Technology Competency Descriptors Students will be able to identify, compare, and utilize appropriate technological applications.

Size: px
Start display at page:

Download "Technology Competency Descriptors Students will be able to identify, compare, and utilize appropriate technological applications."

Transcription

1 Technology Competency Descriptors Students will be able to identify, compare, and utilize appropriate technological Criteria Does Not Meet NA Identifies technological Demonstrates the use of technology for a project or task. Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using Compares and contrasts differences between technologies for use by individual, discipline, field and/or education. Analyzes intended and unintended impacts of technology use. Evaluates, selects and integrates technologies into school, home and/or community. Evaluates and selects several technology methods that will best accommodate collaboration in research, communication and presentation among individuals in physically separated locations Comprehensively integrates security, ethical and legal standards of technology use. Describes technology using accurate terminology. Recognizes technology to complete a task. Evaluates technologies that increase educational and workplace opportunities. Demonstrates technological skills to enhance learning, extend capability, and promote creativity for a specific project or task. Utilizes one or two technologies for information research and/or communication. Demonstrates the application of security, ethical and legal standards. Does not identify a technological application. Does not demonstrate the use of technology for a project or task. Does not use technology for collaboration and information exchange. Does not apply security, ethical and legal standards while using

2 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You Does Not Meet Comments technology for a project or task. Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using

3 SETS A1, A2, and A3 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You Does Not Meet percentage of students who met or exceeded the standards A1+A2+A3 A1+A2+A3 A1+A2+A = = =0 100% technology for a project or task = = =1 98% Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using Percentage above shows an average per category of the points which all s gave per item. Total number of assignments per this set 17 Number of s for the set: 3 Each assignment in this set was scored three times.

4 SETS B1, B2, and B3 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You B1+B2+B3 B1+B2+B3 Does Not Meet B1+B2+B3 Overall average indicative of percentage of students who met or exceeded the standards technology for a project or task = = =0 100% Uses technology for collaboration and information exchange = = =0 100% Applies knowledge of security, ethical, and legal standards while using Percentage above shows an average per category of the points which all s gave per item. Total number of assignments per this set 3 Number of s for the set: 3 Each assignment in this set was scored three times

5 SETS C1, C2, and C3 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You Does Not Meet Overall average indicative of percentage of students who met or exceeded the standards C1+C2+C3 C1+C2+C3 C1+C2+C = = =0 100% technology for a project or task = = =0 100% Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using Percentage above shows an average per category of the points which all s gave per item. Total number of assignments per this set 6 Number of s for the set: 3 Each assignment in this set was scored three times.

6 SETS D1, D2, and D3 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You D1+D2+D3 D1+D2+D3 Does Not Meet D1+D2+D3 D1 Overall average indicative of percentage of students who met or exceeded the standards 9+0+9= = =0 100% technology for a project or task = = =0 100% Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using 0+0+7= = =0 9 67% Percentage above shows an average per category of the points which all s gave per item. Total number of assignments per this set 9 Number of s for the set: 3 Each assignment in this set was scored three times.

7 SETS E1, E2, and E3 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Rate the student for each outcome as,, Below, or Not Applicable. You Does Not Meet Overall average indicative of percentage of students who met or exceeded the standards E1+E2+E3 E1+E2+E3 E1+E2+E = = =0 100% technology for a project or task = = =2 93% Uses technology for collaboration and information exchange = = =0 100% Applies knowledge of security, ethical, and legal standards while using Percentage above shows an average per category of the points which all s gave per item. Total number of assignments per this set 9 Number of s for the set: 3 Each assignment in this set was scored three times.

8 Technology Competency Students will be able to identify, compare, and utilize appropriate technological Percentage of students who met or exceeded the standards Percentage of students who did not meet 100% 0% technology for a project or task. 98% 2% Uses technology for collaboration and information exchange. 100% 0% Applies knowledge of security, ethical, and legal standards while using 67% 33% Sets of Assignments Submitted 5 Total Number of Assignments 44

9

10

11 Technology Competency Collected, Spring 2010 Scored, Fall Identifies technological Percentage of students who met or exceeded the standards Demonstrates the use of technology for a project or task. Uses technology for collaboration and information exchange. Applies knowledge of security, ethical, and legal standards while using

Northeast Alabama Community College

Northeast Alabama Community College Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2016-2017 Academic Year Written Communication Students will demonstrate adequate writing skills by

More information

STAGE 2 INFORMATION PROCESSING AND PUBLISHING ASSESSMENT TYPE 1: PRACTICAL SKILLS STUDENT RESPONSE 1 BUSINESS LOGO AND MAIL MERGE

STAGE 2 INFORMATION PROCESSING AND PUBLISHING ASSESSMENT TYPE 1: PRACTICAL SKILLS STUDENT RESPONSE 1 BUSINESS LOGO AND MAIL MERGE STAGE 2 INFORMATION PROCESSING AND PUBLISHING ASSESSMENT TYPE 1: PRACTICAL SKILLS STUDENT RESPONSE 1 BUSINESS LOGO AND MAIL MERGE Page 1 of 10 Page 2 of 10 Page 3 of 10 Page 4 of 10 Page 5 of 10 Page 6

More information

Northeast Alabama Community College

Northeast Alabama Community College Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2015-2016 Academic Year Written Communication Students will demonstrate adequate writing skills by

More information

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Lowell National Historical Park 38 th Annual Banjo & Fiddle Contest

Lowell National Historical Park 38 th Annual Banjo & Fiddle Contest Registration Packet Instructions: Print single-sided to allow for form separation 1. Please read the Contest Rules first. 2. There are two types of entries: single instrument and double instrument (i.e.,

More information

Iowa Core Technology Literacy: A Closer Look

Iowa Core Technology Literacy: A Closer Look Iowa Core Technology Literacy: A Closer Look Creativity and Innovation (Make It) Use technology resources to create original Demonstrate creative thinking in the design products, identify patterns and

More information

BONDING: HOW DOES IT AFFECT US?

BONDING: HOW DOES IT AFFECT US? CHEMISTRY 20 - Unit A: Chemical Bonding Students will find a recently published article (magazine, research, internet, newspaper, etc.) and discuss the science (specifically related to the bonding chemistry)

More information

VCE Media: Administration information for School-based Assessment in 2018

VCE Media: Administration information for School-based Assessment in 2018 VCE Media: Administration information for School-based Assessment in 2018 Units 3 and 4 School-assessed Task The School-assessed Task contributes 40 per cent to the study score and is commenced in Unit

More information

2012 TA Assessment Report. August 13, Dear Members of the Assessment Committee,

2012 TA Assessment Report. August 13, Dear Members of the Assessment Committee, 2012 TA Assessment Report August 13, 2012 Dear Members of the Assessment Committee, The survey below were evolved from an earlier plan to use the Self Reflection and Professional Competence core values

More information

VCE Product Design and Technology: Administrative information for Schoolbased Assessment in 2018

VCE Product Design and Technology: Administrative information for Schoolbased Assessment in 2018 VCE Product Design and Technology: Administrative information for Schoolbased Assessment in 2018 Units 3 and 4 School-assessed Task The School-assessed Task contributes 50 per cent to the study score and

More information

Science Achievement Level Descriptors STRUCTURE AND FUNCTION GRADE 5

Science Achievement Level Descriptors STRUCTURE AND FUNCTION GRADE 5 STRUCTURE AND FUNCTION GRADE 5 General Policy Definitions (Apply to all grades and all subjects) Students demonstrate partial Students demonstrate mastery of mastery of grade-level knowledge grade-level

More information

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

IB Course Syllabus 2015/16 Visual Arts (HL/SL)

IB Course Syllabus 2015/16 Visual Arts (HL/SL) IB Course Syllabus 2015/16 Visual Arts (HL/SL) Rocio Toral Time: Two-year programme Room: 111-112-114 DESCRIPTION: This course is intended for students with a serious interest in the visual arts and the

More information

The student performing at the mastery level identifies a variety of two-dimensional. and three-dimensional

The student performing at the mastery level identifies a variety of two-dimensional. and three-dimensional Adolescent Visual Art Education 9-12 General Art I Art I is designed to reinforce and build on 21 st Century Knowledge and Skills developed by the K-8 Visual Arts Content Standards and Objectives. Students

More information

BA (Hons) Photography Length of Course

BA (Hons) Photography Length of Course Programme Specification Every taught course of study leading to a UAL award is required to have a Programme Specification. This summarises the course aims, learning outcomes, teaching, learning and assessment

More information

Design and Technology Subject Outline Stage 1 and Stage 2

Design and Technology Subject Outline Stage 1 and Stage 2 Design and Technology 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia

More information

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Bachelor of Science in Nuclear Engineering Technology

Bachelor of Science in Nuclear Engineering Technology FY 2017 Enrollment:406; Graduates: 219 Bachelor of Science in Nuclear Engineering Technology Program Educational Objectives Program Educational Objectives (PEOs) are broad statements that describe what

More information

Maryland Technology Literacy Standards for Students

Maryland Technology Literacy Standards for Students Standard 1.0 Technology Systems: Develop foundations in the understanding and uses of technology systems A. Systems 1. Demonstrate knowledge of technology systems a) Use network resources effectively and

More information

Art at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6

Art at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6 Term 6 (Early rotation) Introductory module 1. Drawing, painting and colour theory. Study Analysis and annotation. Research. Critical and contextual studies. The formal Observational drawing skills: Line,

More information

20 Marks. Due Date: Week 3B Term 3 Wednesday 30 th July (7Tec4) Thursday 31 st July (7Tec2) Lost Wax Casting & Silver Mining (Research Assignment)

20 Marks. Due Date: Week 3B Term 3 Wednesday 30 th July (7Tec4) Thursday 31 st July (7Tec2) Lost Wax Casting & Silver Mining (Research Assignment) Due Date: Week 3B Term 3 Wednesday 30 th July (7Tec4) Thursday 31 st July (7Tec2) Lost Wax Casting & Silver Mining (Research Assignment) 20 Marks Unit: Lost Wax Casting & Silver Mining Context This unit

More information

DFTG Blueprint Reading and Sketching

DFTG Blueprint Reading and Sketching Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching

More information

Innovation Management and Technology Adoption. Dr. Mircea Mihaescu, P.Eng. March 7, 2012

Innovation Management and Technology Adoption. Dr. Mircea Mihaescu, P.Eng. March 7, 2012 Innovation Management and Technology Adoption Dr. Mircea Mihaescu, P.Eng. March 7, 2012 Why Should a Company Innovate? Where will the profits be tomorrow? Innovations in: Business model Operations New

More information

EQF Level Descriptors Theology and Religious Studies

EQF Level Descriptors Theology and Religious Studies EQF Level Descriptors Theology and Religious Studies Project Title: Sectoral Qualifications Framework for Humanities & Arts This project has been funded with support from the European Commission. This

More information

NON-NEGOTIBLE EVALUATION CRITERIA

NON-NEGOTIBLE EVALUATION CRITERIA PUBLISHER: SUBJECT: SPECIFIC GRADE: COURSE: TITLE COPYRIGHT: SE ISBN: TE ISBN: NON-NEGOTIBLE EVALUATION CRITERIA 2016-2022 Group III - Visual Arts Grade 4 Equity, Accessibility and Format Yes No N/A CRITERIA

More information

Rubric for Assessing OSH&E Program Outcomes

Rubric for Assessing OSH&E Program Outcomes Rubric for Assessing OSH&E Program Outcomes Objective : Apply knowledge and principles of mathematics, science, technology, and management in industry, business, or other related areas of employment as

More information

Learning Goals and Related Course Outcomes Applied To 14 Core Requirements

Learning Goals and Related Course Outcomes Applied To 14 Core Requirements Learning Goals and Related Course Outcomes Applied To 14 Core Requirements Fundamentals (Normally to be taken during the first year of college study) 1. Towson Seminar (3 credit hours) Applicable Learning

More information

Inventions & Innovations

Inventions & Innovations Inventions & Innovations Course Description In this course, students learn all about invention and innovation. They will have opportunities to study the history of inventions and innovations, including

More information

General Education Rubrics

General Education Rubrics General Education Rubrics Rubrics represent guides for course designers/instructors, students, and evaluators. Course designers and instructors can use the rubrics as a basis for creating activities for

More information

TracDat V.5: How To AY University of Hartford. Program Student-Learning Outcome Assessment

TracDat V.5: How To AY University of Hartford. Program Student-Learning Outcome Assessment TracDat V.5: How To AY 2105-2016 University of Hartford Program Student-Learning Outcome Assessment The University of Hartford uses the software, TracDat V.5, for managing, tracking, and reporting on the

More information

Documentation. Internal assessment. The roles to be undertaken for assessment purposes must be one of the following:

Documentation. Internal assessment. The roles to be undertaken for assessment purposes must be one of the following: The roles to be undertaken for assessment purposes must be one of the following: Although other functions (such as musical composition, costume design and acting) are integral to many kinds of film-making,

More information

LETTER OF PROMULGATION

LETTER OF PROMULGATION D EPARTMEN T OF DEFENSE CHIEF, ARMY MARS CHIEF, AIR FORCE MARS CHIEF, NAVY-MARINE CORPS MARS 22 Nov 2007 LETTER OF PROMULGATION 1. The Standard Operating Procedure for Calling and Operating a Voice Net

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60601-1-6 First edition 2004-06 Medical electrical equipment Part 1-6: General requirements for safety Collateral standard: Usability This English-language version is derived

More information

PROGRAM ASSESSMENT PLAN ~ through This document only needs to be updated when changes are made.

PROGRAM ASSESSMENT PLAN ~ through This document only needs to be updated when changes are made. PROGRAM AEMENT PLAN ~ 2013-14 through 2018-19 UNIT Department (if applicable) Degree/Program CHOOL OF BUINE N/A Date Prepared July 17, 2015 Date Revised Bachelor of Business Administration Updated to New

More information

MAJOR PROGRAM ASSESSMENT PLAN

MAJOR PROGRAM ASSESSMENT PLAN MAJOR PROGRAM ASSESSMENT PLAN Department: Television and Film Arts Goals of the program: The goal of the Television and Film Arts program is to prepare students to effectively work in a variety careers

More information

Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)

Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving

More information

Questionnaire for those who participated or are currently participating in an exchange program in Japan from

Questionnaire for those who participated or are currently participating in an exchange program in Japan from 1 of 6 2/3/2011 8:18 AM Powered By: Skylight Matrix Survey System Questionnaire for those who participated or are currently participating in an exchange program in Japan from 1999-2010 Program Evaluation

More information

Comparison of Two Alternative Movement Algorithms for Agent Based Distillations

Comparison of Two Alternative Movement Algorithms for Agent Based Distillations Comparison of Two Alternative Movement Algorithms for Agent Based Distillations Dion Grieger Land Operations Division Defence Science and Technology Organisation ABSTRACT This paper examines two movement

More information

GACE Technology Education Assessment Test at a Glance

GACE Technology Education Assessment Test at a Glance GACE Technology Education Assessment Test at a Glance Updated January 2016 See the GACE Technology Education Assessment Study Companion for practice questions and preparation resources. Assessment Name

More information

Standards Essays IX-1. What is Creativity?

Standards Essays IX-1. What is Creativity? What is Creativity? Creativity is an underlying concept throughout the Standards used for evaluating interior design programs. Learning experiences that incorporate creativity are addressed specifically

More information

AWQ 30 Photography - Grade 11 Open McEwan

AWQ 30 Photography - Grade 11 Open McEwan AWQ 30 Photography - Grade 11 Open McEwan Course Description: This course focuses on studio activities in one or more of the visual arts, including drawing, painting, sculpture, photography, printmaking,

More information

Impact of Technology Learning Goal

Impact of Technology Learning Goal Impact of Technology Learning Goal Definition The definition for the term technology differs depending on what academic discipline one is studying. In some disciplines, technology refers to tools and machines

More information

CC532 Collaborative System Design

CC532 Collaborative System Design CC532 Collaborative Design Part I: Fundamentals of s Engineering 5. s Thinking, s and Functional Analysis Views External View : showing the system s interaction with environment (users) 2 of 24 Inputs

More information

TExES Art EC 12 (178) Test at a Glance

TExES Art EC 12 (178) Test at a Glance TExES Art EC 12 (178) Test at a Glance See the test preparation manual for complete information about the test along with sample questions, study tips and preparation resources. Test Name Art EC 12 Test

More information

Project 1: A Game of Greed

Project 1: A Game of Greed Project 1: A Game of Greed In this project you will make a program that plays a dice game called Greed. You start only with a program that allows two players to play it against each other. You will build

More information

DIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits)

DIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits) DIPLOMA IN FASHION DESIGN AND TECHNOLOGY Qualification code: DPFD19 - NQF Level 6 (360 credits) SAQA ID: 100951, CHE NUMBER: H16/14237/HEQSF Campus where offered: Arts Campus REMARKS a. Admission requirement(s)

More information

Explain how you found your answer. NAEP released item, grade 8

Explain how you found your answer. NAEP released item, grade 8 Raynold had 31 baseball cards. He gave the cards to his friends. Six of his friends received 3 cards Explain how you found your answer. Scoring Guide Solution: 6 x 3 cards = 18 cards 7 x 1 card = 7 cards

More information

LAST REVIEW: NEXT REVIEW: STATUS: A COURSE TITLE: Painting I COMMON COURSE NUMBER: ART 2500C

LAST REVIEW: NEXT REVIEW: STATUS: A COURSE TITLE: Painting I COMMON COURSE NUMBER: ART 2500C LAST REVIEW: 2008-2009 NEXT REVIEW: 2013-2014 STATUS: A COURSE TITLE: Painting I COMMON COURSE NUMBER: ART 2500C CREDIT HOURS: 3 CONTACT HOUR BREAKDOWN (per 16 week term) CLOCK HOURS: Lecture: Lab: 96

More information

Assessment: Course Four Column FALL 2016

Assessment: Course Four Column FALL 2016 Assessment: Course Four Column FALL 2016 El Camino: Course SLOs (FA) - Photography ECC: PHOT 106:Basic Photojournalism (Same course as JOUR 6) Course SLOs SLO #1 Photo Story Essay Wide Angle Lens - Upon

More information

RUBRICS. 18 October 2018 Monthly Workshop Series

RUBRICS. 18 October 2018 Monthly Workshop Series RUBRICS 18 October 2018 Monthly Workshop Series PRESENTER INFORMATION GALEN DAVIS Director of Faculty Development Learning House LEARNING OBJECTIVES By the end of this session, you should be able to: Distinguish

More information

COWLEY COLLEGE & Area Vocational Technical School

COWLEY COLLEGE & Area Vocational Technical School COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR INTRO TO SCREENWRITING ENG2264-3 Credit Hours Student Level: This course is open to students on the college level in either the freshman

More information

1. Choose two shapes. Combine the shapes to make a new shape. Make sure that the two shapes share a side. Draw your new shape.

1. Choose two shapes. Combine the shapes to make a new shape. Make sure that the two shapes share a side. Draw your new shape. Name Unit 7 Shape Up!. Choose two shapes. Combine the shapes to make a new shape. Make sure that the two shapes share a side. Draw your new shape. 2. Describe each shape you used. Explain how your new

More information

EXPLORING HOW ENGINEERING ENTREPRENEURSHIP COMPETENCIES ALIGN WITH ABET CRITERION 3A-K

EXPLORING HOW ENGINEERING ENTREPRENEURSHIP COMPETENCIES ALIGN WITH ABET CRITERION 3A-K EXPLORING HOW ENGINEERING ENTREPRENEURSHIP COMPETENCIES ALIGN WITH ABET CRITERION 3A-K ELIZABETH KISENWETHER PENN STATE UNIVERSITY EXK13@PSU.EDU NATHALIE D UVAL-COUETIL & JACOB WHEADON PURDUE UNIVERSITY

More information

ITC108 Assignment 2 - Game Analysis

ITC108 Assignment 2 - Game Analysis ITC108 Assignment 2 - Game Analysis Value: 30% Due date: 19 th August 2016 Return date: 9 th September 2016 Submission method options EASTS (online) Background Being up to date with the recent trends in

More information

Canada-Italy Innovation Award Call for Proposals

Canada-Italy Innovation Award Call for Proposals Embassy of Canada to Italy Canada-Italy Innovation Award 2018 Public Affairs and Advocacy www.canada.it Canada-Italy Innovation Award 2018 Call for Proposals Overview The Embassy of Canada to Italy is

More information

Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Graphic Production Grade 12 BIG IDEAS

Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Graphic Production Grade 12 BIG IDEAS BIG IDEAS Design for the life cycle includes consideration of social and environmental impacts. Design choices require the evaluation and refinement of skills. Tools and technologies can be adapted for

More information

Test at a Glance. Updated June 2017

Test at a Glance. Updated June 2017 GACE Engineering and Technology Education Assessment Test at a Glance Updated June 2017 See the GACE Engineering and Technology Assessment Study Companion for practice questions and preparation resources.

More information

Competency Standard for Registration as a Professional Engineer

Competency Standard for Registration as a Professional Engineer ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Competency Standard for Registration as a Professional Engineer Status: Approved by Council Document : R-02-PE Rev-1.3 24 November 2012

More information

G9 - Engineering Council AHEP Competencies for IEng and CEng

G9 - Engineering Council AHEP Competencies for IEng and CEng G9 - Career Learning Assessment (CLA) is an alternative means of gaining Engineering Council Registration at either Incorporated Engineer (IEng) or Chartered Engineering (CEng) status. IAgrE encourages

More information

Correlating 21st Century Skills Assessment reports with South Dakota Standards

Correlating 21st Century Skills Assessment reports with South Dakota Standards 21st Century Skills Assessment tests and reports proficiency to the ISTE NETS-S 2007 strands. This is the standards correlation of South Dakota Educational Technology Content Standards to the ISTE NETS-S

More information

Assessment: Course Four Column Fall 2017

Assessment: Course Four Column Fall 2017 Assessment: Course Four Column Fall 2017 El Camino: (FA) - Photography ECC: PHOT 101:Elementary Photography SLO #2 Shallow and Depth of Field Students will be able to visualize and produce film and digital

More information

Disaster Prevention System Utilizing Social Media Information

Disaster Prevention System Utilizing Social Media Information Disaster Prevention System Utilizing Social Media Information Naoshi Morita Makoto Hayakawa Norisuke Takao Information on disasters has conventionally been obtained by using physical sensors such as water/rain

More information

Design and Technologies: Engineering principles and systems and Materials and technologies specialisations Automatons

Design and Technologies: Engineering principles and systems and Materials and technologies specialisations Automatons Sample assessment task Year level 10 Learning area Subject Title of task Task details of task Type of assessment Purpose of assessment Assessment strategy Evidence to be collected Technologies Design and

More information

Engineering Technology

Engineering Technology PRECISION EXAMS Engineering Technology EXAM INFORMATION Items 25 Points 37 Prerequisites NONE Grade Level 9 Course Length ONE SEMESTER DESCRIPTION A foundational engineering design course that introduces

More information

Geometric Dimensioning & Tolerancing

Geometric Dimensioning & Tolerancing Western Technical College 31420350 Geometric Dimensioning & Tolerancing Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Recognition

More information

STRUCTURE OF THE H2020 PROPOSAL, TYPES OF ACTIONS, TLR. Summer School for Young Researchers, September 2017, Odessa

STRUCTURE OF THE H2020 PROPOSAL, TYPES OF ACTIONS, TLR. Summer School for Young Researchers, September 2017, Odessa STRUCTURE OF THE H2020 PROPOSAL, TYPES OF ACTIONS, TLR Summer School for Young Researchers, 25-28 September 2017, Odessa FROM THE IDEA TO THE PROJECT Idea Partner Proposal ADMINISTRATIVE PROCEDURES Single/Two-stage

More information

Course Outline. Code: COU751 Title: Mindfulness-Based Interventions in Counselling

Course Outline. Code: COU751 Title: Mindfulness-Based Interventions in Counselling Course Outline Code: COU751 Title: Mindfulness-Based Interventions in Counselling Faculty of Arts, Business and Law School of Social Sciences Teaching Session: Semester 1 Year: 2018 Course Coordinator:

More information

Administrative Staff Questionnaire. Overall technical direction. Management and administration of center. Management of individual research projects

Administrative Staff Questionnaire. Overall technical direction. Management and administration of center. Management of individual research projects Administrative Staff Questionnaire Each university/industry cooperative center represents a unique organizational design. In order to understand better the overall Center program, we would like to know

More information

GACE Art Education Assessment Test at a Glance

GACE Art Education Assessment Test at a Glance GACE Art Education Assessment Test at a Glance Updated May 2017 See the GACE Art Education Assessment Study Companion for practice questions and preparation resources. Assessment Name Art Education Grade

More information

The Gibraltar Financial Services Commission. Experienced Investor Fund Directors Thematic Review Outcomes

The Gibraltar Financial Services Commission. Experienced Investor Fund Directors Thematic Review Outcomes The Experienced Investor Fund Directors Published: January 2017 Table of Contents Pages Foreword 3 Chapter 1 Background 4 Chapter 2 Summary of Findings 5-6 Chapter 3 Future Plans 7-8 Appendix EIF Director

More information

Supporting medical technology development with the analytic hierarchy process Hummel, Janna Marchien

Supporting medical technology development with the analytic hierarchy process Hummel, Janna Marchien University of Groningen Supporting medical technology development with the analytic hierarchy process Hummel, Janna Marchien IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's

More information

Stage 2 Legal Studies. Assessment Type 2: Inquiry

Stage 2 Legal Studies. Assessment Type 2: Inquiry Stage 2 Legal Studies Assessment Type 2: Inquiry Purpose You have the opportunity to demonstrate your civic literacy skills through the study of a contemporary issue related to an aspect or aspects of

More information

LANEY COLLEGE COURSE OUTLINE

LANEY COLLEGE COURSE OUTLINE LANEY COLLEGE COURSE OUTLINE COLLEGE: STATE APPROVAL DATE: 04/05/2018 ORIGINATOR: Koina Freeman STATE CONTROL NUMBER: CCC00059 1966 BOARD OF TRUSTEES APPROVAL DATE: 03/27/2018 CURRICULUM COMMITTEE APPROVAL

More information

We re Meeting You Where You Are. Closing the Loop

We re Meeting You Where You Are. Closing the Loop We re Meeting You Where You Are Closing the Loop 1 We re Meeting You Where You Are SLO Convocation Day April 15, 2011 SLO s SLOACs PLOs Annual Program Review Update SLO Coordinators Mary Pape Toño Ramirez

More information

Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab)

Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: 1. 1310 Microstation (required) 2. Knowledge of basic computer operations and

More information

1.1 Investigate the capabilities and limitations of a range of digital gaming platforms

1.1 Investigate the capabilities and limitations of a range of digital gaming platforms Unit Title: Game design concepts Level: 2 OCR unit number: 215 Credit value: 4 Guided learning hours: 30 Unit reference number: T/600/7735 Unit purpose and aim This unit helps learners to understand the

More information

Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus

Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus Date approved 8/21/18 Date revised 8/21/18 I. BASIC COURSE INFORMATION A. Course Description:

More information

Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)

Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving

More information

CATHOLIC REGIONAL COLLEGE SYDENHAM. Study: Studio Arts

CATHOLIC REGIONAL COLLEGE SYDENHAM. Study: Studio Arts CATHOLIC REGIONAL COLLEGE SYDENHAM Study: Studio Arts Rationale: The creative nature of visual art provides individuals with the opportunity for personal growth, the expression of ideas and a process for

More information

CLANCY CATHOLIC COLLEGE

CLANCY CATHOLIC COLLEGE CLANCY CATHOLIC COLLEGE Year 8 Technology Mandatory Rotation 3 GUMBALL Portfolio & Project Task 4 NAME: TEACHER: Term 4 Week 6 (Circle) 10/11/14 11/11/14 12/11/14 13/11/14 14/11/14 Period: KLA: TAS WEIGHTING:

More information

BHX Oil spill! Design Portfolio Assessment Rubric

BHX Oil spill! Design Portfolio Assessment Rubric BHX 2017-2018- Oil spill! Design Portfolio Assessment Rubric https://response.restoration.noaa.gov/about/media/how-do-oil-spills-out-sea-typically-get-cleaned.htm l https://www.seeker.com/animal-clean-up-after-oil-spill-a-lengthy-process-1765097115.html

More information

Website:

Website: SJSU Annual Program Assessment Form Academic Year 2015 2016 Department: Design Program: Interior Design College: Humanities and the Arts Website: http://www.sjsu.edu/design/design_programs/interior_design_program/

More information

Grade Descriptors: Design & Technology

Grade Descriptors: Design & Technology Grade Descriptors: Design & Technology Investigating the Design Context Development of the Design Proposals Making Testing and Evaluation Communication Grade 9 Discrimination show when selecting and acquiring

More information

You have made an encouraging start to your studies. However, not always met the requirements of the various exercises.

You have made an encouraging start to your studies. However, not always met the requirements of the various exercises. Tutor report Student name Raluca Oprisan Student number 513460 Course/Module Drawing 1 Assignment number 1 Overall Comments Video feedback of digital submission, 17 Dec 2014. You have made an encouraging

More information

Transformation Series Photo Project

Transformation Series Photo Project Transformation Series Photo Project Name: Transformation: a change or alteration, an act, process, or instance of transforming or being transformed. Nature based transformation -> Seasonal Changes: Sun/Plant/Flower

More information

Years 9 and 10 standard elaborations Australian Curriculum: Digital Technologies

Years 9 and 10 standard elaborations Australian Curriculum: Digital Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

File E Project 91EK524. March 31, 1992 REPORT COMPONENT-POWER SUPPLIES. Vicor Corp. Andover, MA

File E Project 91EK524. March 31, 1992 REPORT COMPONENT-POWER SUPPLIES. Vicor Corp. Andover, MA File E135493 Project 91EK524 March 31, 1992 REPORT on COMPONENT-POWER SUPPLIES Vicor Corp. Andover, MA Copyright 1992 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named

More information

Human Capital Management: Step-by-Step Guide

Human Capital Management: Step-by-Step Guide Human Capital Management: Step-by-Step Guide Payroll Expense Transfers PETs (Regular Users) This guide describes how to create and submit a Payroll Expense Transfer (PET). PETs are used to move expenses

More information

Name LESSON 18 (7GM4) Note page #61. Date Counting Problems Period

Name LESSON 18 (7GM4) Note page #61. Date Counting Problems Period Name LESSON 18 (7GM4) Note page #61 Date Counting Problems Period Opening Exercise You are about to switch out your books from your locker during passing period but forget the order of your locker combination.

More information

KNES Art & Design Course Outline. Year 8

KNES Art & Design Course Outline. Year 8 KNES Art & Design Course Outline Year 8 Art & Design stimulates creativity and imagination. It provides visual, tactile and sensory experiences and a unique way of understanding and responding to the world.

More information

2014 New Jersey Core Curriculum Content Standards - Technology

2014 New Jersey Core Curriculum Content Standards - Technology 2014 New Jersey Core Curriculum Content Standards - Technology Content Area Standard Strand Grade Level bands Technology 8.2 Technology Education, Engineering, Design, and Computational Thinking - Programming:

More information

Gallatin College Departmental Assessment Plans

Gallatin College Departmental Assessment Plans Gallatin College Departmental Assessment Plans Gallatin College started building assessment reports and Program Outcomes Assessment plans Fall 2014, so the reports below are the schedules and samples from

More information

Rules Summary: 3D Class

Rules Summary: 3D Class Rules Summary: 3D Class Classcraft is a game you and your teacher play together that transforms how you experience class every day. Soon, you'll create a character in the game and meet your new team. By

More information

LSAD Clonmel. Digital Animation Production

LSAD Clonmel.   Digital Animation Production LSAD Clonmel www.lit.ie/campus/clonmel/ Digital Animation Production www.lit.ie/courses/lc518 www.facebook.com/animation.lit Game Art and Design www.lit.ie/courses/lc502 www.facebook.com/gameartdesign.lit

More information

Course Description: Course Goals: Course Outcomes: Methods of Instruction: Materials:

Course Description: Course Goals: Course Outcomes: Methods of Instruction: Materials: Digital Photography Art-137-81 and CIS-137-81 3 Credit Hours, Tuesday, 6:00pm 8:54pm September 6 December 20, 2016 Jackson College LeTarte Center-Hillsdale Ellen Permoda (517) 914-4759 permodaellenh@jccmi.edu

More information

Eco Lamp Assessment Task

Eco Lamp Assessment Task Eco Lamp Assessment Task Length: See folio guide Marks / value: Folio: 25% Project: 25% Date due: Design Folio Progress Mark Term 1 Week 10 Design Folio Term 2 Week 9 Design Project Term 2 Week 9 Purpose

More information

Science and mathematics

Science and mathematics Accreditation of HE Programmes (AHEP): Collated learning outcomes for six areas of learning Programmes accredited for IEng Engineering is underpinned by science and mathematics, and other associated disciplines,

More information

in the New Zealand Curriculum

in the New Zealand Curriculum Technology in the New Zealand Curriculum We ve revised the Technology learning area to strengthen the positioning of digital technologies in the New Zealand Curriculum. The goal of this change is to ensure

More information

GECC Assessment of TECH Technology in World Civilization

GECC Assessment of TECH Technology in World Civilization GECC Assessment of TECH 393 - Technology in World Civilization Winter Quarter 2010 Section 01 Facilitated by: William Loendorf Section 02 Facilitated by: Dan Sisson Section 85 Facilitated by: Terence Geyer

More information

Assessment: Course Four Column SPRING/SUMMER 2015

Assessment: Course Four Column SPRING/SUMMER 2015 Assessment: Course Four Column SPRING/SUMMER 2015 El Camino: s (FA) - Photography ECC: PHOT 102:Basic Photography SLO #2 Proper Placement of Studio Lights - Students will be able to demonstrate proper

More information