Index Index *asmdot, 6-66 *sldlfp, 3-34 *sldprt, 3-34 *stl, 6-83, 10-4.drwdot, 4-20.prtdot, 2-11.slddrw, 4-25.sldprt, D Printing, Point A

Transcription

1 *asmdot, 6-66 *sldlfp, 3-34 *sldprt, 3-34 *stl, 6-83, 10-4.drwdot, 4-20.prtdot, 2-11.slddrw, 4-25.sldprt, D Printing, Point Arc Sketch tool, D ContentCentral, 2-8, MMCAPSCREW, MMCAPSCREW Part, FBM8, 4-72 A ABS, Add Derived Configuration, 7-63 Add Dimension, 2-26, 2-27, 2-29 Add File Location - Design Library, 3-33 Add Ins, 8-5 Additive Manufacturing, 10-1 Add Revision - Drawing, 4-60 Advanced Mate, 3-17 Angle Mate, 3-18, 3-96 Distance Mate, 3-17, 3-94 Mate Alignment option, 3-18 Linear/Linear Coupler Mate, 3-17 Path Mate, 3-17 Symmetric Mate, 3-17 Width Mate, 3-17 Advanced Mode - New Document, 2-27 Along A Vector, 9-26 Angle mate, 3-17, 3-96 Angular Dimension, 2-71, 5-29 ANGULAR Tolerance, 4-15 Animate Exploded view, 3-55 Animation - edrawing, 6-84 Animation Controller, 3-55 Annotation tools, 4-48 Balloons, 4-69 Bill of Materials, 4-71 Center Mark, 4-48 Centerline, 4-48 Insert Magnetic line, 4-70 Note, 4-57 Annotations - Drawing, 4-10 Annotations folder, 7-32 ANSI - Drafting Standard, 2-10, 2-11 ANSI - IPS Assembly Template, 6-66 ANSI - MMGS Assembly Template, 6-66 Appearance Callout tool, 7-27 Appearance, 1-29, 2-65 Appearances Command, 2-65, 5-56 Apply Fixtures, 8-10 Apply Loads, 8-10 Arc Condition - Drawing, 4-52 ASM-IN-ANSI, 6-72 ASM-MM-ANSI, 7-12 ASM-MM-ISO Assembly Template, 6-67 Assembly - Fixed Component, 3-9 Assembly - Float Component, 3-9 Assembly FeatureManager Syntax, 3-13 Assembly Modeling Approach, 3-5 Assembly Template, 6-65 Assembly Tool, 3-9 Collision Detection, 3-30 Exploded View, 3-51 Pattern Driven Component, 3-63 Insert Component, 3-9, 3-11, 6-67 Insert Components, 6-71 Mate, 6-73, 6-75, 6-78 Rotate Component, 3-24, 3-33, 6-79 View Mates, 3-27 Assembly Visualization, 9-32 Auto Balloon Annotation tool, 4-69 Auxiliary View - Drawing, 4-29, 4-30 B B Landscape size Drawing Template, 4-5 Balloon - Drawing, 4-69 B-ANSI-MM, 4-20, 4-23 B-ANSI-MM, 4-68 Basic FEA Concepts, 8-1 Base Feature, 2-14, 2-16, 2-29 Base Sketch, 2-16, 2-17, 2-22 BATTERANDPLATE Sub-assembly, 6-70 Insert BATTERY Part, 6-70 Insert BATTERYPLATE Part, 6-71 BATTERY Part, 5-15 Extruded Base Feature, 5-19 Extruded Boss Feature, 5-26 INDEX - 1

2 Extruded Cut Feature, 5-23, 5-24 Fillet Feature, 5-21 Measure Tool, 5-30 Second Fillet Feature, 5-25 BATTERYPLATE Part, 5-33 Extruded Boss Feature, 5-36 Fillet feature, 5-37 Offset Entities, 5-36 Save As Command, 5-34 Bends PropertyManager, Bill of Materials - Drawing, 4-71 Binary.stl file, 6-84, 10-4 Binder Clip Assembly, 3-84 Blind - End Condition, 2-29, 2-56, 6-23 Boss-Extrude PropertyManager, 2-29, 5-19 Bottom-up Assembly Modeling, 3-5, 3-6 Boundary Condition, 8-4 BOX Assembly Overview, 7-8, 7-13 Box-Select, 2-54 BRACKET Part, 7-89 Base Flange/Tab Feature, 7-90 Edge Flange Feature, 7-93 Extruded Cut Feature, 7-92 In-Context Feature, 7-91 Mirror Component Feature, 7-98, Miter Flange Feature, 7-95 BULB Part, 5-57 Circular Pattern Feature, 5-64, 5-67 Dome Feature, 5-63 Extruded Cut Feature, 5-66 Revolved Base Feature, 5-59, 5-60 Revolved Cut Thin Feature, 5-61 Spline Feature, 5-61 C CABINET Part, 7-37 Additional Pattern Options, 7-60 Edge Flange Feature, 7-42, 7-44 Extruded Base Feature, 7-39 Extruded Cut Feature, 7-59 Flat State Feature, 7-42, 7-44, 7-62 Formed state Feature, 7-62 Fully formed state Feature, 7-42, 7-44 Hem Feature, 7-43 Hole Wizard Feature, 7-45, 7-46 Insert Bends Feature, 7-41 Linear Pattern Feature, 7-45, 7-47 Linear Pattern Sketch, 7-57 Louver Forming Feature, 7-53 Manufacturing Considerations, 7-54 RIP Feature, 7-40 Sheet Metal Drawing, 7-64 Sheet Metal Library Feature, 7-49 Shell Feature, 7-39 Sketch Driven Pattern Feature, 7-61 Cam Mate, 3-18 CAPANDLENS Sub-assembly, 6-72 Insert LENSANDBULB Assembly, 6-73 Insert LENSCAP Sub-assembly, 6-72 Insert ORING Part, 6-72 Center of Mass (COM), 3-78, Center Mark Drawing tool, 4-48 Center Mark PropertyManager, 4-48, 4-49 Center Rectangle Sketch tool, 5-18, 6-15 Centerline Drawing tool, 4-48 Centerline Sketch tool, 2-70, 3-40, 4-34 Centerpoint Arc Sketch tool, 5-51 Chamfer Feature, 2-51, 2-52, 3-42 Angle distance, 2-51 Distance distance, 2-51 Vertex, 2-51 Chamfer PropertyManager, 2-52, 3-43 Circle Sketch tool, 2-36, 2-77 Circular Pattern Feature, 5-64, 5-67 C-Landscape, 7-64 Clear All Filters Command, 3-24, 3-26, 6-69 Clearance Fit, 3-48 Close All Command, 2-12, 3-8 Close Profile, 4-33 Closed Contour, 7-25, 7-29 Coincident Mate, 3-16, 3-25, 3-37, 6-68 Coincident Relation, 2-49, 2-55, 5-50, 6-48 Coincident Sketch Relation, 2-49 Coincident SmartMate, 3-44 Coincident/Concentric SmartMate, 3-45 Collinear Relation, 4-34 Collision Detection tool, 3-30 Color tool, 2-65, 7-27 Color, 2-65 CommandManager, 1-19 Assembly Document, 1-21 Custom tab, 1-20 Dock above Dock left Dock right Drawing Document, 1-20 Part Document, 1-19 Component Properties, 3-15 Fixed sign, 3-15 Minus sign, 3-15 INDEX - 2

3 None, 3-15 Plus sign, 3-15 Question Mark, 3-15 Conic Sketch Entity, Component State, 3-14 Hidden, 3-14 Lightweight, 3-14 Out-of-Date Lightweight, 3-14 Rebuild, 3-14 Resolved Assembly, 3-14 Resolved part, 3-14 Smart Component, 3-14 Suppressed, 3-14 Concentric Mate, 3-16, 3-19, 3-25, 6-71 ConfigurationManager tab, 3-55, 6-11 Confirmation Corner, 1-16 Active Sketch, 1-16 Exit Sketch, 1-16 Conic Sections and Planes, 9-31 Consolidated Slot toolbar, 2-73 Convert Entities Sketch tool, 2-52, 5-48 Copy Command, 2-56, 2-58 Copy/Paste Command, 2-58 Coradial Relation, 2-64 Corner Rectangle Feedback icon, 2-23 Corner Rectangle Sketch tool, 2-23 Cosmetic Thread Feature, 2-99 Counberbore Hole, 5-48 Counter Weight Assembly, 3-90 Create a Sketch, 2-22 Crop View Drawing tool, 4-33 Ctrl-Tab, 3-10 Curve Through XYZ Points Feature, 9-18 Curves, 9-16, 9-18 Explicit Equation Driven, 9-14 Parametric Equation Driven, 9-16 Projected Composite, 9-21 Through XYZ Points, 9-18 Custom Document Templates, 2-10 Custom Properties - Drawing Template, 4-6 Custom Properties - Drawing, 4-64, 4-65 Custom Property - Drawing, 4-6, 4-64, 4-14 CUSTOM-B, 4-19 CUSTOMER Assembly, 3-5, 3-71 Customize CommandManager, 1-21 Customize FeatureManager, 1-19 Customizing Toolbar, 5-69 Cut-Extrude PropertyManager, 2-30 Cut-Revolve PropertyManager, 5-63, 6-25 D Datum Planes, 2-17, 2-18 d-cutout Feature, 5-49 Deactivate a tool, 2-24 Defeature tool, 6-4 Deformation (-Displacement-), 8-8, 8-11 Degrees of Freedom, 3-6, 3-12 Delete a Mate, 3-65 Delete Feature, 5-34 Derived (Pattern) Configuration, 7-63 Design Checklist, 5-70 Design Intent, 2-25, 5-6, 9-4 Assembly, 5-8 Drawing, 5-8 Feature, 5-7 Part, 5-8 Sketch, 5-6, 9-4 Design Library, 1-26, 1-27, D ContentCentral, 1-27, 2-8 SolidWorks Content, 1-27 Toolbox, 1-27 Design Table, 6-9, 6-10, 6-11 Design Table - Configurations, 6-10, 6-11 Detail Drawing Detail View - Drawing, 4-29, 4-32, 4-37 Dimension - Angular, 2-71, 5-29 Dimension - Dual, 5-14 Dimension - Fillet, 4-55, 4-56 Dimension - Modify, 2-58 Dimension - Radial, 2-74 Dimension Driven by Equations, 9-11 Dimension Feedback icon, 1-15 Dimension, 1-15 Edge, 1-15 Face, 1-15 Vertex, 1-15 Dimension Holes - Drawing, 4-45 Dimension PropertyManager, 2-26 Dimension Text Dialog box, 4-47 Dimension the Sketch, 5-19 Dimetric - View Orientation, 1-17 DimXpert, 9-34 Displacement (-Res disp-), 8-8, 8-11 Display Modes - Drawing, 4-35 Display Style, 1-17 Hidden Lines Removed, 1-17 Hidden Lines Visible, 1-17 Shaded With Edges, 1-17 Shaded, 1-17 Wireframe, 1-17 INDEX - 3

4 Display Temporary Axes, 2-78 Display/Delete Relations Sketch tool, 2-63 Distance mate, 3-17, 3-26, 6-74, 6-77 Dock CommandManager, 1-22 Document Properties, 2-10, 3-10, 4-9, 5-11 Dome Feature, 5-64, 6-18 Dome PropertyManager, 5-64, 6-18 Double - View Orientation, 1-17 Draft Analysis - Mold Design, 5-75 Draft Angle Command, 5-29 Draft Feature, 6-41 Draft Option, 6-22 Draft PropertyManager, 6-42, 6-43 Drafting Standard, 2-6, 2-34 DraftXpert PropertyManager, 6-42 DraftXpert, 5-75, 6-42 Drawings, 4-1 Add Revision, 4-60 ANGULAR Tolerance, 4-15 Annotations, 4-10 Arc Condition, 4-52 As Phantom lines, 4-35, 4-36 Auto Balloon, 4-69 Auxiliary View, 4-29, 4-30 Center Marks, 4-48 Centerline, 4-48 Custom Properties, 4-14, 4-64 Detail View, 4-29, 4-32 Detail, 4-37 Dimension Holes, 4-45 Display Modes, 4-35 Edge Properties, 4-27 Exploded View, 4-67 Font, 4-14 Formatting toolbar, 4-15 Gap, 4-40, 4-41 General Note, 4-56 Hide View Dimension, 4-43 Hole Callouts, 4-45 Insert Dimension into a View, 4-42 Insert Magnetic Lines, 4-70 Leader Line, 4-40, 4-41 Logo, 4-17 Move Dimension to a Different View, 4-44 Move Dimensions, 4-40, 4-41 Move Views, 4-26, 4-28 Parametric Note, 4-56 Reference Dimension, 4-53 Revision Table, 4-59 Section View, 4-29, 4-32 Sheet Format, 4-19 Sheet Scale, 4-68 Show in Exploded State Command, 4-69 System Properties, 4-12, 4-26 Tangent Edges, 4-36 Title Block, 4-14 Tolerance Note, 4-15 View Properties, 4-27 Drawing Layers, 4-11 Drawing Mode - Edit Sheet Format, 4-5 Drawing Mode - Edit Sheet, 4-5 Drawing Sheet Format, 4-5 Drawing Template, 4-5, 4-21 Drawing Template - B (ANSI) Landscape, 4-5 Drawing Template - Custom Properties, 4-6 Drawing tool - Auxiliary View, 4-30 Drawing tool - Detail View, 4-32 Drawing tool - Model Items, 4-39 Drawing tool - Model View, 4-24 Drawing tool - Section View, 4-31 DrawnBy Custom Property, 4-63 DrawnDate Custom Property, 4-63 Dual Dimension, 5-14 Dynamic Mirror Sketch tool, 2-70, 5-65 E Edge Feedback icon, 1-15 Edit Component tool, 7-24, 7-91 Edit feature tool, 2-59, 6-19 Edit Material Command, 2-82 Edit Part Color, 2-65 Edit Sheet Format Mode, 4-5 Edit Sheet Mode, 4-5 Edit Sketch Command, 2-63 Edit Sketch Plane Sketch tool, 2-62 Edit Sketch tool, 2-63 edrawing, 6-83 Animation, 6-84 Save, 6-84, 6-85 Elastic Modulus, 8-5, 8-6 Elasticity Theory, 8-4 Elements, 8-4 End Condition, 9-23 Blind, 2-29, 6-23, 9-23 Mid Plane, 2-72, 9-24 Offset from Surface, 9-24 Through All, 2-74, 5-67, 9-23 Up To Body, 9-24 Up To Surface, 6-54, 9-24 Up To Vertex, 9-23, 9-26 INDEX - 4

5 ENGDESIGN-W-SOLIDWORKS folder, 1-9 Equal Relation, 2-37, 5-28 Equation Driven Curve Sketch tool, 9-14 Equations - Dimension by equations, 9-11 Equations, 7-19, 7-82, 9-11 Exit Sketch tool, 2-59 Explicit Equation Driven Curve, 9-14 Explode PropertyManager, 3-52 Exploded View - Drawing, 4-67 Exploded View Assembly tool, 3-52 Export File, 6-83 External References, 7-25, 7-28, 7-78 Extruded Boss/Base Feature, 2-14, 2-16 Extruded Cut Feature, 2-35, 2-29 F Face Filter, 3-24 Factor of Safety, 8-6, 8-11 FEA tool, 8-3 FEA, 8-5 Feature - Cosmetic Thread, 2-99 Feature - End Condition, 9-23 Feature - Fillet, 4-55 Feature - Rename, 2-49, 2-56 Feature Statistics, 6-19 Feature tools, 2-14 Chamfer, 2-51, 2-52, 3-42 Circular Pattern, 5-64, 5-67 Curve Through XYZ Points, 9-18 Dome, 5-63, 6-18, 6-41 Edit, 2-59, 5-19 Extruded Boss/Base, 2-29, 5-19 Extruded Cut, 2-35, 2-55 Fillet Multiple radius, 5-37, 5-39 Fillet, 2-41, 5-22 Freeform, 6-18 Helix/Spiral, 6-27, 6-45 Hole Wizard, 2-50, 6-48 Linear Component Pattern, 3-64 Linear Pattern 6-56 Lofted Boss/Base, 6-13, 6-17, 6-34, 6-37 Mirror, 1-100, 6-61, 9-29 Plane, 6-14, 6-25, 9-21 Revolved Boss/Base, 3-42, 5-46 Revolved Cut, 5-62 Revolved Thin Cut feature, 6-24, 6-25 Rib, 6-56 Shell, 5-46, 6-23, 6-39 Swept Boss/Base, 6-7, 6-30 FeatureManager Design Tree, 1-6, 1-23 Fly-out, 1-25 New Folder, 3-68 Split, 1-24 FeatureManager tabs, 1-23 ConfigurationManager, 1-23 DimXpertManager, 1-23 DisplayManager, 1-23 PropertyManager, 1-23 FeatureXpert, 5-26, 9-27 FEM, 8-4 FH-M4-25ZI, 7-70 FH-M5-30ZI, 7-70 File - Menu bar menu, 1-5 File Locations - Add Folder, 4-20 File Locations - SolidWorks, 2-9 File Management, 2-6, 2-7 Fillet Feature - Multiple radius, 5-37, 5-39 Fillet feature, 2-41, 4-55, 5-21, 5-22 Fillet PropertyManager, 2-41, 5-22 FilletXpert, 2-41 FilletXpert PropertyManager, 2-41 Filter icon, 3-27 Finish Custom Property, 4-65, 4-66 Finite Element Analysis tool, 8-3 First Angle Projection, 2-19, 2-20 Fit the Model, 2-31 Fixed Component, 3-9 Fixtures, 8-10 FLASHLIGHT Assembly, 5-4, 6-64, 6-76 Insert BATTERYANDPLATE, 6-79 Insert CAPANDLENS, 6-78 Insert HOUSING, 6-76 Insert SWITCH, 6-76 Interference, 6-82 Float CommandManager, 1-22 Float Component, 3-9 Fly-out FeatureManager, 1-25 Force Normal, 8-10 Freeform feature, 6-18 Front - View Orientation, 2-14 Fully Defined - Sketch State, 2-52, Fully Defined Sketch tool, 9-5 Fully Defined Sketch, 2-52, G Gap - Drawing, 4-40, 4-41 Gear Mate, 3-18 General Note - Drawing, 4-56 Geometric Pattern box, 2-76 Geometric Relation - Coincident, 2-49, 2-59, 5-50, 6-48 INDEX - 5

6 Geometric Relation - Collinear, 4-34 Geometric Relation - Coradial, 2-64 Geometric Relation - Equal, 2-37, 5-28 Geometric Relation - Horizontal, 2-38, 3-43 Geometric Relation - Intersection, 5-52, 6-60 Geometric Relation - Perpendicular, 5-67 Geometric Relation - Pierce, 6-8, 6-29 Geometric Relation - Tangent, 6-16 Geometric Relation - Vertical, 2-53, 5-52 Geometry Relation - Pierce, 6-46, 6-52 Global Variables, 7-17 Graphics Window, 1-8 Grid/Snaps, 1-8 GUIDE Part, 2-67 First Extruded Cut Feature, 2-72 Hole Wizard Feature, 2-77 Interference Problem, 3-59 Linear Pattern Feature, 2-80 Mass Properties, 2-82 Materials Dialog box, 2-83 Mirror Feature, 2-76 Modify, 4-22 Section View, 3-56 Vertical Relation, 2-77 GUIDE Drawing, 4-23 Additional Feature, 4-54 Auxiliary View, 4-30, 4-43 Balloons, 4-69 Bill of Materials, 4-71 Center Marks, 4-48 Centerlines, 4-48, 4-50 Crop View, 4-33 Custom Properties, 4-14 Detail View, 4-32, 4-37 Display Modes, 4-35 Document Properties, 4-61 Drawing Template, 4-7 Exploded View, 4-67 General Note, 4-56 Insert Dimensions, 4-39 Insert Drawing Views, 4-24 Layers,4-11 Logo, 4-17 Modify Dimensions, 4-50 Move Dimension, 4-44 Move Views, 4-26 Parametric Note, 4-56 Part Number, 4-61 Partial Auxiliary View, 4-33 Revision Table, 4-59 Section View, 4-31 Sheet Format, 4-12 Sheet Properties, 4-9 GUIDE-ROD Assembly, 3-5, 3-5, 3-11 Coincident mate, 3-25 Collision Detection, 3-30 Design Library, 3-32 Exploded View, 3-52 Pattern Driven Component, 3-63 First Concentric mate, 3-19 Insert Component, 3-11, 3-23 Insert Flange Bolt mates, 3-35 Linear Component Pattern, 3-11, 3-23, 3-64 Mate Errors, 3-27 Mate the PLATE Component, 3-23 Mate the ROD Component, 3-18 Modify Component Dimensions, 3-31 PLATE - Coincident Mate, 3-25 PLATE - Parallel Mate, 3-26 Redefining mates, 3-64 ROD - Parallel Mate, 3-22 Second Concentric Mate, 3-25 Tolerance and Fit, 3-48 H Heads-up View toolbar, D Drawing View, 1-18 Apply Scene, 1-18 Display Style, 1-17 Edit Appearance, 1-18 Hide/Show Items, 1-18 Previous View, 1-17 Rotate View, 1-17 Section View, 1-17 View Orientation, 1-17 View Setting, 1-18 Zoom to Area, 1-16 Zoom to Fit, 1-16 Helix/Spiral feature, 6-27, 6-45 Helix/Spiral PropertyManager, 6-27, 6-45 Help - Menu bar menu, 1-5, 1-13 Help - SOLIDWORKS, 1-13 Hidden Lines Removed - Display Style, 1-17 Hidden Lines Visible - Display Style, 1-17 Hide Annotations Command, 4-56 Hide Command, 2-48 Hide Component, 3-22 Hide Feature Dimensions Command, 6-19 Hide Plane, 5-29 Hide Reference Geometry, 3-66 INDEX - 6

7 Hide View Dimension, 4-43 Hinge Mate, 3-18 Hole Callout - Drawing, 4-45 Hole Specification PropertyManager, 5-49 Hole Wizard - 2D Sketch, 2-50, 2-51 Hole Wizard - 3D Sketch, 2-50, 2-51 Hole Wizard feature, 2-50, 2-51, 5-48 HOOK Part, 6-90 Horizontal Dimension, 6-36 Horizontal Relation, 2-64, 3-44 Horizontal Sketch Relation, 2-38 HOUSING Part, 6-31 Draft feature, 6-41 Extruded Base feature, 6-33 Extruded Boss feature, 6-38 Extruded Cut feature, 6-53 First Rib and Linear Pattern feature, 6-55 Handle with Swept feature, 6-48, 6-52 Lofted Boss Feature, 6-34, 6-37 Mirror Feature, 6-61 Second Extruded Boss Feature, 6-40 Second Rib Feature, 6-58 Shell Feature, 6-39 Thread with Swept Feature, 6-43, 6-47 I - J IGES Components, 7-70 Image Quality, 7-33 In-Context features, 7-10, 7-24, 7-28, 7-29 Injection Molded Process, 5-32 InPlace Mates, 7-10, 7-24 Insert a Mate, 3-19 Insert Component Assembly tool, 3-9, 3-11, 3-23, 6-67, 7-89 Insert Design Table, 6-10 Insert Dimension into a Drawing View, 4-42 Insert Dimension, 2-26, 2-38 Insert Drawing Views, 4-24, 4-26 Insert magnet lines, 4-70 Instant3D feature, 2-32 Intelligent Modeling Techniques, 9-1 Along A Vector, 9-26 Assembly Visualization, 9-32 Curve Through XYZ Points feature, 9-18 DimXpert, 9-34 End Conditions, 9-23 Equations, 9-11 Explicit Equation Driven Curve, 9-14 FeatureXpert, 9-27 Fully Defined Sketch tool, 9-5 MateXpert, 9-34 Parametric Equation Driven Curve, 9-16 Planes, 9-30 SketchXpert, 9-18 Sustainability, 9-33 Symmetry, 9-28 Interference Detection tool, 6-82 Interference fit, 3-48 Interference Issues, 6-82 Interference Problem, 3-59 Internal Force, 8-4 Intersection Relation, 5-52, 6-49, 6-60 IPS, 2-6, 2-10, 2-11 ISO - Drafting Standard, 2-10 K - L K factor, 7-91 Layer - Modify, 4-50 Layer Color, 4-11 Layers toolbar, 4-11 Layout sketch, 7-13, 7-29 Leader line - Drawing, 4-40, 4-41 Left - View Orientation, 1-17 LENS Part, 5-42 Extruded Boss/Base Feature, 5-47 Hole Wizard Feature, 5-48 Revolved Base Feature, 5-43 Revolved Boss Thin Feature, 5-51 Second Extruded Boss/Base Feature, 5-53 Shell Feature, 5-46 Third Extruded Boss/Base Feature, 5-56 Transparent Optical Property, 5-55 LENSANDBULB Sub-assembly, 6-65 Insert LENS Part, 6-67 LENSCAP Part, 6-20 Extruded Base Feature, 6-22 Extruded Cut Feature, 6-23 Helix/Spiral Feature, 6-27 Plane Feature, 6-26 Revolved Feature, 6-24 Revolved Thin Cut Feature, 6-24, 6-25 Shell Feature, 6-23 Swept Boss/Base Feature, 6-30 Limit Mate Assembly, 3-93 Line Properties PropertyManager, 2-25 Line Segments, 2-69 Line Sketch tool, 2-70, 2-71, 5-66 Linear Component Pattern Feature, 3-64 Linear Motion, 3-6 Linear Pattern - Geometry pattern, 7-48 Linear Pattern - Instance, 7-48 INDEX - 7

8 Linear Pattern Feature, 2-80, 6-56 Linear Pattern Sketch tool, 7-58 Linear/Linear Coupler Mate, 3-17 Linearly Elastic Material, 8-6 Link to Property Command, 4-64 Loads, 8-4, 8-10 Locked Reference, 3-15 Lofted Boss/Base Feature, 6-13, 6-17, 6-34 Logo - Drawing, 4-17 M Magnet Lines tool, 4-70 Manufacturing Considerations, 2-84 Manufacturing Design Issues, 5-83 Mass Properties tool, 2-82 Mate Alignment Option, 3-17 Mate Assembly tool, 3-19, 3-25, 6-73, 6-79 Mate Error Message, 3-27 Mate Pop-up toolbar, 3-18, 3-20 Mate PropertyManager, 3-16 Mate Types, 3-16 Material Custom Property, 4-65 Material Dialog Box, 2-83 Material Editor, 2-82, 2-83 MateXpert, 9-34 Measure tool, 5-30 Mechanical Mates, 3-18 Cam Mate, 3-18 Gear Mate, 3-18 Hinge Mate, 3-18 Rack Pinion Mate, 3-18 Screw Mate, 3-18, 3-94 Slot Mate, 3-18, 3-37 Universal Joint Mate, 3-18 Menu bar menu, 1-5 Edit, 1-5 File, 1-5 Help, 1-5 Insert, 1-5 Pin, 1-5 Tools, 1-5 View, 1-5 Window, 1-5 Menu bar toolbar, 1-4 New, 1-4 Open, 1-4 Options, 1-4 Print, 1-4 Rebuild, 1-4 Save, 1-4 Select, 1-4 Undo, 1-4 MGPM Assembly, 3-70, 3-71, 8-7 MGPM _ROD Component, 8-9 Mid Plane End Condition, 2-72 Mirror Components Feature, Mirror Components PropertyManager, Mirror Entities Sketch tool, 6-36, 6-51 Mirror Feature, 2-76, 6-61, 9-29 Mirror PropertyManager, 2-76 Mirror Sketch tool, 2-70 MirrorBRACKET Part, Fold Feature, Insert Bends Feature, Jog Feature, Unfold Feature, Miter Flange PropertyManager, 7-96 MMGS, 2-6, 2-10, 5-12 Model Items Drawing tool, 4-39, 4-43 Model Items PropertyManager, 4-39, 4-43 Model View Drawing tool, 4-24 Model View PropertyManager, 4-7, 4-24 Modify Dimension, 2-31 Modify Sketch Dialog box, 7-50 Modify Sketch tool, 7-50, 7-52, 7-53 Mold - Parting Line Feature, 5-76 Mold - Parting Surface Feature, 5-77 Mold - Scale Feature, 5-76 Mold - Shut-off Surfaces, 5-77 Mold - Tooling Split Feature, 5-78 Mold Base, 5-72 Mold Design - Draft Analysis, 5-73 Mold Design - Parting Lines, 5-73 Mold Design - Parting Surfaces, 5-73 Mold Design - Ruled Surface, 5-73 Mold Design - Tooling Split, 5-73 Mold toolbar, 5-74 Mold Tooling Design, 5-72 MOLD-TOOLING Part, 5-75 Parting Lines Feature, 5-76 Parting Surface Feature, 5-77 Scale Tool Feature, 5-76 Shut-off Surface Feature, 5-77 Tooling Split Feature, 5-78 MOTHERBOARD - Hole Wizard feature, 7-76 MOTHERBOARD - Insert Component, 7-22 MOTION LINKAGE Assembly, Motion Study, 1-30 Animation, 1-30 Basic Motion, 1-30 INDEX - 8

9 MotionManager, 1-30 Mouse Gesture Wheel, 1-24 Mouse Movements, 1-32 Double-click, 1-32 Right-click, 1-32 Scroll Wheel, 1-32 Single-click, 1-32 Mouse Pointer, 2-26, 2-34 Move a Component, 3-21 Move Component PropertyManager, 3-30 Move Dimension in View, 4-40, 4-41 Move Dimension to Different View, 4-44 Move views - Drawing, 4-26, 4-28 Multi-body Parts, 5-40 MY-TEMPLATES folder, 2-7, 2-9, 5-12 MY-TEMPLATES tab, 2-9, 4-19, 4-23 N Named View, 2-57 New Assembly Document, 3-8 New Document Command, 1-7 New Drawing, 4-7 New Folder - FeatureManager, 3-68 New Folder, 2-7 New Motion Study, 1-30 New Part Document, 1-7, 2-15 Newton, 8-6 Node, 8-4, 8-5 Non-Uniform Rational B-Spline, 5-57, 5-60 Normal To View tool, Note Annotation tool, 4-57 Novice Mode - New Document, 1-7 NURB, 5-57, 5-60 O Offset Entities Sketch tool, 5-23, 5-36 Offset from Surface - End Condition, 9-24 Open Document Command, 1-9 Options Command, 2-8 Orientation Dialog box, 1-17 Origin, 1-8, 2-16, 6-33, 6-36 O-RING Part, 6-7 Design Table, 6-9, 6-10, 6-11 Large, 6-10, 6-11 Medium, 6-10, 6-11 Small, 6-10, 6-11 Swept Base feature, 6-7 Orthographic Projection, 2-18 Out of Context, 3-15 Over Defined - Sketch State, 2-28 P - Q Pack and Go, 3-76 Parallel Mate, 3-16, 3-22, 3-26, 3-36 Parametric Driven Curve Sketch tool, 9-16 Parametric Note - Drawing, 4-56, 4-57 Part Template, 2-10, 2-11 Part Template - PART-IN-ANSI, 5-11 Part Template - PART-MM-ISO, 5-11 Partial Auxiliary View, 4-33 PART-IN-ANSI - Part Template, 5-11 PART-MM-ANSI, 2-11 PART-MM-ISO - Part Template, 5-11 Path Mate, 3-17 PEM Fasteners, 7-70, 7-71 Perpendicular Relation, 5-67 Phantom Lines - Drawing, 4-35, 4-36 Pierce Relation, 6-8, 6-29, 6-46, 6-52 Pin - Menu bar menu, 1-5 PLA, Plane Feature, 6-14, 6-25, 9-21 Plane Feature tool, 6-14, 6-25, 9-21 Plane PropertyManager, 6-14, 6-25 PLATE Part Overview, 2-22 Add Dimension, 2-26 Equal Relation, 2-37 Extruded Base Feature, 2-29 Extruded Cut Feature, 2-36, 2-39 Fillet Feature, 2-41 Hole Wizard Feature, 2-43 Horizontal Relation, 2-38 Modify Dimension, 2-27, 2-31 Rename, 2-31, 2-40 Point at the Center of Mass, 3-79 Point Sketch tool, 6-17, 7-60 Polygon Sketch tool, 3-43 Power Trim Option, 2-54 Power Trim tool, 5-67 POWERSUPPLY Part, 7-28 Primary Datum Plane, 2-18 Profile Lines, 5-59 Projected Composite Curve, 9-21 PROJECTS Folder, 2-7, 3-10 Propagate icon, 7-96 Publish edrawing, 6-84 Quick Mate, 3-18, 3-35 R Rack Pinion Mate, 3-18 Radial Dimension, 2-74 Rapid Prototype, 6-83 INDEX - 9

10 Rebuild Document Command, 2-28 Rebuild Errors, 2-61 Redefining Mates, 3-64 Reference Dimension - Drawing, 4-53 Reference is Broken, 3-15 Reference Plane, 6-14 Reference Planes, 2-18 Reference Planes - Default, 2-18, 2-30 Reference Planes - Front, 2-18, 2-19 Reference Planes - Right, 2-18, 2-19 Reference Planes - Top, 2-18, 2-19 Reference Point, 7-99 Remove an Instance, 7-42 Remove Trailing zeroes, 4-46 Rename a Drawing View, 4-30 Rename Feature, 2-25, 2-32, 5-22 Rename Sketch, 2-25, 2-32 Replace Component, 7-79 Resolved Component, 3-13 Revision Table - Drawing, 4-59 Revision Table PropertyManager, 4-59 Revolve PropertyManager, 3-42 Revolved Base Feature, 3-42 Revolved Boss Thin Feature, 5-51 Revolved Boss/Base Feature, 5-43, 5-46 Revolved Cut Feature, 5-62, 6-25 Revolved Cut Thin Feature, 5-61 Revolved Thin Cut Feature, 6-24, 6-25 Rib Feature, 6-56 Right - View Orientation, 1-13 Right-Click Select Command, 2-24 Right-Click, 2-24 ROD Part Overview, 2-46 Chamfer Feature, 2-51 Coincident Relation, 2-49 Convert Entities, 2-52 Copy/Paste Command, 2-58 Coradial Relation, 2-64 Design Changes/Rollback bar, 2-59 Edit Appearance, 2-65 Extruded Base Feature, 2-49 Extruded Cut Feature, 2-55 Hole Wizard Feature, 2-50 Recover for Rebuild Errors, 2-61 Trim Entities, 2-54 View Orientation, 2-57 Rollback Bar, 1-10, 2-59 Rotate a component, 3-21, 3-24 Rotate Component Assembly tool, 3-24, 6-79 Rotate Component tool, 3-33, 7-72 Rotate Part, 5-47 Rotate View, 1-12 Rotational Motion, 3-6 S Save - edrawing, 6-84, 6-85 Save a Drawing Document, 4-16 Save As Command, 2-11, 3-10, 5-34 Save As Copy Options, 3-60 Save as, 3-60 Save as copy and continue, 3-60 Save as copy and open, 3-60 Save Command, 2-39 Save Document Command, 2-11 Save Drawing Document, 4-25 Save Part Template, 2-11 Save Sheet Format, 4-19 Screw mate Assembly, 3-94 Screw Mate, 3-18 Secondary Datum Plane, 2-18 Section View, 6-80 Assembly, 3-57 Drawing, 4-29, 4-31 Part, 5-50 Drawing tool, 4-31 Seed Feature, 5-64 Select Other tool, 3-75, 3-94 Select Other, 3-75, 3-94 Selection Enhancements, 1-22 Box Selection, 1-22 Lasso Selection, 1-22 Selection Filters, 1-22 Previous Selection, 1-22 Select, 1-22 Magnified Selection, 1-22 Selection Filter, 1-22, 3-24, 5-31 Selection Filter toolbar, 3-24, 6-69 Sensors tool, 1-23 Set Document Properties, 5-11, 5-12 Set the Layer Color, 4-11 Set to Resolved, 7-68 Shaded - Display Style, 1-17 Shaded With Edges - Display Style, 1-17 Sheet Format, 4-12, 4-19 Sheet Format/Size Dialog box, 4-7 Sheet Metal, 7-34 Base Flange/Tab Feature, 7-94 Bends Feature, 7-34 Break Corner/Corner Trim Feature, 7-95 CABINET Part, 7-37 INDEX - 10

11 Design Library, 7-49 Design Table, 7-86 Edge Flange Feature, 7-42, 7-44, 7-93 Flat State Feature, 7-42 Fold Feature, Fully Formed State Feature, 7-42 Hem Feature, 7-43 Insert Bends Feature, 7-41, Jog Feature, K factor, 7-36, 7-41 Louver Forming tool Feature, 7-53 Manufacturing Consideration, 7-55 Miter Flange Feature, 7-95 Relief Feature, 7-37 RIP Feature, 7-40 Unfold Feature, Sheet Properties Dialog box, 4-9 Sheet Properties, 4-9, 4-26 Sheet Scale - Drawing, 4-68 Sheet Scale, 4-9 Shell Feature, 5-46, 6-23, 6-39 Short Cut Key, 5-69 Show Annotations Command, 4-56 Show Feature Dimension, 7-17 Show Feature Dimensions Command, 6-19 Show in Exploded State - Drawing, 4-69 Silhouette Edge, 6-24, 6-60 Single - View Orientation, 2-13 Sketch - Design Intent, 9-4 Sketch - Edit Sketch, 2-59 Sketch - Fully Defined, 2-28 Sketch - Rename, 2-23 Sketch Driven Pattern feature, 7-61 Sketch Fillet Sketch tool, 6-35 Sketch Plane, 2-3 Sketch Relations - View, 2-24 Sketch State - Fully Defined, 5-20 Sketch State - Over Defined, 5-20 Sketch State - Under Defined, 5-20 Sketch States, 9-5 Sketch Status - Black, 5-20 Sketch Status - Blue, 5-20 Sketch Status - Light Blue, 5-20 Sketch Status - Red, 5-20 Sketch tool point Arc, 5-44 Center Rectangle, 5-18, 6-15 Centerline, 2-68, 3-40, 4-34 Centerpoint Arc, 5-51 Circle, 2-77 Conic, Convert Entities, 2-53, 5-48 Corner Rectangle, 2-23 Dimension Driven by Equation, 9-11 Display/Delete Relations, 2-63 Dynamic Mirror, 2-69, 5-66 Edit Sketch Plane, 2-62 Edit Sketch, 2-63 Equation Driven Curve, 9-14 Exit Sketch, 2-69 Fully Defined, 8-5 Line, 2-70, 5-66 Linear Pattern, 7-58 Mirror Entities, 6-36, 6-51 Mirror, 2-70 Modify, 7-50, 7-52 Offset Entities, 5-23, 5-26, 5-36, 5-39 Parametric Equation Sketch tool, 9-16 Point, 6-17, 7-60 Polygon, 3-43 Sketch Fillet, 6-35 SketchXpert, 9-8 Smart Dimension, 2-55, 2-60 Spline, 4-33, 5-61 Straight Slot, 2-73 Tangent Arc, 6-50, 6-60 Trim Entities, 2-54, 5-66 SketchXpert, 9-8 Smart Dimension Sketch tool, 2-55, 2-60 SmartMates, 3-45 Socket Head Cap Screw Part, MMCAPSCREW, MMCAPSCREW - Chamfer, MMCAPSCREW - Extruded Cut MMCAPSCREW - Revolved Boss, MMCAPSCREW - Save As Copy, 3-60 Solid Features, 6-20 SOLIDWORKS - File Locations, 2-33 SOLIDWORKS CommandManager, 1-19 SOLIDWORKS Document - Advanced Mode, 1-7 SOLIDWORKS - Novice Mode, 1-7 SOLIDWORKS edrawing, 6-83 SOLIDWOKRS Help, 1-13 SOLIDWORKS Simulation, 8-5 SOLIDWORKS Simulation Advisor, 8-3 SOLIDWORKS Simulation Help, 8-5 SOLIDWORKS Simulation Tutorials, 8-5 Deformation (-Displacement-), 8-8 Displacement (-Res disp-), 8-8 Factor of Safety, 8-8 INDEX - 11

12 Fixtures tab, 8-7 Loads tab, 8-8 Material tab, 8-8 Results tab, 8-8 Run tab, 8-8 Stress (-vonmises-), 8-8 Welcome tab, 8-7 SOLIDWORKS Sustainability, 8-13 SOLIDWORKS Tutorials, 1-14 Spline Sketch tool, 4-33, 5-61 Split FeatureManager, 3-54 Standard Mates, 3-16 Angle Mate, 3-17 Coincident Mate, 3-16, 3-25, 3-37, 6-68 Concentric Mate, 3-16, 3-19, 3-25, 6-71 Distance Mate, 3-17, 3-26, 6-74, 6-77 Lock Mate, 3-17 Mate Alignment Option, 3-17 Parallel Mate, 3-16, 3-22, 3-26, 3-36 Tangent Mate, 3-16 Start a SOLIDWORKS Session, 1-4 Stereo Lithography File Format, 6-83, 10-4 STL File Format, 6-83, 10-4 Strain, 8-5 Strength of Materials, 8-4 Stress (-vonmises-), 8-11, 8-8 Stress vs. Strain Plot, 8-6 Stress, 8-4, 8-5 Supply Content, 3-70 Suppress Components, 7-32 Suppress Folder, 3-68 Suppressed Components, 3-68 Swept Boss/Base Feature, 6-7, 6-30 Swept Path, 6-8 Swept Profile, 6-8, 6-8 SWEPT-CUT CASE Part, 6-92 SWITCH Part, 6-13 Dome Feature, 6-18 Lofted Base Feature, 6-13, 6-17 Symmetric Mate, 3-17 Symmetry - Bodies to Mirror, 9-28 System Feedback icons, 1-15 Dimension, 1-15 Edge, 1-15 Face, 1-15 Vertex, 1-15 System Options, 2-8 System Options - File Location, 2-9 T Tangent Arc Sketch tool, 6-50, 6-60 Tangent Edges, 5-13 Tangent Edges - Drawing, 4-36 Tangent Mate, 3-16 Tangent Relation, 6-16 Task Pane, 1-26 Appearances, Scenes Decals 1-29 Custom Properties, 1-29 Design Library, 1-27 Document Recovery, 1-29 File Explorer, 1-27 Search, 1-28 SOLIDWORKS Forum, 1-29 SOLIDWORKS Resources, 1-26 View Palette, 1-28 Templates - Custom, 2-10, 2-11 Temporary Axes, 2-78, 4-34 Tertiary Datum Plane, 2-18 Tetrahedral Element, 8-4 Third Angle Projection, 2-18, 2-19 Three Rotational, 3-6 Three Translational, 3-6 Through All End Condition, 5-67 Title Block - Drawing, 4-14 Tolerance and Fit, 3-48 Tolerance Note, 4-15 Top-down Assembly Approach, 3-5, 3-6, 7-6 Trailing Zeroes, 4-46 Transition Fit, 3-48 Transparency Option, 5-56 Trim Entities Sketch tool, 5-66 Trimetric - View Orientation, 1-13 Tutorials - SOLIDWORKS, 1-14 U - V U-BLOCK Assembly, Undo Command, 3-21, 5-20 Undo Document Command, 3-21, 5-20 Unit System, 2-11 Units - Document Properties, 2-11 Units, 2-11, 5-12 Universal Joint Mate, 3-18 Up To Body - End Condition, 9-24 Up To Surface - End Condition, 6-54 Up To Vertex - End Condition, 9-23, 9-26 User Library, 3-70 User Specified Name Command, 4-73 INDEX - 12

13 Vertical Dimension, 6-36 Vertical Relation, 5-52 View Mates tool, 3-27, 3-29 View Orientation, 1-17 Back, 1-17 Bottom, 1-17 Dimetric, 1-17 Double view, 1-17 Four View, 1-17 Front, 1-17 Isometric, 1-17 Left, 1-17 Right, 1-17 Single View, 1-17 Top, 1-17 Trimetric, 1-17 Two View, 1-17 View Palette, 1-28, 7-65 W - X - Y - Z WEIGHT Part, 6-92 What s Wrong Dialog box, 5-26 Width mate, 3-17 Window - Menu bar menu, 1-5 Window-Select, 6-51, 7-58 Wireframe - Display Style, 1-17 WIZARD-MOTION-LINKAGE, Young s Modulus, 8-5 Zoom to Area tool, 1-16 Zoom to Fit tool, 1-16 INDEX - 13