26-29 septiembre. Acapulco, Acapulco, September 26 th -29 th, 2018

Size: px

Start display at page:

Download "26-29 septiembre. Acapulco, Acapulco, September 26 th -29 th, 2018"

Sheena Page
5 years ago
Views:

1 26 Acapulco, - 29 septiembre. September Acapulco, 26 th -29 th, 2018

2 The Mexican Association of Petroleum Geologists (AMGP), the Mexican Association of Exploration Geophysicists (AMGE), the Association of Petroleum Engineers of Mexico (AIPM), the College of Petroleum Engineers of Mexico (CIPM) and the Society of Petroleum Engineers (SPE) - Mexico Section, invite all professionals who work for the oil industry to submit technical or research work to the Technical Program of the Mexican Petroleum Congress 2018, under the following. BASES I. Place, date and time The technical program will be held in the facilities of the Expo Mundo Imperial in the city of Acapulco, Guerrero, on September 27-29, 2018 from 9:00 a.m. to 6:00 p.m. II. Categories and Subjects The works should contribute to the progress of the Oil Industry and be related to the following topics: Geosciences CATEGORY SUBJECT Geomatics applied to the exploration and production of hydrocarbons Geophysics: Design, acquisition, processing and interpretation of data Geotectonic and Geological-Structural Modeling applied to Exploration and Production Stratigraphy and Sedimentology of Rocks Storage, seal and generators of hydrocarbon Geochemistry and Basin Modeling - Oil Systems Modeling and Evaluation of Conventional and Non-Conventional Plays Petrophysics and Geological Characterization of Conventional and Non-Conventional Fields Design and Geological Control of Exploratory Well Drilling and Development Numerical Simulation of Conventional and Non-Conventional Naturally Fractured Secondary Recovery of Improved Recovery of Technical and Economic Evaluation of Hydrocarbon Reserves

3 Phase Behavior and Characterization of Fluids in Reservoir Conditions (PVT) Measurement Technologies and Evaluation of Formation Pressure Testing Fluid Flow in Porous Media Production Data Analysis Monitoring and Control of Conventional and Non-Conventional Development and Exploitation of Heavy-Oil and Ultra Heavy-Oil Development and Exploitation of in Deep-Waters Laboratory Studies of Physical and Chemical Properties of Rocks and Reservoir Fluids Development and Optimization of Exploitation Mature Oil Fields Marginal Oil Fields New Oil Fields: Conventional and Non-Conventional Hydrocarbon Production and commercialization Systems - Hydrocarbon Production Facilities Artificial Hydrocarbon Production Systems Measurement of Hydrocarbon Transport Networks Processes of Production and Commercialization of Optimization of Hydrocarbon Production and Distribution Automation of the Production and Distribution of Flow Assurance of Hydrocarbon Production

4 Mixing and Improvement of Hydrocarbon Production Flow Well Intervention Drilling of Exploratory Wells and Under Balance Development Drilling of Horizontal and Vertical Wells Well Completion Geomechanics and Well Stability Drilling Fluids Well Repair Technologies for Control and Evaluation of the Well Drilling and Completion Process Industrial Safety, Hygiene and Environmental Protection Industrial Security Applied to the Exploration and Production of Health at Work Applied to the Exploration and Production of Environmental Protection Applied to the Exploration and Production of Sustainable Development of the Exploration and Production of Management and Business Human Resources - Personnel Development and Oil Business Culture Oil Exploration and Production Business Processes Project Management of Oil Exploration and Production Oil Management Systems and Alliances and Partnerships Operation Risk and Uncertainty of Oil Exploration and Production Businesses International Practices for the Regulation of Oil Exploration and Production Information Technology Information Systems Applied to the Exploration and Production of Exploration and Production Databases

5 III. Deliverable Full article at a maximum of 20 pages septiembre. Acapulco, 2018 IV. Characteristics 1. The manuscripts may be in Spanish or English. 2. They must be sent to the Technical Program Committee of the Congress with a maximum length of 20 pages, including tables, graphs, figures, photographs, etc., which must be placed in the corresponding place and sent in TIFF or JPG format with a 300 dpi minimum quality. 3. They should be written in a column with 3 cm margins on the left side and 2 cm margins on the remaining sides. The interlinear spacing should be 1.5, with 12 point Arial font for the text and 14 point for titles, using the corresponding orthographic accents in capital letters. The word processor must be Microsoft Word. 4. The heading of the article should integrate the following information: Work identifier (CMP2017_XXX, leave like this and if approved, a number will be assigned) Title of the work: it should be short and concise, without exceeding 15 words (the first in capital letters and the others in lowercase) Information about the main author and co-authors: full name, and in parentheses name of the institution or company to which they belong 5. The structure of the article should contain: Summary Introduction Topics and subtopics Tables Graphics Conclusions Nomenclatures (if applicable) Special thanks Annexes (if applicable) References Professional career of the author and co-authors 6. The summary should not exceed 250 words. 7. The development of the Subject should contain: inputs used, methodology, results and discussion of results. 8. Mathematical expressions should be written clearly, taking care that the symbols are legible and using the International System of Units. 9. The references listed in the development of the works should be noted indicating the author s last name and the year of its publication. For example: Recently, García (1996)..., or, In a recent work (García, 1996)... For three or more authors: García et al. (1996). These references will be quoted at the end of the text and in alphabetical order according to the manual established by the Publication Style Guide (SPE) that are exemplified below. Books: Bourdet, D Well Test Analysis: The Use of Advanced Interpretation Models. Amsterdam: Elsevier.

6 Articles: Hernández García, M.A Desarrollo del Campo Cauchy: Caso de Éxito en la Región Norte. Ingeniería Petrolera LII (2): Soliman, M.Y., Miranda, C. and Wang, H.M Application of After-Closure Analysis to a Dual- Porosity Formation, to CBM, and to a Fractured Horizontal Well. SPE Prod & Oper 25 (4): SPE PA. Conference, meeting, etc.: Al-Khalifa, A.J. and Odeh, A.S Well Test Analysis in Oil with Gas Caps and/or Water Aquifers. SPE Article 19842, featured in: SPE Annual Technical Conference and Exhibition, San Antonio, Texas, October Thesis: Pérez Martínez, E Estudio de Conificación de Agua en Yacimientos Naturalmente Fracturados. Master s Thesis, UNAM, Master s and Doctoral Program in Engineering, Mexico City. Miguel Hernández, N Scaling Parameters for Characterizing Gravity Drainage in Naturally Fractured Reservoir. PhD dissertation, University of Texas at Austin, Austin, Texas. PDF (online): Secretaría de Energía. Dirección de Planeación Energética Balance Nacional de Energía _2.pdf (descargado el 1 de febrero de 2010) Guidelines: NRF-005-PEMEX Protección Interior de Ductos con Inhibidores Mexico City PEMEX, Comité de Normalización de Petróleos Mexicanos y Organismos Subsidiarios. Software: Eclipse Reservoir Engineering Software Schlumberger, The professional career of the author and co-authors should not exceed 100 words each in the language in which the article was written, these will be located after the references. 11. The attached sample format should be used. 12. The digital file should be named as follows: Nameofauthor_lastnames.doc Example: juan_perezsanchez.doc If several jobs: juan_perezsanchez1.doc juan_perezsanchez2.doc juan_perezsanchez3.doc

7 V. Reception of Works 1. The deadline for receipt of articles: May 28, The works must be sent through the website: aspx 2. Only works that meet the specified requirements for the full article will be accepted. 3.- The article must be accompanied by a Responsive Letter from the Author(s) about the data, information used and/or the corresponding permission to use the data-information of third parties. VI. Works Evaluation and Acceptance 1. The deadline for acceptance notice of approved works: June 8, All submitted articles will be previously evaluated by two or more members of the Technical Expert Evaluators Group formed for the Mexican Petroleum Congress 2018, who will study its content and will rate and make observations about its publication. In this process, recognized and high-level specialists will participate in the different areas of expertise, with the ability and experience to reliably evaluate both the quality and originality, as well as the merit of the content of the articles received.

SPE Annual Caspian Technical Conference and Exhibition

Supported By: SPE Annual Caspian Technical Conference and Exhibition 31 October 2 November 2018 www.spe.org/go/18ctce Call for Papers Submission Deadline: 23 April 2018 Astana, Kazakhstan Letter from the