RF module and Sensing Workshop Proposal. Tachlog Pvt. Ltd.

Transcription

1 RF module and Sensing Workshop Proposal Tachlog Pvt. Ltd.

2 ABOUT THIS DOCUMENT Purpose of this The Workshop proposal document, explains the syllabus, estimate, activity document and overview of the workshop on RF module And Sensing. Document IEEE Prepared for Date of publication 14/08/2017 Reference Number TLWP13 Page count 9

3 CONTENTS SL NO TOPIC PAGE NO 1 Introduction 4 2 Objectives and vision 6 3 Syllabus and Schedule 7 4 Technical requirements 9 5 Previous workshop history 10

4 1. INTRODUCTION Tachlog Pvt Ltd is an embedded systems company, Our current office premises in Thiruvananthapuram. We provide fast and reliable solutions to its clients in the field of electronics such as embedded. The firm delivers faster and reliable solutions to all its clients for both in services and prototypes as per their requirements. We concentrate on embedded systems development and design. Troncart.com is a new venture of Tachlog Pvt Ltd. Which is a reliable source of electronics and embedded related products.

5 ABOUT WORKSHOP Introduction to RF module and sensing Our workshop will focus on getting you up and running on Wireless communication & sending sensor data wirelessly. Students will get introduced to programming and interfacing microcontroller with various sensors, actuators, and Modules, at the end each team will design their own embedded system solution results different variety of product as workshop outcome. The duration of this workshop will be two consecutive days with eight hours session per day. The total of sixteen hours properly divided into theory and hand on practical sessions. This workshop targets Electronics/Electrical/Computer Science Engineering students and technology enthusiasts, and will have both theory and hands-on practical activities. Lead faculty for the program is Mr. Pratheesh Nair, CTO, Tachlog; having 7+ Years of Experience in Embedded programming and hardware design.

6 OBJECTIVE AND VISION The main objective of our workshop is to give an overview about how Arduino and Raspberry-Pi can be used in real world and in industrial applications. We have structured our workshop activities in such a way that students grow their interest in designing and programming, so that they could start hacking and building things on their own. Our aim is to build troubleshooting skills among students and make them familiar with the difficulties arising while implementing practical designs. Workshop Highlights : Wireless Remote Controlled Robot Various Sensor. Hands on with Robotic Platform.

7 SYLLABUS AND SCHEDULE Day - 1 Session 1 : Introduction Introduction to microcontrollers Introduction to Arduino Begin Arduino Programming; Blinky Introduction to Raspberry Pi, Raspbian SSH, FTP network setup Session 2 : Sensor and actuators interfacing Interfacing infrared (IR) and Ultrasound sensor Interfacing drives and motors DHT 11 temperature - humidity sensor Session 3 : Hands on; Tronbot Session 4 : RF communication and HT12 Introduction to IOT Different Wireless Technologies currently used Communication bands, ISM band HT12 Encoder and decoder RF transmission and reception using HT12 Day - 2 Session 1 : Bluetooth and Xbee module Interfacing HC-04 Bluetooth module

8 Robot control using bluetooth module Interfacing Xbee modules Session 2 : NRF and GSM modules Communicating real time data using NRF Using GSM module to send and receive messages Session 3 : Wi Fi modules Introduction to ESP8266 ESP8266 for IOT Session 4 : Conclusion

9 TECHNICAL REQUIREMENTS 1. Seminar Hall large enough to accommodate the participants easily OR A well-equipped Computer lab or sufficient laptops with Windows-XP or later versions installed. (We recommend 1 PC per student but at least 1 PC per group is mandatory) 2. Access to Power Supply 3. Projector, White-Board and other communicational and interactional resources. 4. Internet connectivity.

10 PREVIOUS WORKSHOP HISTORY We have conducted around 30 workshop for college students. Among that the notable ones are : Kerala IEEE Technical Exhibition and Symposium (KITES) 2016 Raspberry pi and PCB Design. FOSS Young Professional Meet on Free Software held at Technopark The FOSS Young Professionals Meet organized by International Centre for Free and Open Source Software (ICFOSS) was inaugurated by Prof. M S Rajasree, Director, and IIITM-K. The Meet has been organized as ICFOSS initiative to expose young professionals to the opportunities in FOSS and introduce them to emerging FOSS-based tools, technology and trends. Workshops on Advances in Open Source Robotics This workshop, targeted at students and open source robotics enthusiasts. Robotics and Automation is an area that is fast- emerging, with numerous applications in industrial, military, domestic and personal domains. Robots are machines that have specially-defined capabilities that make them fit for a purpose. Usually, this involves control mechanisms, sensors for feedback, and information modelling/processing that provides the specific behaviour of the robot.