GD&T Administrator Manual v 1.0

Size: px
Start display at page:

Download "GD&T Administrator Manual v 1.0"

Transcription

1 The GD&T Professional Edition GD&T Administrator Manual v Effective Training Inc.

2 Introduction to the GD&T Administrator s Manual There are two Administration programs included with the GD&T Trainer Professional Edition: the GD&T Administrator and the GD&T Reporter. The GD&T Administrator is used to add/delete students and to change course and lesson options. The GD&T Reporter is used to track student progress and to generate various reports and graphs. More information about these programs will be discussed throughout this manual. All of the student, lesson, and course information is stored in a single Microsoft Access database (.mdb) file. This GD&T Trainer database file can be opened in Microsoft Access, but it is not recommended. It is password protected and should only be opened with the Administrator and Reporter programs. The Administrator is used to edit information in the GD&T Trainer database file, whereas the Reporter is only used to view and print out specific information from the database. Unlike the GD&T Trainer PE, the Administrator and Reporter programs were not developed by Effective Training Inc. They are third party programs that are part of a product called the TBK Tracker. The TBK Tracker provides powerful and secure student/course management for computer-based training (CBT) applications. It was developed by Platte Canyon Multimedia Corporation and is used to manage the courses and the students using the GD&T Trainer PE. Since the TBK Tracker s Administrator and Reporter programs are used to help manage other CBT applications besides the GD&T Trainer, there are many features and options that are not used by the GD&T Trainer PE. These features and options will be mentioned in the upcoming chapters of 56

3 Table of Contents Introduction Page 1 Chapter 1 Overview of the Features in the GD&T Administrator Page 4 Chapter 2 Changing the Administrator Password Page 9 Chapter 3 Editing the Database Page 11 Chapter 4 Modifying Students Page 12 Chapter 5 Modifying Lessons Page 26 Chapter 6 Modifying Courses Page 33 Chapter 7 Modifying Classes Page 42 Chapter 8 Modifying Global Settings Page 51 Chapter 9 Modifying Companies Page 54 Chapter 10 Administrator Online Help Page of 56

4 Chapter 1 Overview of the Features in the GD&T Administrator This chapter covers a basic overview of the features in the Administrator program. It will discuss logging onto the Administrator program and give an explanation of each of the buttons on the main menu bar, the pull-down menus, and the keyboard shortcut keys used to access different areas of the Administrator program. 1. Administrator Overview: The GD&T Administrator has many course management features used in the GD&T Trainer PE. It can be used to: Add/Delete Students Change minimum passing test scores for lessons Allow open enrollment for courses Assign students to particular courses only Assign students into particulars groups called classes Add additional data fields to the student login screens Set an automatic time out for lessons These features will be covered in more detail in later chapters. 2. Logging Onto the GD&T Administrator: To open the GD&T Administrator program, double-click the GD&T Administrator icon: This icon is located on the desktop and also in the program folder group in the Windows Start Menu. In the multi-user version of the GD&T Trainer PE, the icon is located in the Administration folder group of the GD&T Trainer PE folder group in the Windows Start Menu. In the concurrent LAN version of the GD&T Trainer PE, the icon is located in the GD&T Trainer PE - Administration folder group in the Windows Start Menu. When you first open the GD&T Administrator program, you will be prompted to enter the administrator password before entering the program of 56

5 The default password is master (without the quotation marks). The password is not case sensitive. The default password is also located in the GD&T Administration Read Me First text file in the GD&T Trainer PE folder group in the Windows Start Menu. 3. Multiple Administrators (LAN versions only): If a concurrent LAN version of the GD&T Trainer PE was purchased, then the GD&T Administrator programs allow multiple administrators to view the GD&T Trainer database at the same time. This is allowed because all of the GD&T Trainer application and runtime files (including the database) are stored on the Network share drive. The GD&T Administrator and Reporter programs reside on the administrator s local hard drive and not the network drive. The administrator who opens the GD&T Administrator program first will have access to edit the GD&T Trainer database. If other administrators open the GD&T Administrator program on their machines, they will have read only access, until the first administrator exits the program of 56

6 4. Main Menu Bar: After entering the administrator password, the next screen that will appear is the main menu bar. This bar has 14 buttons that are divided into 8 categories: settings. Administrator Settings change the administrator password and edit the database Modify Students add/delete students, enter additional information for a student and assign students to a course or class. Modify Lessons change the minimum passing test score for a lesson. Modify Courses change course options, such as open enrollment courses, requiring a password to enter a course, and setting an option to return to the last page visited when re-entering a course. The administrator can also add classes and/or students to a course. Modify Classes create classes (categories containing courses and students). Global Settings set up a default setting for courses, such as open enrollment, return to last page visited, and password required. The administrator can also setup an automatic time out for lessons and add additional data fields for student login screens. Modify Companies create companies, another way to categorize students and courses. Online Help access online help for the GD&T Administrator. This manual s contents are also found in the Online Help section of 56

7 5. Pull-Down Menus: There are four pull-down menus that allow access to the same 14 buttons available on the main menu bar. 6. Keyboard Shortcuts: There are 12 keyboard shortcut keys that also allow access to the 14 buttons on the main menu bar. The keyboard shortcut keys are listed to the right of the items in the pull-down menus of 56

8 7. Exiting the Administrator: There are two ways to exit the GD&T Administrator program. The first is to click on the Windows close box located in the upper right corner of the Administrator s main menu bar. Exit Button The second way to exit the program is to choose the Exit item in the File pull-down menu. After you select one of the exit options, you will see a dialogue box asking if you really want to exit. Click Yes to exit or click No to remain in the GD&T Administrator program of 56

9 Chapter 2 Changing the Administrator Password Each time you open the GD&T Administrator, you will be prompted to enter your password. Because the program can be used to add/delete students and change lesson/course options, it is password protected and only accessible to administrators of the GD&T Trainer PE. As mentioned in Chapter 1, Section 2, the default password for the GD&T Administrator is master. It is recommended that you change the administrator password the first time you open the GD&T Administrator. There are three ways to change the administrator password: 1. Click the on the main menu bar. 2. Select Change Administrator Password from the File pull-down menu. 3. Press the F2 shortcut key. The Change Administrator Password window appears. The cursor will appear in the top text field. Type your new password in this field. The password can be any combination of numbers and/or characters, and it is not case sensitive. After typing, press the TAB key to navigate to the bottom text field and retype it. The first entry creates your new password; the second verifies it into the system of 56

10 Once you have entered your new password in the text fields, click the OK button to change the administrator password. If you click the Cancel button, the administrator password will not be changed. Once you have changed the administrator password, the next time you open the GD&T Administrator, your new administrator password will in effect. The button is used to access the Online Help section for the Change Administrator Password window. It explains the same procedure for changing the administrator password as described in this chapter. Note: The administrator password is very important and should be kept in a secure place. If this password is ever misplaced or forgotten, ETI must be contacted to reset it of 56

11 Chapter 3 Editing the Database WARNING This feature is not used in the GD&T Administrator Program!! The Edit Database feature in the GD&T Administrator is used to edit the database settings or to select a different database for the Administrator program. As mentioned in the beginning of this manual, the Administrator program is part of the TBK Tracker which has additional features and options that are not used in the GD&T Trainer PE. It is recommended that you do not make any or changes or open the Edit Database window. If you choose to continue, there are three ways to access the Edit Database window: 1. Click the on the main menu bar. 2. Select Edit Database from the File pull-down menu. 3. Press the F3 shortcut key. Remember: This feature is not used in the GD&T Administrator nor is it supported by Effective Training Inc. If you make any changes in this window, it will affect how the database is used by the GD&T Trainer PE. If the GD&T Trainer database is accidentally deleted using the Edit Database feature, the link to the database will be broken and the GD&T Trainer PE and/or the Administrator will need to be re-installed, depending on which version of the GD&T Trainer PE was purchased of 56

12 Chapter 4 Modifying Students The Modify Students category allows the administrator to add/delete students, reassign student passwords, enter additional student information and assign students to a course or class. Up to 2000 students can be included in this database. The two buttons used in this category are: Modify Students used to access the Modify Students window Modify Students in Expert Mode used to access the Student Editor - Expert window. These buttons offer two different methods for editing student information. 1. Modify Students Window: The first method used to edit student information is the Modify Students window. There are three ways to access the Modify Students window: 1. Click the on the main menu bar. 2. Select Students from the Modify pull-down menu. 3. Press the F5 shortcut key of 56

13 After using one of these access methods, the Modify Students screen appears. In the Modify Students screen, you can do the following tasks: Add one student at a time Add multiple students through a batch import process Delete a student Assign a class to a student Assign a course to a student Reassign a student password of 56

14 Screen layout: This screen is divided into four sections: Student List, Student Information, Additional Student Login Information, and Course/Class Listings. These sections are identified in the figure below. Student Listing Student Login Information Student Information Class / Course Listing The top portion of the Modify Students window explains the icons of 56

15 The Student Listing section lists all of the students registered in the GD&T Trainer by last name, first name. You can navigate through the different students by clicking on the student s name or by using the left or right navigation arrows in the student navigation bar. The left and right arrows navigate between students. The first student button navigates to the first student (at the top of the list), and the last student button the bottom of the list). navigates to the last student (at When a student is selected, his or her name will be highlighted and a right arrow will be shown in the Student Listing section to the left of the Last Name column. Detailed student information will also appear in the Student Information and Student Login Information sections of 56

16 The Student Information section lists detailed information about the student selected in the Student Listings section. This information is optional This section includes detailed student information, such as company, department, social security number, telephone, address, and fax number. This information is optional and does not need to be entered for each student. If you wish to enter or edit information in any of these categories, click in the appropriate field next to that item. You can also use the TAB key on the keyboard to navigate to the other category fields. The figure below shows an example of entering information in the Telephone # field. The Company field is a pull-down menu. When you click on it, a menu appears showing the different companies available to assign to the student. To add a company to the list, click the button to the right of the company field. When you click the button, the Modify Companies screen appears of 56

17 This screen allows you to add or delete a company, or to edit a selected company s information. This screen will be explained in more detail in Chapter 9. When a company is added, it will show up in the Company pull-down menu. The Student Login Information section allows additional information to be requested by the student during the login process. This information can include: Encrypted Password, Identifier 1, Identifier 2, Identifier 3, and Pager Number. See the figure below of 56

18 The Encrypted Password field displays the encrypted password (encrypted) that the students uses to login to the GD&T Trainer. It also allows the student password to be changed or cleared. Adding, changing and deleting the student s password will be discussed later in this chapter. The Identifier 1, Identifier 2, and Identifier 3 fields are used to store additional student information that is not listed in the other categories. Examples of this type of information can be Employee ID # and Exempt/Non-Exempt. By default, Identifier 1 has been used for the field Hourly/Salary. The Pager Number field is just another category that information can be entered into for a student. The last section of the Modify Students windows is the Class/Course Listings section. This section has three categories: Classes Included In, Courses Registered In Directly, and Classes Registered In Via Class. The Class/Course Listings section is shown in the figure below. The Classes Included In category allows a student to be assigned to a class or classes. A class is a classification, or a way of categorizing courses and students. Classes are optional and are not required for each student of 56

19 To assign classes to a student, click the following screen appears. button. When this button is clicked the To assign a class or classes to a student, click the box to the left of the classification name. A checkmark appears in each box. When finished, click the Student window. button to save your changes and exit the Assign Classes to If you want to exit without saving the change, click the button. By default there are no classes already created in the GD&T Administrator Program. It is up to the administrator to create and assign students to classes. Creating classes is discussed in more detail in Chapter of 56

20 The Courses Registered In Directly category allows a student to be assigned to a course or courses. By default there are three pre-defined courses in the GD&T Trainer. These courses are the GD&T Fundamentals Class, GD&T Fundamentals Seminar and the GD&T Certification Test. Open enrollment (discussed in Chapter 6) is setup by default for each of these courses. However, it may be that the administrator wishes to only have a student or students access one or more courses instead of accessing all three courses. To assign course to a student, you need to click the screen appears. button. The following To assign a course or courses to a student, click the box to the left of each name. A checkmark appears in each box. When finished, click the button to save your changes and exit the Assign Courses to Student window. To exit without saving changes, click the button. To allow a student access to a particular course(s) only, you must set the Open Enrollment option to False in the Modify Courses screen. See Chapter 6 for more details of 56

21 The Courses Registered In Via Class category displays courses that are included in the class shown in the Classes Included In category. For more information on assigning a course to a class, see Chapter 6. Adding a Single Student To add a student in the Modify Students window, click the button located at the bottom of the window. Enter the student s first and last name into the Student Information section. After entering the student s first name, the TAB key on the keyboard can be used to navigate to other fields to enter information about the student. After a student s first and last names are typed into the appropriate fields, the student will show up in the Student Listing section. When adding a student, it is only necessary to type the first and last names. All of other information about the student (such as company, department, telephone number, etc.) is optional and doesn t need to be entered into the student and login information sections. Note: Two students with the same name will receive different student ID numbers of 56

22 Adding / Changing / Reassigning the Student s Password By default, each course in the GD&T Trainer requires that a student enter his or her password for course access.the student s encrypted password is stored in the GD&T Trainer database file, but it can be changed or cleared in the Student Login Information section in the Modify Students window. Note: If a student loses a password, you can reassign one, even if the student originally selected his or her own password. Simply create a new password for the student. To create or edit a student s password, click the The Set Student Password window appears. button to the right of the Encrypted Password field. This window allows the administrator to create a new password for the student or to clear the student s current password. To create a password, type the new password in the top text field and retype it in the bottom text field to verify it. As the password is typed, each letter will be shown as asterisks. See the figure below. After typing the password in both fields, click the the Set Student Password window. button to save your password and exit If you want to exit without saving changes, click the button. To clear a student s password, click the text fields. button. This will erase the password typed in both of 56

23 After entering a password for a student, the password will show up as asterisks in the Student Login Information section. When adding a student, it is not necessary to create a password for that student. If the Password Required option is set to True in the Modify Courses screen (Chapter 6), then the student will be prompted to create a new password the first time he/she logs in to a course in the GD&T Trainer. Batch Import of Students When adding students, it is possible to add a number of students at one time instead of adding each student one at a time. This can be done by importing a group (or batch) of students from a delimited text file of a defined format. An example of the defined format that must be used in a delimited text file is shown below. LastName FirstName MiddleInitial Identifier1 Identifier2 Identifier3 SocialSecurityNumber CompanyID* Department TelephoneNumber FaxNumber Telephone2 CellPhone Pager The batch import file can have any delimiter, but it must contain all the data specified above. The pipe ( ) character is used as a delimiter in the example above, but other delimiters (such as TAB) work as well. Optional pieces of information such as Identifier1 should be left blank if not needed. However, you still need to keep their position in the row. * The CompanyID field has special logic. If you leave it blank, Administrator program will insert the Default Company defined in the Administrator program. If you specify a number, then the number must be the existing CompanyID for the desired company. If you specify text, then the Administrator program will look up the appropriate CompanyID for that company name. If one doesn't exist, then the Administrator program will add that company to the database. To import a batch of students from a delimited text file, click the button located on the bottom of the Modify Students screen. After clicking this button, a series of dialogue boxes will guide you through importing your text file. For more information on performing a batch import of students, please refer to the online help. Closing the Modify Students Screen: There are two ways to exit the Modify Students screen: Click the Windows close box located in the upper right corner of the screen or click the button in the bottom right corner of the screen. Exit Button of 56

24 Student Editor - Expert Mode The second method used to edit student information is using the Student Editor Expert Mode window. There are three ways to access the window: 1. Click the button on the main menu bar. 2. Select Students from the Expert pull-down menu. 3. Press the Shift+F5 shortcut keys. When you use one of these methods to access the Student Editor Expert Mode window, the screen below appears. All of the student and login information categories that are in the Modify Students window are also available in this Student Editor - Expert Mode window. The layout of this window is similar to a spreadsheet, and it is used to add students more efficiently than the Modify Students window of 56

25 Adding Students in the Student Editor - Expert Mode To add a student, click the button. The words <Add First Name> will appear in the First Name column and the words <Add Last Name> will appear in the Last Name column. Click on the words <Add First Name> in the First Name column and type in the student s first name. Press the TAB key on the keyboard to navigate to the last name field and type in the student s last name. Press the TAB key to continue entering information in the other columns. When finished, click the button to add another student or click the button to exit the Student Editor Expert window. As with the Modify Students window, the only information needed to add a student is their first and last name. All of the other student information is optional and doesn t need to be entered. Deleting Students in the Student Editor - Expert Mode To delete a student, click in the column to the left of the First Name column in the row where the student s name is listed. Online Help Online help is also available from the Modify Students and Modify Students Expert Mode screens. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the button in the upper right corner of the screen of 56

26 Chapter 5 Modifying Lessons The Modify Lessons category allows the administrator to change the minimum passing score for a lesson. You may also set permission for students to return to the last page accessed before exiting a lesson. There are two buttons in this category: The Modify Lessons button is used to access the Modify Lessons window. The Modify Lessons in Expert Mode button is used to access the Lessons Editor - Expert window. This window is not available in this version of the GD&T Administrator, so the Modify Lessons in Expert Mode button is disabled. There are three ways to access the Modify Lessons window: 1. Click the button on the main menu bar. 2. Select Lessons from the Modify pull-down menu. 3. Press the F6 shortcut key of 56

27 After using one of these access methods, the Modify Lessons screen appears. In the Modify Lessons screen you can change the minimum passing score for a lesson of 56

28 Screen layout: This screen is divided into three sections: Lesson Listing, Lesson Information, and Lesson Settings. These sections are identified in the figure below. Lesson Information Lesson Listing The top portion of the Modify Lessons window explains the icons. Lesson Settings of 56

29 The four courses available in the GD&T Trainer are the GD&T Certification Test, the Fundamentals of GD&T Class, the Fundamentals of GD&T Seminar, and the GD&T Skills Survey. Each course contains lessons. These lessons are actual Toolbook files that are installed on your computer or LAN, depending on which version of the GD&T Trainer that was purchased. The Lesson Listing section lists all of the lessons that are available in the GD&T Trainer in alphabetical order. There are a total of 58 lessons. You can navigate through the different lessons by clicking on the lesson name or on the left or right navigation arrows in the lesson navigation bar. The left and right arrows navigate between lessons. The first lesson button navigates to the first lesson (at the top of the list). The last lesson button navigates to the last lesson (at the bottom of the list). When a lesson is selected, the lesson name is highlighted and a right arrow is displayed in the Lesson Listing section to the left of the Lesson Name column. Detailed lesson information will also appear in the Lesson Information and the Lesson Settings sections. The Lesson Information section lists detailed information about a selected lesson, including the lesson name and description of 56

30 The fields for Location and CD Name do not apply to any of the lesson for the courses in the GD&T Trainer and should not be edited. If information is entered in any of these fields it could alter the way the lessons are accessed in the GD&T Trainer. The field labeled Ini File Location to Override Database shows the location of the lesson that is installed on a local computer or LAN drive. The Lesson Settings section lists detailed settings for a selected lesson. The only setting that may be changed in this section is the Minimum Test Score. This will be discussed in the next section. Warning: All of the other settings should not be changed. These include: Completion Method, Store Question Log, Store ASYM_BeenHere, Skip Return to Last Page Visited, Prevent Favorites in Lesson, and Skip View Question Log. The settings for each lesson were applied when the course was developed and there are some settings in this section that don t apply to the lessons. If any of these settings are changed, it could have an effect on how the lesson functions in the GD&T Trainer of 56

31 Lessons Associated With Each Course Below is a listing of each course included in the GD&T Trainer with its associated lessons: Fundamentals of GD&T Class Dimensions & Drawings Key Terms Modifiers & Symbols GD&T Rules GD&T Concepts Flatness Straightness Circularity Cylindricity Planar Datums Datum Targets Size Datums (RFS) Size Datums (MMC) Orientation Controls Perpendicularity Angularity Parallelism Position Introduction Position RFS/MMC/LMC Position Special Applications Fastener Formulas Concentricity Symmetry Circular Runout Total Runout Introduction to Profile Profile of a Surface Profile of a Line Final Exam Fundamentals of GD&T Seminar Dimensions & Drawings - Seminar Perpendicularity - Seminar Key Terms - Seminar Angularity - Seminar Modifiers & Symbols - Seminar Parallelism - Seminar GD&T Rules - Seminar Position Introduction - Seminar GD&T Concepts - Seminar Position RFS/MMC/LMC - Seminar Flatness - Seminar Position Special Applications - Seminar Straightness - Seminar Fastener Formulas - Seminar Circularity - Seminar Concentricity - Seminar Cylindricity - Seminar Symmetry - Seminar Planar Datums - Seminar Circular Runout - Seminar Datum Targets - Seminar Total Runout - Seminar Size Datums (RFS) - Seminar Introduction to Profile - Seminar Size Datums (MMC) - Seminar Profile of a Surface - Seminar Orientation Controls - Seminar Profile of a Line - Seminar GD&T Skills Survey Skills Survey GD&T Certification Test Certification Test of 56

32 Setting Lesson Minimum Passing Score The lessons in the Fundamentals of GD&T Class course include quizzes that are scored upon completion. A minimum passing score must be achieved in order to pass each quiz and proceed to the next lesson. The default minimum passing score is 70%. The lessons in the Fundamentals of GD&T Seminar course do not include quizzes or a final exam. These lessons are completed upon visiting all of the pages in the lesson; therefore, there is no minimum passing score required. The lessons in the Global Dimensioning and Tolerancing Addendum course include quizzes that are scored upon completion. A minimum passing score must be achieved in order to pass each quiz and proceed to the next lesson. The default minimum passing score is 70%. The GD&T Certification Test has a minimum passing score of 90%. NOTE: The screen for Lesson Editor Expert is not used in the GD&T Administrator Online Help Online help is also available from the Modify Lessons screen. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the in the upper right corner of the screen. button of 56

33 Chapter 6 Modifying Courses The Modify Courses category allows the administrator to set open enrollment to a course, enable/disable password at student login, set return to last page visited for a course, and assign classes and students to a course. There are two buttons in this category: The Modify Courses button is used to access the Modify Courses window. The Modify Courses in Expert Mode button is used to access the Course Editor - Expert window. This window is not available in this version of the GD&T Administrator, so the Modify Courses in Expert Mode button is disabled. There are three ways to access the Modify Courses window: 1. Click the button on the main menu bar. 2. Select Courses from the Modify pull-down menu. 3. Press the F7 shortcut key of 56

34 After using one of these access methods, the Modify Courses screen appears. In the Modify Courses category, you can: Set open enrollment to a course Enable/disable password at student login Set return to last page visited for a course Assign classes to a course Assign students to a course of 56

35 Screen layout: This screen is divided into four sections: Course Listing, Course Information, Student Password Settings, and Lesson Sequence Settings. These sections are identified in the figure below. Course Information Lesson Sequence Settings Course Listing Student Password Settings The top portion of the Modify Courses window explains the icons of 56

36 Options not used in the GD&T Trainer PE NOTE: The screen for Course Editor Expert is not used in the GD&T Administrator of 56

37 There are four courses available in the GD&T Trainer: the Certification Test, the Fundamentals of GD&T Class, the Fundamentals of GD&T Seminar, and the GD&T Skills Survey. The Course Listing section lists all of the courses that are available in the GD&T Trainer in alphabetical order. You can navigate through the different lessons by clicking on the lesson name or on the left or right navigation arrows in the course navigation bar. The left and right arrows navigate between courses. The first course button navigates to the first course (at the top of the list). The last course button navigates to the last course (at the bottom of the list). When a course is selected, the course name is highlighted and a right arrow is displayed in the Course Listing section to the left of the Course Name column. Detailed course information will also appear in the Course Information and the Course Settings sections of 56

38 The Course Information section lists detailed information about a selected course, including the course name and description. The field for Results is optional. It may be filled in with the administrator s address. When a student selects to send his or her results, this is the address that will receive the report. The HTTP Post URL is not used in the GD&T Trainer PE. The Course Settings section lists detailed settings for a selected course. 1. Setting open enrollment to a course The administrator may choose to have any student select from any course, or to limit the courses available to students at the log in screen. To choose open enrollment for any course, simply highlight that course and choose True in the dropdown menu next to the Open Enrollment field name. The other options in the dropdown menu include, False and Use Globals. Select False to close enrollment in a course. Choosing Use Globals will select whatever choices were set up in the Global Settings. To see what global settings are in effect for all courses, click the Global Settings button at the bottom right section of the screen. (More about global settings will be discussed in Chapter 8.) 2. Enabling/disabling password at student login Follow the same procedure as above for enabling or disabling password requirements at student login. Click on the dropdown menu next to the Password Required field and select your preferred option. Choosing Use Globals will select whatever choices were set up in the Global Settings. To view what settings are in effect for all courses, click the Global Settings button at the bottom right section of the screen. (More about global settings will be discussed in Chapter 8.) of 56

39 3. Setting return to last page visited for a course If a student stops working in the middle of a lesson, the administrator can choose what will occur when the student resumes work. You may want the student to begin the lesson again from the start, or you may prefer to have the student resume where at the last completed lesson page. Following the same procedure as above, click on the dropdown menu next to the Return to Last Lesson Page field. Choose True to allow the student to resume where he/she left off. Choose False to require the student to restart the full lesson. Choosing Use Globals will select whatever choices were set up in the Global Settings. To see what settings are in effect for all courses, click the Global Settings button at the bottom right section of the screen. (More about global settings will be discussed in Chapter 8.) 4. Assigning classes to a course The Modify Courses section allows the administrator to select which classifications and/or students may take a particular course. Select the course you wish to modify from the Course List. In the bottom half of the screen, the lessons in the course are displayed in the first column of 56

40 To assign a particular class (or classification) of students to this course, click the Assign Classes to Course button. A window will open that displays all of the classifications available. Simply select the checkbox to the left of the class name(s). In this case, designers has been selected. A Yes will appear in the Assigned column next to the class or classes chosen. Choose save and close, or cancel to close without changing the selection of 56

41 5. Assigning students to a course The Modify Courses section allows the administrator to select which classifications may take a particular course. Select the course you wish to modify from the Course List. In the bottom half of the screen, the lessons in the course are displayed in the first column. To assign students to this course, click the Assign Students to Course button. A window will open that displays all of the students available. Simply select the checkbox to the left of the student name(s). A Yes will appear in the Assigned column next to the name or names chosen. Choose save and close, or cancel to close without changing the selection. Online Help Online help is also available from the Modify Courses screen. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the in the upper right corner of the screen. button of 56

42 Chapter 7 Modifying Classes The Modify Classes category allows the administrator to create classes and assign students and courses to a class. A class is classification, or a way of categorizing students and courses. For example: you can setup classes for engineers, designers, manufacturing, etc. and have certain courses assigned to that particular classification. The two buttons used in this category are: Modify Classes used to access the Modify Classes window. Modify Classes in Expert Mode used to access the Class Editor Expert window. 1. Modify Classes Window The first method used to edit class information is the Modify Classes window. There are three ways to access the Modify Classes window. 1. Click the on the main menu bar. 2. Select Classes from the Modify pull-down menu. 3. Press the F8 shortcut key of 56

43 After using one of these access methods, the Modify Classes screen appears. In the Modify Classes category, you can: Assign students to a classification Assign courses to a classification of 56

44 Screen layout: This screen is divided into four sections: Class Listing, Class Information, Assign Students, and Assign Courses. These sections are identified in the figure below. Class Listing Class Information Assigning Students Section Assigning Courses Section The top portion of the Modify Classes window explains the icons of 56

45 1. Assigning students to a class The Modify Classes section allows the administrator to assign students to a particular classification. Select the course you wish to modify from the Class List. Any information about the selection is displayed in the Class Information section to the right of the class list of 56

46 To assign a student or students to a particular class (or classification), click the Assign Students to Class button. A window will open that displays all of the students available. Simply select the checkbox to the left of the student name(s). A Yes will appear in the Member column next to the student(s) chosen. Choose save and close, or cancel to close without changing the selection of 56

47 The student(s) selected will appear in the Students Assigned to Selected Class section of 56

48 1. Assigning courses to a class The Modify Classes section allows the administrator to assign courses to a particular classification. Select the course you wish to modify from the Class List. Any information about the selection is displayed in the Class Information section to the right of the class list of 56

49 To assign a course or courses to a particular class (or classification), click the Assign Courses to Class button. A window will open that displays all of the courses available. Simply select the checkbox to the left of the course name(s). A Yes will appear in the Member column next to the student(s) chosen. Choose save and close, or cancel to close without changing the selection of 56

50 The student(s) selected will appear in the Students Assigned to Selected Class section. Explanation of the Class Editor Expert screen The Class Editor - Expert screen has the same functionality and options as the Modify Classes screen. It is in a tabular layout for quickly adding classes. Online Help Online help is also available from the Modify Students and Modify Students Expert Mode screens. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the button in the upper right corner of the screen of 56

51 Chapter 8 Modifying Global Settings The Modify Global Settings category allows the administrator to set a number of Global or default settings used in the Modify Courses screen. When a global setting is selected for any option, it is the default setting used in the GD&T Administrator. There are three ways to access the Modify Global Settings window. 1. Click the on the main menu bar. 2. Select Global Settings from the Modify pull-down menu. 3. Press the F9 shortcut key. After using one of these access methods, the Modify Global Settings screen appears of 56

52 In the Modify Classes category, you can: Set up a default setting for courses, such as open enrollment, return to last page visited, and password required Set up an automatic time out for lessons Add additional data fields for student login screens Options not used in Screen layout: the GD&T Trainer PE From this screen, the administrator can set up additional logon data that will be recorded the first time a student logs into a course. For example, you can request that the student enters his/her department, social security number, cell phone, address or fax number as part of the login process. You can also create three additional pieces of information for the user to enter called Identifiers. For example, Employee ID# could be an identifier. By default, Identifier 1 has been used for the field Hourly/Salary. You can have up to 5 pieces of additional logon information (besides the password) that the student needs to enter prior to selecting a course. Note: This additional logon information is only asked for the first time a student logs on to the GD&T Trainer PE. The next time the student logs on, he/she will not be asked this information again of 56

53 Logon Data Captions and Tooltips When additional logon information is filled in, as the student logons, he or she will see a tooltip popup that gives more details about what information is being requested. The labels created by Platte Canyon are backwards. The caption you want displayed at the top of the tooltip should be entered in the Logon Data 1 Tooltip field, and the tooltip should be typed into the Logon Data 1 Caption field. Online Help Online help is also available from the Modify Global Settings screen. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the button in the upper right corner of the screen of 56

54 Chapter 9 Modifying Companies This category is used to add a company into the GD&T Administrator. A company is another way of categorizing student and course information. If you have the GD&T Trainer PE installed at one company location, with students accessing the sofware from different locations, each location can be set up as a company. The two buttons used in this category are: Modify Companies used to access the Modify Companies window. Modify Companies in Expert Mode used to access the Class Editor Expert window. 1. Modify Companies Window The first method used to edit class information is the Modify Companies window. There are three ways to access the Modify Companies window. 1. Click the on the main menu bar. 2. Select Companies from the Modify pull-down menu. 3. Press the F4 shortcut key of 56

55 After using one of these access methods, the Modify Global Settings screen appears. In the Modify Companies category, you can create companies, which is another way to categorize students and courses To create companies, simply select the Add Company button and fill in the fields. To delete a company, select the Delete Company button. Explanation of the Companies Editor Expert screen The Companies Editor - Expert screen has the same functionality and options as the Modify Companies screen. It is just in a tabular layout for quickly adding companies. Online Help Online help is also available from the Modify Global Settings screen. Everything that was discussed in this chapter can also be looked up in the Online Help section. To access the online help, click the button in the upper right corner of the screen of 56

56 Chapter 10 Administrator Online Help This Online Help screen provides detailed instructions for all of the information in the GD&T Administrator. There is a question mark button in the upper right corner of each screen of the GD&T Administrator that also accesses the online help screen of 56

Effective Training Inc. Aug 2009

Effective Training Inc. Aug 2009 User Manual 1 Trademark Acknowledgements The GD&T Trainer Professional Edition is a trademark of Effective Training Inc. This product is authored using Toolbook Instructor from SumTotal Systems and Flash

More information

GD&T Reckoner Course reference material for. A Web-based learning system from.

GD&T Reckoner Course reference material for. A Web-based learning system from. GD&T Reckoner Course reference material for A Web-based learning system from This is not the complete document. Only Sample pages are included. The complete document is available to registered users of

More information

Progeny Imaging Veterinary

Progeny Imaging Veterinary Progeny Imaging Veterinary User Guide V1.14 and higher 00-02-1605 Rev. K1 ECN: ECO052875 Revision Date: 5/17/2017 Contents 1. About This Manual... 6 How to Use this Guide... 6 Text Conventions... 6 Getting

More information

Hyperion System 9 Financial Data Quality Management. Quick Reference Guide

Hyperion System 9 Financial Data Quality Management. Quick Reference Guide Hyperion System 9 Financial Data Quality Management Quick Reference Guide Hyperion FDM Release 9.2.0. 2000 2006 - Hyperion Solutions Corporation. All rights reserved. Hyperion, the Hyperion logo and Hyperion

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

RESTAURANT MANAGEMENT for WINDOWS. GIFT CARD Version

RESTAURANT MANAGEMENT for WINDOWS. GIFT CARD Version RESTAURANT MANAGEMENT for WINDOWS GIFT CARD Version 5.53.00 Introduction Overview What Profitek Gift Card Does? The Profitek Gift Card program will allow you to offer your customers a way of purchasing

More information

Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring User Guide

Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring User Guide Timekeeper/Statistical tool for Basketball Sponsor: Prof. Wayne Dyksen & MSU Basketball Team Spring 2004 User Guide Team 2 Edward Bangs Bryan Berry Chris Damour Kim Monteith Jonathan Szostak 1 Table of

More information

nvision Actuals Drilldown (Non-Project Speedtypes) Training Guide Spectrum+ System 8.9 November 2010 Version 2.1

nvision Actuals Drilldown (Non-Project Speedtypes) Training Guide Spectrum+ System 8.9 November 2010 Version 2.1 nvision Actuals Drilldown (Non-Project Speedtypes) Training Guide Spectrum+ System 8.9 November 2010 Version 2.1 Table of Contents Introduction. Page 03 Logging into Spectrum.Page 03 Accessing the NVision

More information

RosterPro by Demosphere International, Inc.

RosterPro by Demosphere International, Inc. RosterPro by INDEX OF PAGES: Page 2 - Getting Started Logging In About Passwords Log In Information Retrieval Page 3 - Select Season League Home Page Page 4 - League Player Administration Page 5 - League

More information

Using the Desktop Recorder

Using the Desktop Recorder Mediasite Using the Desktop Recorder Instructional Media publication: 09-Students 9/8/06 Introduction The new Desktop Recorder from Mediasite allows HCC users to record content on their computer desktop

More information

Progeny Imaging. User Guide V x and Higher. Part Number: ECN: P1808 REV. F

Progeny Imaging. User Guide V x and Higher. Part Number: ECN: P1808 REV. F Progeny Imaging User Guide V. 1.6.0.x and Higher Part Number: 00-02-1598 ECN: P1808 REV. F Contents 1 About This Manual... 5 How to Use this Guide... 5 Text Conventions... 5 Getting Assistance... 6 2 Overview...

More information

Educational Technology Lab

Educational Technology Lab Educational Technology Lab National and Kapodistrian University of Athens School of Philosophy Faculty of Philosophy, Pedagogy and Philosophy (P.P.P.), Department of Pedagogy Director: Prof. C. Kynigos

More information

Physical Inventory System User Manual. Version 19

Physical Inventory System User Manual. Version 19 Physical Inventory System User Manual Version 19 0 Physical Inventory System User Manual 1 Table of Contents 1. Prepare for Physical Inventory... 2. Chapter 1: Starting Inventory... 2.1. CDK/ADP... 3.

More information

Kodiak Corporate Administration Tool

Kodiak Corporate Administration Tool AT&T Business Mobility Kodiak Corporate Administration Tool User Guide Release 8.3 Table of Contents Introduction and Key Features 2 Getting Started 2 Navigate the Corporate Administration Tool 2 Manage

More information

How to create a survey with SurveyMonkey

How to create a survey with SurveyMonkey How to create a survey with SurveyMonkey Click the green +Create Survey button from the My Surveys page or from the top-right corner from wherever you are on the Survey Monkey website. You will see 3 options:

More information

DEVELOPING THE WORKFORCE

DEVELOPING THE WORKFORCE DEVELOPING THE WORKFORCE Assessing the quality of death certification: Instructions for the online assessment tool Resources and Tools 3 November 2016 About this series Capacity-building resources and

More information

surescan Online Help

surescan Online Help surescan Online Help Table of Contents About surescan Online Help...1 Getting Started with surescan...2 Exit surescan...2 Main Menu...3 Main Toolbar...4 Main Toolbar Icons...4 Start a New Patient Record...6

More information

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning

More information

User Guide V10 SP1 Addendum

User Guide V10 SP1 Addendum Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or

More information

Click here to give us your feedback. New FamilySearch Reference Manual

Click here to give us your feedback. New FamilySearch Reference Manual Click here to give us your feedback. New FamilySearch Reference Manual January 25, 2011 2009 by Intellectual Reserve, Inc. All rights reserved Printed in the United States of America English approval:

More information

Scorer with BridgePads Quick Guide to Teams Scoring

Scorer with BridgePads Quick Guide to Teams Scoring December 2013, Scorer 14 Scorer with BridgePads Quick Guide to Teams Scoring These instructions a short guide to Teams scoring. Only the most common functions are covered. For details on more advanced

More information

Table of Contents. Chapter 1: Software Installation...1. Chapter 2: Running the Software II. Daily Practical Operation...10

Table of Contents. Chapter 1: Software Installation...1. Chapter 2: Running the Software II. Daily Practical Operation...10 Product Manual Table of Contents Chapter 1: Software Installation.................................1 Chapter 2: Running the Software............................... 2 I. The Initial Defining in Lock Management

More information

LIGHT STUDIO 485. Software Instrrctions Mancal. Read trhe mancal tarefclly before operaing trhis software

LIGHT STUDIO 485. Software Instrrctions Mancal. Read trhe mancal tarefclly before operaing trhis software LIGHT STUDIO 485 Software Instrrctions Mancal Read trhe mancal tarefclly before operaing trhis software PSI, spol. s r. o., Drásov 470, 664 4 Drásov, Czeth Repcblit FAX: +40 5 440 90, TEL: +40 5 440 0,

More information

Geometry Controls and Report

Geometry Controls and Report Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for

More information

Try what you learned (and some new things too)

Try what you learned (and some new things too) Training Try what you learned (and some new things too) PART ONE: DO SOME MATH Exercise 1: Type some simple formulas to add, subtract, multiply, and divide. 1. Click in cell A1. First you ll add two numbers.

More information

CHAPTER 18 DOCUMENT IMAGING MODULE 18.0 OVERVIEW 18.1 REQUIREMENTS AND INSTALLATION Special Requirements Mapping Network Drive

CHAPTER 18 DOCUMENT IMAGING MODULE 18.0 OVERVIEW 18.1 REQUIREMENTS AND INSTALLATION Special Requirements Mapping Network Drive EXTENDED SERVICE OPTIONS CHAPTER 18 18.0 OVERVIEW Collection agencies frequently require the ability to save documents related to collection efforts. For example, agencies doing commercial collections

More information

AutoCAD Civil 3D 2009 ESSENTIALS

AutoCAD Civil 3D 2009 ESSENTIALS AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

SIMS Autumn Census COMPLETION Document for Primary Schools

SIMS Autumn Census COMPLETION Document for Primary Schools SIMS Autumn Census COMPLETION Document for Primary Schools Census Day 4 th October 2018 1 Contents Overview... 3 Census Flow Chart... 4 Completion Document... 5 Check SIMS Version... 5 SIMS Backup... 6

More information

Field Device Manager Express

Field Device Manager Express Honeywell Process Solutions Field Device Manager Express Software Installation User's Guide EP-FDM-02430X R430 June 2012 Release 430 Honeywell Notices and Trademarks Copyright 2010 by Honeywell International

More information

Sheet Metal Punch ifeatures

Sheet Metal Punch ifeatures Lesson 5 Sheet Metal Punch ifeatures Overview This lesson describes punch ifeatures and their use in sheet metal parts. You use punch ifeatures to simplify the creation of common and specialty cut and

More information

Example Application C H A P T E R 4. Contents

Example Application C H A P T E R 4. Contents C H A P T E R 4 Example Application This chapter provides an example application of how to perform steady flow water surface profile calculations with HEC-RAS. The user is taken through a step-by-step

More information

Solving tasks and move score... 18

Solving tasks and move score... 18 Solving tasks and move score... 18 Contents Contents... 1 Introduction... 3 Welcome to Peshk@!... 3 System requirements... 3 Software installation... 4 Technical support service... 4 User interface...

More information

SIMS Autumn Census COMPLETION Document for Primary Schools

SIMS Autumn Census COMPLETION Document for Primary Schools SIMS Autumn Census COMPLETION Document for Primary Schools Census Day 5 th October 2017 1 Contents Overview... 3 Census Flow Chart... 5 Preparation Document... 6 Check SIMS Version... 6 SIMS Backup...

More information

Go Daddy Online Photo Filer

Go Daddy Online Photo Filer Getting Started and User Guide Discover an easier way to share, print and manage your photos online! Online Photo Filer gives you an online photo album site for sharing photos, as well as easy-to-use editing

More information

How to Build a LimeSurvey: The Basics for Beginners

How to Build a LimeSurvey: The Basics for Beginners 1 How to Build a LimeSurvey: The Basics for Beginners Login and view a list of your surveys. We will give you 3 templates to start with. These are the ethics compliant templates you need to protect participant

More information

Website Link

Website Link Employee Timesheet Guide Website Link Lumina System: https://secure.entertimeonline.com/ta/965.login Web Clock: https://secure.entertimeonline.com/ta/965.clock Contents Website Link... 1 Clocking In or

More information

FAQ for City of Tacoma employees

FAQ for City of Tacoma employees General: How do I update my contact information (address, phone number, email address)? How do I change my password? Forgot password Forgot username How do I favorite or bookmark the login page? Can I

More information

DocuSign Setup Admin. DocuSign User Setup Process Overview. Setting up a new DocuSign user

DocuSign Setup Admin. DocuSign User Setup Process Overview. Setting up a new DocuSign user DocuSign Setup Admin DocuSign User Setup Process Overview 1) CORE-CT Security receives request to set up new supplier contract document creator 2) CORE-CT security team sets up Roles for the User 3) DocuSign

More information

Digital Photo Guide. Version 8

Digital Photo Guide. Version 8 Digital Photo Guide Version 8 Simsol Photo Guide 1 Simsol s Digital Photo Guide Contents Simsol s Digital Photo Guide Contents 1 Setting Up Your Camera to Take a Good Photo 2 Importing Digital Photos into

More information

Super HUD- User Guide

Super HUD- User Guide - User Guide From Poker Pro Labs Version - 2 1. Introduction to Super HUD... 1 2. Installing Super HUD... 2 3. Getting Started... 7 3.1 Don t have an Account?... 8 3.2 Super HUD Membership(s)... 9 4. Super

More information

Introduction to: Microsoft Photo Story 3. for Windows. Brevard County, Florida

Introduction to: Microsoft Photo Story 3. for Windows. Brevard County, Florida Introduction to: Microsoft Photo Story 3 for Windows Brevard County, Florida 1 Table of Contents Introduction... 3 Downloading Photo Story 3... 4 Adding Pictures to Your PC... 7 Launching Photo Story 3...

More information

Flex Contracts for Full Time and Hourly/Overload Assignments

Flex Contracts for Full Time and Hourly/Overload Assignments Flex Contracts for Full Time and Hourly/Overload Assignments Dates to remember: Submit Your Proposed Contract by: Friday, March 16, 2012 Completed Contracts due by: Wednesday, May 16, 2012 With this new

More information

Hyperion System 9 Financial Data Quality Management

Hyperion System 9 Financial Data Quality Management Hyperion System 9 Financial Data Quality Management Administrator Training Guide WebLink Version 8.3, 8.31, and Hyperion System 9 Financial Data Quality Management Version 9.2.0 Hyperion Financial Management

More information

The Revolve Feature and Assembly Modeling

The Revolve Feature and Assembly Modeling The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Author Tutorial for OPTE Editorial Manager System

Author Tutorial for OPTE Editorial Manager System CONTENTS Registration/Login/Password... 2 Edit Account Information... 5 Track Manuscript Status... 15 Submit Revised Manuscript... 16 View Manuscript Decision... 21 Registration/Login/Password In order

More information

Switching to Sub Category and Collapsible Skins

Switching to Sub Category and Collapsible Skins Switching to Sub Category and Collapsible Skins New programming enhancements and features are not compatible with the older Q-Net skins. If you are using either the original Drop Down skin or the Standard

More information

Kaseya 2. User Guide. Version 7.0

Kaseya 2. User Guide. Version 7.0 Kaseya 2 vpro User Guide Version 7.0 May 30, 2014 Agreement The purchase and use of all Software and Services is subject to the Agreement as defined in Kaseya s Click-Accept EULATOS as updated from time

More information

Game Design Curriculum Multimedia Fusion 2. Created by Rahul Khurana. Copyright, VisionTech Camps & Classes

Game Design Curriculum Multimedia Fusion 2. Created by Rahul Khurana. Copyright, VisionTech Camps & Classes Game Design Curriculum Multimedia Fusion 2 Before starting the class, introduce the class rules (general behavioral etiquette). Remind students to be careful about walking around the classroom as there

More information

SCHEDULE USER GUIDE. Version Noventri Suite Schedule User Guide SF100E REV 08

SCHEDULE USER GUIDE. Version Noventri Suite Schedule User Guide SF100E REV 08 SCHEDULE USER GUIDE Version 2.0 1 Noventri Suite Schedule User Guide SF100E-0162-02 REV 08 Table of Contents 1. SCHEDULE... 3 1.1 Overview... 3 1.2 Start SCHEDULE... 3 1.3 Select Project... 4 1.4 Select

More information

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals

More information

Copyright 2014 SOTA Imaging. All rights reserved. The CLIOSOFT software includes the following parts copyrighted by other parties:

Copyright 2014 SOTA Imaging. All rights reserved. The CLIOSOFT software includes the following parts copyrighted by other parties: 2.0 User Manual Copyright 2014 SOTA Imaging. All rights reserved. This manual and the software described herein are protected by copyright laws and international copyright treaties, as well as other intellectual

More information

Warehouse Instruction Guide

Warehouse Instruction Guide Warehouse Instruction Guide Review Equipment & Supplies page 2 Set-Up Access Point page 6 Register Scanners page 8 Place Fixture Stickers/Enter Ranges page 10 Scanning Basics and Additional Keyboard Functions

More information

< The Family Demographics table contains the family demographic data, including home address and phone number

< The Family Demographics table contains the family demographic data, including home address and phone number The Church Executive Family Demographics Introduction Index Introduction... 1 Definitions... 2 Drop-down Lists... 3 User-defined fields... 4 Procedure... 5 Fields... 6 Family Members... 9 The Family Demographics

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Learn PowerPoint 2010

Learn PowerPoint 2010 Table of Contents Chapter 1 Introduction Introduction...4 Chapter 2 PowerPoint 2010 Basics Introduction to PowerPoint 2010 Basics...5 Start and Exit...6 PowerPoint 2010 Window...7 The Ribbon...9 The Backstage:

More information

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax: Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013

More information

Apple Photos Quick Start Guide

Apple Photos Quick Start Guide Apple Photos Quick Start Guide Photos is Apple s replacement for iphoto. It is a photograph organizational tool that allows users to view and make basic changes to photos, create slideshows, albums, photo

More information

NX 7.5. Table of Contents. Lesson 3 More Features

NX 7.5. Table of Contents. Lesson 3 More Features NX 7.5 Lesson 3 More Features Pre-reqs/Technical Skills Basic computer use Completion of NX 7.5 Lessons 1&2 Expectations Read lesson material Implement steps in software while reading through lesson material

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Geometric Dimensioning & Tolerancing

Geometric Dimensioning & Tolerancing Western Technical College 31420350 Geometric Dimensioning & Tolerancing Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Recognition

More information

The lump sum amount that a series of future payments is worth now; used to calculate loan payments; also known as present value function Module 3

The lump sum amount that a series of future payments is worth now; used to calculate loan payments; also known as present value function Module 3 Microsoft Excel Formulas Made Easy Key Terms Term Definition Introduced In Absolute reference A cell reference that is fixed to a specific cell and contains a constant value throughout the spreadsheet

More information

Term Definition Introduced in:

Term Definition Introduced in: 60 Minutes of Access Secrets Key Terms Term Definition Introduced in: Calculated Field A field that displays the results of a calculation. Introduced in Access 2010, this field allows you to make calculations

More information

CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise

CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise CHM 109 Excel Refresher Exercise adapted from Dr. C. Bender s exercise (1 point) (Also see appendix II: Summary for making spreadsheets and graphs with Excel.) You will use spreadsheets to analyze data

More information

RAZER CENTRAL ONLINE MASTER GUIDE

RAZER CENTRAL ONLINE MASTER GUIDE RAZER CENTRAL ONLINE MASTER GUIDE CONTENTS 1. RAZER CENTRAL... 2 2. SIGNING IN... 3 3. RETRIEVING FORGOTTEN PASSWORDS... 4 4. CREATING A RAZER ID ACCOUNT... 7 5. USING RAZER CENTRAL... 11 6. SIGNING OUT...

More information

METRO TILES (SHAREPOINT ADD-IN)

METRO TILES (SHAREPOINT ADD-IN) METRO TILES (SHAREPOINT ADD-IN) November 2017 Version 2.6 Copyright Beyond Intranet 2017. All Rights Reserved i Notice. This is a controlled document. Unauthorized access, copying, replication or usage

More information

My Blogs: To Add New Blog Post: o Click on the My Learn360 link. You will then see eight different tabs (below).

My Blogs: To Add New Blog Post: o Click on the My Learn360 link. You will then see eight different tabs (below). My Blogs: Every user on Learn360 is given one blog. A blog can be shared throughout Learn360 and there is no limit to the number of blog posts. Blogs are a great way for teachers to interact with students

More information

[Version 2.0; 9/4/2007]

[Version 2.0; 9/4/2007] [Version 2.0; 9/4/2007] MindPoint Quiz Show / Quiz Show SE Version 2.0 Copyright 2004-2007 by FSCreations, Inc. Cincinnati, Ohio ALL RIGHTS RESERVED The text of this publication, or any part thereof, may

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Inventory Manual. Version 3. Hart ID = Have a question? Call Hart Client Care at , or us at

Inventory Manual. Version 3. Hart ID = Have a question? Call Hart Client Care at , or  us at Version 3 Hart ID = 924-01 Inventory Manual Review Equipment & Supplies page 2 About Hart Scanners page 4 Register Scanners page 6 Place Fixture Stickers page 8 Enter Sticker Ranges page 14 Scanning Basics

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

Creo Extrude Tutorial 2: Cutting and Adding Material

Creo Extrude Tutorial 2: Cutting and Adding Material Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following

More information

Generations Automatic Stand-Alone Lace By Bernie Griffith Generations Software

Generations Automatic Stand-Alone Lace By Bernie Griffith Generations Software We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A

More information

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch

More information

For Students: Review and Renew your Accommodations Letter

For Students: Review and Renew your Accommodations Letter For Students: Review and Renew your Accommodations Letter The following are instructions on how to review and renew your Accommodation Letters. It is important to know that you need to generate your letter

More information

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing

More information

Fotini. Software User s Guide

Fotini. Software User s Guide Fotini Software User s Guide Table of Contents What is Fotini? How is Fotini set up on my computer? Getting Started How do I? Start the program End the program Open an album See photo details Move to the

More information

Excel Tool: Plots of Data Sets

Excel Tool: Plots of Data Sets Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and

More information

FLIR Tools for PC 7/21/2016

FLIR Tools for PC 7/21/2016 FLIR Tools for PC 7/21/2016 1 2 Tools+ is an upgrade that adds the ability to create Microsoft Word templates and reports, create radiometric panorama images, and record sequences from compatible USB and

More information

Star Defender. Section 1

Star Defender. Section 1 Star Defender Section 1 For the first full Construct 2 game, you're going to create a space shooter game called Star Defender. In this game, you'll create a space ship that will be able to destroy the

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Appendix A. Selected excerpts from behavior modeling session Examples of training screens

Appendix A. Selected excerpts from behavior modeling session Examples of training screens Appendix A Selected excerpts from behavior modeling session Examples of training screens Selected Excerpts from Behavior Modeling tape...now, given that we ve talked about how we can use Solver, let s

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

PLA Planner Student Handbook

PLA Planner Student Handbook PLA Planner Student Handbook TABLE OF CONTENTS Student Quick Start Guide PLA Planner Overview...2 What is PLA Planner?...4 How do I access PLA Planner?...4 Getting to Know PLA Planner Home...5 Getting

More information

Quick Start Guide for the PULSE PROFILING APPLICATION

Quick Start Guide for the PULSE PROFILING APPLICATION Quick Start Guide for the PULSE PROFILING APPLICATION MODEL LB480A Revision: Preliminary 02/05/09 1 1. Introduction This document provides information to install and quickly start using your PowerSensor+.

More information

Create styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.

Create styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing. NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives

Autocad Basics 7/28/2009. Chapter 14 - Learning Objectives Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Existing and Design Profiles

Existing and Design Profiles NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles

More information

Network Scanner Guide for Fiery S300 50C-KM

Network Scanner Guide for Fiery S300 50C-KM Network Scanner Guide for Fiery S300 50C-KM Read this manual before printing. Keep readily available for reference. User's Guide Introduction Thank you very much for purchasing the Fiery S300 50C-KM. This

More information

<Insert Picture Here> Using ERPi for EBS/FDM Data Loads into HFM

<Insert Picture Here> Using ERPi for EBS/FDM Data Loads into HFM Using ERPi for EBS/FDM Data Loads into HFM Wayne Paffhausen Senior Technical Support Engineer Program Agenda Create a Link inside of ERPi to the HFM Application Create an Import Format

More information

User Manual. VingCard VISIONLINE. Version

User Manual. VingCard VISIONLINE. Version User Manual VingCard VISIONLINE Version 1.12.0 Table of contents 1. ABOUT VISIONLINE... 5 1.1 AUTOMATIC ONLINE OPERATIONS... 5 1.2 TO START THE SOFTWARE... 5 1.3 GENERAL ABOUT THE VISIONLINE SOFTWARE (VERSION

More information

Assignment 5 due Monday, May 7

Assignment 5 due Monday, May 7 due Monday, May 7 Simulations and the Law of Large Numbers Overview In both parts of the assignment, you will be calculating a theoretical probability for a certain procedure. In other words, this uses

More information

for Microsoft Dynamics CRM r3.0 On-Premise Installation Instructions

for Microsoft Dynamics CRM r3.0 On-Premise Installation Instructions formicrosoftdynamicscrm r3.0 On-Premise Installation Instructions September 2009 www.crm.hoovers.com/msdynamics TableofContents Before You Begin...3 First Time Installing Access Hoover s...3 Updating Access

More information

Step By Step Instructions for Registering Students Online In Skyward

Step By Step Instructions for Registering Students Online In Skyward Step By Step Instructions for Registering Students Online In Skyward This guide will help you to register your students online in Skyward, Tri-Creek School Corporation s new student management system.

More information