PXI Modules 3070A PXI High Performance RF Digitizer Data Sheet
|
|
- Briana Ferguson
- 5 years ago
- Views:
Transcription
1 PXI Modules 3070A PXI High Performance RF Digitizer Data Sheet The most important thing we build is trust Continuous frequency range 250 MHz to 3 GHz or 6 GHz Input levels to +30 dbm with 1 db RF step attenuation to 51 db ADC Sample rate 400 MSa/s with 14 bit resolution 80 MHz or 160 MHz instantaneous bandwidth (-1 db) 2 Gbyte sample memory Fast frequency and level settling times <150 μs with List Mode operation Low SSB phase noise khz offset from 1 GHz Displayed Average Noise Level (DANL) of -160 dbm/hz Compact 3-slot wide x 3U PXI Hybrid slot compatible module Internal high stability OCXO 10 MHz frequency reference Supplied software - VISA pnp Driver - C /.NET for Windows 7/XP - PXI Studio with general purpose FFT spectrum analysis and options for Bluetooth BR/EDR/LE and WLAN IEEE a,b,g,n,p,ac Introduction 3070A is one of a series of 5th generation PXI 3000 modular RF instruments and the perfect complement to 3050A low noise RF signal generator. 3070A is a fully integrated high performance compact RF digitizer for use in RF ATE for test and measurement applications. Used with optional software measurement suites 3070A provides fast and high performance signal analysis. The 3070A module converts RF input signals over the frequency range 250 MHz to 6 GHz into phase and amplitude compensated digital I & Q sample data with an instantaneous signal bandwidth of up to 160 MHz and a sample memory depth of 2 GBytes (0.5 GSamples). The sample data is output for processing to the PC host via the PXI backplane.
2 Advanced Synthesizer Technology Internal frequency down conversion utilizes an advanced integrated low noise and highly agile multi-loop RF synthesizer achieving SSB phase noise of better than 127 dbc/hz at 20 khz offset from 1 GHz with frequency switching in under 150 μs making 3070A ideal for applications such as phase noise testing of narrow band transmitters and RF component testing. Level Range With a maximum input level of +30 dbm and a noise floor of -160 dbm/hz, 3070A is ideal for performing measurements of both large and small signal properties of RF transmitters. Input level control uses high speed electronic attenuator switching with a resolution of 1 db over a range 51 db to achieve optimal input conditions to the RF down converter and ADC as necessary for the measurement of interest. Noise and linearity optimized modes are provided to configure the module for specific measurement types. Fast Frequency and Level Settling Using 3070A List Mode, frequency settling to within 0.1 ppm and level settling to within 0.1 db is achieved in under 150 μs. List mode allows up to 64k different frequency settings to be pre-calculated and stored in on-board memory for fast access based on either software or hardware triggers. High Dynamic Range The 3070A is designed to deliver high dynamic range to satisfy the most demanding of measurements such as spectral emissions or burst power profile of TDD transmitters. Spectral emissions measurements of broadband systems provide a challenge to measurement systems. Using 3070A, ACLR measurement with a dynamic range of >65 db is achieved for 3G WCDMA UE devices. By utilizing the wide bandwidth of the 3070A RF digitizer, spectral mask measurement can be performed without need for spectral stitching. Residual EVM With a low residual EVM of better than 0.3% 3070A is able to accurately measure the modulation distortion performance of RF components and transmitters used for wideband communication such as IEEE ac. Low residual EVM is achieved by virtue of low phase noise and excellent IF amplitude and phase flatness in 3070A. Wide Bandwidth With an instantaneous -1 db bandwidth of up to 80 MHz or 160 MHz (option 05 enabled) 3070A is capable of supporting broadband wireless technologies such as ac and LTE advanced. Amplitude flatness of better than ±0.25 db is maintained across >67 MHz and ±0.5 db across >100 MHz (with option 05 fitted). Figure 1. PXI Studio2 analysis of WLAN ac MCS9 (160 MHz, 256 QAM) Local Oscillator I/O The provision of local oscillator input and output allows the 3070A to be the master oscillator in a chain of similar devices or slaved to an external LO source to provide phase coherent down conversion for use in MIMO or phased array antenna test applications. Flexible Hardware Triggering Hardware triggering is supported from across the PXI backplane or through the front panel. Hardware triggers can be used trigger acquisition directly or arm triggering from other sources such as counters. Trigger inputs can be used with list mode to step through different hardware settings.
3 SOFTWARE Module Driver A VXI PnP low level driver is supplied with C.dll, and.net programming interfaces for user application development. Applications PXI Studio2 is a Windows TM application that provides a framework for virtual instrument plug-ins with a graphical user interface to control 3070A as a standalone instrument or as part of a larger configuration of PXI 3000 Series RF modules. The RF Digitizer plug-in provides time domain, frequency domain and I vs. Q graphical displays of captured I & Q data. Personalities 3070A standard and optional measurement suites support analysis of specific communications systems or generic modulation types and spectral analysis. Each optional measurement suite includes a C style DLL and.net programming interface and a graphical user interface plug-in for use in PXI Studio2. General purpose FFT Spectrum analysis software is provided as standard. This software processes captured I & Q sample data and plots results in spectrum and time domains. The library also provides measurement results for band power, adjacent channel power and occupied bandwidth. Optional measurement software supports various radio communication standards option 103, WLAN a,b,g,n measurement suite and option 113, WLAN ac measurement suite provide a library of functions for characterizing the performance of WLAN signals in accordance with each of the respective IEEE standard requirements including support for SISO and MIMO and for ac VHT specific support is provided for 80 MHz, MHz and 160 MHz option 106, Bluetooth measurement suite provides a library of function to characterise Bluetooth BR, EDR and LE transceivers. Option 203 Connectivity Test Sequencing renders 3070A compatible for use with PXI Maestro for testing wireless connectivity devices in automated systems. For a full description of optional measurement suite functionality and performance see the latest PXI Studio2 data sheet.
4 SPECIFICATION Specifications apply when used in conjunction with the driver software supplied with the module or later version and with the input signal at the 3070A tuned frequency and reference level unless otherwise stated. All specifications apply when the module is used in a PXI standard compliant chassis operating within the allowed temperature range and following a warm up period of 30 minutes. Specifications apply when using 3070A internal LO unless otherwise stated. RF INPUT FREQUENCY Range 250 MHz to 3 GHz or 6 GHz with option 03 enabled Resolution 0.01 Hz Accuracy As per frequency reference Settling Time To within 0.1 ppm of final frequency, using internal LO and sample rate >2 MSa/s List Mode Software Triggered LO Position Frequency 3070A uses an internal or external LO to provide down conversion to an intermediate frequency Fif. The LO frequency may be set to either Fc+Fif or Fc-Fif according the Fc per the table below. Tuned Frequency Option 01 enabled <350 MHz <130 μs Option 01 disabled >350 MHz <130 μs 1 ms (typ.) 12 ms (typ.) LO Position W.R.T tuned frequency <350 MHz NA LO above 350 MHZ to <1450 MHz LO below with unspecified spurious response performance 1450 MHz to <5700 MHz LO above or LO below LO above or LO below. LEVEL Coupling AC coupled Max DC Input ±12V Max RF Input Power Auto Mode +30 dbm for reference level setting 0 dbm and above +24 dbm for reference level setting below 0 dbm Manual Mode Frequency at Input Maximum RF Input Power (Unpowered) +27 dbm, or 0 dbm for inputs <1 MHz Reference Level Range (for full scale) +30 dbm to -19 dbm in 1 db steps Level Accuracy (23 C ±5 C) <3 GHz <±0.8 db, typically ±0.3 db 3 GHz <±0.9 db, typically ±0.5 db Temperature Coefficient Typically db/ 0 deg C between 0 and 45 degrees Settling Time (internal LO, sample rate >2 MSa/s) To within 0.1 db of final settled value Level Repeatability Specified after warm up following a return from a change in frequency or level. Valid for at least 2 hours and excluding temperature influence. Typically ±0.07 db Input Impedance 50Ω List Mode Software Triggered RF Input VSWR Maximum Peak Input Power (dbm) Preamp off <130 μs Typically 12 ms Preamp on <1 MHz MHz 5 MHz +20 >5 MHz MHz to <5900 MHz 5900 MHz Maximum bandwidth is reduced to 90 MHz when LO above is selected LO below <1.5:1 (14 db return loss), typically 1.3:1 (17.7 db return loss) Linearity (typical) Relative level w.r.t ref level (db) Linearity Error (db) -10 to 0 < to -10 < to -40 <0.25
5 SPECTRAL PURITY Single Sideband (SSB) Phase Noise (typical) Excluding the effect of RF Digitizer noise floor Spurious Response Within the analysis bandwidth for a single CW input at the reference level. Front end mode Auto, Low Noise Optimized. Typically better than -70 dbc Spurious Sidebands (for offsets 10 khz to 10 MHz) Typically -70 dbc Residual Responses (RF input terminated into 50 Ω, reference level -25 dbm front end mode Auto, low noise optimized) Better than -100 dbm, typically -110 dbm LO Breakthrough at RF Input Typically <-50 dbm LOCAL OSCILLATOR OUTPUT Frequency A replica of the LO frequency is present when the RF Digitizer is tuned to a frequency >350 MHz The LO frequency will be offset from the tuned frequency by ±250 MHz Output Level (when enabled) +10 dbm ±2 db VSWR Typically <2:1 Maximum Reverse Power 15 dbm LOCAL OSCILLATOR INPUT 3070A can use an externally supplied LO. Frequency Range 100 MHz 6 GHz Input Level +7 dbm to +12 dbm VSWR Typically 2:1 Damage Level 15 dbm dbc/hz Offset Carrier 1 khz 20 khz 10 MHz Up to 500 MHz Up to 1 GHz Up to 2 GHz Up to 4 GHz Above 4 GHz LINEARITY AND NOISE 3070A can be optimized for low noise (minimum noise figure), low noise overload (for TDMA signal measurements) and low distortion (optimized for intermodulation). 3070A also supports three front end modes, Auto, Auto IF and Manual each providing different control methods for the RF attenuation, IF attenuation and RF pre-amplifier. Third Order Intermodulation Distortion (low distortion mode) Measured using 2 tones spaced at 0.5, 1.5 and 5 MHz each -6 db with respect to a reference level -26 dbm to +10 dbm Better than -65 dbc, typically -73 dbc Better than -65 dbc, typically -73 dbc Adjacent Channel Leakage Ratio (low noise mode selected and carrier frequency <3 GHz) 3GPP WCDMA (3GPP bands) ±5 MHz ±10 MHz Displayed Average Noise Level (DANL) Input terminated in 50 Ω, front end mode Auto Better than -155 dbm/hz, typically -160 dbm/hz Signal to Noise Ratio (SNR) and EVM for Wireless LAN Signals Low noise mode, Auto attenuation mode, Peak input at Ref level b GHz a/g/n 2-6 GHz n/ac 4-6 GHz Uplink (1 DPCH SF64) Downlink 64 channel (test model 1) Optimization Mode Ref Level DANL (dbm/hz) Low Noise Low Distortion Standard 20 MHz BW, 3 db crest 20 MHz BW, 8 db crest 40 MHz BW 10 db crest 80 MHz BW 14 db crest 160 MHz BW 14 db crest <-21 dbm <-155, typically dbm Ref Level <-25 dbm <-155, typically dbm Ref Level SNR (db) Input Level (dbm) Min >53-29 (-35 typical) >58-23 (-31 typical) >68 (typical) -3 >43-39 (-42 tyipcal) >49-23 (-33 typical) >58 (typical) -10 >48 (typical) -17 >55 (typical) -10 >43 (typical) -19 >50 (typical) -11 >43 (typical) -16 >50 (typical) -10 <-65 dbc typ -68 dbc <-60 dbc typ 65 dbc Max
6 g GHz a/n 4-6 GHz n/ac 4-6 GHz The residual EVM specification includes the residual error contribution from a 3050A RF Signal Generator. LIST MODE List Mode Channel Parameters Frequency (Hz), Reference level (dbm), LO position (above/below), Front End Mode, Auto mode Optimize, RF attenuator settings (db), IF attenuator settings (db), Pre-amp On/Off, Dwell period (samples) Number of List Addresses 0 to List Address Source Manual (software), External (counter or address), Internal (counter/timer) External Mode Trigger Sources PXI trigger bus, star trigger, PXI local bus (LBL6, front panel Trig A, B) Counter Mode Dwell Period 2 to 65,000,000 samples BANDWIDTH With option 05 disabled, the maximum bandwidth is limited to 80 MHz RF Bandwidth Flatness <±0.15 db <±0.25 db <±0.5 db <±1 db Frequency Standard 20 MHz BW, 3 db crest 20 MHz BW, 8 db crest 80 MHz BW, EVM (db) Input Level (dbm) Min < (-36 typical) 50 (typical) -30 < (-32 typical) 47 (typical) -30 <400 MHz >30 MHz >15 MHz >30 MHz <600 MHz >50 MHz <750 MHz >5 MHz >35 MHz >50 MHz >66 MHz Max +22 <37-34 (-35 typical) 11 db crest (typical) MHz BW 36 (typical) db crest ADC Resolution 14 bit ADC Sample Rate 400 MSa/s Resampled Data Rate (Fs) Range ksa/s to 200 MSa/s (complex IQ pairs) Sample Rate Accuracy As per frequency reference ±3 uhz Sample Resolution 16 or 32 bit for each of I and Q 32 bit resolution applies when Fs <100 MSa/s, auto resolution selected Sample Memory 2 Gbyte Capture Length 1 to 512 Msamples (16 bit each of I and Q) Msamples (32 bit each of I and Q) TRIGGERING Trigger Mode Single/Repeat Trigger Type Software / Edge Edge Trigger Sources Immediate (software) Internal (IF or IQ level trigger) External Front panel (Trigger A/B) PXT Trigger Bus PXI Star Trigger PXI Local Bus (LBL6) Edge Trigger Polarity +ve and -ve Front Panel Trigger A/B Input level TTL, Logic High >2V, Logic Low <0.8V <900 MHz >50 MHz >90 MHz >100 MHz Input Impedance approx., 10 kω <5700 MHz >5700 MHz (LO below) >5700 MHz (LO above) >10 MHz >67 MHz >100 MHz >160 MHz >50 MHz >90 MHz Output level TTL, Logic High 5V, Logic Low 0V Output impedance typ, 57Ω Trigger Delay (pre and post trigger) Capture length to 10 seconds Trigger Hold-off 0 to us Trigger Latency ±1 sample at the output sample rate
7 INTERNAL OXCO FREQUENCY REFERENCE Frequency 10 MHz Accuracy GENERAL INPUTS/OUTPUTS RF IN REF SMA (F) 50Ω SMA (F) x2 Aging rate per day <0.001 ppm Aging rate per year <0. 1 ppm Temperature Stability (0 to 50 C) Typically <±0.01 ppm Warm-up time <5 minutes Output Level 2 V pk-pk square wave into 50Ω Output Impedance 50Ω The reference output can be enabled/disabled by a software call EXTERNAL FREQUENCY REFERENCE Frequency 10 MHz ±100 Hz Input Impedance 50Ω or 100 kω, selectable in software External Reference Input Level 0.4 V to 4 V pk-pk LO In & Out Trigger A & B SMA (F) 50Ω SSMB (M) Front Panel LED Status Indicator Two colour, steady state, slow or fast flashing DIMENSIONS AND WEIGHT Dimensions 3-slot wide x 3U high PXI hybrid slot compatible module The left and centre occupied slots connect to the PXI backplane and both these slots are required to be PXI-1 or PXI hybrid compatible. Weight POWER 1.15 kg (2.54 lbs) Typical current consumption +3.3 V 5.3 A +5 V 5.5 A +12 V 0.7 A -12 V 0.4 A Dissipation 59 W GENERAL Warranty 2 years Recommended Calibration Interval 1 year RATED RANGE OF USE Temperature 0 to 45 degrees C, Meets IEC :2007 and :2007 Operating Humidity 10 to 90% non-condensing, meets IEC : 2001
8 CONDITIONS OF STORAGE AND TRANSPORT Storage Temperature -40 to +70 C, meets IEC :2007 and :2007 Storage Humidity 5 to 93% non-condensing, tested to IEC :2001 Shock 30 g peak, half sine, 9 ms pulse. Tested in accordance with IEC :2008 Random vibration 5 Hz to 500 Hz, 2.46 g rms non-operating. Tested in accordance with IEC :2008 Compliance PXI Hardware Specification Revision 2.2, ECN 1 Revision1.0 (Hybrid Slot-Compatible PXI-1 Peripheral Module. PXI Software Specification Revision 2.1 VXI plug & play specifications (VPP-2, VPP-3.x, VPP-4.x and VPP-7) Electromagnetic Compatibility EN , Emissions Class A, Immunity Table 1 performance criteria B Safety EN Safety requirements for electrical equipment for measurement, control and laboratory use-part 1, General requirements. Minimum System Controller Requirements Recommended minimum memory 2 Gbyte Operating System, Windows 2000, Windows XP, Windows 7 (32 bit)
9 VERSIONS, OPTIONS AND ACCESSORIES Ordering Numbers 3070A Option 01 Option 03 Option 05 Option 103 Option 106 Option 113 Option 203 Description PXI High Performance RF Digitizer High Speed Frequency Switching Frequency range extended to 6 GHz Instantaneous bandwidth extended to 160 MHz WLAN a,b,g,n measurement suite Bluetooth measurement suite WLAN ac measurement suite (requires option 113 and 03) Connectivity Test Sequencing (requires either option 103 or 106) Accessories: SSMB-SSMB cable 150 mm 23448/907 SMA-SMA link cable 180 mm 43139/739 SMA-SMA link cable 130 mm 43139/738 SMA-SMA link cable 240 mm 43139/783 PXI Slot block (pack of 5) 22361/159 SMA connector saver 46885/224 3 db SMA attenuator 23448/841 6 db SMA attenuator 23448/ W SMA termination Torque screw driver (1nM) 22961/500 8 mm crowfoot spanner 22961/501 For all measurement suite specification see PXI Studio data sheet All options are available to retrofit in the field with pass key activation using PXI Studio. Supplied with: CD ROM containing driver installation, PXI Studio 2 and FFT spectrum measurement suite Test result CD ROM with calibration certificate SMA-SMA link cable 43139/739
10
11
12 Cobham Wireless - Validation Part No.46900/012, Issue 4, 03/16
PXI Modules 3066 PXI Multi-Way Active RF Combiner Data Sheet
PXI Modules 3066 PXI Multi-Way Active RF Combiner Data Sheet The most important thing we build is trust 250 MHz to 6 GHz RF signal conditioning module for multi- UE, MIMO and Smartphone testing Four full
More informationPXI Modules Series RF Digitizers
PXI Modules 3030 Series RF Digitizers Fully featured wideband PXI RF digitizer module for complex signal analysis applications in communications system test Frequency ranges to 3 GHz or 6 GHz 36 MHz or
More informationPreliminary. PXI Modules Wideband RF Digitizer.
PXI Modules 3035 Wideband RF Digitizer Frequency range 330 MHz to 6 GHz 36 MHz wide digitized bandwidth 14 bit A/D resolution with 103.68 MHz sample rate 75 db spurious free dynamic range 75 db intermodulation
More informationPXI Modules. 3030A Wideband RF Digitizer.
PXI Modules 3030A Wideband RF Digitizer Fully featured wideband PXI RF Digitizer module for complex signal analysis applications in communications system test Frequency range 330 MHz to 3 GHz Wide 33 MHz
More informationPXI Modules PXI Digital RF Signal Generator.
PXI Modules 3020 PXI Digital RF Signal Generator Fully featured PXI Digital RF Signal Generator module for complex digital IQ waveform applications in communications system test Frequency range 250 MHz
More informationFull system level calibration (levels, s-parameters, noise) Full RF source and measure capability Applications Vector network analyzer capability
Semiconductor Test AXRF - Multi-Port PXI RF Subsystem Modulated Vector Source and Measurement Data Sheet The most important thing we build is trust Functionality High speed, reliable solid state design
More informationPXI Modules Series RF Digitizers
PXI Modules 3030 Series RF Digitizers Fully featured wideband PXI RF digitizer module for complex signal analysis applications in communications system test Frequency ranges to 3 GHz or 6 GHz Choose from
More informationData Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
More informationPXIe Contents SPECIFICATIONS. 14 GHz and 26.5 GHz Vector Signal Analyzer
SPECIFICATIONS PXIe-5668 14 GHz and 26.5 GHz Vector Signal Analyzer These specifications apply to the PXIe-5668 (14 GHz) Vector Signal Analyzer and the PXIe-5668 (26.5 GHz) Vector Signal Analyzer with
More informationPXI Modules PXI RF Digitizer.
PXI Modules 3030 PXI RF Digitizer Fully featured PXI RF Digitizer module for complex signal analysis applications in communications system test Frequency range 330 MHz to 3 GHz Wide 20 MHz digitized corrected
More informationSC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
More informationSC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
More informationPXI MICROWAVE LOCAL OSCILLATOR MODULE
The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn
More informationPXI WLAN Measurement Suite Data Sheet
PXI WLAN Measurement Suite Data Sheet The most important thing we build is trust Bench-top R&D and production ready ATE RF performance verification tools Multi device parallel testing for higher production
More informationReconfigurable 6 GHz Vector Signal Transceiver with I/Q Interface
SPECIFICATIONS PXIe-5645 Reconfigurable 6 GHz Vector Signal Transceiver with I/Q Interface Contents Definitions...2 Conditions... 3 Frequency...4 Frequency Settling Time... 4 Internal Frequency Reference...
More informationModel 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 15 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
More informationNI PXIe-5601 Specifications
NI PXIe-5601 Specifications RF Downconverter This document lists specifications for the NI PXIe-5601 RF downconverter (NI 5601). Use the NI 5601 with the NI PXIe-5622 IF digitizer and the NI PXI-5652 RF
More informationPXI LTE/LTE-A Downlink (FDD and TDD) Measurement Suite Data Sheet
PXI LTE/LTE-A Downlink (FDD and TDD) Measurement Suite Data Sheet The most important thing we build is trust Designed for the production test of the base station RF, tailored for the evolving small cell
More informationSC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
More informationSpectrum Analyzers 2680 Series Features & benefits
Data Sheet Features & benefits n Frequency range: 9 khz to 2.1 or 3.2 GHz n High Sensitivity -161 dbm/hz displayed average noise level (DANL) n Low phase noise of -98 dbc/hz @ 10 khz offset n Low level
More informationPXI Modules 3020 Series Digital RF Signal Generators Data Sheet
PXI Modules 3020 Series Digital RF Signal Generators Data Sheet The most important thing we build is trust Frequency ranges spanning 100 khz to 6 GHz Level ranges -120 dbm up to +17 dbm max. Level accuracy
More informationModel 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
More informationModel 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
More informationPXI UMTS Uplink Measurement Suite Data Sheet
PXI UMTS Uplink Measurement Suite Data Sheet The most important thing we build is trust A production ready ATE solution for RF alignment and performance verification Tx Max Output Power Frequency Error
More informationVST 6 GHz RF Vector Signal Transceiver (VST)
VST 6 GHz RF Vector Signal Transceiver (VST) 2016 Datasheet The most important thing we build is trust Key features Vector signal analyser and generator in a single 3U x 3 slot wide PXIe module 65 MHz
More informationModel 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
More informationNI PXIe-5663 Specifications
NI PXIe-5663 Specifications 6.6 GHz RF Vector Signal Analyzer with Digital Downconversion This document lists specifications for the NI PXIe-5663 RF vector signal analyzer (NI 5663). The NI 5663 comprises
More informationDSA700 Series Spectrum Analyzer
DSA700 Series Spectrum Analyzer Product Features: All-Digital IF Technology Frequency Range from 100 khz up to 1 GHz Min. -155 dbm Displayed Average Noise Level (Typ.) Min.
More informationPXI LTE FDD and LTE TDD Measurement Suites Data Sheet
PXI LTE FDD and LTE TDD Measurement Suites Data Sheet The most important thing we build is trust A production ready ATE solution for RF alignment and performance verification UE Tx output power Transmit
More informationVIAVI VST. Data Sheet. 6 GHz RF Vector Signal Transceiver (VST)
Data Sheet VIAVI 6 GHz RF Vector Signal Transceiver () VIAVI Solutions The Vector Signal Transceiver () is an essential building block in RF communications test solutions supplied by VIAVI Solutions. Overview
More informationChapter 5 Specifications
RIGOL Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 to 50 temperature and is warmed up for 40 minutes.
More information3250 Series Spectrum Analyzer
The most important thing we build is trust ADVANCED ELECTRONIC SOLUTIONS AVIATION SERVICES COMMUNICATIONS AND CONNECTIVITY MISSION SYSTEMS 3250 Series Spectrum Analyzer > Agenda Introduction
More informationSpectrum Analyzer R&S FS300
Spectrum Analyzer R&S FS300 9 khz to 3 GHz The new product family from Rohde & Schwarz Professional test equipment for laboratory, service and production The R&S FS300 is a highly accurate spectrum analyzer
More informationIQgig-IF TM Technical Specifications
TECHNICAL SPECIFICATIONS IQgig-IF TM Technical Specifications 2018 LitePoint, A Teradyne Company. All rights reserved. Port Descriptions IQgig-IF Front Panel I/O Function Type Power Switch Power On/Off
More informationPXI. TD-SCDMA Measurement Suite Data Sheet. The most important thing we build is trust. Total Average Power plus Midamble / Data Power
PXI TD-SCDMA Measurement Suite Data Sheet The most important thing we build is trust Total Average Power plus Midamble / Data Power Transmit On/Off Time Mask Transmit Closed Loop Power Control (CLPC) Spectrum
More informationModel 745 Series. Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation since Model 845-M Specification 1.8 BNC
Specification 1.8 Model 745 Series 0.01-20.0 GHz Low Phase Noise Synthesizer 250 fs Digital Delay Generator Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation since 1963 Introduction The
More information2026Q CDMA/GSM Interferer MultiSource Generator
Signal Sources 2026Q CDMA/GSM Interferer MultiSource Generator The 2026Q is designed to work with a radio test set to provide a fully integrated radio receiver test solution for cellular and PCS systems
More informationDEVICE SPECIFICATIONS Phase Matrix PXI GHz PXI Vector Signal Analyzer
DEVICE SPECIFICATIONS Phase Matrix PXI-470 26.5 GHz PXI Vector Signal Analyzer This document lists specifications for the Phase Matrix PXI-470 26.5 GHz vector signal analyzer (VSA). The PXI-470 26.5 GHz
More informationModel 855 RF / Microwave Signal Generator
Features Very low phase noise Fast switching Phase coherent switching option 2 to 8 phase coherent outputs USB, LAN, GPIB interfaces Applications Radar simulation Quantum computing High volume automated
More informationPXIe Contents CALIBRATION PROCEDURE. Reconfigurable 6 GHz RF Vector Signal Transceiver with 200 MHz Bandwidth
IBRATION PROCEDURE PXIe-5646 Reconfigurable 6 GHz Vector Signal Transceiver with 200 MHz Bandwidth This document contains the verification and adjustment procedures for the PXIe-5646 vector signal transceiver.
More informationAgilent N9320B RF Spectrum Analyzer
Agilent N9320B RF Spectrum Analyzer 9 khz to 3.0 GHz Data Sheet Definitions and Conditions The spectrum analyzer will meet its specifications when: It is within its calibration cycle It has been turned
More informationModel 745 Series. Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation since Model 845-HP Datasheet BNC
Model 845-HP Datasheet Model 745 Series Portable 20+ GHz Microwave Signal Generator High Power +23dBM Power Output 250 fs Digital Delay Generator BNC Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation
More informationDSA800. No.1 RIGOL TECHNOLOGIES, INC.
No.1 DSA800 9 khz to 1.5 GHz Frequency Range Typical -135 dbm Displayed Average Noise Level (DANL) -80 dbc/hz @10 khz offset Phase Noise Total Amplitude Uncertainty
More information2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator
Signal Sources 2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator Up to three fully functional signal generators in one unit offering a unique solution for complex tests on receivers, components and
More informationChapter 6 Specifications
RIGOL This chapter describes the specifications of RF signal generator. Specifications are valid under the following conditions: the instrument in the calibration cycle is stored at least two hours at
More informationSignal Sources. 2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator.
Signal Sources 2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator Up to three fully functional signal generators in one unit offering a unique solution for complex tests on receivers, components and
More informationPXI WiMAX Measurement Suite Data Sheet
PXI WiMAX Measurement Suite Data Sheet The most important thing we build is trust Transmit power Spectral mask Occupied bandwidth EVM (all, data only, pilots only) Frequency error Gain imbalance, Skew
More informationChapter 6 Specifications
RIGOL This chapter lists the technical specifications and general specifications of the RF signal generator. The technical specifications are valid when the instrument is within the calibration period,
More informationKeysight Technologies N9320B RF Spectrum Analyzer
Keysight Technologies N9320B RF Spectrum Analyzer 9 khz to 3.0 GHz Data Sheet Definitions and Conditions The spectrum analyzer will meet its specifications when: It is within its calibration cycle It has
More information22 Marzo 2012 IFEMA, Madrid spain.ni.com/nidays.
22 Marzo 2012 IFEMA, Madrid spain.ni.com/nidays www.infoplc.net The Art of Benchmarking Speed PXI Versus Rack-and-Stack Test Equipment Filippo Persia Systems Engineer Automated Test Mediterranean Region
More informationN5194A and N5192A. UXG Agile Vector Adapter 50 MHz to 20 GHz DATA SHEET
N5194A and N5192A UXG Agile Vector Adapter 50 MHz to 20 GHz DATA SHEET Table of Contents Definitions and Conditions... 03 Specifications... 04 Frequency... 04 Amplitude... 05 Switching speed... 04 Synchronization...07
More informationPreliminary. PXI PRELIMINARY 3041 Small Cell RF Tester Data Sheet. The most important thing we build is trust. Test up to 4 small cells in parallel
PXI PRELIMINARY 3041 Small Cell RF Tester Data Sheet The most important thing we build is trust Turnkey production ATE solution for testing Small Cell base stations Automated Tx and Rx RF alignment and
More informationLNS ultra low phase noise Synthesizer 8 MHz to 18 GHz
LNS ultra low phase noise Synthesizer 8 MHz to 18 GHz Datasheet The LNS is an easy to use 18 GHz synthesizer that exhibits outstanding phase noise and jitter performance in a 3U rack mountable chassis.
More informationSIGNAL GENERATORS. MG3633A 10 khz to 2700 MHz SYNTHESIZED SIGNAL GENERATOR GPIB
SYNTHESIZED SIGNAL GENERATOR MG3633A GPIB For Evaluating of Quasi-Microwaves and Measuring High-Performance Receivers The MG3633A has excellent resolution, switching speed, signal purity, and a high output
More informationModel 7000 Series Phase Noise Test System
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Model 7000 Series Phase Noise Test System Fully Integrated System Cross-Correlation Signal Analysis to 26.5 GHz Additive
More informationSpecification RIGOL. 6 Specification
Specification RIGOL 6 Specification This chapter lists the specifications and general specifications of the analyzer. All the specifications are guaranteed when the following conditions are met unless
More informationIQgig-RF TM Model B Technical Specifications
TECHNICAL SPECIFICATIONS IQgig-RF TM Model B Technical Specifications 2018 LitePoint, A Teradyne Company. All rights reserved. Port Descriptions IQgig-RF Test Controller Front Panel I/O Function Type Power
More informationReconfigurable 6 GHz RF Vector Signal Transceiver with 1 GHz Bandwidth
CALIBRATION PROCEDURE PXIe-5840 Reconfigurable 6 GHz RF Vector Signal Transceiver with 1 GHz Bandwidth This document contains the verification procedures for the PXIe-5840 vector signal transceiver. Refer
More informationAPPH6040B / APPH20G-B Specification V2.0
APPH6040B / APPH20G-B Specification V2.0 (July 2014, Serial XXX-XX33XXXXX-XXXX or higher) A fully integrated high-performance cross-correlation signal source analyzer for to 7 or 26 GHz 1 Introduction
More informationPXI. cdma2000/ev-do Measurement Suite Data Sheet. The most important thing we build is trust. cdma2000 RC1 to RC4 reverse link analysis
PXI cdma2000/ev-do Measurement Suite Data Sheet The most important thing we build is trust cdma2000 RC1 to RC4 reverse link analysis 1xEV-DO rev 0, rev A and rev B (No Feedback Multiplexing mode) reverse
More informationIQxel TM Next Generation Connectivity Test System
TECHNICAL SPECIFICATIONS IQxel TM Next Generation Connectivity Test System 2017 LitePoint, A Teradyne Company. All rights reserved. General Technical Specifications RF Analyzer Parameter Ports Value Input
More informationAgilent E4428C ESG Analog Signal Generator
Migrate to the new Agilent MXG X-Series signal generator and generate true performance The new MXG exceeds the ESG s performance in every category - output power, phase noise, spurious, and low frequency
More informationContents. CALIBRATION PROCEDURE NI PXIe GHz and 14 GHz RF Vector Signal Analyzer
CALIBRATION PROCEDURE NI PXIe-5665 3.6 GHz and 14 GHz RF Vector Signal Analyzer This document contains the verification procedures for the National Instruments PXIe-5665 (NI 5665) RF vector signal analyzer
More informationSignal Sources. 2026Q CDMA Interferer Multisource Generator. Advanced Test Equipment Rentals ATEC (2832)
Signal Sources Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) 2026Q CDMA Interferer Multisource Generator The 2026Q is designed to work with a radio test set to provide
More informationRF Semiconductor Test AXRF-Q Multi-Port PXI RF Sub-System
RF Semiconductor Test AXRF-Q Multi-Port PXI RF Sub-System Datasheet The most important thing we build is trust Overview AXRF-Q Multi-Port PXIe RF Subsystem is an integrated solution for testing RF semi-conductor
More informationNI PXI-4461 Specifications
NI PXI-446 Specifications Analog Input Input Characteristics This document lists specifications for the NI PXI-446 Dynamic Signal Acquisition (DSA) device. These specifications are typical at 5 C unless
More informationRacal Instruments. Product Information
Racal Instruments 6084A-104-DMM 1 GHz Digitizer and 7.5 Digit Digital Multimeter The Digitizer/DMM increases test system performance and density by packaging a 7.5 digit Digital Multimeter (DMM) together
More informationDSA800 RIGOL TECHNOLOGIES, INC.
DSA800 All-Digital IF Technology 9 khz - 1.5 GHz Frequency Range Up to -135dBm Displayed Average Noise Level (DANL) -80dBc/Hz @ 10kHz Oset Phase Noise Total Amplitude Uncertainty < 1.5dB 100Hz Minimum
More informationGA GHz. Digital Spectrum Analyzer
Digital Spectrum Analyzer GA4063 3GHz Professional Performance Robust Measurement features High frequency stability Easy- to-use User Interface Compact size, Light weight, Portable design www.attenelectronics.com
More informationAgilent 8657A/8657B Signal Generators
Agilent / Signal Generators Profile Spectral performance for general-purpose test Overview The Agilent Technologies and signal generators are designed to test AM, FM, and pulsed receivers as well as components.
More informationRF Signal Generator SM300
RF Signal Generator SM300 9 khz to 3 GHz With compliments Helmut Singer Elektronik www.helmut-singer.de info@helmut-singer.de fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany
More informationVXIbus Local Oscillator
20309 Phase Matrix, Inc ṬM Instruments You Can Count On VXIbus Local Oscillator High-Performance Microwave Local Oscillator Generation for VXIbus Systems 3 to 9 GHz Frequency Range Multi-Stage Downconversion
More informationAdvances in RF and Microwave Measurement Technology
1 Advances in RF and Microwave Measurement Technology Chi Xu Certified LabVIEW Architect Certified TestStand Architect New Demands in Modern RF and Microwave Test In semiconductor and wireless, technologies
More informationTRANSCOM Manufacturing & Education
www.transcomwireless.com 1 G6 Vector Signal Generator Overview G6 Vector Signal Generator is a high performance vector signal generator. It can generate arbitrary wave signal, continuous wave signal, common
More informationR&S FSWP Phase Noise Analyzer Specifications
R&S FSWP Phase Noise Analyzer Specifications Data Sheet Version 06.00 CONTENTS Definitions... 4 Specifications... 5 Frequency... 5 Phase noise measurements... 5 Phase noise sensitivity with R&S FSWP-B61
More informationR3477. Ideal for mobile communication applications including base stations and handsets, from the development stage to production and installation
R3477 Signal Analyzers Ideal for mobile communication applications including base stations and handsets, from the development stage to production and installation Frequency range: 9 khz to 13.5 GHz World
More informationR&S SMB100N SIGNAL GENERATOR
R&S SMB100N SIGNAL GENERATOR PERFORMANCE SPECIFICATIONS VERSION 02.00, SEPTEMBER 2009 CONTENTS Specifications...3 Definitions... 3 RF performance... 4 Frequency... 4 Frequency sweep... 4 Reference frequency...
More informationDS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
More informationMG3740A Analog Signal Generator. 100 khz to 2.7 GHz 100 khz to 4.0 GHz 100 khz to 6.0 GHz
Data Sheet MG3740A Analog Signal Generator 100 khz to 2.7 GHz 100 khz to 4.0 GHz 100 khz to 6.0 GHz Contents Definitions, Conditions of Specifications... 3 Frequency... 4 Output Level... 5 ATT Hold...
More informationUnderstanding RF and Microwave Analysis Basics
Understanding RF and Microwave Analysis Basics Kimberly Cassacia Product Line Brand Manager Keysight Technologies Agenda µw Analysis Basics Page 2 RF Signal Analyzer Overview & Basic Settings Overview
More informationIQxel-M8 TM Multi-DUT Connectivity Test System
TECHNICAL SPECIFICATIONS IQxel-M8 TM Multi-DUT Connectivity Test System 2017 LitePoint, A Teradyne Company. All rights reserved. Overview of IQxel-M8 The IQxel-M8 is a manufacturing oriented, Multi-DUT
More informationWaveStation Function/Arbitrary Waveform Generators
WaveStation Function/Arbitrary Waveform Generators Key Features High performance with 14-bit, 125 MS/s and 16 kpts 2 channels on all models Large 3.5 color display for easy waveform preview Over 40 built-in
More informationR&S CMW100 Communications Manufacturing Test Set Specifications
R&S CMW100 Communications Manufacturing Test Set Specifications Data Sheet Version 02.00 CONTENTS Definitions... 6 General technical specifications... 7 RF generator... 8 Modulation source: arbitrary waveform
More informationIQxel-M8W TM Multi-DUT Connectivity Test System
TECHNICAL SPECIFICATIONS IQxel-M8W TM Multi-DUT Connectivity Test System 2018 LitePoint, A Teradyne Company. All rights reserved. General Technical Specifications RF Analyzer Parameter Ports (A/B) Value
More informationHMC-T2220B. Portable & Battery Operated! Portable Synthesized Signal Generator, 10 MHz to 20 GHz. Instrumentation Product Support at
Portable, 10 MHz to 20 GHz Portable & Battery Operated! 78-250-3343 tel 78-250-3373 fax Battery Operated 20 GHz Signal Generator! The is a battery powered, portable test equipment solution designed to
More informationSpectrum Analyzer. Distribution in the UK & Ireland
DSA800 Series Spectrum Analyzer All-Digital IF Technology Frequency Range from 9 khz up to 7.5 GHz Min. -161dBm Displayed Average Noise Level (Typ.) Min. < -98dBc/Hz @ 10kHz Offset Phase Noise Level Measurement
More informationIQxel-M8 TM Multi-DUT Connectivity Test System
TECHNICAL SPECIFICATIONS IQxel-M8 TM Multi-DUT Connectivity Test System 2015 LitePoint, A Teradyne Company. All rights reserved. Overview of IQxel-M8 The IQxel-M8 is a manufacturing oriented, Multi-DUTtest
More informationHMC-T2240. Synthesized Signal Generator, 10 MHz to 40 GHz
Synthesized Signal Generator, 10 MHz to 40 GHz , 10 MHz to 40 GHz Wide Range, 10 MHz to 40 GHz Signal Generator! The is an easy to implement test equipment solution designed to fulfill your signal generation
More informationPXIe Contents SPECIFICATIONS. 250 khz to 20 GHz RF Analog Signal Generator
SPECIFICATIONS PXIe-5654 250 khz to 20 GHz RF Analog Signal Generator These specifications apply to the PXIe-5654 RF Analog Signal Generator with up to 10 GHz or 20 GHz frequency and the PXIe-5696 Amplitude
More informationWaveStation Function/Arbitrary Waveform Generators
Function/Arbitrary Waveform Generators Key Features High performance with 14-bit waveform generation, up to 500 MS/s sample rate and up to 512 kpts memory 2 channels on all models Large color display for
More informationLitePoint IQxstream-M
TECHNICAL SPECIFICATIONS LitePoint IQxstream-M 2017 LitePoint, A Teradyne Company. All rights reserved. IQxstream-M is a manufacturing-oriented, multi-device, physical layer communication system tester,
More informationkhz to 2.9 GHz Spectrum Analyzer
Spectrum Analyzers 2399 9 khz to 2.9 GHz Spectrum Analyzer A spectrum analyzer with outstanding performance and a user friendly visual interface simplifying many complex measurements. 9 khz to 2.9 GHz
More informationSpectrum Analyzers. 2394A 1 khz to 13.2 GHz Spectrum Analyzer.
Spectrum Analyzers 2394A 1 khz to 13.2 GHz Spectrum Analyzer A spectrum analyzer with outstanding performance and a user friendly visual interface simplifying many complex measurements 1 khz to 13.2 GHz
More information2400C Series Microwave Signal Generators 10 MHz to 40 GHz. Preliminary Technical Datasheet. Low Phase Noise and Fast-Switching Speed in a Single Unit
Preliminary Technical Datasheet 2400C Series Microwave Signal Generators 10 MHz to 40 GHz Low Phase Noise and Fast-Switching Speed in a Single Unit 2400C Series Microwave Signal Generator Signal Generator
More informationSpectrum Analyzers U3771/3772. Handling frequencies of up to 43 GHz!! Our new microwave spectrum analyzer, ideal for field use, is now available.
Spectrum Analyzers U3771/3772 Handling frequencies of up to 43 GHz!! Our new microwave spectrum analyzer, ideal for field use, is now available. A New Standard for Microwave and Millimeter-wave Spectrum
More informationR&S CMW100 Communications Manufacturing Test Set Specifications
R&S CMW100 Communications Manufacturing Test Set Specifications R&S CMW100 model.k06 Data Sheet Version 03.00 CONTENTS Definitions... 4 General technical specifications... 5 RF generator... 6 RF analyzer...
More informationSignal Sources. 2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator
Signal Sources 2026A/B 10 khz to 2.05/2.51 GHz MultiSource Generator Up to three fully functional signal generators in one unit offering a unique solution for complex tests on receivers, components and
More informationDSA800. No.2 RIGOL TECHNOLOGIES, INC. All-Digital IF Technology 9 khz GHz Frequency Range
No.2 DSA800 All-Digital IF Technology 9 khz - 1.5 GHz Frequency Range Up to -135dBm Displayed Average Noise Level (DANL) -80dBc/Hz @ 10kHz Oset Phase Noise Total Amplitude Uncertainty < 1.5dB 100Hz Minimum
More informationBerkeley Nucleonics Test, Measurement and Nuclear Instrumentation since 1963
Model 845 Specification 2.54 (Sep 2017) Portable 12, 20, & 26.5 GHz Microwave Signal Generator with options HP, PE, R, LN, FS & LO BNC Berkeley Nucleonics Test, Measurement and Nuclear Instrumentation
More informationIdeal for high dynamic range measurements from compression to noise floor
USB/Ethernet Very Wideband Synthesized Signal Generator 5Ω -75 dbm to +14 dbm, 25 khz - 64 MHz The Big Deal Cost effective production test solution Power level resolution of.1 db Frequency resolution under.1
More information