Solidworks tutorial. drawing. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
|
|
- Avice Kennedy
- 5 years ago
- Views:
Transcription
1 Solidworks tutorial drawing A u t h o r : M. G h a s e m i C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r. c o m
2 The manufacturing techniques had a vast development during the past decades. An idea becomes a 3d model in CAD software like solidworks and this model is manufactured through CAM process. There is no need for a drawing sheet in such a process but despite all of these developments in manufacturing, a full detailed drawing of a part in a paper sheet still worth a lot. Why?! a detailed drawing is the identity of a part. Drawing is the common language between all the engineers and manufacturers around the world so if you have a detailed drawing of a part you can manufacture it anywhere in the world. We are going to practice such a drawing here. I have designed a gear coupling in my previous works as solidworks assembly tutorial. Here we are going to make a drawing of one part of the coupling which is shown below: Suppose that we want to manufacture this part. We need to give a detailed drawing to the manufacturer and all of his questions must be answered by the drawing so that he can produce the part with no problem. Let s get the job done 1
3 First of all you need to design the part and have the 3d model ready. I have done it for you and all you need is to download the sample part. Open the part in solidworks. It s easy to start the drawing, just navigate to the file> make drawing from part and click on it: Configure the sheet format/size: 2
4 And now we are ready to do the drawing. A drawing should define all the aspects of a part and this is what we are going to do. There is a view palette on the right side of your screen. Drag the front view from this palette and release it in the drawing: Projected view window is now open on the property manager. Move your cursor downward and click again for another view and click ok: 3
5 We are going to set the major dimensions of the part. Navigate to the annotation tab and click on the smart dimension button. Setting the dimensions in the drawing is just like seeting the dimensions in the part (3d-design mode) so if you have ever designed a part then you should know how to deal with it. anyway, reach to the bottom line and click on it and click on the sheet for setting the dimension: Continue to Set the dimensions like what is shown below. Remember when want to set the dimensions between two lines you should select them one after another: These are the major dimensions of our part. Now the manufacturer knows the main size of the product. 4
6 What about the holes? We will take care of them now. Fisrt of all specify the diameter of the main circles: A pattern of similar holes is a common concept in mechanical parts so we just need to specify diameter and number the holes and we can use datum feature for this purpose. Click on the daum feature button: Datum feature window appears in the property manager. Click on the more button on the text section: 5
7 Type what you see in the box. Use the symbols section for the symbol of diameter: Click ok. now the text will be inserted beside the datum mark wherever we choose to. Click on one of the holes and place the datum then click the ok button. 6
8 This is what we have provided so far: Now the manufacturer knows the main dimensions of the part and holes but what about the teeth inside the part. Take another look at the first picture: 7
9 We must find a way to show him the internal details.first we give him a section cut this way he will understand the part better. So click on the section view button on the view layout toolbar and check the auto start section view button in the section view window: When you move your cursor in the sheet a cutting line will show up: Place this line right in the middle of the front view and click then drag the mouse to the right and click again for creating the section view: now the manufacturer recognises the internal view but he still cant make it because the dimensions are not there. 8
10 If we look at this part from behind we can see the details of teeth so we are going to insert the back view. click on the view palette on the right of your screen and drag the back view into the sheet: 9
11 The back view is inserted now. First of all add these two dimensions to the drawing because they are not visible any hwere else: As you can see the teeth are so small in back view and we cant specify the details so we need to magnify them somehow. detail view will do the job for us. Choose it from the view layout tab: Draw the circle on the top tooth of back view. place the detial view under the back view: 10
12 The detail view is still small so change the scale to 3:1 in the detail view window: Now we should give some information about the tooth details. We use note to give these information.click on it in the view layout toolbar. Then click on the tooth in the detail view and type the information: Now all the detials of the part are clear for the manufacturer. 11
13 You can add a isometric view too just for beautification.here is our drawing: We have been editing the sheet so far but the title table (lower right corner) needs to be edited too. So navigate to the edit>sheet format and select the menu item. Now you can edit the table: You can add the name of the company, the name of drafter,materials, date,edition version and etc.. here. 12
14 After that navigate to the edit>sheet and select it again. Now your drawing is ready and you can send it to the manufacturer: M.Ghasemi 13
Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School
Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,
More informationLab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
More informationToothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationQuick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
More informationSolidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial 3d sketch project A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m we will create this frame during the tutorial : In this tutorial
More informationDEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY CAPSULE PROGRAM Funded by NSF grant #0833636 Tutorial 02 3D Part Modeling SolidWorks 2010 Copyright 2010 Prof. Zeid 3D Part Modeling
More informationStarting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
More informationAutoDesk Inventor: Creating Working Drawings
AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working
More informationHow to Make Drawings. 4. Open the part in SolidWorks, click on File, and then click on Make Drawing From Part.
How to Make Drawings 1. SVN Update (go to the topmost 2011 folder, right click, and go down to SVN update). This will download all of the drawings done by other people to your computer, as well as update
More informationSolidWorks Tutorial 1. Axis
SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to
More informationWhen you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. create an engineering drawing file using the management file menu. 2. dimension the engineering file using the drawing annotation menu. 3. produce
More informationCreating DXF Files For The Waterjet
Creating DXF Files For The Waterjet 2D CAD Files For Your Gear Pumps By Martin L. Culpepper CONTENTS: I. Introduction...... 2 II. Software For Creating DXF Files....... 2 III. What Is Required.... 2 IV.
More informationMAKING THE FAN HOUSING
Our goal is to make the following part: 39-245 RAPID PROTOTYPE DESIGN CARNEGIE MELLON UNIVERSITY SPRING 2007 MAKING THE FAN HOUSING This part is made up of two plates joined by a cylinder with holes in
More informationAUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
More informationAppendix R5 6. Engineering Drafting. Broken View
Updating Using Autodesk Inventor to Release 5 Appendix R5 6 Engineering Drafting Chapter 6 delineates the concepts of engineering drafting. You output orthographic views from solid parts and orthographic
More informationEXERCISE ONE: BEACH BUGGY.
EXERCISE ONE: BEACH BUGGY. Prerequisite knowledge Students should have completed Exercises from the file: Introduction to Assemblies Concept Mates Focus of lesson Commands Used This lesson will focus on
More informationg. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
More informationSolidworks Tutorial Pencil
The following instructions will be used to help you create a Pencil using Solidworks. These instructions are ordered to make the process as simple as possible. Deviating from the order, or not following
More informationSolidWorks Navigation
SolidWorks Basics SolidWorks Navigation Command Bar Feature Tree Model Window Simple Box Select the Front plane Create a new sketch Create a Center Rectangle from the origin Smart Dimension the length
More informationModeling an Airframe Tutorial
EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If
More informationRelease Highlights for BluePrint-PCB Product Version 1.8
Release Highlights for BluePrint-PCB Product Version 1.8 Introduction BluePrint Version 1.8 Build 341 is a rolling release update. BluePrint rolling releases allow us to be extremely responsive to customer
More informationCube in a cube Fusion 360 tutorial
Cube in a cube Fusion 360 tutorial n Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually being done in the software. Click to link to the video tutorial.
More informationModeling Basic Mechanical Components #1 Tie-Wrap Clip
Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely
More informationForeword. If you have any questions about these tutorials, drop your mail to
Foreword The main objective of these tutorials is to give you a kick start using Solidworks. The approach to write this tutorial is based on what is the most important knowledge you should know and what
More informationIntroduction to 3D Printing. Activity 1: Design a keychain using computer-aided design software
Introduction to 3D Printing Activity 1: Design a keychain using computer-aided design software 1 In this activity we ll design a keychain name tag and learn the fundamentals of computer-aided design, the
More informationF1 in Schools Tutorial 1 A Step by Step Guide To Drawing a. Bloodhound Block In SolidWorks
F in Schools Tutorial A Step by Step Guide To Drawing a Bloodhound Block In SolidWorks There are 7 Achievement Points to Collect During This Tutorial! Requirements: SolidWorks Student Edition or SolidWorks
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationWorking With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
More informationAnchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
More informationfor Solidworks TRAINING GUIDE LESSON-9-CAD
for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationExcel Lab 2: Plots of Data Sets
Excel Lab 2: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationExcel Tool: Plots of Data Sets
Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and
More informationJ. La Favre Fusion 360 Lesson 2 April 19, 2017
In this lesson, you will create a round plate with 12 counter-bored holes to fit 6-32 socket head screws. A counter-bored hole has two diameters, one to fit the threaded part of the screw and the other
More informationDraw IT 2016 for AutoCAD
Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...
More informationPull Down Menu View Toolbar Design Toolbar
Pro/DESKTOP Interface The instructions in this tutorial refer to the Pro/DESKTOP interface and toolbars. The illustration below describes the main elements of the graphical interface and toolbars. Pull
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationDigital Camera Exercise
Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document
More informationAssignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
More informationSolidWorks 103: Barge Design Challenge
SolidWorks 103: Barge Design Challenge Note: This tutorial was created using SolidWorks 2009. If you are using another version of SolidWorks, you may notice some variation in display states and configuration.
More informationNX 7.5. Table of Contents. Lesson 3 More Features
NX 7.5 Lesson 3 More Features Pre-reqs/Technical Skills Basic computer use Completion of NX 7.5 Lessons 1&2 Expectations Read lesson material Implement steps in software while reading through lesson material
More informationName: Date Completed: Basic Inventor Skills I
Name: Date Completed: Basic Inventor Skills I 1. Sketch, dimension and extrude a basic shape i. Select New tab from toolbar. ii. Select Standard.ipt from dialogue box by double clicking on the icon. iii.
More informationGetting Started. Right click on Lateral Workplane. Left Click on New Sketch
Getting Started 1. Open up PTC Pro/Desktop by either double clicking the icon or through the Start button and in Programs. 2. Once Pro/Desktop is open select File > New > Design 3. Close the Pallet window
More informationAssignment 5 CAD Mechanical Part 1
Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started
More informationF1 in Schools Tutorial 3 A Step by Step Guide To Drawing an. F1 Block In SolidWorks
F in Schools Tutorial A Step by Step Guide To Drawing an F Block In SolidWorks There are 7 Achievement Points to Collect During This Tutorial! Requirements: SolidWorks Student Edition or SolidWorks Design
More informationBottom Rail. Chapter 2. Chair. A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. B. 3D Sketch.
Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click
More informationEG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
More informationTo start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
More informationSolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
More informationDatum Tutorial Part: Cutter
Datum Tutorial Part: Cutter Objective: Learn to apply Datums in different ways Directions 1. Datum Axis Creation a. First we need to create a center axis for the cutter b. Model Tab > Datum > Select Axis
More informationAssembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:
MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing
More informationEngineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
More informationUsing Siemens NX 11 Software. Sheet Metal Design - Casing
Using Siemens NX 11 Software Sheet Metal Design - Casing Based on a YouTube NX tutorial 1. 1 https://www.youtube.com/watch?v=-siyi1vz87k A&M CAD in mechanical engineering 1 1 Introduction. Start NX 11
More informationChair. Bottom Rail. on the Command Manager. on the Weldments toolbar.
Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click
More informationSession 3: Getting to Know Photoshop Elements. Keep in mind that there are many others ways of solving the problems.
Tutorial Session 3: Getting to Know Photoshop Elements Now that you have taken some pictures you might have noticed that some of the images have little problems like red-eye, colorcast, and too dark or
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationDrafting: A Hands-on Experience
Steve Webb Field Support Applications Engineer Drafting: A Hands-on Experience Solid Edge University 2014 May 12-14, Atlanta, GA, USA SOLID EDGE UNIVERSITY 2014 Re-imagine What s Possible #SEU14 Agenda
More informationSolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
More informationSolidWorks Training. Introductory course for staff and students from the School of Physics and Astronomy
SolidWorks Training Introductory course for staff and students from the School of Physics and Astronomy i) Introductory presentation SolidWorks Training ii) The SolidWorks GUI The SolidWorks Graphical
More informationActivity 7.1 More Dimensioning
Activity 7.1 More Dimensioning Introduction The basic standard dimensioning method established by the American National Standards Institute and the American Society of Mechanical Engineers (ANSI or ASME)
More informationNut and Bolt Tutorial
Thread Representations Nut and Bolt Tutorial Parts to a Thread Thread Dimensioning Major Diameter Thread Series (IE UNC, UNF, ACME, etc) ½ - 13 UNC 2 A or B A = External B = Internal Threads per Inch Class
More informationIntroduction to 3D CAD with SolidWorks. Jianan Li
Introduction to 3D CAD with SolidWorks Jianan Li Create a New Part The first time you launch SolidWorks, it asks you to set the default units and dimension standard. Make sure you have IPS and ANSI selected,
More informationLesson 6: Drawing Basics
6 Lesson 6: Drawing Basics Goals of This Lesson Understand basic drawing concepts. Create detailed drawings of parts and assemblies:. Before Beginning This Lesson Create Tutor1 and Tutor2 parts and the
More informationWhen you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationTutorial 1 getting started with the CNCSimulator Pro
CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro
More informationCertified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
More informationHow to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
More informationCreo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
More informationCreo Extrude Tutorial 3: Hole, Fillets and Rounds
Creo Extrude Tutorial 3: Hole, Fillets and Rounds By: Matthew Jourden Brighton High School 1. Open Creo Parametric 2. File > Open > extrudetutorial (From Creo Extrude Tutorial 1) NOTE: Minimum of 2 other
More informationCAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
More informationTable of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationDrawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationGetting Started. with Easy Blue Print
Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the
More informationPart 2: Earpiece. Insert Protrusion (Internal Sketch) Hole Patterns Getting Started with Pro/ENGINEER Wildfire. Round extrusion.
Part 2: Earpiece 4 Round extrusion Radial pattern Chamfered edge To create this part, you'll use some of the same extrusion techniques you used in the lens part. The only difference in this part is that
More informationRelease Highlights for BluePrint-PCB Product Version 2.0.1
Release Highlights for BluePrint-PCB Product Version 2.0.1 Introduction BluePrint Version 2.0.1 is a rolling release for BluePrint V2.0. BluePrint rolling releases are delivered as needed and allow us
More informationAEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
More information2. Creating and using tiles in Cyberboard
2. Creating and using tiles in Cyberboard I decided to add some more detail to the first hexed grip map that I produced (Demo1) using the Cyberboard Design program. To do this I opened program by clicking
More informationFull Section Tutorial Creating a Part
Full Section Tutorial Creating a Part 1. Create a block with the following measures a. Length=4.00 b. Depth=4.00 c. Height= 2.00 2. Place a Counterbore hole on the top view at the center of the block with
More informationPro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
More informationRecitation 2 Introduction to Photoshop
Recitation 2 Introduction to Photoshop What is Adobe Photoshop? Adobe Photoshop is a tool for creating digital graphics either by starting with a scanned photograph or artwork or by creating the graphics
More informationSiemens NX11 tutorials. The angled part
Siemens NX11 tutorials The angled part Adaptation to NX 11 from notes from a seminar Drive-to-trial organized by IBM and GDTech. This tutorial will help you design the mechanical presented in the figure
More informationWelcome to Weebly. Setting up Your Website. Write your username here:
Welcome to Weebly Setting up Your Website Write your username here: You will need to remember enter this username each time you log in, so you may want to write it somewhere else that is safe and easy
More information8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
More informationCreate a Flowchart in Word
Create a Flowchart in Word A flowchart is a diagram of steps, movements or actions involved in a system or activity. Flowcharts use conventional geometric symbols and arrows to define relationships and
More informationScribble Maps Tutorial
Scribble Maps Tutorial Go to the homepage of Scribble Maps here: h t t p : / / w w w. s c r i b b l e m a p s. c o m / Getting to know the Interface Scribble Maps is a free online mapping application with
More informationVeerapandian.K Mechanical Engg Vedharanyam A manual to mechanical designers How Solid works Works?
Compiled by Veerapandian.K Mechanical Engg Vedharanyam-614 810 A manual to mechanical designers How Solid works Works? Solid works Overview Solid works main idea is user to create drawing directly in 3D
More informationLesson 10: Loft Features
10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student
More informationCopyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 1
Copyright by J.W. Zuyderduyn www.yachttutorial.com - How To Model a Yacht in SolidWorks? Page 1 Copyright by J.W. Zuyderduyn www.yachttutorial.com - How To Model a Yacht in SolidWorks? Page 2 Download
More informationBasics Pictures Media Bar
Basics 1 The right pictures can make your publication stand out from the crowd. In this tutorial, we ll show you how to: Add and replace pictures. Use the Media Bar. Pan, zoom, and crop pictures. Apply
More informationUCL Depthmap 7: Axial Line Analysis
UCL Depthmap 7: Axial Line Analysis Version 7.12.00c Outline This section explains how to import an which has been saved in DXF format. The DXF is just a line drawing, so it must be converted to an axial
More informationUser Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
More information2809 CAD TRAINING: Part 1 Sketching and Making 3D Parts. Contents
Contents Getting Started... 2 Lesson 1:... 3 Lesson 2:... 13 Lesson 3:... 19 Lesson 4:... 23 Lesson 5:... 25 Final Project:... 28 Getting Started Get Autodesk Inventor Go to http://students.autodesk.com/
More informationEvaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
More informationHow to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
More informationAlibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
More information