D I A M O N D P U L S E - T E C H

Size: px

Start display at page:

Download "D I A M O N D P U L S E - T E C H"

Mervyn Mason
5 years ago
Views:

1 D I A M O N D P U L S E - T E C H

2 DIAMOND PULSE-TECH ADVANTAGES D I A M O N D P U L S E - T E C H YOU CAN WORK IN ANY ENVIRONMENT also in finished and furnished rooms because, by drilling in dry with dust extraction, no dirt, dust or mud around and you do not disperse water around. What is DIAMOND PULSE TECH? It is an innovative core drilling system which allows you to drill both dry and with water, in any building material. How does it work? The diamond core bit rotates and simultaneously performs an hammering action on the material to be drilled, this action is commonly called MICRO-PERCUSSION. What can I drill? You can drill any type of construction material including reinforced concrete, dry or, if you prefer, with water. What diameters can I drill in reinforced concrete? From a minimum of 42 mm to a maximum of 252 mm, depending on the machine model you choose. What length can I drill? The CARDI dry drilling core bits have a useful length of 320 mm and with an extension you can reach a depth of 620 mm. The CARDI wet drilling core bits have a useful length of 450 mm and with a 500 mm extension you can reach 950 mm. Can I also drill through steel bars? Of course, you can cut the reinforcement rods of important diameters without any problem, both dry and with water. Which diamond core bits should I use to drill with micro-percussion? Specific core bits for micro-percussion, both dry and with water. You can however use the wet core bits that you already have in stock or that you find on the market, but excluding the micropercussion action. In this case the machine works like a normal core drill machine. What about drilling time? With DIAMOND PULSE TECH you reduce drilling time compared to standard wet core drilling. What equipment do I need? The complete equipment includes: a DIAMOND PULSE-TECH core drill machine with micro-percussion; a suitable DIAMOND PULSE-TECH drill stand (if you don t want to work hand-held); a vacuum cleaner, when dry drilling; for dry drilling: specific diamond core bit, CARDI DPT series; for wet drilling: specific diamond core bit for micro-percussion and water. Should I always drill with the drill stand? To obtain the maximum performance it is always better to work with the drill stand. You can work hand-held for light and short-term drilling tasks. Why HYBRID? Because you can drill in different ways: - dry with micro-percussion - wet with micro-percusison - wet withou micro-percussion YOU SAVE TIME working dry you don t have to worry about bringing water to your drilling machine and, above all, you don t have to clean the area where you drill the hole. Your work is finished and clean! INCREASED PRODUCTIVITY drilling in dry the overall time required to complete the job is lower and therefore, during the day, you can make more holes. NEW DRILLING WORKS with dry drilling you can do more works that were avoided because of the water for wet drilling. HIGHER PROFITS all these advantages lead to more profit for your business. DRY DRILLING POSSIBILITIES: MICRO-PERCUSSION and dust extraction HYBRID DRILLING POSSIBILITIES: MICRO-PERCUSSION and dust extraction + classic wet drilling + MICRO-PERCUSSION wet drilling

(230 V) W 2200 (MAX 2640) R.P.M. idle / on load r.p.

3 DP 2200 MA-16 CORE DRILL FOR DRY DRILLING DRY DS 200 DRY DRILLING CORE DRILL SYSTEM WITH ANTI-VIBRATION FEATURE DRILL STAND: LDP CORE DRILL: DP 2200 MA-16 DRILLING Ø mm DRY DRILLING Power (230 V) W 2200 (MAX 2640) R.P.M. idle / on load r.p.m 1200 / 880 Hits idle / on load n/min / Kg 7,1 Bit spindle connection PRCD - Residual current device Supplied into 1 1/4 UNC not necessary heavy duty plastic case

DPH 3000 ME-17 CORE DRILL FOR DRY & WET DRILLING HYBRID HS 250 DRY & WET CORE

3000 ME-17 DRILLING Ø mm HYBRID (dry & wet) 52-132 52-102 52-252* with spacer

m 1250 / 840 Hits idle / on load n/min 30000 / 20160 Kg 8,2 Bit spindle connection

4 DPH 3000 ME-17 CORE DRILL FOR DRY & WET DRILLING HYBRID HS 250 DRY & WET CORE DRILL SYSTEM WITH ANTI-VIBRATION FEATURE DRILL STAND: LDP CORE DRILL: DPH 3000 ME-17 DRILLING Ø mm HYBRID (dry & wet) * with spacer accessory * Power (230 V) W 3000 (MAX 3650) R.P.M. idle / on load r.p.m 1250 / 840 Hits idle / on load n/min / Kg 8,2 Bit spindle connection PRCD - Residual current device Supplied into 1 1/4 UNC supplied as standard heavy duty plastic case

DPH 3500 SE DRILL MOTOR FOR DRY & WET DRILLING HYBRID HS 300

STAND: CDP 520 DRILLING Ø HYBRID (dry & wet) DRILL MOTOR: DPH

5 DPH 3500 SE DRILL MOTOR FOR DRY & WET DRILLING HYBRID HS 300 DRY & WET CORE DRILL SYSTEM WITH ANTI-VIBRATION FEATURE DRILL STAND: CDP 520 DRILLING Ø HYBRID (dry & wet) DRILL MOTOR: DPH 3500 SE Power (230 V) W 3420 (MAX 4400) R.P.M. idle / load I II III r.p.m 668 / 438 r.p.m 1096 / 718 r.p.m 1826 / 1196 Hits idle / load I II III n/min / n/min / n/min / Bit spindle connection PRCD - Residual current device Kg /4 UNC supplied as standard

LDP 200-2 ANTI-VIBRATION CORE DRILL STAND FOR

DRILL STAND FOR STATIONARY CORE DRILL MOTOR

slide pads Carriage steel rollers and bearings

Column / Mast steel 50x50 mm Base compact

Feeding Handle Core drill mounting CARDI

tail quick connect Rear bars for stability

stability improving 2 x steel made re-bars

0 to 45 Fixing system with anchor Fixing

6 LDP ANTI-VIBRATION CORE DRILL STAND FOR HAND-HELD MACHINE CDP 520 ANTI-VIBRATION CORE DRILL STAND FOR STATIONARY CORE DRILL MOTOR Carriage sliding with special self-lubricating slide pads Carriage steel rollers and bearings Column / Mast extruded aluminum 50x50 mm Column / Mast steel 50x50 mm Base compact aluminum base Base professional high resistance steel base Feeding Handle ANTI-VIBRATION - vibrations reduced about 50% Feeding Handle ANTI-VIBRATION - vibrations reduced about 50% Core drill mounting CARDI quick connect Core drill motor mounting dove tail quick connect Rear bars for stability improving 2 x steel made re-bars Rear bars for stability improving 2 x steel made re-bars Tilting angle from 0 to 45 Tilting angle from 0 to 45 Fixing system with anchor Fixing system with ancor Max carriage travel 577 mm Max carriage travel 680 mm Max drilling diameter 202 mm Max drilling diameter 500 mm 12 Kg 24 Kg

DPT DIAMOND CORE BITS DRY DRILLING WITH MICRO-PERCUSSION CONNECTION 1 1/4 - LASER WELDED SEGMENTS - USABLE LENGHT 320 mm CDS DIAMOND CORE BITS FOR

- H ITEM NUMBER DIAMETER (mm) SEGMENTS SPECS. N x L - SP.

20-3,8-10 DPT 122 127 9 x 20-3,8-10 DPT 127 132 9 x 20-3,8-10 DPT 132 152 14 x 20-4,3-10 DPT 152 SUITABLE FOR DRY DRILLING OF: Abrasive materials Clay

CDS 068 72 4 x 24-3,8-8 CDS 072 82 4 x 24-3,8-8 CDS 082 92 4 x 24-3,8-8 CDS 082 102 5 x 24-3,8-8 CDS 102 SUITABLE FOR HAND-HELD DRY DRILLING OF:

24-3,8-8 CDS 122 202 18 x 20-4,3-10 DPT 202 127 6 x 24-3,8-8 CDS 127 252 20 x 20-4,5-10 DPT 252 132 6 x 24-4,3-8 CDS 132 N = n of segments L = segments

7 DPT DIAMOND CORE BITS DRY DRILLING WITH MICRO-PERCUSSION CONNECTION 1 1/4 - LASER WELDED SEGMENTS - USABLE LENGHT 320 mm CDS DIAMOND CORE BITS FOR HAND-HELD DRY DRILLING WITH MICRO-PERCUSSION CONNECTION 1 1/4 - LASER WELDED SEGMENTS - USABLE LENGHT 250 mm DIAMETER (mm) SEGMENTS SPECS. N x L - SP. - H ITEM NUMBER DIAMETER (mm) SEGMENTS SPECS. N x L - SP. - H ITEM NUMBER 52 4 x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-3,8-10 DPT x 20-4,3-10 DPT 152 SUITABLE FOR DRY DRILLING OF: Abrasive materials Clay hollow and full bricks blocks Poroton 42 3 x 20-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS x 24-3,8-8 CDS 102 SUITABLE FOR HAND-HELD DRY DRILLING OF: Abrasive materials Clay hollow and full bricks blocks Poroton x 20-4,3-10 DPT x 24-3,8-8 CDS x 20-4,3-10 DPT x 24-3,8-8 CDS x 20-4,3-10 DPT x 24-3,8-8 CDS x 20-4,5-10 DPT x 24-4,3-8 CDS 132 N = n of segments L = segments lenght SP. = segments thickness H = segments height x 24-4,3-8 CDS x 24-4,3-8 CDS x 24-4,3-8 CDS x 24-4,3-8 CDS x 24-4,3-8 CDS 202 N = n of segments L = segments lenght SP. = segments thickness H = segments height

CARDI ACCESSORIES CORE BIT EXTENSIONS 1 1/4 -

mm 501370 300 mm 502410 500 mm CARDIFACILE -

COMPATIBILITY 506102 HAND-HELD CORE DRILLS

CLASS M VACUUM CLEANER AXIAL GUIDE DEVICE FOR

504841 COMPATIBILITY DP 2200 MA-16 DPH 3500

(with a normal drill) into the material you

This hole is used as a guide hole for the

Power (230V) Filter Filtration Class Dust

surface M class (1 micron) steel container,

8 CARDI ACCESSORIES CORE BIT EXTENSIONS 1 1/4 - ERGAL ALUMINUM CODE USABLE LENGHT mm mm mm CARDIFACILE - QUICK BIT UNSCREW DEVICE 1 1/4 CODE COMPATIBILITY HAND-HELD CORE DRILLS ALL CARDI CORE DRILLS DPT VAC 2 MOTORS CLASS M VACUUM CLEANER AXIAL GUIDE DEVICE FOR HAND-HELD DRILLING FOR 1 1/4 CORE BITS CODE COMPATIBILITY DP 2200 MA-16 DPH 3500 ME-17 This device need you to drill an hole (with a normal drill) into the material you have to core drill. This hole is used as a guide hole for the device. Power (230V) Filter Filtration Class Dust container Air flow Max depression Dimensions Included accessories 2 x 1200 W motors individually activated polyester / 6000 cm2 surface M class (1 micron) steel container, capacity 13 liters 360 M3/h 2500 mmh2o 38 x 48 cm - H=80 cm 20 Kg hoses and floor cleaning accessory ANCHOR FIXING ON CONCRETE CODE DESCRIPTION ANCHORING FIXING KIT pcs - ANCHORS M SETTING TOOL ANCHORS M12

9 Via Leonardo da Vinci, 21 I Pontida (BG), Italy phone rev.00 EN

GENERAL CATALOGUE drilling / cutting / sawing

GENERAL CATALOGUE drilling / cutting / sawing www.cardi.biz GENERAL CATALOGUE 2016-2017 drilling / cutting / sawing TABLE OF CONTENTS HAND HELD CORE DRILLS pag. 3 HAND HELD CORE DRILLS WITH DRILL STAND pag. 6 CORE DRILL KITS FOR SPECIFIC APPLICATIONS