WHO WE ARE. ITS holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA.

Size: px
Start display at page:

Download "WHO WE ARE. ITS holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA."

Transcription

1 WHO WE ARE and Non-destructive Examination Company operating within Western Canada. ITS holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA. We service Western Canada from two office locations, our head office located in Edmonton, Alberta and our district office located in Swift Current, Saskatchewan. This allows us to better service our clientele from a geographical perspective. We provide quality inspection and NDE services to the upstream and downstream oil & gas, petrochemical, pulp and paper, power generating and fabrication sectors throughout Western Canada. Our mission is to provide a safe, quality, and cost effective professional service to our clientele by training and motivating our staff to perform their work with integrity and professionalism. At ITS, public, environmental and personnel safety are at the forefront of our ideology; we are committed to providing a safe, integral, economic product to our clientele. We hold our CoR (Certificate of Recognition) through ACSA (Alberta Construction Safety Association) and ITS is on ISNetworld, ComplyWorks, PICS Canada and various other Safety orientated associations throughout the industry. We employ highly trained, honest, knowledgeable, and professional staff that specializes in providing technical expertise in integrity assessment, inspection and non-destructive examination services. We ensure we provide competent technicians and inspectors for the services required by our clientele. Through continued training and building upon our current knowledge base, we are able to provide our clientele with up-to-date inspection and examination techniques. Here at ITS, we take training very seriously and, with the ever changing industry, we believe that through continued training and education, we are able to provide the best services to our clientele.

2 GENERAL SERVICES Integrity Testing Services Inc. (ITS) holds a Certificate of Authorization Permit (CAP) under the AB-5I5 program from ABSA. ITS provides in-service pressure equipment assessments and visual inspections performed by PESL (Pressure Equipment Safety Legislation - Alberta) and PEI (Pressure Equipment In-Service - Saskatchewan) Class 1 and 2 certified inspectors. We work alongside our clients and with their IMS (Integrity Management System) manuals to provide integrity, inspection and NDE services compliant to their IMS programs. IBPV and IPV Certified Inspectors PEI Class 1 and 2 Inspectors API 510 Inspectors API 570 Inspectors API 653 Inspectors National Board Inspectors On-Stream Inspections Thorough Inspections Internal Inspections Periodic Inspections Shop Inspections (On behalf of owner-users) ITS offers storage tank assessment services performed by certified API 653 inspectors. We are capable of providing complete and thorough assessments of tanks. ITS has designed an in-depth training program with the consultation of MFE Enterprises for the operation and use of MFE 2412 Mark II and MFE 2412 Mark III tank floor scanners. In addition to assessment and inspection services, ITS offers NDE (Non-Destructive Examination) services: we provide highly trained and experienced certified technicians to perform code compliant examinations. Basic and Advanced NDE Services Ultrasonic Examination Services Magnetic Particle Examination Services Liquid Penetrant Examination Services Hardness Testing Services Magnetic Flux Leakage Examination Services Other NDE Services On-stream corrosion detection and monitoring programs Owner-user equipment inventory and equipment management Our inspection staff is multi-disciplined to provide cost effective assessment, inspection and/or examination services to our clientele. ITS strives to create longstanding partnerships with clientele to our mutual benefit. ITS offers turnaround pre-planning and inspection project management services and consulting. ITS in-service inspectors are available to offer management, consultation and recommendations on pressure equipment (based on previous history and operation) and current Owner-User IMS manuals. Here at ITS, we have an extensive reporting and administrative department. We provide specialized programming and software development for clientele needs. We manage integrity data, inspection records and equipment details. Presently, ITS manages numerous corrosion monitoring programs. We provide timely and accurate reports to our clientele. We pride ourselves on the quality of our reporting we produce to our clientele. We provide CADD (Computer Aided Design and Drafting) images of equipment under examination and we use ITS proprietary software to aid in the management of clientele data. We have web-based programs to aid in the sharing of information between clientele, field staff and our head office. We cannot begin to express how excited we are about potential partnerships and we will gladly answer any questions you may have. If there are services that you wish to discuss, please do not hesitate to contact us.

3 IN-TOWN SERVICES and Non-destructive Examination Company operating within Western Canada. We provide Quality Inspection and NDE Services to the fabrication sectors in Edmonton, AB; Swift Current, SK and surrounding area. ITS employs highly trained knowledgeable and professional staff that specialize in providing technical expertise in Intergrity Assessment, Inspection and NDE services. Through continued training and building upon our current knowledge base, we are able to provide our clientele with up-to-date inspection and examination techniques performed by competent staff. ITS is consistently on the cutting edge and the integrity and professionalism of the organization is exhibited by each individual. On behalf of Owner Users, ITS offers highly trained, experienced and certified (CWB, NB, API, IBPV, IPV, PEI Class 1, PEI Class 2) Inspectors, to perform code compliant inspections. Inspection Services include (but not limited to): Shop Inspections Vendor Audits (based on the Owner Users IMS Program) Vendor Surveillance Witnessing of Hydrostatic Tests, Pneumatic Tests, Function Tests, etc. On behalf of the Fabrication Facility, ITS offers on-site NDE (Non-Destructive Examination) services, we provide highly trained, experienced and certified CGSB Technicians, to perform new construction in-service, repair and alteration code compliant examinations. NDE Services include (but not limited to): Magnetic Particle Examination Black on White (Yoke Technique) Dry (Yoke Technique) Wet Fluorescent (Yoke Technique) Liquid Penetrant Examination Visible Water Wash Visible Solvent Removable Fluorescent Water Wash Fluorescent Solvent Removable Ultrasonic Examination Manual Straight Beam (Thickness and Volumetric Examination) Manual Shear-wave (Volumetric Examination, inclusive of pipe, plate, welds, etc.) Magnetic Flux Leakage Examination Hardness Testing Other NDE Services

4 QUALITY ASSURANCE SERVICES Integrity Testing Services Inc. (ITS) offers Quality Assurance and Quality Control services in relation to manufacturing (shop and field), installation (field), maintenance, repairs and alterations. We provide highly trained and experience certified inspectors to manage the quality of workmanship for a given project, in addition to Assessment, Inspection, and NDE (Non-Destructive Examination) services. ITS is capable of supplying QA/QC personnel to satisfy the ever growing demands of the industry. The following are types of personnel and services ITS is capable of supplying: Quality Assurance and Quality Control Management Services a. Drawing, Design, Calculation and Specification Control b. Material Control c. Welding / Brazing Control d. Welder / Brazer Qualification Control e. Examination and Inspection Control i. Nondestructive Examination ii. Heat Treatment iii. Hydrostatic / Pneumatic Testing Certified Personnel a. QA/QC Leads / Supervisors b. QA/QC Inspectors c. QA/QC Inspectors NRCan/CGSB NDE Examiners i. Ultrasonic Examiners ii. Magnetic Particle Examiners iii. Penetrant Testing Examiners iv. Hardness Testing Examiners v. Magnetic Flux Leakage Examiners QA/QC Administration Staff a. Document Control i. Management of Data and Reports (MTR s, Examination Reports, Hydro Reports, etc.) ii. Calibration Reports of Testing Equipment iii. Correction of Nonconformities iv. Records Retention

5 ENGINEERING SERVICES and Non-destructive Examination Company operating within Western Canada. Through partnerships with individual engineering firms (with the appropriate permit to practice), ITS is capable of providing engineering services such as: Consultation Frequently owner/users need to perform an inspection but may not know the best inspections to be performed. This is frequently encountered where equipment requires repairs but the extent of the damage is unknown and needs to be quantified to enable an effective repair to be performed. This can be associated with the recommendation of a repair method and then may be followed up by further inspection of the item during repair and/or when the repair is completed. This type of consultation ITS can aid in providing. Condition Status and Life Expectancy To determine the condition of a component, inspections may be performed; but owner/users may not have the knowledge to apply or evaluate the inspection data to provide a useful life expectancy or future inspection/maintenance requirements and this is where ITS can aid. Repairs and Alterations These are cases where owner/users know there are failed components but do not know if and how it can be repaired. This is where ITS can aid, there are opportunities to evaluate the failed item propose a weld repair and then perform the appropriate inspections. Material Selection (during a repair or alteration process) Recommendations regarding the selection of materials. This may include the proposal of alternative materials where the original material has been found to be inadequate or have given poor service due to corrosion/strength or fabrication limitations. Welding Process (during a repair or alteration process) Recommendations regarding welding processes/welding consumables. Assistance regarding weld procedures can be given, in specific cases provide a weld repair procedure (there are limitations associated with the developing of welding procedures). Fitness for Service A component of the fitness for service of pressure equipment is engineering and would provide additional resources for the work performed by the inspector.

Introduction to Fitness For Service November 10, 2016, University of Alberta, Edmonton.

Introduction to Fitness For Service November 10, 2016, University of Alberta, Edmonton. Advancing Your Career! November 10, 2016 University of Alberta Engineering Teaching and Learning Center, 6th floor room 060 (ETLC 6 060) 116 Street NW., Edmonton, AB T6G 2V4 About This Workshop This workshop

More information

Optional Training Courses - January 26, 2015

Optional Training Courses - January 26, 2015 Optional Training Courses - January 26, 2015 Risk-Based Inspection (8 Hours) Trainer: Lynne Kaley The details of API s recommended practices (API 580 and API 581) will be presented by recognized industry

More information

Engineering Design and Training Services

Engineering Design and Training Services PRESSURE VESSEL RELATED SERVICES: Pressure Vessels essels, Heat Exchangers,, Tanks Oil & Gas, Power,, Chemical, Petrochemical, Fertilizer etc. Engineering Design and Training Services Vision Statement

More information

Maverick Inspection Ltd. has been pioneering specialized non-destructive testing in Western Canada

Maverick Inspection Ltd. has been pioneering specialized non-destructive testing in Western Canada TECHNOLOGY, EXPERTISE & SOLUTIONS Maverick Inspection Ltd. has been pioneering specialized non-destructive testing in Western Canada since 1994. As a Canadian-owned and operated company, we have earned

More information

DACON INSPECTION SERVICES. Phased Array Ultrasonic Testing

DACON INSPECTION SERVICES. Phased Array Ultrasonic Testing Phased Array Ultrasonic Testing Who we are Conventional and Advanced NDT and Inspection Services Oil and Gas, Refinery, Petrochemical, Heavy Industry, Mining Over 400 personnel including more than 300

More information

Hard Drilling, Made Easier.

Hard Drilling, Made Easier. Hard Drilling, Made Easier. The Mission Our goal here at Nuvidrill, is to supply the best equipment available for any drilling project and leverage the value of customer investment by ensuring optimal

More information

RRC POWER & ENERGY STATEMENT OF QUALIFICATIONS. experience matters

RRC POWER & ENERGY STATEMENT OF QUALIFICATIONS.  experience matters RRC POWER & ENERGY STATEMENT OF QUALIFICATIONS www.rrccompanies.com experience matters At the heart of a successful project lies a team of experts who can convert their knowledge to project results. Our

More information

Waukesha Foundry. Industry Experience Engineering Expertise

Waukesha Foundry. Industry Experience Engineering Expertise Waukesha Foundry Industry Experience Engineering Expertise Advanced Technology Experience an Industry Leader Waukesha Foundry has earned a reputation as an innovator in the production of high-quality cast

More information

Turning the wheels of your success

Turning the wheels of your success INDUSTRIAL SERVICES Turning the wheels of your success A comprehensive package of integrated services combining traditional certification and inspection with innovative business solutions based on the

More information

(AMMA) American Maritime Modernization Association

(AMMA) American Maritime Modernization Association (AMMA) American Maritime Modernization Association AUDIT GUIDE FOR THE EVALUATION OF AMMA MEMBER WELDING, BRAZING, AND NON-DESTRUCTIVE TESTING (NDT) PROGRAMS Revised By: Joe Frith, AMMA Welding/Brazing/NDT

More information

The use of FRP & Dual Laminates

The use of FRP & Dual Laminates AC Plastiques The use of FRP & Dual Laminates to solve all your corrosion problems w w w. a c p l a s t i q u e s. c o m Approved and acclaimed piping technology: Exabond 1395, montée Chénier, Les Cèdres,

More information

CONSOLIDATED FABRICATION: THE INDUSTRIAL BACKBONE

CONSOLIDATED FABRICATION: THE INDUSTRIAL BACKBONE Consolidated Fabrication & Constructors, Inc. WRITTEN BY CARIN HALL PRODUCED BY ALEX HORTARIDIS CONSOLIDATED FABRICATION: THE INDUSTRIAL BACKBONE CONSOLIDATED FABRICATION & CONSTRUCTORS SUPPORTS THE NATION

More information

Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)

Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS

More information

The Essentials of Pipeline Integrity Management

The Essentials of Pipeline Integrity Management TRAINING METHODOLOGY This interactive training workshop includes the following training methodologies : Lectures Video Discussion of case histories and hands on calculations WHO SHOULD ATTEND The course

More information

Ritch Rappel Enbridge

Ritch Rappel Enbridge Ritch Rappel Enbridge Pipeline Safety Trust October 21, 2016 Quality is Free When it is Done Right. n Inspection does more quantity survey than quality documentation." n Each inspector is required to complete

More information

REPUBLIC OF KENYA MINISTRY OF MINISTRY OF INDUSTRY, TRADE AND COOPERATIVES KENYA PETROLEUM TECHNICAL ASSISTANCE PROJECT

REPUBLIC OF KENYA MINISTRY OF MINISTRY OF INDUSTRY, TRADE AND COOPERATIVES KENYA PETROLEUM TECHNICAL ASSISTANCE PROJECT REPUBLIC OF KENYA MINISTRY OF MINISTRY OF INDUSTRY, TRADE AND COOPERATIVES KENYA PETROLEUM TECHNICAL ASSISTANCE PROJECT TERMS OF REFERENCE FOR CONSULTANCY SERVICES FOR REVIEW AND UPDATE OF OIL AND GAS

More information

2019 CALL FOR ABSTRACTS

2019 CALL FOR ABSTRACTS 2019 CALL FOR ABSTRACTS Oil, Gas, and Chemical Industry Sectors Covered: Upstream (Drilling, Sub Sea, Production Systems, Integrity Management) Midstream (Pipelines, Terminals) Downstream (Refining, Chemical

More information

COMPANY PROFILE FOR ELECTRICAL / ENGINEERING PROJECTS & SERVICES

COMPANY PROFILE FOR ELECTRICAL / ENGINEERING PROJECTS & SERVICES OUR PROFESSIONAL COMPETENCE, YOUR BUSINESS ADVANTAGE COMPANY PROFILE FOR ELECTRICAL / ENGINEERING PROJECTS & SERVICES For Our Valuable Clients CONTRACT MANAGERS: AMS MARINE SERVICES PRIVATE LIMITED Om

More information

Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).

Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...

More information

Inspection and Test Plan for Water Tube Boiler

Inspection and Test Plan for Water Tube Boiler www.inspectionforindustry.com Inspection and Test Plan for Water Tube Boiler No. AND TEST PLAN REFERENCE DOCUMENT ACCEPTANCE CRITERIA VERIFING DOCUMENT ACTIVITY BY MANUF. TPI CLIENT REMARK 1 PRE MEETING

More information

MEC-QW-E-2002 Senior QA/QC Welding Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS

MEC-QW-E-2002 Senior QA/QC Welding Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS 101835-MEC-QW-E-2002 Senior QA/QC Welding Engineer Holds a B. Sc. in Mechanical Power Engineering and has about 15 years hands-on experience working as QA/QC Engineer & Welding Inspector in several industrial

More information

Welding Inspection Management

Welding Inspection Management The Practical Reference Guide for Welding Inspection Management Visual Inspection of Pressure Vessels and Pressure Piping THE PRACTICAL REFERENCE GUIDE for WELDING INSPECTION MANAGEMENT Visual Inspection

More information

SERVICE IN ACTION. : Jackup Drilling Rig. : Johor Bahru Malaysia (on-site) DURATION : 4 days on-site STATUS : Periodic maintenance ACTIVITIES

SERVICE IN ACTION. : Jackup Drilling Rig. : Johor Bahru Malaysia (on-site) DURATION : 4 days on-site STATUS : Periodic maintenance ACTIVITIES Jackup ASSET LOCATION : Jackup : Johor Bahru Malaysia (on-site) DURATION : 4 days on-site STATUS : Periodic maintenance ACTIVITIES Inspection, maintenance and recertification SCOPE OF WORK Conduct on-site

More information

Clear Solutions to Oily Water Separation and Treatment

Clear Solutions to Oily Water Separation and Treatment Clear Solutions to Oily Water Separation and Treatment www.roviconoilfields.com info@roviconoilfields.com KM 2 IGBO-ETCHE ROAD, RUMUKWURUSI PORT-HARCOURT, RIVERS STATE. USA Office: 12808 WEST AIRPORT BLVD.

More information

General Presentation. EARTO WORKING GROUP Quality and Excellence in RTO Management. Presentation

General Presentation. EARTO WORKING GROUP Quality and Excellence in RTO Management. Presentation EARTO WORKING GROUP Quality and Excellence in RTO Management Presentation Who is AIMEN? The Technology Centre AIMEN was established in Vigo (Spain) in 1967, promoted by a group of companies to provide

More information

The global magazine for pump users and suppliers

The global magazine for pump users and suppliers The global magazine for pump users and suppliers COVER REPORT: Viking Pump continues its legacy with innovations and expansions Page 8 Special Topic: Oil & Gas In this issue of Pump Engineer magazine:

More information

SPOOLBASE & MULTIJOINT SERVICES

SPOOLBASE & MULTIJOINT SERVICES SPOOLBASE & MULTIJOINT SERVICES PIPELINE FABRICATION COMPANY PROFILE Pipeline Technique is a world leading provider of solutions to the oil and gas industry for the most demanding challenges in Welding,

More information

HIGH TECH FOR HIGH PURITY

HIGH TECH FOR HIGH PURITY HIGH TECH FOR HIGH PURITY 02 HISTORY 1946 Company founding as a metalworking shop in Munich 1962 First installation of a high purity gas system at the SIEMENS AG, Munich 1991 Opening of a subsidiary in

More information

W E C A N M A K E I T.

W E C A N M A K E I T. W E C A N M A K E I T. ISO 9001 CERTIFIED TRUSTED WELDING AND FABRICATING SINCE 1935. 2 www.rileywelding.com WORK WITH HISTORY Founded in 1935, Riley Welding & Fabricating is a family-owned custom welding

More information

Module 4 Design for Assembly IIT BOMBAY

Module 4 Design for Assembly IIT BOMBAY Module 4 Design for Assembly Lecture 8 Case Studies - IV Instructional objectives The objective of this lecture is to exhibit how real components are designed in industry following some of the principles

More information

HIGH TECH FOR HIGH PURITY

HIGH TECH FOR HIGH PURITY HIGH TECH FOR HIGH PURITY - HISTORY Company founding as a metalworking shop in Munich First installation of a high purity gas system at the SIEMENS AG, Munich Making history the innovative way The history

More information

ENGINEERING INNOVATION

ENGINEERING INNOVATION ENGINEERING INNOVATION ENGINEERING INNOVATION Viper Subsea provides control system distribution solutions for the global subsea oil and gas industry. Our product and service offering covers the full life

More information

The Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing

The Evolution & Future of API Coiled Tubing Standards. Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing The Evolution & Future of API Coiled Tubing Standards Ryan Addison Tenaris Coiled Tubes API Co-Chairman Resource Group for Coiled Tubing API Overview Presentation Outline Resource Group on Coiled Tubing

More information

INSTRUMENTATION DESIGN ENGINEERING: Oil & Gas

INSTRUMENTATION DESIGN ENGINEERING: Oil & Gas SmartBrains Engineers & Technologist Pvt. Ltd. DESIGN ENGINEERING: Oil & Gas Building Nation Through SmartBrains Skill Development & Enterpreneurship Website : www.samrtbrains.in To Apply Please contact

More information

It all starts here. Format fermé : 9" x 12" Format ouvert : 18 x 12 Marges : 0,125" Couleurs : CMYK

It all starts here. Format fermé : 9 x 12 Format ouvert : 18 x 12 Marges : 0,125 Couleurs : CMYK It all starts here 4521, rue clark, montréal (québec) H2T 2T3 t. 514.286.9696 f. 514.284.9152 espressocommunication.com Date : 3 septembre 2010 Client : Ultragen Projet : ULT1001_Brochure EN Numéro d épreuve:

More information

Reliance Industries Limited

Reliance Industries Limited Reliance Industries Limited Notice Inviting Expression of Interest (RIL/E&P/EOI/2010/05) (Under International Competitive Bidding) For BLOCK NO : KG-DWN-98/3 (KG D6) Reliance Industries Limited (RIL),

More information

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter. Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings

More information

Multiple services, singular solutions. for the Oil, Gas & Petrochemical Industry

Multiple services, singular solutions. for the Oil, Gas & Petrochemical Industry Multiple services, singular solutions for the Oil, Gas & Petrochemical Industry A.HAK INDUSTRIAL SERVICES CALL US HIS PROTECTING YOUR INVESTMENT At A.Hak Industrial Services (better known as HIS) we provide

More information

Nondestructive Testing (CALIBRATION)

Nondestructive Testing (CALIBRATION) NONDESTRUCTIVE TESTING (CALIBRATION) HPI Nondestructive Testing (CALIBRATION) Hybrid Petroleum institute His allies at all times Calibration of Nondestructive Testing Devices (PND's) INTRODUCTION Nondestructive

More information

OILMEX OILMEX BUSINESS GROUP. WELCOME. their processes of design, construction and quality in their diverse management of projects.

OILMEX OILMEX BUSINESS GROUP. WELCOME. their processes of design, construction and quality in their diverse management of projects. OILMEX OILMEX BUSINESS GROUP. WELCOME OILMEX BUSINESS GROUP emerges from the specific need of the Mexican oil industry to streamline their processes of design, construction and quality in their diverse

More information

INSPECTION AND TEST PLAN

INSPECTION AND TEST PLAN BOILER AND TEST PLAN No. AND TEST PLAN REFERENCE DOCUMENT ACCEPTANCE CRITERIA VERIFING DOCUMENT ACTIVITY BY MANUF. TPI CLIENT REMARK 1 PRE MEETING SPEC. SPEC. MOM H H H Before Manufacturing 2 DWG, DESIGN,

More information

Leading Edge Technology. Advanced Corrosion Technologies & Training

Leading Edge Technology. Advanced Corrosion Technologies & Training Leading Edge Technology Advanced Corrosion Technologies & Training Leading Edge Technology About ACTT Advanced Corrosion Technologies & Training, LLC (ACTT) exists to detect corrosion before it becomes

More information

Educ8 Engineering. Apprenticeship (NVQ/QCF) Levels 2, 3 and 4

Educ8 Engineering. Apprenticeship (NVQ/QCF) Levels 2, 3 and 4 Educ8 Engineering Apprenticeship (NVQ/QCF) Levels 2, 3 and 4 Are you thinking of growing your business? Do you need to consider succession planning? Does your current workforce need upskilling? If the

More information

CORPORATE QUALITY SYSTEM PROCEDURE

CORPORATE QUALITY SYSTEM PROCEDURE Number: JVICQC-14.0 03/07/2016 Revision: 5 Page: Page 1 of 6 Approvals Author Director of Quality Assurance Name: Gary Corley Doyle Cassity Signature: Date: 03/07/2016 03/07/2016 Electronic versions of

More information

Company Information JBS Team Key Services Facilities Contact Information

Company Information JBS Team Key Services Facilities Contact Information Company Information JBS Team Key Services Facilities Contact Information Company Information JBS Group Scotland is a family owned company with forty years experience of the oil and gas industry. Established

More information

Saving Lives Finding Solutions Making a Difference

Saving Lives Finding Solutions Making a Difference Saving Lives Finding Solutions Making a Difference Mission Statement Saving Lives, Finding Solutions, Making a Difference We support our customers by providing the highest quality and most responsive technical

More information

Specifications for EA31002 U Tube Bundle for CDU 3

Specifications for EA31002 U Tube Bundle for CDU 3 Specifications for EA31002 U Tube Bundle for CDU 3 Tube Bundle Specificatio Tube Bundle for Heat Exchanger EA31002A/B/C/D Quantity required : One with Dummy shell Exchanger Type: BEU Horizontal No of U

More information

SECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.

SECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. SECTION 051200 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting

More information

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for

More information

Lifting Engineering. Capability & Experience

Lifting Engineering. Capability & Experience Lifting Engineering Capability & Experience Results for our customers The WorleyParsons consulting group is a collaborative, multidisciplinary team with a broad range of strategic, technical and project

More information

World-class metal fabrication solutions

World-class metal fabrication solutions World-class metal fabrication solutions Mining Industrial Commercial FIND OUT MORE AT WWW.WESTERNMETALWORX.COM.AU FABRICATING SOLUTIONS FOR CHALLENGING PROJECTS Western Metalworx provide world-class metal

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du

More information

Radar Tank Gauging for Asphalt Inventory Measurement

Radar Tank Gauging for Asphalt Inventory Measurement White Paper November 6, 2009 Radar Tank Gauging for Asphalt Inventory Measurement This document describes the correct selection of a radar tank gauge for inventory measurement and maintainability on an

More information

Weldment Visual Inspection Requirements

Weldment Visual Inspection Requirements Table of Contents 1.0 Purpose / Scope / Timing... 2 1.1 Purpose / Scope... 2 1.2 Compliance Date... 2 2.0 Procedure / Quality Recd Requirements... 2 2.1 General Requirements... 2 2.2 Acceptance Criteria...

More information

SAUDI ARABIA FUGRO-SUHAIMI LTD. UNDERSTANDING your operational objectives. TACKLING your complex challenges. DELIVERING your global success stories

SAUDI ARABIA FUGRO-SUHAIMI LTD. UNDERSTANDING your operational objectives. TACKLING your complex challenges. DELIVERING your global success stories SAUDI ARABIA FUGRO-SUHAIMI LTD. UNDERSTANDING your operational objectives TACKLING your complex challenges DELIVERING your global success stories FUGRO-SUHAIMI LTD Fugro-Suhaimi Ltd (FSL) a 50/50 partnership

More information

MARISSUBSEA.com. Core Values. People. Integrity. Quality. Contents. 02/03 What we do. 04/05 Representatives. 06/07 ROV personnel

MARISSUBSEA.com. Core Values. People. Integrity. Quality. Contents. 02/03 What we do. 04/05 Representatives. 06/07 ROV personnel MARISSUBSEA.com Contents 02/03 What we do 04/05 Representatives 06/07 ROV personnel 08/09 Hydrographic personnel 10/11 Diving personnel 12/13 Additional disciplines Core Values People Our people make our

More information

AFAAL AL KHALEEZ GEN. CONT. EST.

AFAAL AL KHALEEZ GEN. CONT. EST. Summary AAAL AL KHALEEZ GEN. CONT. EST. has worked with clients from different countries and business lines, hence have a broad range of experience in across the processing industries. We have immense

More information

FOR RELEASE MAY 19, 2016

FOR RELEASE MAY 19, 2016 FOR RELEASE MAY 19, 2016 TRAYLOR BROS. TO ACQUIRE FIFTY PERCENT OWNERSHIP OF STERLING BOILER & MECHANICAL INC., A&D CONTRACTORS INC., AND ONYETT FABRICATORS (EVANSVILLE, IN, May 19, 2016) Traylor Bros.,

More information

Keeping Your House in order?

Keeping Your House in order? Keeping Your House in order? A view on Safety Reviews from UK Offshore experience Ian Wright Business Development Director, Upstream DNV Energy, Europe & North Africa March 2009 Introduction Safety Performance

More information

DE059: Hydrocarbon Production Operations

DE059: Hydrocarbon Production Operations DE059: Hydrocarbon Production Operations DE059 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This five-day course will provide the participants with an integrated view of the hydrocarbon

More information

Scope/Purpose of SI Training:

Scope/Purpose of SI Training: manufactured equipment and materials at the supplierfacility, and, confirming that the supplier s quality management system is being utilizedeffectively. There is no specific minimum experience requirement

More information

National Craft Assessment and Certification Program S P E C I F I C A T I O N S

National Craft Assessment and Certification Program S P E C I F I C A T I O N S National Craft Assessment and Certification Program S P E C I F I C A T I O N S BOILERMAKER PRESSURE VESSEL V2 BLMK34_02 October 2014 Focus Statement A journey level boilermaker is skilled in all aspects

More information

Ultrasonic sensors in subsea oil & gas production current use and opportunities

Ultrasonic sensors in subsea oil & gas production current use and opportunities Ultrasonic sensors in subsea oil & gas production current use and opportunities By Bjørn Stevning Hole Senior Product Engineer, TechnipFMC 5/31/2018 Page footer text 1 What is ultrasound and how can ultrasound

More information

Capability Presentation. Subsea Sampling Richard Barr Thursday 8 February

Capability Presentation. Subsea Sampling Richard Barr Thursday 8 February Capability Presentation Subsea Sampling Richard Barr Thursday 8 February Setting the scene The cynics say that we are a cyclical industry that never learns its lessons. Well this time we have an opportunity

More information

FLANGE INTEGRITY MANAGEMENT

FLANGE INTEGRITY MANAGEMENT FLANGE INTEGRITY MANAGEMENT Stork provides integrated machining, bolting & flange management solutions to the Oil & Gas, Subsea, Chemical & Power industries WWW.STORK.COM 1 OUR VALUE DRIVEN APPROACH TO

More information

EXECUTIVE SUMMARY. 1 Page. Customer Case Study Waiward: Looking Back & Looking Ahead: Technology Pays Off. CUSTOMER NAME: Waiward Steel Fabricators

EXECUTIVE SUMMARY. 1 Page. Customer Case Study Waiward: Looking Back & Looking Ahead: Technology Pays Off. CUSTOMER NAME: Waiward Steel Fabricators Waiward: Looking Back & Looking Ahead: Technology Pays Off Terry Degner, President and Rob Wright, V.P. Shop Operations Manager. EXECUTIVE SUMMARY CUSTOMER NAME: Waiward Steel Fabricators INDUSTRY: Oil

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 28781 First edition 2010-08-15 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment Industries du pétrole et

More information

SPECIALISTS

SPECIALISTS Bending & Rolling SPECIALISTS www.bendtechgroup.com.au Our 200NB x 12mm wall, pipe bender makes us one of the largest, low cost and efficient benders in Australia Over 30 years of market leading bending,

More information

Technical excellence: delivered

Technical excellence: delivered Alderley Alderley A leading designer and manufacturer of bespoke metering, hydraulic control systems and produced water treatment solutions Corporate Brochure Technical excellence: delivered Alderley Group

More information

SILVERBROOK DRILLING SERVICES CAPABILITY PROFILE 1. Contact Details

SILVERBROOK DRILLING SERVICES CAPABILITY PROFILE 1. Contact Details SILVERBROOK DRILLING SERVICES CAPABILITY PROFILE 1. Contact Details Firm Name: Silverbrook Drilling Street address 492 Linthorpe Rd, Pittsworth, Qld 4350 Main Contacts Carol McIntyre Owner / Manager Chris

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Ultrasonic thickness measurement

ISO INTERNATIONAL STANDARD. Non-destructive testing Ultrasonic thickness measurement INTERNATIONAL STANDARD ISO 16809 First edition 2012-11-15 Non-destructive testing Ultrasonic thickness measurement Essais non destructifs Mesurage de l'épaisseur par ultrasons Reference number ISO 2012

More information

Industry & Govt Changes Post Macondo

Industry & Govt Changes Post Macondo Cover graphic should fill and not exceed the defined grey box. Industry & Govt Changes Post Macondo Gary F. Devlin VP Quality & Customer Experience March 2013 Deepwater Industry / Focus Approach Joint

More information

Nondestructive testing solutions

Nondestructive testing solutions Nondestructive testing solutions Dedicated and proud Magnaflux customers are our most important focus: They drive us to be our best as we follow our mission creating marketleading NDT products and processes.

More information

A BIT ABOUT US. All day, every day, IDEAL has well-trained, experienced, and responsive staff available to assist you with all of your urgent needs.

A BIT ABOUT US. All day, every day, IDEAL has well-trained, experienced, and responsive staff available to assist you with all of your urgent needs. CORPORATE PROFILE A BIT ABOUT US IDEAL Manufacturing, Inc. holds the International Patents for the proprietary STELCOR Drilled-In Displacement Micropile. In addition to the STELCOR Pile, we also manufacture

More information

Table of contents: Welding Inspection Site Painting, Coating and Inspection Plant Inspection & Management NDT - Surface Testing

Table of contents: Welding Inspection Site Painting, Coating and Inspection Plant Inspection & Management NDT - Surface Testing Table of contents: Welding Inspection 1. Visual Welding Inspector - Level 1 (3.0) 2. Welding Inspector Level 2 (3.1) 3. Senior Welding Inspector Level 3 (3.2) 4. AWS CWI to CSWIP Welding Inspector Level

More information

SECTION 2. VISUAL INSPECTION

SECTION 2. VISUAL INSPECTION SECTION 2. VISUAL INSPECTION 5-15. GENERAL. Visual inspection is the oldest and most common form of NDI for aircraft. Approximately 80 percent of all NDI procedures are accomplished by the direct visual

More information

GAS GATHERING LINES. Presented to OHIO GAS ASSOCIATION 2012 Technical Seminar Seminar. March 29, 2012 Marriott Columbus Northwest Hotel

GAS GATHERING LINES. Presented to OHIO GAS ASSOCIATION 2012 Technical Seminar Seminar. March 29, 2012 Marriott Columbus Northwest Hotel GAS GATHERING LINES Presented to OHIO GAS ASSOCIATION 2012 Technical Seminar Seminar March 29, 2012 Marriott Columbus Northwest Hotel 5605 Blazer Parkway Dublin, Ohio 43017 by Paul E. Oleksa Oleksa and

More information

NDT-PRO Services expands service offering

NDT-PRO Services expands service offering NDT-PRO Services expands service offering NDT-PRO Services announced the formal release of two advanced NDT methods, Phased Array (including TOFD) and Eddy Current. What are they and where are the used?

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL Corporate Profile 2011 MICHIGAN PNEUMATIC TOOL Industrial Air Tools Serving All Industries Petro Chemical Construction Automotive Assembly Foundry Aircraft Rental 1-800-521-8104 www.michiganpneumatic.com

More information

New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines

New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines New Multi-Technology In-Line Inspection Tool For The Quantitative Wall Thickness Measurement Of Gas Pipelines A. Barbian 1, M. Beller 1, F. Niese 2, N. Thielager 1, H. Willems 1 1 NDT Systems & Services

More information

ISO 9001:2008 Certified Company. Marine Technical Services LLP

ISO 9001:2008 Certified Company. Marine Technical Services LLP ISO 9001:2008 Certified Company Marine Technical Services LLP Technology Without Limitation JIT Marine Technical Services JIT Construction Services JIT Engineering Services JIT Training Services Simplifying

More information

Certifications and Licenses

Certifications and Licenses Company OMPA is a qualified Oilfield Machine Shop with over 40 years experience in Manufacturing of Custom Designed Equipment, Threading Service and Precision Machining Service. It operates on a total

More information

MIL- B Rev NAVSEA 0900-LP

MIL- B Rev NAVSEA 0900-LP I: REQUIREMENTS 1. Identify the standard the supplier uses for performing brazing. MIL- B-007883B OTHER (IF Other, Specify :) MIL- B-007883 Rev NAVSEA 0900-LP-001-7000 II: ATTRIBUTES: YES NO 2a. Does a

More information

LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves

LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality

More information

STANDARD PHRASEOLOGY SECTION G. 1. This section of standard phraseology is for general use in piping disciplines.

STANDARD PHRASEOLOGY SECTION G. 1. This section of standard phraseology is for general use in piping disciplines. STANDARD PHRASEOLOGY SECTION G 1. This section of standard phraseology is for general use in piping disciplines. Hydrostatically test, using at PSIG for a minimum of minutes. Allowable leakage: None. G1

More information

Threaded Products Gaskets & Seals Precision Machining

Threaded Products Gaskets & Seals Precision Machining Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and

More information

Regulatory Reforms in Mexico Energy Production and Environmental Protection. A Technical Regulator for a New Market Frame

Regulatory Reforms in Mexico Energy Production and Environmental Protection. A Technical Regulator for a New Market Frame Regulatory Reforms in Mexico Energy Production and Environmental Protection A Technical Regulator for a New Market Frame February 12th, 2014 CONTENT Legal Framework Strategic Design Regulatory Policy Gradual

More information

Mr Gould was an adventurer with a great deal of passion for nature and energy

Mr Gould was an adventurer with a great deal of passion for nature and energy Mr Gould was an adventurer with a great deal of passion for nature and energy Gould is defined as: the discovery of an ideal wind region. But why is the name Gould associated with a wind region? Mr Gould

More information

Tel : +31 (0) Fax: +31 (0)

Tel : +31 (0) Fax: +31 (0) Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION

More information

7 Briefing. Responsible investor

7 Briefing. Responsible investor Issue Responsible investor 7 Briefing Monday, 5 th October 202 In 200, we accepted all 26 recommendations made by the Bly Report our internal investigation into the Deepwater Horizon incident. BP has committed

More information

Diverse Capabilities Targeted Solutions

Diverse Capabilities Targeted Solutions Diverse Capabilities Targeted Solutions Today s Leader, Tomorrow s Innovation As a vertically integrated manufacturer with direct control over the entire supply chain from raw materials to finished product,

More information

Oil & Gas Products and Services

Oil & Gas Products and Services 2015 Value Your Trust Oil & Gas Products and Services Company Profile AMAFHH Petro Services - APS www.amafhh-ps.com AMAFHH Petro Services Oil & Gas Industrial Products & Services (Upstream & Downstream)

More information

Uday B. Kale (M. Eng. Mechanical) Technical Director KUB Quality Services

Uday B. Kale (M. Eng. Mechanical) Technical Director KUB Quality Services Reserve early to avoid disappointment! Be the first API 570 Inspector in 2019! Sculpt Your Skills for the Inspection, Repair, Alteration, and Rerating of Oil & Gas In-Service Piping Systems! 05 th - 09

More information

DNVGL-CP-0338 Edition October 2015

DNVGL-CP-0338 Edition October 2015 CLASS PROGRAMME DNVGL-CP-0338 Edition October 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD DNV GL class

More information

IMPORTANCE OF INSULATION RESISTANCE

IMPORTANCE OF INSULATION RESISTANCE IMPORTANCE OF INSULATION RESISTANCE What is Good Insulation? Every electric wire in your plant whether it s in a motor, generator, cable, switch, transformer, etc., is carefully covered with some form

More information

Process Industries. Making a Visible Difference THE INSPECTION SPECIALISTS

Process Industries. Making a Visible Difference THE INSPECTION SPECIALISTS Process Industries Making a Visible Difference THE INSPECTION SPECIALISTS We believe good ingredients are the recipe for success Contracting Project Engineering Equipment Rental Inspectahire is one of

More information

illizwe Engineering Business Profile

illizwe Engineering Business Profile ILLIZWE Engineering PTY Ltd was formed in 2013. The founder developed a passion and discovered an opportunity in the industry from year 2004 while working as a Mechanical Engineer, and his main passion

More information

SEPARATOR INTERNALS. jci-group.com. Filtration & Separation Solutions. JCI Filtration & Separation Inc. JCI Cyclonics Ltd. JCI Sand Separators Ltd.

SEPARATOR INTERNALS. jci-group.com. Filtration & Separation Solutions. JCI Filtration & Separation Inc. JCI Cyclonics Ltd. JCI Sand Separators Ltd. TM Filtration & Separation Solutions SEPARATOR INTERNALS JCI Filtration & Separation Inc. JCI Cyclonics Ltd. JCI Sand Separators Ltd. jci-group.com JCI group of companies engineer and fabricate filtration

More information

MODELLING AND EXPERIMENTS FOR THE DEVELOPMENT OF A GUIDED WAVE LIQUID LEVEL SENSOR

MODELLING AND EXPERIMENTS FOR THE DEVELOPMENT OF A GUIDED WAVE LIQUID LEVEL SENSOR Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation NDE 2011, December 8-10, 2011 MODELLING AND EXPERIMENTS FOR THE DEVELOPMENT OF A GUIDED WAVE LIQUID LEVEL SENSOR Subhash N.N

More information

SECTION METAL FABRICATIONS

SECTION METAL FABRICATIONS SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM

More information