A National Collaboration Initiative for the Canadian Aerospace Industry
|
|
- Frank Hancock
- 5 years ago
- Views:
Transcription
1
2 A National Collaboration Initiative for the Canadian Aerospace Industry
3 CANADIAN AEROSPACE INDUSTRY Innovation* Each year, the industry invests $1.7 billion into R&D R&D investment increased by nearly 40% in the last five years Canadian R&D Intensity Based on GDP ( )¹ 20% 1% 4% * Aerospace Industries Association of Canada & Industry Canada (2014). The State of the Canadian Aerospace Industry. 3
4 About CARIC Collaborative approaches to R&D yield better results for both participants and the economy. This is particularly true for an industry like aerospace, in which R&D is a costly, long-term undertaking. Emerson Report Officially launched in April 2014 $30M financial support from Industry Canada Honourable James Moore, announcing his endorsement of the creation of a new national aerospace research and technology network. 4
5 CARIC s Mission 1. To facilitate communications and collaboration among aerospace companies, researchers and academics and provide financial support to collaborative R&TD projects. 5
6 CARIC s Mission 2. To launch initiatives whose primary purpose is to: serve as catalysts for collaboration that can help to overcome the silo effects; promote faster, more relevant R&D. 6
7 Our raison d être Our core business: R&D projects that lead to innovative solutions Industry focused Our vision: a key facilitator for the Canadian aerospace research and technology development 7
8 Coast-to-Coast Footprint Head office Regional office Vancouver Winnipeg Montréal Ottawa Halifax 8 Toronto
9 Outcomes - Metrics 1) CARIC accelerates aerospace research Research projects (TRL 1-6), technologies in maturation 2) CARIC supports student training Talent development 3) CARIC facilitates aerospace network outreach Research Forum & Workshops on cutting edge research fields 4) CARIC supports the innovation system Inventory of capabilities, Technological RM, Mobilizing SMEs
10 Industrial Members
11 Universities, Colleges and Research Centres
12 Project Execution Project Planning Project Strategic Development COMMERCIALIZATION PRODUCTS Fundamental Research University Research Demonstrations, Applied Research NRC + Research Organizations Product development, manufacturing, in-service, end of life Industry R&TD Future Major Platforms (FMP) Joint Strike Fighter (JSF), other NSERC 0-50% industry funding CRIAQ 25% industry funding NRC 50% funding CARIC 25-50% industry funding GARDN 50% industry funding Industry R&TD 100% industry funding Road Maps : Canadian Aerospace Environmental - Technologies RM Diagnostic and Prognostic Health Moniroting RM Unmanned Aerial Vehicle RM INCREASING INDUSTRY INVOLVEMENT / FUNDING FUNDING NSERC (Natural Sciences and Engineering Research Council of Canada) CFI (Canada Foundation for Innovation) (equipment) IRC (Industrial Research Chairs) CRIAQ (Consortium for Research and Innovation in Aerospace in Quebec) CARIC (Consortium for Aerospace Research and Innovation in Canada) Universities TC-TDC (Transport Canada Transport Development Centre) NRC Aerospace (National Research Council Canada) DRDC (Defence Research Development Centre) SDTC (Sustainable Development Technology Canada) GARDN (Green Aviation Research and Development Network) BL-NCE (Business-Led Networks of Centres of Excellence() NRC-IRAP (Industrial Research Assistance Program) Regional Funds SA2GE (Smart, Affordable, Green, Efficient) IC-SADI (IC - Strategic Aerospace and Defence Initiative) ITB (Industrial Technology Benefits) SR&ED (Scientific Research and Experimental Development Tax Incentive) IC (Industry Canada) BDC (Business Development Bank of Canada) EDC (Export Development Canada) DFATD (Department Foreign Affiars Trade & Development) Sep. 2015
13 Research Themes Program management framework Acoustics, noise control, environment, security, icing (ENV) Air operation and human factors - organizational innovation (OPR) Autonomous systems (AUT) Avionics and control (AVIO) Composites (COMP) Diagnostics, pronostics, surveillance of components (DPHM) Interior design (INT) Manufacturing and assembly processes, quality assurance (MANU) Modeling, simulation, multidisciplinary optimization (MDO) Product and system development, productivity (PLE-P) Supply chain optimization and LEAN (LEAN) 13
14 Achiements Projects (Year 1) Number Approved* Project Total Value CARIC s Part CARIC Leverage Low-TRL 7 5,293.3 K$ K$ 1/13,1 Mid-TRL 6 7,838.0 K$ 3,803.7 K$ 1/2,06 Total 13 13,131,3K$ 4,206.6 K$ 1/3,12 CANNAPE 3 applications selected * Two have been launched 14
15 Canadian R&D Capabilities: An overview
16 Atlantic VERSATILE - CO-OPERATIVE - AGILE Marine & Shipbuiding Technologies Defense & Security Ocean Technologies Unmanned Systems for harsh environments Big Data Analytics (Global convention in 2017) Excellent support from governments Fantastic connectivity with Europe and North East USA
17 Mobilizing Innovation Over 60 campus locations Acadia University Cape Breton University College of the North Atlantic Dalhousie University Holland College Memorial University Mount Alison University Mount Saint Vincent University Nova Scotia Agricultural College Collège Communautaire du Nouveau Brunswick New Brunswick Community College NSCAD University St. Francis Xavier University Saint Mary s University Université de Moncton University of New Brunswick St. Thomas University University of Prince Edward Island
18 Atlantic: Few examples COMP MANU AUT MDO PLE-P DPHM AVIO Composite manufacturing Development of high strength sustainable materials and composites Thin film deposition Machine learning, Ad-hoc networking Robotic articulation and design optimisation for AUT processes Modelling and simulation development platform for crew-served systems Machine learning Utilization of Natural Language analysis for improved productivity Big Data and Artificial Intelligence processing, Security of data Threat detection and visualization of threat to aerospace systems
19 Quebec: The Heart of the Canadian Aerospace R&D 70% R&D in Canada 4 OEMs Strong Tier 1 presence Dense concentration of SMEs Aircraft Integration Technologies Rotorcraft Technologies Engine Technologies Modeling and Simulation Platforms Space Technologies Landing gears Avionics Advanced Manufacturing Complex Composites
20 Quebec: The Heart of the Canadian Aerospace R&D CRIAQ Model for Collaborative Research in Aerospace Tech Demo SA²GE for Smart Affordable Green Efficient Unique Academic & Research Institutions Four universities with a worldwide reputation National Research Council of Canada Canadian Space Agency Qualified and competitive human capital engineers of which in aerospace Highest concentration of qualified technicians
21 One of the top 3 Aerospace Clusters in the world Seattle Montreal Midlands Hamburg Komsomols k Shenyang Wichita Toulouse Munich Sacheon Nagoya Sao José Dos Campos Leading Clusters Established Clusters Emerging Clusters
22 July 1910, The First Aviation Meeting, Montreal, Quebec. The largest in North America Aero Club of Canada: Competitions, Demonstration flights
23 Ontario Solid presence of Tier 1 Innovative SMEs Downsview Aerospace Innovation and Research Hub Canadore s Aerospace Programs Development Advanced Manufacturing Facilities Test site Development for Unmanned Systems Rocket motors and launch capability
24 Ontario Regional Turboprop Aircraft Integration Business Jet Aircraft Integration Helicopters Unmanned Aerial Vehicles & Systems Small and Medium Turbine Engines Landing Gear Systems Integrated Avionics Systems Simulation / Training Systems Space Robotics, Imaging, Communications Systems
25 Ontario: few examples
26 Central Strong Civil and Military MRO activities Composites manufacturing Unmanned Systems Technology Advanced electronics Engine Icing Testing Facilities
27 Central Unique Aircraft Engine Testing, Research and Development Centres Engine test stands capable of up to 150,000 lbs of thrust International collaborations: GE/ StandardAero Ltd and Rolls-Royce / Pratt & Whitney Composites Research, Development and Commercialization Develops and commercializes innovative composite technologies from concept development through to prototyping and production, including business development support FibreCITY fibre grading capability establishing global standards for biofibre characterization and selection for application in aerospace applications such as aircraft interiors
28 Central Global centre of excellence in synchrotron science Canadian Light Source - national centre for synchrotron research, including advanced x-ray imaging, non-destructive testing, and bulk and surface investigations from macro structures to nano structures, supports development of applications for aeronautics and space Collaborative Aerospace Manufacturing and MRO Research in non-destructive inspection, advanced laser welding, cladding and cutting, and satellite engineering. Collaborative research projects from TRLs 2-7. Centres include Laser Ultrasonic systems specifically configured for aerospace composites, multiple laser welding, cladding and cutting technologies, Class 8 clean rooms and satellite engineering labs, and industry sponsored research chairs
29 West World class knowledge and capabilities in aerial suppression and firefighting field Speciality Civil and Defense integrated MRO Composites Knowledge Transfer Network Modeling, Simulation & Analytics Surveillance & Intelligence, satellite, robotics, geospatial
30 West ISS & Engineering In-Service Support (ISS) cluster with a strong engineering expertise for fixed and rotary aircraft for both civilian and military applications. Focused on the high value activities typically including aircraft modifications, heavy overhaul and upgrading and mature aircraft sustainment. Space & UAVs Largest and most capable space company in the country, MDA. Capabilities to support the Space and UAV segments with cutting edge capabilities such as information fusion, aviation data management, resource monitoring, and other opportunities that leverage satellites and UAVs.
31 West Aviation Training Military and civilian pilots for both fixed and rotary wing aircraft Many firms that specialized also aircraft maintenance, airfield support and air traffic control training. Close ties with the rapidly expanding Asia-Pacific market. Academic Support Technical skilled trades training to advanced highly specialized engineering programs and excellent research and development programs. Examples academic research and development centres include: UBC Composites Research Network SFU 4D Labs
32 Conclusion World class universities, colleges and research centers Leading Innovative companies CARIC - A powerful tool to improve competitiveness of Canadian industry through innovation resulting from increased collaborative R&D International R&D Strategy
A National Collaboration Initiative for the Canadian Aerospace Industry
A National Collaboration Initiative for the Canadian Aerospace Industry AIAC Pacific Outreach Program UBC (O) Kelowna 25 March 2015 Funding partner: Canadian Aerospace Industry * Economic Impact Over 700
More informationNRC Aerospace and Efforts to Promote Technology Development Partnerships
NRC Aerospace NRC Aerospace and Efforts to Promote Technology Development Partnerships Jerzy Komorowski, General Manager, NRC Aerospace Manitoba Aerospace Workshop, January 16-17, 2013 NRC - the Government
More informationInformation, Networking and Engagement Event on Canadian Aerospace Initiatives Post Emerson
Information, Networking and Engagement Event on Canadian Aerospace Initiatives Post Emerson Organized by Aerospace Industries Association of Canada In collaboration with CRIAQ, GARDN, NRC and NRC-IRAP
More informationNRC Aerospace Institute for Aerospace Research. NRC-IAGT Collaborative Forum on Future Gas Turbine Challenges and Opportunities
NRC Aerospace Institute for Aerospace Research NRC-IAGT Collaborative Forum on Future Gas Turbine Challenges and Opportunities NRC: A National Institution Federal government agency Provides essential elements
More informationNRC s Role in the Future of Aerospace in Canada
NRC s Role in the Future of Aerospace in Canada Dr. Michael Benner, Director R&D, Aerodynamics March 23, 2017 NRC at a glance A national organization with regional presence and global reach NRC DELIVERS
More informationINVEST IN PROFIT PERFORMANCE STABILITY ERFORMANCE INNOVATION DIVER IVERSITY STABILITY PROFIT PERF INNOVATION PROFIT DIVERSITY ST
PROFIT PERFORMANCE STABILITY ERFORMANCE INNOVATION DIVER INVEST IN DIVERSITY STABILITY PROFIT PERF NNOVATION PROFIT DIVERSITY STA STABILITY DIVERSITY INNOVATION CANADA S COMPETITIVE ADVANTAGES IVERSITY
More informationGovernment of Canada Presentation to Air Transport Network Conference on International Co-operation
Government of Canada Presentation to Air Transport Network Conference on International Co-operation London, UK March 13-14, 2008 Chummer Farina Industry Canada Jerzy Komorowski National Research Council
More informationAÉRO MONTREAL. «Outreach Initiatives» Canadian Council for Aviation & Aerospace Labour Market Strategy Day. November 09, 2017
AÉRO MONTREAL «Outreach Initiatives» Canadian Council for Aviation & Aerospace Labour Market Strategy Day November 09, 2017 OVERVIEW OF QUEBEC S AEROSPACE INDUSTRY A key contribution to the economy 2 Québec
More informationC-MER Canadian Marine Energy Research Network
C-MER Canadian Marine Energy Research Network Andrew Henry Executive Director, Energy Research Dalhousie University NS Energy R&D Forum Antigonish, May 21, 2008 Canadian Marine Energy Research Network
More informationAtlantic Canada s aerospace and defence industry has reached overall revenues of C$1 billion, and the momentum continues.
Located on Canada s east coast and situated strategically between the United States and Europe, Atlantic Canada has developed a strong international reputation for supplying quality products and services,
More informationCanadian Network for Innovative Shipbuilding, Marine Research and Training (CISMaRT):
Canadian Network for Innovative Shipbuilding, Marine Research and Training (CISMaRT): Steering a Course for Collaborative Marine Innovation in Canada Wei Qiu, Head and Professor Department of Ocean and
More informationCANADA S OCEAN SUPERCLUSTER DRAFT NOVEMBER 1
CANADA S OCEAN SUPERCLUSTER AGENDA 01 What is the Ocean Supercluster? 02 What is the opportunity for business? 03 What is the opportunity for Canada? 04 How will the Ocean Supercluster work? 05 What are
More informationGrowing industrial services and applied research potential
Growing industrial services and applied research potential Over the past decade, the Collège communautaire du Nouveau-Brunswick (CCNB) has stepped up its efforts to support and promote innovation and technology
More informationManitoba Aerospace Technology Road Map
Manitoba Aerospace Technology Road Map Kim Olson, Standard Aero Ken Webb, Manitoba Aerospace Association 20 February 2014 Why invest in a Technology Road Map? The Manitoba Aerospace Sector supports over
More informationDefence R&D Canada. Valcartier Research Centre. Presented by Richard Lestage. Photonics Workshop of January 17, 2019 National Research Council, Ottawa
Defence R&D Canada Valcartier Research Centre Presented by Richard Lestage Valcartier Research Centre Photonics Workshop of January 17, 2019 National Research Council, Ottawa DRDC History 1945 (CARDE)
More informationThe Aerospace Industry - an integral part of Innovative Sweden. Aerodays Vienna
Aeronautics Related R&D Support and Activities in Sweden The Aerospace Industry - an integral part of Innovative Sweden Aerodays Vienna Hans Christer Olson Ministry of Industry, Employment and Communications
More informationWorking Group Report. Technology Development, Demonstration, and Commercialization
Working Group Report Technology Development, Demonstration, and Commercialization September 17, 2012 Technology Development, Demonstration, and Commercialization This report reflects the views of one of
More informationNova Scotia s Energy Matrix: Connecting the Dots. Stephen Dempsey Executive Director
Nova Scotia s Energy Matrix: Connecting the Dots Stephen Dempsey Executive Director OERA is: Independent, contract research not-for-profit corporation Mission is to lead energy research that enables the
More informationAgenda Item No. C-29 AGENDA ITEM BRIEFING. Vice Chancellor and Dean of Engineering Director, Texas A&M Engineering Experiment Station
Agenda Item No. C-29 AGENDA ITEM BRIEFING Submitted by: Subject: M. Katherine Banks Vice Chancellor and Dean of Engineering Director, Texas A&M Engineering Experiment Station Establishment of the Center
More informationAeronautics Supply Chain in Greece Public Private partnership. The missing link Professor Vassilis KOSTOPOULOS
Aeronautics Supply Chain in Greece Public Private partnership. The missing link Professor Vassilis KOSTOPOULOS Applied Mechanics Laboratory (AML) Department of Mechanical Engineering and Aeronautics University
More informationThe Industrial Strategy Challenge Fund
The Industrial Strategy Challenge Fund Mike Biddle Programme Director Industrial Strategy Challenge Fund @Mike_Biddle Harwell - 28 th November 2017 (v4) [Official] Overview 1. Industrial Strategy & the
More informationOcean Science and Technology Overview. Jane Rutherford
Ocean Science and Technology Overview Jane Rutherford Foreign Affairs and International Trade Canada Meeting of the EU-Canada JSTCC Brussels, March 6, 2013 Outline Outline Marine clusters Context Priorities
More informationVENTURE CAPITAL MONITOR
Q4 213 VENTURE CAPITAL MONITOR A QUARTERLY UPDATE ON THE CANADIAN VENTURE CAPITAL INDUSTRY www.ic.gc.ca/vcmonitor This publication by the Small Business Branch provides current information about the venture
More informationInternational Cooperation for Small Satellite Development
International Cooperation for Small Satellite Development Milind Pimprikar, Rick Earles CANEUS International Andrew Quintero The Aerospace Corporation Fredrik Bruhn Angstrom Aerospace CANEUS Background
More informationGrowing Opportunity. Jacques St-Laurent. President Bell Helicopter Textron Canada LTD. Analyst Briefing November 30, 2006
Growing Opportunity Jacques St-Laurent President Bell Helicopter Textron Canada LTD Analyst Briefing November 30, 2006 1 Bell Helicopter Mirabel Operations Supporting Bell s Journey to Premier Commercial
More informationATLANTIC CANADIAN OFFSHORE INDUSTRY BUSINESSES HEAD TO BRAZIL
ATLANTIC CANADIAN OFFSHORE INDUSTRY BUSINESSES HEAD TO BRAZIL MONCTON (NB) October 2, 2011 A delegation of 21 companies and organizations from the supply and services sector of Atlantic Canada s offshore
More informationSparking a New Economy. Canada s Advanced Manufacturing Supercluster
Sparking a New Economy Canada s Advanced Manufacturing Supercluster Canada s Advanced Manufacturing Supercluster Canada's Advanced Manufacturing Supercluster Strategy will leverage Canada s innovation
More informationVisit of Northrop Grumman. Systems Engineering/ Engineering Design 12/5/16. Jim Scanlan
Visit of Northrop Grumman Systems Engineering/ Engineering Design 12/5/16 Jim Scanlan Southampton Has eight University Technology Centres; four aerospace related; Rolls-Royce UTC in design Rolls-Royce
More informationMetrology at NRC Canada:
Metrology at NRC Canada: An NMI in an RTO Context Alan Steele NRC Measurement Science and Standards SIM Innovation Workshop Montevideo, Uruguay November 16, 2016 NRC: Canada s Research Technology Organization
More informationINTELLECTUAL PROPERTY FINANCIAL SUPPORT
DARE TO INNOVATE The Centre technologique en aérospatiale (CTA) is a center of applied research that offers a range of integrated services to help clients and partners increase their knowledge, productivity
More informationEnabling the Internet of Everything
Enabling the Internet of Everything Printable, flexible and hybrid electronics (FHE) have the power to add intelligence to and connect ordinary objects economically Scaling up the Flexible and Hybrid Electronics
More informationKIC EIT Raw Materials
KIC EIT Raw Materials Text Text Dr. Lisa Maria T. O Donoghue Dublin 18.10.17 Picture source http://www.falconautoonline.com/incoming-material/ What is a EIT-KIC KIC (acronym of Knowledge Innovation Community)
More informationTestimony to the President s Commission on Implementation of the United States Space Exploration Policy
Testimony to the President s Commission on Implementation of the United States Space Exploration Policy Cort Durocher, Executive Director American Institute of Aeronautics and Astronautics NTSB Conference
More informationQ INTRODUCTION VC ACTIVITY OVERVIEW. Summary of investment and fundraising. ($ millions)
www.sme-fdi.gc.ca/vcmonitor INTRODUCTION This issue discusses venture capital (VC) investment and fundraising activity in Canada during the third quarter of 21, covering July through September 21. VC ACTIVITY
More informationIEEE IoT Vertical and Topical Summit - Anchorage September 18th-20th, 2017 Anchorage, Alaska. Call for Participation and Proposals
IEEE IoT Vertical and Topical Summit - Anchorage September 18th-20th, 2017 Anchorage, Alaska Call for Participation and Proposals With its dispersed population, cultural diversity, vast area, varied geography,
More informationTRIUMF ACCELERATING CANADIAN BUSINESS THROUGH SCIENCE AND INNOVATION Pre-Budget Consultation
Canada s national laboratory for particle and nuclear physics Laboratoire national canadien pour la recherche en physique nucléaire et en physique des particules TRIUMF ACCELERATING CANADIAN BUSINESS THROUGH
More informationReach for the skies. The Aerospace Growth Partnership. Industry and government working together to secure the future for UK aerospace
Reach for the skies The Aerospace Growth Partnership Industry and government working together to secure the future for UK aerospace MAINTAINING OUR LEADERSHIP AS AN AEROSPACE NATION The UK has a great
More informationDoD Research and Engineering
DoD Research and Engineering Defense Innovation Unit Experimental Townhall Mr. Stephen Welby Assistant Secretary of Defense for Research and Engineering February 18, 2016 Preserving Technological Superiority
More informationRESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506)
RESEARCH & DEVELOPMENT Dr. Mohsen Mohammadi PO Box 4400, 15 Dineen Drive Fredericton, New Brunswick Canada E3B 5A3 506) 458-7104 mmohamm2@unb.ca COMMERCIALIZATION Dr. Craig Murphy 300 Union Street Saint
More informationInnovation in the Aerospace & Defence Industry - A European Perspective
Innovation in the Aerospace & Defence Industry - A European Perspective Daniel DEVILLER EADS Chief Technology Officer Yokohama, September 1, 2004 About Innovation It is not the strongest of the species
More informationEmbraer: Brazil s pioneering aviation giant
14 December 2017 Embraer: Brazil s pioneering aviation giant By Catherine Jewell, Communications Division, WIPO Embraer is one of the world s leading manufacturers of commercial and executive jets, with
More informationTake a Closer Look at Québec
Take a Closer Look at Québec Lombardy s challenge for competitiveness CANADA SEMINAR Québec in 2010 Vancouver CANADA UNITED STATES MEXICO Mexico Atlanta QUÉBEC Québec Montréal Toronto Boston Detroit Chicago
More informationCOMPETITIVE BUSINESS ENVIRONMENT
CANADA IS OPEN FOR BUSINESS AND WELCOMES FOREIGN INVESTMENT COMPETITIVE BUSINESS ENVIRONMENT CANADA IS THE EASIEST PLACE TO START A BUSINESS IN THE G-7, ACCORDING TO THE WORLD BANK NUMBER OF PROCEDURES
More informationAssessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018.
Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit 25-27 April 2018 Assessment Report 1. Scientific ambition, quality and impact Rating: 3.5 The
More informationApproach for Development and Commercialization of Micro and NanoTechnologies for Aerospace Applications Dr. OUDEA Coumar EADS-ST, and Member of Board
Approach for Development and Commercialization of Micro and NanoTechnologies for Aerospace Applications Dr. OUDEA Coumar EADS-ST, and Member of Board of Directors CANEUS Organization CANEUS CANEUS began
More informationCatapult Network Summary
Catapult Network Summary 2017 TURNING RESEARCH AND INNOVATION INTO GROWTH Economic impact through turning opportunities into real-world applications The UK s Catapults harness world-class strengths in
More informationMetrology at NRC Canada: An NMI in an RTO Context
Metrology at NRC Canada: An NMI in an RTO Context Alan Steele NRC Measurement Science and Standards National Laboratory Association South Africa Test and Measurement Conference and Workshop September 30,
More informationSTATE ADVANCED MANUFACTURING POLICIES AND PROGRAMS. As at February 2018
ANNEXURE STATE ADVANCED MANUFACTURING POLICIES AND PROGRAMS As at February 2018 Queensland The Queensland Advanced Manufacturing 10-Year Roadmap and Action Plan was finalised in December 2016 after consultation
More informationInternational Collaboration Tools for Industrial Development
International Collaboration Tools for Industrial Development 6 th CSIR Conference 5-6 October, 2017 Dan Nagy Managing Director IMS International dnagy@ims.org U.S. DEPARTMENT OF COMMERCE (NIST) 28 Countries
More informationThe Army s Future Tactical UAS Technology Demonstrator Program
The Army s Future Tactical UAS Technology Demonstrator Program This information product has been reviewed and approved for public release, distribution A (Unlimited). Review completed by the AMRDEC Public
More informationBrief to the. Senate Standing Committee on Social Affairs, Science and Technology. Dr. Eliot A. Phillipson President and CEO
Brief to the Senate Standing Committee on Social Affairs, Science and Technology Dr. Eliot A. Phillipson President and CEO June 14, 2010 Table of Contents Role of the Canada Foundation for Innovation (CFI)...1
More informationShared Investment. Shared Success. ReMAP Call for Proposals by Expression of Interest
Shared Investment. Shared Success. ReMAP 2.0 2018 Call for Proposals by Expression of Interest What s a BL-NCE? Refined Manufacturing Acceleration Process (ReMAP) is an innovation accelerator focused on
More informationTechnology Development Partnerships Thoughts and suggestions based on our experience, including the recently created Composites Research Network
Technology Development Partnerships Thoughts and suggestions based on our experience, including the recently created Composites Research Network Anoush Poursartip Director, CRN and Professor of Materials
More information10 th APEC TRANSPORTATION MINISTERIAL MEETING 7 th October 2017 Port Moresby, Papua New Guinea Ministerial Statement
10 th APEC TRANSPORTATION MINISTERIAL MEETING 7 th October 2017 Port Moresby, Papua New Guinea Ministerial Statement 1. We, the Ministers responsible for transportation, met in Port Moresby, Papua New
More informationMinistry of Industry. Indonesia s 4 th Industrial Revolution. Making Indonesia 4.0. Benchmarking Implementasi Industri 4.0 A.T.
Ministry of Industry s 4 th Industrial Revolution Making 4.0 Benchmarking Implementasi Industri 4.0 A.T. Kearney Industry 4.0 initiative is the global trend in the manufacturing industry End of 18 th century
More informationInnovation for Defence Excellence and Security (IDEaS)
ASSISTANT DEPUTY MINISTER (SCIENCE AND TECHNOLOGY) Innovation for Defence Excellence and Security (IDEaS) Department of National Defence November 2017 Innovative technology, knowledge, and problem solving
More informationSurrey Knowledge Transfer Account
Surrey Knowledge Transfer Account Innovation Powered. Innovation Powered Innovation is vital if the UK is to remain competitive on the world stage. The University of Surrey has a track record of successful
More informationThe Sherwin-Williams Company
The Sherwin-Williams Company "What is Worth Doing is Worth Doing Well." Founded in 1866 in Cleveland, Ohio #1 coatings company in the Americas #3 coatings company worldwide Over 40,000 employees worldwide
More informationIndustrial Strategy Challenge Fund. Dr Jon Wood Manager for
Industrial Strategy Challenge Fund Dr Jon Wood Manager for Wales @innovatejon A landmark moment for the country We are allocating a further 2.3 billion for investment in R&D. And we ll increase the main
More informationIndustrial and Regional Benefits (IRB s)
Industry Canada Opportunities for Collaboration Jim Castellano - Sector Development Officer, Aerospace, Defence and Marine Branch Government of Canada Ottawa, Ontario Jim.Castellano@ic.gc.ca - 613-954-3747
More informationSupporting the Industrialisation of Aerospace Technologies. Ms Marié Botha
Supporting the Industrialisation of Aerospace Technologies Ms Marié Botha Overview Best practice History of the Aerospace Industry Support Initiative CSIR as a vehicle for aerospace industry development
More informationHigh Value Manufacturing Catapult
High Value Manufacturing Catapult Dr Daniel Thompson Senior Technology Officer @ National Composites Centre HVM Catapult Presentation 11 February 2016 UK Manufacturing the Facts The global manufacturing
More informationTrends in the Defense Industrial Base. Office of the Deputy Assistant Secretary of Defense Manufacturing and Industrial Base Policy
Trends in the Defense Industrial Base Office of the Deputy Assistant Secretary of Defense Manufacturing and Industrial Base Policy March 29 th, 2017 Importance of the defense industrial base Our margin
More informationPreliminary Findings for Innovation Case Study on Canadian Fuel Cell Technology
Preliminary Findings for Innovation Case Study on Canadian Fuel Cell Technology Glenn MacDonell, Director of Energy Department of Industry Government of Canada Presentation to OECD Working Group September
More informationOCEANS 2016 HALIFAX INVESTMENT PROFILE
OCEANS 2016 HALIFAX INVESTMENT PROFILE OCEANS It should be no surprise that Halifax is a world leader in the oceans sector, given its strategic location on North America s east coast, the focus of its
More informationREPORT DEFENCE INNOVATION
DEFENCE INNOVATION REPORT Canada s defence industry pushes the frontiers of applied knowledge, producing the highest quality products and services for Canada s Armed Forces and our allies. We are proud
More informationApplied Research APPLIED KNOWLEDGE INNOVATIVE RESEARCH PROVEN RESULTS. nscc.ca/appliedresearch
nscc.ca/appliedresearch Applied Research APPLIED KNOWLEDGE INNOVATIVE RESEARCH PROVEN RESULTS NSCC Applied Research Applied Research at NSCC is an extension of the College s mission and is embedded in
More informationMedicines Manufacturing in the UK 2017
Medicines Manufacturing in the UK 2017 Moderator: Magda Papadaki, PhD Head of Manufacturing Innovation The Association of the British Pharmaceutical Industry Medicines Manufacturing Industry Partnership
More informationNASA TA-12 Roadmap Review: Manufacturing and Cross Cutting
NASA TA-12 Roadmap Review: Manufacturing and Cross Cutting Dr. Ming C. Leu Keith and Pat Bailey Missouri Distinguished Professor Director, Center for Aerospace Manufacturing Technologies Director, Intelligent
More informationResiliency Planning Charrette Charrette de planification de la résilience
"Your Environmental Trust Fund at Work" "Votre Fonds en fiducie pour l'environnement au travail" Thanks to our Sponsors/Contributors: Gold Sponsor: Silver Sponsor: In-Kind Contributions: Project made possible
More informationClusters 2006 LYON RHONE-ALPES
Clusters 2006 LYON RHONE-ALPES ISRAELI AEROSPACE CLUSTER PERSPECTIVES AND VISION Dr. David Harari President IAI-Europe 1 ISRAEL AEROSPACE INFRASTRUCTURE Israel has become a hothouse for some of the most
More informationAn Introduction to China s Science and Technology Policy
An Introduction to China s Science and Technology Policy SHANG Yong, Ph.D. Vice Minister Ministry of Science and Technology, China and Senior Fellow Belfer Center for Science and International Affairs
More informationTHE AEROSPACE INDUSTRY IN MEXICO AND WHAT THE TECNOLÓGICO DE MONTERREY IS DOING TO SUPPORT ITS DEVELOPMENT
THE AEROSPACE INDUSTRY IN MEXICO AND WHAT THE TECNOLÓGICO DE MONTERREY IS DOING TO SUPPORT ITS DEVELOPMENT Dr. Antonio Pita Tecnológico de Monterrey Wirtschaftstag Mexico Hannover, 6 th October 2010 The
More informationResearch & Technology Overview
Research & Technology Overview David Priestley Rolls-Royce International Ltd. November 2013 Global Education Dialogue - HCMC 2013 Rolls-Royce plc The information in this document is the property of Rolls-Royce
More informationTechnology and Manufacturing Readiness Levels [Draft]
MC-P-10-53 This paper provides a set of scales indicating the state of technological development of a technology and its readiness for manufacture, derived from similar scales in the military and aerospace
More informationRegional Space Health Information Sessions
Canadian Space Agency Regional Space Health Information Sessions Summary Report Held between October 11 and November 10, 2017 in Halifax, Montreal, Toronto, Calgary and Vancouver Summary From October 11
More informationDoD Research and Engineering Enterprise
DoD Research and Engineering Enterprise 18 th Annual National Defense Industrial Association Science & Emerging Technology Conference April 18, 2017 Mary J. Miller Acting Assistant Secretary of Defense
More informationThe Innovation Systems Research Network: An Experimental Design for Knowledge Management. David A. Wolfe, Ph.D.
The Innovation Systems Research Network: An Experimental Design for Knowledge Management David A. Wolfe, Ph.D. Royal Bank Chair in Public and Economic Policy Program on Globalization and Regional Innovation
More informationAUSTRALIAN SPACE SCIENCE AND INDUSTRY POLICY
AUSTRALIAN SPACE SCIENCE AND INDUSTRY POLICY Australian Space Science and Industry Agency & Space Industry Program A Shorten Labor Government will establish an Australian Space Science and Industry Agency
More informationTALENT AS CANADA S COMPARATIVE ADVANTAGE Digital Talent Strategy: Road to 2020 and Beyond Ottawa March 9 th Namir Anani President & CEO
TALENT AS CANADA S COMPARATIVE ADVANTAGE Digital Talent Strategy: Road to 2020 and Beyond Ottawa March 9 th 2016 Namir Anani President & CEO CONSULTATIONS & ACKNOWLEDGEMENT Canada wide targeted consultations
More informationTHE INNOVATION CHALLENGES IN THE AVIATION ENVIRONMENT Aarti Panday
THE INNOVATION CHALLENGES IN THE AVIATION ENVIRONMENT Aarti Panday Overview National System of Innovation TIA Mandate, Role, Themes The Aviation Landscape Innovation Challenges Where To From Here? 2 The
More informationClimate Change Innovation and Technology Framework 2017
Climate Change Innovation and Technology Framework 2017 Advancing Alberta s environmental performance and diversification through investments in innovation and technology Table of Contents 2 Message from
More informationGREATER MONTRÉAL Life Sciences & Health Tech hub
GREATER MONTRÉAL Life Sciences & Health Tech hub Christelle Fasano, PharmD Director, Business Development Life Sciences & Health Technologies Foreign Investments 2018 1 01 Life sciences: a strategic sector
More informationDigitizing European Industry
Digitizing European Industry Bern 31.10.2017 Cornelia Spycher, National Contact Point (NCP) for Nanotechnologies, Advanced Materials & Manufacturing & Processing (NMBP) Cornelia.Spycher@euresearch.ch +41
More informationDenmark as a digital frontrunner
Denmark as a digital frontrunner Recommendations for the government from the Digital Growth Panel May 2017 Digital Growth Panel Summary Vision: Denmark as a digital frontrunner Denmark and the rest of
More informationDefence and security engineering
Defence and security engineering 2018-2019 Symposia Symposia at Shrivenham provides a forum to Government agencies, military and civilian, industry and research establishments for the exploration and exchange
More informationINVEST IN PROFIT PERFORMANCE STABILITY PERFORMANCE INNOVATION DIVER IVERSITY STABILITY PROFIT PERF
PROFIT PERFORMANCE STABILITY ERFORMANCE INNOVATION DIVER INVEST IN DIVERSITY STABILITY PROFIT PERF NNOVATION PROFIT DIVERSITY STA STABILITY DIVERSITY INNOVATION CANADA S COMPETITIVE ADVANTAGES IVERSITY
More informationGreater Montréal: Connected globally for more collective wealth
Greater Montréal: Connected globally for more collective wealth Key facts of the study April 2018 To consult the full version, visit www.ccmm.ca/intlstudy Openness to the world: a source of prosperity
More informationQ INTRODUCTION VC ACTIVITY OVERVIEW. Summary of investment and fundraising. Deal size.
www.sme-fdi.gc.ca/vcmonitor INTRODUCTION This issue discusses venture capital (VC) investment and fundraising activity in Canada during the first quarter of 21. It also describes recent federal and provincial
More informationFuture UAS Software Procurement
Future UAS Software Procurement 28 th July 2016 Agenda 1. Background 2. The Question 3. Cost Assessment Approach 4. Benefits Assessment Approach 5. Results Background Abstract Assessing strategy for future
More informationEnabling ICT for. development
Enabling ICT for development Interview with Dr M-H Carolyn Nguyen, who explains why governments need to start thinking seriously about how to leverage ICT for their development goals, and why an appropriate
More informationProposing a European Partnership in HORIZON EUROPE
Proposing a European Partnership in HORIZON EUROPE Helmut Dosch Chair of LEAPS ICRI 2018-4 th International Conference on Research Infrastructures VIENNA, Austria Sep 12-14, 2018 Better Science for Europe
More informationAutomotive Sector What is our interest in CAV & ITS and Why? Nigel J Francis
Automotive Sector What is our interest in CAV & ITS and Why? Nigel J Francis State of Michigan Automotive Office April 2014 Vision We will leverage the strengths and assets of Michigan s automotive industry
More informationWE SPECIALIZE IN MILITARY PNT Research Education Engineering
Defense-Focused Autonomy & Navigation Anywhere, Anytime, Using Anything WE SPECIALIZE IN MILITARY PNT Research Education Engineering RESEARCH THRUST 1 RESEARCH THRUST 2 RESEARCH THRUST 3 Autonomous & Cooperative
More informationManufacturing Systems Engineering Key Expertise Theme. astutewales.com
Manufacturing Systems Engineering Key Expertise Theme astutewales.com Exploit Resources & Connectivity in the Manufacturing Process Improve quality, productivity and sustainability. The Whole Life Cycle
More informationCommission proposal for Horizon Europe. #HorizonEU THE NEXT EU RESEARCH & INNOVATION PROGRAMME ( )
Commission proposal for Horizon Europe THE NEXT EU RESEARCH & INNOVATION PROGRAMME (2021 2027) #HorizonEU Feilim O'Connor - DG ENER, Unit C.2 ETIP SNET Workshops 19/09/2018 Research and Innovation Commission
More informationBasque Country. RIS3 EUSKADI & ADVANCED MANUFACTURING STRATEGY Basque Industry 4.0
RIS3 EUSKADI & ADVANCED MANUFACTURING STRATEGY Basque Industry 4.0 MANUMIX INTERREG EUROPE 1 st Learning Journey Basque Country Amaia Martínez Muro Strategic Initiatives. SPRI Basque Business Development
More informationWorkshop on Enabling Technologies in CSF for EU Research and Innovation Funding
Workshop on Enabling Technologies in CSF for EU Research and Innovation Funding Rapporteur Professor Costas Kiparissides, Department of Chemical Engineering, Aristotle University of Thessaloniki Brussels,
More informationEXECUTIVE SUMMARY RESEARCH INTELLIGENCE DRIVING HEALTH SYSTEM TRANSFORMATION IN CANADA
Pan-Canadian Vision and Strategy for Health Services and Policy Research 2014 2019 EXECUTIVE SUMMARY RESEARCH INTELLIGENCE DRIVING HEALTH SYSTEM TRANSFORMATION IN CANADA Partners involved Alberta Cancer
More informationStrength through cooperation VDL ETG
Strength through cooperation VDL ETG VDL ETG VDL ENABLING TECHNOLOGIES GROUP IS A GLOBAL PROVIDER OF COMPLEX AND INNOVATIVE MECHATRONIC SYSTEMS. FOUNDED IN 1900 AS PHILIPS MACHINEFABRIEKEN, VDL ETG NOW
More information