COMPUTER AIDED DESIGNING OF THE CABINET FURNITURE. Teofil MIHAILESCU, Wilhelm LAURENZI, Viorel POPA. Universitatea "Transilvania" din Brasov
|
|
- Beryl Beasley
- 5 years ago
- Views:
Transcription
1 UNIVERSITATEA TRANSILVANIA DIN BRA'OV Catedra Design de Produs +i Robotic- Simpozionul na0ional cu participare interna0ional1 PRoiectarea ASIstat1 de Calculator P R A S I C ' 02 Vol. III Design de Produs 7-8 Noiembrie Bra7ov, România ISBN COMPUTER AIDED DESIGNING OF THE CABINET FURNITURE. Teofil MIHAILESCU, Wilhelm LAURENZI, Viorel POPA Universitatea "Transilvania" din Brasov Abstract: The aim of this paper is to develop AutoLISP applications using the AUTOCAD program for designing the cabinet furniture and an appropriate user graphic interface based on dialog boxes and pop-up menus. Input data consist in type of joints, type of materials, and thickness of the each furniture part by using images, edit boxes, and popup lists. The program generates automatically a 3D solid model of all parts. As a function of the assembly system, the program generate the dowels and the correspondent holes in the parts in case of the ten on dowel joints or the specific screws when dismountable joints are used. This application allows modelling the horizontal; vertical panels, and shelves, with the correspondent supporting elements and holes. Other facilities for 2D drawing are available. All applications use a very small amount of disk memory. Keywords: CAD, furniture, AutoCAD, AutoLISP language, user graphic interface. 1. Introduction The application is based on AutoCAD, and is dedicated to the cabinet furniture, made of woodbased materials like chipboards, fibreboards, plywood, and block board. An appropriate user graphic interface based on dialog boxes and pop-up menus help the user to create the parts of the furniture easily and precisely. Input data consist in type of joints, type of materials, and thickness of the each furniture part by using images, edit boxes, and popup lists. This application provides parametric capabilities easily to program using AutoLISP language and AutoCAD commands, in order to generate the constituents of the cabinet furniture. Parametrics automate the design and drafting of families of furniture parts that are similar but different in dimension and details. Formulas were used to describe the relationships among the dimensions and variables of the elements. Once loaded, the AutoLISP functions can be chosen as options from pull-down menus and dialog boxes. The application offers the following capabilities: Creates a 3D solid model of cabinet furniture of different constructive system: dismountable or non dismountable; Wood-based materials and their thickness for each part can be chosen from popup list in dialog boxes; Possibility to organise the interior partition by adding vertical panels, horizontal panels or shelves; Different type of assembling elements are offered, and the corresponding holes in panels are created; Erasing the wrong or unwanted holes is possible;
2 A total control of the parts like dimensions, type of materials, gives the possibility to obtain the list of all components that can be saved as a text file. This file can be opened in EXCEL as a database. Facilities to prepare the 2D drawing. This application provides five modules: module to generate the body of cabinet furniture module to organise the interior partition module to add the assembling elements module to add other parts of the body module to edit the 2D drawing These modules can be chosen from the popup menu named "Cabinet furniture" as is shown in Figure 1. Fig. 3. In Figure 4 is shown the dialog box in which the type "imb1" was chosen. As can be seen in the dialog box, the edit box with the height of the plinth was activated in corresponding with the type of joint. Fig Generating the body of furniture In order to generate the body of the furniture, from the menu "Cabinet furniture", choose Body, that open the "Furniture design" dialog box as is shown in Figure 2. Fig. 4 As a result, the body presented in Figure 5 is created. Figure 2. In this dialog box, can user can select the type of joints, type of the wood-based material, thickness of panels according with the type of material, and external dimensions of the body. According to the data chosen in the Figure 2, the body is created as is shown in Figure 3. Fig Organising the interior partition In order to add vertical panels, horizontal panels or shelves, the option "Partition" must be selected (Figure 6). Fig. 6
3 To draw a shelf select Shelf option, and enter the interior height (200) and the thickness of the shelf, as is asked in the command line: Enter the interior height (max 350 mm): 200 Thickness of the shelf: 18 As a result, a shelf with supports and corresponding holes in the side panels are obtained (Figure 7 a and b). a) b) Fig 7. a - Isometric view; b - Detail in wire frame image In order to create a vertical panel, chose option "Partition>" and "Vertical panel" from the menu "Cabinet furniture", and enter values for the following prompters: Enter the thickness of the vertical panel <18>:16 Enter the distance from the left panel(<546):300 As a result, a vertical panel is created as is shown in Figure 8. of the thickness of the panels. Also the distance between dowels are automatically calculated as a function of the width of the panels, distance between them being multiple of 32 mm. In order to generate elements of assembling chose "Assembling" from the menu "Cabinet furniture", and select one of the radio buttons in the dialog box "Joints" as is shown in Figure 9. Fig 9 Fig. 8 An horizontal panel is generated similarly. In Figure 10 is shown the furniture body displayed in an expanded mode after the dowel joint was selected. 2. Adding the assembling elements This application provides different types of elements for assembling the top plate, side plates, lower plate, and plinth: dowels and dismountable elements like ericson and screw. When the elements are generated, the holes in the plates are created automatically. Dimensions of the dowels and holes are chosen by the program as a function
4 The program draws the frame of the draw and table with data included. The option "Edit table" enables the user to add a header to the table, to add rows, to insert and delete rows already written, to modify the content of a row, or reorder the number of rows in table. To continue the table on the left side it is also possible. Fig Editing 2D draw The application offers the possibilities to help the designer to edit 2D draws by selecting the "Draw2D" menu (Figure 11). Fig. 13 The option "Section direction" (Figure 14) helps the user to draw easily the symbol of a vertical or horizontal section direction Fig. 11 The option "Table" opens the dialog box "Format" shown in Figure 12 that ask information to fill in the table. Fig. 14 Positioning the parts of furniture can be draw by selecting the "Position line" option, as is shown in Figure 15. Fig. 15 Fig. 12 Entire content of the rows of table with component data can be saved in a file with option "Save table in file". The file obtained can be opened and explored in EXCEL.
5 4. Conclusions The application developed in this paper can help the user do obtain 3D and 2D draws of furniture in an easy manner using menu file and dialog boxes. All files need no more than 310 KB that can be loaded very easy. More functions can be added to the application for other type of joints and material types. Bibliography 1. Autodesk, Inc. AutoCAD User's Guide. Singapore, Mihailescu, T., Mustata, C. Aplicatii AutoLISP in Proiectarea Mobilei Corp. Conferinta Nationala de Comunicari Stiintifice Industria Lemnului in Prag de Mileniu III. Brasov, 2000, p
Training CAD/ Part Designer: Designing with Angled Parts
Training CAD/ Part Designer: Designing with Angled Parts We have attempted to keep the content of this document complete, accurate and under permanent review. However, due to the continuous development,
More informationAssignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
More informationAutodesk Inventor. In Engineering Design & Drafting. By Edward Locke
Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)
More informationAssembly Instructions
Selling Station Assembly Instructions View from above without top A B C D Rounded finished corners on A & D Square unfinished 3-sides on B & C Selling Station Components (2) 2' x 6' Side s Have a channel
More informationIMMERSIVE VIRTUAL REALITY AS AN INTERACTIVE TOOL FOR CABLE HARNESSES DESIGN. James RITCHIE*, John SIMMONS*, Patrik HOLT**, George RUSSELL*
UNIVERSITATEA TRANSILVANIA DIN BRA*OV Catedra de Produs +i Robotic- Simpozionul na4ional cu participare interna4ional5 PRoiectarea ASIstat5 de Calculator P R A S I C ' 02 Vol. III de Produs 7-8 Noiembrie
More informationAssignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
More informationimos Getting Started
imos 12.0 - Getting Started June 2015 imos Aktiengesellschaft Planckstraße 24 D-32052 Herford Tel. +49(0)5221.976-0 Fax +49(0)5221.976-123 info@imos3d.com www.imos3d.com This document is provided just
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Chapter 10 Exercise 1 1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Construct
More informationSymbols and Standards (Architectural CAD)
Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationAutoDesk Inventor: Creating Working Drawings
AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working
More informationThis document describes the new features of MTpro version as compared to MTpro
New features in MTpro 3.6 This document describes the new features of MTpro version 3.6.0.0 as compared to MTpro 3.5.0.0. Table of contents 1 General... 2 2 New contents... 3 2.1 New CAD models... 3 2.2
More informationIn this activity students will create an orthographic drawing. Students will also change line layers.
Description In this activity students will create an orthographic drawing. Students will also change line layers. Lesson Objectives The student will be able to: Define orthographic drawing Draw three to
More informationCode Description Qty. Material Dimensions A Long Inner 4 2 x 4 pine 34-1/2 long
B utler s Chest Because it s designed to suit a variety of purposes, this butler s chest is a piece of furniture that absolutely anyone can appreciate. Used by itself, it can serve as an end table or can
More informationAutodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
More informationAUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
More informationCADprofi Table of contents list of new features in CADprofi 11.07:
11.07 Table of contents list of new features in CADprofi 11.07: - CADprofi Architectural - CADprofi Electrical - CADprofi Mechanical - CADprofi HVAC & Piping - General commands (affects all modules) -
More informationNX 7.5. Table of Contents. Lesson 3 More Features
NX 7.5 Lesson 3 More Features Pre-reqs/Technical Skills Basic computer use Completion of NX 7.5 Lessons 1&2 Expectations Read lesson material Implement steps in software while reading through lesson material
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationArchitect. Architect.
The The line line sketch sketch with with modified modified height height for for plinth plinth floor floor is is displayed. displayed. Open Open Architectural Architectural plan plan file, file, which
More informationBSketchList 3D. BSoftware for the Design and Planning of Cabinetry and Furniture RTD AA. SketchList Inc.
1 BSketchList 3D 1 BSoftware for the Design and Planning of Cabinetry and Furniture 2 RTD10000651AA 2 Overview of SketchList 3D SketchList 3D is a software program that aids woodworkers in the design and
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationApplied Precast Concrete Detailing
Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2014
Precast Concrete Industry Extensions for Autodesk Revit Structure 2014 Reinhard Lackner Managing Director - IDAT Join us on Twitter: #AU2013 Class summary This class shows how extensions to Autodesk Revit
More informationAutoCAD 2D. Table of Contents. Lesson 1 Getting Started
AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationIT, Sligo. Equations Tutorial
Equations Tutorial Parametric Modelling: SolidWorks is a parametric modelling system where parameters, such as dimensions and relations, are used to create and control the geometry of the modelled part.
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2002 SUPERVISOR TO ATTACH PROCESSING LABEL HERE Figures Words STUDENT NUMBER Letter VCE VET FURNISHING (CABINET MAKING) Written examination Friday 1 November 2002 Reading
More informationEvaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
More informationAssignment 10 Revit CAD Fundamentals I Due March 29 Architecture 411
Due March 29 Architecture 411 Objectives To learn the basic concepts involved with Building Information Modeling. To become familiar with basic operation of the Revit user interface. To learn techniques
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationTechnical Product Description
Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS ITEM No. :Quilty/ 3 A helpful Assembly Video can be found on www.arrowcabinets.com in the Video Section under Quilty Incorrect Correct The turning direction of attaching The arrow
More informationHandbook SelectionProfessional
Handbook SelectionProfessional Legal notice We reserve all copyrights for this handbook. This handbook or any parts thereof cannot be printed in any form without our written permission. No liabilities
More informationAutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods
AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,
More informationUnit 15: Using Symbols and Attributes
Unit 15: Using Symbols and Attributes Overview Many electronics drawings use the same geometry over and over. The resistor symbol, commonly found on printed circuit board drawings, is one example. AutoCAD
More informationCADprofi Summary of main changes made to the program since the CADprofi version.
11.01 Summary of main changes made to the program since the CADprofi 10.01 version. CADprofi Architectural extension of the woodwork library Additional types of windows and doors have been added to the
More informationUnit 15: Using Symbols and Attributes
Unit 15: Using Symbols and Attributes Overview Many mechanical drawings use the same geometry over and over. The SI symbol, commonly found on Metric drawings, is one example. AutoCAD allows you create
More informationChlorophyll Fluorescence Imaging System
Quick Start Guide Chlorophyll Fluorescence Imaging System Quick Start Guide for Technologica FluorImager software for use with Technlogica CFImager hardware Copyright 2006 2015 TECHNOLOGICA LIMITED. All
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationInstalling Electronic Media Storage Components into Lateral File Cabinets
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Installing Electronic Media Storage Components into Lateral File Cabinets 830-CH-9 830-CH-12 830-CH15 836-CH-9 836-CH-12 836-CH-15 842-CH-9
More informationAutodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS
Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More informationPictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor
DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor Pictorial Drawings Geisecke s textbook for reference: 14 th Ed. Ch. 15: p. 601 Ch. 16: p. 620 15 th Ed. Ch. 14: p. 518 Ch. 15: p. 552 Update:
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationAutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationVersion 1.0. Forbes Credenza File Cabinet.
Version 1.0 Forbes Credenza File Cabinet www.fantasticfurniture.com.au Enjoy Your purchase from Australia s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2 Assembly checklist Read through
More information14 - Dimensioning. Dimension Styles & settings. Arrows tab.
14 - Dimensioning Dimensioning is always a complex topic in any CAD system because there are so many options and variables to deal with. progecad collects all the numerous settings together in the Dimension
More informationLevels. Chapter Nine PLAY VIDEO INTRODUCTION LEVEL MANAGER AND LEVEL DISPLAY DIALOGS LEVEL MANAGER DIALOG
Chapter Nine Levels PLAY VIDEO INTRODUCTION A design file consists of any number of levels. A level is a way of separating CAD data much the same way as a clear sheet of acetate is used by an architect
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationIsometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationQuick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
More informationIsometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
More informationCADPIPE Industrial Pipe. Tutorial
CADPIPE Industrial Pipe Tutorial Introduction This Tutorial is a brief introduction to the power of CADPIPE 3D DESIGN. We will show you a few key features and the general procedures for creating 3D piping
More informationSketch-Up Guide for Woodworkers
W Enjoy this selection from Sketch-Up Guide for Woodworkers In just seconds, you can enjoy this ebook of Sketch-Up Guide for Woodworkers. SketchUp Guide for BUY NOW! Google See how our magazine makes you
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationwith MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation
with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial
More informationAASHTOWare Bridge Rating Training. T6 Truss Cross Sections and Graphics (BrR 6.4)
AASHTOWare Bridge Rating Training T6 Truss Cross Sections and Graphics (BrR 6.4) This example describes how to define a Channelbox truss cross section with stacking plates on either side of channel webs
More informationSEMATIC DRAW DESIGN THE IDEAL DOORS FOR YOUR LIFT!
SEMATIC DRAW DESIGN THE IDEAL DOORS FOR YOUR LIFT! www.wittur.com Get started in 3 easy steps! 1 2 3 Register to Wittur website (www.wittur.com/website/reg_user.aspx) Log in and access Sematic Draw at
More informationARCHLine.XP Interior Windows. Learning Interior. Learning material for the basics of ARCHLine.XP Interior. ARCHLine.
ARCHLine.XP Interior 2010 Windows Learning Interior Learning material for the basics of ARCHLine.XP Interior ARCHLine.XP Interior Information in this document is subject to change without notice and does
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
More information< Then click on this icon on the vertical tool bar that pops up on the left side.
Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts
More informationSingle Mirror Cabinet
Single Mirror Cabinet Assembly Instructions - please keep for future reference YO886 464/3944 Dimensions Width - 35.5cm Depth - 16.5cm Height - 60cm Important Please read these instructions fully before
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationShelf Supports. Shelf Supports TENN-TEX
Whether your cabinet has 3/8 or 3/4 side panels with 1/4 or 5mm holes, we have the right shelf support for you. Choose from standard or locking designs, various pin lengths, colors and materials. We also
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationMontana Association of Registered Land Surveyors Conference 2013
AutoCAD CIVIL 3D Survey Features - Field to Finish This session is an introduction to the Civil 3D Survey Tools. We will cover some basics of working with Survey Databases and Automated Linework. We will
More informationEntrance Cabinet Plans
Entrance Cabinet Plans www.andrewharriswoodwork.com Page 1 of 19 Introduction I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then
More informationPart 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationPolyboard 6 WOOD. new features. designer
Polyboard 6 new features WOOD designer Legal Disclaimers All contents copyright 2016 Wood Designer Ltd. All rights reserved worldwide. No part of this document should be reproduced, transmitted or distributed
More informationTall Wide Extra Deep Bookcase
Tall Wide xtra Deep Bookcase Assembly Instructions - Please keep for future reference 8/650 Dimensions Width - 78cm Depth - 9cm Height - 180cm Important Please read these instructions fully before starting
More informationAdvanced Frameless Library Guide Advanced options keeping you ahead of the competition. Version 17
Advanced Frameless Library Guide Advanced options keeping you ahead of the competition Version 17 Introduction ADVANCED FRAMELESS LIBRARY GUIDE Hinge Setup Introduction Library Guide This library guide
More informationAutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationTutorial 2: Setting up the Drawing Environment
Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we
More informationAutoCAD 2020 Fundamentals
Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTECHNICAL MANUAL 1. ClicBox. Technical manual PATENTED TECHNOLOGY
TECHNICAL MANUAL 1 ClicBox Technical manual PATENTED TECHNOLOGY 2 UNICLIC system white finish (also available in lissa oak and ivory) chipboard STANDARD FEATURES No tools necessary Thanks to the UNICLIC
More informationLindab MagiCAD plugin for DIMcomfort, DIMsilencer och LindQST
Lindab MagiCAD plugin for DIMcomfort, DIMsilencer och LindQST Lindab supports its ICS Selection Tools integrated in MagiCAD. The benefit is the possibility to use Lindabs advanced calculation and presentation
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationCAD Standard Design Elements for Injection Molds
Transylvania University of Brasov, Romania 13 th INTERNATIONAL CONFERENCE STANDARDIZATION, PROTYPES AND QUALITY: A MEANS OF BALKAN COUNTRIES COLLABORATION Brasov, Romania, November 3-4, 2016 CAD Standard
More informationPro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The
More informationThe project focuses on the design for a Pencil holder, but could be adapted to any simple assembly.
Introduction - Teacher Notes Fig 1. The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Pro/DESKTOP enables pupils (and teachers) to communicate and model
More informationUsing Siemens NX 11 Software. Sheet Metal Design - Casing
Using Siemens NX 11 Software Sheet Metal Design - Casing Based on a YouTube NX tutorial 1. 1 https://www.youtube.com/watch?v=-siyi1vz87k A&M CAD in mechanical engineering 1 1 Introduction. Start NX 11
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationStratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a
More informationVCE VET FURNISHING (CABINET MAKING)
Victorian Certificate of Education 2003 SUPERVISOR TO ATTACH PROCESSING LABEL HERE VCE VET FURNISHING (CABINET MAKING) Section Written examination Friday 31 October 2003 Reading time: 3.00 pm to 3.15 pm
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationEDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING REVISED: FALL 2010 INSTRUCTOR: THOMAS ARPASI
INSTRUCTOR: THOMAS ARPASI REND LAKE COLLEGE CAD 1201-51 INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING 1 Pictoral Drawing Pictoral drawing have evolved from cave paintings to photorealistic
More informationDimension Properties. Student Web Site
Dimension Properties All sketch dimensions added to a sketch contain specific individual dimension properties. Most dimension properties are predefined by default or are specified in the Modeling Dimension
More information