Hull. Chapter 21. Boat. A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2).

Hydro Hull. Chapter 21. Boat. A. Save as HYDRO. Step 1. Open your HULL MID PLANE file (Chapter 2). Chapter 21 Boat Hydro Hull A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2). Step 2. Click File Menu > Save As. Step 3. Key-in HYDRO for the filename and press ENTER. B. Delete Loft1,

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Modeling Basic Mechanical Components #1 Tie-Wrap Clip Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely

More information

After completing this lesson, you will be able to:

After completing this lesson, you will be able to: LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a Circle using 6 different methods. 2. Create a Rectangle with width, chamfers, fillets and rotation. 3. Set Grids and Increment

More information

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece

More information

Graphic Design Tutorial: Adobe Illustrator Basics

Graphic Design Tutorial: Adobe Illustrator Basics Graphic Design Tutorial: Adobe Illustrator Basics Open your Illustrator Use the Start Menu OR the AI icon on your desktop What is Illustrator? Illustrator is a vector drawing program. It is used to draw

More information

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry 2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply

More information

Working With Drawing Views-I

Working With Drawing Views-I Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined

More information

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity

1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines

More information

1. Reference Guide and Glossary

1. Reference Guide and Glossary 1. Reference Guide and Glossary Design Panel New Click the New Icon at any time to create a new project from scratch. Projects Browse, select, and cut projects from the Projects Tab. This includes your

More information

Toothbrush Holder. A drawing of the sheet metal part will also be created.

Toothbrush Holder. A drawing of the sheet metal part will also be created. Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit

More information

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011 AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric

More information

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

CREO.1 MODELING A BELT WHEEL

CREO.1 MODELING A BELT WHEEL CREO.1 MODELING A BELT WHEEL Figure 1: A belt wheel modeled in this exercise. Learning Targets In this exercise you will learn: Using symmetry when sketching Using pattern to copy features Using RMB when

More information

Release Notes - Fixes in Tekla Structures 2016i PR1

Release Notes - Fixes in Tekla Structures 2016i PR1 Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups

More information

Digital Photography 1

Digital Photography 1 Digital Photography 1 Photoshop Lesson 3 Resizing and transforming images Name Date Create a new image 1. Choose File > New. 2. In the New dialog box, type a name for the image. 3. Choose document size

More information

Wireless Mouse Surfaces

Wireless Mouse Surfaces Wireless Mouse Surfaces Design & Communication Graphics Table of Contents Table of Contents... 1 Introduction 2 Mouse Body. 3 Edge Cut.12 Centre Cut....14 Wheel Opening.. 15 Wheel Location.. 16 Laser..

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Release Notes - Fixes in Tekla Structures 2016i SP1

Release Notes - Fixes in Tekla Structures 2016i SP1 Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the

More information

Okay, that s enough talking. Let s get things started. Here s the photo I m going to be using in this tutorial: The original photo.

Okay, that s enough talking. Let s get things started. Here s the photo I m going to be using in this tutorial: The original photo. add visual interest with the rule of thirds In this Photoshop tutorial, we re going to look at how to add more visual interest to our photos by cropping them using a simple, tried and true design trick

More information

Getting Started with. Vectorworks Architect

Getting Started with. Vectorworks Architect Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program

More information

Ornamental Pro 2010 Component Drawing Manual

Ornamental Pro 2010 Component Drawing Manual Ornamental Pro 2010 Component Drawing Manual Introduction This manual explains the methods for creating your own components for the component library. Component mode is for advanced users only. You must

More information

Introduction to solid modeling using Onshape

Introduction to solid modeling using Onshape Onshape is a CAD/solid modeling application. It provides powerful parametric and direct modeling capabilities. It is cloud based therefore you do not need to install any software. Documents are shareable.

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

Sketch-Up Guide for Woodworkers

Sketch-Up Guide for Woodworkers W Enjoy this selection from Sketch-Up Guide for Woodworkers In just seconds, you can enjoy this ebook of Sketch-Up Guide for Woodworkers. SketchUp Guide for BUY NOW! Google See how our magazine makes you

More information

Adobe Photoshop CC update: May 2013

Adobe Photoshop CC update: May 2013 Adobe Photoshop CC update: May 2013 Welcome to the latest Adobe Photoshop CC bulletin update. This is provided free to ensure everyone can be kept upto-date with the latest changes that have taken place

More information

On completion of this exercise you will have:

On completion of this exercise you will have: Prerequisite Knowledge To complete this exercise you will need; to be familiar with the SolidWorks interface and the key commands. basic file management skills the ability to rotate views and select faces

More information

Clock Exercise (Inserting Planes)

Clock Exercise (Inserting Planes) Clock Exercise (Inserting Planes) Prerequisite Knowledge To complete this exercise you will need to be familiar with Sketching, Applying relations, Extrude Boss/ Base, Extrude cut, Applying Textures, Renaming

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators.

Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. Workspace tour Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. This tutorial will help you become familiar with the terminology and

More information

Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

More information

MIRROR IMAGING. Author: San Jewry LET S GET STARTED. Level: Beginner+ Download: None Version: 1.5

MIRROR IMAGING. Author: San Jewry LET S GET STARTED. Level: Beginner+ Download: None Version: 1.5 Author: San Jewry Level: Beginner+ Download: None Version: 1.5 In this tutorial, you will learn how to create a mirror image of your work. Both sides will look exactly the same no matter how much you tweak

More information

Object Snap, Geometric Constructions and Multiview Drawings

Object Snap, Geometric Constructions and Multiview Drawings Object Snap, Geometric Constructions and Multiview Drawings Sacramento City College EDT 310 EDT 310 - Chapter 6 Object Snap, Geometric Constructions and Multiview Drawings 1 Objectives Use OSNAP to create

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Creo Parametric Primer

Creo Parametric Primer PTC Creo Parametric - Primer Student and Academic Editions 02 Helpful hints are enclosed in red brackets or round bubbles like this one! Creo Parametric Primer THIS VERSION OF THE CREO PRIMER HAS BEEN

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Part Design. Sketcher - Basic 1 13,0600,1488,1586(SP6)

Part Design. Sketcher - Basic 1 13,0600,1488,1586(SP6) Part Design Sketcher - Basic 1 13,0600,1488,1586(SP6) In this exercise, we will learn the foundation of the Sketcher and its basic functions. The Sketcher is a tool used to create two-dimensional (2D)

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Chapter 4: Draw with the Pencil and Brush

Chapter 4: Draw with the Pencil and Brush Page 1 of 15 Chapter 4: Draw with the Pencil and Brush Tools In Illustrator, you create and edit drawings by defining anchor points and the paths between them. Before you start drawing lines and curves,

More information

Getting started with. Getting started with VELOCITY SERIES.

Getting started with. Getting started with VELOCITY SERIES. Getting started with Getting started with SOLID EDGE EDGE ST4 ST4 VELOCITY SERIES www.siemens.com/velocity 1 Getting started with Solid Edge Publication Number MU29000-ENG-1040 Proprietary and Restricted

More information

Adobe Photoshop CC 2018 Tutorial

Adobe Photoshop CC 2018 Tutorial Adobe Photoshop CC 2018 Tutorial GETTING STARTED Adobe Photoshop CC 2018 is a popular image editing software that provides a work environment consistent with Adobe Illustrator, Adobe InDesign, Adobe Photoshop,

More information

Activity 1 Modeling a Plastic Part

Activity 1 Modeling a Plastic Part Activity 1 Modeling a Plastic Part In this activity, you will model a plastic part. When completed, your plastic part should look like the following two illustrations. While building this model, take time

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

FUSION 360: SKETCHING FOR MAKERS

FUSION 360: SKETCHING FOR MAKERS FUSION 360: SKETCHING FOR MAKERS LaDeana Dockery 2017 MAKEICT Wichita, KS 1 Table of Contents Interface... 1 File Operations... 1 Opening Existing Models... 1 Mouse Navigation... 1 Preferences... 2 Navigation

More information

Cricut Design Space App for ipad User Manual

Cricut Design Space App for ipad User Manual Cricut Design Space App for ipad User Manual Cricut Explore design-and-cut system From inspiration to creation in just a few taps! Cricut Design Space App for ipad 1. ipad Setup A. Setting up the app B.

More information

The Zen of Illustrator

The Zen of Illustrator The Zen of Illustrator Zen: Seeking enlightenment through introspection and intuition rather than scripture. You re comfortable with the basic operations of your computer. You ve read through An Overview

More information

Techniques for Troubleshooting Sketches &

Techniques for Troubleshooting Sketches & Techniques for Troubleshooting Sketches & Written by Tim Brotherhood These materials are 2001 PTC Conditions of use Copying and use of these materials is authorized only in the schools of teachers who

More information

Existing and Design Profiles

Existing and Design Profiles NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

MODULE 1 IMAGE TRACE AND BASIC MANIPULATION IN ADOBE ILLUSTRATOR. The Art and Business of Surface Pattern Design

MODULE 1 IMAGE TRACE AND BASIC MANIPULATION IN ADOBE ILLUSTRATOR. The Art and Business of Surface Pattern Design The Art and Business of Surface Pattern Design MODULE 1 IMAGE TRACE AND BASIC MANIPULATION IN ADOBE ILLUSTRATOR The Art and Business of Surface Pattern Design 1 Hi everybody and welcome to our Make it

More information

Digital Photography 1

Digital Photography 1 Digital Photography 1 Photoshop Lesson 1 Photoshop Workspace & Layers Name Date Default Photoshop workspace A. Document window B. Dock of panels collapsed to icons C. Panel title bar D. Menu bar E. Options

More information

SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling

SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard

More information

Figure 9.10 This shows the File Scripts menu, where there is now a new script item called Delete All Empty layers.

Figure 9.10 This shows the File Scripts menu, where there is now a new script item called Delete All Empty layers. Layers Layers play an essential role in all aspects of Photoshop work. Whether you are designing a Web page layout or editing a photograph, working with layers lets you keep the various elements in a design

More information

Datum Tutorial Part: Cutter

Datum Tutorial Part: Cutter Datum Tutorial Part: Cutter Objective: Learn to apply Datums in different ways Directions 1. Datum Axis Creation a. First we need to create a center axis for the cutter b. Model Tab > Datum > Select Axis

More information

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax: Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Silhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6

Silhouette Connect Layout... 4 The Preview Window... 5 Undo/Redo... 5 Navigational Zoom Tools... 5 Cut Options... 6 user s manual Table of Contents Introduction... 3 Sending Designs to Silhouette Connect... 3 Sending a Design to Silhouette Connect from Adobe Illustrator... 3 Sending a Design to Silhouette Connect from

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

SolidWorks Tutorial 1. Axis

SolidWorks Tutorial 1. Axis SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

Make Watercolor and Marker Style Portraits with Illustrator

Make Watercolor and Marker Style Portraits with Illustrator Make Watercolor and Marker Style Portraits with Illustrator Save Preview Resources Portrait by Lillian Bertram (Creative Commons Share Alike used here with permission) Step 1: Set up your Illustrator document

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Chapter 8. Working with Transparency, Effects, and Graphic Styles and Recoloring Artwork Delmar, Cengage Learning

Chapter 8. Working with Transparency, Effects, and Graphic Styles and Recoloring Artwork Delmar, Cengage Learning Chapter 8 Working with Transparency, Effects, and Graphic Styles and Recoloring Artwork 2011 Delmar, Cengage Learning Objectives Use the Transparency panel and the Color Picker Recolor artwork Apply effects

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

Photoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box.

Photoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box. CROPPING IMAGES In Photoshop CS6 One of the great new features in Photoshop CS6 is the improved and enhanced Crop Tool. If you ve been using earlier versions of Photoshop to crop your photos, you ll find

More information

Autodesk Medical Center

Autodesk Medical Center Autodesk Medical Center Page 1 Contents Autodesk Medical Center... 1 Revit Projects... 3 Exercise 1 Create a new project file... 3 Datum Elements... 4 Exercise 2 Add Grids... 5 Exercise 3 Edit Levels...

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

COMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION

COMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: 3 COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MCE 511 ENGR. ALIYU, S.J Course title: Computer-Aided Engineering

More information

AutoCAD Civil 3D 2009 ESSENTIALS

AutoCAD Civil 3D 2009 ESSENTIALS AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how

More information

Publication Number spse01510

Publication Number spse01510 Sketching Publication Number spse01510 Sketching Publication Number spse01510 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle

More information

Learning Adobe Illustrator CS5

Learning Adobe Illustrator CS5 Module 1 Contents Chapter 1: Introduction to Adobe Illustrator The Adobe Illustrator Screen...1-1 The Tools Panel...1-3 Drawing Lines...1-3 Tearing off a Panel... 1-3 Drawing Different Line Types... 1-4

More information

Introduction. The basics

Introduction. The basics Introduction Lines has a powerful level editor that can be used to make new levels for the game. You can then share those levels on the Workshop for others to play. What will you create? To open the level

More information

BEST PRACTICES COURSE WEEK 14 PART 2 Advanced Mouse Constraints and the Control Box

BEST PRACTICES COURSE WEEK 14 PART 2 Advanced Mouse Constraints and the Control Box BEST PRACTICES COURSE WEEK 14 PART 2 Advanced Mouse Constraints and the Control Box Copyright 2012 by Eric Bobrow, all rights reserved For more information about the Best Practices Course, visit http://www.acbestpractices.com

More information

Product Modelling in Solid Works

Product Modelling in Solid Works Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve

More information

7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS

7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS 7.0 - MAKING A PEN FIXTURE FOR ENGRAVING PENS Material required: Acrylic, 9 by 9 by ¼ Difficulty Level: Advanced Engraving wood (or painted metal) pens is a task particularly well suited for laser engraving.

More information

Working with Detail Components and Managing DetailsChapter1:

Working with Detail Components and Managing DetailsChapter1: Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail

More information

LightPro User Guide <Virtual Environment> 6.0

LightPro User Guide <Virtual Environment> 6.0 LightPro User Guide 6.0 Page 1 of 23 Contents 1. Introduction to LightPro...3 2. Lighting Database...3 3. Menus...4 3.1. File Menu...4 3.2. Edit Menu...5 3.2.1. Selection Set sub-menu...6

More information