Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia

Transcription

1 CURRICULUM VITAE PERSONAL BIODATA Name HABIBOLLAH BIN HARON, Prof. Dr Date of Birth 27 December 1966 Sex Office Address Contact No. Web Site Male Department of Computer Science, Faculty of Computing, Universiti Teknologi Malaysia UTM Skudai, Johor, Malaysia (Office); (Fax) habib@utm.my habib_utm@yahoo.com QUALIFICATIONS Doctor of Philosophy, 2004 Computer Science Area: Computer Aided Geometric Design (CAGD), Universiti Teknologi Malaysia, January 2000 March 2004 Master of Science, 1995 Computer Technology in Manufacture, Joint Program: University of Sussex & University of Brighton, United Kingdom October 1994 September 1995 Bachelor of Computer Science, 1989 Universiti Teknologi Malaysia, July 1987 June 1989 Diploma in Computer Science, 1987 Universiti Teknologi Malaysia, July 1984 June 1987 WORKING EXPERIENCES Professor Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia 3 Oct 2012 Present Associate Professor Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia February Oct Associate Professor Department of Computer Science, College of Computer & Information Sciences, Imam Mohammed Ibn Saud Islamic University, Riyadh, Kingdom of Saudi Arabia 21 Sept 2009 January 2011 Associate Professor Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia 11 August Sept 2009 Senior Lecturer Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia 27 December August 2008 Lecturer Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia 14 November December 2005 Assistant Lecturer Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknologi Malaysia Appointed: 28 December 1991; Confirmed: 13 November 1995

2 28 December November 1995 Supervisor Quality Control Section, Matsushita Foundry Industrial, Tanjung Keling Industrial Estate, Melaka, Malaysia 1 October November 1991 Analyst Programmer Computer System Advisers (M) Sdn Bhd, Petaling Jaya, Malaysia 18 September September 1991 APPOINTMENTS Person-In-Charge Representative of FSKSM in the implementation of Board of Computing Malaysia. Person-In-Charge Memorandum of Understanding between BCSynergy and Universiti Teknologi Malaysia MoU signed on 26 April 2012 Organizing Chair 5 th Asian Conference on Intelligent Information and Database Systems Conference Date: March 2013 Coordinator Program: MSc of Computer Science (Mixed Mode and Taught Course) Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia August 2011 till 31 Oct Head Department of computer Science, Faculty of Computing (previously Faculty of Computer Science and Information System) March 2011 till present Head Department of Modeling and Industrial Computing, Faculty of Computer Science & Information Systems, Universiti Teknolgi Malaysia October 2004 till August 2009 Editorial Board International Arab Journal of e-technology, 1 June 2008 till present International Arab Journal on Information Technology (IAJIT), Feb 2010 till present Chairman, Advisory Panel of Program Diploma in Information Technology, Kolej Negeri, Nilai, Negeri Sembilan, 1 May 06 till 30 April 09 Track Chair, Track Visualization and Computer Games The Second Asia International Conference on Modelling & Simulation (Asia Modelling Symposium 2008), May 2008, 1 September 07 till 31 May 2008 Members, Group Task Force Peer Review of Teaching, Centre of Teaching and Learning (CTL), Universiti Teknologi Malaysia, 27 April 2007 till 27 March 2008 Deputy Head, Research & Development, Cluster Electronics, Communications, Informations, and Technology for Society Universiti Teknologi Malaysia, 1 February 07 till 31 January 09 Head, Research & Development: Sub-Area Modeling and Simulation, Cluster Electronics, Communications, Informations, and Technology for Society, Universiti Teknologi Malaysia, 1 February 07 till 31 Jan 09 Technical Committee, International Arab Journal on Information Technology (IAJIT), 1 June 2006 till Jan 2010 AWARDS/RECOGNITIONS Finalist, Article in Indexed Journal for year 2010, UTM Citra Karisma 2011(UTM Excellence Award and Recognition Ceremony 2011), 7 July Keynote Speaker, Week of Science, Technology and Innovation, organized by YPJ Educational Group, New York Hotel, Johor Bahru; 12 May Most Active Reviewers of International Arab Journal of Information Technology (IAJIT) During the Year 2007, 2008, 2009, 2010 and 2011, 2012 Excellence Service Award (Anugerah Perkhidmatan Cemerlang), Universiti Teknologi Malaysia 2007

3 Best Paper for Fifth International Conferences on Information Technology in Asia 2007 (CITA), Kuching, Malaysia, July 2007 Excellence Service Award (Anugerah Perkhidmatan Cemerlang), Universiti Teknologi Malaysia 2003 ODA Shared Scholarship Scheme for one year M. Sc. course at the University of Sussex, UK by Association of Commonwealth Universities, October September 1995 IDB Training Scheme Award under Development and Industrial Technology Program/Asian Development Bank (PPTP/ADB); 1 May - 31 July 1994 (3 months) at Dept. of Electronic Engineering, University of Hull, UK. Panel Judges, 1. Competition on Innovation dan Design, Johor Higher Education Institute in conjuction with Week of Science, Technology and Innovation, YPJ Educational Group, 12 May TSS 2 nd Malaysia Engineering Design Challenge 2007 (Matlab & Simulink), 18 August 2006 till 29 June 2007 Research Grant Evaluator 1. Reviewer of Grant Research Proposal, Innovation Research Centre, King Abdulaziz City for Science and Technology (KACST), A Decision-Support System for Recycling Expiring Products and Management of Reverse Logistics in the Supply Chain of Dairy Products completed 14 March Rieviewer Board for NAFOSTED (the National Foundation of Science and Technology Development of Vietnam) Development of multimodal localization methods in indoor perspective environments completed 29 June 2013 MEMBERSHIP Senior Members, IEEE Member, Information Visualization Society, United Kingdom Member, Persatuan Sains Matematik Malaysia (Malaysian Society of Sciences and Mathematics) (PERSAMA) Publication: Books 1. Selamat, Ali; Nguyen, Ngoc Thanh; Haron, Habibollah (Eds.), Intelligent Information and Database Systems, 5th Asian Conference, ACIIDS 2013, Kuala Lumpur, Malaysia, March 18-20, 2013, Proceedings, Part I, Series: Lecture Notes in Computer Science, Vol 7802, Subseries: Lecture Notes in Artificial Intelligence, 2013, XVIII, 530 p. ISBN Selamat, Ali; Nguyen, Ngoc Thanh; Haron, Habibollah (Eds.), Intelligent Information and Database Systems, 5th Asian Conference, ACIIDS 2013, Kuala Lumpur, Malaysia, March 18-20, 2013, Proceedings, Part II, Series: Lecture Notes in Computer Science, Vol. 7803, Subseries: Lecture Notes in Artificial Intelligence, 2013, XVIII, 556 p, ISBN Habibollah Haron, and Adzhar Kamaludin (2000), J.S. Milton, Jesse C. Arnold, Pengenalan Kebarangkalian dan Statistik: Prinsip dan Aplikasi bagi Kejuruteraan dan Sains Komputer Edisi Kedua (Translation of Probability and Statistics: Principle and Application for Engineering and Computer Science 2 nd Edition), Penerbit UTM Press, 2000, ISBN Adzhar Kamaludin, and Habibollah Haron (1998), Peggy Tang Strait, Kursus Asas Kebarangkalian dan Statistik Dengan Aplikasi Edisi Kedua (Translation of Basic Course for Probability and Statictics with Application 2 nd Edition), Penerbit UTM Press, 1998 ISBN Faridah Maarof, Mohd Yunus Majid and Habibollah Haron (1991), Robin J. Wilson, Pengenalan Teori Graf Edisi Ketiga (Translation of Introduction to Graph Theory 3 rd Edition), Penerbit UTM Press, 1991, ISBN Publication: Research Monograph 1. Haron, Habibollah (2006), Development of Computer Aided Three-Dimensional Geometric Modeler based on Designer s Idea in Two-Dimensional, Penerbit UTM Press 2006, ISBN Haron, Habibollah and Ishak, Hasrul Haidar and Sukimin, Zuraini (2008), The Development Of Virtual Product Life Cycle Design Tool Using Artificial Intelligence Technique, Penerbit UTM Press Mohd Zain, Azlan and Talib, Mohamad Shukor and Haron, Habibollah and Matondang, Muhammad Zaini and Mardzuki, Samihah (2008), Development Of Intelligent 3D Solid Modeler Based On Artificial Intelligent Technique, Penerbit UTM Press Haron, Habibollah (2009), Mapping and Visualization Algorithm of Vertex Chain Code from Thinned Binary Image, Penerbit UTM Press 2009

4 Publication Abdul Syukor Mohamad Jaya, Siti Zaiton Mohd Hashim, Habibollah Haron, Muhd. Razali Muhamad, Md. Nizam Abd. Rahman (2013), Predictive Modeling of TiN Coatings Grain Size Using RSM, Australian Journal of Basic and Applied Sciences, 7(6): , 2013, ISSN Abdul Syukor Mohamad Jaya, Siti Zaiton Mohd Hashim, Habibollah Haron, Muhd. Razali Muhamad, Abd Samad Hasan Basari, Md. Nizam Abd. Rahman (2013), Modeling of TiN Coating Thickness Using RSM Approach, The International Conference on Advanced Material Engineering & Technology (ICAMET) 2013, Bandung, Indonesia, Nov Muhammad 'Arif Mohamad, Nor Azizah Ali, Roselina Sallehuddin, Habibollah Haron (2013), Prediction of Hardness in TiA1N Coating Process using Support Vector Machine, The 8th IASTED International Conference on Advances in Computer Science (ACS 2013) April, Phuket, Thailand. DOI /P , Abdul Syukor Mohamad Jaya, Siti Zaiton Mohd Hashim, Habibollah Haron, Md. Nizam Abd. Rahman and Muhd. Razali Muhamad (2013), Modeling of ANFIS in predicting TiaN coatings roughness, The 5th International Conference on Computer Science and Information Technology (CSIT), March 27-28, Amman, Jordan, Abdul Syukor Mohamad Jaya, Siti Zaiton Mohd Hashim, Habibollah Haron, Muhd. Razali Muhamad, Md. Nizam Abd. Rahman and Abd Samad Hasan Basari (2013). Predictive Modeling of TiN Coating Roughness. Advanced Materials Research, 626: Publisher: Trans Tech Publication. 6. Muhammad 'Arif Mohamad, Nor Azizah Ali, Habibollah Haron (2013), (2013 Computational Based Approach for Predicting Hardness Performances of TiA1N Coating Using Artificial Neural Network, Australian Journal of Basic and Applied Sciences, 7(6): , ISSN M. R. H. Mohd Adnan*,a, Azlan Mohd Zainb, Habibollah Haron (2013), Prediction of Surface Roughness in the End Milling Machining using Fuzzy Rule-Based, Applied Mechanics and Material, Vol. 421, , Trans Tech Publications Publication: International Journal Azlan Mohd Zain, Habibollah Haron, Sultan Noman Qasem, and Safian Sharif (2012), Regression and ANN models for Estimating Minimum Value of Machining Performance, Journal of Applied Mathematical Modeling, Elsevier, IF 1.371, 36(4), pp , ISSN X. 2. Habibollah Haron, A. Rehman, D. I. S. Adi, S. P. Lim and T. Saba, Parameterization Method on B-Spline Curve, Journal of Mathematical Problems in Engineering, Hindawi Publishing Corporation, Vol 2012, 22 pages, doi: /2012/640472, IF ISBN Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2011), Integrated ANN-GA for Estimating the Minimum Value for Machining Performance, International Journal of Production Research on Applications of Computational Intelligence for Design and Operations Decisions in Manufacturing", Publisher: Taylor and Francis, Vol. 50, No. 1 January 2012, pp , ISSN: , IF Lim Seng Poh and Habibollah Haron (2012), Surface Reconstruction Techniques: A Review, Artificial Intelligence Review, Publisher Elsevier (online 4 March 2012), ISSN , DOI: /s z, IF Hossein Rajabalipour Cheshmehgaz, Habibollah Haron, Farahnaz Kazemipour and Mohamad Ishak Desa (2012), Accumulated Risk of Body Postures in Assembly Line Balancing Problem and Modeling through a Multi-Criteria Fuzzy-Genetic Algorithm, Computers and Industrial Engineering, Publisher: Elsevier, Vol. 63, pp , IF 1.589, ISSN: M. R. H. Mohd Adnan, Azlan Mohd Zain, and Habibollah Haron (2012), Fuzzy Logic for Modeling Machining Process: A Review, Artificial Intelligence Review, Publisher Elsevier (accepted 16 Dec 2012), ISSN , IF doi /s Hossein Rajabalipour Cheshmehgaz, Habibollah Haron Abdollah Sharifi (2012), The review of Multiple Evolutionary Searches and Multi-Objective Evolutionary Algorithms, Artificial Intelligence Review, Publisher Elsevier (online published 1 Jan. 2013), doi /s , ISSN , IF Lim Seng Poh and Habibollah Haron (2012), Cube Kohonen Self Organising Map (CKSOM) Model with New Equations in Organising Unstructured Data, IEEE Transactions on Neural Networks and Learning Systems, ISSN X, 29(9), , IF 3.766

5 Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2011), Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA, Expert Systems with Applications: An International Journal, Publisher: Elsevier,Vol 38 (2011), pp ISSN: , IF Dewi Nasien, Habibollah Haron, Siti Sophiayati Yuhaniz (2011). The Heuristic Extraction Algorithms for Freeman Chain Code of Handwritten Character, International Journal of Experimental Algorithms (IJEA), Publisher: CSC Press, Computer Science Journals, Volume (1): Issue (1); pp. 1-20, ISSN Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2011), Integration of Simulated Annealing and Genetic Algorithm to estimate optimal solutions for minimizing surface roughness in end milling Ti-6AL-4V, International Journal of Computer Integrated Manufacturing, Publisher: Taylor and Francis, Vol. 24, No 6, June 2011, pp , ISSN: , IF Habibollah Haron, Amjad Rehman, L.A. Wulandhari and Tanzila Saba (2011), Improved Vertex Chain Code Based Mapping Algorithm for Curve Length Estimation, Journal of Computer Science, Publisher: Science Publications, Vol. 7(5), pp , ISSN Hossein Rajabalipour Cheshmehgaz, and Habibollah Haron (2011), A Novel Job Rotation Schedule Model for Repetitive Jobs Regarding Posture Variety during Work Hours and Solving with a Genetic Algorithm, Journal of Computing, Vol. 3 (5), pp , ISSN: , IF Suriati Bte Sadimon, Mohd Shahrizal Sunar, and Habibollah Haron (2011), A review of Facial Caricature Generator, Journal of Computing, Vol. 3 (5), pp , ISSN , IF Dewi Nasien, Habibollah Haron, Haswadi Hasan, Siti S. Yuhaniz (2010), Chain Code Extraction of Handwritten Recognition using Particle Swarm Optimization, Journal of Intelligent Computing, DLine Journals portal, Volume: 1, Issue: 4, pp , ISSN: Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2011), Genetic Algorithm and Simulated Annealing to Estimate Optimal Process Parameters of the Abrasive Waterjet Machining, Engineering with Computers: An International Journal for Simulation-Based Engineering, Publisher: Springerlink, Volume 27, Issue 3 (2011), Page , ISSN: , IF Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2011), Optimization of Process Parameters in the Abrasive Waterjet Machining using Integrated SA-GA, International Journal on Applied Soft Computing, Elsevier, Vol. 11, pp IF M.Z. Matondang, A.A. Samah H. Haron and H.A. Majid (2011), Graph Colouring Algorithm for Validating Labelled 2D Line Drawing Objects, International Journal of Computer Science Issues, IJCSI.org, Vol. 8, Issue 5, No 2, Sept. 2011, pp. 1-7, ISSN: , IF Abdul Syukor Mohamad Jaya, Abd Samad Hasan Basari, Siti Zaiton Mohd Hashim, Habibollah Haron, Muhd. Razali Muhamad and Md. Nizam Abd. Rahman (2011), Application of ANFIS in Predicting of TiAlN Coatings Hardness, Australian Journal of Basic and Applied Sciences, 5(9): , ISI Journal: SJR 0.027, ISSN Haswadi Hasan, Habibollah Haron, and Siti Zaiton Mohd Hashim (2011), The Framework of Image Recognition based on Modified Freeman Chain Code, Journal of Image Processing, CSC Press, Computer Science Journals, Vol. 5, Issue 5, ISSN , pp Haswadi Hasan, Habibollah Haron, and Siti Zaiton Mohd Hashim (2011), Heuristic Algorithm to Generate Modified Freeman Chain Code from Thinned Binary Image, Australian Journal of Basic and Applied Sciences, ISI Journal: SJR 0.027, 5(11), pp , ISSN Azurah Abu Samah,M. Z. Matondang, Habibollah Haron, H.A. Majid, and N.K. Ibrahim (2011), Role Model of Graph Coloring Application in Labeled 2D Line Drawing Object, International Journal of Experimental Algorithms (IJEA), CSC Press, Computer Science Journals, Volume 2, Issue 3, pp , ISSN Hossein Rajabalipour Cheshmehgaz, Habibollah Haron, and M. R. Maybodi (2011), Cellularbased population to Enhance Genetic Algorithm for Assignment Problems, American Journals of Intelligent Systems, Scientific and Academic Publishing, 1(1) 32-36, ISSN Habibollah Haron, Shafry Rahim, Amjad Rehman, Tanzila Saba (2010), Curve Length Estimation using Vertex Chain Code, International Journal on Computer Science and Engineering (IJCSE), Publisher: Engg Journals Publications, Vol. 2, No. 6, Sept 2010, pp , ISSN: Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2010), Application of GA to observe optimal effect of the radial rake angle for minimizing surface roughness in end milling,

6 International Journal of Machining and Machinability of Materials, Vol. 8, Nos. 3/4. Publisher: Inderscience Enterprises Ltd., pp , ISSN: Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2010), Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process, Expert Systems with Applications: An International Journal, Publisher: Elsevier, Vol 37, Issue 6 (June 2010), pp , ISSN: , IF Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2010), Prediction of Surface Roughness in the end milling machining using Artificial Neural Network, Expert Systems with Applications: An International Journal, Publisher: Elsevier, Vol 37, Issue 2 (March 2010), pp , ISSN: , IF Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2010), Simulated Annealing to Estimate the Optimal Cutting Condition for Minimizing Surface Roughness in End Milling Ti-6Al-4V, Machining Science and Technology: An International Journal, Publisher: Taylor and Francis, Volume 14 Issue 1, pp , ISSN: , IF Muhammad Zaini Matondang, and Habibollah Haron (2010), Hybrid Computing Algorithm in Representing Solid Model, International Arab Journal of Information Technology (IAJIT): Publisher: Zarqa Private University, Jordan, Volume 7, No. 4, pp , ISSN: , IF Lili Ayu Wulandhari, and Habibolah Haron (2008), The Evolution and Trend of Chain Code Scheme, ICGST International Journal on Graphics, Vision and Image Processing (GVIP): Publisher: ICGST, Volume (8), Issue (III), October 2008, pp , ISSN Muhammad Zaini Matondang, and Habibollah Haron (2008), Deriving Hidden Junction in Solid Model Reconstruction Using Neural Network, ICGST International Journal on Artificial Intelligence and Machine Learning (AIML), Publisher: ICGST, Volume 8, Issue II, September 2008, pp. 1-9, ISSN Syarul Haniz Subri, Habibollah Haron, and Roselina Sallehuddin (2006), Neural Network Corner Detection of Vertex Chain Code, ICGST International Journal on Artificial Intelligence and Machine Learning (AIML), Publisher: ICGST, January 2006, Vol (6) Issue (1), pp , ISSN Habibollah Haron, Siti Mariyam Shamsuddin, and Dzulkifli Mohamed (2005), Corner Detection of Chain-Coded Representation of Thinned Binary Image, International Journal of Computer Mathematics, U.K., Publisher: Taylor and Francis, Vol. 82 No. 8, August 2005, pp , ISSN: , IF Habibollah Haron, Dzulkifli Mohamad, and Siti Mariyam Shamsuddin (2003), Enhancement of Thinning Algorithm For 2D Line Drawing of 3D Objects, Journal of Mathematics & Computer Sciences (Computer Science Series), India, December 2003, pp Publication: National Journal 1. Awanis Romli, and Habibollah Haron (2007), Solid Modeler Evaluation and Comparison: Perspective of Computer Studies, Jurnal Teknologi, No. 47 (D Series), December 2007, Penerbit UTM Press, pp , ISSN Habibollah Haron, Siti Mariyam Shamsuddin, and Dzulkifli Mohamed (2004), Chain Code Algorihm in Deriving T-junction and Region of a Freehand Sketch, Jurnal Teknologi No. 40 (D Series), June 2004, Penerbit UTM Press, pp , ISSN Habibollah Haron, Dzulkifli Mohamad, and Siti Mariyam Shamsuddin (2003), Extraction of Junctions, Lines and Regions of Irregular Line Drawing: The Chain Code Processing Algorithm, Jurnal Teknologi, No. 38 (D Series), June 2003, Penerbit UTM Press, pp. 1-28, ISSN Habibollah Haron, and Dzulkifli Mohamad (2002), Penerbitan Maklumat Tiga Dimensi Sebuah Lukisan Garisan Menggunakan Kaedah Jumlah Kuasa Dua Terkecil (The derivation of Three Dimensional Information of A Line Frawing Using Total Least Square Method), Jurnal Teknologi No. 37 (D Series), December 2002, Penerbit UTM Press, pp , ISSN Habibollah Haron, and Dzulkifli Mohamad (2001), Pendekatan Pengoptimuman Dalam Penghasilan Objek Tiga Dimensi daripada Lukisan Garisan Dua Dimensi (Optimization Approach in Creating Three Dimensional Object from Two Dimensional Line Drawing), Jurnal Teknologi, No. 34 (C Series), June 2001, Penerbit UTM Press, pp , ISSN Publication: Book Chapters 1. Lim Seng Poh, Habibollah Haron (2013), Performance of Genetic Algorithm towards Benchmark Equations, ACIIDS 2013, Springer LNAI, to be presented 18 March 2013.

7 2. Lim Seng Poh and Habibollah Haron (2012), Applying Kohonen Network in Organising Unstructured Data for Talus Bone, Lecture Notes in Information Technology (LNIT)-ICTMF 2012, Information Engineering Research Institute, ISSN Vol Lili Ayu Wulandhari, Habibollah Haron, and Roselina Sellehuddin (2012), The Mapping Algorithm of Triangular Vertex Chain Code from Thinned Binary Image, V.V. Das, E. Ariwa, and S.B. Rahayu (Eds.): SPIT 2011, Springer LNICST, 62, pp , ISSN Sabarina Abu Bakar, SitiSophiayati Yuhaniz, HairudinAbd Majid, and Habibollah Haron, A New Framework in Solving Tailing and Necking Problems of Thinned Binary Image, V.V. Das, E. Ariwa, and S.B. Rahayu (Eds.): SPIT 2011, Springer LNICST, 62, pp , ISSN Muhammad Ikhwan Jambak, Habibollah Haron, Helmee Ibrahim and Norhazlan Abd Hamid (2010), Robotic Modeliling and Simulation: Theory and Application, Robot Manipulators Trends and Development, Edited by Prof Dr Agustin Jimenez and Dr Basil M Al Hadithi, Published by In-Tech, Croatia, pp , ISBN Hossein Rajabalipour Cheshmehgaz, Muhammad Ikhwan Jambak, and Habibollah Haron (2008), Soft Computing And Optimization, Soft Computing in Industrial Applicatioons, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp. 1-22, ISBN Akmal Rakhmadi, Mohd. Shafry Mohd. Rahim, and Habibolah Haron (2008), Image Segmentation Using Fuzzy C-Means Clustering, Soft Computing in Industrial Applicatioons, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp , ISBN Dewi Nasien and Habibollah Haron (2008), The Study Of Off-Line Character Recognition And Neural Network Recognition, Soft Computing in Industrial Applicatioons, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp , ISBN Hossein Rajabalipour Cheshmehgaz, Muhammad Ikhwan Jambak, and Habibollah Haron (2008), Assembly Line Balancing And Genetic Algorithms, Soft Computing in Industrial Applicatioons, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp , ISBN Azlan Mond Zain, Habibollah Haron, and Safian Sharif (2008), ANN In Modeling The Machining Process, Soft Computing in Industrial Applicatioons, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp , ISBN Azlan Mond Zain, Habibollah Haron, and Safian Sharif (2008), PSO For Optimum Cutting Parameters Of Surface Roughness In Machining, Soft Computing in Industrial Applications, Editors: Muhammad Ikhwan Jambak and Razana Alwee, Penerbit UTM Press, pp , ISBN Zuraini Sukimin and Habibollah Haron (2007), Geometric Reasoning Algorithm and Recognition of 3D Object Features, Advances in Image Processing and Pattern Recognition: Algorithms and Practice, Editors: Dzulkifli Mohamad and Nur Zuraifah Syazrah Othman, Penerbit UTM Press, pp , ISBN Lili Ayu Wulandhari and Habibollah Haron (2007), The Characteristics and Mapping Algorithm of Rectangular Vertex Chain Code, Advances in Image Processing and Pattern Recognition: Algorithms and Practice, Editors: Dzulkifli Mohamad and Nur Zuraifah Syazrah Othman, Penerbit UTM Press, pp , ISBN Oldooz Dianat and Habibollah Haron (2007), Review of Length Estimators in 2D, Advances in Image Processing and Pattern Recognition: Algorithms and Practice, Editors: Dzulkifli Mohamad and Nur Zuraifah Syazrah Othman, Penerbit UTM Press, pp , ISBN Invention Property (IP)/Copyright 1. Copyright: Rekabentuk, Visualisasi dan Simulasi Proses Automasi Pemotongan Otak-Otak Gulung (Designing, Visualization and Simulation of Automated Chopping Process for Otak-Otak) (2009 Universiti Teknologi Malaysia All Rights Reserved) 3 Sept Copyright: Aplikasi Rangkaian Neural Dalam Pengesanan Simpang Bagi Penterjemah Lakaran Pintar (Application of Neural Network in Corner Detection of Intelligent Sketch Interpreter) (2009 Universiti Teknologi Malaysia All Rights Reserved) 3 Sept Intellectual Property PI , Intelligent Neural Network 3D Solid Modeler, submitted August Approved February Publication: Proceedings of International Conference

8 M. R. H. Mohd Adnan, Azlan Mohd Zain, and Habibollah Haron (2012), Fuzzy Rule-Based for Predicting Machining Performance for SNTR Carbide in Milling Titanium Alloy (Ti-6Al- 4v), The th Conference on Data Mining and Optimization DMO2012, Langkawi, Sept., 85-89, ISBN: Mohd Faaizie Darmawan, Suhaila Mohd Yusuf, Habibollah Haron (2012), Review on Techniques in Determination of Age and Gender of Bone Using Forensic Antropology, Proceeding 4th International Conference on Computational Intelligence, Modelling & Simulation (CIMSim2012), Kuantan, Sept 2012, pp , ISBN Sarah Samson Soh, Nor Haizan Mohd Radzi, Habibollah Haron (2012), Review on Scheduling Techniques of Preventive Maintenance Activities of Railway, Proceeding 4th International Conference on Computational Intelligence, Modelling & Simulation (CIMSim2012), Kuantan, Sept 2012, pp , ISBN Muhammad 'Arif Mohamad, Nor Azizah Ali, Habibollah Haron (2012), Prediction of Hardness in Titanium Aluminium Nitride TiA1N Coating Process: A Review, Proceeding 4th International Conference on Computational Intelligence, Modelling & Simulation (CIMSim2012), Kuantan, Sept 2012, pp , ISBN A.S.M. Jaya, S.Z.M. Hashim, H. Haron, M.R. Muhamad, M.N.A. Rahman (2012). Fuzzy rule based model to estimate surface roughness and wear in hard coatings. Int. Conf. on Systems, Man, and Cybernetics. October 14-17, 2012, COEX, Seoul, Korea. IEEE: Dewi Nasien, Habibollah Haron, Haswadi Hasan, Siti S. Yuhaniz (2011), PSO Algorithms in Extracting Freeman Chain Code of Handwritten Isolated Character, Proceedings of International Conference on Information Technology and e-services, ICITeS'2011, April, Tunisia, pp , ISBN: Abdul Syukor Mohamad Jaya, S. Z. Mohd Hashim, M.R. Muhammad, M.M. Abd Rahman, H. Haron (2011), Hybrid RSM-fuzzy modeling for hardness prediction of TiAlN coatings, Proceeding 11th International Conference on Intelligent Systems Design and Applications (ISDA), November 22-24, Córdoba, Spain, pp , ISBN M.A. Ibrahim, S.Chuprat, R. Ahmad, N.K. Ibrahim and H. Haron, Nurse Scheduling with Fairness Criteria for Public Hospital, International Conference on Computer Applications and Industrial Electronics (ICCAIE 2011), 4-7 December, Pulau Pinang. 9. A.S.H. Basari, A.S.M. Jaya, M.R. Muhamad, M.N.A. Rahman, S.Z.M. Hashim, and H. Haron (2011), Application of ANFIS in predicting TiAlN coatings flank wear, 2011 Third International Conference on Computational Intelligence, Modelling & Simulation, Sept, pp , ISBN M. R. H. Mohd Adnan, Azlan Mohd Zain, and Habibollah Haron (2011), Consideration of Fuzzy Components for Prediction of Machining Performance: A Review, 2011 International Conference on Advances in Engineering (ICAE 2011) ICAE20, Dec., China. Procedia Engineering, Elsevier, 24, pp , ISSN: Lili Ayu Wulandhari, Habibollah Haron, and Roselina Sellehuddin (2011), The Mapping Algorithm of Triangular Vertex Chain Code from Thinned Binary Image, Proc. 2 nd International Conference on Recent Trends in Information Processing and Computing (IPC), Nov, LNICST, Springer, pp Sabarina Abu Bakar, Siti Sophiayati Yuhaniz, Hairudin Abd. Majid and Habibollah Haron (2011), A New Framework in Solving Tailing and Necking Problem of Thinned Binary Image, Proc. 2 nd International Conference on Recent Trends in Information Processing and Computing (IPC), Nov, LNICST, Springer, pp Akmal Rakhmadi, Mohd Shafry Mohd Rahim, Abdullah Bade, Habibolah Haron, and Ismail Mat Amin(2010), Loop Back Connected Component Labeling Algorithm and Its Implementation in Detecting Face, World Academy of Science, Engineering and Technology (WASET), Issue 64, Article No. 17, pp , ISSN Akmal Rakhmadi, Mohd Shafry Mohd Rahim, Ismail Mat Amin, Habibolah Haron, Mustafa Man and Mohd Zaidi Zakaria (2010), Fish Detection Based on Eyes Feature Using Neural Network Approach, The International Workshop on Advanced Image Technology (IWAIT2010) Kuala Lumpur, Jan.

9 3. Dewi Nasien, Habibollah Haron, and Siti Sophiayati Yuhaniz (2010), Metaheuristics Methods (GA & ACO) For Minimizing the Length of Freeman Chain Code from Handwritten Isolated Characters, World Academy of Science Engineering and Technology, Vol. 62 February 2010,, Article 41, pp , ISSN Dewi Nasien, Siti Sophiayati Yuhaniz, and Habibollah Haron, (2010), Support Vector Machine (SVM) For English Handwritten Character Recognition, Proceedings of The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010) March, Bali Island, Indonesia,Vol. 1, pp , ISBN Dewi Nasien, Siti Sophiayati Yuhaniz, and Habibollah Haron and (2010), Statistical Learning Theory and Learning Support Vector Machines (SVM), Proceedings of 2nd International Conference on Computer Research and Development (ICCRD 2010), 7-10 May, Kuala lumpur, Malaysia, pp , ISBN Dewi Nasien, Siti Sophiayati Yuhaniz, and Habibollah Haron, (2010), Handwritten Character Recognition Based on Freeman Chain Code and randomized Algorithm, Proceedings of International IT & Society Conference (IISC 2010), 8-10 June, Sabah, Malaysia,, Vol. 1, No. 1, pp , ISBN Mohd Hakimi Aiman Ibrahim, Suriayati Chuprat, Rabiah Ahmad, Habibollah Haron, Nuzulha Khilwani Ibrahim (2010), A Review on The Workload in The Nurse Rostering Problem, Proceedings of the 4th International Symposium on Information Technology(ITSIM '10), Kuala Lumpur, Malaysia, June 2010, Vol. 3, pp , ISSN Dewi Nasien, Habibollah Haron, and Siti Sophiayati Yuhaniz (2010), Recognition of Handwritten Isolated English Character Using One Continuous Route of Freeman Chain Code Representation and Feedforward Neural Network Classifier, World Academy of Science Engineering and Technology: International Conference on Computer, electrical and Systems Science and Engineering (ICCESSE 2010), July, Bali, Indonesia, ISSN Suriati Sadimon, Mohd Shahrizal Sunar, Dzulkifli Mohamed, and Habibollah Haron (2010), Computer Generated Caricature: A Survey, 2010 International Conference on CYBERWORLDS, October, Singapore., pp , ISBN Matondang M. Z., Samah A. A., Mardzuki S., Haron H., Majid H. A. and Ibrahim N. K. (2010), A Hybrid Framework for Validation of Two Dimensional Line Drawing based on Line Labeling and Graph Coloring Algorithm International Conference on Intelligent Network and Computing (ICINC 2010). Kuala Lumpur, Malaysia November, Edt. Ms. Zhang Yushu. IEEE Catalog Number: CFP1076K-PRT. ISBN: Institute of Electrical and Electronics Engineers, Inc., Vol. 2, pp Sabarina Abu Bakar, Siti Sophiayati Yuhaniz, Hairudin Abd Majid and Habibollah Haron (2010), Tailing and Necking Problems in Thinned Binary Image: A Review, 2010 International Conference on Intelligent Network and Computing (ICINC 2010). Kuala Lumpur, Malaysia November, Edt. Ms. Zhang Yushu. IEEE Catalog Number: CFP1076K-PRT. ISBN: Institute of Electrical and Electronics Engineers, Inc., Vol. 1, pp Muhammad Rofi Imtihan, Mohd Salihin Ngadiman and Habibollah Haron (2009), The Implementation of ERP Software Maintenance in Open Source Platforms, Proceedings of the International Conference Information Systems (IADIS 2009), Barcelona, Spain, February, pp ISBN Lili Ayu Wulandhari and Habibolah Haron (2009), Characteristic of Rectangular Vertex Chain Code for Shapes with Hole, Proceedings of the International Conference on Information Management and Engineering (ICIME 2009), Kuala Lumpur, Malaysia, 4-5 April, pp ISBN Hossein Rajabalipour Cheshmehgaz, Habibollah Haron and Muhammad Ikhwan Jambak (2009), The Improved Genetic Algorithm for Assingment Problems, Proceedings of the 2 nd International Conference on Signal Processing Systems, May, Singapore, pp ISBN Oldooz Dianat and Habibollah Haron (2009), Algorithm for Length Estimation Based on the Vertex Chain Code, Proceedings of the 2 nd International Conference on Signal Processing Systems, May, Singapore, pp ISBN Yuslinda Mad Yusop, Habibollah Haron, Mohammed Rafiq Abdul Kadir (2009), Classification Between Normal And Osteoporotic Cancellous, International Conference on Water Resources (IWCR2009) Special Session on Adaptive Computing, May, Langkawi, Malaysia, Paper ID Hossein Rajabalipour Cheshmehgaz, Habibollah Haron, Muhammad Ikhwan Jambak (2009), The Cellular Selection Mechanism for Multi Solution NP-hard Optimization Problems, International Conference on Water Resources (IWCR2009) Special Session on Adaptive Soft Computing, May, Langkawi, Malaysia, Paper ID 174.

10 Zolqernine Othman, Habibollah Haron, Mohammed Rafiq Abdul Kadir (2009), MRI Edge Detection using Canny Method, International Conference on Water Resources (IWCR2009) Special Session on Watershed Management, May, Langkawi, Malaysia, Paper ID Zirawani Baharum, Mohd. Salihin Ngadiman, and Habibollah Haron (2009), Critical Factors to Ensure the Successful of OS-ERP Implementation Based on Technical Requirement Point of View, Proceedings Third Asia International Conference on Modelling and Simulation Asia Modelling Symposium 2009, Bandung/Bali, Indonesia, May, pp ISBN Azlan Mohd Zain, Habibollah Haron and Safian Sharif (2009), Review of ANN Technique for Modeling Surface Roughness Performance Measure in Machining Process, Proceedings Third Asia International Conference on Modelling and Simulation Asia Modelling Symposium 2009, Bandung/Bali, Indonesia, May, pp ISBN Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2009), Application of Regression and ANN Techniques for Modeling of the Surface Roughness in End Milling Machining Process, Proceedings Third Asia International Conference on Modelling and Simulation Asia Modelling Symposium 2009, Bandung/Bali, Indonesia, May, pp ISBN Zuraini Sukimin and Habibollah Haron (2009), Extraction and Recognition Algorithm in 3D Object Features, Proceedings Third Asia International Conference on Modelling and Simulation Asia Modelling Symposium 2009, Bandung/Bali, Indonesia, May, pp ISBN Norhazlan Abd Hamid, Habibollah Haron, Muhammad Ikhwan Jambak, and Zuraini Sukimin (2009), An Overview of Robotic Simulation E-learning, Proceedings Third Asia International Conference on Modelling and Simulation Asia Modelling Symposium 2009, Bandung/Bali, Indonesia, May, pp ISBN Hossein Rajabalipour Cheshmehgaz, Habibollah Haron and Mohammad Reza Meybodi (2009), A Similarity-based Cellular Selection Mechanisim for Genetic algorithms to Solve Assignment Problems, Proceedings of 2009 International Conference on Computer Engineering and Applications, Manila, Philippine, 6-8 June, pp ISBN Haswadi Hasan, Habibollah Haron, Siti Zaiton Hashim, and Fakhrul Syakirin Omar (2009),, Logical Heuristic Algorithm in Extracting 2D Structure Thinned Binary Image into Freeman Chain Code (FCC), Visual Informatics: Bridging Research and Practice: Lecture Notes in Computer Science, Publisher: Springer, The 1st International Visual Informatics Conference 2009 (IVIC'09), November 2009, Bangi Equatorial Hotel, pp ISBN Haswadi Hasan, Habibollah Haron, and Siti Zaiton Hashim (2009), Freeman Chain Code Extraction using Differential Evolution (DE) and Particle Swarm Optimization (PSO), Proceedings of The International Conference of Soft Computing and Pattern Recognition (SoCPaR 2009), 4-7 December 2009, Melaka International Trade Centre (MITC), pp ISBN Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2009), Artificial Neural Network for redicting machining performance of Uncoated Carbide (WC-Co) in Milling Machining Operation. Proceedings of International Conference on Computer Technology and Development (ICCTD 2009), Kota Kinabalu, Malaysia November, pp ISBN Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2009), Genetic Algorithm for Optimizing Cutting Conditions of Uncoated Carbide (WC-Co) in Milling Machining Operation. Proceedings of Conference on Innovative Technologies in Intelligent System & Industrial Application 2009 (Citisia'09), Monash University, Sunway campus, Malaysia, July 2009, pp ISBN Hossein Rajabalipour Cheshmehgaz, Muhammad Ikhwan Jambak, and Habibollah Haron (2009), Modified Genetic Algorithms for Simple Assembly Line Balancing, Proceedings of International Conference on Software Engineering & Computer System, Oct, Kuantan, Malaysia, pp Zuraini Sukimin and Habibollah Haron (2008), Algorithm to Classify Features of DXF and Map the Feature of Machining Parameter, Proceedings of the 9 th Asia Pacific Industrial Engineering and Management Science Conference (APIEMS 2008), 3-5 Dec. 2008, pp Yuslinda Mad Yusop, Habibollah Haron, and Mohammed Rafiq Abdul Kadir (2008), New Development of Classifier for Prediction of Cancellous Bone Failure, Proceedings of the 9 th Asia Pacific Industrial Engineering and Management Science Conference (APIEMS 2008), 3-5 Dec. 2008, pp Muhammad Zaini Matondang, Samihah Mardzuki and Habibollah Haron (2008), Transformation of Engineering Sketch to Valid Solid Object, Proceedings of the 9 th Asia Pacific Industrial

11 Engineering and Management Science Conference (APIEMS 2008), 3-5 Dec. 2008, pp Muhammad Rofi Imtihan, Zirawani Baharum, Mohd Salihin Ngadiman, and Habibollah Haron(2008), Critical Factors in Ensuring the Success of Implementing Open Source ERP - Case Study in Malaysian Small Medium Enterprise, Proceedings of the 9 th Asia Pacific Industrial Engineering and Management Science Conference (APIEMS 2008), 3-5 Dec. 2008, pp Lili Ayu Wulandhari, Oldooz Dianat, and Habibollah Haron (2008), Formulation and Analysis of Length Estimators for Vertex Chain Code Cells, Proceedings of the 9 th Asia Pacific Industrial Engineering and Management Science Conference (APIEMS 2008), 3-5 Dec. 2008, pp Azlan Mohd Zain, Habibollah Haron and Safian Sharif (2008), Modeling of surface roughness for TiAIN coated cutting tool using Artificial Neural Network, Proceedings of EnCon2008, 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18-19, Kuching, Sarawak, Malaysia, pp Zirawani Baharum, Mohd Salihin Ngadiman, Habibollah Haron, and Suziyanti Marjudi (2008), The Development of Economic Enterprise Resource Planning for SME Using Holistic Approach, Proceedings of EnCon2008, 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18-19, Kuching, Sarawak, Malaysia, pp Yaseer Borozgi and Habibollah Haron (2008),, The Implementation of ERP for Ship Yard Company, Brunei International Conference on Engineering and Technology (BICET 2008), Brunei, 3-4 Nov Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah and Zolqernine Othman (2008), Micromotion of Metacarpophalangeal Joint Silicone Implants Under Sideways Loading, Proceedings of the International Conference on Biomedical Engineering, Nov 2008, Surabaya, Indonesia, pp Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah and Zolqernine Othman, Flexibility of Proximal Interphalangeal Joint (PIP) after Joint Replacement, Proceedings of the International Conference on Biomedical Engineering, Nov 2008, Surabaya, Indonesia, pp Muhammad Ikhwan Jambak, Habibollah Haron, and Dewi Nasien (2008), Development of Robot Simulation Software for Five Joints Mitsubishi RV-2AJ Using MATLAB/Simulink and V-Realm Builder, Proceedings on Fifth International Conference on Computer Graphics, Imaging and Visualization (CGIV 2008), Penang, Malaysia August pp Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2008), An overview of GA techniques for Surface Roughness Optimization in Milling Process, Proceedings on International Symposium on Information Technology 2008 Volume IV, KLCC, Kuala Lumpur August pp Zuraini Sukimin, and Habibollah Haron (2008), Geometric Entities Information for Feature Extraction of Solid Model Based on DXF File, Proceedings on International Symposium on Information Technology 2008 Volume III, KLCC, Kuala Lumpur August 2008, pp Muhammad Rofi Imtihan, Mohd Salihin Ngadiman, and Habibollah Haron (2008), An Alternative Model for ERP Maintenance Strategy, Proceedings 9 th ACIS International Conference on Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing (ICIS 2008), Phuket 6-8 August 2008, pp Arya Wirabhuana, Habibollah Haron, and Muhammad Rofi Imtihan (2008), Simulation and Reengineering of Truck Assembly Line, Second Asia International Conference on Modelling & Simulation, Kuala Lumpur, May 2008, pp Zuraini Sukimin, and Habibollah Haron (2008), Designing and Simulating Chopping Process using Workspace5, Proceedings of Second Asia International Conference on Modelling & Simulation, Kuala Lumpur, May 2008, pp Lili Ayu Wulandhari, Habibolah Haron, and Ariffin Mohammad (2008), The Mapping Algorithm of Rectangular Vertex Chain Code from Thinned Binary Image, International Conference on Engineering Optimization (EngOpt 2008), Rio de Janeiro, Brazil, June Samihah Mardzuki, and Habibollah Haron (2008), Algorithm To Label, Represent And Visualize Line Drawing, Proceedings of 4 th IMT-GT Regional Conference on Mathematics, Statistics and Their Applications (ICMSA 2008), Acheh, Indonesia 9-11 June. 19. Lili Ayu Wulandhari, and Habibollah Haron (2008), The Visualization Algorithm of Rectangular Vertex Chain Code, Proceedings of 4 th IMT-GT Regional Conference on Mathematics, Statistics and Their Applications (ICMSA 2008), Acheh, Indonesia 9-11 June. 20. Oldooz Dianat, and Habibollah Haron (2008), New Method For Extracting Five-Digit Base Chain Code From 3D Image, Proceedings of 4 th IMT-GT Regional Conference on Mathematics, Statistics and Their Applications (ICMSA 2008), Acheh, Indonesia 9-11 June.

12 21. Yuslinda Mad Yusop, Habibollah Haron, and Mohammed Rafiq Abdul Kadir (2008), 3D Reconstruction And Analysis Of Trabecular Bone Using Visualization And Modeling Technique, Proceedings of 4 th IMT-GT Regional Conference on Mathematics, Statistics and Their Applications (ICMSA 2008), Acheh, Indonesia, 9-11 June. 22. Zuraini Sukimin, and Habibollah Haron (2008), Framework In Determining Machining Parameter Based On Features Extraction From Dxf File, Proceedings of 4 th IMT-GT Regional Conference on Mathematics, Statistics and Their Applications (ICMSA 2008), Acheh, Indonesia 9-11 June. 23. Oldooz Dianat, and Habibollah Haron (2008), Performance Analysis of Length Estimators for Vertex Chain Code, Proceedings 5th International Conference on Information Technology and Applications (ICITA 2008), Cairns, Australia June, pp (2009 Elsevier Engineering Village) 24. Samihah Mardzuki, Muhamad Zaini Matondang, and Habibollah Haron (2008), Computational Approach in Validating Reconstructed Solid Model Based on Approximate Depth Values, Proceedings 5th International Conference on Information Technology and Applications (ICITA 2008), Cairns, Australia June, pp (2009 Elsevier Engineering Village) 25. Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah & Norazhar Nordin (2008), Miniplates Orientation for Fracture Fixation of the Mandibular Condyle, Proceedings of 4th Kuala Lumpur International Conference on Biomedical Engineering (BIMOMED 2008), June, Kuala Lumpur, Malaysia; Abu Osman, N.A.; Ibrahim, F.; Wan Abas, W.A.B.; Abdul Rahman, H.S.; Ting, H.N. (Eds.), XXIII, 908 p. In 2 volumes, Publisher: Springer ISBN: , pp Zirawani Baharum, Mohd Salihin Ngadiman, and Habibollah Haron (2008), An Alternative Framework of Open Source Enterprise Resource Planning (ERP) System for Small and Medium Enterprise (SME), Proceedings of Knowledge Management International Conference (KMICe 2008), Langkawi, Malaysia June, pp Zirawani Baharum, Mohd Salihin Ngadiman, and Habibollah Haron (2008), A Framework of Fully Open Source ERP System implemented in Malaysian SME: A Review, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Oldooz Dianat, and Habibollah Haron (2008), Comparing the Performance pf Length Extimators by implementation the Vertex Chain Code, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Zuraini Sukimin, and Habibollah Haron (2008), A Review on Machining Parameter based on Features Extraction from DXF File, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Muhammad Rofi Imtihan, Mohd Salihin Ngadiman, and Habibollah Haron (2008), An Alternative Model for ERP Maintenance Strategy, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Azlan Mohd Zain, Habibollah Haron, and Safian Sharif (2008), Non Conventional Approaches for Optimizing of Cutting Parameters in Machining Process: A Review, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Samihah Mardzuki and Habibollah Haron (2008), Interpretation of Drawing: A Review on Line Labeling, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Yuslinda Mad Yusop and Habibollah Haron (2008), 3D Reconstruction of Trabecular Bone Using Visualization and Modeling Techniques: A Review, The 4 th Postgraduate Annual Research Seminar (PARS08), 30 June - 3 July, Skudai, Johor, Malaysia, pp Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah & Muhammad Azuwan Aminullah (2008), Micromotion of Metacarpophalangeal Joint Silicone Implants Under Sideways Loading, International Conference on Biomedical Engineering, BME Days, Singapore, 3-6 December. 35. Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah & Muhammad Azuwan Aminullah (2008), Flexibility of Proximal Interphalangeal Joint (PIP) After Joint Replacement, International Conference on Biomedical Engineering, BME Days, Singapore, 3-6 December. 36. Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah, D Kurniawan & Norazhar Nordin (2008), The Effect of Different Types of Plates on the Stability of Condylar Fracture,International Conference on Biomedical Engineering, BME Days, Singapore, 3-6 December Muhamad Zaini Matondang, Habibollah Haron, and Mohamad Shukor Talib (2007), 3D Reconstruction of a Single 2D Line Drawing with Neural Network Approaches,