Compliance & Safety. Mark-Alexander Sujan Warwick CSI
|
|
- Esmond Nichols
- 6 years ago
- Views:
Transcription
1 Compliance & Safety Mark-Alexander Sujan Warwick CSI
2 What s wrong with this equation? Safe Medical Device #1 + Safe Medical Device #2 = Unsafe System (J. Goldman) 30/04/08 Compliance & Safety 2
3 Integrated Clinical Environments Multi-Vendor System Integration Plug-and-Play Network Integration 30/04/08 Compliance & Safety 3
4 Conformity Assessment Regulators address standards to manufacturers: design features & good process Manufacturer s declaration When risk associated with non-compliance is low Independent safety assessment Conducted by third party 30/04/08 Compliance & Safety 4
5 Audit of Healthcare Organisations Collects indicators of safe practices (risk management meetings held, participation in NRLS, reaction to medical device safety alerts etc) Focus often on financial risks 30/04/08 Compliance & Safety 5
6 Problems with the Equation Manufacturer is responsible for ensuring safety based on safety requirements during design Manufacturer has little control over how the device will be used, and in what kind of environment HC service provider needs to ensure that integration of devices results in a safe system, but does not have access to manufacturer data Difficult to anticipate operational interactions with devices from other manufacturers and non-medical devices Safety of resulting system, operations, maintenance not demonstrated 30/04/08 Compliance & Safety 6
7 From Checklists to Goal-Based Assurance Prescriptive standards are slow to change Do not easily support change & innovation ISO (Risk Management) Goal-based assurance: manufacturer needs to demonstrate that assurance goals have been met 30/04/08 Compliance & Safety 7
8 IEC Application of risk management for ITnetworks incorporating medical devices Application of ISO to IT-networks Addressed to both manufacturers and responsible organisation 30/04/08 Compliance & Safety 8
9 Responsibilities Manufacturer: Risk management for medical device Providing accompanying documents: safetyrelated application conditions, how to integrate, relevant information from risk analysis) Responsible Organisation: Appoint roles (IT Integration Risk Manager) Risk management during integration, operation, maintenance Whole life-cycle risk management 30/04/08 Compliance & Safety 9
10 Goal-Based Assurance How to demonstrate compliance? How to facilitate handover of relevant information? How to tie together different phases of the life-cycle? 30/04/08 Compliance & Safety 10
11 Safety Assessment & Safety Arguments in Industry Demonstration of safety has a long-standing tradition in some industries Often introduced after major disasters Nuclear: Three Mile Island (1979) Off-Shore: Piper Alpha (1988) Railways & Infrastructure: King s Cross fire (1987), Ladbroke Grove (1999) Build systems that are demonstrably safe 30/04/08 Compliance & Safety 11
12 Assurance Case An assurance case should communicate a clear, comprehensive and defensible argument that a system is acceptably dependable to operate in a particular context 30/04/08 Compliance & Safety 12
13 Structured Assurance Cases Sub- Goal Sub- Goal Solution / Evidence Goal / Claim Standard followed Sub- Goal Solution / Evidence Safety Sub- Goal Solution / Evidence Testing results System meets acceptance criteria Solution / Evidence Simulation results 30/04/08 Compliance & Safety 13
14 Top-Level Argument Description of environment etc C G1: Medical Device is acceptably safe in specific environment List of global assumptions A Argue safety over the whole life-cycle by showing that requirements have been identified and will be met throughout. S G1.1: Satisfactory set of safety requirements has been determined Volume 1 G1.2: Safety requirements are met in the design G1.4: Safety requirements continue to be met G1.3: Safety requirements are met in operational use Volume 2 30/04/08 Compliance & Safety 14
15 G1.1: Satisfactory set of safety requirements has been determined Relevant standards including ISO have been met and information for RO has been specified S G1.1.1: Relevant standards met G1.1.2: All hazards identified and ALARP G1.1.3: Safety-related application conditions specified 30/04/08 Compliance & Safety 15
16 ISO Template Example -> ASCE demo 30/04/08 Compliance & Safety 16
17 Opportunities Integration of data and assumptions from device manufacturer and service provider by developing an argument over whole life-cycle Applicable for modern Integrated Healthcare Environments: Multi-vendor integration, PnP Templates can facilitate conformity assessment 30/04/08 Compliance & Safety 17
18 Challenges Lack of experience in Responsible Organisations Many devices normally do not require an assurance case but could cause harm in operation indirectly Complexity of managing assurance cases for large networked systems including diverse actors 30/04/08 Compliance & Safety 18
19 Some Resources Eurocontrol Safety Case Development Manual s/safetycasedevmanual.pdf Collection of Safety Cases including Eurocontrol RVSM Pre- Implementation Safety Case Railways Yellow Book (Safety Management System) Def-Stan (Safety Management Requirements for Defence Systems) 30/04/08 Compliance & Safety 19
20 Some Activities EWICS TC7 Medical Devices Sub- Group SAFECOMP 2008 (22 25 September, Newcastle) 3 rd European Workshop on Medical Device Safety (25 September, Newcastle) 30/04/08 Compliance & Safety 20
21 30/04/08 Compliance & Safety 21
22 Elements of an Assurance Case (Kelly, 1998) 30/04/08 Compliance & Safety 22
23 ASS2 A G G1.2 G1.2.1 Argument G1.2.2 G S ASS3: Hospital Information System available & accessible A Identify interactions that could not be predicted on the individual device level or without overarching system model. G G S1 Intensive Care: Pharmacy: Maintenance schedule S3 G1: Label printer available ASS1: Pharmacy system accessible A G2: Time until drugs available <x Maintenance schedule Backup printer Automatic Dispensing Unit Manual backup 30/04/08 Compliance & Safety 23
24 IEC Medical Electrical Equipment General Requirements for Safety 4.2 Risk Management Process for ME Equipment or ME Systems A RISK MANAGEMENT PROCESS complying with ISO shall be performed 30/04/08 Compliance & Safety 24
25 Risk Management Identify hazards (i.e. things that can go wrong) Define safety objectives (i.e. the maximum permissible frequency of occurrence) Define safety requirements (i.e. means to prevent things from going wrong) 30/04/08 Compliance & Safety 25
26 Possible Scenario Consultation Medication administration (source: Cambridge Consultants) Pathology lab 30/04/08 Compliance & Safety 26
Goal-Based Safety Cases for Medical Devices: Opportunities and Challenges
Goal-Based Safety Cases for Medical Devices: Opportunities and Challenges Mark-Alexander Sujan 1, Floor Koornneef 2, and Udo Voges 3 1 Health Sciences Research Institute, University of Warwick, Coventry
More informationGlobal Harmonization Task Force
Global Harmonization Task Force How to minimize risks without constraining innovation and harming free trade The role of international standards And their application at regional and national levels Cornelis
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 28380-2 First edition 2014-02-15 Health informatics IHE global standards adoption Part 2: Integration and content profiles Informatique de santé Adoption des normes globales IHE
More informationTHE USE OF A SAFETY CASE APPROACH TO SUPPORT DECISION MAKING IN DESIGN
THE USE OF A SAFETY CASE APPROACH TO SUPPORT DECISION MAKING IN DESIGN W.A.T. Alder and J. Perkins Binnie Black and Veatch, Redhill, UK In many of the high hazard industries the safety case and safety
More informationSafety Cases for Medical Devices and Health IT: Involving Healthcare Organisations in the Assurance of Safety. Mark A. Sujan
Safety Cases for Medical Devices and Health IT: Involving Healthcare Organisations in the Assurance of Safety Mark A. Sujan Warwick Medical School, University of Warwick, Coventry CV4 7AL, UK m-a.sujan@warwick.ac.uk
More informationSystem Safety. M12 Safety Cases and Arguments V1.0. Matthew Squair. 12 October 2015
System Safety M12 Safety Cases and Arguments V1.0 Matthew Squair UNSW@Canberra 12 October 2015 1 Matthew Squair M12 Safety Cases and Arguments V1.0 1 Introduction 2 Overview 3 Methodology 4 But do safety
More informationMasao Mukaidono Emeritus Professor, Meiji University
Provisional Translation Document 1 Second Meeting Working Group on Voluntary Efforts and Continuous Improvement of Nuclear Safety, Advisory Committee for Natural Resources and Energy 2012-8-15 Working
More informationChapter 19 Section 4
Health Insurance Portability and Accountability Act (HIPAA) of 1996 Chapter 19 Section 4 Health Insurance Portability And Accountability Act (HIPAA) Standard Unique Health Identifier For Health Care Providers
More informationOutline. Outline. Assurance Cases: The Safety Case. Things I Like Safety-Critical Systems. Assurance Case Has To Be Right
Assurance Cases: New Directions & New Opportunities* John C. Knight University of Virginia February, 2008 *Funded in part by: the National Science Foundation & NASA A summary of several research topics
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16142-1 First edition 2016-03-01 Medical devices Recognized essential principles of safety and performance of medical devices Part 1: General essential principles and additional
More informationThe Role of Patients in Transitions of Care
Play an Active Role It is crucial that you play an active role in your own healthcare. During treatment, you may see more than one provider. You also may visit more than one care setting. In each case,
More informationRequirements and Safety Cases
Requirements and Safety Cases Prof. Chris Johnson, School of Computing Science, University of Glasgow. johnson@dcs.gla.ac.uk http://www.dcs.gla.ac.uk/~johnson Introduction Safety Requirements: Functional
More informationChapter 19 Section 4
Health Insurance Portability and Accountability Act (HIPAA) of 1996 Chapter 19 Section 4 Health Insurance Portability And Accountability Act (HIPAA) Standard Unique Health Identifier For Health Care Providers
More informationKOHL S TE ST P ROTOCOL Approved: Feb 9, 2018
LABELING Battery -Operated Toys 6.5 Toys use more than one battery to power an electric circuit shall be labeled: - Do Not Mix Old And New Batteries - Do not mix alkaline, standard (carbonzinc), or rechargeable
More informationApplication Guidance Notes: Technical Information from Cummins Generator Technologies
Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 007 - Testing POLICY The following is offered as an eplanation of the policy and procedures followed by Cummins
More informationDeviational analyses for validating regulations on real systems
REMO2V'06 813 Deviational analyses for validating regulations on real systems Fiona Polack, Thitima Srivatanakul, Tim Kelly, and John Clark Department of Computer Science, University of York, YO10 5DD,
More informationGeneral Manager Assurance and Risk Management in Oakton;
AHSPO Conference C f Is it a Legal Catch Probity & Management Management 23 O October t b 2009 My Background Chartered Accountant and Certified Internal Auditor; General Manager Assurance and Risk Management
More informationHarmonization of Nuclear Codes & Standards Pacific Nuclear Council Working and Task Group Report
Harmonization of Nuclear Codes & Standards Pacific Nuclear Council Working and Task Group Report 1. Introduction By S. S Dua PNC Working Group/Task Group Chair Atomic Energy of Canada Ltd. Canada This
More informationIMHA Research. In short it is addressing two questions:
IMHA Research Vision IMHA Research will promote and facilitate the conduct of maritime health research and encourage collaboration within and across disciplinary boundaries to establish evidence that will
More informationGUIDE 75. Strategic principles for future IEC and ISO standardization in industrial automation. First edition
GUIDE 75 First edition 2006-11 Strategic principles for future IEC and ISO standardization in industrial automation Reference number ISO/IEC GUIDE 75:2006(E) GUIDE 75 First edition 2006-11 Strategic principles
More informationA Case for Regulatory Framework
01 June 2011 Nuclear Process Regulatory Licensing Adv Boyce Mkhize, NNR CEO NIASA CTICC Localization Conference : A Case for Regulatory Framework To ensure high levels of safety and institutionalisation
More informationABF SYSTEM REGULATIONS
ABF SYSTEM REGULATIONS 1. INTRODUCTION 1.1 General Systems are classified according to the characteristics of their opening and overcalling structures, and will be identified by colour coding. In determining
More informationRobert A. Martin 19 March 2018
Robert A. Martin 19 March 2018 Students helped assemble a collection of commercial IoT devices and record their RF emissions 369 Requests for Information 299 Requests to Register 131 Teams entered
More informationBIODEX MULTI- JOINT SYSTEM
BIODEX MULTI- JOINT SYSTEM CONFORMANCE TO STANDARDS 850-000, 840-000, 852-000 FN: 18-139 5/18 Contact information Manufactured by: Biodex Medical Systems, Inc. 20 Ramsey Road, Shirley, New York, 11967-4704
More informationAustralian Standard. Design review AS IEC IEC 61160, Ed.2 (2005) AS IEC
AS IEC 61160 2008 IEC 61160, Ed.2 (2005) AS IEC 61160 2008 Australian Standard Design review This Australian Standard was prepared by Committee QR-005, Dependability. It was approved on behalf of the Council
More informationGE/GN8648. Guidance on Positioning of Lineside Telephones. Rail Industry Guidance Note for GE/RT8048
GN This document contains one or more pages which contain colour. Published by: Block 2 Angel Square 1 Torrens Street London EC1V 1NY Copyright 2013 Rail Safety and Standards Board Limited GE/GN8648 Issue
More informationA Process Assessment Model for Assessing the Risk Associated with placing a Medical Device on a Medical IT Network
A Process Assessment Model for Assessing the Risk Associated with placing a Medical Device on a Medical IT Network Silvana Togneri MacMahon, Fergal Mc Caffery, Frank Keenan Regulated Software Research
More informationENGINEERING DRAWINGS MANAGEMENT POLICY (IFC/AS BUILTS)
Approval Amendment Record Approval Date Version Description 15/10/2015 1 This policy takes precedence over L1-NAM-PRO-003 Infrastructure As Built Drawing Management due to business restructures. New Content
More informationRulemaking Hearing Rules of the Tennessee Department of Health Bureau of Health Licensure and Regulation Division of Emergency Medical Services
Rulemaking Hearing Rules of the Tennessee Department of Health Bureau of Health Licensure and Regulation Division of Emergency Medical Services Chapter 1200-12-01 General Rules Amendments of Rules Subparagraph
More informationThe Port Marine Safety Code a Harbour Masters Perspective!
The Port Marine Safety Code a Harbour Masters Perspective! A PRESENTATION FOR THE PIANC PORT OPERATIONS SEMINAR, LONDON, 25 TH NOVEMBER 2016 CAPTAIN KEVIN RICHARDSON PRESIDENT INTERNATIONAL HARBOUR MASTERS
More informationUse of the Bowtie Methodology in the Generic Pre-Construction Safety Report (GDA PCSR) for Advanced Water Cooled NPPs
Use of the Bowtie Methodology in the Generic Pre-Construction Safety Report (GDA PCSR) for Advanced Water Cooled NPPs Fidel Ilizástigui Pérez National Nuclear Safety Centre Cuba UK ONR: Licensable organization
More informationSUCCESSFULLY IMPLEMENTING TRANSFORMATIONAL TECHNOLOGY IN HOSPITALS AND HEALTH SYSTEMS
SUCCESSFULLY IMPLEMENTING TRANSFORMATIONAL TECHNOLOGY IN HOSPITALS AND HEALTH SYSTEMS Glenn E. Pearson, FACHE Principal, Pearson Health Tech Insights, LLC Georgia HFMA/Georgia HIMSS August 2, 2017 Outline
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16278 First edition 2016-03-01 Health informatics Categorial structure for terminological systems of human anatomy Informatique de santé Structure catégorielle des systèmes terminologiques
More informationEMESRT. a Safety by Design initiative operated by the global mining industry. Vehicle Interaction
EMESRT a Safety by Design initiative operated by the global mining industry Vehicle Interaction EMESRT Purpose Accelerate development and adoption of leading practice designs to minimise the risk to Health
More informationprogressive assurance using Evidence-based Development
progressive assurance using Evidence-based Development JeremyDick@integratebiz Summer Software Symposium 2008 University of Minnisota Assuring Confidence in Predictable Quality of Complex Medical Devices
More informationThe Privacy Case. Matching Privacy-Protection Goals to Human and Organizational Privacy Concerns. Tudor B. Ionescu, Gerhard Engelbrecht SIEMENS AG
The Privacy Case Matching Privacy-Protection Goals to Human and Organizational Privacy Concerns Tudor B. Ionescu, Gerhard Engelbrecht SIEMENS AG Agenda Introduction Defining the privacy case Privacy-relevant
More informationComprehensive Emergency Management Plan
Comprehensive Emergency Management Plan Section 6-Communications Annex Blank Intentionally 2 CEMP Annex 6 5 Communications Annex I. PURPOSE II. POLICY The purpose of this annex is to describe the communications
More informationArticle 117 A Notified Body perspective, advice on how and when to engage notified bodies
TOPRA Annual Medical Devices Symposium 2017 Article 117 A Notified Body perspective, advice on how and when to engage notified bodies Theresa Jeary, Head of Notified Body Medical Devices, LRQA ENABLING
More informationTGA Discussion Paper 3D Printing Technology in the Medical Device Field Australian Regulatory Considerations
TGA Discussion Paper 3D Printing Technology in the Medical Device Field Australian Regulatory Considerations MTAA Response - October 2017 October 2017 Australian Regulatory Considerations Page 1 of 7 Level
More informatione-care Living Lab - 5 avenue du Grand Sablon La Tronche - FRANCE Tel: +33 (0)
e-care Living Lab e-care Living Lab in Rhône-Alpes Region e-care got the Living Lab label in 2010 from ENoLL e-care Living Lab objectives (1/2) To promote the Living Lab approach in the healthcare sector
More informationThis document is a preview generated by EVS
TECHNICAL REPORT IEC/TR 80002-1 Edition 1.0 2009-09 colour inside Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software IEC/TR 80002-1:2009(E) THIS PUBLICATION
More informationElectronic article surveillance systems
Level: 2 Credit value: 17 Unit aims To provide a broad knowledge and understanding for surveyors and designers, Installation technicians, commissioning technicians and maintenance technicians for Electronic
More informationIntroduction to Medical EMC
Introduction to Medical EMC Darryl P. Ray Principal Consultant Darryl Ray EMC Consulting, LLC darryl.ray@dray-emc.com 925-487-0072 www.dray-emc.com 1 Scope This presentation focuses on: Medical Electrical
More information(Non-legislative acts) DECISIONS
4.12.2010 Official Journal of the European Union L 319/1 II (Non-legislative acts) DECISIONS COMMISSION DECISION of 9 November 2010 on modules for the procedures for assessment of conformity, suitability
More informationImplementing Quality Systems
Implementing Quality Systems CGMP By The Sea August 29, 2006 Chris Joneckis, Ph.D. Senior Advisor For CMC Issues Center For Biologics Evaluation And Research Add FDA Bar and Presentation Overview Driving
More informationHuman Factors Points to Consider for IDE Devices
U.S. FOOD AND DRUG ADMINISTRATION CENTER FOR DEVICES AND RADIOLOGICAL HEALTH Office of Health and Industry Programs Division of Device User Programs and Systems Analysis 1350 Piccard Drive, HFZ-230 Rockville,
More informationBiomedical Equipment Technician
Biomedical Equipment Technician Occupational Skill Stards Texas Skill Stards Board Recognized Critical Work Function 1. Install Biomedical Equipment 1.1 Receive, inspect inventory upon delivery 1.2 Deliver
More informationSafety Standards and Collaborative Robots. Pat Davison Robotic Industries Association
Safety Standards and Collaborative Robots Pat Davison Robotic Industries Association Topics What is it? How did we get here? What has already been done? What still needs doing? Standards ISO 10218-1:2006
More informationThe UK Generic Design Assessment
The UK Generic Design Assessment Dr Diego Lisbona Deputy Delivery Lead Advanced Modular Reactors Nuclear Safety Inspector New Reactors Division Infrastructure Development Working Group (IDWG) workshop,
More informationNZ China EEEMRA. Topics:
NZ China EEEMRA Topics: Mutual Recognition Agreements (MRAs) China Compulsory Certification (CCC) system EEEMRA Advantages of the EEEMRA Beyond the EEEMRA Peter Morfee Principal Technical Advisor EnergySafety
More informationPart 2: Medical device software. Validation of software for medical device quality systems
Provläsningsexemplar / Preview TECHNICAL REPORT ISO/TR 80002-2 First edition 2017-06 Medical device software Part 2: Validation of software for medical device quality systems Logiciels de dispositifs médicaux
More informationVAR Generator Operation for Maintaining Network Voltage Schedules
A. Introduction 1. Title: Generator Operation for Maintaining Network Voltage Schedules 2. Number: VAR-002-3 3. Purpose: To ensure generators provide reactive support and voltage control, within generating
More informationWRHA Supply Chain New Technology Workshop Supply Chain Forum November 17, 2010
WRHA Supply Chain New Technology Workshop Supply Chain Forum November 17, 2010 Prepared & Presented by: Gwen Connon, Contract Specialist, WRHA Contracting Services Sarah Kelso, Manager, Clinical Engineering,
More informationAPMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010
APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010 The CIPM global mutual recognition arrangement (global MRA) requires national metrology institutes (NMIs) to have in place
More informationSAFETY CASE PATTERNS REUSING SUCCESSFUL ARGUMENTS. Tim Kelly, John McDermid
SAFETY CASE PATTERNS REUSING SUCCESSFUL ARGUMENTS Tim Kelly, John McDermid Rolls-Royce Systems and Software Engineering University Technology Centre Department of Computer Science University of York Heslington
More informationJustin McCarthy John Amoore, Paul Blackett, Fran Hegarty, Richard Scott. Regulations, Guidance and Standards
Justin McCarthy John Amoore, Paul Blackett, Fran Hegarty, Richard Scott Regulations, Guidance and Standards 1 What s it all about? Clarity regarding the difference between: Regulations Guidance Standards
More informationApplied Safety Science and Engineering Techniques (ASSET TM )
Applied Safety Science and Engineering Techniques (ASSET TM ) The Evolution of Hazard Based Safety Engineering into the Framework of a Safety Management Process Applied Safety Science and Engineering Techniques
More informationThis is a preview - click here to buy the full publication
IEC/TR 80002-1 TECHNICAL REPORT Edition 1.0 2009-09 colour inside Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationApproved 09 December 2011
ECC Decision (11)04 Exemption from individual licensing of digital terminals of narrowband and wideband PMR/PAMR/PPDR systems and free circulation and use of digital terminals of narrowband and wideband
More informationPhase 2 Executive Summary: Pre-Project Review of AECL s Advanced CANDU Reactor ACR
August 31, 2009 Phase 2 Executive Summary: Pre-Project Review of AECL s Advanced CANDU Reactor ACR-1000-1 Executive Summary A vendor pre-project design review of a new nuclear power plant provides an opportunity
More informationDesigner to End User The IECEx Verification Dossier. Roger D Jones National Oilwell Varco (NOV)
Designer to End User The IECEx Verification Dossier Roger D Jones National Oilwell Varco (NOV) Disclaimer The views and opinions expressed in the following presentation are those of the individual presenter
More informationKeeping Your House in order?
Keeping Your House in order? A view on Safety Reviews from UK Offshore experience Ian Wright Business Development Director, Upstream DNV Energy, Europe & North Africa March 2009 Introduction Safety Performance
More informationRecast de la législation européenne et impact sur l organisation hospitalière
Recast de la législation européenne et impact sur l organisation hospitalière MEDICAL DEVICES IN BELGIUM. What s up? Brussels44Center 24.10.2017 Valérie Nys Need for changes? Regulatory system is highly
More information1 What is Standardization? 2 What is a standard? 3 The Spanish Association for Standardization, UNE
1 What is Standardization? 2 What is a standard? 3 The Spanish Association for Standardization, UNE 3 4 UNE and European and international standardization 5 How are standards prepared? 6 Why participate?
More informationVAR Generator Operation for Maintaining Network Voltage Schedules
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
More informationEMC & Radio requirements within EU
EMC & Radio requirements within EU Roy Uggerud 2018/10/17 1 New directives EMC 2014/30/EU (replace EMC directive Implemented 20.04.2016 RED 2014/53/EU (replace R&TTE directive 1999/5/EC) Implemented 13.June
More informationSAFETY CASE ON A PAGE
SAFETY CASE ON A PAGE Dr Sally A. Forbes, Nuclear Safety Department, AWE, Aldermaston, Reading, Berkshire RG7 4PR, UK Keywords: Safety Case, SHAPED, Hazard Awareness Introduction Safety Case on a Page
More informationTYPE APPROVAL PROCEDURE
Approval Amendment Record Approval Date Version Description 15/06/2012 1 Initial issue under MTM. Replaces Connex documents cml- 8.13-PR-002 & cml-8.21-po-168 30/11/2012 2 Document revised and updated
More informationDeepwater Oil Exploration Drilling Safety: The Cuban Regulatory Approach Panel discussion: One Gulf - Drilling Offshore Cuba
Deepwater Oil Exploration Drilling Safety: The Cuban Regulatory Approach Panel discussion: One Gulf - Drilling Offshore Cuba Fidel Ilizastigui Perez Process Safety/Risk Management Specialist Office of
More informationVAR Voltage and Reactive Control
VAR-001-4 Voltage and Reactive Control A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-4 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are
More informationVAR Generator Operation for Maintaining Network Voltage Schedules
A. Introduction 1. Title: Generator Operation for Maintaining Network Voltage Schedules 2. Number: VAR-002-4 3. Purpose: To ensure generators provide reactive support and voltage control, within generating
More informationA. Introduction. VAR Voltage and Reactive Control
A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-4.2 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are monitored, controlled, and maintained
More informationVAR Voltage and Reactive Control. A. Introduction
VAR-001-5 Voltage and Reactive Control A. Introduction 1. Title: Voltage and Reactive Control 2. Number: VAR-001-5 3. Purpose: To ensure that voltage levels, reactive flows, and reactive resources are
More informationLeadership, Safety Culture and Catastrophe: Lessons from 10 Case Studies from 7 Safety Critical Industries
Leadership, Safety Culture and Catastrophe: Lessons from 10 Case Studies from 7 Safety Critical Industries ASPECT 2012-11 th September 2012 Xavier Quayzin 1 Invensys 2012 INTRODUCTION Catastrophic accidents
More informationCertification of EXPLOSION PROTECTED ELECTRICAL EQUIPMENT
Certificate of Conformity Certificate No: ANZEx 11.2009 Issue: 0 16 December 2011 Original Issue Applicant: Pepperl+Fuchs GmbH Lilienthalstrasse 200 68307 Mannheim GERMANY Electrical Equipment: Isolation
More informationDNVGL-CP-0338 Edition October 2015
CLASS PROGRAMME DNVGL-CP-0338 Edition October 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD DNV GL class
More informationKinyun Australia KP : Procedure for Control of Engineering Drawings PROCEDURE FOR CONTROL OF ENGINEERING DRAWINGS
PROCEDURE FOR CONTROL OF ENGINEERING DRAWINGS 1 General Kinyun has established, documented, implemented and maintains this Quality Procedure for the control of engineering drawings. This procedure defines
More informationVAR Generator Operation for Maintaining Network Voltage Schedules
A. Introduction 1. Title: Generator Operation for Maintaining Network Voltage Schedules 2. Number: VAR-002-3 3. Purpose: To ensure generators provide reactive support and voltage control, within generating
More informationIndustrial, Scientific and Medical (ISM) Radio Frequency Generators
Issue 4 June 2006 Spectrum Management and Telecommunications Interference-Causing Equipment Standard Industrial, Scientific and Medical (ISM) Radio Frequency Generators Aussi disponible en français - NMB-001
More informationProf. Steven S. Saliterman. Department of Biomedical Engineering, University of Minnesota
Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ ISO 14971 Risk Management as Part of Design Control Human Factors and Usability Engineering Definitions How People
More informationMedical Devices cyber risks and threats
Medical Devices cyber risks and threats David Grainger Senior Medical Device Specialist MHRA The challenges of software medical device regulation. david.grainger@mhra.gov.uk Current framework 1998 In Vitro
More informationSAFETY CASES: ARGUING THE SAFETY OF AUTONOMOUS SYSTEMS SIMON BURTON DAGSTUHL,
SAFETY CASES: ARGUING THE SAFETY OF AUTONOMOUS SYSTEMS SIMON BURTON DAGSTUHL, 17.02.2017 The need for safety cases Interaction and Security is becoming more than what happens when things break functional
More informationthe SPD company Dr Clive Simon, Principal, The SPD Company.
the SPD company With decades of local and international experience at the coalface, The SPD Company s specialists have built a solid repertoire of in-depth technical knowledge within the highly-regulated
More informationGeneral Safety/EMC and Electrical Information for i-limb ultra and i-limb digits
1. General Safety 1.1 The i-limb ultra and i-limb digits devices are electrical devices, which under certain circumstances could present an electrical shock hazard to the user. Please read the accompanying
More informationAssessment of Certification Activities for Cross Frontier Accreditation
IAF MD 12:2013 IAF Mandatory Document International Accreditation Forum, Inc. Assessment of Certification Activities for Cross Frontier Accreditation IAF MD 12: 2013 IAF MD 12:2013 International Accreditation
More informationOverview and Version 3.1.0
Overview and Version 3.1.0 The sponsor and the investigator shall keep a clinical trial master file. The clinical trial master file shall at all times contain the essential documents relating to that clinical
More informationIOP Nuclear Industry Group
IOP Nuclear Industry Group Housekeeping No fire alarms are planned tonight so if the alarm sounds please exit the building quickly via the nearest fire exit. i.e Exit the Mulberry suite and take your first
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 2394 Fourth edition 2015-03-01 General principles on reliability for structures Principes généraux de la fiabilité des constructions Reference number ISO 2015 COPYRIGHT PROTECTED
More informationANSI/ RIA R15.06 (Robot Safety Standard) Update. Acknowledgements
ANSI/ RIA R15.06 (Robot Safety Standard) Update Roberta Nelson Shea Global Marketing Manager, Safety Components Rockwell Automation October 14 th 16 th, 2013 ~ Indianapolis, Indiana USA Acknowledgements
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16971 First edition 2015-04-15 Ophthalmic instruments Optical coherence tomograph for the posterior segment of the human eye Instruments ophtalmiques Tomographe à cohérence optique
More informationA/AC.105/C.1/2006/NPS/CRP.7 16 February 2006
FOR PARTICIPANTS ONLY A/AC.105/C.1/2006/NPS/CRP.7 16 February 2006 Original: English COMMITTEE ON THE PEACEFUL USES OF OUTER SPACE Scientific and Technical Subcommittee Forty-third session Vienna, 20 February
More informationTowards a multi-view point safety contract Alejandra Ruiz 1, Tim Kelly 2, Huascar Espinoza 1
Author manuscript, published in "SAFECOMP 2013 - Workshop SASSUR (Next Generation of System Assurance Approaches for Safety-Critical Systems) of the 32nd International Conference on Computer Safety, Reliability
More informationTIME - TABLE Subject & Time: am to pm Sem.- I SEM: - I (NEW) MPC-101 : Modern Pharmaceutical Analytical Techniques
M. PHARM (New) ( w.e.f. July, 2017-2018) Examination May, 2018 NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No. 163 of 2018 Programme of the Master of Pharmacy (NEW) Examination May, 2018 1. Candidates
More informationSECTION SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES
SECTION 01 33 23 - SHOP DRAWINGS, PRODUCT DATA, AND PART 1 - GENERAL 1.1 SUMMARY A. Products include, but are not limited to, the following construction submittals: 1. Shop Drawings. 2. Product Data. 3.
More informationSoftware in Safety Critical Systems: Achievement and Prediction John McDermid, Tim Kelly, University of York, UK
Software in Safety Critical Systems: Achievement and Prediction John McDermid, Tim Kelly, University of York, UK 1 Introduction Software is the primary determinant of function in many modern engineered
More information1 SERVICE DESCRIPTION
DNV GL management system ICP Product Certification ICP 4-6-3-5-CR Document number: ICP 4-6-3-5-CR Valid for: All in DNV GL Revision: 2 Date: 2017-05-05 Resp. unit/author: Torgny Segerstedt Reviewed by:
More informationMEDITECH C/S 5.6 Update Tips and Tricks
May 6, 2011 Peter Miessner Senior Consultant First Steps Resources Upgrade Process ARRA Top Off Go Live Acknowledgements Questions 5/6/2011 Meditech C/S 5.6 Update 2 First Steps Review User Access and
More informationPRIMATECH WHITE PAPER COMPARISON OF FIRST AND SECOND EDITIONS OF HAZOP APPLICATION GUIDE, IEC 61882: A PROCESS SAFETY PERSPECTIVE
PRIMATECH WHITE PAPER COMPARISON OF FIRST AND SECOND EDITIONS OF HAZOP APPLICATION GUIDE, IEC 61882: A PROCESS SAFETY PERSPECTIVE Summary Modifications made to IEC 61882 in the second edition have been
More informationGraphical symbols Public information symbols
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7001 Third edition 2007-11-01 AMENDMENT 1 2013-06-01 Graphical symbols Public information symbols AMENDMENT 1 Symboles graphiques Symboles destinés
More informationETSI workshop on Reconfigurable Radio Systems. Tomaž Šolc
ETSI workshop on Reconfigurable Radio Systems Tomaž Šolc tomaz.solc@ijs.si What is ETSI? European Telecommunications Standards Institute Headquarters in Sophia Antipolis, France Workshop overview To report
More information