A historical perspective on experimental acoustic processing systems at DRDC Atlantic

Transcription

1 CAN UNCLASSIFIED A historical perspective on experimental acoustic processing systems at DRDC Atlantic John Olser Sean Pecknold, Gary Inglis, Mark Stoddard DRDC Atlantic Research Centre Canadian Acoustics Volume number: 45 Issue number: 4 Pagination info: Date of Publication from Ext Publisher: December 2017 Defence Research and Development Canada External Literature (N) DRDC-RDDC-2018-N014 March 2018 CAN UNCLASSIFIED

2 CAN UNCLASSIFIED IMPORTANT INFORMATIVE STATEMENTS This document was reviewed for Controlled Goods by Defence Research and Development Canada (DRDC) using the Schedule to the Defence Production Act. Disclaimer: This document is not published by the Editorial Office of Defence Research and Development Canada, an agency of the Department of National Defence of Canada but is to be catalogued in the Canadian Defence Information System (CANDIS), the national repository for Defence S&T documents. Her Majesty the Queen in Right of Canada (Department of National Defence) makes no representations or warranties, expressed or implied, of any kind whatsoever, and assumes no liability for the accuracy, reliability, completeness, currency or usefulness of any information, product, process or material included in this document. Nothing in this document should be interpreted as an endorsement for the specific use of any tool, technique or process examined in it. Any reliance on, or use of, any information, product, process or material included in this document is at the sole risk of the person so using it or relying on it. Canada does not assume any liability in respect of any damages or losses arising out of or in connection with the use of, or reliance on, any information, product, process or material included in this document. Template in use: Normal.dotm Her Majesty the Queen in Right of Canada (Department of National Defence), 2017 Sa Majesté la Reine en droit du Canada (Ministère de la Défense nationale), 2017 CAN UNCLASSIFIED

3 A HISTORICAL PERSPECTIVE ON EXPERIMENTAL ACOUSTIC PROCESSING SYSTEMS AT DRDC ATLANTIC John C. Osler *, Sean P. Pecknold, Gary Inglis, Mark Stoddard Defence Research and Development Canada Atlantic Research Centre, Dartmouth, Nova Scotia, Canada Résumé L une des applications les plus anciennes de l acoustique sous-marine consiste à la détection de sous-marins. Le Centre de recherches de l'atlantique de Recherche et développement pour la défense Canada (RDDC Atlantique) mène, depuis 75 ans, les recherches canadiennes dans le domaine de la lutte anti-sous-marine (ASM) et du sonar. Une partie de cette recherche, toujours en cours au Centre de recherches de l Atlantique, est dédiée au développement et la mise en œuvre de systèmes de traitement en acoustique maritime. Mots clefs : sonar, traitement du signal Abstract An enduring application of underwater acoustics has been the requirement to detect submarines. Defence Research and Development Canada Atlantic Research Centre (DRDC Atlantic) has been leading Canadian efforts in anti-submarine warfare (ASW) and naval sonar for 75 years. Part of this research has included the development and implementation of maritime acoustic processing systems, an effort which is still being undertaken at DRDC Atlantic. Keywords: sonar, signal processing 1 Introduction DRDC Atlantic, or the Defence Research and Development Canada Atlantic Research Centre, formerly the Naval Research Establishment and then DREA (Defence Research Establishment Atlantic) has been conducting research and development work for the Royal Canadian Navy since One of the primary focuses of this research has been in the area of underwater acoustics, including naval sonar systems and acoustic signal processing. Early sonar systems relied primarily on the ability of human operators to hear and interpret underwater sounds, either using passive listening systems such as hydrophones, or the echoes returned from active sonar systems. As sonar systems grew in power and complexity, new technologies for processing and interpreting sonar signals were required. Here, we present a brief historical overview of some of the advances made within the Canadian naval research establishment and associated industries [1, 2]. methods to process the received signals, especially the detection of weak target echoes. The availability of new transistor technology enabled systems that were able to filter out weak and random returns, and present an operator with a display of computer-generated contact information for the first time. The results of this Computer Aided Detection and Tracking (CADAT) were implemented in the AN/SQS 510 sonar (Fig. 1) and adopted by the navies of Canada, Portugal, and Belgium. In anticipation of upgrades to the Aurora Long Range Patrol Aircraft and the Canadian Towed Array Sonar System (CANTASS), acoustic processing systems continued to be developed for naval air and surface combatants to facilitate the management of data from increasing large numbers of sensors and relate that data to the tactical situation. 2 Sonar signal processing systems 2.1 Active sonar Beginning in about 1964 signal processing work examined improvements to active sonar that might be made possible by signal design and sophisticated real time computer * john.osler@drdc-rddc.gc.ca sean.pecknold@drdc-rddc.gc.ca gary.inglis@drdc-rddc.gc.ca mark.stoddard@drdc-rddc.gc.ca Figure 1: Operator s console for the AN/SQS-510 sonar system.

4 The airborne processor was renamed IMPACT (Integrated Multistatic Passive / Active Concept Testbed) around 1995 to emphasis its capability for multistatic sonar (multiple acoustic sources and receivers). It was originally called XDAAP (experimental Development of an Airborne Acoustic Processor) in the 1980 s and CASD (Concept Airborne Sonar Demonstrator) in the early 1990 s. The IMPACT system was the first Canadian demonstration system designed for low frequency active sonar, and it was successfully demonstrated on several international Anti- Submarine Warfare (ASW) trials (Fig. 2). The work done on IMPACT played a significant role in the specifications for the CP 140 Aurora upgrade, MVASP, which was manufactured by General Dynamics Canada (GDC) with input from DRDC Atlantic. Figure 2: Left: IMPACT airborne concept demonstrator; right: MVASP processor (top) and display (bottom). 2.2 Towed array processing Following CADAT, acoustic processing system development for surface warships was undertaken in tandem with the introduction of a new paradigm in surveillance, towing a linear array of acoustic receivers (or antenna) by a surface warship. The Experimental Towed Array Sonar System (ETASS) was developed to convince scientists and naval officers that such a system could be used to advantage (e.g., no active sonar transmissions that would reveal the whereabouts of the warship, and taking advantage of the excellent acoustic propagation characteristics in the deep ocean sound channel) without sacrificing military flexibility. An important part of this project was the development of high dynamic range digital beamforming techniques, along with the creation of displays that would allow an operator to interpret all the data from these arrays. ETASS demonstrations began with research trials aboard CFAV Quest and ended with a Canadian naval vessel (initially HMCS Fraser, later HMCS Nipigon) dedicated full time to the development of tactics and future modifications to the production CANTASS (Canadian Towed Array Sonar System), which when it entered service was among the most advanced surface ship towed array sonars in the world. 2.3 Sonar system test bed The System Test Bed (STB) is a repository of software components that began in 1996 and has been used to support various sonar system development projects at Defence Research and Development Canada (DRDC) Atlantic. STB provides active and passive sonar processing and display functionality for sensor, feature, contact, track and environmental data. The STB has been designed to provide flexible, portable, reusable, scalable components for a wide variety of sonar applications. The STB functionality is split among common functional components designed to maximize generic functionality and minimize application specific functionality. System integrators assemble only the components needed to provide the desired capability to satisfy user requirements. 2.4 Current systems The current developmental shipboard system built using STB technology is called MAPS (Maritime Acoustic Processing System) (Fig. 3). MAPS is an integrated hull mounted sonar, sonobuoy and towed array sonar processing and display system that has been installed on the HALIFAX CLASS frigate as a Mission Fit since MAPS has served to inform the statement of requirements for the current Underwater Warfare Suite Upgrade and the upcoming Canadian Surface Combatant. In addition to MAPS, a variety of other STB applications have been developed over the years to satisfy the unique S&T objectives of individual sonar related projects. These S&T applications have enable real time processing and display during experimental trials, where new algorithms and displays are continually conceived, tested and refined. Figure 3: MAPS shipboard concept demonstrator. 3 Future work STB continues to provide a test-bed for the development and testing of new signal processing algorithms, displays, and data fusion concepts for future sonar processing systems These activities are being extended by starting new projects to better integrate emerging data sources and decision aid technologies, integrated and predictive situational awareness

5 and course of action analysis, into the next generation underwater warfare systems. These efforts will enable DRDC Atlantic to investigate and develop innovative technologies for improving long range detection, localization, tracking and identification of underwater threats. Remerciements/Acknowledgments The photo credit for Figure 1 is to Bob Reynolds, DREA staff photographer, Figures 2 and 3 Don Glencross, DRDC Atlantic staff photographer. References [1] J. R. Longard. Knots, Volts and Decibels: An informal history of the Naval Research Establishment DREA. Dartmouth, NS [2] R. L Gaede, H. M. Merklinger. Seas, Ships and Sensors: An informal history of the Defence Research Establishment Atlantic DRDC Atlantic. Dartmouth, NS lz A priy :9 MRY : VlzSeW + N 0C N,RncjC,c g,rncjc\n3, N 0C3NN3

6

7 DOCUMENT CONTROL DATA *Security markings for the title, authors, abstract and keywords must be entered when the document is sensitive 1. ORIGINATOR (Name and address of the organization preparing the document. A DRDC Centre sponsoring a contractor's report, or tasking agency, is entered in Section 8.) 2a. SECURITY MARKING (Overall security marking of the document including special supplemental markings if applicable.) DRDC Atlantic Research Centre Defence Research and Development Canada 9 Grove Street P.O. Box 1012 Dartmouth, Nova Scotia B2Y 3Z7 Canada CAN UNCLASSIFIED 2b. CONTROLLED GOODS NON-CONTROLLED GOODS DMC A 3. TITLE (The document title and sub-title as indicated on the title page.) A historical perspective on experimental acoustic processing systems at DRDC Atlantic 4. AUTHORS (last name, followed by initials ranks, titles, etc., not to be used) Olser, J.; Pecknold, S.; Inglis, G.; Stoddard, M. 5. DATE OF PUBLICATION (Month and year of publication of document.) March a. NO. OF PAGES (Total pages, including Annexes, excluding DCD, covering and verso pages.) 4 6b. NO. OF REFS (Total references cited.) 2 7. DOCUMENT CATEGORY (e.g., Scientific Report, Contract Report, Scientific Letter.) External Literature (N) 8. SPONSORING CENTRE (The name and address of the department project office or laboratory sponsoring the research and development.) DRDC Atlantic Research Centre Defence Research and Development Canada 9 Grove Street P.O. Box 1012 Dartmouth, Nova Scotia B2Y 3Z7 Canada 9a. PROJECT OR GRANT NO. (If appropriate, the applicable research and development project or grant number under which the document was written. Please specify whether project or grant.) 9b. CONTRACT NO. (If appropriate, the applicable number under which the document was written.) 10a. DRDC PUBLICATION NUMBER (The official document number by which the document is identified by the originating activity. This number must be unique to this document.) 10b. OTHER DOCUMENT NO(s). (Any other numbers which may be assigned this document either by the originator or by the sponsor.) DRDC-RDDC-2018-N014 11a. FUTURE DISTRIBUTION WITHIN CANADA (Approval for further dissemination of the document. Security classification must also be considered.) Public release 11b. FUTURE DISTRIBUTION OUTSIDE CANADA (Approval for further dissemination of the document. Security classification must also be considered.)

8 12. KEYWORDS, DESCRIPTORS or IDENTIFIERS (Use semi-colon as a delimiter.) sonar signal processing 13. ABSTRACT/RESUME (When available in the document, the French version of the abstract must be included here.)