Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Form: 501

Size: px
Start display at page:

Download "Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Form: 501"

Transcription

1 Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 1 Description: Test 4 A (Diagrams) Form: 501 Please use the following figure for this question. 1. In the GEOMETRIC CONSTRUCTION in Figure D , point ""B"" is a/an: A. Point of tangency. B. Radius point. C. Endpoint. D. Midpoint. Figure D In Figure D , ""CHORD"" is illustrated at:

2 Figure D Which triangle in Figure D is an EQUILATERAL triangle? Figure D The GEOMETRIC CONSTRUCTION in Figure D is used to draw a/an: A. Ellipse. B. Arc tangent to a straight line and existing arc. C. Straight line tangent to two arcs. D. Arc through three given points. Figure D

3 5. In the UNFINISHED GEOMETRIC CONSTRUCTION in Figure D , the NEXT STEP is to: A. Draw an arc with a radius of AB. B. Locate the points of tangency. C. Bisect line BC. raw an arc with a radius of BC. 6. If the construction circle in Figure D has a 2"" diameter, then the hexagon measures 2"" across the: A. Corners. B. Chord. C. Segment. D. Flats. Figure D In the GEOMETRIC CONSTRUCTION in Figure D , point ""B"" is: point of tangency. B. The endpoint of a line. C. The radius point. D. Found by drawing lines perpendicular to the given lines.

4 8. The figure illustrated below is a/an: A. Decagon. B. Hexagon. C. Octagon. D. Pentagon. 9. The following figure is an example of which CAD command? A. Line B. Arc C. Polygon D. Polyline 10. If the construction circle below has a 1"" radius, then the hexagon measures 2"" across the: A. Corners. B. Chord. C. Segment. D. Flats.

5 11. The GEOMETRIC CONSTRUCTION in Figure D is used to draw an Arc tangent to a/an: A. Obtuse angle. B. Right angle. C. Acute angle. D. Bisector. 12. The shape shown below is a: A. Ellipsoid. B. Ring. C. Sphere. D. Torus. 13. The figure illustrated below is a/an: A. Decagon. B. Hexagon. C. Octagon. D. Pentagon.

6 Figure D Which triangle in Figure D is an ISOSCELES triangle? 15. The GEOMETRIC CONSTRUCTION below shows how to: A. Bisect a line. B. Draw an equilateral triangle. C. Draw an isosceles triangle. raw a scalene triangle. A B C D Figure D Which polygon in Figure D is NOT EQUILATERAL?

7 17. In Figure D , the PRISM is shown at: Please use the following graphic for questions 18 through 19: Figure D Which polygon in Figure D is a trapezoid? 19. Which polygon in Figure D is a rhombus? A B C D Figure D

8 20. Which polygon in Figure D is a PENTAGON? 21. The GEOMETRIC CONSTRUCTION below shows how to: A. Bisect a line. B. Draw an equilateral triangle. C. Draw an isosceles triangle. raw a scalene triangle. 22. The GEOMETRIC CONSTRUCTION in Figure D shows how to draw a hexagon across the: A. Bisectors. B. Flats. C. Edges. D. Corners.

9 Figure D To FINISH the GEOMETRIC CONSTRUCTION in Figure D : A. Draw a straight line to points AC. B. Draw an arc with radius AC. C. Draw straight line from points AC and bisect it. D. Use B as a center point and draw arc AC. 24. The GEOMETRIC CONSTRUCTION below is used to draw an Arc tangent to a/an: A. Obtuse angle. B. Right angle. C. Acute angle. D. Bisector. Figure D

10 25. Which triangle in Figure D is a SCALENE triangle? A B C D Figure D Which polygon in Figure D is a HEXAGON? 27. To construct the hexagon to the exact dimension shown below, you would: A. Use the inscribe method. B. Need to know the size of one side. C. Use the circumference method. D. Use the circumscribe method.

11 28. Which of the symbols in Figure D represents the word PARALLEL? Figure D In Figure D , ""DIAMETER"" is illustrated at:

12 30. In the UNFINISHED GEOMETRIC CONSTRUCTION in Figure D , the NEXT STEP is to: A. Draw an arc with a radius of AB. B. Locate the points of tangency. C. Bisect line BC. raw an arc with a radius of BC. Figure D Which polygon in Figure D is a square? Figure D Which triangle in Figure D is a RIGHT triangle?

13 Figure D In the GEOMETRIC CONSTRUCTION in Figure D , point ""A"" is a/an: A. Point of tangency. B. Center point. C. Endpoint. D. Midpoint. 34. In Figure D , the SPHERE is shown at: 35. The GEOMETRIC CONSTRUCTION below shows how to: A. Bisect a line. B. Draw an equilateral triangle. C. Draw an isosceles triangle. raw a scalene triangle.

14 36. Which of the symbols in Figure D represents the word PERPENDICULAR? 37. The HYPOTENUSE of triangle BCD is: B B. AC C. AD D. CB HYPOTENUSE of triangle BCD is:

15 Figure D The GEOMETRIC CONSTRUCTION in Figure D is used to draw an Arc tangent to a/an: A. Obtuse angle. B. Right angle. C. Acute angle. D. Bisector. 39. The figure illustrated below is a/an: A. Decagon. B. Hexagon. C. Octagon. D. Pentagon.

16 40. The drawing equipment is being used to construct a/an: A. Hexagon. B. Octagon. C. Pentagon. D. Torus. 41. The GEOMETRIC CONSTRUCTION below shows how to bisect a/an: ngle. B. Arc. ircle. D. Line. Figure D In Figure D , ""Tangent"" is illustrated at:

17 Figure D In the GEOMETRIC CONSTRUCTION in Figure D , point ""A"" is: point of tangency. B. The endpoint of a line. C. The radius point. D. Found by drawing lines perpendicular to the given lines. 44. The GEOMETRIC CONSTRUCTION below shows how to: A. Bisect a line. B. Make a parallelogram. C. Develop a pentagon. ivide a line into equal parts.

18 45. In the GEOMETRIC CONSTRUCTION in Figure D , distances AB and AC are equal to: known radius. B. A known circumference. C. The diameter. D. The square root of 2. Figure D The GEOMETRIC CONSTRUCTION in Figure D is used to draw a/an: rc tangent to two circles. B. Arc tangent to a straight line and existing circle. C. Straight line tangent to two arcs. D. Arc through three given points. Figure D Which polygon in Figure D is a rectangle?

19 Figure D In Figure D , ""Radius"" is illustrated at: 49. In the figure below, point ""B"" is known as a: A. Chord. B. Vertex. C. Point of tangency. D. Secant. 50. The shape shown below is a: A. Ellipsoid. B. Sphere. C. Torus. D. Truncated cone.

20 51. To construct the hexagon to the exact dimension shown below, you would: A. Use the inscribe method. B. Need to know the size of one side. C. Use the circumference method. D. Use the circumscribe method. A B C D Figure D Which polygon in Figure D is an OCTAGON?

Geometry by Jurgensen, Brown and Jurgensen Postulates and Theorems from Chapter 1

Geometry by Jurgensen, Brown and Jurgensen Postulates and Theorems from Chapter 1 Postulates and Theorems from Chapter 1 Postulate 1: The Ruler Postulate 1. The points on a line can be paired with the real numbers in such a way that any two points can have coordinates 0 and 1. 2. Once

More information

Geometry For Technical Drawing Chapter 4

Geometry For Technical Drawing Chapter 4 Geometry For Technical Drawing Chapter 4 Sacramento City College EDT 300/ENGR 306 EDT 300/ENGR 306 1 Objectives Identify and describe geometric shapes and constructions used by drafters. Construct various

More information

Elementary Geometric Drawings Angles. Angle Bisector. Perpendicular Bisector

Elementary Geometric Drawings Angles. Angle Bisector. Perpendicular Bisector Lessons and Activities GEOMETRY Elementary Geometric Drawings Angles Angle Bisector Perpendicular Bisector 1 Lessons and Activities POLYGONS are PLANE SHAPES (figures) with at least 3 STRAIGHT sides and

More information

1 st Subject: 2D Geometric Shape Construction and Division

1 st Subject: 2D Geometric Shape Construction and Division Joint Beginning and Intermediate Engineering Graphics 2 nd Week 1st Meeting Lecture Notes Instructor: Edward N. Locke Topic: Geometric Construction 1 st Subject: 2D Geometric Shape Construction and Division

More information

3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm.

3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm. 1 In the diagram below, ABC XYZ. 3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm. Which two statements identify

More information

Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design)

Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design) Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design) DFTG-1305 Technical Drafting Instructor: Jimmy Nhan OBJECTIVES 1. Identify and specify basic geometric elements and primitive

More information

Geometer s Skethchpad 8th Grade Guide to Learning Geometry

Geometer s Skethchpad 8th Grade Guide to Learning Geometry Geometer s Skethchpad 8th Grade Guide to Learning Geometry This Guide Belongs to: Date: Table of Contents Using Sketchpad - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

More information

1. Construct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. Begin with line segment XY.

1. Construct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. Begin with line segment XY. 1. onstruct the perpendicular bisector of a line segment. Or, construct the midpoint of a line segment. 1. egin with line segment. 2. lace the compass at point. djust the compass radius so that it is more

More information

is formed where the diameters intersect? Label the center.

is formed where the diameters intersect? Label the center. E 26 Get Into Shape Hints or notes: A circle will be folded into a variety of geometric shapes. This activity provides the opportunity to assess the concepts, vocabulary and knowledge of relationships

More information

PENNSYLVANIA. List properties, classify, draw, and identify geometric figures in two dimensions.

PENNSYLVANIA. List properties, classify, draw, and identify geometric figures in two dimensions. Know: Understand: Do: CC.2.3.4.A.1 -- Draw lines and angles and identify these in two-dimensional figures. CC.2.3.4.A.2 -- Classify twodimensional figures by properties of their lines and angles. CC.2.3.4.A.3

More information

Copying a Line Segment

Copying a Line Segment Copying a Line Segment Steps 1 4 below show you how to copy a line segment. Step 1 You are given line segment AB to copy. A B Step 2 Draw a line segment that is longer than line segment AB. Label one of

More information

6.00 Trigonometry Geometry/Circles Basics for the ACT. Name Period Date

6.00 Trigonometry Geometry/Circles Basics for the ACT. Name Period Date 6.00 Trigonometry Geometry/Circles Basics for the ACT Name Period Date Perimeter and Area of Triangles and Rectangles The perimeter is the continuous line forming the boundary of a closed geometric figure.

More information

0810ge. Geometry Regents Exam y # (x $ 3) 2 % 4 y # 2x $ 5 1) (0,%4) 2) (%4,0) 3) (%4,%3) and (0,5) 4) (%3,%4) and (5,0)

0810ge. Geometry Regents Exam y # (x $ 3) 2 % 4 y # 2x $ 5 1) (0,%4) 2) (%4,0) 3) (%4,%3) and (0,5) 4) (%3,%4) and (5,0) 0810ge 1 In the diagram below, ABC! XYZ. 3 In the diagram below, the vertices of DEF are the midpoints of the sides of equilateral triangle ABC, and the perimeter of ABC is 36 cm. Which two statements

More information

E G 2 3. MATH 1012 Section 8.1 Basic Geometric Terms Bland

E G 2 3. MATH 1012 Section 8.1 Basic Geometric Terms Bland MATH 1012 Section 8.1 Basic Geometric Terms Bland Point A point is a location in space. It has no length or width. A point is represented by a dot and is named by writing a capital letter next to the dot.

More information

MODELING AND DESIGN C H A P T E R F O U R

MODELING AND DESIGN C H A P T E R F O U R MODELING AND DESIGN C H A P T E R F O U R OBJECTIVES 1. Identify and specify basic geometric elements and primitive shapes. 2. Select a 2D profile that best describes the shape of an object. 3. Identify

More information

Droodle for Geometry Final Exam

Droodle for Geometry Final Exam Droodle for Geometry Final Exam Answer Key by David Pleacher Can you name this droodle? Back in 1953, Roger Price invented a minor art form called the Droodle, which he described as "a borkley-looking

More information

FINAL REVIEW. 1) Always, Sometimes, or Never. If you answer sometimes, give an example for when it is true and an example for when it is not true.

FINAL REVIEW. 1) Always, Sometimes, or Never. If you answer sometimes, give an example for when it is true and an example for when it is not true. FINL RVIW 1) lways, Sometimes, or Never. If you answer sometimes, give an eample for when it is true and an eample for when it is not true. a) rhombus is a square. b) square is a parallelogram. c) oth

More information

Downloaded from

Downloaded from Understanding Elementary Shapes 1 1.In the given figure, lines l and m are.. to each other. (A) perpendicular (B) parallel (C) intersect (D) None of them. 2.a) If a clock hand starts from 12 and stops

More information

Table of Contents. Constructions Day 1... Pages 1-5 HW: Page 6. Constructions Day 2... Pages 7-14 HW: Page 15

Table of Contents. Constructions Day 1... Pages 1-5 HW: Page 6. Constructions Day 2... Pages 7-14 HW: Page 15 CONSTRUCTIONS Table of Contents Constructions Day 1...... Pages 1-5 HW: Page 6 Constructions Day 2.... Pages 7-14 HW: Page 15 Constructions Day 3.... Pages 16-21 HW: Pages 22-24 Constructions Day 4....

More information

Geometry 1 FINAL REVIEW 2011

Geometry 1 FINAL REVIEW 2011 Geometry 1 FINL RVIW 2011 1) lways, Sometimes, or Never. If you answer sometimes, give an eample for when it is true and an eample for when it is not true. a) rhombus is a square. b) square is a parallelogram.

More information

CTB/McGraw-Hill. Math Quarter 2: Week 5: Mixed Review Test ID:

CTB/McGraw-Hill. Math Quarter 2: Week 5: Mixed Review Test ID: Page 1 of 35 Developed and published by CTB/McGraw-Hill LLC, a subsidiary of The McGraw-Hill Companies, Inc., 20 Ryan Ranch Road, Monterey, California 93940-5703. All rights reserved. Only authorized customers

More information

Unit 6 Lesson 1 Circle Geometry Properties Project

Unit 6 Lesson 1 Circle Geometry Properties Project Unit 6 Lesson 1 Circle Geometry Properties Project Name Part A Look up and define the following vocabulary words. Use an illustration where appropriate. Some of this vocabulary can be found in the glossary

More information

University of Houston High School Mathematics Contest Geometry Exam Spring 2016

University of Houston High School Mathematics Contest Geometry Exam Spring 2016 University of Houston High School Mathematics ontest Geometry Exam Spring 016 nswer the following. Note that diagrams may not be drawn to scale. 1. In the figure below, E, =, = 4 and E = 0. Find the length

More information

Geometry 2001 part 1

Geometry 2001 part 1 Geometry 2001 part 1 1. Point is the center of a circle with a radius of 20 inches. square is drawn with two vertices on the circle and a side containing. What is the area of the square in square inches?

More information

Geometric Constructions

Geometric Constructions Geometric onstructions (1) opying a segment (a) Using your compass, place the pointer at Point and extend it until reaches Point. Your compass now has the measure of. (b) Place your pointer at, and then

More information

Worksheet 10 Memorandum: Construction of Geometric Figures. Grade 9 Mathematics

Worksheet 10 Memorandum: Construction of Geometric Figures. Grade 9 Mathematics Worksheet 10 Memorandum: Construction of Geometric Figures Grade 9 Mathematics For each of the answers below, we give the steps to complete the task given. We ve used the following resources if you would

More information

Sec Geometry - Constructions

Sec Geometry - Constructions Sec 2.2 - Geometry - Constructions Name: 1. [COPY SEGMENT] Construct a segment with an endpoint of C and congruent to the segment AB. A B C **Using a ruler measure the two lengths to make sure they have

More information

Shelf, Treasure Chest, Tub. Math and Quiet!! Center, A. Quiet Dice for Make. (Talk! = Walk!) A. Warm Up or Lesson, CONTINUE ON!! B.

Shelf, Treasure Chest, Tub. Math and Quiet!! Center, A. Quiet Dice for Make. (Talk! = Walk!) A. Warm Up or Lesson, CONTINUE ON!! B. Sandra White - snannyw@aol.com - CAMT 2012 No Wasted Time 9 12 1 12 1 11 10 11 2 10 11 2 3 9 3 8 4 8 4 7 6 5 7 6 5 from Beginningto End Procedures Traveling / Waiting Unexpected Visitors Finishing Early

More information

Standard 4.G.1 4.G.2 5.G.3 5.G.4 4.MD.5

Standard 4.G.1 4.G.2 5.G.3 5.G.4 4.MD.5 Draw and identify lines and angles, as well as classify shapes by properties of their lines and angles (Standards 4.G.1 3). Standard 4.G.1 Draw points, lines, line segments, rays, angles (right, acute,

More information

June 2016 Regents GEOMETRY COMMON CORE

June 2016 Regents GEOMETRY COMMON CORE 1 A student has a rectangular postcard that he folds in half lengthwise. Next, he rotates it continuously about the folded edge. Which three-dimensional object below is generated by this rotation? 4) 2

More information

Standards of Learning Guided Practice Suggestions. For use with the Mathematics Tools Practice in TestNav TM 8

Standards of Learning Guided Practice Suggestions. For use with the Mathematics Tools Practice in TestNav TM 8 Standards of Learning Guided Practice Suggestions For use with the Mathematics Tools Practice in TestNav TM 8 Table of Contents Change Log... 2 Introduction to TestNav TM 8: MC/TEI Document... 3 Guided

More information

Name. Ms. Nong. Due on: Per: Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0

Name. Ms. Nong. Due on: Per: Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0 Name FRIDAY, FEBRUARY 24 Due on: Per: TH Geometry 2 nd semester Math packet # 2 Standards: 8.0 and 16.0 8.0 Students know, derive, and solve problems involving the perimeter, circumference, area, volume

More information

Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING

Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING Overview History of Engineering Graphics: Sketching, Tools,

More information

Class 5 Geometry O B A C. Answer the questions. For more such worksheets visit

Class 5 Geometry O B A C. Answer the questions. For more such worksheets visit ID : in-5-geometry [1] Class 5 Geometry For more such worksheets visit www.edugain.com Answer the questions (1) The set square is in the shape of. (2) Identify the semicircle that contains 'C'. A C O B

More information

Euclid s Muse MATERIALS VOCABULARY. area perimeter triangle quadrilateral rectangle line point plane. TIME: 40 minutes

Euclid s Muse MATERIALS VOCABULARY. area perimeter triangle quadrilateral rectangle line point plane. TIME: 40 minutes Euclid s Muse In this activity, participants match geometry terms to definitions and definitions to words. MATERIALS Transparency: Euclid s Muse Directions Transparency/Page: Euclid s Muse Transparency/Page:

More information

9.1 and 9.2 Introduction to Circles

9.1 and 9.2 Introduction to Circles Date: Secondary Math 2 Vocabulary 9.1 and 9.2 Introduction to Circles Define the following terms and identify them on the circle: Circle: The set of all points in a plane that are equidistant from a given

More information

Indicate whether the statement is true or false.

Indicate whether the statement is true or false. MATH 121 SPRING 2017 - PRACTICE FINAL EXAM Indicate whether the statement is true or false. 1. Given that point P is the midpoint of both and, it follows that. 2. If, then. 3. In a circle (or congruent

More information

Name No. Geometry 9-3 1) Complete the table: Name No. Geometry 9-1 1) Name a secant. Name a diameter. Name a tangent. Name No. Geometry 9-2 1) Find JK

Name No. Geometry 9-3 1) Complete the table: Name No. Geometry 9-1 1) Name a secant. Name a diameter. Name a tangent. Name No. Geometry 9-2 1) Find JK Geometry 9-1 1) Name a secant 1) Complete the table: Name a diameter Name a tangent Geometry 9-2 1) Find JK 2) Find the measure of 1 Geometry 9-2 2) 3) At 2:00 the hands of a clock form an angle of 2)

More information

KCATM Geometry

KCATM Geometry Name School KCATM Geometry 9 10 2013 1) Find the minimum perimeter of a rectangle whose area is 169 square meters. a) 42 meters b) 13 meters c) 26 meters d) 52 meters 2) Find the coordinates of the midpoint

More information

Tangents to Circles. The distance across the circle, through its center, is the diameter of the circle. The diameter is twice the radius.

Tangents to Circles. The distance across the circle, through its center, is the diameter of the circle. The diameter is twice the radius. ircles Tangents to ircles circle is the set of all points in a plane that are equidistant from a given point called the center of the circle. circle with center P is called circle P. The distance from

More information

18 Two-Dimensional Shapes

18 Two-Dimensional Shapes 18 Two-Dimensional Shapes CHAPTER Worksheet 1 Identify the shape. Classifying Polygons 1. I have 3 sides and 3 corners. 2. I have 6 sides and 6 corners. Each figure is made from two shapes. Name the shapes.

More information

UNIT 1 GEOMETRY. (revision from 1 st ESO) Unit 8 in our books

UNIT 1 GEOMETRY. (revision from 1 st ESO) Unit 8 in our books UNIT 1 GEOMETRY (revision from 1 st ESO) Unit 8 in our books WHAT'S GEOMETRY? Geometry is the study of the size, shape and position of 2 dimensional shapes and 3 dimensional figures. In geometry, one explores

More information

3 Kevin s work for deriving the equation of a circle is shown below.

3 Kevin s work for deriving the equation of a circle is shown below. June 2016 1. A student has a rectangular postcard that he folds in half lengthwise. Next, he rotates it continuously about the folded edge. Which three-dimensional object below is generated by this rotation?

More information

3. Given the similarity transformation shown below; identify the composition:

3. Given the similarity transformation shown below; identify the composition: Midterm Multiple Choice Practice 1. Based on the construction below, which statement must be true? 1 1) m ABD m CBD 2 2) m ABD m CBD 3) m ABD m ABC 1 4) m CBD m ABD 2 2. Line segment AB is shown in the

More information

ENGINEERING GRAPHICS

ENGINEERING GRAPHICS ENGINEERING GRAPHICS Course Structure Units Topics Marks Unit I Plane Geometry 16 1 Lines, angles and rectilinear figures 2 Circles and tangents 3 Special curves: ellipse, parabola, involute, cycloid.

More information

CHAPTER 10 PROPERTIES OF CIRCLES

CHAPTER 10 PROPERTIES OF CIRCLES HT 0 OTIS OF ILS In this chapter we address ig IS: ) Using properties of segments that intersect circles ) pplying angle relationships in circles 3) Using circles in the coordinate plane Section: ssential

More information

EVALUATE- work out CALCULATE work out EXPRESS show PRODUCT- multiply SUM/TOTAL- add SIMPLIFY make easier

EVALUATE- work out CALCULATE work out EXPRESS show PRODUCT- multiply SUM/TOTAL- add SIMPLIFY make easier EVALUATE- work out CALCULATE work out EXPRESS show PRODUCT- multiply SUM/TOTAL- add SIMPLIFY make easier A number with only 2 factors- 1 and itself 2 3 5 7 11 13 17 19 23 29 31 37 41 (Note 1 is not a prime

More information

Project Maths Geometry Notes

Project Maths Geometry Notes The areas that you need to study are: Project Maths Geometry Notes (i) Geometry Terms: (ii) Theorems: (iii) Constructions: (iv) Enlargements: Axiom, theorem, proof, corollary, converse, implies The exam

More information

Constructions. Unit 9 Lesson 7

Constructions. Unit 9 Lesson 7 Constructions Unit 9 Lesson 7 CONSTRUCTIONS Students will be able to: Understand the meanings of Constructions Key Vocabulary: Constructions Tools of Constructions Basic geometric constructions CONSTRUCTIONS

More information

FSA Geometry EOC Getting ready for. Circles, Geometric Measurement, and Geometric Properties with Equations.

FSA Geometry EOC Getting ready for. Circles, Geometric Measurement, and Geometric Properties with Equations. Getting ready for. FSA Geometry EOC Circles, Geometric Measurement, and Geometric Properties with Equations 2014-2015 Teacher Packet Shared by Miami-Dade Schools Shared by Miami-Dade Schools MAFS.912.G-C.1.1

More information

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 3: Constructing Polygons Instruction

UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 3: Constructing Polygons Instruction rerequisite Skills This lesson requires the use of the following skills: using a compass copying and bisecting line segments constructing perpendicular lines constructing circles of a given radius Introduction

More information

UNIT PLAN. Grade Level: Unit #: 7 Unit Name: Circles

UNIT PLAN. Grade Level: Unit #: 7 Unit Name: Circles UNIT PLAN Subject: Geometry Grade Level: 10-12 Unit #: 7 Unit Name: Circles Big Idea/Theme: The understanding of properties of circles, the lines that intersect them, and the use of their special segments

More information

Activity 5.2 Making Sketches in CAD

Activity 5.2 Making Sketches in CAD Activity 5.2 Making Sketches in CAD Introduction It would be great if computer systems were advanced enough to take a mental image of an object, such as the thought of a sports car, and instantly generate

More information

Step 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points.

Step 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points. Student Name: Teacher: Date: District: Miami-Dade County Public Schools Test: 9_12 Mathematics Geometry Exam 1 Description: GEO Topic 1 Test: Tools of Geometry Form: 201 1. A student followed the given

More information

(1) Page 482 #1 20. (2) Page 488 #1 14. (3) Page # (4) Page 495 #1 10. (5) Page #12 30,

(1) Page 482 #1 20. (2) Page 488 #1 14. (3) Page # (4) Page 495 #1 10. (5) Page #12 30, Geometry/Trigonometry Unit 8: Circles Notes Name: Date: Period: # (1) Page 482 #1 20 (2) Page 488 #1 14 (3) Page 488 489 #15 26 (4) Page 495 #1 10 (5) Page 495 496 #12 30, 37 39 (6) Page 502 #1 7 (7) Page

More information

Class : VI - Mathematics

Class : VI - Mathematics O. P. JINDAL SCHOOL, RAIGARH (CG) 496 001 Phone : 07762-227042, 227293, (Extn. 227001-49801, 02, 04, 06); Fax : 07762-262613; e-mail: opjsraigarh@jspl.com; website : www.opjsrgh.in Class : VI - Mathematics

More information

TEST NAME: Geometry TEST ID: GRADE:07 SUBJECT:Mathematics TEST CATEGORY: School Assessment

TEST NAME: Geometry TEST ID: GRADE:07 SUBJECT:Mathematics TEST CATEGORY: School Assessment TEST NAME: Geometry TEST ID: 489169 GRADE:07 SUBJECT:Mathematics TEST CATEGORY: School Assessment Geometry Page 1 of 17 Student: Class: Date: 1. Mr. Koger asked the students in his class to construct a

More information

DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET

DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET This booklet is an optional revision aid for the Summer Exam Name: Maths Teacher: Revision List for Summer Exam Topic Junior Maths Bk 3 Place Value Chapter

More information

Geometry Mrs. Crocker Spring 2014 Final Exam Review

Geometry Mrs. Crocker Spring 2014 Final Exam Review Name: Mod: Geometry Mrs. Crocker Spring 2014 Final Exam Review Use this exam review to complete your flip book and to study for your upcoming exam. You must bring with you to the exam: 1. Pencil, eraser,

More information

RightStart Mathematics

RightStart Mathematics Most recent update: Decdember 28, 2017 RightStart Mathematics Corrections and Updates for Level E/Grade 4 Lessons and Worksheets, second edition LESSON / WORKSHEET Lesson 38 Classroom version only CHANGE

More information

RightStart Mathematics

RightStart Mathematics Most recent update: April 18, 2018 RightStart Mathematics Corrections and Updates for Level E/Grade 4 Lessons and Worksheets, second edition LESSON / WORKSHEET CHANGE DATE Lesson 8 04/18/2018 Lesson 36

More information

CHARACTERISTICS AND CLASSIFICATION OF SHAPES and 1.3.2

CHARACTERISTICS AND CLASSIFICATION OF SHAPES and 1.3.2 CHARACTERISTICS AND CLASSIFICATION OF SHAPES 1.3.1 and 1.3.2 Geometric shapes occur in many places. After studying them using transformations, students start to see certain characteristics of different

More information

Circles Assignment Answer the following questions.

Circles Assignment Answer the following questions. Answer the following questions. 1. Define constructions. 2. What are the basic tools that are used to draw geometric constructions? 3. What is the use of constructions? 4. What is Compass? 5. What is Straight

More information

Mathematical Construction

Mathematical Construction Mathematical Construction Full illustrated instructions for the two bisectors: Perpendicular bisector Angle bisector Full illustrated instructions for the three triangles: ASA SAS SSS Note: These documents

More information

h r c On the ACT, remember that diagrams are usually drawn to scale, so you can always eyeball to determine measurements if you get stuck.

h r c On the ACT, remember that diagrams are usually drawn to scale, so you can always eyeball to determine measurements if you get stuck. ACT Plane Geometry Review Let s first take a look at the common formulas you need for the ACT. Then we ll review the rules for the tested shapes. There are also some practice problems at the end of this

More information

9-1: Circle Basics GEOMETRY UNIT 9. And. 9-2: Tangent Properties

9-1: Circle Basics GEOMETRY UNIT 9. And. 9-2: Tangent Properties 9-1: Circle Basics GEOMETRY UNIT 9 And 9-2: Tangent Properties CIRCLES Content Objective: Students will be able to solve for missing lengths in circles. Language Objective: Students will be able to identify

More information

APPLIED GEOMETRY COORDINATE SYSTEM LINE CONSTRUCTION LINE CONSTRUCTION BISECTING LINE OR ARC LINE CONSTRUCTION

APPLIED GEOMETRY COORDINATE SYSTEM LINE CONSTRUCTION LINE CONSTRUCTION BISECTING LINE OR ARC LINE CONSTRUCTION OORDINTE SSTEM PPLIED GEOMETR ( LINE, NGLE, POLGON, R, IRLE, ND UTILITIES) LINE ONSTRUTION 10. 9. 8. 7. 6. 5. 4. 3. 2. Z 1. 0. 0. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. :: 2 steps are used to create one line.

More information

Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb ENGINEERING DRAWING (EEE)

Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb ENGINEERING DRAWING (EEE) Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb. - 2015 ENGINEERING DRAWING Time: 3 hours (EEE) Question Paper Consists of Part-A and Part-B Answering the question in Part-A

More information

Objective: Use a compass and straight edge to construct congruent segments and angles.

Objective: Use a compass and straight edge to construct congruent segments and angles. CONSTRUCTIONS Objective: Use a compass and straight edge to construct congruent segments and angles. Introduction to Constructions Constructions: The drawing of various shapes using only a pair of compasses

More information

Chapter 11: Constructions and Loci

Chapter 11: Constructions and Loci Chapter 11: Section 11.1a Constructing a Triangle given 3 sides (sss) Leave enough room above the line to complete the shape. Do not rub out your construction lines. They show your method. 1 Section 11.1b

More information

Course: Math Grade: 7. Unit Plan: Geometry. Length of Unit:

Course: Math Grade: 7. Unit Plan: Geometry. Length of Unit: Course: Math Grade: 7 Unit Plan: Geometry Length of Unit: Enduring Understanding(s): Geometry is found in the visual world in two and three dimension. We use geometry daily in problem solving. Essential

More information

Objective: Use a compass and straight edge to construct congruent segments and angles.

Objective: Use a compass and straight edge to construct congruent segments and angles. CONSTRUCTIONS Objective: Use a compass and straight edge to construct congruent segments and angles. Oct 1 8:33 AM Oct 2 7:42 AM 1 Introduction to Constructions Constructions: The drawing of various shapes

More information

16. DOK 1, I will succeed." In this conditional statement, the underlined portion is

16. DOK 1, I will succeed. In this conditional statement, the underlined portion is Geometry Semester 1 REVIEW 1. DOK 1 The point that divides a line segment into two congruent segments. 2. DOK 1 lines have the same slope. 3. DOK 1 If you have two parallel lines and a transversal, then

More information

0809ge. Geometry Regents Exam Based on the diagram below, which statement is true?

0809ge. Geometry Regents Exam Based on the diagram below, which statement is true? 0809ge 1 Based on the diagram below, which statement is true? 3 In the diagram of ABC below, AB # AC. The measure of!b is 40. 1) a! b 2) a! c 3) b! c 4) d! e What is the measure of!a? 1) 40 2) 50 3) 70

More information

Developing geometric thinking. A developmental series of classroom activities for Gr. 1-9

Developing geometric thinking. A developmental series of classroom activities for Gr. 1-9 Developing geometric thinking A developmental series of classroom activities for Gr. 1-9 Developing geometric thinking ii Contents Van Hiele: Developing Geometric Thinking... 1 Sorting objects using Geostacks...

More information

Grade 6 Middle School Mathematics Contest A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot?

Grade 6 Middle School Mathematics Contest A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot? Grade 6 Middle School Mathematics Contest 2004 1 1. A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot? a. 6 b. 8 c. 16 d. 48 e. 56 2. How many different prime

More information

The Magic Circle Basic Lesson. Developed by The Alexandria Seaport Foundation

The Magic Circle Basic Lesson. Developed by The Alexandria Seaport Foundation The Magic Circle Basic Lesson Developed by The Alexandria Seaport Foundation The Tools Needed Compass Straightedge Pencil Paper (not graph paper, 8.5 x 11 is fine) Your Brain (the most important tool!)

More information

Measuring and Drawing Angles and Triangles

Measuring and Drawing Angles and Triangles NME DTE Measuring and Drawing ngles and Triangles Measuring an angle 30 arm origin base line 0 180 0 If the arms are too short to reach the protractor scale, lengthen them. Step 1: lace the origin of the

More information

Date: Period: Quadrilateral Word Problems: Review Sheet

Date: Period: Quadrilateral Word Problems: Review Sheet Name: Quadrilateral Word Problems: Review Sheet Date: Period: Geometry Honors Directions: Please answer the following on a separate sheet of paper. Completing this review sheet will help you to do well

More information

2. Here are some triangles. (a) Write down the letter of the triangle that is. right-angled, ... (ii) isosceles. ... (2)

2. Here are some triangles. (a) Write down the letter of the triangle that is. right-angled, ... (ii) isosceles. ... (2) Topic 8 Shapes 2. Here are some triangles. A B C D F E G (a) Write down the letter of the triangle that is (i) right-angled,... (ii) isosceles.... (2) Two of the triangles are congruent. (b) Write down

More information

Mathematics 43601F. Geometry. In the style of General Certificate of Secondary Education Foundation Tier. Past Paper Questions by Topic TOTAL

Mathematics 43601F. Geometry. In the style of General Certificate of Secondary Education Foundation Tier. Past Paper Questions by Topic TOTAL Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials In the style of General Certificate of Secondary Education Foundation Tier Pages 2 3 4 5 Mark

More information

The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY. Wednesday, January 29, :15 a.m. to 12:15 p.m.

The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY. Wednesday, January 29, :15 a.m. to 12:15 p.m. GEOMETRY The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY Wednesday, January 29, 2014 9:15 a.m. to 12:15 p.m., only Student Name: School Name: The possession or use of any

More information

Solutions to Exercise problems

Solutions to Exercise problems Brief Overview on Projections of Planes: Solutions to Exercise problems By now, all of us must be aware that a plane is any D figure having an enclosed surface area. In our subject point of view, any closed

More information

Geometry. Teacher s Guide

Geometry. Teacher s Guide Geometry Teacher s Guide WALCH PUBLISHING Table of Contents To the Teacher.......................................................... vi Classroom Management..................................................

More information

6th FGCU Invitationdl Math Competition

6th FGCU Invitationdl Math Competition 6th FGCU nvitationdl Math Competition Geometry ndividual Test Option (E) for all questions is "None of the above." 1. MC = 12, NC = 6, ABCD is a square. 'h What is the shaded area? Ans ~ (A) 8 (C) 25 2.

More information

Chapter 9 Practice Test 1 due 4/13 Wed Measurement and Geometry

Chapter 9 Practice Test 1 due 4/13 Wed Measurement and Geometry Name Date Class Chapter 9 Practice Test 1 due 4/13 Wed Measurement and Geometry Choose the best answer. 1. Bob is drawing the outside lines on a sports field that is 72 feet by 90 feet. What is the total

More information

(A) Circle (B) Polygon (C) Line segment (D) None of them (A) (B) (C) (D) (A) Understanding Quadrilaterals <1M>

(A) Circle (B) Polygon (C) Line segment (D) None of them (A) (B) (C) (D) (A) Understanding Quadrilaterals <1M> Understanding Quadrilaterals 1.A simple closed curve made up of only line segments is called a (A) Circle (B) Polygon (C) Line segment (D) None of them 2.In the following figure, which of the polygon

More information

Geometry SOL G.4 Constructions Name Date Block. Constructions

Geometry SOL G.4 Constructions Name Date Block. Constructions Geometry SOL G.4 Constructions Mrs. Grieser Name Date Block Constructions Grab your compass and straight edge - it s time to learn about constructions!! On the following pages you will find instructions

More information

3 rd -5 th Grade. Mix-Freeze-Group. Geometry

3 rd -5 th Grade. Mix-Freeze-Group. Geometry 3 rd -5 th Grade Mix-Freeze-Group Geometry Mix-Freeze-Group Purpose: This game gives students an opportunity to develop and use 3-5 th grade geometry based math vocabulary, How To Play (whole group or

More information

Design Your Own Dream Home! Michael Daniels Olive Grove Charter School Grade Levels: 9-12 Subject: Mathematics

Design Your Own Dream Home! Michael Daniels Olive Grove Charter School Grade Levels: 9-12 Subject: Mathematics Design Your Own Dream Home! Michael Daniels Olive Grove Charter School Grade Levels: 9-12 Subject: Mathematics Project Summary: Using Free CAD, a computer aided drafting software program, students design

More information

The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY. Thursday, August 17, :30 to 3:30 p.m.

The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY. Thursday, August 17, :30 to 3:30 p.m. GEOMETRY The University of the State of New York REGENTS HIGH SCHOOL EXAMINATION GEOMETRY Thursday, August 17, 2017 12:30 to 3:30 p.m., only Student Name: School Name: The possession or use of any communications

More information

(A) Circle (B) Polygon (C) Line segment (D) None of them

(A) Circle (B) Polygon (C) Line segment (D) None of them Understanding Quadrilaterals 1.The angle between the altitudes of a parallelogram, through the same vertex of an obtuse angle of the parallelogram is 60 degree. Find the angles of the parallelogram.

More information

UNIT 3 CIRCLES AND VOLUME Lesson 3: Constructing Tangent Lines Instruction

UNIT 3 CIRCLES AND VOLUME Lesson 3: Constructing Tangent Lines Instruction Prerequisite Skills This lesson requires the use of the following skills: understanding the relationship between perpendicular lines using a compass and a straightedge constructing a perpendicular bisector

More information

TECHNICAL DRAWING APPLICATIONS (65)

TECHNICAL DRAWING APPLICATIONS (65) TECHNICAL DRAWING APPLICATIONS (65) Aims: 1. To develop competence among the students to pursue technical courses like Engineering, Architecture, Draftsmanship Surveying and other professional courses.

More information

Construction Junction, What s your Function?

Construction Junction, What s your Function? Construction Junction, What s your Function? Brian Shay Teacher and Department Chair Canyon Crest Academy Brian.Shay@sduhsd.net @MrBrianShay Session Goals Familiarize ourselves with CCSS and the GSE Geometry

More information

STRAND H: Angle Geometry

STRAND H: Angle Geometry Mathematics SKE, Strand H UNIT H3 onstructions and Loci: Text STRND H: ngle Geometry H3 onstructions and Loci Text ontents Section H3.1 Drawing and Symmetry H3.2 onstructing Triangles and ther Shapes H3.3

More information

Answer Keys for Calvert Math

Answer Keys for Calvert Math nswer Keys for Calvert Math Lessons 1 40 101 120 0613-0615 CONTENTS Math Textbook...63 Math Workbook...69 Math Lesson Manual...72 nswer Keys Math Textbook Lessons 101 120 8.1 Geometry asics Chapter 8

More information

The Texas Education Agency and the Texas Higher Education Coordinating Board Geometry Module Pre-/Post-Test. U x T'

The Texas Education Agency and the Texas Higher Education Coordinating Board Geometry Module Pre-/Post-Test. U x T' Pre-/Post-Test The Texas Education Agency and the Texas Higher Education Coordinating Board Geometry Module Pre-/Post-Test 1. Triangle STU is rotated 180 clockwise to form image STU ' ' '. Determine the

More information

ENGINEERING DRAWING

ENGINEERING DRAWING Subject Code: R13109/R13 Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb. - 2015 ENGINEERING DRAWING (Common to ECE, EIE, Bio-Tech, EComE, Agri.E) Time: 3 hours Max. Marks:

More information

S. Stirling Page 1 of 14

S. Stirling Page 1 of 14 3.1 Duplicating Segments and ngles [and riangles] hese notes replace pages 144 146 in the book. You can read these pages for extra clarifications. Instructions for making geometric figures: You can sketch

More information