NDT KONFERANSEN ZENOVIEA VOROSCIUC

Size: px
Start display at page:

Download "NDT KONFERANSEN ZENOVIEA VOROSCIUC"

Transcription

1 NDT KONFERANSEN 2011 ZENOVIEA VOROSCIUC

2 Short about FMC Expectations Requirements New Challenges. New Solutions. 2

3 FMC Technologies Subsea Eastern ~ 150% growth from MUSD Revenue Employees ER Revenue 1730 MUSD Revenue 1550 MUSD Revenue 2045 MUSD ER Employees Revenue 1750 MUSD Revenue 1000 MUSD Revenue 1370 MUSD 3200 Employees 3500 Employees Revenue 900 MUSD 2400 Employees Revenue 349 MUSD 1650 Employees 1450 Employees 1300 Employees 3

4 4

5 5

6 Subsea production system building blocks 6

7 Enhanced Horizontal Tree (EHXT) Features: 5 x 2 10,000 & 15,000 psi Modular design based on EVXT and EHXT Most cost-effective and reliable Reduction in installation time 7

8 Manifold Systems Water depths to 10,000 ft Pressures to 15,000 psi Temperatures to 350F Sizes from 6 to 30 diameter Retrievable pigging loops Foundations for all soil conditions Multi-phase flow meters Optional manifold-mounted SCMs and chokes 8

9 Completion & Workover Riser Systems 5 15K C&WO riser system World s first 15K open water C&WO riser 5 10K monobore C&WO riser system 4 x 2 10K dual tubing C&WO riser system (rental) Riser systems can be used for light well intervention on both vertical and horizontal trees 9

10 10

11 Subsea Processing Systems Solids Separator Cooler Multi-Well Water Injection Pump Separator Tank Liquid Pump HV Transformer Compressor Single Well Ultrasonic Level Indicator Control Valve Control Module 11

12 Små tuer. 12

13 Manifold Systems 13

14 Manifold Systems 14

15 Manifold Systems 15

16 Manifold Systems 16

17 små tuer velter stort lass Piping with visual indications: Lack of penetration, excessive penetration. 17

18 små tuer velter stort lass 18

19 små tuer velter stort lass 19

20 små tuer velter stort lass 20

21 små tuer velter stort lass 21

22 22

23 Short about FMC Expectations Requirements New Solutions. 23

24 Trust Measured Confidence 24

25 25

26 New focus Culture Environment Thinking Action 26

27 Short about FMC Expectations Requirements New Solutions. 27

28 New focus: NDT Quality= Conformance to the Requirements NDT Conformance to the Requirements=Quality 28

29 APPLICATIONS OF NDT METHODS. Control of weld quality (surface and volumetric). Control of forging and casting quality. metalurgical investigation of materials structure. Detection of bore hole eccentricity; Rate of fatigue crack growth; Investigation of corrosion rates; 29

30 REQUIREMENTS ULTRASONIC EXAMINATION ASME V Article 4 and 5 RADIOGRAPHIC EXAMINATION ASME V Article 2 VISUAL EXAMINATION ASME V Article 9 MAGNETC PARTICLE EXAMINATION ASME V Article 7 LIQUID PENETRANT EXAMINATION ASME V Article 6 EDDY CURRENT EXAMINATION ASME V Article 8 POSITIVE MATERIAL IDENTIFICATION NORSOK M-601 LEAK TESTING ASME V Article 10 Other standards used: EN; NORSOK; DNV; API; Customer Specifications. 30

31 REQUIREMENTS-ULTRASONIC INSPECTION Ultrasonic Examination is the preferred method for the welds with material thicknesses above 40 mm. Subsea Equipments are designed to allow 100% surface and volumetric inspection. Scanning distances full skip or halh skip are calculated based on the material thickness, the quality of the materials and bevels configuration. 31

32 REQUIREMENTS-ULTRASONIC INSPECTION Calibration blocks are used for sensitivity setting. Calibration blocks are produced in the same conditions as the welds to be tested. Artificial reflectors as side drilled holes, flat botommed holes and notches are machined at different depths from surfaces to simulate real defects. For welds with complicated configuration: dissimilar materials (22Cr, 25Cr, filer material- Inconel based, butter welds, internal cladding) the scanning distances are calculated and taked in consideration for each particular case. 32

33 REQUIREMENTS-ULTRASONIC INSPECTION Calibration block 33

34 REQUIREMENTS-ULTRASONIC INSPECTION Calibration block- Weld deposit. 34

35 REQUIREMENTS-RADIOGRAPHIC EXAMINATION Radiographic Examination is the recommended method for the welds in material thicknesses below 40mm to detect volumetric discontinuities and also surface discontinuities. Is applicable for but-welds, filet welds (where possible) and critical areas of casted components. Subsea equipments are designed to allow exposure geometry and to achieve examination parameters: sensitivity, density, Ug requirements. The radiographs are stored in special conditions, and represent quality records. 35

36 REQUIREMENTS- SURFACE EXAMINATION Visual is the first examination applicable and is related to the followings: dimensions, surface roughness, surface status (painting, coating), visual discontinuities. Direct visual and remote visual examination are used for subsea equipments. Ferromagnetic materials : welds, forgings, castings are tested using magnetic particle techniques in order to detect surface discontinuities. Magnetic Particle Examination is applicable for structural welds, forged and casted parts in final machining conditions, fasteners, etc. 36

37 REQUIREMENTS- SURFACE EXAMINATION Nonferromagnetic maerials are tested using dye penetrant techniques to detect discontinuities open to the surface. Dye Penetrant Examination is applicable for CR butter welds, CR cladded surfaces, fasteners, welds in nonferromagnetic materials, etc 37

38 REQUIREMENTS-EDDY CURRENT Eddy current Examination is applied to detect: corrosion, erosion, cracking and other changes in tubing, Discontinuities located in near surface layer outside and inside of seamless pipes. 38

39 REQUIREMENTS-POSITIVE MATERIAL IDENTIFICATION. Positive Material Identification is used on base materials and welds to provide information regarding the chemistry of the material. The examination is applicable for: piping systems in stainless steel and Ni-base alloys to be installed subsea. Inconel based weld overlay. 39

40 REQUIREMENTS-LEAK TEST AND PRESSURE TEST These methods are applicable for piping system, pipelines, storage tanks, etc. Helium leaking test is an efficient method of evaluation for EB welds without full penetration. 40

41 Short about FMC Expectations Requirements New Challenges. New Solutions. 41

42 NDT: SCIENCE, SKILL AND ART NDT is becoming a vital factor in the effective conduct of: research, development, design and manufacturing programs. 42

43 NDT- SCIENCE, SKILL, ART. The factors that influences the successful use of NDE mehods: high level of understanding of the process and the limits, clear definition of the test problem, adequate reference standards, realistic acceptance standards, qualification of operators, adequate equipments, practical test specifications and procedures, detailed test records and frequent testing where required,, 43

44 NDT- SCIENCE, SKILL, ART. The result consists in: High Detectability. Accuracy in discontinuity estimation. 44

45 NDT- SCIENCE, SKILL, ART.. Amplitude sizing technique; (a) small planar discontinuities; (b) rough planar discontinuity; (c) volumetric discontinuity; (d) oriented discontinuity; (e) Signal amplitude versus discontinuity size. 45

46 NDT- SCIENCE, SKILL, ART. 46

47 NDT- NDT- SCIENCE, SKILL, ART. 47

48 NDT- SCIENCE, SKILL, ART. 48

49 NDT- Skill DIGITAL RADIOGRAPHY (DR) 49

50 NDT- Skill Real Time Radiography. 50

51 NDT- Skill EDDY CURRENT 51

52 NDT- Skill 52

53 NDT- Skill VISUAL EXAMINATION. 53

54 NDT- SCIENCE, SKILL, ART. Thickness Measurement-In service 54

55 NDT- SCIENCE, SKILL, ART. Thickness Measurement-In service. 55

56 NDT- SCIENCE, SKILL, ART. GHIDED WAVES-In service 56

57 NDT- SCIENCE, SKILL, ART. GHIDED WAVES-In servi 57

58 58

EMAT Application on Incoloy furnace Tubing Ramamohan Reddy M (ASNT Level III UT, PCN Level III UT,PAUT&TOFD)

EMAT Application on Incoloy furnace Tubing Ramamohan Reddy M (ASNT Level III UT, PCN Level III UT,PAUT&TOFD) EMAT Application on Incoloy furnace Tubing By Ramamohan Reddy M (ASNT Level III UT, PCN Level III UT,PAUT&TOFD) Outlines 1. Introduction EMAT 2. EMAT- Ultrasound waves 3. EMAT-Surface waves 4. EMAT-Guided

More information

Introduction To NDT. BY: Omid HEIDARY

Introduction To NDT. BY: Omid HEIDARY Introduction To NDT BY: Omid HEIDARY NDT Methods Penetrant Testing Magnetic Particle Testing Eddy Current Testing Ultrasonic Testing Radiographic Testing Acoustic Emission Infrared Testing Visual Testing

More information

The Battle of Carbon Steel

The Battle of Carbon Steel More info ab The Battle of Carbon Steel Advantages of Eddy Current Array over Magnetic Particle and Penetrant Testing for Inspecting the Surface of Carbon Steel Welds Terence Burke Product Application

More information

S. GURESH 4 JAN 2017 S. JOHNSON 4 JAN 2017

S. GURESH 4 JAN 2017 S. JOHNSON 4 JAN 2017 PAGE 2 OF 15 1.0 PURPOSE This Inspection Method describes the methodology for Ultrasonic Examination using manual and semi-automatic techniques by the contact and immersion longitudinal wave method and

More information

Pre Conference Workshop on Advanced Digital imaging

Pre Conference Workshop on Advanced Digital imaging Pre Conference Workshop on Advanced Digital imaging Uwe Zscherpel, uwez@bam.de BAM Federal Institute for Materials Research and Testing, Division 8.3 Radiological Methods, Berlin, Germany 1 Content: 1.

More information

Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)

Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS

More information

VD3-71 universal eddy current flaw detector application for field inspection of aeronautical engineering

VD3-71 universal eddy current flaw detector application for field inspection of aeronautical engineering VD3-71 universal eddy current flaw detector application for field inspection of aeronautical engineering Introduction. The Document reviewed by http://engineermind.com/ By ahmed@engineermind.com The need

More information

Inspection Approaches & Experience. for Inspecting Challenging Subsea Assets

Inspection Approaches & Experience. for Inspecting Challenging Subsea Assets Subsea Malaysia 2015 Inspection Approaches & Experience for Inspecting Challenging Subsea Assets Jason Tong Regional Sales Engineer, Innospection j.tong@innospection.com Subsea Malaysia 2015 CONTENT -

More information

Easy Ultrasonic Phased Array Inspection of Corrosion - Resistant Alloys and Dissimilar Weld Materials

Easy Ultrasonic Phased Array Inspection of Corrosion - Resistant Alloys and Dissimilar Weld Materials Multimedia Application Notes Easy Ultrasonic Phased Array Inspection of Corrosion - Resistant Alloys and Dissimilar Weld Materials Many industries increasingly use austenitic welds and welds containing

More information

Standard Horizontal Subsea Trees. Integrated offshore offering for reliable, high-quality, and capitalefficient

Standard Horizontal Subsea Trees. Integrated offshore offering for reliable, high-quality, and capitalefficient Standard Horizontal Subsea Trees Integrated offshore offering for reliable, high-quality, and capitalefficient performance Standard Horizontal Subsea Trees Through standardized processes, common core components,

More information

REDUCING DEEPWATER PIPELINE INSPECTION COSTS

REDUCING DEEPWATER PIPELINE INSPECTION COSTS REDUCING DEEPWATER PIPELINE INSPECTION COSTS WHITE PAPER INTRODUCTION Inspecting a deepwater pipeline is extremely challenging. One problem might be that it lies more than 2,000 m (6,500 ft.) subsea, giving

More information

Welding Inspection Non-Destructive Testing Course Reference WIS 5

Welding Inspection Non-Destructive Testing Course Reference WIS 5 Welding Inspection Non-Destructive Testing Course Reference WIS 5 Non Destructive Testing A welding inspector should have a working knowledge of NDT methods and their applications, advantages and disadvantages.

More information

LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves

LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality

More information

Heat Exchanger & Boiler Tube Inspection Techniques

Heat Exchanger & Boiler Tube Inspection Techniques Overview For the in-service inspection of ferromagnetic, non-ferromagnetic and fin-fan tubes, the following advanced techniques offer high defect detection capabilities and accurate defect analysis: Multiple

More information

NDT-PRO Services expands service offering

NDT-PRO Services expands service offering NDT-PRO Services expands service offering NDT-PRO Services announced the formal release of two advanced NDT methods, Phased Array (including TOFD) and Eddy Current. What are they and where are the used?

More information

By: Derek Watson and Lee Robins, Tracerco, UK

By: Derek Watson and Lee Robins, Tracerco, UK TRACERCO DISCOVERY SUBSEA CT (COMPUTED TOMOGRAPHY) HELPS TO OPTIMISE YOUR OPERATIONAL PIGGING CAMPAIGN AND VERIFY ILI RESULTS: TECHNOLOGY FOR PIPELINE INTEGRITY AND FLOW ASSURANCE VISUALISATION By: Derek

More information

Inspection Approaches & Experience. for Inspecting Challenging Subsea Assets

Inspection Approaches & Experience. for Inspecting Challenging Subsea Assets Inspection Approaches & Experience for Inspecting Challenging Subsea Assets Inspection Approaches & Experience for Inspecting Challenging Subsea Assets Andreas Boenisch Group Managing Director Innospection

More information

Latest Developments for Pipeline Girth Welds using 3D Imaging Techniques. Novel Construction Meeting Jan van der Ent March 2016, Geneva

Latest Developments for Pipeline Girth Welds using 3D Imaging Techniques. Novel Construction Meeting Jan van der Ent March 2016, Geneva Latest Developments for Pipeline Girth Welds using 3D Imaging Techniques Novel Construction Meeting Jan van der Ent March 2016, Geneva 1 Content of presentation Standard A(UT) inspection What do we expect

More information

Application of SLOFEC and Laser Technology for Testing of Buried Pipes

Application of SLOFEC and Laser Technology for Testing of Buried Pipes 19 th World Conference on Non-Destructive Testing 2016 Application of SLOFEC and Laser Technology for Testing of Buried Pipes Gerhard SCHEER 1 1 TMT - Test Maschinen Technik GmbH, Schwarmstedt, Germany

More information

Module 4 Design for Assembly IIT BOMBAY

Module 4 Design for Assembly IIT BOMBAY Module 4 Design for Assembly Lecture 8 Case Studies - IV Instructional objectives The objective of this lecture is to exhibit how real components are designed in industry following some of the principles

More information

MultiScan MS Tube Inspection System. Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound

MultiScan MS Tube Inspection System. Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound MultiScan MS 5800 Tube Inspection System Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound 920-107 MultiScan MS 5800 E Tube Inspection with Eddy Current Condensers

More information

Testing of Buried Pipelines Using Guided Waves

Testing of Buried Pipelines Using Guided Waves Testing of Buried Pipelines Using Guided Waves A. Demma, D. Alleyne, B. Pavlakovic Guided Ultrasonics Ltd 16 Doverbeck Close Ravenshead Nottingham NG15 9ER Introduction The inspection requirements of pipes

More information

MultiScan MS Tube Inspection System. Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound

MultiScan MS Tube Inspection System. Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound MultiScan MS 5800 Tube Inspection System 920-107 Multi-technology System Eddy Current Magnetic Flux Leakage Remote Field IRIS Ultrasound MultiScan MS 5800 E Tube Inspection with Eddy Current Condensers

More information

SAMAMAT FLOW CONTROL L.L.C.

SAMAMAT FLOW CONTROL L.L.C. SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot

More information

SAFER, SMARTER, GREENER

SAFER, SMARTER, GREENER OIL & GAS Introduction to Subsea Production Systems 04 Christmas Tree (XT) Systems August 2015 DNV GL 2013 August 2015 SAFER, SMARTER, GREENER Christmas Tree Systems Onshore tree Offshore tree Subsea tree

More information

Pipeline Research Council International, Inc.

Pipeline Research Council International, Inc. Pipeline Research Council International, Inc. Technology Development for Pipeline Integrity Current Features & Coming Attractions API 2012 Pipeline Conference & Cybernetics Symposium Phoenix, AZ April

More information

Pipeline & Specialty Services (P&SS)

Pipeline & Specialty Services (P&SS) Pipeline & Specialty Services (P&SS) A Pipeline Inspection Case Study: Design Improvements on a New Generation UT In-line Inspection Crack Tool Mark Slaughter Global Product Line Manager Pipeline & Specialty

More information

Eddy Current Array for Aerospace

Eddy Current Array for Aerospace NANDT Conference 2017 Eddy Current Array for Aerospace Presented by Richard Nowak Olympus Product Manager NDT Material provided by Ghislain Morais, OSSA Eddy Current Array ECA Instrument OmniScan ECA:

More information

The Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing

The Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing The Evolution & Future of API Coiled Tubing Standards Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing API Overview Presentation Outline Resource Group on Coiled Tubing

More information

AATC PRESENTATION INVESTMENT CASTING PROCESS (2 OF 3 PRESENTATIONS REVISION 2014_0429) AATC, Inc W. Catalina Dr. Phoenix, AZ USA

AATC PRESENTATION INVESTMENT CASTING PROCESS (2 OF 3 PRESENTATIONS REVISION 2014_0429) AATC, Inc W. Catalina Dr. Phoenix, AZ USA AATC PRESENTATION INVESTMENT CASTING PROCESS (2 OF 3 PRESENTATIONS REVISION 2014_0429) 1 Wax Injection & Pattern Assembly Wax Injection: A wax pattern is made by injecting liquid wax into an aluminum mold.

More information

INVESTIGATION OF IMPACT DAMAGE OF CARBON FIBER- RAINFORCED PLASTIC (CFRP) BY EDDY CURRENT NON- DESTRUCTIVE TESTING

INVESTIGATION OF IMPACT DAMAGE OF CARBON FIBER- RAINFORCED PLASTIC (CFRP) BY EDDY CURRENT NON- DESTRUCTIVE TESTING International Workshop SMART MATERIALS, STRUCTURES & NDT in AEROSPACE Conference NDT in Canada 2011 2-4 November 2011, Montreal, Quebec, Canada INVESTIGATION OF IMPACT DAMAGE OF CARBON FIBER- RAINFORCED

More information

AA&S Conference 2018 Eddy Current Array for Aircraft

AA&S Conference 2018 Eddy Current Array for Aircraft AA&S Conference 2018 Eddy Current Array for Aircraft Presented by Graham Maxwell Olympus Australia NDT Key Account Manager Material provided by Ghislain Morais Olympus NDT Canada Eddy Current Array ECA

More information

Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection

Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection Ik-Keun PARK 1,a, Yong-Kwon KIM 2,b, Sae-Jun PARK

More information

Learn more at

Learn more at Deepwater Riser System Challenges and Issues David Walters 2H Offshore Presentation Objectives Review riser system options Update on current industry status Highlight key issues Discuss current industry

More information

BASICS ULTRASONIC TESTING METHOD. -Dr.Oruganti Prabhakar Proprietor-OP-TECH

BASICS ULTRASONIC TESTING METHOD. -Dr.Oruganti Prabhakar Proprietor-OP-TECH BASICS ULTRASONIC TESTING METHOD -Dr.Oruganti Prabhakar Proprietor-OP-TECH INTRODUCTION Ultrasonic Testing (UT) is done by first generating high frequency acoustic waves at the outer surface of the component

More information

Phased Array UT Application For Boiler Tube Inspection in Manufacturing And In-Service Anandamurugan S 1, Siva Sankar Y 2

Phased Array UT Application For Boiler Tube Inspection in Manufacturing And In-Service Anandamurugan S 1, Siva Sankar Y 2 More Info at Open Access Database www.ndt.net/?id=15156 Phased Array UT Application For Boiler Tube Inspection in Manufacturing And In-Service Anandamurugan S 1, Siva Sankar Y 2 1 GE Inspection Technologies,

More information

The Application of TOFD Technique on the Large Pressure Vessel

The Application of TOFD Technique on the Large Pressure Vessel 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China The Application of TOFD Technique on the Large Pressure Vessel Yubao Guangdong Special Equipment Inspection Institute Floor

More information

PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow

PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,

More information

DIFFICULT TO PIG AND TO INSPECT OFFSHORE PIPES

DIFFICULT TO PIG AND TO INSPECT OFFSHORE PIPES DIFFICULT TO PIG AND TO INSPECT OFFSHORE PIPES K. Reber, Innospection Germany GmbH, Stutensee, Germany S. Hartmann, Innospection Ltd., UK A. Boenisch, Innospection Ltd., UK Introduction When it comes to

More information

Pipeline Technology Conference 2010

Pipeline Technology Conference 2010 THRESHOLDS, ACCURACIES AND RESOLUTION: QUANTITATIVE MEASUREMENT AND ITS ADVANTAGES FOR METAL LOSS INSPECTION A. Barbian, M. Beller, A. Hugger, C. Jäger, A. Pfanger NDT Systems & Services Stutensee, Germany

More information

Ultrasonic sensors in subsea oil & gas production current use and opportunities

Ultrasonic sensors in subsea oil & gas production current use and opportunities Ultrasonic sensors in subsea oil & gas production current use and opportunities By Bjørn Stevning Hole Senior Product Engineer, TechnipFMC 5/31/2018 Page footer text 1 What is ultrasound and how can ultrasound

More information

D DAVID PUBLISHING. Eddy Current Test for Detection of Foreign Material using Rotating Probe. 2. Theory. 1. Introduction

D DAVID PUBLISHING. Eddy Current Test for Detection of Foreign Material using Rotating Probe. 2. Theory. 1. Introduction Journal of Mechanics Engineering and Automation 6 (2016) 379-383 doi: 10.17265/2159-5275/2016.07.009 D DAVID PUBLISHING Eddy Current Test for Detection of Foreign Material using Rotating Probe Houng Kun

More information

PHASED ARRAYS FOR SMALL DIAMETER, THIN-WALLED PIPING INSPECTIONS

PHASED ARRAYS FOR SMALL DIAMETER, THIN-WALLED PIPING INSPECTIONS PHASED ARRAYS FOR SMALL DIAMETER, THIN-WALLED PIPING INSPECTIONS Michael Moles 1 and Ed Ginzel 2 1. Senior Technology Manager, Olympus NDT, 48 Woerd Avenue, Waltham, MA, USA 02543. Tel: +1 416 831 4428,

More information

2019 CALL FOR ABSTRACTS

2019 CALL FOR ABSTRACTS 2019 CALL FOR ABSTRACTS Oil, Gas, and Chemical Industry Sectors Covered: Upstream (Drilling, Sub Sea, Production Systems, Integrity Management) Midstream (Pipelines, Terminals) Downstream (Refining, Chemical

More information

Curved arrays for improved horizontal sizing in small pipe welds

Curved arrays for improved horizontal sizing in small pipe welds INSIGHT published by the British Institute of Non-Destructive Testing For more papers of this publication click: www.ndt.net/search/docs.php3?mainsource=39 PHASED ARRAYS DOI: 10.1784/insi.2008.50.5.253

More information

Magnetic Eddy Current (MEC) Inspection Technique

Magnetic Eddy Current (MEC) Inspection Technique Introduction Eddy Current Testing (ECT) is a well established technology for the inspection of metallic components for surface breaking flaws. It is used for component testing in the aviation and automotive

More information

Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.

Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings. 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)

More information

Film Replacement in Radiographic Weld Inspection The New ISO Standard

Film Replacement in Radiographic Weld Inspection The New ISO Standard BAM Berlin Film Replacement in Radiographic Weld Inspection The New ISO Standard 17636-2 Uwe Ewert, Uwe Zscherpel, Mirko Jechow Requests and information to: uwez@bam.de 1 Outline - The 3 essential parameters

More information

Improved Inspection of CRA-Clad Pipeline Girth Welds with the Use of Accessible Advanced Ultrasonic Phased-Array Technology

Improved Inspection of CRA-Clad Pipeline Girth Welds with the Use of Accessible Advanced Ultrasonic Phased-Array Technology Improved Inspection of CRA-Clad Pipeline Girth Welds with the Use of Accessible Advanced Ultrasonic Phased-Array Technology André Lamarre, Olympus Scientific Solutions Americas 11th European Conference

More information

OPTIFLUX 5000 Technical Datasheet

OPTIFLUX 5000 Technical Datasheet OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech

More information

In-Line EMAT Ultrasonic Weld Inspection for ERW Tube Mill Using Guided Ultrasonic Waves

In-Line EMAT Ultrasonic Weld Inspection for ERW Tube Mill Using Guided Ultrasonic Waves In-Line EMAT Ultrasonic Weld Inspection for ERW Tube Mill Using Guided Ultrasonic Waves Jeffrey S. Monks Innerspec Technologies, Inc. 4004 Murray Place Lynchburg, VA 24501 Phone- 434-948-1306 Fax-434-948-1313

More information

Fastener Hole Crack Detection Using Adjustable Slide Probes

Fastener Hole Crack Detection Using Adjustable Slide Probes Fastener Hole Crack Detection Using Adjustable Slide Probes General The guidelines for the adjustable sliding probes are similar to the fixed types, therefore much of the information that is given here

More information

Subsea Integrity and Efficiency Conference

Subsea Integrity and Efficiency Conference SUBSEA INTEGRITY & EFFICIENCY CONFERENCE 2015 Subsea Integrity and Efficiency Conference - 2015 Flexible Riser Integrity Assessment with Advanced MEC-FIT Technique Andreas Boenisch a.boenisch@innospection.com

More information

Using Critical Zone Inspection and Response Monitoring To Prove Riser Condition. M Cerkovnik -2H Offshore

Using Critical Zone Inspection and Response Monitoring To Prove Riser Condition. M Cerkovnik -2H Offshore Using Critical Zone Inspection and Response Monitoring To Prove Riser Condition M Cerkovnik -2H Offshore Agenda 1. Introduction 2. High level methodology 3. Verifying condition 4. Defining requirements

More information

Long Range Ultrasonic Testing - Case Studies

Long Range Ultrasonic Testing - Case Studies More info about this article: http://www.ndt.net/?id=21145 Prawin Kumar Sharan 1, Sheethal S 1, Sri Krishna Chaitanya 1, Hari Kishore Maddi 1 1 Sievert India Pvt. Ltd. (A Bureau Veritas Company), 16 &

More information

OPTIFLUX 5000 Technical Datasheet

OPTIFLUX 5000 Technical Datasheet OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech

More information

Fig.2: Scanner VistaScan for image plates

Fig.2: Scanner VistaScan for image plates RADIOGRAPHIC INSPECTION OF WELDINGS BY DIGITAL SENSORS H. Thiele, H.-J. Friemel RADIS GmbH, Johanniskirchen, Germany Abstract: The newly available digital sensors for radiographic inspection are suitable

More information

Detecting Stress Corrosion Cracking with Eddy Current Array Technology Cracking

Detecting Stress Corrosion Cracking with Eddy Current Array Technology Cracking Detecting Stress Corrosion Cracking with Eddy Current Array Technology Cracking Emilie Peloquin, : emilie.peloquin@olympus ossa.com Advanced Technical Support Team Lead Americas Olympus Scientific Solutions

More information

New portable eddy current flaw detector and application examples

New portable eddy current flaw detector and application examples 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic New portable eddy current flaw detector and application examples More Info at Open Access Database

More information

ASME BPVC.V-2015 SECTION V ASME Boiler and Pressure Vessel Code An International Code. N on de st ruct iv e Exa min a t ion

ASME BPVC.V-2015 SECTION V ASME Boiler and Pressure Vessel Code An International Code. N on de st ruct iv e Exa min a t ion ASME BPVC.V-2015 SECTION V 2015 ASME Boiler and Pressure Vessel Code An International Code N on de st ruct iv e Exa min a t ion AN INTERNATIONAL CODE 2015 ASME Boiler & Pressure Vessel Code 2015 Edition

More information

RISK & RELIABILITY BASED FITNESS FOR SERVICE (FFS) ASSESSMENT FOR SUBSEA PIPELINES By. Ir. Muhd Ashri Mustapha & Dr. Yong BaI.

RISK & RELIABILITY BASED FITNESS FOR SERVICE (FFS) ASSESSMENT FOR SUBSEA PIPELINES By. Ir. Muhd Ashri Mustapha & Dr. Yong BaI. RISK & RELIABILITY BASED FITNESS FOR SERVICE (FFS) ASSESSMENT FOR SUBSEA PIPELINES By Ir. Muhd Ashri Mustapha & Dr. Yong BaI. June 2011 Hannover All rights reserved. No part of this document may be reproduced,

More information

Eddy Current Modelling for Fasteners Inspection in Aeronautic

Eddy Current Modelling for Fasteners Inspection in Aeronautic ECNDT 2006 - Tu.4.4.5 Eddy Current Modelling for Fasteners Inspection in Aeronautic Séverine PAILLARD, Grégoire PICHENOT, CEA Saclay, Gif-sur-Yvette, France Marc LAMBERT, L2S (CNRS-Supélec-UPS), Gif-sur-Yvette

More information

AUTOMATED EDDY CURRENT DETECTION OF FLAWS IN SHOT-PEENED

AUTOMATED EDDY CURRENT DETECTION OF FLAWS IN SHOT-PEENED AUTOMATED EDDY CURRENT DETECTION OF FLAWS IN SHOT-PEENED TITANIUM MATERIALS INTRODUCTION Ray T. Ko and Stephen J. Pipenberg Automated Inspection Systems Systems Research Laboratories, Inc. 2800 Indian

More information

Leading Edge Technology. Advanced Corrosion Technologies & Training

Leading Edge Technology. Advanced Corrosion Technologies & Training Leading Edge Technology Advanced Corrosion Technologies & Training Leading Edge Technology About ACTT Advanced Corrosion Technologies & Training, LLC (ACTT) exists to detect corrosion before it becomes

More information

Riserless Subsea P&A. Deepwater Decommissioning Workshop 2016 W I L D W E L L C O N T R O L S U B S E A I N T E R V E N T I O N

Riserless Subsea P&A. Deepwater Decommissioning Workshop 2016 W I L D W E L L C O N T R O L S U B S E A I N T E R V E N T I O N Riserless Subsea P&A Deepwater Decommissioning Workshop 2016 W I L D W E L L C O N T R O L S U B S E A I N T E R V E N T I O N 7 Series S U B S E A I N T E R V E N T I O N 7 Series Nominal Bore Size 7.375

More information

Automated Ultrasonic Inspection for Pipeline Girth Welds

Automated Ultrasonic Inspection for Pipeline Girth Welds Automated Ultrasonic Inspection for Pipeline Girth Welds Sebastien Rigault PipeWizard - Product Mgr. Bob Peck EMEA NDT Business Development Mgr. Pipeline Girth Weld Inspection: In the last several years

More information

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does

More information

Overview. Corrosion detection improvement of oil and gas pipelines with industrial radiography method by using image processing.

Overview. Corrosion detection improvement of oil and gas pipelines with industrial radiography method by using image processing. detection improvement of oil and gas pipelines with industrial radiography method by using image processing Alireza Karimian (Engineering faculty of Isfahan university, Isfahan,, Iran ) Sepideh Yazdani

More information

ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals

ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals INTERNATIONAL STANDARD ISO 13628-5 Second edition 2009-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals Industries du pétrole et du

More information

Sensorlink Corrosion monitoring on welds. Subsea Controls Down Under ISO 9001:2008 certified IECEx certified

Sensorlink Corrosion monitoring on welds. Subsea Controls Down Under ISO 9001:2008 certified IECEx certified Sensorlink Corrosion monitoring on welds Subsea Controls Down Under 2018 Jan-Tore Ervik, CMO Jan-tore.ervik@sensorlink.no ISO 9001:2008 certified IECEx certified 2 Outline Sensorlink Motivations and applications

More information

MARS. Multiple application reinjection system

MARS. Multiple application reinjection system MARS Multiple application reinjection system Unique Technology. Universal Application. Historically, installing processing hardware on existing subsea trees has been a high-risk and costly activity due

More information

PROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING

PROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING PROCHEM Product solutions for a world of difference PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES HYDRAULIC The World of Prochem PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES

More information

Corrosion detection under pipe supports using EMAT Medium Range Guided Waves

Corrosion detection under pipe supports using EMAT Medium Range Guided Waves 19 th World Conference on Non-Destructive Testing 2016 Corrosion detection under pipe supports using EMAT Medium Range Guided Waves Victor GARCIA 1, Carlos BOYERO 1, Jesus Antonio JIMENEZ GARRIDO 1 1 Innerspec

More information

Predictive Subsea Integrity Management: Effective Tools and Techniques

Predictive Subsea Integrity Management: Effective Tools and Techniques Predictive Subsea Integrity Management: Effective Tools and Techniques The Leading Edge of Value-Based Subsea Inspection 1 st November Aberdeen 2017 www.astrimar.com Background Low oil price having major

More information

Subsea Asset Integrity. Matthew Kennedy

Subsea Asset Integrity. Matthew Kennedy Subsea Asset Integrity Matthew Kennedy matthew.kennedy@1csi.uk 1 Typical Asset Integrity Cycle Mitigation, Intervention and Repair. Risk Assessment and IM Planning Support Engineering support during anomaly

More information

PORTABLE EDDY CURRENT FLAW DETECTOR VD3-81 EDDYCON

PORTABLE EDDY CURRENT FLAW DETECTOR VD3-81 EDDYCON PORTABLE EDDY CURRENT VD3-81 EDDYCON CE MARKING EN 13860-1 Compliant EN 13860-2 Compliant www.ndt.com.ua 2 PURPOSE ADVANTAGES DISTINCTIVE FEATURES TECHNICAL SPECIFICATION AND SERVICE FUNCTIONS OF THE INSTRUMENT

More information

DACON INSPECTION SERVICES I MFL INSPECTION OF PIPELINES

DACON INSPECTION SERVICES I MFL INSPECTION OF PIPELINES I MFL INSPECTION OF PIPELINES DACON AND INLINE INSPECTION Dacon well-known for pipeline inspection solutions using UT, MFL and LRUT UT tools provide unrivaled inspection accuracy compared to MFL Wide variety

More information

New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines

New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines A. Barbian 1, M. Beller 1, F. Niese 2, N. Thielager 1, H. Willems 1 1 NDT Systems & Services

More information

BALANCE FIELD ELECTROMAGNETIC TECHNIQUE INSPECTION REPORT OF THE 8_INCH_1260_FITTING (HA-2/1200 BLOCK) TESTEX, INC. TESTED: JANUARY 9, 2019

BALANCE FIELD ELECTROMAGNETIC TECHNIQUE INSPECTION REPORT OF THE 8_INCH_1260_FITTING (HA-2/1200 BLOCK) TESTEX, INC. TESTED: JANUARY 9, 2019 STATE OF THE ART PRODUCTS & SERVICES FOR NON-DESTRUCTIVE TESTING BALANCE FIELD ELECTROMAGNETIC TECHNIQUE INSPECTION REPORT OF THE 8_INCH_1260_FITTING (HA-2/1200 BLOCK) AT IN BY TESTEX, INC. TESTED: JANUARY

More information

NON DESTRUCTIVE TESTING 2 MARK QUESTION & ANSWERS UNIT I

NON DESTRUCTIVE TESTING 2 MARK QUESTION & ANSWERS UNIT I NON DESTRUCTIVE TESTING 2 MARK QUESTION & ANSWERS UNIT I 1.What do you mean by Non-Destructive Testing (NDT)? Inspecting or testing the materials and components in such a way that allows the materials

More information

DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing

DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing DE027 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Wellhead and x-mas tree is the main equipment for oil production, water

More information

Pipeline Girth Weld Inspections using Ultrasonic Phased Arrays Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel

Pipeline Girth Weld Inspections using Ultrasonic Phased Arrays Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel Pipeline Girth Weld Inspections using Ultrasonic Phased Arrays Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel Abstract: Automated ultrasonics (AUT) is more reliable, faster, has better detection of

More information

World Class Fabrication and Machining Parts to Finished Assemblies

World Class Fabrication and Machining Parts to Finished Assemblies - Woman Owned Small Business - World Class Fabrication and Machining Parts to Finished Assemblies FABRICATION MACHINING POWDER COATING WET PAINTING PLATE PROCESSING WELDING FABRICATION MACHINING POWDER

More information

Flash-Radiography Instead of Traditional Radiography with Intermediate Carriers of Information

Flash-Radiography Instead of Traditional Radiography with Intermediate Carriers of Information 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic More Info at Open Access Database www.ndt.net/?id=16577 Flash-Radiography Instead of Traditional

More information

TESTING OF BURIED PIPES BY SLOFEC TECHNIQUE IN COMBINATION WITH A MOTOR-DRIVEN CRAWLER SYSTEM. W. Kelb, KontrollTechnik, Germany

TESTING OF BURIED PIPES BY SLOFEC TECHNIQUE IN COMBINATION WITH A MOTOR-DRIVEN CRAWLER SYSTEM. W. Kelb, KontrollTechnik, Germany More Info at Open Access Database www.ndt.net/?id=18480 Introduction TESTING OF BURIED PIPES BY SLOFEC TECHNIQUE IN COMBINATION WITH A MOTOR-DRIVEN CRAWLER SYSTEM W. Kelb, KontrollTechnik, Germany In 2001

More information

REPUTE tube fittings are manufactured to stringent quality control program and internal standards which

REPUTE tube fittings are manufactured to stringent quality control program and internal standards which Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are

More information

Development of Automatic Neural Network Classifier of Defects Detected by Ultrasonic Means

Development of Automatic Neural Network Classifier of Defects Detected by Ultrasonic Means ECNDT 2006 - Poster 142 Development of Automatic Neural Network Classifier of Defects Detected by Ultrasonic Means Oleg KARPASH, Maksym KARPASH, Valentine MYNDJUK, National Technical University of Oil

More information

Certifications and Licenses

Certifications and Licenses Company OMPA is a qualified Oilfield Machine Shop with over 40 years experience in Manufacturing of Custom Designed Equipment, Threading Service and Precision Machining Service. It operates on a total

More information

MultiScan MS 5800 Series

MultiScan MS 5800 Series TUBE INSPECTION SYSTEM MultiScan MS 5800 Series Condensers Feedwater Heaters Heat Exchangers Air Conditioners Boilers Air Coolers 920-107D-EN MultiScan MS 5800 E Tube Inspection with Eddy Current Testing

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Ultrasonic thickness measurement

ISO INTERNATIONAL STANDARD. Non-destructive testing Ultrasonic thickness measurement INTERNATIONAL STANDARD ISO 16809 First edition 2012-11-15 Non-destructive testing Ultrasonic thickness measurement Essais non destructifs Mesurage de l'épaisseur par ultrasons Reference number ISO 2012

More information

Pipeline Design & Installation Systems

Pipeline Design & Installation Systems Pipeline Design & Installation Systems Rigid pipeline subsea tie-backs new operational challenges Paul Georgeson Operations Support Manager Wood Group Kenny Agenda - Overview - Materials - Inspection -

More information

ClampOn, Inc. Ultrasonic Intelligent Sensors. Presented by Hans A. Wagner

ClampOn, Inc. Ultrasonic Intelligent Sensors. Presented by Hans A. Wagner ClampOn, Inc. Ultrasonic Intelligent Sensors Presented by Hans A. Wagner Bergen, Norway Locations Project Management Engineering and Manufacturing Research and Development Sales and Service for Eastern

More information

FLAW DETECTION USING ENCIRCLING COIL EDDY CURRENT SYSTEMS

FLAW DETECTION USING ENCIRCLING COIL EDDY CURRENT SYSTEMS DATA SHEET NO GI-2 Magnetic Analysis Corporation FLAW DETECTION USING ENCIRCLING COIL EDDY CURRENT SYSTEMS PRINCIPLES OF OPERATION The detection of flaws such as seams, cracks, pits, slivers, weld-line

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to

More information

MEC-QW-E-2002 Senior QA/QC Welding Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS

MEC-QW-E-2002 Senior QA/QC Welding Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS 101835-MEC-QW-E-2002 Senior QA/QC Welding Engineer Holds a B. Sc. in Mechanical Power Engineering and has about 15 years hands-on experience working as QA/QC Engineer & Welding Inspector in several industrial

More information

Seatooth Pipelogger. Ian Crowther Executive VP WFS Technologies

Seatooth Pipelogger. Ian Crowther Executive VP WFS Technologies Ian Crowther Executive VP WFS Technologies About WFS Technologies WFS Wireless For Subsea Founded 2003 Operations in UK & USA Wireless Solutions Drilling Subsea Vehicles Asset Integrity Management Field

More information

PROCHEM Stainless Steel Specialists

PROCHEM Stainless Steel Specialists PROCHEM Stainless Steel Specialists Product solutions for a world of difference INSTRUMENTATION BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC PROCHEM

More information

The Essentials of Pipeline Integrity Management

The Essentials of Pipeline Integrity Management TRAINING METHODOLOGY This interactive training workshop includes the following training methodologies : Lectures Video Discussion of case histories and hands on calculations WHO SHOULD ATTEND The course

More information

Controls and Communications Connectors Diamould electrical connectors

Controls and Communications Connectors Diamould electrical connectors Controls and Communications Connectors Diamould electrical connectors APPLICATIONS Subsea production systems controls Connectivity to tree, manifold, choke, and chemical injection metering valve (CIMV)

More information

Heat Exchangers TUBE TO FIN, LIQUID-TO-AIR HEAT EXCHANGERS

Heat Exchangers TUBE TO FIN, LIQUID-TO-AIR HEAT EXCHANGERS Heat Exchangers TUBE TO FIN, LIQUID-TO-AIR HEAT EXCHANGERS ATS tube-to-fin, liquid-to-air heat exchangers are made with the industry s highest density fins to maximize heat transfer from liquid to air,

More information