Types of Glass by Composition

Size: px
Start display at page:

Download "Types of Glass by Composition"

Transcription

1 What is Glass? An amorphous fusion of mineral compounds that produces a transparent solid when cooled. A 3D network of atoms which lacks the repeated, orderly arrangement typical of crystalline materials. Physical properties: hard, elastic, brittle, insulative (thermal and electrical) Chemical: resistant to all but fluorine and very strong bases

2 Types of Glass by Composition Soda-Lime Glass Most common and least expensive Windowpanes and containers 60-75% quartz sand (SiO 2 ) 12-18% sodium oxide (Na 2 O) reduces melting point 12-15% quicklime (CaO) increases durability Colors are due to impurities

3 Types of Glass by Composition Lead glass ( crystal ) Decorative glassware, radiation protection Lime replaced with >20% lead oxide (PbO) increases refractive index reduces viscosity and melting point

4 Types of Glass by Composition Borosilicate Glass (Pyrex ) Cookware, laboratory glassware, light bulbs Lime replaced with boron oxide (B 2 O 3 ) increases resistance to thermal shock

5 Types of Glass by Manufacturing Laminated glass Two sheets of glass with plastic between them. Used in windshield and skylights

6 Types of Glass by Manufacturing Tempered glass Treated by heating and quickly cooling float glass OR chemically treating the surface, replacing the Na+ with K+ Designed to be much tougher and shatter into tiny pieces rather than fracture Used in auto side windows, high stress areas

7 Kendall/Hunt 8 Publishing Company Physical Characteristics Density mass divided by volume Refractive index (RI) the measure of light bending due to a change in velocity when traveling from one medium to another Fractures Color Thickness Fluorescence Markings striations, dimples, etc

8 Why Measure Density? Can be used as a screening technique with large numbers of fragments. Useful in identifying multiple sources present in the known and/or questioned samples. It is nondestructive and an intensive property (not dependant on sample mass). Need to measure very precisely in parts per hundred or thousand or better.

9 Glass Density Density can be measured by: directly determining mass and volume (usually by displacement) comparison by flotation comparison using a density gradient column Density gradient column method: Fragments of different densities settle at different levels in the column of liquid of varying density. Technique is not accurate for fragments that are cracked or contain an inclusion.

10 Density by the Flotation Method A glass particle is immersed in a liquid. The density of the liquid is adjusted by the addition of small amounts of another liquid until the glass chip remains suspended. At this point, the glass will have the same density as the liquid medium and can be compared to other relevant pieces of glass which will remain suspended, sink, or float.

11 Kendall/Hunt 12 Publishing Company Density of Glass Type of Glass Density window headlight pyrex lead glass

12 How Do Glass Windows Break? Each force causes a deformation that may leave a visible mark or fracture the glass. This can be used to determine the direction and amount of force. Glass acts initially as an elastic surface and bends away when a force is applied. When the force increases beyond its tensile strength, it cracks.

13 How Does Glass Break? Radial cracks form first and are propagated in short segments on the side opposite the force. Concentric cracks come later from continued pressure on the same side as the force applied.

14 How Does Glass Break? Edges of broken pieces of glass will show stress marks Wallner lines. In a radial crack, the stress marks are perpendicular to unloaded side and parallel to loaded side. The arrow shows the side that received the impact. 3R rule: Radial cracks form at Right angles on the Reverse side of the force

15 Stress on Flat Glass ntent/2/glass/images/breaking%20glass.jpg

16 More Glass

17 Exceptions to the Three R Rule Tempered glass dices without forming ridges Very small windows held tightly in frame can t bend or bulge appreciably Windows broken by heat or explosion no point of impact curved, smooth edges at break points

18 Types of Fractures by Projectiles Bullets are a projectile force (load) that can pass through glass. Load side is the entrance side; unloaded side is the exit side. Low-speed projectiles: rib marks may indicate where breaking force was applied As the bullet s velocity increases, the central hole becomes smaller, cracking patterns become simpler, and the exit hole becomes wider than the entrance hole.

19 Fractures by Projectiles Which side was the bullet fired from? Exit (unloaded) side is wider than entry (load) side. Stress lines on the glass edge of radial cracks form a right angle on the reverse side from the force. Stress lines on the glass edge of concentric cracks form a right angle on the same side as the force.

20 Which Bullet Hole Was First? The sequence of impacts can be determined since crack propagation is stopped by earlier cracks. In the figure above, which impact occurred first?

21 Putting it Back Together Again? Examiners can fit together two or more pieces of glass that were broken from the same object. Because glass is amorphous, no two glass objects will break the same way.

22 Learning Check In the figure below & left, which impact occurred first? In the figure above & right, from which side did the impact occur?

Properties of Matter Review: Density

Properties of Matter Review: Density Properties of Matter Review: Density Density is mass per unit of volume Density = mass volume Is an intensive property of matter: remains the same regardless of the size of the object Observe whether an

More information

Chapter 14. Glass. There is no den in the wide world to hide a rogue. Commit a crime and the earth is made of glass. Ralph Waldo Emerson

Chapter 14. Glass. There is no den in the wide world to hide a rogue. Commit a crime and the earth is made of glass. Ralph Waldo Emerson Chapter 14 Glass There is no den in the wide world to hide a rogue. Commit a crime and the earth is made of glass. Ralph Waldo Emerson Glass Analysis Students will learn: The difference between physical

More information

Glass Fragment Identification

Glass Fragment Identification Glass Fragment Identification Glass Evidence: Class or Individual? Individual: Broken glass pieces can be fitted together like a puzzle. A specific fragment can be uniquely placed at a crime scene. Class:

More information

Shattered: Forensic Glass Analysis

Shattered: Forensic Glass Analysis Shattered: Forensic Glass Analysis What is Glass? An inorganic product of fusion which has cooled to a rigid condition without crystallizing Uniform amorphous solid No specific m.p. Softens over a temperature

More information

Forensic Glass Analysis. Forensic Science

Forensic Glass Analysis. Forensic Science Forensic Glass Analysis Forensic Science Copyright and Terms of Service Copyright Texas Education Agency, 2011. These materials are copyrighted and trademarked as the property of the Texas Education Agency

More information

Forensic Glass Analysis Forensic Science

Forensic Glass Analysis Forensic Science Forensic Glass Analysis Forensic Science Copyright and Terms of Service Copyright Texas Education Agency, 2011. These materials are copyrighted and trademarked as the property of the Texas Education Agency

More information

Forensic Science. Chapter 4: Glass and Soil

Forensic Science. Chapter 4: Glass and Soil Forensic Science Chapter 4: Glass and Soil Introduction Crime scenes often involves the force of violent events. Hit-and-run, forced entry, and burglary can all involve damage and breakage of glass. Glass

More information

Glass & Soil Analysis

Glass & Soil Analysis Glass & Soil Analysis Glass Evidence Class evidence Glass evidence is considered trace evidence Most common substance submitted for trace analysis Valuable because it does not degrade easily Characterizing

More information

IDENTIFICATION OF GLASS FRAGMENTS BY THEIR PHYSICAL PROPERTIES FOR FORENSIC SCIENCE WORK

IDENTIFICATION OF GLASS FRAGMENTS BY THEIR PHYSICAL PROPERTIES FOR FORENSIC SCIENCE WORK IDENTIFICATION OF GLASS FRAGMENTS BY THEIR PHYSICAL PROPERTIES FOR FORENSIC SCIENCE WORK Walyaporn Jamjumrus 1,*, Ratchapak Chitaree 2, Kwan Arayathanitkul 2 1 Department of Forensic Science, Faculty of

More information

Interior Design Materials. Glass & Ceramics. Haval Sami Ali

Interior Design Materials. Glass & Ceramics. Haval Sami Ali Interior Design Materials Glass & Ceramics Haval Sami Ali haval.sami@ishik.edu.iq Glass Glass and ceramics are related materials, and glass is sometimes considered as no crystalline ceramic. Clay-based

More information

Forensic Analysis of Glass

Forensic Analysis of Glass CHAPTER 5 kilukilu/shutterstock. OBJECTIVES In this chapter, you should gain an understanding of: The composition of different types of glass The optical and nonoptical properties of glass Techniques to

More information

a. Tools are objects used to simplify everyday living by helping us do work. i. Examples include hammers, screwdrivers, knives, crowbars, and saws.

a. Tools are objects used to simplify everyday living by helping us do work. i. Examples include hammers, screwdrivers, knives, crowbars, and saws. a. Tools are objects used to simplify everyday living by helping us do work. i. Examples include hammers, screwdrivers, knives, crowbars, and saws. ii. Criminals will often use these tools during crimes,

More information

Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION. Jones & Bartlett Learning, LL NOT FOR SALE OR DISTRIBUT

Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION. Jones & Bartlett Learning, LL NOT FOR SALE OR DISTRIBUT istockphoto/thinkstock.. CHAPTER Forensic Analysis 5 of Glass OBJECTIVES FEATURES In this chapter you should Jones gain an & understanding Bartlett Learning, of: LLC On the Crime Scene Glass The composition

More information

Advanced Machining Processes Professor Vijay K. Jain Department of Mechanical Engineering Indian Institute of Technology, Kanpur Lecture 06

Advanced Machining Processes Professor Vijay K. Jain Department of Mechanical Engineering Indian Institute of Technology, Kanpur Lecture 06 Advanced Machining Processes Professor Vijay K. Jain Department of Mechanical Engineering Indian Institute of Technology, Kanpur Lecture 06 (Refer Slide Time: 00:17) Today we are going to discuss about

More information

4728 Gravois Ave. St. Louis, MO SIMAX

4728 Gravois Ave. St. Louis, MO SIMAX http://www.stemmerich.com 4728 Gravois Ave. St. Louis, MO 63116 314-832-7726 SALES 800-325-9528 FAX 314-832-7799 SIMAX DESCRIPTION: In 1837 The Kavalier Glassworks was established, and it has been making

More information

Frequently Asked Questions on Glass under REACH GAE Position

Frequently Asked Questions on Glass under REACH GAE Position Frequently Asked Questions on Glass under REACH GAE Position February 2018 List of questions 1. What is the nature of glass? P. 2 2. What is the composition of glass? P. 2 3. How is glass made? P. 4 4.

More information

Tempered Glass. Tempered glass. Product introduction

Tempered Glass. Tempered glass. Product introduction Home Tempered Glass Contact us Tempered Glass Tempered glass Product introduction Tempered glass is heated to the softening temperature of the glass even after the rapid cooling, so that the glass surface

More information

New Lasers Improve Glass Cutting Methods

New Lasers Improve Glass Cutting Methods New Lasers Improve Glass Cutting Methods Over the past decade, glass has become an increasingly sophisticated structural and functional component in uses as varied as flat panel displays (FPDs), automobiles

More information

ACTIVITY 14-1 GLASS FRACTURE PATTERNS

ACTIVITY 14-1 GLASS FRACTURE PATTERNS ACTIVITY 14-1 GLASS FRACTURE PATTERNS Objectives: By the end of this activity, you will be able to: 1. Use glass fracture patterns to explain how to sequence events that occurred to form the broken glass.

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION INTRODUCTION Borosilicate glass 3.3 are widely used as the basis for the construction of complete process systems all over the chemical, dyestuff, food, pharmaceutical, and petrochemical industries. -6-1

More information

Compression vs. Fusion: The Source of Strength in Fused Sight Glasses for Chemical and Pharmaceutical Processes

Compression vs. Fusion: The Source of Strength in Fused Sight Glasses for Chemical and Pharmaceutical Processes Compression vs. Fusion: The Source of Strength in Fused Sight lasses for Chemical and Pharmaceutical Processes Manufacturers of sight glasses use different combinations of metal and glass to achieve a

More information

SIGHT GLASS. Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels.

SIGHT GLASS. Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. SIGHT GLASS Sight flow indicator. A sight flow indicator is used in process pipelines

More information

Ultrasonic Machining. 1 Dr.Ravinder Kumar

Ultrasonic Machining. 1 Dr.Ravinder Kumar Ultrasonic Machining 1 Dr.Ravinder Kumar Why Nontraditional Processes? New Materials (1940 s) Stronger Tougher Harder Applications Cut tough materials Finish complex surface geometry Surface finish requirements

More information

NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM)

NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) NON-TRADITIONAL MACHINING PROCESSES ULTRASONIC, ELECTRO-DISCHARGE MACHINING (EDM), ELECTRO-CHEMICAL MACHINING (ECM) A machining process is called non-traditional if its material removal mechanism is basically

More information

Sight glass window Sight flow indicator

Sight glass window Sight flow indicator SIGHT GLASS Sight glass components allow operators to safely observe processes inside tanks, pipes, reactors and vessels. When it comes to selecting a sight glass, a wide variety of factors should be considered

More information

Kohl s Department Stores DATE(03/29/2018)Page 1. Minimum Construction Standards Glassware Intended For Food Use

Kohl s Department Stores DATE(03/29/2018)Page 1. Minimum Construction Standards Glassware Intended For Food Use Kohl s Department Stores DATE(03/29/2018)Page 1 Minimum Construction Standards Glassware Intended For Food Use Kohl s Glassware Intended for Food Use Minimum Construction Standards Overview The acceptance

More information

Manufacturing Process of the Hubble Space Telescope s Primary Mirror

Manufacturing Process of the Hubble Space Telescope s Primary Mirror Kirkwood 1 Manufacturing Process of the Hubble Space Telescope s Primary Mirror Chase Kirkwood EME 050 Winter 2017 03/11/2017 Kirkwood 2 Abstract- The primary mirror of the Hubble Space Telescope was a

More information

Dr. P. SREENIVASULU REDDY 2

Dr. P. SREENIVASULU REDDY   2 ENGINEERING PHYSICS UNIT II - ULTRASONICS SV COLLEGE OF ENGINEERING, KADAPA Syllabus: - Introduction - Production of ultrasonic's by piezoelectric method - Properties and detection Applications in non-destructive

More information

1 Tempered Glass. Effect Comparison. 1. The common glass falls into pieces with sharp edges when it's broken.

1 Tempered Glass. Effect Comparison. 1. The common glass falls into pieces with sharp edges when it's broken. 1 Tempered Glass Tempered Glass is made of common plate glass which is well treated by special methods, resulting in increasing to a large degree its intensity, capability of anti-impact and quick heat/cold

More information

HUADONG INDUSTRIAL CO.,LTD

HUADONG INDUSTRIAL CO.,LTD A. Glass Beads for Road Marking Huadong TM Glass Beads are suitable for Road &Line &Pavement Marking Paints. These glass beads are specially made for used in road marling paints and thermoplastic to provide

More information

Thermal Optical Chemical Electrical Mechanical Light & Color Glare Reduction Strengthening

Thermal Optical Chemical Electrical Mechanical Light & Color Glare Reduction Strengthening Guide to Glass - The Selection Process Glass Fabrication Abrisa Technologies is a recognized global supplier of Guide to Glass - The Selection Process high quality, fabricated glass components, optical

More information

3 Analytical report of glass beads from Hoa Diem site, Khanh Hoa, Viet Nam.

3 Analytical report of glass beads from Hoa Diem site, Khanh Hoa, Viet Nam. 3 Analytical report of glass beads from Hoa Diem site, Khanh Hoa, Viet Nam. Yoshiyuki Iizuka (Institute of Earth Sciences, Academia Sinica) Studied glass beads are listed and shown in Table 1 and Figure

More information

Relevant standards and guidelines

Relevant standards and guidelines ECKELT I STANDARDS I Page 1 Relevant standards and guidelines Austrian Standard ÖNORM EN 2 ETAG Guideline for European technical approval 11 ECKELT I STANDARDS I Page 2 Austrian Standard ÖNORM EN 81-1

More information

CHAPTER 70 GLASS AND GLASSWARE

CHAPTER 70 GLASS AND GLASSWARE i.exe CHAPTER 70 GLASS AND GLASSWARE Notes : 1. This Chapter does not cover : (a) Goods of heading 3207 (for example, vitrifiable enamels and glazes, glass frit, other glass in form of powder, granules

More information

Masking: Each mirrored sheet is well protected by a durable paint backing and

Masking: Each mirrored sheet is well protected by a durable paint backing and STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom

More information

Invisibility cloaks. Lesson 7

Invisibility cloaks. Lesson 7 Lesson 7 Invisibility cloaks Clip 18 (2'04") Clip 19 (2'21") Clip 20 (2'52") Demonstrations Small toy car Sand Water pearls (clear) Large beaker and water trough Vegetable oil (approximately 1.5 litres)

More information

From Sand to Silicon Making of a Chip Illustrations May 2009

From Sand to Silicon Making of a Chip Illustrations May 2009 From Sand to Silicon Making of a Chip Illustrations May 2009 1 The illustrations on the following foils are low resolution images that visually support the explanations of the individual steps. For publishing

More information

Processing guide for IMAGIN

Processing guide for IMAGIN Processing guide for IMAGIN 2006 Updated information on products, product availability and processing guidelines are regularly updated on the AGC Flat Glass Europe website: www.yourglass.com p 1 / 1 Table

More information

Improving Edge Quality in Film Applications with Tangent Shear Slitting

Improving Edge Quality in Film Applications with Tangent Shear Slitting Improving Edge Quality in Film Applications with Tangent Shear Slitting Presented by: Sean Craig General Manager, Maxcess-Tidland Date: October 17, 2017 What is Fracture Mechanics? The study of how things

More information

Essential Physics I: Reflection and refraction. Lecture 12:

Essential Physics I: Reflection and refraction. Lecture 12: Essential Physics I: E Reflection and refraction Lecture 12: 3-7-2017 Last lecture: review Fluids Hydrostatic equilibrium Archimedes Principal P 0 mg h P = P 0 + g h for liquid (constant ) Buoyancy: pressure

More information

Finishing Process. By Prof.A.Chandrashekhar

Finishing Process. By Prof.A.Chandrashekhar Finishing Process By Prof.A.Chandrashekhar Introduction Finishing process are different from other manufacturing processes. The distinction between the finishing processes and other manufacturing processes

More information

Modeling Transparent Armor Behaviors Subject to Projectile Impact

Modeling Transparent Armor Behaviors Subject to Projectile Impact Modeling Transparent Armor Behaviors Subject to Projectile Impact Xin Sun 1 and Kevin C. Lai PO BOX 999 Pacific Northwest National Laboratory Richland, WA 99352 Tara Gorsich and Douglas W. Templeton USARMY

More information

(1) Brass, an alloy of copper and zinc, consists of 70% by volume of copper and 30% by volume of zinc.

(1) Brass, an alloy of copper and zinc, consists of 70% by volume of copper and 30% by volume of zinc. PhysicsAndMathsTutor.com 1 Q1. (a) Define the density of a material....... (1) Brass, an alloy of copper and zinc, consists of 70% by volume of copper and 30% by volume of zinc. density of copper = 8.9

More information

How an ink jet printer works

How an ink jet printer works How an ink jet printer works Eric Hanson Hewlett Packard Laboratories Ink jet printers are the most common type of printing devices used in home environments, and they are also frequently used personal

More information

Introduction Description Capabilities Applications Characteristics Additional Important Information

Introduction Description Capabilities Applications Characteristics Additional Important Information Heat-Treated Glass Introduction Description Capabilities Applications Characteristics Additional Important Information Section 7 03 Sybase Dublin, California Architect: RMW Architecture and Interiors Section

More information

DRAFT STANDARDS (September 2010) - pren ISO (documents on mechanical strength measurement methods): revision

DRAFT STANDARDS (September 2010) - pren ISO (documents on mechanical strength measurement methods): revision DRAFT STANDARDS (September 2010) Ready for publication - ISO DIS 12543 Parts 1 to 6 (laminated glass): revision Finalisation for publication - pren ISO 1288 1-5 (documents on mechanical strength measurement

More information

Selection Guide for Flat Thermally Toughened Soda Lime Silicate Safety Glass

Selection Guide for Flat Thermally Toughened Soda Lime Silicate Safety Glass Selection Guide for Flat Thermally Toughened Soda Lime Silicate Safety Glass February 2016 Administer by PO Box 7861, Halfway House, 1685 ASSOCIATION OF ARCHITECTURAL ALUMINIUM MANUFACTURERS OF SOUTH AFRICA

More information

LIGHT REFLECTION AND REFRACTION

LIGHT REFLECTION AND REFRACTION LIGHT REFLECTION AND REFRACTION 1. List four properties of the image formed by a plane mirror. Properties of image formed by a plane mirror: 1. It is always virtual and erect. 2. Its size is equal to that

More information

6 Tips for Critical Sight Glass Applications

6 Tips for Critical Sight Glass Applications White Paper 6 Tips for Critical Sight Glass Applications Sight glass applications require varying levels of consideration during the design phase. In all applications, sight glasses will be subjected to

More information

Semiconductor Physics and Devices

Semiconductor Physics and Devices Metal-Semiconductor and Semiconductor Heterojunctions The Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) is one of two major types of transistors. The MOSFET is used in digital circuit, because

More information

Specialty Glass Materials Products & Specifications

Specialty Glass Materials Products & Specifications Products & Specifications September 2016 Web: www.abrisatechnologies.com - E mail: info@abrisatechnologies.com - Tel: (877) 622-7472 Page 1 It all starts with the basic element, the glass. Each substrate

More information

GLASS PRE-READING QUESTIONS

GLASS PRE-READING QUESTIONS Glass GLASS PRE-READING QUESTIONS 1. Do you know how glass is made? 2. Who do you think invented glass? 3. What does an archeologist do? 4. Do you know what city is world famous for its beautiful glass-making?

More information

Lab V Multimode Optical Fibers ECE 476

Lab V Multimode Optical Fibers ECE 476 Lab V Multimode Optical Fibers ECE 476 I. Introduction The purpose of this lab is to introduce you to multimode fiber optics. We will focus on coupling a fiber to a laser. II. Background Fiber Geometry

More information

Bending. the bend radius is measured to the inner surface of the bent part

Bending. the bend radius is measured to the inner surface of the bent part Bending the bend radius is measured to the inner surface of the bent part there is a plane which separates the tension and compression zones. This plane is called neutral axis. The position of neutral

More information

Mechanical behaviour of glass during cyclic instrumented indentation

Mechanical behaviour of glass during cyclic instrumented indentation Materials Science-Poland, Vol. 28, No. 1, 2010 Mechanical behaviour of glass during cyclic instrumented indentation A. CHORFA 1*, M. HAMIDOUCHE 2, M.A. MADJOUBI 2, F. PETIT 3 1 Department of Mechanics,

More information

GLASS HEAT TREATMENT MULTIVER GLASS TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS. DATA SHEET / Quebec. Version 2.

GLASS HEAT TREATMENT MULTIVER GLASS TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS. DATA SHEET / Quebec. Version 2. MULTIVER GLASS GLASS HEAT TREATMENT TEMPERED GLASS HEAT-STRENGTHENED GLASS HEAT SOAK TESTED TEMPERED GLASS DATA SHEET / Quebec Version 2.1 Type of Glass Offered by Multiver TEMPERED GLASS To increase the

More information

Design Guidelines for FDM technology

Design Guidelines for FDM technology Design Guidelines for FDM technology This guideline is supposed to be used by people who already have knowledge in 3D design, CAD/CAM, etc. and it s goal is to show the key points when designing a model

More information

Makrolon Solid Polycarbonate Sheets

Makrolon Solid Polycarbonate Sheets 1. General remarks Tools sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools

More information

32nm High-K/Metal Gate Version Including 2nd Generation Intel Core processor family

32nm High-K/Metal Gate Version Including 2nd Generation Intel Core processor family From Sand to Silicon Making of a Chip Illustrations 32nm High-K/Metal Gate Version Including 2nd Generation Intel Core processor family April 2011 1 The illustrations on the following foils are low resolution

More information

Coating of the fibre during the drawing process C03C 25/10 Optical fibres per se with polarisation maintaining properties in light guides

Coating of the fibre during the drawing process C03C 25/10 Optical fibres per se with polarisation maintaining properties in light guides CPC - C03B - 2017.08 C03B MANUFACTURE, SHAPING, OR SUPPLEMENTARY PROCESSES Relationships with other classification places C03B concerns all aspects of glass manufacture processes, apparatus and C03C relates

More information

Intrinsic Semiconductor

Intrinsic Semiconductor Semiconductors Crystalline solid materials whose resistivities are values between those of conductors and insulators. Good electrical characteristics and feasible fabrication technology are some reasons

More information

An Introduction to CCDs. The basic principles of CCD Imaging is explained.

An Introduction to CCDs. The basic principles of CCD Imaging is explained. An Introduction to CCDs. The basic principles of CCD Imaging is explained. Morning Brain Teaser What is a CCD? Charge Coupled Devices (CCDs), invented in the 1970s as memory devices. They improved the

More information

A new method for bending solid wood high frequency heating of beech

A new method for bending solid wood high frequency heating of beech A new method for bending solid wood high frequency heating of beech D. Sandberg, J. Johansson 1 Abstract In their natural state, most hardwoods can not be bent to any appreciably small radius of curvature,

More information

Simulation Research on Pistol Bullet Penetrating Gelatin Target with Soft Body Armor

Simulation Research on Pistol Bullet Penetrating Gelatin Target with Soft Body Armor 2016 International Conference on Manufacturing Science and Information Engineering (ICMSIE 2016) ISBN: 978-1-60595-325-0 Simulation Research on Pistol Bullet Penetrating Gelatin Target with Soft Body Armor

More information

Potential Induced degradation

Potential Induced degradation Potential Induced degradation By: Waaree Energies Limited Abstract The PID defect is affecting all the manufacturers around the world. This defect is byproducts of the aggressive competition in the solar

More information

Glossary of Terms U.K.

Glossary of Terms U.K. Glossary of Terms U.K. Acoustic laminate a laminated glass with special interlayers with better acoustic performance than ordinary laminated glass. Acoustic performance simply how much noise does a product

More information

Anodic Bonding of Zirconium-based Metallic Glass

Anodic Bonding of Zirconium-based Metallic Glass Anodic Bonding of Zirconium-based Metallic Glass TAKAHASHI Makoto*, IKEUCHI Kenji**, KIMURA Hisamichi*** and INOUE Akihisa*** Abstract Zirconium-based metallic glass was anodically-bonded to soda-lime

More information

Global Flat Glass Market Report

Global Flat Glass Market Report Global Flat Glass Market Report --------------------------------------------------- 2013 Executive Summary Glass is a non-crystalline solid but brittle material, chiefly made up of about 75% silica (SiO2),

More information

Introducing a revolutionary, printed LED panel, ideal for low-profile lighting applications.

Introducing a revolutionary, printed LED panel, ideal for low-profile lighting applications. Introducing a revolutionary, printed LED panel, ideal for low-profile lighting applications. The can be safely and easily cut to length for in-field customization and design. The simple addition of Nth-Connectors,

More information

Enhancing The Skyline With Quality. Air flotation technology by Tecnoglass TECNOAIR. Record-breaking quality on tempered glass.

Enhancing The Skyline With Quality. Air flotation technology by Tecnoglass TECNOAIR. Record-breaking quality on tempered glass. Enhancing The Skyline With Quality Air flotation technology by Tecnoglass TECNOAIR Record-breaking quality on tempered glass. www.tecnoglass.com Air flotation technology by Tecnoglass TECNOAIR TecnoAir

More information

Introduction To NDT. BY: Omid HEIDARY

Introduction To NDT. BY: Omid HEIDARY Introduction To NDT BY: Omid HEIDARY NDT Methods Penetrant Testing Magnetic Particle Testing Eddy Current Testing Ultrasonic Testing Radiographic Testing Acoustic Emission Infrared Testing Visual Testing

More information

Vocabulary. Unit 9 Forms of Energy. ENERGY: The capacity for doing work.

Vocabulary. Unit 9 Forms of Energy. ENERGY: The capacity for doing work. Unit 9 Forms of Energy Main Idea: There are many forms of energy, including radiant energy and chemical energy. Energy can change form. ENERGY: The capacity for doing work. Heat, Light and Radiant Energy

More information

Chapter 05: Wave Motions and Sound

Chapter 05: Wave Motions and Sound Chapter 05: Wave Motions and Sound Section 5.1: Forces and Elastic Materials Elasticity It's not just the stretch, it's the snap back An elastic material will return to its original shape when stretched

More information

IR LEAD-LESS REFLOW OVEN

IR LEAD-LESS REFLOW OVEN Contents Introduction...3 Main technique parameter...4 Structure introduction...5 Function key introduction.....6 The function of temperature curve...6-8 Common alloy solder temperature curve adjustment

More information

SPECIFICATIONS FOR 3M TM PRESTIGE SUN CONTROL WINDOW FILMS

SPECIFICATIONS FOR 3M TM PRESTIGE SUN CONTROL WINDOW FILMS SPECIFICATIONS FOR 3M TM PRESTIGE SUN CONTROL WINDOW FILMS 1.0 Scope This specification is for an abrasion resistant solar control window film which when applied to the interior window surface will reduce

More information

Semiconductor Back-Grinding

Semiconductor Back-Grinding Semiconductor Back-Grinding The silicon wafer on which the active elements are created is a thin circular disc, typically 150mm or 200mm in diameter. During diffusion and similar processes, the wafer may

More information

(( Manufacturing )) Fig. (1): Some casting with large or complicated shape manufactured by sand casting.

(( Manufacturing )) Fig. (1): Some casting with large or complicated shape manufactured by sand casting. (( Manufacturing )) Expendable Mold Casting Processes: Types of expendable mold casting are: 1 ) Sand casting. 2 ) Shell molding. 3 ) Vacuum molding. 4 ) Investment casting. 5 ) Expanded polystyrene process.

More information

Standard Operating Procedure. Garibaldi Glass Capabilities

Standard Operating Procedure. Garibaldi Glass Capabilities Garibaldi Glass Capabilities 1. Garibaldi Glass Capability Guidelines Table Of Contents Purpose and Scope Flat Annealed Glass Heat Treated Safety Glass Heat Soaked Glass Ceramic Frit Fabricated Glass Laminated

More information

Innovative Leading in Glass. Glass glossary

Innovative Leading in Glass. Glass glossary Glass glossary Innovative Leading in Glass Acrylic A type of thermoplastic, sometimes used for glazing. Good weather resistance, shatter resistance and visual clarity. Air Infiltration The amount of air

More information

LABORATORY SAFETY SERIES: Safe Handling Of Glassware

LABORATORY SAFETY SERIES: Safe Handling Of Glassware ERI Safety Videos Videos for Safety Meetings 2961 LABORATORY SAFETY SERIES: Safe Handling Of Glassware Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information

More information

Mastics To fill and glue marble, stone and its derivatives

Mastics To fill and glue marble, stone and its derivatives To fill and glue marble, stone and its derivatives to fill and glue marble, stone and its derivatives The filling application can be done on marble or travertine in order to repair cracks, holes and micro-cracks

More information

Influence of abrasive material on abrasive waterjet cutting process

Influence of abrasive material on abrasive waterjet cutting process Influence of abrasive material on abrasive waterjet cutting process I. A. Perianu, D. Ionescu, C. Ciucă National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania E-mail: aperianu@isim.ro

More information

Electronics Materials-Stress caused by thermal mismatch

Electronics Materials-Stress caused by thermal mismatch Electronics Materials-Stress caused by thermal mismatch The point was well made in the early 1970s by David Boswell that surface mount assemblies have many issues in common with civil engineering. For

More information

CHAPTER 2 ELECTROMAGNETIC FORCE AND DEFORMATION

CHAPTER 2 ELECTROMAGNETIC FORCE AND DEFORMATION 18 CHAPTER 2 ELECTROMAGNETIC FORCE AND DEFORMATION 2.1 INTRODUCTION Transformers are subjected to a variety of electrical, mechanical and thermal stresses during normal life time and they fail when these

More information

AGATE CRAFT. Introduction: What is an agate? ( Agate rhymes with bag it. ) Agates are made of silica, SiO 2

AGATE CRAFT. Introduction: What is an agate? ( Agate rhymes with bag it. ) Agates are made of silica, SiO 2 AGATE CRAFT Purpose of craft: To learn about agates in a hands-on way Target age group: ages 8-12 Materials needed: a 8.5 x 11 sheet of clear plastic (copier transparencies are ideal and can be purchased

More information

Processes Advantages Disadvantages Identifying features Products

Processes Advantages Disadvantages Identifying features Products Plastics Processes Plastics manufacturing processes are mostly mass production processes with high volumes of output. The high cost of machinery and tooling is offset by the speed and volume of production.

More information

LlIGHT REVIEW PART 2 DOWNLOAD, PRINT and submit for 100 points

LlIGHT REVIEW PART 2 DOWNLOAD, PRINT and submit for 100 points WRITE ON SCANTRON WITH NUMBER 2 PENCIL DO NOT WRITE ON THIS TEST LlIGHT REVIEW PART 2 DOWNLOAD, PRINT and submit for 100 points Multiple Choice Identify the choice that best completes the statement or

More information

ALONA YANSHINA EXERCISE 1.1

ALONA YANSHINA EXERCISE 1.1 material makeup: log ALONA YANSHINA EXERCISE 1.1 timeline + development log cabin - interlocked corners by cutting notches in the ends of the logs. using log joinery technique, structures grew higher logs

More information

Cover: Display in Split, Croatia, equipped with CONTURAN from Infinitus Ltd, imotion G6 outdoor LCD technology Infinitus / SCHOTT AG

Cover: Display in Split, Croatia, equipped with CONTURAN from Infinitus Ltd, imotion G6 outdoor LCD technology Infinitus / SCHOTT AG Technical Glazing 1 2 SCHOTT is a leading international technology group in the areas of specialty glass and glass-ceramics. With more than 130 years of outstanding development, materials and technology

More information

ColorCore Laminate: Fabrication

ColorCore Laminate: Fabrication ColorCore Laminate: Fabrication Formica ColorCore is a high quality surfacing material. Most of the conventional tools, machines and methods used in the fabrication of normal laminates apply, but some

More information

The absorption of the light may be intrinsic or extrinsic

The absorption of the light may be intrinsic or extrinsic Attenuation Fiber Attenuation Types 1- Material Absorption losses 2- Intrinsic Absorption 3- Extrinsic Absorption 4- Scattering losses (Linear and nonlinear) 5- Bending Losses (Micro & Macro) Material

More information

Low Refractive Index Coating and Index Matched Adhesive Bonding for Lightguide Applications

Low Refractive Index Coating and Index Matched Adhesive Bonding for Lightguide Applications Technical Disclosure Commons Defensive Publications Series November 17, 2017 Low Refractive Index Coating and Index Matched Adhesive Bonding for Lightguide Applications Thanh Tu Yeh-Jiun Tung Ozan Cakmakci

More information

Corso di Studi di Fabbricazione

Corso di Studi di Fabbricazione Corso di Studi di Fabbricazione 3a Richiami dei processi tecnologici di trasformazione FUNDAMENTAL OF METAL FORMING 1 METAL FORMING Large group of manufacturing processes in which plastic deformation is

More information

Bright Precious Metal Preparations for the Production of Decals for Glass

Bright Precious Metal Preparations for the Production of Decals for Glass Bright Precious Metal Preparations for the Production of Decals for Glass 1 General Information Heraeus supplies bright gold and bright platinum pastes for the production of decals for glass with a precious

More information

ARTICLE 28 VISUAL EXAMINATION STANDARDS

ARTICLE 28 VISUAL EXAMINATION STANDARDS ARTICLE 28 VISUAL EXAMINATION STANDARDS Specification for Classifying Visual Defects in Glass-Reinforced Laminates and [ASTM D 2563-70 Parts Made Therefrom... 639 (1977)] 637 ARTICLE 28 VISUAL EXAMINATION

More information

1 of 5 1/10/ :48 AM

1 of 5 1/10/ :48 AM Two Methods: Using a Furnace or Kiln Using a Charcoal Barbecue Making glass is a very ancient process, with archaeological evidence of glass making dating back to before 2500 BC. [1] Once a rare and prized

More information

Rear Side Processing of Soda-Lime Glass Using DPSS Nanosecond Laser

Rear Side Processing of Soda-Lime Glass Using DPSS Nanosecond Laser Lasers in Manufacturing Conference 215 Rear Side Processing of Soda-Lime Glass Using DPSS Nanosecond Laser Juozas Dudutis*, Paulius Gečys, Gediminas Račiukaitis Center for Physical Sciences and Technology,

More information

Hand Torch or Flame Brazing Principles

Hand Torch or Flame Brazing Principles Hand Torch or Flame Brazing Principles Introduction Hand-torch brazing is inexpensive and flexible, making it ideally suited to small production batches or production runs involving differing components.

More information

Terminology Annealed glass Glass created by a process that moves it, in a molten form, along a long oven where it is heated and then very slowly coole

Terminology Annealed glass Glass created by a process that moves it, in a molten form, along a long oven where it is heated and then very slowly coole Architectural Glass: Yesterday, Today and Tomorrow 2011 International Window Cleaning Association Annual Convention Greg Carney President C. G. Carney Associates, Inc. Great To Be Back! 2002 IWCA Annual

More information

Description of the Method Developed for Dye Penetrant Analysis of Cracked Solder Joints

Description of the Method Developed for Dye Penetrant Analysis of Cracked Solder Joints Description of the Method Developed for Dye Penetrant Analysis of Cracked Solder Joints Background The extension of cracks in solder joints after fatigue testing is usually evaluated using crosssectioning

More information