Enterprise ADAPTABLE KEWAUNEE MOVEABLE WORKSTATIONS. encouraging new discovery
|
|
- Dora Hensley
- 5 years ago
- Views:
Transcription
1 Enterprise ADAPTABLE MOVEABLE WORKSTATIONS KEWAUNEE encouraging new discovery
2 Freestanding Tables Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving systems Pre-plumbed integrated services Pre-wired integrated power and data
3 Contents Enterprise Workstations... 2 Single-sided Support Frames... 4 Double-sided Support Frames... 8 Worksurface Frames Free-standing Tables Work Tops Enterprise Shelving Steel & Wood Cabinets Wood Mobile Cabinets Steel Mobile Cabinets Add-A-Drawer Cabinets Mobile Cabinet Tops Suspended Base Cabinets Suspended Upper Cabinets Ceiling Service Panels Technical Data Index Kewaunee s Enterprise is a self-supporting moveable workstation table design. Enterprise is available with an above counter support structure, or as an adjustable height four legged table. Available pre-plumbed and pre-wired, this design easily incorporates with overhead carrier and panel systems. Worksurfaces are adjustable from sitting height to standing height, and overhead shelving is adjustable on 1" increments. Enterprise is designed for mobile, suspended, or floor mounted casework. Kewaunee s Enterprise provides a completely moveable laboratory casework system to meet the needs of a changing lab environment. EW-04/12r1-1
4 Single-sided Workstation 2" Post Enterprise Workstations Features: Self-supporting workstations Pre-plumbed integrated services May be used individually or in multi bench assemblies Adjustable height worksurfaces Integrated shelving systems Pre-wired integrated power and data UL certification available Multiple cabinet options including mobile, suspended, and floor mounted. EW-04/12r1-2
5 Double-sided Workstation 6" Post Features: Self-supporting workstations Pre-plumbed integrated services May be used individually or in multi bench assemblies Adjustable height worksurfaces Integrated shelving systems Pre-wired integrated power and data UL certification available Multiple cabinet options including mobile, suspended, and floor mounted. Double-sided - 6 Post Workstation not available in North America EW-04/12r1-3
6 Single-Sided Workstation Support Frames Single-sided Workstation Support Frames consist of two, 11 gauge, 2" diameter, powder coated steel, tubular posts with leveling feet. An Upper Spacer Bar and lower Power Bar, located " above the floor are securely fastened to the posts to form a rigid support frame. The upper portion of the frame is slotted on 1" centers to accept shelving. The lower section is bored and tapped Single Sided Workstation Support Frames for the attachment of the adjustable height Worksurface Frame. Workstation Support Frames 60" long and longer have an additional center post to add further support for the shelving assemblies. Single-sided Workstation Support Frame 42" Long FE30M " Long FE30M Single-sided Workstation Support Frame 60" Long FE30M " Long FE30M " Long FE30M EW-04/12r1-4
7 Single-Sided Support Frame Options Single-sided Workstation Support Frames will accept numerous service, electrical, and data/com options. Each post will accept up to three service fittings, pre-piped for easy connection to overhead services. The horizontal Power Bar will accept both electrical receptacles and data/com outlets, and may be pre-wired for overhead connections. Each post will also accept an optional electrical fixture below the worksurface. Workstation Support Frame Plumbing and Electrical Options Workstation Support Frame layout Technical Sheets on pages 44 and 45 may be used to specify services and options required. Add-on 3/8" IPS Flexible Hose available in reinforced PVC, polyurethane, or braided stainless steel Upper Spacer Bar Pre-piped 1/4" Tubing to top of post available in copper or stainless steel Pre-wired Pigtail to 3' or 6' above top of post available with 15 or 20 amp plugs Straight Blade or Twist-Lock Power Bar Data Outlet Double RJ45 Outlets Service Fittings Single outlet Ball Valve or Needle Cock (three fitting maximum) Power Bar Power Bar Electrical Receptacles 20 amp, 120 VAC, Specification Grade Standard or GFCI Left Post Note: 2" diameter posts with accept either electrical fixtures or service fittings, but not both. UL certification available on request. Right Post Electrical Receptacle 20 amp, 120 VAC, Specification Grade Standard or GFCI EW-04/12r1-5
8 Single-sided Support Frame Options Internal Service Tubes are required to mount services on the Workstation Support Frame. They are factory installed and consist of either copper or stainless steel 1 4" tubing with a female 3 8" IPS outlet escushion mounted in the 2" post and a female 3 8" IPS inlet at the top of the post. They are available in three lengths that correspond to the three mounting locations in the post. Ball Valves are chrome plated brass and provide on/off control of gas, air, or vacuum at pressures up to 75 PSI. Needle Point Cocks are chrome plated brass with a brass floating cone and integral brass seat. They provide metering control of laboratory gases at pressures up to 60 PSI. Internal Service Tubes Service Fittings Copper Tube for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Female Outlet Length Part Number 40" W Top Hole 44" W Middle Hole 48" W Bottom Hole Stainless Steel Tube for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Female Outlet Length Part Number 40" W Top Hole 44" W Middle Hole 48" W Bottom Hole Specify service fitting locations on Workstation Support Frame Layout Sheet Ball Valve 3/8" IPS Male Inlet Part Number W A W G W N W R W V W Service Air Gas Nitrogen Argon Vacuum Specify Needle Point Cock 3/8" IPS Male Inlet Part Number Service W A Air W G Gas W N Nitrogen W R Argon W V Vacuum W Specify Power Bar Electrical Fixtures Specify Power Bar Elecrtrical Fixture locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Rear Support Post Electrical Fixtures Specify Post Electrical Fixture locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Data/Com Outlet Part Number Device K Black RJ45 Duplex V Ivory RJ45 Duplex 120 VAC Outlet Part Number Device K Black 20 amp Duplex V Ivory 20 amp Duplex K Black 20 amp GFI Duplex V Ivory 20 amp GFI Duplex 120 VAC Outlet Part Number Device FE K Black 20 amp Duplex FE V Ivory 20 amp Duplex FE K Black 20 amp GFI Duplex FE V Ivory 20 amp GFI Duplex EW-04/12r1-6
9 Single-sided Support Frame Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame. They may be used with Keyed Quick-Connect Fittings or attached directly to the Internal Service Tubes. Hoses are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection and disconnection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being connected to the wrong service. Service Hoses Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Keyed Quick-Connect Fittings Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W Single-circuit 3-wire 120 VAC Length Part Number Plug 36" W A Straight Blade 72" W A Straight Blade 36" W A Twist-Lock 72" W A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36" W A Straight Blade 72" W A Straight Blade 36" W A Twist-Lock 72" W A Twist-Lock Specify Power Cord locations on Workstation Support Frame Layout Sheet (see page 44 and 45) Male Quick-Connect Fitting 3/8" IPS Male Outlet Part Number W-8111-K1 W-8111-K2 W-8111-K3 W-8111-K4 W-8111-K5 W-8111-K6 W-8111-K7 W-8111-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Female Quick-Connect Fitting 3/8" IPS Female Inlet Part Number W-9112-K1 W-9112-K2 W-9112-K3 W-9112-K4 W-9112-K5 W-9112-K6 W-9112-K7 W-9112-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium K2 Orange Air K3 Green Cold Water K4 Yellow Vacuum K5 Blue Gas K6 White K7 Purple Argon K8 Brown Nitrogen EW-04/12r1-7
10 Double-Sided Workstation Support Frames Double-sided Workstation Support Frames consist of two, 11 gauge, 2" x 6" oval, powder coated steel, tubular posts with leveling feet. An Upper Spacer Channel and lower Power Bar, located " above the floor are securely fastened to the posts to form a rigid support frame. The upper portion of the frame is slotted on 1" centers to accept shelving. The lower section of the frame is bored Double Sided Workstation Support Frames and tapped for the attachment of the adjustable height Worksurface Frame. Each 6" tubular post has a full-height removable access panel. Workstation Support Frames 60" long and longer have an additional center post to add further support for the shelving assemblies. Double-sided Workstation Support Frame 42" Long FE30M " Long FE30M Double-sided Workstation Support Frame 60" Long FE30M " Long FE30M " Long FE30M Double-sided - 6 Post Workstation not available in North America EW-04/12r1-8
11 Double-Sided Support Frame Options Double-sided Workstation Support Frames will accept numerous service, electrical, and data/com options. Each post will accept up to three service fittings, prepiped for easy connection to overhead services. They may be piped with hoses to the top of the frame, or with Extended Length hoses which extend 3 or 6 feet above the top of the frame. The horizontal Power Bar will accept both electrical receptacles and data/com outlets, and Workstation Support Frame Plumbing and Electrical Options may be pre-wired for overhead connections. Each post will also accept an optional electrical fixture below the worksurface. Workstation Support Frame layout Technical Sheets on pages 46 and 47 may be used to specify services and options required. Add-on 3/8" Flexible Hose available in reinforced PVC, polyurethane, or braided stainless steel Pre-piped 3/8" Flexible Tubing to top of post available in reinforced PVC or braided stainless steel Power Bar Data Outlet Double RJ45 Outlets Upper Spacer Channel Power Bar Extended Length Pre-piped 3/8" Flexible Tubing to 3' or 6' above top of leg available in reinforced PVC and braided stainless steel Pre-wired Pigtail to 3' or 6' above top of post available with 15 or 20 amp plugs Straight Blade or Twist-Lock Power Bar Electrical Receptacles 20 amp, 120 VAC, Specification Grade Standard or GFCI Service Fittings Double outlet Ball Valve or Needle Cock (three fitting maximum) Electrical Receptacle 20 amp, 120 VAC, Specification Grade Standard or GFCI (available on either post) Left Post UL certification available on request. Right Post Double-sided - 6 Post Workstation not available in North America EW-04/12r1-9
12 Double-sided Support Frame Options Internal Service Hoses are required to mount services on the Workstation Support Frame. They are factory installed when ordered with the service fitting and consist of either a reinforced PVC or braided stainless steel, 3 8" hose with a male 3 8" IPS outlet nipple and a female 3 8" IPS inlet at the top of the post. They are available in three lengths that correspond the three mounting locations in the post or in Extended Lengths, reaching 3' or 6' above the post top. Internal Service Hoses Service Fittings Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 40" W Top Hole 44" W Middle Hole 48" W Bottom Hole 84" W Extended Length 120" W Extended Length Double Ball Valves consist of a 90 wye turret with two chrome plated valves which provide on/off control of gas, air, or vacuum at pressures up to 75 PSI. Needle Point Cocks consist of a 90 wye turret with two chrome plated valves with a brass floating cone and integral brass seat. They provide metering control of laboratory gases at pressures up to 60 PSI. Double Ball Valve 3/8" IPS Female Inlet Part Number Service W A Air W G Gas W N Nitrogen W R Argon W V Vacuum W Specify Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 40" W Top Hole 44" W Middle Hole 48" W Bottom Hole 84" W Extended Length 120" W Extended Length Specify service fitting locations on Workstation Support Frame Layout Sheet Double Needle Point Cock 3/8" IPS Female Inlet Part Number Service W A Air W G Gas W N Nitrogen W R Argon W V Vacuum W Specify Power Bar Electrical Fixtures Specify Power Bar Elecrtrical Fixture locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Support Post Electrical Fixtures Specify Post Electrical Fixture locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Data/Com Outlet Part Number Device K Black RJ45 Duplex V Ivory RJ45 Duplex 120 VAC Outlet Part Number Device K Black 20 amp Duplex V Ivory 20 amp Duplex K Black 20 amp GFI Duplex V Ivory 20 amp GFI Duplex EW-04/12r VAC Outlet Part Number Device K Black 20 amp Duplex V Ivory 20 amp Duplex K Black 20 amp GFI Duplex V Ivory 20 amp GFI Duplex
13 Double-sided Support Frame Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame unless Extended Length Internal Service Hoses are used. They may be used with Keyed Quick-Connect Fittings or attached directly to the Internal Service Hoses. Hoses are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being switched. Service Hoses Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Keyed Quick-Connect Fittings Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W Single-circuit 3-wire 120 VAC Length Part Number Plug 36" W A Straight Blade 72" W A Straight Blade 36" W A Twist-Lock 72" W A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36" W A Straight Blade 72" W A Straight Blade 36" W A Twist-Lock 72" W A Twist-Lock Specify Power Cord locations on Workstation Support Frame Layout Sheet (see page 46 and 47) Male Quick-Connect Fitting 3/8" IPS Male Outlet Part Number W-8111-K1 W-8111-K2 W-8111-K3 W-8111-K4 W-8111-K5 W-8111-K6 W-8111-K7 W-8111-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Female Quick-Connect Fitting 3/8" IPS Female Inlet Part Number W-9112-K1 W-9112-K2 W-9112-K3 W-9112-K4 W-9112-K5 W-9112-K6 W-9112-K7 W-9112-K8 Key Color Black Orange Green Yellow Blue White Purple Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium K2 Orange Air K3 Green Cold Water K4 Yellow Vacuum K5 Blue Gas K6 White K7 Purple Argon K8 Brown Nitrogen EW-04/12r1-11
14 Worksurface Frames Worksurface Frames are available in five lengths to match the Workstation Support Frames, and are adjustable in height from 30" - 36" on 1" increments. The frames are fabricated from 11 gauge powder coated steel with 2" diameter, telescoping, powder coated, steel legs. They are furnished with required installation hardware. Enterprise Workstations 22" Deep Frames are designed for use with 24" deep Work Tops, 28" Deep Frames are designed for 30" deep Work Tops. Cabinet Stops are designed to locate Mobile Base Cabinets in line with the front of the Workstation. Fabricated from 16 gauge, powder coated, steel, they are furnished with all required installation hardware. Worksurface Frames 22" Deep Frame 42" L FE80M " L FE80M " L FE80M " L FE80M " L FE80M " Deep Frames 42" L FE80M " L FE80M " L FE80M " L FE80M " L FE80M Cabinet Stops Cabinet Stops for 22" Deep Frame 42" L FE85M " L FE85M " L FE85M " L FE85M " L FE85M Cabinet Stops for 28" Deep Frame 42" L FE85M " L FE85M " L FE85M " L FE85M " L FE85M EW-04/12r1-12
15 Free-standing Table Frames Free-standing Table Frames consist of a Worksurface Frame and a pair of Rear Adjustable Legs and are available in five lengths, and are adjustable in height from 30" - 36" on!" increments. The frames are fabricated from 11 gauge powder coated steel with 2" diameter, telescoping, powder coated, steel legs. Furnished with required installation hardware. Free-standing Tables Rear Adjustable Legs match the telescoping legs at the front of Worksurface Frames. They may be attached to any of the Worksurface Frames to create a Free-standing Table Frame. (sold in pairs) Cabinet Hanging Rail Kit may be added to the 28" deep Worksurface Frame to hang Suspended Base Cabinets. 22" Deep Table Frame Assemblies 42" L FE50M " L FE50M " L FE50M " L FE50M " L FE50M " Deep Deep Table Frame Assemblies 42" L FE50M " L FE50M " L FE50M " L FE50M " L FE50M Rear Adjustable Legs Cabinet Hanging Rail Kit for 28" deep frames 30" - 36"H FE88M pair 42" L FE89M " L FE89M " L FE89M " L FE89M " L FE89M For 28" Deep Worksurface Frames Only EW-04/12r1-13
16 Workstation Work Tops Workstation Work Tops are available in Kemresin, Phenolic Resin, or Plastic Laminate. All are 1" thick, have a front and rear overhang of 1" and are flush with the ends of the Worksurface Frames. Rear corners are notched to fit around Workstation Support Frames. All edges are finished. Enterprise Workstations Powder Coated Steel Back Splash is 5" high and mounted to the Worksurface frame to provide a 4" high splash. Fabricated from 11 gauge powder coated steel, it is furnished complete with installation hardware.available in Black only. Workstation Work Tops 24" Deep Work Top for use on 22" Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42" L FE95R Color Options FE95T FE95P " L FE95R BK = Black FE95T FE95P " L FE95R GR = Grey FE95T FE95P " L FE95R SL = Slate FE95T FE95P " L FE95R PT = Putty FE95T FE95P " Deep Work Top for use on 28" Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE95R Color Options FE95T FE95P L FE95R BK = Black FE95T FE95P L FE95R GR = Grey FE95T FE95P L FE95R SL = Slate FE95T FE95P L FE95R PT = Putty FE95T FE95P Black Powder Coated Steel Back Splash 42" L FE95M " L FE95M " L FE95M " L FE95M " L FE95M EW-04/12r1-14
17 Free-standing Table Work Tops Free-standanding Table Work Tops are available in Kemresin, Phenolic Resin, or Plastic Laminate. All are 1" thick, have a 1" front overhang, a 1" rear overhang, and are flush with the ends of the Worksurface Frames. All edges are finished. Powder Coated Steel Back Splash is 5" high and mounted to the Worksurface frame to provide a 4" high splash. Fabricated from 11 gauge powder coated steel, it is furnished complete with installation hardware. Available in Black only. Free-standing Table Work Tops 24 Deep Work Top for use on 22 Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE96R Color Options FE96T FE96P L FE96R BK = Black FE96T FE96P L FE96R GR = Grey FE96T FE96P L FE96R SL = Slate FE96T FE96P L FE96R PT = Putty FE96T FE96P Deep Work Top for use on 28 Worksurface Frames Kemresin Kemresin Black Phenolic Resin Black Plastic Laminate 42 L FE96R Color Options FE96T FE96P L FE96R BK = Black FE96T FE96P L FE96R GR = Grey FE96T FE96P L FE96R SL = Slate FE96T FE96P L FE96R PT = Putty FE96T FE96P Black Powder Coated Steel Back Spash 42" L FE96M " L FE96M " L FE96M " L FE96M " L FE96M EW-04/12r1-15
18 Enterprise Shelving Features: May be used with Workstation Support Frames or individual Wall Standards Shelving available in lengths of 29", 35", 40", 46" and 47" to match Workstation Support Frames Shelving available with or without front retaining rods Enterprise Workstations back edge of all shelves Task Lighting available for mounting under shelves Wall Standards available in heights of 30", 36", 42", 48" and 84" Shelf Retaining Lips available for front or EW-04/12r1-16
19 Wall Standards & Shelving Accessories Enterprise Wall Standards are fabricated from 11 gauge, 2" dia. powder coated steel tubing, with 1" steel stand offs for mounting on wall. Full height wall standard is furnished with leveling foot. All Enterprise Wall Standards are slotted on 1" centers and are designed to accept two shelf brackets mounted side by side. (Wall mounting hardware is not included.) Wall Standards Shelf Retaining Lips are fabricated from 16 ga. powder coated steel, and may be added to the front or back of any Enterprise Shelf. (required hardware included) Task Lighting consists of a thin-profile, specification grade, white, painted steel housing, 1" high by 3 1 2" housing. It is UL listed and furnished with rocker switch, single outlet, lamp, and six foot cord. Full Height Wall Standard 84" H FE10M each Shelf Retaining Lip Task Lighting Upper Wall Standards 30" L FE10M each 36" L FE10M each 42" L FE10M each 48" L FE10M each Nominal Length Part Number Fits 27" FE63M " Shelf each 33" FE63M " Shelf each 38" FE63M " Shelf each 44" FE63M " Shelf each 45" FE63M " Shelf each Nominal Actual Length Length Part Number Fits Under 24" " F " - 35" Shelves 36" " F " - 47" Shelves EW-04/12r1-17
20 Adjustable Height Shelves Adjustable Height Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Shelves are adjustable in height on 1" centers from 55" to 80" above floor. Shelves overhang the rear of the shelf bracket by 3" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Enterprise Workstations Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Adjustable Shelves 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 12" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " Deep Bracket 15" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " Deep Bracket 21" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W " L FE21M FE21T FE21W FE21W EW-04/12r1-18
21 Adjustable Height Shelves Adjustable Height Shelves with Retaining Rod consist of a pair of 11 gauge powder coated steel Shelf Brackets, a Shelf, and a 1 4" diameter powder coated steel rod fastened to the front ot the shelf brackets. Shelves are adjustable in height on 1" centers from 55" to 80" above floor. Shelves overhang the rear of the shelf bracket by 3" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Adjustable Shelves with Retaining Rod Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 12" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " Deep Bracket 15" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " Deep Bracket 21" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W " L FE22M FE22T FE22W FE22W EW-04/12r1-19
22 Top Shelves Single-sided Support Frame Top Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Top Shelves are designed to mount at the top of the support assembly but are adjustable in height on 1" centers from 60" to 84" above floor. Single-sided Support Frame Top Shelves overhang the rear of the shelf bracket by 2" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Enterprise Workstations Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Top Shelf Assembly for Single-sided Support Frames 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 11" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " Deep Bracket 14" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " Deep Bracket 20" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W EW-04/12r1-20
23 Top Shelves Double-sided Support Frame Top Shelves consist of a pair of 11 gauge powder coated steel Shelf Brackets and a Shelf. Top Shelves are designed to mount at the top of the support assembly but are adjustable in height on 1" centers from 60" to 84" above floor. Double-sided Support Frame Top Shelves overhang the rear of the shelf bracket by 1" and are available in Powder Coated Steel, Oak or Maple veneer plywood, or Phenolic Resin. Powder Coated Steel Shelves 1" thick, formed from 16 gauge cold rolled steel Oak or Maple Shelves 1" thick hardwood plywood with matching veneer on all exposed surfaces Black Phenolic Resin 1" thick phenolic resin Top Shelf Assembly for Double-sided Support Frames 40" Shelf used on 42" Support Frame 46" Shelf used on 48" Support Frame 29" Shelf used on 60" Support Frame 35" Shelf used on 72" Support Frame 47" Shelf used on 96" Support Frame 9" Deep Bracket 10" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " Deep Bracket 13" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " Deep Bracket 19" Deep Shelf Powder Coated Steel Black Phenolic Resin Oak Veneer Maple Veneer 40" L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W " L FE28M FE28T FE28W FE28W EW-04/12r1-21
24 Steel and Wood Cabinets Features: Steel Base Cabinets Electrostatically applied, chemical resistant, powder coat finish available in colors to compliment any laboratory environment. Heavy gauge formed and welded steel cabinet body construction provides strength and durability. One piece drawer body-bottom, back, sides and inner drawer head, radiused all four sides. One-piece case bottom and horizontal front rail Furnished standard with finished back Exclusive positive door catch Institutional type five-knuckle offset door hinges rated for 150 pound loads Enterprise Workstations Wood Base Cabinets Multiple coat, chemical resistant finish system formulated to highlight the natural grain patterns. Dovetailed drawer construction with nine-ply hardwood plywood drawer sides. 3/4" seven-ply hardwood plywood end panels, bottom and shelf, with solid hardwood facing. Full extention, ball bearing, 100lb. load rated, drawer slides, standard on all drawers and pullboards. 3/4" seven-ply hardwood plywood finished back dadoed into end panels and bottom. Institutional type five-knuckle offset door hinges rated for 150 pound loads EW-04/12r1-22
25 Base Cabinet Door & Drawer Styles Steel Style-01 Steel Style-11 Wood Style-1 Square Edge Multiple Pull Options Radius Lip, Semi-Overlay Construction Multiple Pull Options Inset Style Overlay Style Conventional Steel Style-02 Steel Style-12 Wood Style-3 Square Edge Recessed Aluminum Pull Radius Edge, Semi-Overlay Construction Integral Machined Pull Inset Style Overlay Style Silhouette Steel Style-14 Wood Style-5 Radius Top & Bottom Edge Multiple Pull Options Square Edge, Full Overlay Construction Multiple Pull Options Overlay Style Steel Style-15 Contemporary Radius Top & Bottom Edge Recessed Aluminum Pull Overlay Style Steel Style-16 Oak or Maple Door and Drawer Front Multiple Pull Options Overlay Style EW-04/12r1-23
26 Steel and Wood Cabinets Base Cabinet Catalog Number Explanation Cabinet Type B = Open Cupboard Cabinet C = All Cupboard Cabinet D = All Drawer Cabinet E = Drawer & Cupboard Cabinet G = Special Purpose Cabinet M = Mobile Cabinet Drawer and Door Configuration Cabinetry Material W = Wood M = Steel M25W Steel Furniture Style Hardware Material Selections M25M Door and Drawer Head Style 00 = No Option 01 = Inset Square Edge Steel Bail Type Pull 02 = Inset Square Edge Steel Recessed Pull 11 = Overlay Square Edge Steel Bail Type Pull 12 = Overlay Square Edge Steel Recessed Pull 14 = Overlay Rounded Edge Steel Bail Type Pull 15 = Overlay Rounded Edge Steel Recessed Pull 16 = Overlay Square Edge Wood Bail Type Pull Door and Drawer Head Material 0 = Steel 1 = Plain Sliced Red Oak 2 = Plain Sliced White Maple Available for Style 16 only Wood Furniture Style Hardware Material Selections Door and Drawer Head Style 0 = No Option 1 = Conventional Radius Lip 3 = Silhouette 5 = Contemporary Full Overlay Hinge Type 0 = Stainless Steel Five Knuckle 2 = Black Powder Coated Five Knuckle 3 = White Powder Coated Five Knuckle Enterprise Workstations Style-Hardware Material Selection See Below Special Configurations L = Left Hand Swing Cabinet Length (Nominal in Inches) Cabinet Depth (Nominal in Inches) Cabinet Height 19 = 19 1 /4" 20 = 19 5 /8" 25 = 25" 26 = /16" 27 = 26 3 /4" 33 = 33" M25W Maple exterior available for Style 1 and Style 5 only Pull Type 0 = No Option 1 = Rounded Aluminum 2 = Black Wire 3 = White Wire 4 = Stainless Steel Wire 6 = Chrome Plated Wire 8 = Square Aluminum Pull Type 0 = No Pull* 1 = Rounded Aluminum 2 = Black Wire 3 = White Wire 4 = Stainless Steel Wire 5 = Integral Machined 6 = Chrome Plated Wire 8 = Square Aluminum * pull holes bored on 4 centers but no pull provided Cabinet Exterior 1 = Plain Sliced Red Oak 2 = Plain Sliced White Maple EW-04/12r1-24
27 Base Cabinet Information 17u Drawer Code Door Code Base cabinets are designed on a unit system to allow maximum flexibility in the selection of drawer and/or cupboard door sizes. The charts below show both the actual height as well as the unit height of both Steel and Wood Base Cabinets The adjacent tables indicate the unit height, actual height and inside clearance dimensions of the base cabinets drawers and cupboards. Simply match the unit code shown on the cabinet to the appropriate code in the tables. Steel Cabinet Dimensions Descriptive Height Dimensional Height Unit Height Standing Mobile Sitting Mobile 25" High Suspended 19" High Suspended 33" 54 units " 41 units 25" 48 units " 36 units Wood Cabinet Dimensions Descriptive Height Dimensional Height Unit Height Standing Mobile Sitting Mobile 33" 22 units " 17 units 25" High Suspended " 20 units 19" High Suspended " 15 units Steel Drawer Size Codes Drawer Inside Dimensions Units Head Clear/ High Length Height Height (Front-to-Back) " " 18" " " 18" 9 4" 3." 18" " " 18" " " 18" " " 18" " " 18" " " 18" " " 18" " " 18" " Pullboard Steel Drawer Width I.D. (side-to-side) Base Number of Drawers Across Cabinet Length " " 18" " 21" " 24" " " 30" " " 36" " " " 42" " " 48" " " " Steel Cupboard Size Codes Inside Dimensions Units Door Height Depth High Height (Top-to-Bottom) (Front-to-Back) " " " " " " " " " " " " " 28" " Steel Cupboard Width I.D. (side-to-side) Base Number of Cupboards Across Cabinet Length " 12" 18" 15" 21" 18" 24" 21" 9" 30" 27" 12" 36" 33" 15" 9" 42" 39" 18" 48" 45" 21" 13" Wood Drawer Size Codes Drawer Inside Dimensions Units Head Clear/ High Length Height Height (Front-to-Back) 2 Pullboard 14" " 2 1 /8" 16 3 /4" /16" 3 3 /8" 16 3 /4" /16" 4 5 /8" 16 3 /4" /16" 5 7 /8" 16 3 /4" /16" 7 1 /8" 16 3 /4" /8" 8 3 /8" 16 3 /4" /8" 10 7 /8" 16 3 /4" /8" 13 1 /8" 16 3 /4" 1 /4" less if drawer is top drawer in cabinet Wood Drawer Width I.D. (side-to-side) Base Number of Drawers Across Cabinet Length " " 18" " 21" " 24" " 8 3 4" 30" " " 36" " " 8 3 4" 42" " " " 48" " " " Wood Cupboard Size Codes Inside Dimensions Units Opening Height Depth High Height (Top-to-Bottom) (Front-to-Back) /8" 14 3 /8" 19 1 /2" /8" 18 1 /8" 19 1 /2" /8" 19 3 /8" 19 1 /2" /8" 20 5 /8" 19 1 /2" /8" 21 7 /8" 19 1 /2" /4" 24 1 /4" 19 1 /2" /4" 26 3 /4" 19 1 /2" /4" 29 1 /4" 19 1 /2" Wood Cupboard Width I.D. (side-to-side) Base Number of Cupboards Across Cabinet Length " " 18" " 21" " 24" " " 30" " " 36" " " " 42" " " " 48" " " " The dimensions shown in these tables are minimums. They may be slightly larger on some cabinet types and/or styles. EW-04/12r1-25
28 Wood Sitting Height Mobile Cabinets 22" nominal L 26¾" These Mobile Cabinets are " high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Cupboard Cabinets Cupboard Cabinets with Pullboards 17u 17u 1 1 M10W272215L 15"L M10W272218L 18"L M10W272221L 21"L M10W272224L 24"L M10W "L M10W "L M10W "L M10W "L M15W272215L 15"L M15W272218L 18"L M15W272221L 21"L M15W272224L 24"L M15W "L M15W "L M15W "L M15W "L Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 3u 3u 12u 12u 12u 12u M20W272215L 15"L M20W272218L 18"L M20W272221L 21"L M20W272224L 24"L M20W "L M20W "L M20W "L M20W "L M25W272215L 15"L M25W272218L 18"L M25W272221L 21"L M25W272224L 24"L M25W "L M25W "L M25W "L M25W "L Drawer Cabinets Drawer Cabinets with Pullboards 6u 6u 3u 4u M30W "L M30W "L M30W "L M30W "L M40W "L M40W "L M40W "L M40W "L M35W "L M35W "L M35W "L M35W "L 7u 3u 4u 10u 10u 10u M60W "L M60W "L M60W "L M60W "L M62W "L M62W "L M62W "L M62W "L M65W "L M65W "L M65W "L M65W "L EW-04/12r1-26
29 Wood Standing Height Mobile Cabinets 22" nominal L 33" These Mobile Cabinets are 33" high and a nominal 22" deep. Lengths as shown. They are designed to fit under 36" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Cupboard Cabinets Cupboard Cabinets with Pullboards 22u 22u 20u 20u M10W332215L 15"L M10W332218L 18"L M10W332221L 21"L M10W332224L 24"L M10W "L M10W "L M10W "L M10W "L M15W332215L 15"L M15W332218L 18"L M15W332221L 21"L M15W332224L 24"L M15W "L M15W "L M15W "L M15W "L Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 17u 17u 1 1 M20W332215L 15"L M20W332218L 18"L M20W332221L 21"L M20W332224L 24"L M20W "L M20W "L M20W "L M20W "L M25W332215L 15"L M25W332218L 18"L M25W332221L 21"L M25W332224L 24"L M25W "L M25W "L M25W "L M25W "L Drawer Cabinets Drawer Cabinets with Pullboards 4u 4u 4u M50W "L M50W "L M50W "L M50W "L M45W "L M45W "L M45W "L M45W "L 6u 6u 4u 4u 4u 10u 10u 10u 10u 10u M62W "L M62W "L M62W "L M62W "L M63W "L M63W "L M63W "L M63W "L M75W "L M75W "L M75W "L M75W "L M67W "L M67W "L M67W "L M67W "L EW-04/12r1-27
30 Steel Sitting Height Mobile Cabinets 23" L 26¾" These Mobile Cabinets are " high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Enterprise Workstations Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Drawer/Cupboard Cabinets Drawer/Cupboard Cabinets with Pullboards 9u 9u 6u 6u 32u 32u 32u 32u M20M272215L 15"L M20M272218L 18"L M20M272221L 21"L M20M272224L 24"L M20M "L M20M "L M20M "L M20M "L M25M272215L 15"L M25M272218L 18"L M25M272221L 21"L M25M272224L 24"L M25M "L M25M "L M25M "L M25M "L Drawer Cabinets Drawer Cabinets with Pullboards 10u 1 16u 8u 1 1 M30M "L M30M "L M30M "L M30M "L M35M "L M35M "L M35M "L M35M "L M36M "L M36M "L M36M "L M36M "L 8u 10u 10u 10u M45M "L M45M "L M45M "L M45M "L 8u 9u 6u 8u 24u 24u M62M "L M62M "L M62M "L M62M "L M67M "L M67M "L M67M "L M67M "L EW-04/12r1-28
31 Steel Standing Height Mobile Cabinets 23" L 33" Cupboard Cabinets These Mobile Cabinets are " high and a nominal 22" deep. Lengths as shown. They are designed to fit under 30" high Worksurface Frames. Drawer cabinets are furnished with counter weights, multiple-drawer cabinets include an interlock system. All mobile cabinets have finished backs. Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. 54u 54u M10M332215L 15"L M10M332218L 18"L M10M332221L 21"L M10M332224L 24"L M10M "L M10M "L M10M "L M10M "L Drawer/Cupboard Cabinets with Pullboards 6u 6u 4 4 M25M332215L 15"L M25M332218L 18"L M25M332221L 21"L M25M332224L 24"L Drawer Cabinets Drawer Cabinets with Pullboards M25M "L M25M "L M25M "L M25M "L 9u u 12u 12u 1 6u M40M "L M40M "L M40M "L M40M "L M45M "L M45M "L M45M "L M45M "L M46M "L M46M "L M46M "L M46M "L 6u 24u 12u 1 24u 24u M71M "L M71M "L M71M "L M71M "L M67M "L M67M "L M67M "L M67M "L EW-04/12r1-29
32 Add-A-Drawer Mobile Cabinets Add-A-Drawer Mobile Cabinets allow the removal of the top drawer assembly to convert the cabinet from standing height to sitting height. The base section of the Add A Drawer Cabinet is " high, the add-on drawer 6 1 4", for an overall height of 33". All Add-A-Drawer mobile cabinets have finished backs and counter-weights. The M95 four-drawer cabinet incorporates a drawer interlock system on the bottom three drawers. The cabinets are a nominal 22" deep with lengths as shown. They are designed to fit under 30" and 36" high Worksurface Frames. Cupboards have one adjustable shelf. Enterprise Workstations Note: Last four digits of part number designates door and drawer head style, hinge, hardwood species, and pull selection. See page 24 for full explanation. Actual product may vary slightly from catalog illustration due to style and hardware selection. Wood Add-A-Drawer Mobile Cabinets Drawer/Cupboard Cabinets M90W332215L 15"L M90W332218L 18"L M90W332221L 21"L M90W332224L 24"L Drawer Cabinets M90W "L M90W "L M90W "L M90W "L M95W "L M95W "L M95W "L M95W "L EW-04/12r1-30
33 Mobile Cabinet Tops & Accessories 1" Thick Mobile Cabinet Tops are available in three depths, 22",23", or 24" and may be used on either Wood or Steel Mobile Cabinets. All edges are finished. Steel Mobile Cabinet Tops are fabricated from 18 gauge steel and finished to match the cabinet. They are designed for Steel Mobile Cabinets only and add less than 1/4" to the overall height of the cabinet. Mobile Cabinet Grabbar allows easier movement and relocation of mobile cabinets. Fabricated from Steel Mobile Cabinet Top for Steel Mobile Cabinets only top 22 7 /8"deep Length Painted Steel 15" F94M " F94M " F94M " F94M powder coated steel or stainless steel, they may be used on either Steel or Wood Mobile Cabinets, with or without Tops. Bars must be attached in field with supplied screws and/or bolts. 1" Thick Mobile Cabinet Top 22" Deep flush to front of case Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R BK = Black F94T F94P " F94R GR = Grey F94T F94P " F94R PT = Putty F94T F94P " F94R SL = Slate F94T F94P " Deep flush to overlay door/drawer fronts - 1" overhange of case Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R BK = Black F94T F94P " F94R GR = Grey F94T F94P " F94R PT = Putty F94T F94P " F94R SL = Slate F94T F94P " Deep 1" overhange of overlay door/drawer fronts Kemresin Black Black Length Kemresin Color Options Phenolic Resin Plastic Laminate 15" F94R BK = Black F94T F94P " F94R GR = Grey F94T F94P " F94R PT = Putty F94T F94P " F94R SL = Slate F94T F94P Mobile Cabinet Grabbar Length Painted Steel Stainless Steel 15" F73M F73S " F73M F73S " F73M F73S " F73M F73S EW-04/12r1-31
34 Suspended Base Cabinets 19" High 22" nominal L 191/" 4 Steel 5 19 /"Wood 8 Cupboard Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 19" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 36u Steel Cabinet Length Wood Cabinet C03M192215L 15" C03W202215L C03M192218L 18" C03W202218L C03M192221L 21" C03W202221L C03M192224L 24" C03W202224L 1 36u Steel Cabinet Length Wood Cabinet C03M " C03W C03M " C03W C03M " C03W C03M " C03W Drawer Base Cabinets 18u 18u Steel Cabinet Length Wood Cabinet D00M " D00W _0 D00M " D00W _0 D00M " D00W _0 D00M " D00W _0 7u 8u 9u 9u 9u 9u Steel Cabinet Length Wood Cabinet D30M " D30W _0 D30M " D30W _0 D30M " D30W _0 D30M " D30W _0 3u 4u 4u 4u 12u 12u 12u Steel Cabinet Length Wood Cabinet D50M " D50W _0 D50M " D50W _0 D50M " D50W _0 D50M " D50W _0 EW-04/12r1-32
35 Suspended Base Cabinets 19" High 22" nominal L 191/" 4 Steel 5 19 /"Wood 8 Drawer Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 19" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 12u 24u 1 File Drawer with hangers Steel Cabinet Length Wood Cabinet D81M " D81W _0 D81M " D81W _0 D81M " D81W _0 D81M " D81W _0 10u 1 File Drawer with hangers 9u 24u Steel Cabinet Length Wood Cabinet D85M " D85W _0 D85M " D85W _0 D85M " D85W _0 D85M " D85W _0 3u 10u 8u 12u 16u Steel Cabinet Length Wood Cabinet D86M " D86W _0 D86M " D86W _0 D86M " D86W _0 D86M " D86W _0 3u 7u EW-04/12r1-33
36 Suspended Base Cabinets 25" High 22" nominal L 25" Steel 2515/ 16 "Wood Cupboard Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 25" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 48u Steel Cabinet Length Wood Cabinet C03M252215L 15" C03W262215L_0 C03M252218L 18" C03W262218L_0 C03M252221L 21" C03W262221L_0 C03M252224L 24" C03W262224L_0 20u 48u Steel Cabinet Length Wood Cabinet C03M " C03W _0 C03M " C03W _0 C03M " C03W _0 C03M " C03W _0 20u Drawer Base Cabinets 16u 16u 16u Steel Cabinet Length Wood Cabinet D00M " D00W _0 D00M " D00W _0 D00M " D00W _0 D00M " D00W _0 6u 7u 7u 8u 8u 16u 16u Steel Cabinet Length Wood Cabinet D08M " D08W _0 D08M " D08W _0 D08M " D08W _0 D08M " D08W _0 3u 3u 7u 7u 8u 8u 8u 8u 16u Steel Cabinet Length Wood Cabinet D10M " D10W _0 D10M " D10W _0 D10M " D10W _0 D10M " D10W _0 3u 3u 3u 4u 7u EW-04/12r1-34
37 Suspended Base Cabinets 25" High 22" nominal L 25" Steel 2515/ 16 "Wood Drawer Base Cabinets Suspended Base Cabinets are designed to hang beneath 28" deep Worksurface or Table Frames. They are available in either steel or wood construction and require a Cabinet Hangling Rail Kit (see page 13) be added to the frame for attachment. Cabinets on this page are a nominal 25" high, and are available in lengths shown. See page 24 for designating cabinet style, door and drawer head material, and hardware selection. 12u 12u 12u 12u Steel Cabinet Length Wood Cabinet D30M " D30W _0 D30M " D30W _0 D30M " D30W _0 D30M " D30W _0 24u 24u 2 File Drawers with hangers Steel Cabinet Length Wood Cabinet D81M252215L 15" D81W _0 D81M252218L 18" D81W _0 D81M252221L 21" D81W _0 D81M252224L 24" D81W _0 10u 10u 2 File Drawers with hangers 12u 12u Steel Cabinet Length Wood Cabinet D85M " D85W _0 D85M " D85W _0 D85M " D85W _0 D85M " D85W _0 24u 10u 1 File Drawer with hangers 1 File Drawer with hangers Drawer & Cupboard Base Cabinets 12u 36u Steel Cabinet Length Wood Cabinet E40M252215L 15" E40W262215L E40M252218L 18" E40W262218L E40M252221L 21" E40W262221L E40M252224L 24" E40W262224L 1 12u 36u Steel Cabinet Length Wood Cabinet E40M " E40W E40M " E40W E40M " E40W E40M " E40W EW-04/12r1-35
38 Upper Storage Cabinets Upper Cabinet Hanging System Enterprise Workstations With the use of an Upper Hanging Bracket and a pair of Hanging Rails, Kewaunee s standard Wall Cabinets can be mounted on the Enterprise Workstation Support Frame. Two Hanging Rails are snapped into the Support Frame slots. The Upper Hanging Bracket bolts to the top of the upper cabinet which then hangs on the upper Hanging Rail. The lower Hanging Rail allows the bottom of the cabinet to be securely fastened to the module. Hanging Rails and Upper Hanging Brackets, are finished to match the Workstation Support Frame and are furnished with all required hardware. Hanging Rails are furnished in pairs. Order the Upper Hanging Bracket in the same length as the Upper Cabinet. The Hanging Rails must be the same length as the Workstation Support Frame. Recommended for use with Double-sided Support Fames, and Single-sided Support Frames installed against a wall. Upper Hanging Bracket Part Number Length FE48M " FE48M " FE48M " FE48M " FE48M " FE48M " Hanging Rails Part Number Length FE49M " 1 pair FE49M " 1 pair FE49M pair FE49M pair FE49M " 1 pair Sliding Plate Glass Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth " W10M " W10W _0 12" " W10M " W10W _0 12" " W10M " W10W _0 12" " W10M " W10W _0 12" 16" W10M " W10W _0 16" 16" W10M " W10W _0 16" 16" W10M " W10W _0 16" 16" W10M " W10W _0 16" EW-04/12r1-36
39 Upper Cabinets 30" High These Upper Cabinets are 30" high and available in two depths. Lengths as shown. They are provided with two adjustable shelves, and are available in either wood or steel. Hanging system must be ordered separately. D Sliding Base Glazed Cabinets Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth " W11M " W11W _0 12" " W11M " W11W _0 12" " W11M " W11W _0 12" " W11M " W11W _0 12" 16" W11M " W11W _0 16" 16" W11M " W11W _0 16" 16" W11M " W11W _0 16" 16" W11M " W11W _0 16" D Sliding Base Panel Cabinets Door Cabinets Depth Steel Cabinet Length Wood Cabinet Depth " W12M " W12W _0 12" " W12M " W12W _0 12" " W12M " W12W _0 12" " W12M " W12W _0 12" 16" W12M " W12W _0 16" 16" W12M " W12W _0 16" 16" W12M " W12W _0 16" 16" W12M " W12W _0 16" Sliding Glazed and Panel Doors are suspended by roller from a track at the top of the cabinet. See page 24 for designating cabinet door style, door and cabinet material, and pull and hinge selection. Swinging Glazed Door Cabinets Left Hand Nominal Depth Steel Cabinet Length Wood Cabinet Depth " W20M301318L 18" W20W301218L " " W20M301324L 24" W20W301224L " 16" W20M301618L 18" W20W301618L " 16" W20M301624L 24" W20W301624L " Right Hand Nominal Depth Steel Cabinet Length Wood Cabinet Depth " W20M " W20W " " W20M " W20W " 16" W20M " W20W " 16" W20M " W20W " Nominal Depth Steel Cabinet Length Wood Cabinet Depth " W20M " W20W " " W20M " W20W " " W20M " W20W " " W20M " W20W " 16" W20M " W20W " 16" W20M " W20W " 16" W20M " W20W " 16" W20M " W20W " EW-04/12r1-37
40 Ceiling Service Panel Features: Designed to integrate into common ceiling grids for delivering plumbing, electrical, and data services to the lab bench Fits in standard 2' x 2' and 2' x 4' ceiling grids Power components are UL listed. Available in all standard powder coat finish colors May be customized to meet your project requirements Enterprise Workstations Accommodates multiple lab services including: Common gases, air, vacuum, and water High purity and special gases Power and data Accepts multiple fitting options including: Standard or fine control valves Pressure gauges and regulators Quick-connect valves Quick-connect fittings and hoses Communication and data outlets Electrical service outlets EW-04/12r1-38
41 Ceiling Service Panel Typical Ceiling Panel Layouts Six Station 2' x 4' panel Six groups of 4 service cutouts Six duplex receptacles cutouts Four data outlet cutouts Four Station 2' x 2' panel Four groups of 4 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Four Station 2' x 4' panel Four groups of 6 service cutouts Four duplex receptacles cutouts Four data outlet cutouts Four Station 2' x 2' panel Four groups of 3 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Four Station 2' x 4' panel Four groups of 4 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 2' panel Two groups of 6 service cutouts Four duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 4' panel Two groups of 6 service cutouts Four duplex receptacles cutouts Four data outlet cutouts Two Station 2' x 2' panel Two groups of 4 service cutouts Two duplex receptacles cutouts Two data outlet cutouts Two Station 2' x 4' panel Two groups of 4 service cutouts Two duplex recepticle cutouts Two data outlet cutouts One Station 2' x 2' panel One group of 6 service cutouts One duplex receptacle cutout One data outlet cutout EW-04/12r1-39
42 Ceiling Service Panel and Accessories Ceiling Service Panels are fabricated from powder coat 18 gauge steel in two sizes to fit standard ceiling grid. They can be punched to accept most electrical, data, or service fittings. (see pages 48 and 49 for Ceiling Service Panel Layout Sheets) Fittings and Fixtures must be ordered separately Electrical Fixtures are furnished complete with device, box and cover plate and are supplied loose, uninstalled. 24" x 24" Ceiling Service Panel 24" x 48" Ceiling Service Panel Part Number Dimensions (HxDxL) SC10M " x 24" x 24" Part Number Dimensions (HxDxL) SC10M " x 24" x 48" Electrical Fixtures Straight Blade K Black V Ivory 120 volt AC, specification grade, 20 amp, single duplex, receptacle. Straight Blade GFCI K Black V Ivory 120 Volt GFCI specification grade, 20 amp, ground fault protected, single duplex receptacle. Note: One ground fault interrupter will protect all outlets on the same circuit. Twist-Lock 20 amp K Black 120 volt AC, specification grade, 20 amp, single receptacle. Data/Comm Outlet K Black V Ivory (2) RJ45 Outlets. Fits in 1 1 4" x 2" cutout. Dual-circuit Straight Blade 20 amp K Black NEMA wire, specification grade receptacle. Capable of carrying two 120 VAC, 20 amp circuits. Note: Check local electrical codes for compliance. Dual-circuit Twist-Lock 20 amp K Black NEMA L wire, specification grade receptacle. Capable of carrying two 120 VAC, 20 amp circuits. Note: Check local electrical codes for compliance. EW-04/12r1-40
43 Ceiling Service Panel Accessories Service Hoses are required to carry services from overhead service carriers to the top of the Support Frame. They are available in reinforced PVC, polyurethane, or braided stainless steel. Power Cords are required to carry electrical power from the overhead service carriers to the top of the Support Frame. The SJ 12/3 cord is available in various configurations. Service Hoses Keyed Quick-Connect Fittings are available for Hoses and Internal Service Tubes to ease service connection and disconnection during bench relocation. They are available in eight sizes (keys) which keeps service outlets from being connected to the wrong service. Power Cords Reinforced PVC Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Braided Stainless Steel Hose for Natural & Reactive Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 36" W " W Coiled Polyurethane Hose for Non-burning Gases 3/8" IPS Female Inlet 3/8" IPS Male Outlet Length Part Number 72" W Single-circuit 3-wire 120 VAC Length Part Number Plug 36 W A Straight Blade 72 W A Straight Blade 36 W A Twist-Lock 72 W A Twist-Lock Dual-circuit 4-wire 120 VAC Length Part Number Plug 36 W A Straight Blade 72 W A Straight Blade 36 W A Twist-Lock 72 W A Twist-Lock Keyed Quick-Connect Fittings Male Quick-Connect Fitting 3/8" IPS Male Outlet Key Part Number Color W-8111-K1 Black W-8111-K2 Orange W-8111-K3 Green W-8111-K4 Yellow W-8111-K5 Blue W-8111-K6 White W-8111-K7 Purple W-8111-K8 Brown Female Panel Mount Quick-Connect Fitting 3/8" IPS Male Inlet Key Part Number Color W-9122-K1 Black W-9122-K2 Orange W-9122-K3 Green W-9122-K4 Yellow W-9122-K5 Blue W-9122-K6 White W-9122-K7 Purple W-9122-K8 Brown Key Number and Color Code Standard Service Female Body Sleeve Dia. Male Body Sleeve Dia. in. mm in mm K1 Black Helium K2 Orange Air K3 Green Cold Water K4 Yellow Vacuum K5 Blue Gas K6 White K7 Purple Argon K8 Brown Nitrogen EW-04/12r1-41
44 Enterprise Technical Data Enterprise Workstations Single-sided Workstation Support Frame & Worksurface Frame Dimensions 1" 2" 9" 5" 6" 30" maximum 12" 7" Shelves not shown for clearity 18" 83" 84" 1" 4/" "-36" 1" 2" 18"-24" 2" 1" 22"-28" 1" 24"-30" Front Elevation End Elevation Double-sided Workstation Support Frame & Worksurface Frame Dimensions 4" 5" 9" 9" 6" 30" maximum 12" 12" 7" Shelves not shown for clearity 18" 18" 1" 1" 4/" "-36" 29"-36" Front Elevation 2" 1" 18"-24" 21"-27" 24"-30" 6" 4" 48"-60" 18"-24" 21"-27" 24"-30" End Elevation 2" 1" EW-04/12r1-42
45 Enterprise Technical Data Free-standing Table 1" 1" 1/" 1 2 4/" "-36" 29"-36" 2" 2" 42" - 48" - 60" - 72" - 96" Front Elevation Single-sided Top Shelf Double-sided Top Shelf 20" 19" 19" 2" 18"-24" 2" 22"-28" 1" 24"-30" End Elevation 7" 18" 7" 18" 14" 13" 13" 6" 12" 6" 12" 11" 5" 5" 9" 10" 10" 9" End Elevation Wall Standard Grounding Details End Elevation Recommended Grounding Locations EW-04/12r1-43
46 Enterprise Technical Data Enterprise Workstation Support Frame Single-sided, 2 inch Tube Frame Note: Left Upright will accept either electrical fixtures or service fittings but not both. Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required Left Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 Enterprise Workstations FE30M8402XX-00 Note: Right Upright will accept either electrical fixtures or service fittings but not both. Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Power Bar Receptacles (see options below) indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W Ball Valve W Needle Point Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 42" 48" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Two (2) 120 VAC, 20 amp, Duplex Two (2) 120 VAC, 20 amp, GFI, Duplex None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X to project) LENGTH FE30M PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-44
47 Enterprise Technical Data Enterprise Workstation Support Frame Single-sided, 2 inch Tube Frame Note: Left Upright will accept either electrical fixtures or service fittings but not both. Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required Data Option Left Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 FE30M8402XX-00 Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 6ft pigtail 3ft pigtail Cat-6 Cat-5e Note: Right Upright will accept either electrical fixtures or service fittings but not both. Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Power Bar (see options below) indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W Ball Cock W Needle Point Service Fittings Ball Cock W Needle Point W Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 60" 72" 96" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Four (4) 120 VAC, 20 amp, Duplex Four (4) 120 VAC, 20 amp, GFI, Duplex None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X to project) LENGTH FE30M PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-45
48 Enterprise Technical Data Enterprise Workstation Support Frame Double-sided, 6 inch Tube Frame Enterprise Workstations FE30M8406XX-00 Services on Left Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Left Data Option Right Data Port on Power Bar RJ45 Duplex Standard cutout only - 1¼" x 2" Data Port Wiring no wiring 3ft pigtail 6ft pigtail Cat-5e Cat-6 (data port on both front & back) Power Bar Receptacles (back same as front) (see options below) Services on Right Upright Pre-piped to top of upright (see below for Piping Options) Indicate services required indicate service required indicate service required indicate service required Electric on Left Upright Pre-wired as selected below Service Fittings W Ball Cock W Needle Point Electric on Right Upright Pre-wired as selected below Indicate outlet device type Indicate outlet device type 120VAC Duplex 120VAC GFI Duplex Electrical Devices Color both power & data devices Black Ivory 120VAC Duplex 120VAC GFI Duplex Length: (pick one only) 42" 48" Power Options: (indicate options required) Power Bar Receptacles (pick one only) Two (2) 120 VAC, 20 amp, Duplex (each side) Two (2) 120 VAC, 20 amp, GFI, Duplex (each side) None Power Bar/Upright Electric Wiring ( pick one only) 3ft 6ft Single Circuit pigtail, straight-blade plug 3ft 6ft Single Circuit pigtail, twist-lock plug 3ft 6ft Double Circuit pigtail, straight-blade plug 3ft 6ft Double Circuit pigtail, twist-lock plug None Electrical Pigtail Location (pick one only) Top of Left Upright Top of Right Upright N/A Piping Options: (indicate options required) Piping Option (pick one only) Pipe to top of upright Pipe to top of upright with extra 3ft of hose Pipe to top of upright with extra 6ft of hose Specify Extension Hoses Separately Piping/Hose End Option (pick one only) 3/8" IPS Threaded Female (standard) 1/4" Tube 3/8" IPS Threaded Male Keyed Male Quick-Connect Fitting Certification Options: UL Options (pick one only) No UL Listing (standard) UL Listed (add part no. X to project) LENGTH FE30M PROJECT NAME: COLOR ITEM NO. QUANTITY EW-04/12-46
49 Enterprise Technical Data EW-04/12-47
50 Enterprise Technical Data Enterprise Workstations EW-04/12-48
51 Enterprise Technical Data EW-04/12-49
52 Alphabetical Index Enterprise Workstations Part Description Page Part Description Page Cabinets Dimensions Door & Drawer Styles Part Number Explanations Upper Storage Cabinets Rear Adjustable Legs Service Fittings.... 6,10,40 Quick-connect Fittings.... 7,11,41 Service Hoses... 7,11,41 Service Tubes... 6 Electrical Fixtures 120 VAC Receptacle... 6,10,40 Data/Com Receptacle... 6,10,40 GFCI Receptacle... 6,10,40 Power Bar... 6,10 Power Cord... 7,11,41 Service Panel Fixtures Twist-Lock Receptacle Workstation Frame Leg... 6,10 Free-standing Table Back Splash Rear Adjustable Legs Table Frame Table Work Top Mobile Cabinets Add-A-Drawer Steel Sitting Height Steel Standing Height Wood Sitting Height Wood Standing Height Mobile Cabinet Grab Bar Mobile Cabinet Tops Service Panel Shelving Adjustable Shelf Assembly Retaining Lip Task Lighting Top Shelf Assembly Wall Standards Suspended Cabinets " High " High Upper Storage Hanging System Hanging Bracket Hanging Rails Cabinets Workstation Support Frame Single-sided Double-sided... 8 Workstation Work Top Worksurface Frame Cabinet Stop Frames EW-04/12r1-50
53 Numerical Index Part Number Page Part Number Page Part Number Page K V K K K V K V C03M C03M C03M192215L C03M192224L...32 C03M C03M C03M252215L C03M252224L...34 C03W C03W C03W202215L C03W202224L...32 C03W C03W C03W262215L C03W262224L...34 D00M D00M D00M D00M D00W D00W D00W D00W D08M D08M D08W D08W D10M D10M D10W D10W D30M D30M D30M D30M D30W D30W D30W D30W D50M D50M D50W D50W D81M D81M D81M D81M D81W D81W D81W D81W D85M D85M D85M D85M D85W D85W D85W D85W D86M D86M D86W D86W E40M E40M E40M252215L E40M252224L...35 E40W E40W E40W262215L E40W262224L...35 F F F73M F73S F94M F94M F94P F94P F94P F94P F94P F94P F94R F94R F94R F94R F94R F94R F94T F94T F94T F94T F94T F94T FE10M FE10M FE21R FE21R FE21T FE21T FE21W FE21W FE22R FE22R FE22T FE22T FE22W FE22W FE K FE V...6 FE K FE V...6 FE28R FE28R FE28R FE28R FE28T FE28T FE28T FE28T FE28W FE28W FE28W FE28W FE30M FE30M FE30M FE30M FE48M FE48M FE49M FE49M FE50M FE50M FE63M FE63M FE80M FE80M FE85M FE85M FE88M FE89M FE89M FE95M FE95M FE95P FE95P FE95R FE95R FE95T FE95T FE96M FE96M FE96P FE96P FE96R FE96R FE96T FE96T M10M M10W M10M332215L M10W332224L...29 M10W M10W M10W272215L M10W272224L...26 M10W M10W M10W332215L M10W332224L...27 M15W M15W M15W272215L M15W272224L...26 M15W M15W M15W332215L M15W332224L...27 M20M M20M M20M272215L M20M272224L...28 M20W M20W M20W272215L M20W272224L...26 M20W M20W M20W332215L M20W332224L...27 M25M M25M M25M272215L M25M272224L...28 M25M M25W M25M332215L M25W332224L...29 M25W M25W M25W272215L M25W272224L...26 M25W M25W M25W332215L M25W332224L...27 M30M M30M M30W M30W M35M M35M M35W M35W M36M M36M M40M M40W M40W M40W M45M M45M M45M M45W M45W M45W M46M M46W M50W M50W M60W M60W M62M M62M M62W M62W M62W M62W M63W M63W M65W M65W M67M M67M M67M M67W M67W M67W M71M M71W M75W M75W SC10M SC10M W A W W A W W A W W10M W10M W10W W10W W W W W W12M W12M W12W W12W W W20M W20M W20M301318L W20M301624L...37 W20M W20M W20W W20W W20W301318L W20W301624L...37 W20W W20W W W W W W W W W W W W-8111-K1 W-8111-K W-9112-K1 W-9112-K W-9122-K1 W-9122-K EW-04/12r1-51
54 EW-04/12r1-52
Enterprise ADAPTABLE. KEWAUNEE encouraging new discovery MOVEABLE WORKSTATIONS
Enterprise ADAPTABLE MOVEABLE WORKSTATIONS KEWAUNEE encouraging new discovery Freestanding Tables Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving
More informationMoveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide
Enterprise Moveable Workstations KEWAUNEE encouraging new discovery...worldwide Movable Workstations Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving
More informationSymphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
More informationSitting Height Base Cabinets
Sitting Height Base Cabinets Signature Series 30" These Sitting Height Cabinets are 30" high and a deep. engths as shown. Open and Cupboard cabinets have one adjustable shelf. Open Cubbie cabinets have
More informationSignature Series WOOD KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
WOOD LABORATORY FURNITURE KEWAUNEE encouraging new discovery KEWAUNEE Setting the standard for quality laboratory furniture, fume hoods, and project performance since 1906. Every Kewaunee project begins
More informationLABORATORY SPECIFICATION SHEET
ELECTRIC HEIGHT ADJUSTABLE LAB WORKSTATION LPC3060-FH30K-WP023060LN LPC3060-FI30K-WP023060LN LPC3072-FH30K-WP023072LN LPC3072-FI30K-WP023072LN LPC3060-FH30K-WP023060ES LPC3060-FI30K-WP023060ES LPC3072-FH30K-WP023072ES
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationSteel Laboratory Furniture. Research Collection KEWAUNEE. encouraging new discovery...worldwide
Research Collection Steel Laboratory Furniture KEWAUNEE encouraging new discovery...worldwide RESEARCH COLLE Steel Furniture Fully-welded, heavygauge steel constuction Constructed to meet SEFA standards
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationSteel Standing Height Base Cabinets
Steel Standing Height Base Cabinets Research Collection Standing Height Cabinets are high and 22" deep. Lengths as shown. Open and Cupboard Cabinets are furnished with one adjustable shelf. Open Cabinets
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationSteel Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Each cabinet is fabricated from prime quality furniture grade cold rolled type 304-4 316-4 stainless steel. All components are die fmed, notched, keyed and
More informationSECTION LABORATORY CASEWORK AND EQUIPMENT
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 12 35 53 LABORATORY CASEWORK AND EQUIPMENT A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More informationULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
More informationInspiring progress. Hamilton Scientific Distinction Laboratory Bench System Specification Catalog
Inspiring progress. Hamilton Scientific Distinction Laboratory Bench System Specification Catalog Inspiring progress. Hamilton Scientific Distinction Laboratory Bench System Specification Catalog Hamilton
More informationWood Casework Construction Details
CASEWORK CONSTRUCTION DETAILS Overview Cabinets Mott casewk can meet the most demanding specification, whether it is AWI Premium an architect's 'signature' specification. We manufacture using premium grade
More informationPivot-Door Downdraft Cabinet Plans
Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router
More informationKindly review the following and contact us with any questions or for further details.
Capabilities include but not limited to: Standard Catalog Items Lab cabinets/lab furniture - Powder coated steel cabinets Exhaust Fume Hoods Work benches Tables Server Racks Counter tops Chairs/stools
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationVWR LABORATORY BENCHES. Ergonomic, Flexible Lab System for Today s Modern Laboratories
VWR LABORATORY BENCHES Ergonomic, Flexible Lab System for Today s Modern Laboratories VWR LAB BENCHES VWR lab benches are ergonomically designed to meet the needs of laboratory personnel. There are many
More informationTitan Series Systems
Titan Series Systems Since 1995 - Celebrating 20 Years of Professional Service Proudly made in USA for Lab Furniture by A Division of LFFH, Inc. Lab Furniture & Fume Hoods 2385 South Norton 179th Center
More informationFamily and Consumer Sciences
Family and Consumer Sciences Furnishings for: Family & Consumer Science Science Art Music Sheldon represents the ultimate in flexibility, durability, and the maximum useful product life. Sheldon cabinet
More informationVWR LABORATORY BENCHES
VWR LABORATORY BENCHES Ergonomic, Flexible Lab System for Today s Modern Laboratories Your first choice for spectrophotometry VWR LAB BENCHES VWR LABORATORY BENCHES VWR Lab Benches are ergonomically designed
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationOpus Cabinets with "H Storage Unit, continued
66 Health Volume 2 Casegoods Specification Guide Fascia is used to extend cabinets to the ceiling Fascia can only be used on 84"H cabinets Fascia accommodates ceiling heights of 7'6" 9'6" in 1 16" increments
More informationSECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK
More informationAn Introduction to Hann Manufacturing
An Introduction to Hann Manufacturing science art drafting storage workbenches PO Box 400 Malta, OH 43758 Phone: 740.962.4885 Fax: 740.962.4877 Email: sales@hannmfg.com Web: www.hannmfg.com Welcome Welcome
More informationDIVISION 12 - FURNISHINGS. Section General Discussion. Introduction
Section 12000 - General Discussion This General Discussion Section contains material which is important to the successful fabrication and/or installation of furnishings and equipment in construction projects.
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationHARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK
HARDWARE and PRODUCT SPECIFICATIONS ANTIMICROBIAL CASEWORK HARDWARE SPECIFICATION KEY 1. DOOR/DRAWER PULLS 2. HINGES 3. DRAWER SLIDES 3A. DRAWER SLIDES 3B. FILE DRAWER SLIDES 4. LOCKS 4A. DRAWER LOCKS
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationKLOPPENBERG Quality is the Best Buy Furniture
Furniture Standard Bed Product Specifications Body: Frame: 5/8 Thick Interchangeable Panels 16 ga 1 ½ Type 304 tubular stainless steel with adjustable foot inserts, fully welded and polished joints Unit
More informationAIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS
AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer
More informationFLUENT Technical Specifications
CONSTRUCTION AND MATERIALS Worksurfaces Exterior surfaces Miter construction Vertical legs Metal components Resin material Glass Leveling glides Drawer fronts Drawer sides and back Drawer suspensions Locks
More informationTable of Contents. Steel Frame Bench...3. Workbench Island Locker Bench Pedestal Bench Table...8. Specialty Project Workstation...
Commercial Cabinetry and Millwork Table of Contents Steel Frame Bench... Workbench...4-5 Island Locker Bench...6-7 Pedestal Bench Table...8 Specialty Project Workstation...9 Crafts Table...10 Steel Frame
More informationWELLNESS CENTER REMODEL UNIVERSITY OF CALIFORNIA, MERCED MERCED, CALIFORNIA PROJECT NO.: 907432 C. Solid Surfacing Material: 1. Manufacturers: D. Wood: a. First Floor; Wilsonart International, Solid Surfaces,
More informationSECTION CUSTOM CABINETS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Preparation for installing utilities. 1.02 RELATED REQUIREMENTS SECTION 06410 - A. Section
More informationInsolroll Clutch Operated Shades Installation Instructions Installation Instructions
All clutch operated shades are shipped fully assembled and ready for installation. Mounting screws are not provided. Screws for chain guide installation to meet the child safety standards are provided.
More informationEDUCATOR SERIES. Wood Casework Solutions For Life. Learning. Discovery.
EDUCATOR SERIES Wood Casework Solutions For Life. Learning. Discovery. Always True to Your Vision. CiF Lab Solutions Experience Commitment to Excellence With decades of experience in manufacturing premium
More informationDisassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
More informationSECTION MANUFACTURED CASEWORK
1 GENERAL 1.1 SECTION INCLUDES SECTION 12300 MANUFACTURED CASEWORK A. Work required to complete the manufactured casework indicated by the Contract Documents, and the items necessary for its proper installation.
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More informationINSTALLATION GUIDE FOR METAL LABORATORY CASEWORK
LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1
More information***************************************************************************************************************
06400 ARCHITECTURAL WOODWORK SPECIFIER: CSI MasterFormat 2004 number 06 40 00 PART 1 GENERAL 1.1 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install
More informationB. American Society for Testing and Materials (ASTM):
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install millwork and cabinet work. Install
More informationCaseworkUSA. specifications. 1.1 General 1.2 Summary. 1.3 Related Sections. 1.4 Definitions. 1.5 Qualifications and Quality Assurance
1.1 General 1.2 Summary A. This section includes the following Scope of Work as referred to in the plans: 1. Plastic laminate manufactured casework 2. Plastic laminate countertops 1.3 Related Sections
More informationSchool Seating. Modern Cantilever Design. Lightweight ergonomic design. Waisted to allow reverse seating. High quality construction.
Page 1 To Order Call: 502-491-5009 School Seating Lightweight ergonomic design High quality construction Multiple color choices to fit your needs Modern Cantilever Design Waisted to allow reverse seating
More informationJeff Branch WOODWORKING YOU CAN BUILD A. By adding subtle design elements, a traditional furniture style becomes decidedly modern.
Jeff Branch WOODWORKING YOU CAN BUILD A By adding subtle design elements, a traditional furniture style becomes decidedly modern. Jeff Branch WOODWORKING Publisher: Jeff Branch Editor: Jeff Branch Art
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationGE Monogram. Installation. Instructions. Microwave Oven. Under Cabinet Installation. and. JX827 Series Built-In Kit. Models.
GE Monogram Installation Instructions Under Cabinet Installation and JX827 Series Built-In Kit Models ZEM200 Series CAUTION WARNING Before you begin Read these instructions completely and carefully. IMPORTANT:
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationA great addition to Sub-Zero's complete line of
with Refrigeration Drawers Discreet lighting Full-view glass door (standard) Roller-assembly shelves UV-resistant glass Lighted electronic control panel Divider gasket Model 427R Lighted display shelf
More information1. Division 6: Rough carpentry, blocking within walls to adequately support casework. 2. Division 9: Furnishing and installation of base molding.
SECTION 12 32 00 - WOOD LABORATORY CASEWORK PART 1: GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood Casework. Furnish all cabinets and casework, including tops, ledges, supporting structures, and miscellaneous
More informationForever Young This group is one of our premium editions. crafted from Mighty Maple or Extreme Oak!
This group is one of our premium editions. crafted from Mighty Maple or Extreme Oak! Casecraftfurniture.com Page 1 CaseCraft is a quality resource for finely crafted and durable contract furniture Our
More informationPlans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com
Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com
More informationZIC360NR GE Monogram 36" Built-In Bottom Freezer Refrigerator with Automatic Icemaker The Installation Space
ZIC360N GE Monogram 36" Built-In Bottom Freezer efrigerator The Installation Space The finished cutout width must be 35-. 84- max 83- min Finished Opening 10" 3 6" The cutout depth must be 24" The refrigerator
More informationFloor Boxes. Concealed Service Floor Boxes. Engineering Data 663 Series. Faces Plates for 663 Floor Box. 663 Series Floor Box
Concealed Service Floor Boxes 663 Series Floor Box 663-SC Multiple service floor box that delivers power, communications and data from standard conduit with no exposed service fitting Result: Open office
More informationMetal Base Cabinet Details (S-Line Series) Metal Base Cabinets Metal Sink Base Cabinets
METAL BASE CABINETS Contents Metal Base Cabinet Details (S-Line Series)...8.02 Metal Base Cabinets... 8.03-8.10 Metal Sink Base Cabinets... 8.11-8.12 Metal Hood Base Cabinets...8.13 Metal Acid Storage
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationWilsonstak. library bookstacks general specifications. Wilsonstak
Wilsonstak library bookstacks general specifications Wilsonstak Scope This specification covers delivery and installation of Steel Bookstack Shelving of the bracket type only. Unit heights, depths and
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationBridges 2.0.
www.contract.thomasville.com Thomasville Contract is a renowned resource for quality crafted furniture. Since 1904, Thomasville Contract has been creating fine furniture with craftsmanship you can see
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationC. Installation shall be by experienced carpenters. Coordinate with plumbing and electrical contractors.
12300 - MANUFACTURED CASEWORK PART 1 - GENERAL 1.01 STIPULATIONS A. The specifications sections General Conditions, Special Requirements, and General Requirements form a part of this section by this reference
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationCleanBench Laboratory Tables
CleanBench 63 Series High-Performance Lab Tables... 2 Accessories Faraday Cages...11 SpaceSaver Overhead Rack...21 Support Bars...27 Sliding Shelves...37 Perimeter Enclosure...37 Casters...38 63-600 Series
More informationWADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
More informationS.NO Description Quantity Rate Amount
INTERIOR WORKS NANDIMANDALAM BRANCH S.NO Description Quantity Rate Amount 1 Full height partition with laminate finish and glass. Providing & fixing partly glazed partly paneled Dry Wall Partition with
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationWHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK
WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK Accessories. We believe that functionality is at the heart of any great kitchen. Above are a few of the accessories available with Merillat Essentials. The
More informationL & T Open Shelf Filing System
L & T Open Shelf Filing System Contemporary Styling Shelf covers shelf supports for a clean contemporary look. Sleek, Attractive Appearance With no exposed holes on uprights. Easy Assembly Shelf supports
More information05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes 05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A76 A76 pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab Δ déåéê~ä=^ééäáå~íáçåë o^`l=ñäççê=äçñéë=~êé=áçé~ääó=ëìáíéç
More informationArlink 8000 Workstation
Arlink 8000 Workstation Instructions for Assembly Introduction Basic Frame Assembly Worksurface Assembly Drawer and Power Beam Assembly Light Fixture and Shelves Worksurface Grounding Instructions Wrist
More informationFURNITURE LABORATORY STEEL CASEWORK CASEWORK CONSTRUCTION DETAILS AND SPECIFICATIONS. Overview
CASEWORK CONSTRUCTION DETAILS AND SPECIFICATIONS Overview Cabinets Each cabinet is fabricated from prime quality furniture grade cold rolled or 304-4 stainless steel. All components are die formed, notched,
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationapplication guide S TA N D A R D H E I G H T W O R K S TAT I O N O V E RV I E W M U LT I - L E V E L W O R K S TAT I O N O V E RV I E W...
S TA N D A R D H E I G H T W O R K S TAT I O N O V E RV I E W............2 0 M U LT I - L E V E L W O R K S TAT I O N O V E RV I E W.................2 1 19 W I R E M A N A G E M E N T O V E RV I E W.......................2
More information300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationIAC INDUSTRIES 895 BEACON STREET BREA, CA Phone (714) Fax (714) Workmaster Assembly Instructions
INDUSTRIES WORKMASTER SERIES Part #1 REV. (022011) IAC INDUSTRIES 895 BEACON STREET BREA, CA 92821-2926 Phone (714) 990-8997 Fax (714) 990-0557 www.iacindustries.com Workmaster Assembly Instructions Table
More informationAddendum. McKee and Associates Architecture and Interior Design. No. ONE Date: Project:
McKee and Associates Architecture and Interior Design Addendum No. ONE Date: 10.8.18 Project: A New Office for Gaston Elementary School for The Etowah County Board of Education Gadsden, Alabama A1.1 GENERAL
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationCascade Ph: Casework Fax: Corp
Cascade Ph: 541-928-3750 Casework Fax: 541-928-3880 Corp email: bill.yates@cascase.com Cascade Casework Corp SPECIFICATIONS FOR PLASTIC LAMINATE FACED CASEWORK Specifications Section 12300 Section 06400
More information129 KITCHEN BASE CABINET 480
129 KITCHEN BASE CABINET 480 There are two sorts of kitchen cabinets: base cabinets, which sit on the floor, and wall cabinets. Base cabinets provide both storage space and work surfaces. They often house
More informationRevised
Indentify Non-powered panels and separate from Powered panels. Non-powered panel shown at left.. Powered panel shown at left has powerway mounted at factory. Also separate panels by surface type, width
More informationWAL-MART SUPERCENTER # ; Milwaukie, OR: SPECIFICATIONS. Revisions to Specification Fence
MILWAUKIE OR #3144-00 ADDENDUM #5 NARRATIVE: 11-08-12 WAL-MART SUPERCENTER #3144-00; Milwaukie, OR: SPECIFICATIONS SPECIFICATIONS Revisions to Specification 02822 Fence Spec division 02822 has been revised
More informationSECTION MANUFACTURED WOOD CASEWORK. A. This Section includes wood laboratory casework, countertops, fixtures and accessories.
SECTION 12321 MANUFACTURED WOOD CASEWORK PART 1 - GENERAL 1.1 SUMMARY A. This Section includes wood laboratory casework, countertops, fixtures and accessories. B. Related Sections include the following:
More informationBCI General Specifications Design: BCI Gothia Shelving System
BCI General Specifications Design: BCI Gothia Shelving System SH7.0 General Product Design and Construction SH7.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More information