Control Frame) Datum Target. 1 All rights reserved SpaceCAD Ltd
|
|
- Tracy Wilcox
- 5 years ago
- Views:
Transcription
1 ,.,.,,., : (Text Box) (Balloon) (Callout) (Connector) (Feature Control Frame) (Datum Frame) Datum Target (Surface Texture) 1
2 (Weld Symbol) (Center Mark) (Center Line) : ) Leader line ) Break line ) Terminator, (D) Annotation -,.. Callout Text,.,. :,, : Callout Show border outline. Text Leader. 2
3 .,.,. (), ().,., Alt,.,.,,.,, Alt+Ctrl,. Leader Break Line...., Alt.. 3
4 ,.,.,, Alt.,,.,,,, : M (), I (), C () E ().,,. text boxes. : balloon callout feature control frame datum frame datum target weld symbol Surface texture symbols Center mark, center line bolt hold circle connector, Properties. (feature control frame),,. (feature control frame), (weld symbol) (surface texture),. Solid Edge Draft,,,. Dimension Tracker,, ToolsDimensionsTrack Dimension Changes. 4
5 ,. Dimension Tracker,.,.., Select Symbols and Values,., :,,. 1.., PMI Annotation Callout. 2.,. 3. : o Symbols and Values Select Symbols and Values: a. Symbols and Values,,. b. (Text box). <unresolved property text value>() Preview. c. OK,. o,. 1.,.,, (A) (B). 5
6 2.,.. callout, balloon surface texture symbol., (A) (B).,, (B). (A),., (B). (A),, (B). (A) (B), (B). 6
7 (terminator ) (A), (B)., (C).,. () (A),, Alt, (B).,,.,, Alt + Ctrl,.,.,,,.,.,,,. 7
8 Callout. Callout Properties,. :.,.. Callout Callout Properties, :... Formatting callout text and border.,,... :.,. Draft, Disabled element color, Colors Solid Edge Options. PMI, Sketch color. 8
9 , Callout Callout Properties.,., Preview Callout Properties. Border (Callout Properties ) : Show border outline. Gap between border and text. Color Line width Text and Leader.. Callout text Callout text 2 General (Callout Properties ),. Fixed width Wrap text Border. Position Callout, callout :. Border (Callout Properties ), callout callout, callout : 9
10 Fit width to contents callout callout., -. Text. Fixed width property text,,., : o o Wrap text. Automatically adjust aspect ratio,.. : Comments Summary (File Properties ) Notes callout property text : %{Comments model.par} property text,., Fixed Width Wrap text,.,, Width. Callout Properties Text and Leader, : Aspect ratio,..,. : Text scale,., 1.0,., 10
11 Horizontal Alignment, Parallel Text Invert Text Callout : Horizontal Alignment. Left, Right Center. Parallel Text,. Invert Text. Horizontal Alignment.,,. (A). <Alt>. (B) (C) <Alt+Ctrl>.,..... (D),,... 11
12 ,.,.,.,,, ().,.,. 12
13 ,. Parts List Auto-Balloon Parts List.,,,.,., Automatically Add Balloons to a Part View., Auto- Balloon Balloon (Parts List Properties ).,,,,. Balloon Parts List Properties).,,,, Text Size,.,.,. :.., Make Active., Balloon Balloon: Link To Parts List,. Item Number,. Item Number,. Item Count,.., Item Number (Parts List Properties)., Options (Parts List Properties).,,,.,,. 13
14 ,, Property Text Balloon, Select Property Text. (A), (B), (C) (D) Text, Lower, Prefix Suffix Balloon. : (A), Item Number Balloon.,, Show Document Properties in Balloons. (Stacking balloons),,.,,,,. Automatically stack balloons Balloon (Parts List Properties ),.,.,,,..,. 14
15 ., -. (E). (A). 15
16 (B) (C)..,,.,.. (D). <Alt>. <Alt+Ctrl>,. (E).,. 1. Parts List: Parts List, : 16
17 a. Auto-Balloon. b. Properties. 4. Balloon ( Parts List Properties), : o o o ( ),,,,., List Properties. 6. : o : a. Place List. b.,,. o : a. Place List. b.., Balloon Parts List... Balloon. 17
18 1. Parts List,, Fastener System. 2. Parts List: a. Auto-Balloon. b. Properties. 3. Balloon ( Parts List Properties): a. Automatically stack balloons in the selected drawing view. b. Orientation. 4.,., Show fastener system stack.,.. 1.,,.,. :,. o o,.,. 2..,..,.,, : o, 3. 18
19 o, Alt,,..,,,.. :,,. 3. Balloon Prefix Suffix, : a.. : (1) 9 15,. b. Parts List Quantity Property Text,. :,, Parts List Quantity Property Text,. c. Property Text, Select Property Text,.,.,. 4., Alt,. 5.,.,,. (A), (B), (C) (D). 19
20 1. PMI Annotation Balloon. 2. Balloon Shape. 3. Balloon Shape. 4. Balloon,,. o (A) Upper. : Upper, Item Number. o o o (B) Lower. (C) Prefix. (D) Suffix. 5. Balloon Property Text. 6. Select Property Text. 7. Properties, Select. Property Text. :, 6: Graphic Connection to Part Document Number Properties 7., : %{Document Number GP}. 8. OK, Select Property Text.,. 9., ,.,,.,, Draft,., 2D Model,. 20
21 ,,. Angle Between,., center line, center mark bolt hole circle. center lines center marks,. Home Annotation. Automatic Center Lines,,. Center Line. Center Mark,,,. Bolt Hole Circle. center lines, center marks bolt hole circles,. Properties., Delete., Automatic Center Lines,, Remove Lines and Marks Automatic Center Lines command bar.,,, Error Dimension General (Dimension Style ). Dimension Tracker.,.,, Driven Dimension. 21
22 Center Mark :,,, Angle Between Horizontal/Vertical Orientation Dimension. Angle Between. Center Line, Center Line:.,. : Center Line,,. : 22
23 ,, Arc.,, Symmetric Offset Offset Arc Symmetric Offset Options.,. By 2 Lines, By 2 Points., By 2 Lines (A),, (B)., By 2 Points,., Alt+. Leader ( ).., Alt. 23
24 Edge Condition.,,.,. Edge Condition Properties,,,., : ISO/DIN. ISO/DIN : ISO/DIN : : Drawing Standards Solid Edge Options. 24
25 1. Text. 2. : o o (text box),,.. (text string),.,. 3.. Text ( text box) (text string).,,.,.,,,.,.,, Text Control Text: Fixed Adjust Aspect Ratio Fixed Wrap Text., Stack AutoStack,.,.,,. 25
26 ,,,.,, Indentation Indents and Spacing Text Box Properties., Text Bullets and Numbering Text Box Properties.,,... Draft, Disabled element color Colors ( Solid Edge Options)., Stack AutoStack,,., (subscript superscript) 1.,. 2. Text Stack. 3. Stack, Style : Stacked, Skewed, Tolerance Linear,. 4. OK.,. :, Stack Align. 1. Text Stack. 26
27 : Stack. 2. Upper. 3. Lower. 4. Stack, Style,. :,., Stack., 1. Enter Tab. o / o # o ^ : 1/2 Enter. 2. AutoStack: a. Automatically stack text expressions 1/2, 1#2, and 1^2 as you type. b. Convert,,,.,. : (^), Convert 1^2 to: Tolerance., 3^4, : Stack : : Stacked Skewed Tolerance 27
28 Stack : : Linear : AutoStack,, Do not show this dialog again. (superscript subscript) 1. Text,,. 2., (superscript) (subscript). 3. Text Stack. 4. Stack : o (superscript) a. Upper. b. Styles Tolerance. o (subscript) a. Lower. b. Styles Tolerance. Text Text Box Properties,. 1. Text,,. 2. Text Bullets and Numbering : o o Bullet. Numbering. 28
29 3. Enter.,. 4. Enter,. 1. (text box) (text string),. 2. Text Bullets and Numbering. 3. : o Bullet. o Numbering. 1., Enter,. 2. Text Bullets and Numbering. 3. Bullets and Numbering No List... : : : 1.,. 2. Text Properties. 3. Bullets and Numbering Text Box Properties Start at. 4.,. 5. Text Bullets and Numbering. 6. Restart Numbering. 29
30 . 1.,.,.,,. 2. Text Text Color. 3.,. :,.,. 1. Home Dimension Line Up Text Line Up Text: o. : Vertical Left ( ), Vertical Center ( ), Vertical Right ( ), Horizontal Top ( ), Horizontal Center () Horizontal Bottom (). o break point alignment method. : Vertical Break Point Horizontal Break Point. 4. () () ,,,.,, Word.,,. TrueType ; TrueType,.. 30
31 . 1. Text,.,. 2. Text Insert Character. 3. Character Map Font. 4.,., Advanced View,., Help Character Map. 5. Select. : Characters To Copy,, Select. 6.,, Select. 7. Character Map, Copy,. 8.,. 9. Ctrl+V, Draft.,,.,.,,,. Draft, : Feature Control Frame, datums. Datum Frame.,, Datum Frame. : Solid Edge ASME Y ANSI ISO. between statistical tolerance TrueType. (Feature Control Frame) Feature control frame,..,. 31
32 feature control frame,..,. Feature control frame : ) ) ) (D) ) (F) feature control : feature control frame.,. 32
33 Feature Control Frame Feature Control Frame,,. Feature control frame (A). <Alt>. <Alt+Ctrl>,. (B), Move an annotation.,.. :.., Move an annotation. (C) (C):. feature control frame., feature control frame 90, ,. Feature control frame, feature control frame. Alt (C). Feature control frame Alt+ (C) Alt (C): 33
34 Feature control frame ( D, ). feature control frame. (D) Alt (C) :,.,. (feature control frame) (datum frame) 1. : o Feature Control Frame. o Datum Frame. 2. : o o Feature Control Frame Properties OK,. Datum Frame Properties Datum Frame Properties. 3.,,. o o, Leader., Angle Feature Control Frame.,, Leader,. 5.,. 34
35 Feature Control Frame Feature Control Frame. Feature control frame Orientation Feature Control Frame,,. :,,. feature control frame, :.,. Angle,.,.. Feature control frame Feature control frames,. Feature Control Frame Properties,. General ( Feature Control Frame) feature control frame. feature control frame., : Define feature control frame content Example: Add symbols to a feature control frame Feature control frame,,,,. 35
36 ,.., Alt,. : Manipulating feature control frames. datum frame feature control frame (1),, (2). Feature control frame,.. (Feature control frame) 1. Feature Control Frame. 2. Feature Control Frame Properties. 3.,. Surface Texture Symbol,..,,.. 36
37 GOST, GOST weld symbol Drawing Standards Solid Edge Options. Weld Symbol.,.,,. (A), (B). 37
38 :, ANSI/ISO/DIN GOST, Drawing Standards Solid Edge Options. assembly Draft, assembly., fillet weld, groove weld weld label assembly. Tie to Geometry,, assembly,. property text Property text,,. Property text. Select Property Text. property text,. Solid Edge property text.,,. property text,. Select Symbols and Values., property text,,,. property text? property text,,, datum frames feature control frames. property text (PMI), callouts, ball., property text. property text Variable Table. Property text callouts, balloons. Select Property Text,, Property Text. Callout Properties, Balloon Balloon Parts List Properties., property text. Columns Parts List Properties File Properties Material Table. property text property text Select Property Text, property text. Company, Project, Revision Number, Document Status Last Printed Date. : 38
39 ,, From Active Document, Property text source (Source: From Active Document). property text Select Symbols Values Callout Properties, property text.,. property text : Basic property text rules Property text codes for annotation and dimension text Format codes to modify property text output Date and time format of property text Variable Table property text property text, Variable Table,., Goal Seek. property text Property text (, ). property text Update All Property Text PMI Home. property text property text, : %{PropertyText/xx/xx/xx} property text %{ } Property text %XX, %XX property text. property text,, /xx, format control codes property text. property text: %{PropText/xx/xx/xx}. : :, : %DI %{%HS/@2/st+.001^-.002/du} [(Hole Size /2 decimal places) (stacked tolerances +.001,-.002)] and dual units applied to all. property text. \,. 39
40 /xx property text,. : o, %HC : %HC=%DI%HS%ZH%RTC'BORE%DI%BS-%BDDEEP o,, : %HC=%DI{%HS/DU}%ZH%RTC'BORE%DI%BS-%BDDEEP property text., Callout Dimension Prefix,,.,,,., true Surface Texture Symbol. : / Symbols / Values,.. Solid Edge ANSI Symbol Solid Edge ISO Symbol. / Symbols %FL Flatness %SR %CI Straightness Circularity %CY %PP %AN %PR %PS %PL Cylindricity Perpendicularity Angularity Parallelism Profile of a Surface Profile of a Line 40
41 %CR Circular Runout %TR Total Runout %PO Position %CO Concentricity %SY Symmetry Material %MC Maximum %LC Least %SC Regardless of Feature Size %RC Reciprocity Condition %PZ Projected %TZ Tangent Plane %FZ Free State %ER Envelope Requirement %UD Profile Unequally Disposed %IN Independency %TL Translation %DI Diameter %DG Degree 41
42 %BT %ST Between Statistical Tolerance %CF Continuous Feature %SQ Square %CB Counterbore %SF Spotface %CS %DP %IL %AL %PM %TA Countersink Depth Initial Length Arc Length Plus Minus Taper Angle %A2 Taper Angle 2 %A3 Taper Angle 3 %A4 Taper Angle 4 %SG Symmetric Taper Angle %S2 Symmetric Taper Angle 2 %Gd :. Material Thickness GOST %FW Fillet Weld %HW Heat %HB Heat Back %SW Smooth %SB Smooth Back 42
43 %SN Stagger Chain %SK Stagger Check %UL Not All Around %NU Number %DA Diameter %PN Plus Minus %DR Degree GOST %CL Centerline %PT Parting Line %OV Oval %RL Rectangle %RA Rotated View (ESKD standard) %CA Rotated View Counterclockwise (GB standard) %C2 Rotated View Clockwise (GB standard) Hole %HC Hole Callout, : %HS Hole Size < Hole Size Value> %HD Hole Depth < Hole Depth Value> %BS Counterbore Size < Counterbore Size Value> %BD Counterbore Depth < Counterbore Depth Value> %SS Countersink Size <Countersink Size Value> %SA Countersink Angle %TS Thread Size %TD Thread Depth %TD Thread Depth <Countersink Angle Value> <Thread Size Value> <Thread Depth Value> <Thread Depth Value> 43
44 %ZH %ZT Smart Hole Depth Smart Thread Depth <Smart Hole Value> <Smart Thread Depth Value> %BA Bend Angle <Bend Angle Value> %BN Bend Angle Unsigned <Bend Angle Unsigned Value> %IA Included Angle <Bend Inside Angle Value> %BR Bend Radius <Bend Radius Value> %BO Bend Direction <Bend Direction Value> %BI Bend Sequence <Bend Sequence Number> %BQ Bend Quantity <Number of Bends> Drawing View %VA View Annotation Name <View Annotation Name> %LN Annotation Sheet Number <View Annotation Sheet Number> %VS View Scale <Drawing View Scale Value> %VR Angle of Rotation <Drawing View Rotation Angle> %VN Drawing View Sheet Number <Drawing View Sheet Number> Weld Bead %TT Target Thickness <Weld Bead Target Thickness Value> %GL Gap Length <Weld Bead Gap Length Value> %BL Bead Length <Weld Bead Length Value> %NB Number of Beads <Number of Weld Beads> %PI Pitch <Weld Bead Pitch Value> %RT Carriage Return. property text property text, (format code, /xx),. %{PropertyText/xx/xx/xx} /ST superscript subscript. 44
45 /NU : /nu /@n /du /@ /STSuperscript^Subscript : /ST. /ST±upper^±lower /st±.001^±.002. : /ST. /LT±upper^±lower /lt±.001^±.002. %{Density/NU G} n, property text.,. ( ) [ ]., : YYYY2010 yy10 MMMMMarch MM03 ddddmonday dddmon dddate (1 31) : Superscript ) Subscript ) (Superscript Subscript)., upper and/or lower( ) ^ ±.001 ±.002. ^, (upper)., (upper and/or lower). ^ ±.001 ±.002. %{%HS/@2} 12,12 %DI%{%HS/DU} %{Created/@yyyy MMMM}, : Date and time format of property text. %{/ST1^2} %{/STYes^No} (Upper) %[%HS/ST+.02} (Lower) %{%HS/ST^.02} (upper lower) %{%HS/ST+.02^-.03} %DI %{%HS/LT^-.25}. Nominal HS=5.28 %DI %{%HS/LT+.05^+.01} Nominal HS=12.12 %DI %{%HS/@4/LT+.05^+.01}. Nominal HS= July /TCn Property text UPPERCASE FILE NAME 45
46 n. TC1UPPERCASE TC2lowercase TC3Sentence case TC4Title Case %{File name/tc1} lowercase %{File name/tc2} Sentence case %{File name/tc3} file name File name Title Case %{File name/tc4} File Name /cp (Custom property) Custom Properties File Properties. Solid Edge. %{Title/cp} Custom Properties 46
DRAFT Solid Edge ST4 Update Training Draft
DRAFT Solid Edge ST4 Update Training Draft Presented by: Steve Webb Topics Parts List Table Titles Column Headers Headers Merging Header Rotate Cell Aspect Ratio Cell Formatting Overriding Disabled Cells
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationUser Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
More informationWelcome to Solid Edge University
#SEU15 Welcome to Solid Edge University Realize innovation. State-of-the-Art Drafting, Made Even Better Investing in What You Need General Workflow Dimension Enhancements Annotation Enhancements Page 2
More informationTest Answers and Exam Booklet. Geometric Tolerancing
Test Answers and Exam Booklet Geometric Tolerancing iii Contents ANSWERS TO THE GEOMETRIC TOLERANCING TEST............. 1 Part 1. Questions Part 2. Calculations SAMPLE ANSWERS TO THE GEOMETRIC TOLERANCING
More informationChapter 2: Dimensioning Basic Topics Advanced Topics Exercises
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationGeometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing (Known as GDT) What is GDT Helps ensure interchangeability of parts. Use is dictated by function and relationship of the part feature. It does not take the place
More informationGeometric dimensioning & tolerancing (Part 1) KCEC 1101
Geometric dimensioning & tolerancing (Part 1) KCEC 1101 Introduction Before an object can be built, complete information about both the size and shape of the object must be available. The exact shape of
More informationContents. Notes on the use of this publication
Contents Preface xxiii Scope Notes on the use of this publication xxv xxvi 1 Layout of drawings 1 1.1 General 1 1.2 Drawing sheets 1 1.3 Title block 2 1.4 Borders and frames 2 1.5 Drawing formats 2 1.6
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning
More informationME Week 2 Project 2 Flange Manifold Part
1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is
More informationSet your drafting standard and drawing preferences
DRAFTING The Drafting application is designed to allow you to produce and maintain industry standard engineering drawings directly from the 3D model or assembly part. Drawings created in the Drafting application
More informationthe same information given in two different 1. Dimensions should NOT be duplicated, or Dimension Guidelines Incorrect ways.
Dimension Guidelines 1. Dimensions should NOT be duplicated, or the same information given in two different ways. Incorrect 1. Dimensions should NOT be duplicated, or the same information given in two
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationEngineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
More informationTo start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals
More informationINDEX. Datum feature symbol, 21
INDEX Actual Mating Envelope, 11 Actual Minimum Material Envelope, 11 All Around, 149 ALL OVER, 157, 158,363 Allowed vs. actual deviations from true position, 82 Angularity, 136 axis, 140 line elements,
More informationDFTG-1305 Technical Drafting Prof. Francis Ha
DFTG-1305 Technical Drafting Prof. Francis Ha Session 5 Dimensioning Geisecke s textbook: 14 th Ed. Chapter 10 p. 362 15 th Ed. Chapter 11 p. 502 Update: 17-0508 Dimensioning Part 1 of 2 Dimensioning Summary
More informationAutoCAD and Its Applications BASICS Reference Material. Drafting Symbols
AutoCAD and Its Applications BASICS Reference Material Drafting Symbols Symbols provide a common language for drafters all over the world. owever, symbols are meaningful only if they are drawn according
More informationGeometric Tolerances & Dimensioning
Geometric Tolerances & Dimensioning MANUFACTURING PROCESSES - 2, IE-352 Ahmed M. El-Sherbeeny, PhD KING SAUD UNIVERSITY Spring - 2015 1 Content Overview Form tolerances Orientation tolerances Location
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationGeometric Boundaries II
Geometric Boundaries II Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Inch and Metric Units) Based on ASME Y14.5-2009 (R2004) Written and Illustrated by Kelly L. Bramble
More informationSOLIDWORKS 2018 Basic Tools
SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationAppendix R5 6. Engineering Drafting. Broken View
Updating Using Autodesk Inventor to Release 5 Appendix R5 6 Engineering Drafting Chapter 6 delineates the concepts of engineering drafting. You output orthographic views from solid parts and orthographic
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationShaft Hanger - SolidWorks
ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN Shaft Hanger - SolidWorks BY: DR. HERLI SURJANHATA ASSIGNMENT Submit TWO isometric views of the Shaft Hanger with your report, 1. Shaded view of the trimetric
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationProduct and Manufacturing Information (PMI)
Product and Manufacturing Information (PMI) 1 Yadav Virendrasingh Sureshnarayan, 2 R.K.Agrawal 1 Student of ME in Product Design and Development,YTCEM -Bhivpuri road-karjat, Maharastra 2 HOD Mechanical
More informationCertified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
More informationRotational Patterns of Sketched Features Using Datum Planes On-The-Fly
Rotational Patterns of Sketched Features Using Datum Planes On-The-Fly Patterning a sketched feature (such as a slot, rib, square, etc.,) requires a slightly different technique. Why can t we create a
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationSolidWorks 2014 Part I - Basic Tools
SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationGeometric Boundaries
Geometric Boundaries Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Customary Inch System) Based on ASME Y14.5M-1994 Written and Illustrated by Kelly L. Bramble Published
More informationENGINEERING GRAPHICS ESSENTIALS. (A Text and Lecture Aid) Second Edition. Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS
ENGINEERING GRAPHICS ESSENTIALS (A Text and Lecture Aid) Second Edition Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationDimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
More informationAEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
More informationAlternatively, the solid section can be made with open line sketch and adding thickness by Thicken Sketch.
Sketcher All feature creation begins with two-dimensional drawing in the sketcher and then adding the third dimension in some way. The sketcher has many menus to help create various types of sketches.
More informationGeometry Controls and Report
Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for
More information1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity
Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationDrawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
More informationProduct and Manufacturing Information(PMI)
Product and Manufacturing Information(PMI) Ravi Krishnan V 1 Post Graduate Student Department of Mechanical Engineering Veermata Jijabai Technological Institute Mumbai, India ravi.krishnan30@gmail.com
More informationBelow are the desired outcomes and usage competencies based on the completion of Project 4.
Engineering Design with SolidWorks Project 4 Below are the desired outcomes and usage competencies based on the completion of Project 4. Project Desired Outcomes: An understanding of the customer s requirements
More informationEngineering Design with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
Engineering Design with SolidWorks 2003 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com
More informationSOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
More informationEngineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationBeginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationLaboratory Exercises
Laboratory Exercises 4 : 1 Lab 1A Inverted T Inverted T. Draw the solid object shown. Place the origin at the intersection of the faces with the holes in them. The front face is marked for you. Make sure
More informationEngineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationRelease Highlights for BluePrint-PCB Product Version 2.0.1
Release Highlights for BluePrint-PCB Product Version 2.0.1 Introduction BluePrint Version 2.0.1 is a rolling release for BluePrint V2.0. BluePrint rolling releases are delivered as needed and allow us
More informationProduct Modelling in Solid Works
Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve
More informationCHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.
More informationIntroduction to Revolve - A Glass
Introduction to Revolve - A Glass Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Prerequisite Knowledge Previous knowledge of the following commands are required
More informationIntroduction to Sheet Metal Features SolidWorks 2009
SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationDimensioning part 1 with SolidWorks. ENGR 1182 SolidWorks 08
Dimensioning part 1 with SolidWorks ENGR 1182 SolidWorks 08 Today s Objectives Formal Drawing Components: Dimensioning with SolidWorks SW08 Activity SW08 Application Formal Drawings Definition: Detailed
More informationFunctional Tolerancing and Annotations
Functional Tolerancing and Annotations Preface Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-2000. All rights reserved. Preface CATIA
More informationDigital Camera Exercise
Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document
More informationTo help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD
To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and
More informationGenerative Drafting (ISO)
CATIA Training Foils Generative Drafting (ISO) Version 5 Release 8 January 2002 EDU-CAT-E-GDRI-FF-V5R8 1 Table of Contents (1/2) 1. Introduction to Generative Drafting Generative Drafting Workbench Presentation
More informationFOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards
Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately
More informationME 114 Engineering Drawing II
ME 114 Engineering Drawing II FITS, TOLERANCES and SURFACE QUALITY MARKS Mechanical Engineering University of Gaziantep Dr. A. Tolga Bozdana Assistant Professor Tolerancing Tolerances are used to control
More informationCATIA Instructor-led Live Online Training Program
Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the
More informationPart 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
More informationToothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
More information2016 Academic Challenge
2016 Academic Challenge ENGINEERING GRAPHICS TEST REGIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Mark
More informationSolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
More informationElementary Dimensioning
Elementary Dimensioning Standards Institutions ANSI - American National Standards Institute - creates the engineering standards for North America. ISO - International Organization for Standardization -
More informationPart Design Fundamentals
Part Design Fundamentals 1 Course Presentation Objectives of the course In this course you will learn basic methods to create and modify solids features and parts Targeted audience New CATIA V5 Users 1
More informationDrawing and Detailing with SolidWorks. A Workbook for SolidWorks 2001/2001Plus. by David C. Planchard and Marie P. Planchard
Drawing and Detailing with SolidWorks A Workbook for SolidWorks 2001/2001Plus by David C. Planchard and Marie P. Planchard A Competency Based Approach Referencing the ASME Y14 Engineering Drawing and Related
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationTable of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.
Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA
More information2007 Academic Challenge
2007 Academic Challenge ENGINEERING GRAPHICS TEST - STATE FINALS This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationDUE DATE: Friday 4/6/2018 at 3:30 PM
MECH 130 SPRING 2018 CAD LAB 4 FINAL REVISION HARDCOPIES NEEDED DUE DATE: Friday 4/6/2018 at 3:30 PM After the revised hitch, the ball and the pin parts were created from the Handout call LAB4 PART Creation,
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationAnswers to Questions and Problems
Fundamentals of Geometric Dimensioning and Tolerancing Using Critical Thinking Skills 3 rd Edition By Alex Krulikowski Answers to Questions and Problems Second Printing Product #: 1103 Price: $25.00 Copyright
More informationCreo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School
Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,
More informationRelease Notes - Fixes in Tekla Structures 2016i PR1
Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower
More informationStandards for Your Career Field
Dimensioning Dimensions Dimensions are used to describe the sizes and relationships between features in your drawing. Dimensions are used to manufacture parts and to inspect the resulting parts to determine
More informationEngineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationLaboratory Demonstration Exercises
Laboratory Demonstration Exercises 3-1 Lab Demo 1 - Plus Block Open SolidWorks, click on new document part OK. Right Click on Front Plane, click on Sketch icon (pencil w/ axes). In the sketch toolbar on
More informationWEEK 5: Shaft Modeling (C51X01, C51X02) Revolved Features, Chamfer
WEEK 5: Shaft Modeling (C51X01, C51X02) Revolved Features, Chamfer 1. Creating the Shaft Model 1. File> New> Part, Name: C51X01> OK 2. Insert> Revolve> Placement> Define> select TOP datum plane> Sketch
More informationBasic Features. In this lesson you will learn how to create basic CATIA features. Lesson Contents: CATIA V5 Fundamentals- Lesson 3: Basic Features
Basic Features In this lesson you will learn how to create basic CATIA features. Lesson Contents: Case Study: Basic Features Design Intent Stages in the Process Determine a Suitable Base Feature Create
More informationAutoCAD Inventor - Solid Modeling, Stress and Dynamic Analysis
PDHonline Course G280 (15 PDH) AutoCAD Inventor - Solid Modeling, Stress and Dynamic Analysis Instructor: John R. Andrew, P.E. 2012 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationUsing Siemens NX 11 Software. Sheet Metal Design - Casing
Using Siemens NX 11 Software Sheet Metal Design - Casing Based on a YouTube NX tutorial 1. 1 https://www.youtube.com/watch?v=-siyi1vz87k A&M CAD in mechanical engineering 1 1 Introduction. Start NX 11
More informationGaging Exploration (Applications)
Gaging Exploration (Applications) PMPA Technical Conference Tomorrow is Today - Conquering the Skills Challenge Chicago, IL April 24, 2018 Gary K. Griffith Corona, California Gary K. Griffith 50+ Years
More informationRotational Patterns of Pick and Place Features
Rotational Patterns of Pick and Place Features The most efficient way to create multiple copies of one feature is to use the patterning function. Not only is it faster, but dimensioning is simplified,
More informationIDEA Connections. User guide
IDEA Connections user guide IDEA Connections User guide IDEA Connections user guide Content 1.1 Program requirements... 4 1.1 Installation guidelines... 4 2 User interface... 5 2.1 3D view in the main
More information