TABLE OF CONTENTS. Chapter 1: Drawing In AutoCAD
|
|
- Bernice Gibbs
- 5 years ago
- Views:
Transcription
1
2 TABLE OF CONTENTS Chapter 1: Drawing In AutoCAD 1.1) Introduction ) AutoCAD s User Interface ) The Drawing Area ) Accessing AutoCAD Commands ) Standard Toolbar ) Customize User Interface (CUI) ) User Interface and Startup Tutorial ) Coordinates ) WCS/UCS Coordinate Systems Tutorial ) Drawing using Coordinates Tutorial ) Printing ) Printing Tutorial ) Draw Commands ) Text ) Modify Commands ) Object Snap Commands ) Wagon Tutorial ) Selecting Objects ) Object Selection Tutorial ) Object Snap Tutorial ) Polar Tracking ) Object Snap Tracking ) Tracking Tutorial ) Dynamic Input ) Dynamic Input Tutorial ) Grip Boxes ) Grip Box Tutorial Crossword puzzle Problems i
3 Chapter 2: Orthographic Projection 2.1) Introduction to Engineering Graphics ) Orthographic Projection Introduction ) The Glass Box Method ) The Standard Views ) Line Types Used in an Orthographic Projection ) Rules for Line Creation and Use ) Creating an Orthographic Projection 2-16 * 2.8) Auxiliary Views 2-30 Crossword puzzle 2-35 Problems 2-37 Chapter 3: Creating Orthographic Projections in AutoCAD 3.1) Introduction ) Layers ) Line Type Scale ) Properties ) Printing using Pen Widths ) Creating Layers Tutorial ) Title Blocks ) Blocking ) Title Block Tutorial ) Model and Layout Space ) Orthographic Projection Tutorial 3-33 * 3.12) Auxiliary View Tutorial 3-50 Crossword puzzle 3-55 Problems 3-57 Chapter 4: Dimensioning 4.1) Detailed Drawings ) Learning to Dimension ) Dimension Appearance and Techniques ) Dimensioning and Locating Simple Features 4-13 * 4.5) Dimensioning and Locating Advanced Features ) Dimension Choice 4-26 Crossword puzzle 4-43 Problems 4-47 * = Advanced topics ii
4 Chapter 5: Dimensioning in AutoCAD Chapter 6: Sectioning 5.1) Introduction ) Dimension Commands ) Dimension Styles ) Dimension Variables ) The DIM Prompt ) Associative Dimensions ) Annotative Objects ) Dimensioning Tutorial ) Editing Dimensions Tutorial 5-32 Crossword puzzle 5-37 Problems ) Sectional Views ) Basic Sections 6-5 * 6.2) Advanced Sections 6-7 Crossword puzzle 6-19 Problems 6-21 Chapter 7: Creating Section Views in AutoCAD 7.1) Introduction ) Cutting Plane Lines ) Hatches ) Creating Hatches Tutorial ) Half Section Tutorial 7-9 Crossword puzzle 7-15 Problems 7-17 Chapter 8: Tolerancing * = Advanced topics * 8.1) Tolerancing and Interchangeability 8-1 * 8.2) Tolerancing Standards 8-1 * 8.3) Tolerance Types 8-2 * 8.4) General Definitions 8-3 * 8.5) Inch Tolerances 8-4 * 8.6) Metric Tolerances 8-15 * 8.7) Selecting Tolerances 8-19 * 8.8) Tolerance Accumulation 8-20 * 8.9) Formatting Tolerances 8-24 Crossword puzzle 8-27 Problems 8-31 iii
5 Chapter 9: Tolerancing in AutoCAD * 9.1) Introduction 9-1 * 9.2) Tolerance Parameters 9-1 * 9.3) Tolerancing Tutorial 9-3 Crossword puzzle 9-7 Problems 9-9 Chapter 10: Threads and Fasteners * 10.1) Fasteners 10-1 * 10.2) Screw Thread Definitions 10-1 * 10.3) Types of Thread 10-4 * 10.4) Manufacturing Screw Threads 10-4 * 10.5) Drawing Screw Threads 10-5 * 10.6) Unified Threads * 10.7) Metric Threads * 10.8) Drawing Bolts * 10.9) Bolt and Screw Clearances Crossword puzzle Problems Chapter 11: Drawing Threads in AutoCAD * 11.1) Introduction 11-1 * 11.2) External Threads Tutorial 11-2 * 11.3) Internal Threads Tutorial 11-4 * 11.4) Hex Nuts and Bolts Tutorial 11-7 Problems Chapter 12: Assembly Drawings 12.1) Definitions ) Views Used in Assembly Drawings ) Things to Include/Not Include ) Standard Parts 12-6 Crossword puzzle Problems Chapter 13: Creating Assembly Drawings in AutoCAD * = Advanced topics 13.1) Introduction ) Assembly Tutorial 13-2 Problems iv
6 Chapter 14: Pictorial Drawings * 14.1) Pictorials Introduction 14-1 * 14.2) Isometric Pictorial Axes 14-3 * 14.3) Drawing Linear Features 14-4 * 14.4) Drawing Circles and Radii 14-7 * 14.5) Drawing Cylinders 14-9 * 14.6) Oblique Pictorial Overview Crossword puzzle Problems Chapter 15: Creating Isometric Pictorials in AutoCAD * 15.1) Isometric Snap 15-1 * 15.2) Isocircles 15-2 * 15.3) Isometric Pictorial Tutorial 15-3 * 15.4) Isocircle Tutorial 15-7 Crossword puzzle Problems Appendix A: Limits and Fits A.1) Limits and Fits (Inch) A - 1 A.2) Metric Limits and Fits A - 8 Appendix B: Threads and Fastener Tables B.1) Unified National Thread Form B - 1 B.2) Metric Thread Form B - 2 B.3) Fasteners (Inch Series) B - 3 B.4) Metric Fasteners B - 11 B.5) Bolt and Screw Clearance Holes B - 17 Appendix C: References C - 1 * = Advanced topics v
7 LIST OF EXERCISES Chapter 1: Drawing in AutoCAD Exercise 1-1: User interface and startup 1-29 Exercise 1-2: Relative coordinates Exercise 1-3: Scale 1-52 Exercise 1-4: Relative coordinates Exercise 1-5: Text style 1-97 Exercise 1-6: Object snaps Exercise 1-7: Tracking Chapter 2: Orthographic Projection Exercise 2-1: Principle views 2-5 Exercise 2-2: Line types 2-8 Exercise 2-3: Line use in an orthographic projection 2-9 Exercise 2-4: Missing lines Exercise 2-5: Missing lines Exercise 2-6 (Video): Beginning Orthographic Projection 2-23 Exercise 2-7 (Video): Intermediate Orthographic Projection 2-24 Exercise 2-8: Drawing an orthographic projection Exercise 2-9: Drawing an orthographic projection Exercise 2-10 (Video): Advanced Orthographic Projection 2-29 Exercise 2-11 (Video): Auxiliary Views 2-31 Exercise 2-12: Auxiliary view 2-33 Chapter 3: Creating Orthographic Projections in AutoCAD Exercise 3-1: Creating layers 3-16 Exercise 3-2: Portrait title block 3-30 Chapter 4: Dimensioning Exercise 4-1: Dimension types 4-5 Exercise 4-2: Spacing and readability Exercise 4-3: Spacing and readability Exercise 4-4: Duplicate dimensions 4-10 Exercise 4-5: Dimension placement 4-11 Exercise 4-6: Circular and rectangular views 4-14 Exercise 4-7: Dimensioning and locating features 4-17 Exercise 4-8: Advanced features 4-24 Exercise 4-9: Dimension accuracy 4-30 Exercise 4-10: Rounding off 4-31 Exercise 4-11: Dimension choice 4-33 Exercise 4-12 (Video): Beginning Dimensioning 4-34 vi
8 Exercise 4-13 (Video): Intermediate Dimensioning 4-35 Exercise 4-14: Dimensioning Exercise 4-15: Dimensioning Exercise 4-16: Dimensioning Exercise 4-17: Dimensioning Exercise 4-18 (Video): Advanced Dimensioning Exercise 4-19 (Video): Advanced Dimensioning Chapter 5: Dimensioning in AutoCAD Chapter 6: Sectioning Exercise 5-1: Dimension styles 5-31 Exercise 6-1 (Video): Full Section 6-12 Exercise 6-2: Full section 6-13 Exercise 6-3 (Video): Half Section 6-14 Exercise 6-4: Half section 6-15 Exercise 6-5: Offset section 6-16 Exercise 6-6 (Video): Aligned Section 6-17 Exercise 6-7: Aligned section 6-18 Chapter 8: Tolerancing Exercise 8-1: General definitions 8-4 Exercise 8-2: Inch tolerance definitions 8-6 Exercise 8-3: Types of fits 8-7 Exercise 8-4: Determining fit type 8-7 Exercise 8-5: Limits and fits 8-10 Exercise 8-6: Milling Jack assembly tolerances 8-11 Exercise 8-7: Millimeter tolerance definitions 8-16 Exercise 8-8: Metric fit designation 8-18 Exercise 8-9: Systems 8-18 Exercise 8-10: Metric limits and fits 8-19 Exercise 8-11: Tolerance accumulation 8-21 Exercise 8-12: Over dimensioning 8-23 Chapter 9: Tolerancing in AutoCAD Exercise 9-1: Tolerancing 9-6 vii
9 Chapter 10: Threads and Fasteners Exercise 10-1: Screw thread features 10-3 Exercise 10-2: Unified National thread note components Exercise 10-3: Unified National thread note Exercise 10-4: Metric thread note components Exercise 10-5: Metric thread tables Exercise 10-6: Fastener tables and clearance holes Chapter 12: Assembly Drawings Exercise 12-1: Section lines in assemblies 12-5 Exercise 12-2: Working drawing package 12-7 Chapter 14: Pictorial Drawings Exercise 14-1 (Video): Beginning Isometric Pictorial Exercise 14-2: Creating an isometric pictorial Exercise 14-3 (Video): Beginning Isometric Pictorial Exercise 14-4: Creating an isometric pictorial Exercise 14-5 (Video): Intermediate Isometric Pictorial viii
ENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationContents. Foreword. Using this Guide
Foreword xv Preface xvii Scope Using this Guide xix xix 1 Specifying technical products 1 1.1 What is meant by technical product specification? 1 1.2 Design brief 1 1.3 Function 1 1.4 Specifications 2
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationDrawing and Detailing
Drawing and Detailing with SolidWorks 2007 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development
More informationDrawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationADA Curriculum for Pre-Engineering Students Correlation Guide
ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationAutoCAD LT 2010 Tutorial
AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table
More informationPictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor
DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor Pictorial Drawings Geisecke s textbook for reference: 14 th Ed. Ch. 15: p. 601 Ch. 16: p. 620 15 th Ed. Ch. 14: p. 518 Ch. 15: p. 552 Update:
More informationChapter 2: Dimensioning Basic Topics Advanced Topics Exercises
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationCourse Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 Major Concepts to be learned:
Course Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 1. Sketching skills 2. Orthographic projection 3. Visualization of views 4. Location of lines
More informationIsometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
More informationParametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC
Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of
More informationCLOTHING REQUIREMENT SkillsUSA-VICA Blazer, sweater, or windbreaker and accompanying official dress. Or appropriate professional/business attire.
BOARD DRAFTING - MECHANICAL PURPOSE To evaluate each contestant's preparation for employment and to recognize outstanding students for excellence and professionalism in the field of machine drafting. First,
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationIsometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
More informationManufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
More information6.1 INTRODUCTION Chapter 6 ORTHOGRAPHIC PROJECTIONS OF SIMPLE MACHINE BLOCKS We have already made you aware of many simple geometrical shapes (laminae), projected on such planes (vertical plane, horizontal
More informationDFTG-1305 Technical Drafting Prof. Francis Ha
DFTG-1305 Technical Drafting Prof. Francis Ha Session 5 Dimensioning Geisecke s textbook: 14 th Ed. Chapter 10 p. 362 15 th Ed. Chapter 11 p. 502 Update: 17-0508 Dimensioning Part 1 of 2 Dimensioning Summary
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationCreate Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models
GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) Introduction to Blueprint Reading for Welders
COASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) WLDG 1313: Introduction to Blueprint Reading for Welders Semester Hours: 3 Textbooks: Blueprint Reading For Welders, by A.E. Bennett & Louis J. Siy,
More informationLas Vegas, Nevada November 27-30, 2001
Las Vegas, Nevada November 27-30, 2001 Speaker Name: Phil Leverault Course Title: Conquering Dimensions Course ID: Course Outline: Factors to Consider for Dimension Styles Discipline Mechanical Dimensioning
More informationStudy Guide. AutoCAD Applications for Engineering Technology
Study Guide AutoCAD Applications for Engineering Technology All terms mentioned in this text that are known to be trademarks or service marks have been appropriately capitalized. Use of a term in this
More informationParametric Modeling with Creo Parametric 2.0
Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationCADD I. A1 A2. I can recall from my notebook all course content and grading procedure. A3. I can list 3 ways Cadd impacts industry. B.
St. Michael Albertville High School Teacher: Scott Danielson CADD I September 2016 CADD 1 Content Skills Learning Targets Standards Assessment Resources & Technology CEQ: WHAT AND HOW IS COMPUTER AIDED
More informationFirst Level 2D Fundamentals
AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationTechnical drawings and their interpreta1on. ME Fall 2011 Eradat SJSU Based on notes on Jim Burge and other online resources
Technical drawings and their interpreta1on ME 297-1 Fall 2011 Eradat SJSU Based on notes on Jim Burge and other online resources Technical drawings Technical drawings Orthographic projec1on Isometric layout
More informationIntermediate Drafting Design
Intermediate Drafting Design Unit: 1 Content Standard(s) and Section Views 1. Demonstrate the proper use of sectional view concepts to create a full section, half section, broken-out section, offset section,
More informationAutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric
More informationApplications in Technical Drawing
Applications in Technical Drawing Objectives: To use drawing aids in orthographic projection. To recognise the use of construction line in orthographic projection. To locate points using OSNAP and OTRACK.
More informationAutoCAD 2014 Tutorial - First Level: 2D Fundamentals
AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationENGINEERING GRAPHICS ESSENTIALS. (A Text and Lecture Aid) Second Edition. Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS
ENGINEERING GRAPHICS ESSENTIALS (A Text and Lecture Aid) Second Edition Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
More informationHonors Drawing/Design for Production (DDP)
Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationTools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih
Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationAssignment 12 CAD Mechanical Part 2
Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More informationChapter 7 Isometric Drawings
Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More information11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings
CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the
More informationCopyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material
Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.
More informationMaking an Architectural Drawing Template
C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Chapter 17 Exercise 1 1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop. 3. Use the two layers 0 and Cyan. 4. Set the
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More information8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
More informationLaboratory Exercises
Laboratory Exercises 4 : 1 Lab 1A Inverted T Inverted T. Draw the solid object shown. Place the origin at the intersection of the faces with the holes in them. The front face is marked for you. Make sure
More informationENGINEERING GRAPHICS 1E9
Lecture 3 Monday, 15 December 2014 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections Lecture 3 Monday, 15 December 2014 2 What is ISOMETRIC? It is a method of producing pictorial view of an object
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationGEN20604 Intelligent AutoCAD Model Documentation Made Easy
GEN20604 Intelligent AutoCAD Model Documentation Made Easy David Cohn 4D Technologies Learning Objectives Learn how to create base views and projected views from 3D models Learn how to create and control
More informationTest Answers and Exam Booklet. Geometric Tolerancing
Test Answers and Exam Booklet Geometric Tolerancing iii Contents ANSWERS TO THE GEOMETRIC TOLERANCING TEST............. 1 Part 1. Questions Part 2. Calculations SAMPLE ANSWERS TO THE GEOMETRIC TOLERANCING
More informationTeach Yourself UG NX Step-by-Step
Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More informationENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION
IM SYLLABUS (2014) ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION SYLLABUS Engineering Drawing and Graphical Communication IM 09 (Available in September) Syllabus 1 Paper (3 hours) Aims The aims
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationDescribing an Angle Bracket
Basics of Drafting Describing an Angle Bracket Orthographic Projection Orthographic drawings represent three dimensional objects in three separate views arranged in a standard manner. Orthographic Views
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationGlass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2
2D Drawings Glass Box Projection Gives you 6 sides to view of an object. 10/2/14 2 We can simplify this for some objects to 3 views Glass Box Approach Glass Box Approach Glass Box Approach Glass Box Approach
More informationInterpretation of Drawings. An Introduction to the Basic Concepts of Creating Technical Drawings
Interpretation of Drawings An Introduction to the Basic Concepts of Creating Technical Drawings Introduction In the design process drawings are the main way in which information about an object or product
More informationIntroduction to Engineering Design
Introduction to Engineering Design Final Examination Spring 2005 Answer Key Parts A, B & C For Teacher Use ONLY Part A Scoring Conversion Chart Raw Converted Raw Converted Raw Converted Raw Converted 1
More informationIsometric Circles and Arcs
AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric
More informationMultiviews and Auxiliary Views
Multiviews and Auxiliary Views Multiviews and Auxiliary Views Objectives Explain orthographic and multiview projection. Identifying the six principal views. Apply standard line practices to multiviews
More informationCreate all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
More informationDRAFT MECHANICAL DRAWING
Industrial Technology History of Drafting 9-12 Curriculum Standard One: The student will understand, classify, and be familiar with historical events, from cave writings to computer aided drafting systems,
More informationSAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046)
SAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions
More informationChapter 12 Assembly Drawings Topics Exercises
Chapter 12 Assembly Drawings Topics Exercises Assembly : Topics Summary 12.1) Definitions 12.2) Views Used in Assembly Drawings 12.3) Things to Include/Not Include 12.4) Standard Parts - Specifications
More information3. The dimensioning SYMBOLS for arcs and circles should be given:
Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 4.08 Dimensioning Form: 501 1. The MINIMUM amount of space between two, ADJACENT DIMENSION
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationGuide To British Standards
Guide To British Standards Higher Graphic Communication C O N T E N T S page TITLE BLOCK 2 DRAWING SCALES 2 LINE TYPES 3 ORTHOGRAPHIC PROJECTION 4 SECTIONAL VIEWS 4 SCREW THREADS & COMPONENTS 7 INTERUPTTED
More information*X033/12/01* X033/12/01 HIGHER STAPLE HERE NATIONAL QUALIFICATIONS. 8 Orthographic drawings are in third angle projection.
Question 2 3 4 Section A Total 7a 7b 8 9 0 EITHER OR 2 Section B Total Total Marks A + B Marks STAPLE HERE FOR OFFICIAL USE 033/2/0 NATIONAL QUALIFICATIONS 204 THURSDAY, 8 MAY.00 PM 4.00 PM GRAPHIC COMMUNICATION
More informationENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems
Spring Semester 2016 ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems Disclaimer Problems in this study guide resemble problems relating mainly to the pertinent homework assignments.
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationRequired Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.
Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will
More informationSolidworks: Lesson 4 Assembly Basics and Toolbox. UCF Engineering
Solidworks: Lesson 4 Assembly Basics and Toolbox UCF Engineering Solidworks We have now completed the basic features of part modeling and it is now time to begin constructing more complex models in the
More information14 - Dimensioning. Dimension Styles & settings. Arrows tab.
14 - Dimensioning Dimensioning is always a complex topic in any CAD system because there are so many options and variables to deal with. progecad collects all the numerous settings together in the Dimension
More information