Hot-rolled strip products Price extras in Pounds Sterling
|
|
- Mariah Brown
- 6 years ago
- Views:
Transcription
1 Hot-rolled strip products Price extras in Pounds Sterling General This document shows price extras only. The invoiced price comprises these extras plus basis price, distribution and tax. Material is charged on gross weight. Lengths and widths should be specified in whole millimetres. Unless otherwise agreed with Tata Steel, sales are carriage-paid to destination (whatever the means of transport) and the method of carriage is at the discretion of Tata Steel. All prices in this list are in GBP/tonne and do not include value-added tax or any other tax relating to the sale and delivery of the goods. If delivery is within the United Kingdom, the purchaser will bear all taxes and will reimburse Tata Steel for any taxes charged to Tata Steel in respect of the sale or delivery of the goods. All transactions are subject to Tata Steel UK Limited Standard Conditions of Sale. Specifications are subject to mill acceptance and not all combinations of extras are necessarily available. For specific information about products and their availability, please check or consult Tata Steel. 1. Quality 1.1 Steel for drawing and cold forming Tata Steel EN : 2008 /tonne DD11 0 DD12 9 DD13 16 DD13WR 21 DD14 23 DD Suitability for galvanising: supplementary extra of 3/t. 1.2 High-strength low-alloy steel Tata Steel - Tenform EN : 2013* /tonne XK XF300 S315MC 38 XK XF350 S355MC 48 XK XF XF420 S420MC 59 XK XF XF460 S460MC 72 XF500 S500MC 80 S550MC 90 S650MC 140 S700MC 166 * 3.1 certificate required 1
2 1.3 Structural steel Tata Steel EN : 2004 /tonne n.a. S185 0 S235JR 8 S235JR+N 13 S235J0 15 S235J0+N 20 S235J2 18 S235J2+N 23 S275JR 11 S275JR+N 23 S275J0 23 S275J0+N 28 S275J2 23 S275J2+N 35 S355JR 39 S355JR+N 44 S355J0 40 S355J0+N 45 S355J2 43 S355J2+N 48 S355K2 48 S355K2+N Suitability for cold forming (option C): supplementary extra of 25/t. 2. Suitability for galvanising: supplementary extra of 3/t. 3. Chemistry suitable for laser cutting: supplementary extra of 18/t. 1.4 Advanced high-strength steel Tata Steel EN 10338: 2015 EN :2006 /tonne Ferrite-bainite FB590 HDT590F 100 Complex Phase CP800HR HDT780C 165 XPF HR XPF800-UC Boron Steel 22MnB5 26MnB5 1.5 Case hardening steel Tata Steel EN : 2008 /tonne n.a. C15E High carbon steel Tata Steel EN :2000 /tonne n.a. C67S C75S 1.7 Steel for simple pressure vessels Tata Steel EN : 2005 /tonne n.a. P235S 44 P265S 57 2
3 1.8 Steel for pressure vessels Tata Steel EN : 2009 /tonne n.a. P235GH 48 P265GH Steel for gas cylinders Tata Steel EN : 2008 /tonne n.a. P245NB 28 P265NB Ship plate (with testing by and certificate from) Tata Steel Lloyds Register of Shipping Germanischer Lloyds /tonne n.a. Grade A Grade A 22 Grade B Floor Plate 2.1 Durbar /tonne Durbar pattern 50 Thickness 4mm 9 Width <1250mm 6 1 The price of Durbar is composed of the basis price, the extra for grade and dimension and the extra shown in this table, plus any appropriate extras that follow. 2 Durbar meets the requirements for mechanical properties specified by EN : Dimensions 3.1 Thickness and width: coils Thickness (mm) Width (mm) >1550 >1830 <1000 <1100 < Where dimensions are specified as a range, a maximum (with all tolerances under) or a minimum (with all tolerances over), the extras applicable are those for the mean of the range as specified or implied. 2 Other dimensions available. 4. Pickling and oiling 4.1 Thickness and width: coils Thickness (mm) Width (mm) 1000 >1550 <
4 4.2 Supplementary price extra /tonne For tensile strength 470 MPa ( S420MC ; S355J/K ; L415MB) 7 For tensile strength 700 MPa ( C60S ; S650MC; CP800HR; XPF800) Surface treatment /tonne 5 Dimensional tolerances Special oil 5 Applied in addition to pickling and oiling extras when specified. 5.1 Thickness tolerances EN : 2010 /tonne Normal 0 3/4 normal 2 2/3 normal 3 1/2 normal 6 <1/2 normal Width tolerances and side trimming (pickled coil only) EN : 2010 /tonne Normal (Mill Edge) 0 Special / outside EN : 2010 (Side Trimmed Last) Low crown Re 360MPa Re>360MPa /tonne No crown specified µm µm 17 Crown values at C40 measurement position. 6 Quantity 6.1 Coil weights Max Coil Weight Width (mm) <1000 <1100 <1200 <1300 <1400 <1500 <1600 <1700 < Coils are sold on maximum weight only. 2 A coil weight range must be agreed with Tata Steel before placing an order. 3 The minimum specifiable coil weight is 10 tonnes. 4
5 6.2 Order quantity per order item Quantity (tonnes) Tata Steel tolerance /tonne < 100 ±10% ±20% ±20% 5 1 An order item is a quantity of material specified in one order of which the specification (grade, dimension, etc) delivery time and destination is the same. 2 The minimum order item quantity is 20 tonnes. 3 Material should be ordered in quantities that are multiples of whole coils. 4 Tata Steel will seek to supply the nearest number of whole coils to meet the ordered quantity or a quantity that is within the tolerances shown. 5 Where quantity is specified as a range, a maximum (with all tolerances under) or a minimum (with all tolerances over), the extras applicable are those for the mean of the range as specified or implied. 7 Testing and inspection 7.1 Test certificates /tonne to EN : 2004 Declaration of compliance with order - type Test report (cast analysis only) - type Inspection certificate (cast analysis and mechanical properties based on specific testing) - type Other tests, not mentioned in EN : Other extras 8.1 /tonne Fit for specific application Surface critical applications (exposed) 18 Safety critical parts (safety parts) 18 9 Packaging 9.1 /tonne Plain banded 0 Tenform and Durbar are trademarks of Tata Steel. Tata Steel PO Box CA IJmuiden The Netherlands E:connect.engineering@tatasteeleurope.com IN0117:EN:PDF:0418 While care has been taken to ensure that the information contained in this publication is accurate, neither Tata Steel, nor its subsidiaries, accept responsibility or liability for errors or for information which is found to be misleading. Before using products or services supplied or manufactured by Tata Steel and its subsidiaries, customers should satisfy themselves as to their suitability. Tata Steel reserves the right to change this information at any time without prior notice. The online version will take precedence over the printed version at any moment in time. Copyright 2018 Tata Steel Europe Limited
Tolerances for Cold-Rolled Wide Stainless Steel Strip EN 10259
Stainless Steel Advisory Service Tel: 0114 267 1265 Fax 0114 266 1252 A service provided by the SSAS Information Sheet No.2.51 British Stainless Steel Association Page 1 of 5 Tolerances for Cold-Rolled
More informationdimensional and shape tolerances HOT-ROLLED STEEL PLATES AND COILS
www.ruukki.com dimensional and shape tolerances HOT-ROLLED STEEL PLATES AND COILS Scope The dimensional and shape tolerances of steel are determined by the requirements of the materials standard or the
More informationSSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING
SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING If other steel doesn t behave to perfection, try SSAB Laser. It has guaranteed flatness both before and after cutting. SSAB LASER THE ULTIMATE CHOICE FOR
More informationPREFABRICATIONS, PRECISION CUT LENGTHS AND PRECISION CUT PLATES WITH BEVELLED EDGE
www.ruukki.com PREFABRICATIONS, PRECISION CUT LENGTHS AND PRECISION CUT PLATES WITH BEVELLED EDGE HOT-ROLLED STEEL PLATES AND COILS Precision cut lengths and precision cut plates with a bevelled edge are
More informationTECHNICAL MANUAL. TERADOWEL and ULTRADOWEL. Reliable Dowel System for Floor Joints
TECHNICAL MANUAL TERADOWEL and ULTRADOWEL Reliable Dowel System for Floor Joints Version: PEIKKO GROUP 11/2018 TERADOWEL and ULTRADOWEL Reliable Dowel System for Floor Joints Dowels manufactured from high
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationA Full Line of Pipe Products for Any Application
Standard Pipe SureThread and ERW: Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic, full-line
More informationOutokumpu high performance bar
Outokumpu high performance bar outokumpu.com/longproducts Forever stainless There is now, more than ever, a powerful need for sustainable and lasting solutions that pass the test of time and can be recycled
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationSINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL. We are specialized in:
SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL We are specialized in: Big dimensions ready on stock, also in free-cutting steel Steel bars with heat
More informationSINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL. We are specialized in:
SINCE 1953 WE HAVE BEEN PRODUCING COLD-DRAWN AND GROUND-ROUND BARS IN CARBON STEEL AND ALLOY STEEL We are specialized in: Big dimensions ready on stock, also in free-cutting steel Steel bars with heat
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationContent. Hot-dip galvanized narrow strip. Areas of application. Product information
Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationA Full Line of Pipe Products for Any Application
Standard Pipe Standard Pipe: SureThread and ERW Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic,
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 6361-3 Third edition 2014-09-15 Wrought aluminium and aluminium alloys Sheets, strips and plates Part 3: Strips: Tolerances on shape and dimensions Aluminium et alliages d aluminium
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationStandard Specification for Carbon and Alloy Steel Nuts [Metric] 1
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
More informationRONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:
1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with
More informationBuilding Components Trade price list Effective 1 st August 2016
Building Components Trade price list Effective 1 st August 2016 Building Components Trade Price List CATNIC BUILDING COMPONENTS TRADE PRICE LIST All prices shown in GBP. Catnic offer a comprehensive range
More informationAppliances. Barbecue Grills. Plumbingware. Architectural
ENAMELING STEEL S Appliances Barbecue Grills Plumbingware Architectural AK Steel manufactures three enameled products to meet a variety of porcelain enameling and formability requirements: UNIVIT, VIT-PLUS,
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationTECHNICAL MANUAL. OPTIMAJOINT Free Movement Joint. Free Movement Joint System for Heavy Traffic
TECHNICAL MANUAL OPTIMAJOINT Free Movement Joint Free Movement Joint System for Heavy Traffic Version: PEIKKO GROUP 12/2018 OPTIMAJOINT Free Movement Joint Free Movement Joint System for heavy traffic
More informationREPORT HOLDER: SFS INTEC 1045 SPRING STREET WYOMISSING, PENNSYLVANIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3870 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationAlfa Laval Material Standard T
Marking of material and components for heat exchangers Prepared and edited by Materials & Chemistry Centre, Tumba, Sweden Page No. of pages Revision No. Date 1 7 10 2014-04-28 COPYRIGHT Alfa Laval AB 2014.
More informationISO 5001 INTERNATIONAL STANDARD. Cold-reduced carbon steel sheet for vitreous enamelling
INTERNATIONAL STANDARD ISO 5001 Fourth edition 2007-07-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:
More informationISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
INTERNATIONAL STANDARD ISO 7465 Fourth edition 27-11-15 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charges Guides de cabine et de contrepoids
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5001 Fifth edition 2012-08-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
More informationOperating Instructions for Pressure Sensor with Ceramic Sensor Element. Model: SEN-9601
Operating Instructions for Pressure Sensor with Ceramic Sensor Element Model: SEN-9601 We don t accept warranty and liability claims neither upon this publication nor in case of improper treatment of the
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationSteel wire for general fencing purposes
BRITISH STANDARD BS 4102:1998 ICS 77.140.65 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Specification for Steel wire for general fencing purposes Committees responsible for this
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationContents DIN 50125:
14 Contents Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Types, dimensions, and designation... 4 4.1 General... 4 4.2 Type A test pieces... 6 4.3 Type B test pieces...
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number
More informationExperimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading
RESEARCH ARTICLE OPEN ACCESS Experimental Evaluation of Metal Composite Multi Bolt Radial Joint on Laminate Level, under uni Axial Tensile Loading C Sharada Prabhakar *, P Rameshbabu** *Scientist, Advanced
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationWALCOOM. Walcoom Corporation SAFETY GRATING.
WALCOOM Walcoom Corporation SAFETY GRATING Diamond-Strut Safety Grating Diamond-Strut safety grating is made of carbon steel, stainless steel or aluminum by cold forming. It can be divided into three types:
More informationCLAMP SYSTEM
LMP SYSEM obalch ps Hejreskovvej 24 K-3490 Kvistgård enmark el.: +45 4582 0533 anske ank: 1471 488031 IN - KK: K30488031 - EUR: K4700488228 Swift code: KKK 3.5.1.1 PHL and PK N 15 - N 1 N 200 - N 0 N H
More informationISO INTERNATIONAL STANDARD. Fasteners Hot dip galvanized coatings. Éléments de fixation Revêtements de galvanisation à chaud
INTERNATIONAL STANDARD ISO 10684 First edition 2004-07-15 Fasteners Hot dip galvanized coatings Éléments de fixation Revêtements de galvanisation à chaud Reference number ISO 10684:2004(E) ISO 2004 PDF
More informationESR-1271* Reissued September 1, 2013 This report is subject to renewal July 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 4-6587 (56) 699-054 ESR-7* Reissued September, 0 This report is subject to renewal July, 05. A Subsidiary of the International Code Council DIVISION: 05 00
More informationStandard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationWELDA FASTENING PLATES
FASTENING PLATES Author: Markus Junes, M. Sc. Civ. Eng. R&D Manager, Peikko Group 1. INTRODUCTION Peikko Group has launched a new family of Fastening Plate products with resistances calculated on the basis
More informationExpertise in Resistance Welding Machines
Expertise in Resistance Welding Machines Range of Products Band saws and band knives Butt welding machines for band saws and band knives Type Series BSS and BAS IDEAL is the leading manufacturer of welding
More informationBuilding Components. Trade price list. Effective 1 st February 2018
Building Components Trade price list Effective 1 st February 2018 Building Components Catnic offer a comprehensive range of branded building components and plasterers profiles which are manufactured to
More informationOPTICAL MEASURING SYSTEMS BASED ON CAMERA CLUSTER SYSTEMS JÖRG BUSCH* AND JANUSZ BLONSKI*
OPTICAL MEASURING SYSTEMS BASED ON CAMERA CLUSTER SYSTEMS BY JÖRG BUSCH* AND JANUSZ BLONSKI* SYNOPSIS One prerequisite to achieve higher product quality in high-speed production processes is use of new
More informationLook Our New Technology
1. PRECAST WALL CONNECTORS Tunel Pey Khazar PSK Wall Nail are precast wall connectors designed for tension splicing. The structural connection between precast wall and other concrete element is achieved
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationJIS G3465 Seamless Steel Tubes for Drilling
JIS G3465 Seamless Steel Tubes for Drilling 1. Scope This Japanese Industrial Standard specifies the seamless steel tubes, hereinafter referred to as the "tubes", used for casing tube, core tube and drill
More informationEnglish version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationyour long-term reliable partner
Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationFig. (8.1) types of riveted joints
8 Riveted Joints 8. Introduction Riveting was the standard method of joining plates and structural parts before welding began to replace it with increasing rapidity. are widely used in many engineering
More informationC10 - Cold rolled steels for conventional enamelling
C10 - Cold rolled steels for conventional enamelling Enamelled steel is eminently suitable for use in the sanitary ware industry, which has very rigorous requirements with regard to hygiene and bacteriological
More informationSANDVIK 20C STRIP STEEL
SANDVIK 20C STRIP STEEL DATASHEET Sandvik 20C is a hardened and tempered carbon steel characterized by good properties in respect of: Fatigue strength and wear resistance Hardness combined with ductility
More informationHot-rolled Structural Steel Moulds and Embossed Cylinders for Effective Fibre-Cement Manufacturing
Hot-rolled Structural Steel Moulds and Embossed Cylinders for Effective Fibre-Cement Manufacturing The Speaker Andrew Kupferschmid Metallurgical Engineer President and CEO of SYRO Engineering Ltd SWITZERLAND
More informationStrip Tinning China & Asia. Strip Tinning Ltd UK. Listen, Research, Innovate, Design...
Listen, Research, Innovate, Design... Strip Tinning Ltd UK Arden Business Park Arden Road Birmingham B45 0JA United Kingdom Tel.: +44 (0)121 457 7675 Fax.: +44 (0)121 453 6532 sales@striptinning.com Strip
More informationErstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
More informationStandard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing 1
Designation: A 787 05 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing This standard is issued under the fixed designation A 787; the number immediately
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: ACM 139/1905/2 Product code: 0226H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL CERTIFICATE
More informationA. Extent of structural precast concrete work is shown on drawings and in schedules.
SECTION 03 41 00 - STRUCTURAL PRECAST CONCRETE PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification
More informationMulti-Institutional Academic Health Science & Research Center Evansville, IN
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Division 01 Specification
More informationERECTION & CONSTRUCTION
ERECTION & CONSTRUCTION High Strength Structural Bolting Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 24 th August 2007 Ref.: Key Words High Strength Bolts; Property Class
More informationThe leading Plate Service Centres in Europe
The leading Plate Service Centres in Europe Total solutions in stainless steel The Outokumpu Plate Service Centre Group Outokumpu is the leading supplier of Stainless Steel sheets & plates in Europe. Through
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: ASTROTECH STEELS PRIVATE LIMITED
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3507 Reissued 03/2018 This report is subject to renewal 03/2020. DIVISION: 06 00
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationDesign for Manufacturability Guide
Design for Manufacturability Guide WHO WE ARE Short-to-medium run metal stamping manufacturer Annual volume of 250 to 300,000 per part number We serve a very diversified mix of customers & markets Our
More information001: 2007 CEB STANDARD
001: 2007 CEB STANDARD ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEYLON ELECTRICITY BOARD SRI LANKA Specification for ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEB Standard 001: 2007 CEYLON ELECTRICITY
More informationThickness tolerances of steel plates and wide flats
(1981) (Rev.1 1989) (Rev.2 1992) (Rev.3 1995) (Rev.4 Oct 2009) (Rev.5 Feb 2012) Thickness tolerances of steel plates and wide flats.1 Scope.1.1 These requirements apply to the tolerance on thickness of
More informationSalient Features: Bhn. 3 - Jaws 4 - Jaws. 6 - Jaws
SELF CENTERING CHUCK 1 Salient Features: Body: KIC Self Centering Chucks are supplied in semi steel bodies. Semi-steel alloyed body is casted with the addition of alloys like chromium, nickel, copper manganese
More informationIndian Standard SPECIFICATION FOR USE IN FOUNDRIES. 1.1 This standard covers the requirements for chaplets for use in foundries.
Indian Standard SPECIFICATION FOR USE IN FOUNDRIES 1. SCOPE 1.1 This standard covers the requirements for chaplets for use in foundries. 2. SUPPLY OF MATERIAL 2.1 General requirements relating to the supply
More informationMB Commercial High Carbon Spring Wire
MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where
More informationResearch & Development
Research & Development This global network is a fundamental component in Tenaris s approach to serving the customer. Innovation that fuels growth At Tenaris, we aim to raise the quality and range of our
More informationTechnical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).
IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...
More informationActivating Your Ideas. Stainless steel for the oil & gas industry
Activating Your Ideas Stainless steel for the oil & gas industry Heatric produces compact heat exchangers for offshore Oil and Gas production. This market increasingly demands precise control in the manufacture
More informationRR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET
14 May 1990 ----------- SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST METAL (CHAIN-LINK FENCE FABRIC) (DETAIL SPECIFICATION) This Federal Specification is approved
More informationDrawing. Fig. 1 Drawing
Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet
More informationDesign and Manufacturing of a holding fixture to test the tensile strength of a flat specimen
Design and Manufacturing of a holding fixture to test the tensile strength of a flat specimen Joginder Singh Associate Professor, Department of Mechanical Engineering, Dr. M.R.Tyagi Professor, Department
More informationINNOVATION IN SPRING TECHNOLOGY.
INNOVATION IN SPRING TECHNOLOGY www.gutekunst-formfedern.de THE HOME OF STATE-OF-THE-ART SPRING TECHNOLOGY Gutekunst Formfedern GmbH, Siemensstraße 11, D-72285 Pfalzgrafenweiler Founded in 1990 Managing
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 SET-UP PROCEDURE PG. 4 REMOVING
More informationDesignation: F
Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under
More informationTAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
More informationOil tempered SiCrV-alloyed high tensile valve spring wire
OTEVA 75 SC, OTEVA 75 SC 1/5 PLUS Oil tempered SiCrV-alloyed high tensile valve spring wire OTEVA 75 SC is a Super Clean steel, especially intended for the manufacture of clutch/ transmission springs with
More informationID:
E-mail ID: marketing@astrotechsteels.com www.astrotechsteels.com ABOUT US We manufacture and distribute Specialized Steel products like Engineered Fasteners, Concrete Accessories, Coated Wire and other
More informationNPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works
Version:- 4.0 Date of Issue:- August 2014 Page 1 of 13 NPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works 1. Purpose The purpose of
More informationmayzen@mayzen.com.tr ABOUT US Our company was established in 1996 by Mr. Atamay Ellergezen whom had 40 years of experience before his passing away, playing important role in setup of Renault Factory (OYAK)
More informationProfiling press braking CNC MACHINING FABRICATION FINISHING
Profiling press braking CNC MACHINING FABRICATION FINISHING +44 (0)114 321 6303 enquiries@dnametalwork.com www.dnametalwork.com Profiling Bevel Capability up to 45 LASER cutting PLASMA cutting WATERJET
More informationDIN Translation by DIN-Sprachendienst. In case of doubt, the German-language original shall be considered authoritative.
March 2014 DIN 2275 D ICS 17.040.30 Supersedes DIN 2275:1977-09 Feeler gauges, English translation of DIN 2275:2014-03 Fühlerlehren, Englische Übersetzung von DIN 2275:2014-03 Jauges d épaisseur, Traduction
More informationASSEMBLY TOOLS FOR SCREWS & NUTS. Part 1: Insulated hand operated socket drive wrenches and screw drivers
Doc. KP1/3CB/TSP/09/088-1 1 Page 1 of 21 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6.
More informationINTERNATIONAL ISO STANDARD 13918
INTERNATIONAL ISO STANDARD 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationAutomotive Electrical & Injection Moulding Specialists. Listen Research Innovate Design. striptinning.com
Automotive Electrical & Injection Moulding Specialists striptinning.com We are committed to driving down costs of automotive heated glazing parts, multi-function brackets and all cabled connectors achieved
More informationTesting of friction properties of fasteners
2018-02-13 Sida 1 (31) Testing of friction properties of fasteners Contents 1 Introduction 2 2 Scope 2 3 Terms and definitions 3 4 Structure of evaluation of friction properties 5 5 Cleaning of test parts
More informationWASHERS CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES
M E T R I C E D I T I O N WASHERS 2014 CATALOG 28,000 SIZES 2,000 MATERIALS ENDLESS POSSIBILITIES Washers, Spacers and Shims Made to Order Choose from a wide variety of sizes and materials with no tooling
More informationSuitable for panels up to 12 tonne. No sharp edges. Lighter than comparable capacity systems. So, why the need for change?
STRONGER FASTER SAFER Suitable for panels up to 12 tonne. No shear bars. No interference between tension bar and mesh. Easy remote clutch release. No sharp edges. Lighter than comparable capacity systems.
More informationSteel Plate in Oil Rig Blowout Preventer Valves
Design Problem Steel Plate in Oil Rig Blowout Preventer Valves Introduction Design for Performance Alloy selection Radii and stress reduction Design for Production Mould method Orientation and cores Controlling
More information