DMLS OF INJECTION MOULD INSERTS FROM 2004 UNTIL TODAY

Size: px
Start display at page:

Download "DMLS OF INJECTION MOULD INSERTS FROM 2004 UNTIL TODAY"

Transcription

1 DMLS OF INJECTION MOULD INSERTS FROM 2004 UNTIL TODAY LBC LaserBearbeitungsCenter GmbH Im Moldengraben 34 D Kornwestheim Tel.: 07154/ Fax: 07154/ Internet:

2 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market

3 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market Possible mould solutions

4 LBC offers the generative manufacturing of metal parts since 2004 as a service. Therefore LBC is one of the pioneers using this technology, especially in mould and diecasting applications. At the beginning we used the Trumaform LF 250 from TRUMPF. Since 2006 LBC is using the M270 from EOS.

5 LBC was able to boost the acceptance and request for lasergenerated moulds, prototypes and serial parts constantly. In March 2008 the manufacturing capacity was increased to 2 machines. In December 2009 the third machine was installed. Air conditioned manufacturing cell

6 Today LBC is especially for the mould and diecasting market the service supplier with the biggest manufacturing capacity for lasergenerated parts in Germany. Facts: approx. 95% of the lasergenerated parts are. conformal cooled inserts. approx. 4% of the lasergenerated parts are. for serial applications approx. 1% of the lasergenerated parts are. prototyps LBC was consuming approx kg. of the material , tendency is increasing. One bottle corresponds with 10 kg powder material

7 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market

8 engineering: LBC is now commercially introducing a professionally engineered approach. The focus of this approach is analyzing new or existing moulds, reviewing the thermal efficiency, then optimize the design, resulting in the manufacture of Tailored conformal cavity cooling. As experts in the lasergenerating manufacturing processes as well as our strength in developing and designing injection moulding tools LBC can offer you the opportunity to see what can do for your projects. For the best part quality and most efficient production, should be your first choice. is the LBC brand for individual, customer specific solutions with conformal cooling and the manufacturing of lasergenerated mould inserts.

9 engineering - helpdesk: The technology Lasergenerating is offered by LBC as services. Since 2004 we were able to establish a hugh know-how. This knowledge is the base to realize customer wise tasks. Especially for new customers our detailed helpdesk is the needed support to erase the respect or fear regarding this new technology In an open discussion about all facts, the customer receives all background information he needs. This is the base for a good, future cooperation and the key for our success.

10 engineering - design: In order to support our customers when optimizing the realisation of conformal cooled inserts and moulds, LBC offers the design of the channel inside the customer's mould. LBC provides the customer with the design data in 3 D for their approval.

11 engineering - design: Information: This conformal cooling system is used in an insert since more than 4 years. Geometry: Ellipse standing 1,3 mm x 1,8 mm equates Ø 1,53 mm 2 closed loops 1x 4-times parallel 1x 5-times parallel Is running with 6 bars and filtering Cooling medium: water Total length of all channels is mm! Cooling cycle is the half!

12 engineering - design: Flow demonstration: Geometry: Ellipse standing 1,3 mm x 1,8 mm equates Ø 1,53 mm 1 closed loop 1x 4-times parallel Each channel is 800 mm long. Is running with 3 bars Cooling medium: water Total length of all channels is mm!

13 Information: engineering - design: Complex mould require an extensive design to realize a perfect cooling. This design is based on fundamental know-how of the designer. So it was possible to provide this channel system. 8 channels with Ø 3 mm and nearly identical length branch out of a 10 mm input. This guaranties identical flow in all channels.

14 Information: engineering - design: Sample of an extensive design to realize a perfect cooling.

15 engineering - simulation: The simulation of the expectable cycle time reduction is no manageable with any simulation software, because of the complexity of the conformal cooling systems caused by Lasergenerating. As simulation is the key to check on the efficiency of cooled inserts, LBC offers this simulation as a service. So the customer's purchasing department receives facts for their decision.

16 engineering - simulation: basics Information: The simulation of a conformal cooling is done together with a flow analysis. Using the software LBC has a tool, to implement the total design of conformal cooling channels. Therefore we need the following article as 3D CAD data, injection points, form of the injection (e.g. hot runner), plastics with data sheet, process parameters injection CAD data of the conventional cooling, cooling data, flow volume, pressure, number of closed loops, temperatures etc.

17 engineering - simulation: Temperature difference Information:

18 engineering - simulation: Reynolds number

19 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market Possible mould solutions

20 realized mould inserts Information: Laser generated cooling core insert for a 2- components injection mould for an ice scraper. By the integrated cooling ducts close to contour, the cycle time could be reduced from 80 seconds to 40 seconds. Thus allows the production of twice as much parts.

21 realized mould inserts Information: conformal cooled insert with closed loop cooling channels

22 LASERGENERATING realized mould inserts Thermografy:

23 Lasergenerating on a premanufactured hybrid blank Signification of the hybrid technology Information: Reduction of the generatable volume to the needed minimum for an effective cooling. Dramatically reduce of the manufacturing costs. Gain of the lasergenerating profitability. More effective use of the laser capacity.

24 Lasergenerating on a premanufactured hybrid blank Fitting basic material: Information: (Böhler W722 VMR) deliverable up to Ø122 mm turned and as 150 x 150 mm square Vacumar from Zapp, martensite steel analogue All dimensions are deliverable. The use of or is not possible!! You will have a big danger for cracks. Crack of a hybrid blank (hardened)

25 realized mould inserts, using a hybrid blank Information: Insert lasergenerated on a hybrid blank Using this premanufactured volume the production cost could be dropped 50%. The hybrid material has to be also mould making steel.

26 realized mould inserts, using a hybrid blank Information: Conformal cooled mould insert, on a premanufactured hybrid blank. Without using the hybrid solution, this insert would not have been manageable economically and the run time of the machine would have been to long.

27 DMLS current status Basics about LBC engineering solutions Implementation Here we are today Needs for the future Technology (EOS) Market Possible mould solutions

28 Here we are today In 2004 the acceptance of the lasergenerating was more or less ZERO. Nearly no mould maker wanted to believe in this new technology. A lot of question had to be answered and it was a hugh challenge to get the first orders. Nearly no mould maker wanted to be first! They did not accept the surface roughness and could not believe that the material property will fit to their needs. Detecting the outside zero point with a touch probe was not as easy as with today's surfaces, built on a M270.

29 Here we are today Surface roughness of an insert produced on the Trumaform LF250 at LBC. Material: Layer thickness: 0,1 mm

30 Here we are today Surface roughness of an insert produced on the M270 at LBC. Material: Layer thickness: 0,04 mm

31 Here we are today Limits: The volume rate is still limited The maximum size of generatable inserts is limited Will the channels get blocked? Is the material property good enough? What is the lifetime of such an insert? Will the higher costs be paid by the injection moulder, who has the benefit? Still no content of teaching at Universities Still no content of teaching at professional schools

32 Here we are today Technology EOS: The new M280 is an important step into the right direction. The volume rate will be growing nearly 100%. Parts up to 300 mm, especially hybrid solutions, can be lasergenerated in. one piece.

33 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market

34 Technology EOS: LBC s wishes for the next generation of M-series are: The volume rate should be improved as much as possible More different sizes of the building chamber This machine has to be designed for mass production issues Costs down, especially for spare parts and service

35 DMLS current status Basics about LBC engineering solutions Implementation, Here we are today Needs for the future Technology (EOS) Market Possible mould solutions

36 Market: Having machines with highest productivity the market would be enormous. Starting with the M280 we will able to compete against several other solutions of conformal cooling as: soldered inserts diffusion welding hugher and longer inserts will be manageable New application will follow step by step!

Rainer Salzberger

Rainer Salzberger IUM 2008 E-Manufacturing Solutions for Tooling Rainer Salzberger 16.04.2008 Content Tooling Applications New EOS-products Design Rules Conformal Cooling Softwaresolutions for Molddesign and Simulation

More information

IMPETUS Rapid Tooling

IMPETUS Rapid Tooling IMPETUS Rapid Tooling www.impetus-engineering.de 1 Close-to-production parts from steel-mould within 4 weeks >> Design check by plastic technology experts and advice for optimization >> Close-to-production

More information

We put our stamp on your project - for 45 years

We put our stamp on your project - for 45 years We put our stamp on your project - for 45 years 1970-2015 Deep drawing Ni-Silver 0.6x1.5x2.3 mm Ø 1 mm Welcome to Stansomatic We put our stamp on your project Stansomatic are the experts in stamping advanced

More information

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication.

A customer requiring anonymity was able to procure the casting it needed at a lower cost and lead time than its previous fabrication. Rapid Tooling Opens New Diecasting Doors Think diecasting tooling will ruin your lead times? Think again. North American Die Casting Association, Wheeling, Illinois Manufacturers seeking a competitive

More information

Built-Rite Tool & Die

Built-Rite Tool & Die Studio System case study 01 Built-Rite Tool & Die Injection molding firm investigates quick-turn mold application, identifies 90% cost savings. 02 Built-Rite cavity insert installed in the mold plate.

More information

Engineered to order. Microtherm delivers added value

Engineered to order. Microtherm delivers added value Engineered to order Microtherm delivers added value - Microtherm has the know how, technology and experience to give your innovation marketability (TS 16949) - In addition to the R&D-process, Microtherm

More information

METAL LAMINATED TOOLING - A QUICK AND FLEXIBLE TOOLING CONCEPT

METAL LAMINATED TOOLING - A QUICK AND FLEXIBLE TOOLING CONCEPT METAL LAMINATED TOOLING - A QUICK AND FLEXIBLE TOOLING CONCEPT Thomas Himmer*, Dr. Anja Techel**, Dr. Steffen Nowotny**, Prof. Dr. Eckhard Beyer**,*** * Fraunhofer USA, Inc., Center for Coatings and Laser

More information

4 + 5 INGERSOLL WERKZEUGE - THE COMPANY STANDARD PLUS - EXPANDING THE RANGE NONFERROUS & ALUMINUM - USE OUR EXPERIENCE

4 + 5 INGERSOLL WERKZEUGE - THE COMPANY STANDARD PLUS - EXPANDING THE RANGE NONFERROUS & ALUMINUM - USE OUR EXPERIENCE 4 + 5 Ingersoll!"#$%& 4 + 5 INGERSOLL WERKZEUGE - THE COMPANY 6 + 7!"#$!"# 6 + 7 STANDARD PLUS - EXPANDING THE RANGE 8 + 9! &!"#$% 8 + 9 NONFERROUS & ALUMINUM - USE OUR EXPERIENCE 10+11!"#$%&' 10+11 AUTOMOTIVE

More information

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from RAIMANN: FlexiRip is synonymous with flexible ripping The original Jrion from Raimann stands for

More information

The Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology

The Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology The Leitz power package for window and door production on CNC controlled machines RipTec ripple technology HSC technology Combined window tool systems Light metal alloy tools, coated drills and router

More information

MADE IN GERMANY INDUSTRIAL ENAMELLING DIES

MADE IN GERMANY INDUSTRIAL ENAMELLING DIES INDUSTRIAL ENAMELLING DIES MADE IN GERMANY Headquarter Euromicron Group Frankfurt a. M. Dear valuable Customer, engine design, measuring technology, or textile industry for almost every industry segment

More information

rapid casting development with simulation and QMC

rapid casting development with simulation and QMC 1 Rapid casting development by means of Qualified Master Casting (QMC) and numerical simulation modeling Dr. Joachim Gundlach Grunewald 2008 2 1. Grunewald 2. Rapid Prototyping techniques 3. casting development

More information

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications

International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications 1 2 International Foundry Challenge Suitable Production of thin walled Aluminum Prototype and Small Series Castings for Body in White Applications Joachim Gundlach, Jörg Detering Contents 3 Company Information

More information

General functional principle of laser-sintering

General functional principle of laser-sintering EOS EOS in Brief EOS Technology Additive Manufacturing This technique enables the production of components directly from 3D CAD data. Components are built up layer by layer from materials supplied as fine

More information

Precision Innovation Complexity

Precision Innovation Complexity Precision Innovation Complexity Complexity & cost control Nature is the model Highly complex forms in nature have often served as a basis for the design of new components and systems; their complete realisation

More information

YOUR WORLDWIDE PARTNER FOR USED TRUMPF MACHINES

YOUR WORLDWIDE PARTNER FOR USED TRUMPF MACHINES I-H&S INTERNATIONAL YOUR WORLDWIDE PARTNER FOR USED TRUMPF MACHINES I-H&S with its used machines and services has actively competed in international markets too since 1996. We would be pleased to support

More information

Toolmaking Stamping technology Injection moulding Assembly technology

Toolmaking Stamping technology Injection moulding Assembly technology One of our most convincing arguments: the company management Would you like to become our customer or do you have a technical production challenge for us? Then we would like to invite you to visit us so

More information

About EOS. Step 01. Step 02. Step 03

About EOS. Step 01. Step 02. Step 03 EOS EOS in Brief About EOS Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven integrated e-manufacturing solutions for Additive Manufacturing (AM).

More information

HAMUEL MineralCasts Competence from one source

HAMUEL MineralCasts Competence from one source HAMUEL MineralCasts Competence from one source High-tech for machine bases and components High-precision machining Your industry Your applications Machine tools, Medical technology Micro production Energy

More information

DISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR

DISKUS Double-Face-Grinding-Machines. Series: DDS 457 XR DDS 600 XR DDS 750 XR DISKUS Double-Face-Grinding-Machines Series: DDS 457 XR DDS 600 XR DDS 750 XR DDS 457 600 750 XR Three grinding methods meeting different production problems: 1. Through-feed grinding For large mass-production

More information

RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION

RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION RAPID PROTOTYPING, RAPID TOOLING AND LOW VOLUME PRODUCTION Delivering superior quality, service and reliability with three (3) standard production

More information

This is trial version

This is trial version Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering

More information

Collection. For metal & acetate & injection frames. For metal & acetate & wood frames. For acetate & special material frames

Collection. For metal & acetate & injection frames. For metal & acetate & wood frames. For acetate & special material frames Collection For metal & acetate & injection frames For metal & acetate & wood frames For acetate & special material frames For nickel silver & aluminium & titanium frames 2 Benefits 3 PIECE CONSTRUCTION

More information

controlled energy Å V^

controlled energy Å V^ controlled energy Å V^ Interview with Ralf Schwarzkopf, CEO of Hotset GmbH What are the reasons for these changes? And this has changed hotset s self-perception? hotset is presenting itself with a new

More information

WE Kunststoff-Technik GmbH WE System GmbH KHL Interior GmbH

WE Kunststoff-Technik GmbH WE System GmbH KHL Interior GmbH We shape your ideas. WE Kunststoff-Technik GmbH WE System GmbH KHL Interior GmbH TOOL MANUFACTURING INJECTION MOLDING assembly CABLE ASSEMBLY LAMINATIONS EXPERTISE We offer: Individually manufactured plastic

More information

PRODUCTION TOOLING FOR POLYMER COMPONENTS VIA THE DTM RAPIDSTEEL PROCESS

PRODUCTION TOOLING FOR POLYMER COMPONENTS VIA THE DTM RAPIDSTEEL PROCESS PRODUCTION TOOLING FOR POLYMER COMPONENTS VIA THE DTM RAPIDSTEEL PROCESS KW Dalgarno, TD Stewart, & THC Childs School of Mechanical Engineering, University of Leeds, Leeds, LS2 9JT, UK Abstract This paper

More information

HIGHER QUALITY. FASTER MOULDS.

HIGHER QUALITY. FASTER MOULDS. HIGHER QUALITY. FASTER MOULDS. Established in 1952, SCHÖTTLI has evolved from pioneer of the injection moulding industry to global player and specialist for developing and manufacturing moulds and complete

More information

WEINIG tool grinding machines

WEINIG tool grinding machines RONDAMAT-SERIES WEINIG tool grinding machines From the raw blank to a perfectly ground tool 1 WEINIG offers more WEINIG s successful path in wood processing is characterized by listening to our customers

More information

Moulds In-Mould Labelling Robots. Best quality. Providing the basis for your success

Moulds In-Mould Labelling Robots. Best quality. Providing the basis for your success Moulds In-Mould Labelling Robots Best quality Providing the basis for your success Solutions Moulds In-Mould Labelling Robots Müller is among the world s leading suppliers of injection moulds and high-performance

More information

CalcMaster. Innovative advising and calculation software. As conversation partner on table with the:

CalcMaster. Innovative advising and calculation software. As conversation partner on table with the: CalcMaster Innovative advising and calculation software As conversation partner on table with the: Product designer Mould maker Injection moulder - Purchasing - Sales and Management CalcMaster software

More information

Tooling mold. Tooling mold

Tooling mold. Tooling mold Tooling mold Tooling mold * 1 cavity black box mold * Customer is from USA, a professional plastic parts supplier. * With Hasco standard mold base, mold base material is with S50C. * With Hasco standard

More information

AMADA MACHINE TOOLS EUROPE

AMADA MACHINE TOOLS EUROPE AMADA MACHINE TOOLS EUROPE PRODUCT OVERVIEW MILLING TECHNOLOGY THV DUPLEX MILLING MACHINES PMH PLATE MILLING MACHINES AMADA MACHINE TOOLS Headquarters in Japan (Isehara) High-tech Development Centre near

More information

Kittec -CBG Gas. U s e r s M a n u a l

Kittec -CBG Gas. U s e r s M a n u a l Kittec -CBG Gas U s e r s M a n u a l Contents Page Table of contents 1 About this Users Manual 2 Use of the kiln 2 Safety 2 Safety tips 3 Installation and Operation 4 Storage and transport 4 Installation

More information

Laser systems: Up to the challenge. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology

Laser systems: Up to the challenge. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Laser systems: Up to the challenge. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser technology. Contents The most versatile tool in the world.

More information

KLEINER Stamping technology Assembly manufacturing

KLEINER Stamping technology Assembly manufacturing KLEINER Stamping technology Assembly manufacturing We think solutions. 2 Welcome to KLEINER STANZTECHNIK. The terms apples and oranges are used to refer to things that cannot be compared. At KLEI- NER,

More information

LPC-Engineering-Service

LPC-Engineering-Service ALD Vacuum Technologies High Tech is our Business LPC-Engineering-Service Your R&D partner for the case hardening of gear components High Tech is our Business ALD is the global brand for innovative vacuum

More information

Clamping filigree parts

Clamping filigree parts Clamping filigree parts August 2005 Getting a good hold on bits and pieces For almost all shapes and sizes of parts there are suitable clamping technologies available on the market. However demands on

More information

It's ideas that are decisive. Ideas in great shape. With the Frech difference.

It's ideas that are decisive. Ideas in great shape. With the Frech difference. It's ideas that are decisive. Ideas in great shape. With the Frech difference. The Frech profile: Performance, variety, innovation. Intensive consulting, design support and production administration from

More information

Customer application high speed cutting:

Customer application high speed cutting: Paso Customer application high speed cutting: Paso Präzisionsmaschinenbau GmbH Boschstrasse 6 37412 Herzberg Tel : 05521 / 8516 0 Fax : 05521 / 8516 22 E-Mail : info@paso-maschinenbau.de Internet : www.paso-maschinenbau.de

More information

High Efficient Heat Dissipation on Printed Circuit Boards. Markus Wille, R&D Manager, Schoeller Electronics Systems GmbH

High Efficient Heat Dissipation on Printed Circuit Boards. Markus Wille, R&D Manager, Schoeller Electronics Systems GmbH High Efficient Heat Dissipation on Printed Circuit Boards Markus Wille, R&D Manager, Schoeller Electronics Systems GmbH m.wille@se-pcb.de Introduction 2 Heat Flux: Q x y Q z The substrate (insulation)

More information

University of Arizona College of Optical Sciences

University of Arizona College of Optical Sciences University of Arizona College of Optical Sciences Name: Nachiket Kulkarni Course: OPTI521 Topic Plastic Injection Molding Submitted to Prof. J. Burge Date 1. Introduction In daily life, we come across

More information

DIRECT METAL LASER SINTERING DESIGN GUIDE

DIRECT METAL LASER SINTERING DESIGN GUIDE DIRECT METAL LASER SINTERING DESIGN GUIDE www.nextlinemfg.com TABLE OF CONTENTS Introduction... 2 What is DMLS?... 2 What is Additive Manufacturing?... 2 Typical Component of a DMLS Machine... 2 Typical

More information

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 7: Injection Moulds Phase 2. Published by

Trade of Toolmaking. Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 7: Injection Moulds Phase 2. Published by Trade of Toolmaking Module 5: Press Tools, Jigs & Fixtures, Mouldmaking Unit 7: Injection Moulds Phase 2 Published by SOLAS 2014 Unit 7 1 Table of Contents Document Release History... 3 Unit Objective...

More information

Flexible Substrates and SCB-Technology

Flexible Substrates and SCB-Technology Flexible Substrates and SCB-Technology Substrate Technology As requirements are increasing, so are electronic systems becoming smaller and smaller and more complex. In its role as innovative forerunner

More information

BROCHURE. RM-RoboCut3D 6Kg CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM

BROCHURE. RM-RoboCut3D 6Kg CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM BROCHURE RM-RoboCut3D 6Kg CNC MACHINES INDUSTRIAL MACHINES ROBOTIC SYSTEM R M R O B O C U T 3 D 6 K g Robot educational solution for milling and Pick&Place www.ronchinimassimo.com ROBOT EDUCATIONAL SOLUTION

More information

sheet metal forming Simufact.forming The simulation solution for bulk sheet metal forming

sheet metal forming Simufact.forming The simulation solution for bulk sheet metal forming Simufact.forming The simulation solution for bulk Simulating Manufacturing Optimized forming processes Extended tool life time Efficient utilization of machine capacity Minimal material scrap and waste

More information

ALFRA PRESS. Made in Germany by ALFRA

ALFRA PRESS. Made in Germany by ALFRA 52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,

More information

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company

FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for

More information

Precision in plastic. atka Kunststoffverarbeitung GmbH

Precision in plastic. atka Kunststoffverarbeitung GmbH Precision in plastic atka Kunststoffverarbeitung GmbH www.atka.de Are your goals set high? The more global your action radius is, the more important strong local partners are, who are personally there

More information

Eckold GmbH & Co. KG. Clinchen. Stanznieten. Umformen. Bördeln. Falzen. Stanzen 1 / ENG-2.6

Eckold GmbH & Co. KG. Clinchen. Stanznieten. Umformen. Bördeln. Falzen. Stanzen 1 / ENG-2.6 Eckold GmbH & Co. KG Clinchen Stanznieten Umformen Bördeln Falzen Stanzen 1 / 31.03.15 ENG-2.6 Eckold Company figures medium sized company founded in 1936 120 employees in Germany / approx. 200 wold wide

More information

e-manufacturing applications: Laser Sintering and Direct Metal Laser Sintering current status -AILU Stuart Jackson Regional Manager UK & Ireland

e-manufacturing applications: Laser Sintering and Direct Metal Laser Sintering current status -AILU Stuart Jackson Regional Manager UK & Ireland e-manufacturing applications: Laser Sintering and Direct Metal Laser Sintering current status -AILU Stuart Jackson Regional Manager UK & Ireland EOS was founded in 1989 - worldwide market leader since

More information

Forged parts for life.

Forged parts for life. Forged parts for life www.gedore-forge.com iforge by GEDORE Competence in forging for over 150 years At GEDORE's forging centre in Remscheid, the company forges individual items of the highest quality

More information

Published by: BOY Machines, Inc. news

Published by: BOY Machines, Inc. news news Published by: BOY Machines, Inc. January 2018 Spritzgiessautomaten Editorial 25 Years Fakuma Friedrichshafen, Germany The Fakuma is the largest Exhibition worldwide dedicated nearly exclusively in

More information

Building Bridges Between R&D Institutions and Tool Making Sector (Slovene experiences)

Building Bridges Between R&D Institutions and Tool Making Sector (Slovene experiences) 11th International Cold Forming Congress 12th 14th September 2005 Chester, UK Building Bridges Between R&D Institutions and Tool Making Sector (Slovene experiences) Karl Kuzman University of Ljubljana,

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT III THEORY OF METAL CUTTING Broad classification of Engineering Manufacturing Processes. It is extremely difficult to tell the exact number of various manufacturing processes

More information

Konstruktionsbüro Hein GmbH Marschstraße 25, Neustadt (Hanover), Germany

Konstruktionsbüro Hein GmbH Marschstraße 25, Neustadt (Hanover), Germany Controlled reduction of distortions Introduction: Plastic parts often have a high degree of distortion if the geometries have not been optimised. An optimised geometry reduces distortions and tensions

More information

Shaping the future of die and moulds: EOS tooling applications

Shaping the future of die and moulds: EOS tooling applications Shaping the future of die and moulds: EOS tooling applications Augustin Niavas Business Development Manager Tooling Meeting SHL-EOS, Krailling, 27.05.2010 Index EOS What is DMLS for tooling? How will DMLS

More information

CNC-milling CNC-grinding Laser hardening and other treatments

CNC-milling CNC-grinding Laser hardening and other treatments CNC-milling CNC-grinding Laser hardening and other treatments. CNC-milling. 262 263 CNC-profile grinding. 264 265 Laser hardening. 266 Laser marking. 266 Wire eroding 267 Planing. 267 Sawing. 268 3D-index

More information

DIVISION METAL.

DIVISION METAL. Rotary Slitter Knives AND Accessories FOR Slitting Lines DIVISION METAL www.interknife.com ABOUT US A long tradition signifies commitment. The history of our company can be traced back to 1863. The manufacturing

More information

Multiplying Options. Keith Schneider is a big advocate for additive

Multiplying Options. Keith Schneider is a big advocate for additive By Christina Fuges Multiplying Options Additive manufacturing s greatest impact for this company is the versatility that has allowed it to offer different solutions than other manufacturers. Keith Schneider

More information

ProGap Microwave barrier

ProGap Microwave barrier Operating Instructions EN ProGap Microwave barrier SWR engineering Messtechnik GmbH CONTENTS Page 1. General Comment..................................................................... 3 2. Mounting and

More information

3D PRINTING & ADVANCED MANUFACTURING DESIGN GUIDELINES: DIRECT METAL LASER SINTERING (DMLS) STRATASYSDIRECT.COM

3D PRINTING & ADVANCED MANUFACTURING DESIGN GUIDELINES: DIRECT METAL LASER SINTERING (DMLS) STRATASYSDIRECT.COM 3D PRINTING & ADVANCED MANUFACTURING DESIGN GUIDELINES: DIRECT METAL LASER SINTERING (DMLS) STRATASYSDIRECT.COM WHAT IS DIRECT METAL LASER SINTERING? Direct Metal Laser Sintering (DMLS) is an additive

More information

Innovative laboratory equipment. Preliminary testing to determine the mix quality.

Innovative laboratory equipment. Preliminary testing to determine the mix quality. Innovative laboratory equipment. Preliminary testing to determine the mix quality. 02 03 More control. Improved quality. THE LABORATORY FOAMED BITUMEN PLANT PERFORMS A SERIES OF PRECISE MEASUREMENTS TO

More information

Seeing the big picture, optimising the details: Solutions in plastic for demanding applications

Seeing the big picture, optimising the details: Solutions in plastic for demanding applications Seeing the big picture, optimising the details: Solutions in plastic for demanding applications Complete solutions in plastic, from concept through to series manufacture Turning ideas into reality Short

More information

Experts for non-contact measuring technologies

Experts for non-contact measuring technologies Experts for non-contact measuring technologies Detecting - Positioning - Measuring Kempf GmbH & Co. KG realizes automation processes and logistic projects in heavy industries - especially in steelworks

More information

PERFECT SURFACES WORLDWIDE

PERFECT SURFACES WORLDWIDE A WELCOME FROM THE TECHNOLOGY LEADER in mass finishing Proverbial ingenuity, coupled with German efficiency and a love of perfection, are the best qualifications for developing successful ways of creating

More information

Introduction to Manufacturing Processes

Introduction to Manufacturing Processes Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing

More information

SHAPED BY INNOVATION.

SHAPED BY INNOVATION. SHAPED BY INNOVATION www.fishercast.com Engineering the best value At FisherCast Global, we are committed to engineering cost-effective, innovative manufacturing solutions for your small component production

More information

EPCA Germany. Cutting Edge Technology. experience matters

EPCA Germany. Cutting Edge Technology. experience matters Cutting Machines EPCA Germany Cutting Edge Technology EPCA Germany stands for long year expertise, in-depth knowledge, excellent service quality and understanding of automation processes. With EPCA Germany

More information

Automotive Industry Mechanical Engineering Hydraulics Locking Technology High-frequency Engineering Watch Industry Measurement and Test Equipment

Automotive Industry Mechanical Engineering Hydraulics Locking Technology High-frequency Engineering Watch Industry Measurement and Test Equipment Automotive Industry Mechanical Engineering Hydraulics Locking Technology High-frequency Engineering Watch Industry Measurement and Test Equipment Presentation Herbrig & Co GmbH precision FROM THE MUEGLITZ

More information

FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES

FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES ROTARy ROLLSCHERENMESSER SLITTER KNIvES UND AND ZUBEHÖR ACCESSORIES FÜR LÄNGSTEILANLAGEN FOR SLITTING LINES DIvISION METAL ABOUT US A long tradition signifies commitment. The history of our company can

More information

High Performance in Plastics

High Performance in Plastics ALBIS GROUP High Performance in Plastics E-CONDUCTIVE WEAR PROTECT MECHANICAL PLUS METALLIC EFFECT LIGHTING TAILOR-MADE ALCOM the system for innov ation. Since the founding of the company in 1961, ALBIS

More information

LIGHTING MAKING MORE OUT OF LIGHT

LIGHTING MAKING MORE OUT OF LIGHT LIGHTING MAKING MORE OUT OF LIGHT Light Diffusion WHO SAYS YOU CANNOT CALCULATE AN ATTRACTIVE AMBIENCE? ALCOM LD Beauty is hard to express in figures. Our developers have nevertheless succeeded in developing

More information

RECENT DEVELOPMENTS IN METAL LAMINATED TOOLING BY MULTIPLE LASER PROCESSING

RECENT DEVELOPMENTS IN METAL LAMINATED TOOLING BY MULTIPLE LASER PROCESSING RECENT DEVELOPMENTS IN METAL LAMINATED TOOLING BY MULTIPLE LASER PROCESSING Thomas Himmer*, Dr. Anja Techel*, Dr. Steffen Nowotny*, Prof. Dr. Eckhard Beyer*,** *Fraunhofer IWS, Winterbergstr. 28, D-01277

More information

Advanced Technology for the Wallpaper Industry. Create intelligent solutions.

Advanced Technology for the Wallpaper Industry. Create intelligent solutions. Advanced Technology for the Wallpaper Industry Create intelligent solutions. Highest Quality for an Optimum Efficiency. You want to know more: www.olbrich.com/wallcoverings Wallpaper Industry Advanced

More information

3D PRINTING BY PROTIQ. PRECISE. FAST. RELIABLE.

3D PRINTING BY PROTIQ. PRECISE. FAST. RELIABLE. Original Repariert LEFT OBJECT ZOOM SKALIERUNG SCALING 100 100 % % ABMESSUNGEN DIMENSIONS 55.655,6x x50.6 50,6 x 31.2 x 31,2mm mm WERTE USE THE FÜR PREDEFINED AUSWAHL VALUES ÜBERNEHMEN 3D PRINTING BY PROTIQ.

More information

QIROX Sensor systems. Top quality with each weld seam

QIROX Sensor systems. Top quality with each weld seam QIROX Sensor systems Top quality with each weld seam Precision work! Looking into space requires maximum optical precision. Just as your production processes with automated welding technology. Sensors

More information

Tool manufacturing BEIER

Tool manufacturing BEIER Tool manufacturing BEIER Paul Beier tool manufacturing expertise in development and manufacturing Contents Tool manufacturing...pp. 4/5 Special solutions... p. 6 Manufacturing...... p. 7 2 02 Tool manufacturing

More information

- sprue gate - pinpoint gate - fan gate - tunnel gate

- sprue gate - pinpoint gate - fan gate - tunnel gate Moulds for processing of thermosetting moulding compounds 1. Sprue and Runner Systems and Gates Sprues should have either a round cross-section or a rounded trapezoidal construction and must have well-polished

More information

Current status of Disk Lasers for sheetmetal cutting and welding

Current status of Disk Lasers for sheetmetal cutting and welding Current status of Disk Lasers for sheetmetal cutting and welding Iwan Papic, Gerry Jones TRUMPF Luton AILU 12 November 2008 Disk lasers for cutting and welding 12.11.2008 Presentation outline Disk laser

More information

Macadams. Heavy Duty Moulder FEATURES & BENEFITS. Superb results in moulding tin bread. Sheeting rollers are of non-stick nylon compound.

Macadams. Heavy Duty Moulder FEATURES & BENEFITS. Superb results in moulding tin bread. Sheeting rollers are of non-stick nylon compound. Macadams Heavy Duty Moulder FEATURES & BENEFITS Superb results in moulding tin bread Sheeting rollers are of non-stick nylon compound. Regulates moulding pressure and length of dough pieces. Technical

More information

Tongjie Precision Mould Mould Limited

Tongjie Precision Mould Mould Limited Tongjie Precision Mould Mould Limited Limited Focus on Precision Moulds, inserts and parts Precision mould Multi-cavity mould Injection molding Mould insert CNC machining Spare part machining EDM machining

More information

16E-04 Hot Runner Series Catalog

16E-04 Hot Runner Series Catalog 16E-4 Hot Runner Series Catalog Stabilize your Process CT-1-4_EN-Rev8 EN 6 / 218 16E-4 System Information Hot Runner System - Thrust Pad - / Bolt Down Manifold Illustrations simplified, schematically drawn

More information

JED Specification

JED Specification JED Specification 2008-08 Class: Engineering guidelines Class No.:07 Marking of WABCO products JED 341 Previous Edition Abbreviated Title 1988-12 Marking of WABCO products 852 003 410 4 1 Scope...3 2 Types

More information

Rapid Prototyping without re-working

Rapid Prototyping without re-working Rapid Prototyping without re-working The Layer Milling Center LMC produced by F. Zimmermann GmbH in Denkendorf combines the known RP-procedures with HSC milling. The CAM software WorkNC-LMP especially

More information

MEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905

MEREEN-JOHNSON. 400 Series Fixed Arbor Dip Chain Multiple Rip Saws. Setting the Standard Since 1905 MJ MEREEN-JOHNSON 400 Series Fixed Arbor Dip Chain Multiple Rip Saws Setting the Standard Since 1905 400 SERIES MULTIPLE RIP Setting the Standard Guaranteed Glue Joint Accuracy Minimal Maintenance High

More information

High Resolution Imaging for DMLS Inspection

High Resolution Imaging for DMLS Inspection High Resolution Imaging for DMLS Inspection Institute of Imaging and Computer Vision RWTH Aachen University Germany 1 Agenda The BIGS Research Project Image Acquisition Setup Application Example: Material

More information

STAMPING TECHNOLOGY - CLAMPING RAW PARTS

STAMPING TECHNOLOGY - CLAMPING RAW PARTS simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

whr Hossinger Kunststofftechnik GmbH

whr Hossinger Kunststofftechnik GmbH whr Hossinger Kunststofftechnik GmbH COMPETENCE Competence Projects Engineering Tooling Molding Innovation How Ideas Turn Into Products We are a creative and flexible development partner for exceptional

More information

Acoustic claddings and shrouds for power plants and other industries

Acoustic claddings and shrouds for power plants and other industries Acoustic claddings and shrouds for power plants and other industries www.bbm-akustik.de BBM Akustik Technologie Acoustic claddings and shrouds for power plants and other industries Acoustic claddings and

More information

Falzmarke Perfection in Metal InduStrIal EngraVIngS CnC MIllIng SCrEEn PrIntIng EdM ShEEt MEtal MaChInIng tool/mould design & ConStruCtIon

Falzmarke Perfection in Metal InduStrIal EngraVIngS CnC MIllIng SCrEEn PrIntIng EdM ShEEt MEtal MaChInIng tool/mould design & ConStruCtIon Perfection in Metal Industrial Engravings CNC Milling Screen Printing EDM Sheet Metal Machining Tool/Mould Design & Construction Flexibility, durability, diversity and virtually unlimited possibilities

More information

MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled

MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled MIG/MAG Welding Torch System ROBO WH 455 D ROBO WHPP 455 D liquid cooled C E R T I F DIN EN ISO 9001 Q M - S I Y E T S D E M BINZEL. The right welding torch for every job. The welding torches belonging

More information

1. T/T: 40% Deposit,30% upon T1 Sample,30% Balance before ship ment 2. L/C: irrevocable 100% L/C at sight. 1 Product Name Bicycle basket moulding

1. T/T: 40% Deposit,30% upon T1 Sample,30% Balance before ship ment 2. L/C: irrevocable 100% L/C at sight. 1 Product Name Bicycle basket moulding Our commitment to servicing our customers with quality product at competitive price and on-time delivery is backed by our continued investment in our equipment.our employees and in our systems. ABIS is

More information

COLD MOUNTING SYSTEM FAST, SIMPLE, EFFICIENT

COLD MOUNTING SYSTEM FAST, SIMPLE, EFFICIENT COLD MOUNTING SYSTEM FAST, SIMPLE, EFFICIENT SCAN-DIA COLD MOUNTING SYSTEM From the beginning of the company s history, SCAN-DIA has favoured cold mounting and developed the internationally known SCAN-DIA

More information

EC Test of welded Tubes. Edition 3 January 2003

EC Test of welded Tubes. Edition 3 January 2003 EC Test of welded Tubes Edition 3 Technological changes in the welding process are impacting on eddy current testing. In this article we describe new potential applications of eddy current testing in the

More information

Application Catalog. TruServices Punching Tools. Know-how for every application

Application Catalog. TruServices Punching Tools. Know-how for every application TruServices Punching Tools Application Catalog Know-how for every application Machine Tools/Power Tools Laser Technology/Electronics Medical Technology Preface Particularly sophisticated machining problems

More information

Measuring Software Customer Care

Measuring Software Customer Care Creating Tool Performance A member of the UNITED GRINDING Group TOOL MACHINING Grinding Eroding Laser Measuring Software Customer Care WALTER and EWAG, as system and solution suppliers for complete tool

More information

STAMPING TECHNOLOGY - CLAMPING RAW PARTS

STAMPING TECHNOLOGY - CLAMPING RAW PARTS simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis

More information

Operating instructions. Fine boring head Ø3-88 with digital display

Operating instructions. Fine boring head Ø3-88 with digital display Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety

More information