Grant agreement for: RESEARCH FOR THE BENEFIT OF SMEs

Size: px

Start display at page:

Download "Grant agreement for: RESEARCH FOR THE BENEFIT OF SMEs"

Sandra French
5 years ago
Views:

o n 1 D i s s e m i n a t i o n L e v e l : P u b l i c Project acronym:

1 Grant agreement for: RESEARCH FOR THE BENEFIT OF SMEs D5.2 R e p o r t o n D i s s e m i n a t i o n A c t i v i t i e s V e r s i o n 1 D i s s e m i n a t i o n L e v e l : P u b l i c Project acronym: 3DComplete Project full title: Efficient 3D Completeness Inspection Grant agreement no.:

2 Content 1 Introduction Project Logo Project Website Project Leaflet Press releases Scientific publications in Journals and Conferences Fairs attended Further planned Activities Seite 2

1 Introduction The purpose of this document which is part of work package 5, is to provide a final report about activities undertaken in the project 3DComplete to raise public awareness of the

3 1 Introduction The purpose of this document which is part of work package 5, is to provide a final report about activities undertaken in the project 3DComplete to raise public awareness of the project's topics and its results. These activities include dissemination dedicated to the wider public, scientific publications in journals and conferences, master thesis publications in other media fairs attended further planned activities This deliverable has strong relations to the "interim plan for use and dissemination of knowledge" (D7.1), and also to D7.2 final plan for use and dissemination of knowledge. 2 Project Logo Although a logo is no dissemination activity for itself it serves like a project branding. The 3DComplete logo has been designed and agreed by the project partners. This logo was used with all 3DComplete related documents in order to raise the recognition value of the project. Figure 1: 3DComplete Logo Seite 3

3 Project Website The project website can be found under the web address www.3dcomplete.eu. It was launched on 1st of September 2010 and was designed for two main reasons.

4 3 Project Website The project website can be found under the web address It was launched on 1st of September 2010 and was designed for two main reasons. First, in order to present the project aims and outputs to a wider public. And second, for sharing information amongst the project partners. Figure 2 shows the layout of the start screen which gives basic information about overall topics and aims of this project. Figure 2: Start Screen of 3DComplete Homepage Seite 4

The project website provides an excellent place to disseminate information to the wider public. There are the following dissemination routes on the website.

5 The project website provides an excellent place to disseminate information to the wider public. There are the following dissemination routes on the website. Outline and objectives of the project News & Events o Meetings held o Fairs attended o Conferences attended Project partners Public material o Project leaflet downloadable o Press releases - downloadable o List of dissemination activities with downloadable documents o Videos of preliminary results The full content of the website is detailed in deliverable 5.1. Following pictures show the partners web sites providing information about the 3DComplete project and linking to the project web site Figure 3: Metria homepage with information about 3DComplete project Seite 5

6 Figure 4: IT-Robotics home page with Information about 3DComplete project Seite 6

7 Figure 5: Profactor homepage with information about 3DComplete project Seite 7

8 Figure 6: Prodintec homepage with information about 3DComplete project Seite 8

9 Figure 7: Uni Padua homepage with information about 3DComplete project Seite 9

Figure 8: Ardoran homepage with information about 3DComplete project 4 Project Leaflet A 3DComplete project leaflet was designed, giving an overview of the project, its objectives and the project

10 Figure 8: Ardoran homepage with information about 3DComplete project 4 Project Leaflet A 3DComplete project leaflet was designed, giving an overview of the project, its objectives and the project consortium. Printed copies of the leaflet were distributed to the partners to be used for dissemination activities. A pdf version of this leaflet is available for download from the 3DComplete website. Additional to individual distribution of 3DComplete leaflets to interested customers, leaflets have also been distributed at following events: Robotica 2010, 17 th 19 th of November 2010, Milan, Italy Bimec 2011, 16 th 19 th of November 2011, Padua, Italy Meeting of the Spanish Network of Innovative Business Grouping (REDAEI) 2011, 22 nd of March 2011, Madrid, Spain AeroDays 2011, 30 th of March 1 st of April 2011, Madrid, Spain Robotica 2011, 16 th 19 th of November 2011, Milan, Italy Smart Frame Meeting, 26 th of June 2012, Brno, Czech Seite 10

releases are provided to give an overview of the project its objectives and the project partners.

11 Control 2012, 8 th 12 th of May 2012, Stuttgart, Germany Robotica 2012, 7 th 9 th of November 2012, Milan, Italy^ Figure 9: 3DComplete Leaflet 5 Press releases In order to promote the ideas of 3DComplete project and to attract future customers press releases are provided to give an overview of the project its objectives and the project partners. Profactor provided a first press release template to the project partners in English. The translation to local languages was be done be the partners itself. Seite 11

12 Following press releases has been published: , Prodintec and Metria, Press release about project start, El Comercio de Asturias (regional newspaper), printed in copies , Profactor, blog entry about project start, Profactor blog , UniPD, press release about project start, Homepage UniPD , UniPD, press release about project start, Finanza e Mercati, printed daily in copies , UniPD, press releases about project start, Il Sole 24 Ore, printed daily in copies 6 Scientific publications in Journals and Conferences International Computer Vision Summer School (ICVSS), Reducing the Problem of Occlusions in Laser-Triangulation Reconstruction ; M. Munaro, S. Michiletto, E. Menegatti; Sicily, Italy; July 11-16, 2011 (ICMVIPPA) International Conference on Machine Vision, Image Processing, and Pattern Analysis, Fast 2.5D model reconstruction of assembled parts with high occlusion for completeness inspection ; M. Munaro, S. Michiletto, E. W. Y. So, D. Alberton, E. Menegatti; Venice, Italy; November 2011 IAS-12, 12 th International Conference on Intelligent Autonomous Systems, Real-Time 3D Model Reconstruction with a Dual-Laser Triangulation System for Assembly Line Completeness Inspection, E. W. Y. So, M. Munaro, S. Michiletto, M. Antonello, E. Menegatti; Korea; June 2012 Computers in Industry: Special Issue on: 3D Imaging in Industry. 3DComplete: Efficient Completeness Inspection using a 2.5D Color Scanner, E. W. Y. So, M. Munaro, S. Michieletto, E. Menegatti, S. Tonello; Abstract accepted, full paper submitted for first review on September 21 st 2012 Seite 12

IEEE International Symposium on RObotic and Sensors Environments ROSE 2012); Calibration of a Dual-Laser Triangulation System for Assembly Line Completeness Inspection ; E. W. Y. So, S. Michiletto, E.

13 IEEE International Symposium on RObotic and Sensors Environments ROSE 2012); Calibration of a Dual-Laser Triangulation System for Assembly Line Completeness Inspection ; E. W. Y. So, S. Michiletto, E. Menegatti; Magdeburg, Germany; November 16 th 18 th, 2012; pp , Recipient of Best Paper Award 7 Fairs attended Biennial Exhibition for Mechatronics and Automation(BIMEC), October 2011, Milan, Italy BIMEC exhibition is dedicated to new technologies in industrial production with focus on assembly, handling, moving, robotics and industrial vision. IT-Robotics presented the 2.5D colour prototype at BIMEC Reconstruction could be showed nearly within real time. Control Fair 2012, May 2012, Stuttgart, Germany Figure 10: 3DComplete Booth at Control Fair 2012, Stuttgart, Germany The 3DComplete project consortium presented their project results at the CONTROL fair in Stuttgart, Germany (Hall 1, Booth 1074): 836 exhibitors from 31 countries around the world, visitors from 88 nations and m² exhibition space makes the Seite 13

14 CONTROL Fair the leading trade fair for all aspects of quality assurance. Two prototypes have been presented to the international visitors. One of them demonstrated the possibilities of using ortho-image technology. The second one demonstrated both 2.5D scanning technologies (monochrome and colour) in combination with virtual sensor technology. Especially the combination of 3D and 2D within one physical sensor attracted many visitors and was starting point for some interesting discussions about possible applications for this technology. 8 Further planned Activities Further planned Publications IEEE Transactions on Instrumentation and Measurement, Calibration of a Dual Laser Triangulation System using Planar Patterns British Machine Vision Conference; Planar Homographies for Image Stitching with 3D Triangulation Cameras 3D complete: Industrial inspection system based on orthophotography techniques International Journal of Comptuer Vision, Study of the performance increase in the calculation of normalised cross-correlation by means of GPU computation Further planned Dissemination Activities UNIPD has commissioned to a film maker company to produce a video about the 2.5D color scanner and the completeness inspection system developed at UNIPD to show the results of 3DComplete project. The video will be available at the beginning of March It will be posted on the IAS-Lab (UNIPD) official website and IT+Robotics web site and also in the 3dcomplete.eu website. Seite 14

VALERI - A COLLABORATIVE MOBILE MANIPULATOR FOR AEROSPACE PRODUCTION. CLAWAR 2016, London, UK Fraunhofer IFF Robotersysteme

VALERI - A COLLABORATIVE MOBILE MANIPULATOR FOR AEROSPACE PRODUCTION CLAWAR 2016, London, UK Fraunhofer IFF Robotersysteme Fraunhofer IFF, Magdeburg 2016 VALERI - A collaborative mobile manipulator for