CM1-VA ECNOMIC VOLT/CURRENT Meter
|
|
- Suzan Grant
- 5 years ago
- Views:
Transcription
1 SM-321S CM1-VA ECNOMIC VOLT/CURRENT Meter DESCRIPTION CM1 series Indicator has been designed in simple function and 4 digital 20.0mm LED displays with economic cost. They are can be programmed by tack switches that are hidden in backside of front bezel. They are also available 1 option of 2 Relay outputs, 1 Analogue output or 1 RS485(Modbus RTU Mode) interface with versatile functions such as control, alarm, re-transmission or communication for a wide range of industrial applications. FEATURE Measuring AC / DC Voltage 0~50.00mV/~600.0V / Current 0~1.999mA/~10.00A Optional output available for one of 2 relay, analogue or RS485 CE Approved & RoHS APPLICATIONS Testing Equipments for Volt/Current Measuring, MCC panel, Machinery, Switch gear... for Voltage or Current Measuring ORDERING INFORMATION CM1 VA DC/AC Input Optional Signal Output OPTION 1 Aux. Powered CODE VOLT INPUT CODE CURRENT INPUT CODE OPTION OUTPUT CODE AXU. POWER D DC measuring D DC measuring N None A AC 115/230V A AC measuring A AC measuring A2 AC 230V R2 2 Relay T TRMS measuring T TRMS measuring V1 0 ~ mv A2 0 ~ ma A/O: (0)4~20mA I V2 0 ~ V A3 0 ~ ma 0~10mA V3 0 ~ V A4 0 ~ ma A/O: 0~10V V V4 0 ~ V A5 0 ~ A (0)1~5V V5 0 ~ V A6 0 ~ A 8 RS485(Modbus RTU) V6 0 ~ V A7 0 ~ 5.00 A Relay, Analogue Output or VA 0~50 mv A8 0 ~ A RS485 Port can be VB 0~60 mv AO Specify A input selected one only VC 0~100 mv VO Specify V input Reading Stable Function TECHNICAL SPECIFICATION Average: avg Settable range: 1~99 s Input Range Moving average: Mavg Settable range: 1~99 s Measuring Range DC / AC Input Impedance Measuring Range DC / AC Input Impedance Digital filter: Dfilt Settable range: 1~99 s Voltage 0~50/~100 mv 5M ohm Current 0~1.999 ma 100 ohm Control Functions(option) 0~199.9 mv 5M ohm 0~19.99 ma 10 ohm Set-points: Two set-point 0~1.999 V 1M ohm 0~199.9 ma 1 ohm Control relay: 2 Relay, FORM-C, 5A/230Vac, 10A/115V 0~19.99 V 1M ohm 0~1.999 A 0.05 ohm Relay energized mode: Energized levels compare with set-points: 0~199.9 V 1M ohm 0~5.000 A 0.02 ohm Hi / Lo / Hi.HLd / Lo.HLd programmable 0~300.0 V 2M ohm 0~10.00 A 0.01 ohm Energizing functions: Start delay / Energized & De-energized delay / Hysteresis 0~600.0 V 2M ohm Energized Latch Start band(minimum level for Energizing): 0~9999counts Calibration: Digital calibration by front key Start delay : 0:00.0~9(Minutes):59.9(Second) A/D converter: 12 bits resolution Energized delay : ~9(Minutes):59.9(Second) Accuracy: DC: ± 0.1% of FS 1C De-energized delay : ~9(Minutes):59.9(Second) AC: ± 0.2% of FS 1C Hysteresis: 0~5000 counts Sampling rate: 15 cycles/sec Response : 100 msec.(when the AvG = 1 ) in standard Analogue output(option) Accuracy: 0.2% of F.S. ; 12 bits DA converter Display & Functions Ripple: 0.1% of F.S. LED: Numeric: 4 digits, 0.8 (20.0mm) red high-brightness LED Response : 100 msec. (10~90% of input) Display range: Isolation: AC 2.0 KV between input and output Scaling function: losc: Low Scale; Settable range: Output range: Specify either Voltage or Current output in ordering hisc: High Scale; Settable range: Voltage: 0~5V / 0~10V / 1~5V programmable Decimal point: Programmable from 0 / )0 / / 0 Current: 0~10mA / 0~20mA / 4~20mA programmable Over range Indication: ovfl, when input is over 110% of input range Hi Output capability: Voltage: 0~10V: 1000Ω; Under range indication: -ovfl, when input is under -0% of input range Lo Current: 4(0)~20mA: 600Ω max Max / Mini recording: Maximum and Minimum value storage during power on. Functions: aohs(output range high): Settable range: -1999~9999 Low cut: locut: Settable range: -1999~9999 counts aols(output range Low): Settable range: -1999~9999 Digital fine adjust: aozro: Settable range: -1999~9999 aospn: Settable range: -1999~9999 A-05-1/6 CS1-VA CM1-VA
2 CM1-VA CS1-VA RS 485 Communication(option) Protocol: Modbus RTU mode Baud rate: 1200/2400/4800/9600/19200/38400 programmable Data bits: 8 bits Parity: Even, odd or none (with 1 or 2 stop bit) programmable Address: 1 ~ 255 programmable Distance: 1200M Terminate resistor: 150Ω at last unit. Power Power supply: Power consumption: Back up memory: AC115/230V±15%,50/60Hz; 3.0VA maximum By EEPROM Electrical Safety Dielectric strength: AC 2.0 KV for 1 min, Between Power / Input / Output / Case Insulation resistance: 100M ohm at 500Vdc, Between Power / Input / Output Isolation: Between Power / Input / Relay, Analogue or RS485 EMC: EN 55011:2002; EN 61326:2003 Safety(LVD): EN :2001 Environmental Operating temp.: Operating humidity: Temp. coefficient: Storage temp.: Enclosure: Mechanical Dimensions: Panel cutout: Case material: Mounting: Terminal block: Weight: DIMENSIONS Front View ~60 C 20~95 %RH, Non-condensing 100 PPM/ C -10~70 C Front panel: IEC 529 (IP52); Housing: IP20 96mm(W) x 48mm(H) x 72mm(D) 93mm(W) x 45mm(H) ABS fire-resistance (UL 94V-0) Panel flush mounting Plastic NYLON 66 (UL 94V-0) 20A/300Vac, M3.5, 22~12AWG 310g CONNECTION DIAGRAM Terminal blocks: 20A/300Vac, M3.5, 1.3~3.5mm 2 (22~12AWG) SIGNAL INPUT 3 Power and Input AC115V AC230V AUX. POWER Optional output terminal block Power & input terminal block Please check the voltage of power supplied first, and then connect to the specified terminals. It is recommended that power supplied to the meter be protected by a fuse or circuit breaker. Power Supply L N G Filter or Transformer CM1-VA Input connection 1A Fuse AC115/230V L N G Maxi. Input: 600V or 10A CT Current Shunt Remark: PT can not short in secondary. CT can not open in secondary. Output ( one output available of Relay, Analogue or RS485 ) Relay output RELAY 1 RELAY 2 b c a b c a Analogue output RS485 port Panel Cut out Dimension: 96mm x 48mm x 72mm Panel Cut out: 93mm x 45mm Unit: mm INSTALLATION The meter should be installed in a location that dose not exceed the maximum operating temperature and provides good air circulation. PANEL CUT-OUT: (W) x (H) mm Kg/cn 1.0~8.0mm FIX HOLDER: 63 mm(l) / W M A B FUNCTION DESCRIPTION Max. Distance: 1200M Terminate Resistor (at latest unit): 120~300ohm/0.25W (typical: 150ohm) Scaling function: Setting the [ losc] (Low scale) and [ hisc] (High scale) in [input ] to relative input signal. Reverse scaling will be done too. Please refer to the figure as below, SCALE [ hisc] 19(99 [ hisc] 10 [ losc] 5 [ losc] Default: [ losc]:, [ hisc]: 10 Change to [ losc]: 5, [ hisc]: 19(99 Reverse slop INPUT % 5 % 10 % *Too narrow scale may course display lower resolution. A-05-2/6
3 Display & Functions Start band rysb (Fig.2-): Settable range from 0~9999 Counts Max / Mini recording: The meter will storage the maximum and minimum value in Start delay rysd (Fig.2-): Settable range from 0.0(s)~9(m)59.9(s); [ user level] during power on in order to review drifting Start Delay Fig.2 of PV. Reset for Max(Mini) Hold Mrst: Inhibit Inhibit The maximum and minimum recording can be reset by [ry_.sp] Hi Setting Mrst in [ user level]. [ rysb] Start Band Low cut: If the setting value is positive, it means when the absolutely value of PV Relay Energized Start Delay Time Setting value, the display will be the setting of [ losc]. If the setting [ rysd] value is negative, it means when the PV under setting value (PV ON -Setting value), the display will be setting value of [locut]. Hysteresis ry_.hy (Fig.3-): Settable range from 0~5000 Counts Low Cut set to be Low Cut set to be Present Value PV according to input signal Low cut function Low Cut is set for 0.50, if the PV is from -0.50~ +0.50, that display will be the setting of [ losc]. Low cut function Present Value PV according to input signal Low Cut is set for -0.10, if the PV is under (< = -0.10), that display will be Reading Stable Function Average: Basically, the sampling rate of meter is 15cycles/sec. If the function set to be 3 s, It means the meter will update of display will be 5 s/sec. Average set to be 3 Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Sample 6.. Display Update Value = (Sample 1 + Sample 2 + Sample 3)/3 Display Update Value = (Sample 4 + Sample 5 + Sample 6)/3 Remark: The higher average setting will cause the response of Relay and Analogue output slower. Moving average: If the function to be set 3 s, the meter will update delay in first 3 samples, then it will update 15 s/sec continuously. Moving Average set to be 3 Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Sample 6. In first 3 samples, Display Update Value = (Sample 1 + Sample 2 + Sample 3)/3 Display Update Value = (Sample 2 + Sample 3 + Sample 4)/3. Display Update Value = (Sample 3 + Sample 4 + Sample 5)/3 Display Update Value = (Sample 4 + Sample 5 + Sample 6)/3 Remark: The higher moving average setting wouldn t cause the response of Relay and Analogue output slower after first 3 samples. Digital filter: The digital filter can reduce the magnetic noise in field. As the display value is swing near by the set point to cause the relay on and off frequently. The function is to avoid the relay on and off frequently such as compressor.etc., Relay energized delay ry_.rd (Fig.3-): Settable range from 0.0(s)~9(m)59.9(s); The function is to avoid the miss action caused by noise. Some, the display value will swing caused by spark of contactor etc.. User can set a period to delay the relay energized. Relay de-energized delay ry_.fd (Fig.3-): Settable range from 0.0(s)~9(m)59.9(s); Energized / De-energized Fig.3 Delay & Hysteresis [ry_.sp] Hi Setting Relay Energized [ry_.rd] Energized delay ON De-energized delay [ry_.hy] Hysteresis [ry_.fd] Analogue output(option) Please specify the output type either an o~10v or 4(0)~20mA in ordering. The programmable output low and high scaling can be based on various display values. Reverse slope output is possible by reversing point positions. Output range: Voltage: 0~5V / 0~10V / 1~5V programmable Current: 0~10mA / 0~20mA / 4~20mA programmable Functions: Output range high aohs : Setting the Display value High to versus output range High(as like as 20mA in 4~20) Output range low aols : Setting the Display value Low to versus output range Low(as like as 4mA in 4~20) SCALE Set Scaling: Lo.SC: 0.00, Hi.SC: ; Output: Ao.LS: 50.00(Display Value Low), Ao.HS: (Display Value High) Control functions(option) Relay energized mode: Hi / Lo / Hi.HLd / Lo.HLd programmable Hi hi(fig.1-): Relay will energize when PV > Set-Point 0.00 Lo lo(fig.1-): Relay will energize when PV < Set-Point 0.00% 50.00% OUTPUT % Hi or Lo Relay Energized Fig.1 The range between aohs and aols should be over 20% of span at least; otherwise, it will be got less resolution of [ry!sp] Hi Setting analogue output. Fine zero & span adjustment: [ry!sp] Lo Setting Users can get Fine Adjustment of analogue output by front key of the [ry!md] meter. Please connect standard meter to the terminal of analogue hi Hi Relay Energized ON output. To press the front key (up or down key) of meter to adjust and lo Lo Relay Energized ON check the output. Energized functions: Start delay / Energized & De-energized delay / Hysteresis Zero adjust [aozro]: Fine Zero Adjustment for Analog Output; Start delay band and Start delay : Settable range: -1999~9999; The functions have Been designed for, Span adjust [aospn]: Fine Span Adjustment for Analog Output; To avoid starting current of inductive motor (6 s of rated current) Settable range: -1999~9999; with alarm. If the ry_.md relay energized mode had been set to be lo(lo). As the meter is power on and no input to display the "0" caused the relay will be energized. User can set a band and delay to inhibit the energized of relay. RS 485 Communication(option) The RS485 s protocol is Modbus RTU mode, and baud rate up to bps. It s convenience to remote monitoring, display for reading. CS1-VA CM1-VA A-05-3/6
4 CM1-VA OPERATING KEY *Please access to the Programming Level to check and set the parameters when users start to run the meter Operating Key: 4 keys for Enter(Function) / Shift(Escape) / Up key / Down key The meter has designed operation similar as PC's and Enter. In any page, press key means "enter" or "confirm setting", and press key means "escape( Esc )" or "shift". In Programming Level, the screen will return to Measuring Page after do not press any key over 2 minutes, or press for 1 second. Enter/Fun key Shift key Up key Down key Function Index (1) In any page, press to access the level or function index (2) From the function index to access setting status (1) In measuring page, press for 1 second to access user level. (2) In function index, press for 1 second to go back upper level. (3) In function index, press for 1 second to go back measuring page (1) In function index, press to go back to previous function index (1) In Function Index Page, press will go to the next Function Index Page. Setting Status (3) Setting Confirmed, save to EEProm and go to next function index (4) In setting status, press to Shift the setting position. (5) In setting status, press for 1 second to abort setting and go back this function index. (2) In setting status for function, press to select function (3) During number Setting, press can roll the digit up (2) In setting status for function, press to select function (3) During number Setting, press can roll the digit down. CS1-VA FRONT PANEL Relay status indication Display screen LED Display Operating Key RL1 RL2 ENT/FUNC Sht-KEY Up-KEY Down-KEY COM ~A Communication status indication Engineer Unit Number screen 0.8 (20.0mm) red high-brightness LED for 5 digital present value. I/O Status Indication Relay Energized: 2 square red LED RL1 display when Relay 1 energized; RL2 display when Relay 2 energized; RS485 Communication: 1 square orange LED COM will flash when the meter is receive or send data, and COM flash quickly means the data transient quicker. Stickers: Each meter has a sticker for engineer units. Operating Key: 4 keys for Enter(Function) / Shift(Escape) / Up key / Down key Pass Word: Settable range:0000~9999; User has to key in the right pass word so that get into [Programming level]. Otherwise, the meter will go back to measuring page. If user forgets the password, please contact with the service window. A-05-4/6
5 OPERATING DIAGRAM (The detail description of operation, please refer to operating manual.) Power ON Self-diagnosis cm!va ver! Pcode enter Pass Code NO Default:1000 YES input Show the model number Cm!va: CM1.VA Show the firmware version ver!0: Version 1.0 MEASURING PAGE Access 1sec Escape 1sec Enter the password to access programming Level INPUT GROUP min max 9(99 Mrst no Press Press min: the Minimum value of PV saving Checking only max: the Maximum value of PV saving Checking only Mrst: Reset the saved value of Maximum & Minimum yes / no relay RELAY GROUP ry!sp 10)0 ry@sp 10)0 ryrst no Programming Level User Level for 1 sec. to back Measuring Page ry!sp: Relay 1 Set-point -1999~9999 ry@sp: Relay 2 Set-point -1999~9999 ryrst: Reset for energized Latch of Relay yes / for 1 sec. can back to Measuring no ao ANALOGUE OUTPUT GROUP cm!va ver!0 min model of the meter firmware version Checking only Cyclic to first page rs485 RS485 GROUP CS1-VA CM1-VA A 8 A 7 A 6 A 5 A 4 A 3 A 2 A 1 pvdp losc hisc 9(99 locut avg 5 Mavg 8 Dfilt 8 Pcode 0000 pvdp: Decimal Point of PV 0 / )0 / / 0 losc: Low scale of PV hisc: High scale of PV -1999~9999 locut: Low Cut the PV avg: Average update for PV 1~99s Mavg: Moving Average update for PV 1~99s Dfilt: Digital filter 1~99s Pcode: Pass Code setting for access to Programming Level 0000~9999 B 1 B 2 B 3 B 4 B 5 B 6 B 7 B 8 B 9 rysb 0 rysd ry!md hi ry!hy 0 ry!rd ry!fd ry@md hi ry@hy 0 ry@rd rysb: Start band for Relay energized 0~9999 digits rysd: Start delay for Relay energized ry!md: Relay 1 energized mode off / lo / hi / lohld / hihld ry!hy: Relay 1 Hysteresis 0~5000counts ry!rd: Relay 1 energized delay ry!fd: Relay 1 de-energized delay ry@md: Relay 2 energized mode off / lo / hi lohld / hihld ry@hy: Relay 2 Hysteresis 0~5000counts ry@rd: Relay 2 energized delay D 1 D 2 D 3 D 4 D 5 D 6 D 7 aotyp V0-10 aols aohs 10)0 aozro aospn ZSclr none aolmt 11 aotyp: Analogue Output type selection V0-10 / V 0-5 / V 1-5 / A0-10 / A0-20 / A4-20 aols: the low point is relative to the lowest of Analogue output aohs: the high point is relative to the highest of Analogue output aozro: Fine Zero Adjustment for Analogue Low Output aospn: Fine Span Adjustment for Analogue High Output ZSclr: clear fine Zero / Span Adjustment for Analogue output none / aozro / aospn / both aolmt: Analogue Output High Limit 0.00~110.00% E 1 E 2 E 3 adres 1 baud 9600 prity NstB2 adres: Device number of the meter 1~255 baud: Baud rate 1200 / 2400 / 4800 / 9600 / / prity: Parity Nstb.1 / Nstb.2 / odd / even Next Page A-05-5/6
6 CM1-VA B 10 CS1-VA ry@fd ry@fd: Relay 2 de-energized delay Plesae refer to operating manual for detail description A-05-6/6
0 ~ 10 V ADL* DC 20~56V. 0 ~ 10mA. 0(4)~20 ma. selected one only
VOLT / CURRET Meter DESCRIPTIO economic type Voltage/Current Indicator has been designed with high accuracy measurement, display and communication of ~6V or ~1A for DC/AC/TMRS. They are also available
More informationAux. Powered. Excitation Supply
Frequency Indicator DESCRIPTI economic type Frequency Indicator has been designed with high accuracy measurement, display and communication of Frequency. The innovation feature is auto-range input from
More informationRS 485. Aux. Powered. ADH V1 0 ~ mv A1 0 ~ μa. Calibration:
VOLT / CURR Meter DESCRIPTI Voltage/Current Indicator has been designed with high accuracy measurement, display and communication of ~6V or ~1A for DC/AC/TMRS. Adtek builds flexible function as like as
More informationVOLT & CURRENT Meter(Dual Input & Display)
VOLT & CURRET Meter(Dual Input & Display) DESCRIPTIO Voltage & Current Meter has been designed with high accuracy dual channels(isolated) measurement, dual display and communication of ~6V and ~1A for
More informationVOLT & CURRENT Meter(Dual Input & Display)
VOLT & CURRET Meter(Dual Input & Display) DESCRIPTIO Voltage & Current Meter has been designed with high accuracy dual channels(isolated) measurement, dual display and communication of ~6V and ~1A for
More informationDC MULTIFUNTION POWER Meter
DC MULTIFUTI PWER Meter DESCRIPTI DC Multifunction Power Meter provide high accuracy measurement, display and communication of DC voltage, Current, Power, Energy(import / export), and Run Hour. They are
More informationDigital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
More informationsw rev. 55B DEVICE FOR THE PERMANENT CONTROL OF INSULATION ON THE SUPPLY LINES IN MEDICAL PRACTICE PLACES INSTALLATIONS
INSTRUCTIONS MANUAL IM831-U v0.92 HRI-R40W sw rev. 55B DEVICE FOR THE PERMANENT CONTROL OF INSULATION ON THE SUPPLY LINES IN MEDICAL PRACTICE PLACES INSTALLATIONS INDEX: GENERAL TYPES ACESSORIES AND OPTIONS
More informationINSTRUCTIONS MANUAL DEVICE FOR THE PERMANENT CONTROL OF INSULATION ON THE SUPPLY LINES IN MEDICAL PRACTICE PLACES INSTALLATIONS HRI-R40W
Page 2 / 16 INDEX: GENERAL TYPES ACESSORIES AND OPTIONS INSTALLATION WIRING DIAGRAMS CONNECTING TERMINALS DIAGRAMS WIRING DIAGRAM DESCRIPTION WORKING DESCRIPTION AND KEYBOARD WORKING DESCRIPTION AND PROGRAMMING
More informationEnergy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
More informationBU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS
INSTRUCTION MANUAL BU: EPBP GPG: DIN Rail Products Devices for the permanent control of insulation on supply lines for medical locations ISOLTESTER-DIG-RZ/RS/PLUS 1/23 More information than that reported
More informationPROCESS & TEMPERATURE CONTROLLERS
PROCESS & TEMPERATURE CONTROLLERS NOVA PD54 Series Thermocouple, RTD, & Process Inputs High Accuracy Auto-Tuning PID Heating & Cooling Models Universal Power Supply 1-24 VAC Up to 3 Relays & 2 Analog Outputs
More informationDC1010/DC1020/DC1030/DC1040
05/0 0-10-10-0-EN Page 1 of DC1010/DC1020/DC100/DC1040 DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and
More informationHigh Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informationRI-F200 Series. Single and Three Phase Multifunction Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-F200 Series Single and Three Phase Multifunction Energy Meter DIN 96 panel mounted -/1A or -/5A current transformer input Single phase or three phase network compatible Programmable voltage and current
More informationADAM 4000/4100 Series
ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
More informationEnergy Management. Type WM14 DIN Advanced version. Product Description 3-phase advanced power analyzer with integrated programming
Energy Management Type WM14 DI version Protection degree (front): IP40 2 digital outputs 16 freely configurable alarms with OR/AD logic linkable with up to 2 digital outputs RS422/485 serial output (MODBUS-RTU),
More informationPower analyzers and Energy Meters. Multifunction indicator. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X.
Power analyzers and Energy Meters Multifunction indicator Type WM12-DIN Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationEnergy Management Energy Meter with plug-in Output Modules Type EM4-DIN
Energy Management Energy Meter with plug-in Output Modules Type EM4-DIN Degree of protection (front): IP 40 Front dimensions: 9 DIN modules RS 422/485 Serial port by means of optional module Dual pulse
More informationEnergy Management Energy meters Type EM2-DIN
Energy Management Energy meters Type 6-dgt µp-based indicator Manual scrolling of partial and total energies: kwh, kvarh. TRMS measurement of distorted waves (voltage/current) All configuration functions
More informationModel Range code System Power supply Option. variables. Housing for panel mounting, (front) protection degree IP50 and optional RS485 serial output.
Power analyzers and Energy Meters Multifunction indicator Type WM12-96 Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase
More informationMODEL: 47LV. Digital Panel Meters 47 Series
Digital Panel Meters 7 Series DC INPUT DIGITAL PANEL METER ( ½ digit, LED display type) Functions & Features ½ digit DC input digital panel meter /8 DIN size Moving average function to suppress the display
More informationPID CONTROLLERS LT SERIES
PID CONTROLLERS LT SERIES The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4
More informationPower analyzers and Energy Meters Power Analyzer Type WM14-DIN
Power analyzers and Energy Meters Power Analyzer Type WM14-DIN Optional RS422/485 serial port Alarms (visual only) V LN, An Class 2 (active energy) Class 3 (reactive energy) Accuracy ±0.5 F.S. (current/voltage)
More informationMICRO-CONTROLLER X (48 48 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
More informationDC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification
01 May 20 30-10-10--EN Page 1 of DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of
More informationCS2-VA(V2.0) CS2-PR(V1.4) CS2-SG(V1.1) CS2-PM(V1.1) CS2-RS(V1.1) CS2-T(V1.0)
CS2-V(V2.0) CS2-PR(V.4) CS2-SG(V.) CS2-PM(V.) CS2-RS(V.) CS2-T(V.0) VOLT / CURRENT METER RELY DC SIGNL(20m/0V) CTROLLER STRIN GUGE/LOD CELL CTROLLER POTENTIOMETER CTROLLER RESISTNCE CTROLLER TEMPERTURE
More informationPower analyzers and Energy Meters Power Analyzer Type WM14-96
Power analyzers and Energy Meters Power Analyzer Type WM14-96 Optional RS422/485 serial port Alarms (visual only) V LN, An Class 2 (active energy) Class 3 (reactive energy) Accuracy ±0.5 F.S. (current/voltage)
More informationEnergy Management Power Analyzer with plug-in Output Modules Type W M22-DIN
Energy Management Power Analyzer with plug-in Output Modules Type W M22-DIN Front dimensions: 9 DIN modules Analogue output by means of optional module (20mA or 10VDC) RS 422/485 Serial port by means of
More informationExcellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
More informationEnergy Management Modular Power Analyzers Type WM2-96
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA Energy Management Modular Power Analyzers Type WM2-96 - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com Class 1 Modular power analyzer
More informationDigital Multifunction Instrument - Rish Master 3440
Application Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
More informationData Sheet. RISH Master Record %THD
Data Sheet %THD Application : measures important electrical parameters & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, active energy
More informationMODEL: AS4V. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT DC ALARM (dual or quad alarm trip; field-configurable) Functions & Features Provides relay outputs at preset DC input levels Quad or dual trip Setting and display in
More informationSHIMADEN DIGITAL INDICATOR
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD24 & KR16A SHIMADEN DIGITAL INDICATOR BASIC FEATURES ohigh Accuracy ±0.1% FS+1 digit o1/1000ºc Resolution Indication Possible (Pt input
More informationR24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
More informationEnergy Management. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X. Type Selection. Input specifications
Energy Management Multifunction indicator Type WM12-DI Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase measurements:
More informationMeasuring Transducer MT4xx series Programmable AC Current Transducer MT418
Measuring Transducer MT4xx series Programmable AC Current Transducer MT418 o RMS AC current or frequency measurements o Current auto range measurements up to 12 A o Frequency measurement range 16 400 Hz
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
More informationMODEL: M2XPA3. [2] EXCITATION 2: 4 V DC / 20 ma 3: 8 V DC / 20 ma 4: 12 V DC / 20 ma Configurator software is used to change the excitation value.
Super-mini Signal Conditioners Mini-M Series FREQUENCY TRANSMITTER (PC programmable) Functions & Features Converts the output from a pulse-type transducer into a standard process signal PC programmable
More informationMICRO-CONTROLLER X (96 96 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
More information1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01
Monitoring Relays -Phase True RMS AC/DC Over and Under Current Types DIC0, PIC0 DIC0 PIC0 TRMS AC/DC over + under, over+over, under+under current and voltage monitoring relays DC process signal plus/minus
More information1 INTRODUCTION ORDER CODE / INFORMATION
INTRODUCTION ORDER CODE / INFORMATION 269/269Plus * * * * * * 269/269Plus SV D/O.4 ORDER CODE / INFORMATION Motor management relay Standard version Drawout version Phase CT Ground CT (required for D/O
More informationHawk 3 Digital Panel Meter / Controller
File # E199939 All parameters set from easy to understand front panel access One, two or four 5-amp relays optional Five user-selectable brightness levels 1/8 DIN, shallow depth case, 3.24 RS485 digital
More informationALPHA 50 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationGeneral Specifications
General Specifications GS 05F01D01E MODEL UM351 Digital Indicator with Alarms with Active Color PV Display General Model UM351 Digital Indicator with Alarms is a precision alarm instrument provided with
More informationRISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:
Application : RISH Master 3490 SS is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy having auto-resetting 8 digit seven segment LED counter. The unit
More informationZHUHAI PILOT TECHNOLOGY CO., LTD.
SPM32 Multifunctional Power Meter SPM32 Multifunction Power Meter Installation & Operation Manual V1.0 ZHUHAI PILOT TECHNOLOGY CO., LTD. Danger and warning! This device can be installed only by professionals.
More informationGeneral Specifications
General Specifications MODEL UT50L Limit Controller GS 5DD-0E Overview The UT50L is an FM approved limit controller that can be configured either as a high limit or as a low limit controller by a user.
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationVIP Current & Power Multimeter
VIP Current & Power Multimeter Rev 1.6 Table of Contents 1. Mechanical Installation... 3 2. Wiring diagram... 4 3. Specifications... 5 Technical Specifications... 5 3.2 Measuring Specifications... 5 4.
More informationDPF-MAC Auto power factor controller
Digital Electric& Electronics System DPF-MAC Auto power factor controller MULTI POWER FACTOR AUTOMATIC MULTI POWER FACTOR AUTOMATIC Introduction DPF-MAC increases usage efficiency by controlling the power
More informationRI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-D440 Three Phase easywire Multifunction DIN Rail Energy Meter Four module DIN rail mounted Energy pulse LED 330mV Input from easywire CTs (or -/1A and -/5A current transformer input with TAS-SCTEWA
More informationInstallation & Operation Manual ELNet VIP
Installation & Operation Manual ELNet VIP Electrical Measurements Table of Contents 1. Mechanical Installation... 1-3 2. Wiring diagram... 2-5 3. Specifications... 3-6 Technical Specifications... 3-6 Measuring
More informationUNIVERSAL MEASURING INSTRUMENTS. TNM 34xx. TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument 1/49
TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument True RMS measurement User-friendly programing Four different types for optimal specification RS485 interface For 3- or 4-wire connection Compact
More informationDUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER
OPERATOR S MANUAL DUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER Masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India Web Site: www..com
More information- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION
ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS
More informationMICRO-CONTROLLER X (48 96 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
More informationGeneral Specifications
General Specifications GS 77J0A070E Model VJA7 Distributor (Multifunction) (Isolated Singleoutput and Isolated Dualoutput Types) Overview This plugin type distributor is used in combination with wire type
More informationWIRELESS MODBUS GATEWAY WGW410
WIRELESS MODBUS GATEWAY WGW410 The Tekon Wireless Modbus Gateway WGW410 is specifically designed to meet the most rigorous requirements of operation in the industrial process environments. Due to their
More informationDC Voltage Hawk II H235 Series Advanced Digital Panel Meter
% DC Voltage Hawk II H35 Series Advanced Digital Panel Meter Easily Programmed from the Front Panel User-Friendly Software Functions Include: Password Display Scaling Decimal Point Selection Set Point
More informationINTELLIGENT DIGITAL MULTI POWER METER [DIC-MPM]
Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Consist of basic unit and optional modules 10 years back-up of integrated energy data Large LCD, high brightness High
More informationMODEL: 48NDV. Bargraph Indicators 48N Series
Bargraph Indicators 8N Series BARGRAP INDICATING AAR (with -digit digital meter) Functions & Features Displays a process variable in graphic bargraph of ED segments Clear -digit digital meter Provides
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationTemperature Controller
Temperature Controller 1/8 IN - 48 x 96mm Platinum Series X400 Line Cost Effective Solutions This 48x96mm size controller of the Platinum Series, provides a high degree of functionality and reliability
More informationIndustrial Modbus I/O Modules
Industrial Modbus I/O Modules Modbus I/O Modules Introduction & Features Digital Input / Output Modules Analog Input / Output Modules Modbus I/O Modules The Best Choice For Your SCADA Applications Introduction
More informationGeneral Specifications
General Specifications GS 0F01D0E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision 1/8 DIN alarm instrument provided with
More informationENGLISH WM3-96. ISE, Inc Royalton Rd. - Cleveland, OH USA - Tel: (440) Fax: (440)
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com WM3-96 OPERATING INSTRUCTIONS General features 2 Technical features 3 Installation
More informationma/bcd Converter Model MFC-201 ma/bcd The MFC-201 ma/bcd Converter is a device designed to convert a DC current signal into BCD (8421) signals.
1 Definition ma/bcd Converter Model MFC-201 ma/bcd The MFC-201 ma/bcd Converter is a device designed to convert a DC current signal into BCD (8421) signals. 2 Operating Principle An electronic circuit
More informationGeneral Specifications
General Specifications GS 0F01D01E Model UM1 Digital Indicator with Alarms with Active Color PV Display General Model UM1 Digital Indicator with Alarms is a precision alarm instrument provided with universal
More informationB850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationGeneral Specifications
General Specifications Model UM330 Digital Indicator with Alarms GS 05F0D00E General Model UM330 Digital Indicator with Alarms is a precision alarm instrument with universal input /8DIN. For excellent
More informationEnergy Management. Type WM14-96 Basic Version. Product Description. How to order WM14-96 AV5 3 D PGX. Type Selection. Input specifications.
Energy Management Power Analyzer Type WM-96 Basic Version Optional dual pulse output Alarms (visual only) V, An Optional galvanically insulated measuring inputs Product Description 3-phase power analyzer
More informationMODEL: R30US4. Remote I/O R30 Series
Remote I/O R30 Series UNIVERSAL INPUT MODULE (4 points, isolated) Functions & Features 4 points universal input I/O module Isolation between the channels Input range of each channel is individually adjustable
More informationPRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID
RI-D140 Three Phase Multifunction DIN Rail Energy Meter (MID Certified) Four module DIN rail mounted Energy pulse LED True RMS measurement Cost effective and accurate Modbus communication -/1A or -/5A
More informationDOCUMENTATION. Its affordable price allows you to meet your budget target.
DOCUMENTATION ULCOS is a real concentrate of technology, mixing performance and versatility. It is able to meet your high level expectation, for technical tender specifications. Its affordable price allows
More informationMonitoring Relays 3-Phase Load Guard Types DWB01, PWB01
Monitoring Relays 3-Phase Load Guard Types DWB0, PWB0 DWB0 PWB0 TRMS load guard relays for three phase balanced applications Measuring if the power factor is within set limits Measure voltage on own power
More informationGeneral Specifications
General Specifications GS 77J01Q08-01E Model VJQ8 Pulse to Analog Converter (Multi-function) (Isolated Single-output and Isolated Dual-output Types) General This plug-in type pulse to analog converter
More informationProgrammable AC Voltage Transducer MT416
Programmable AC Voltage Transducer MT416 RMS AC voltage or frequency measurements Voltage auto measurements up to 600 V L-N Frequency measurement 16 400 Hz AC or universal wide auiliary power 24 300 Vdc,
More informationProgrammable AC Current Transducer MT418
Programmable AC Current Transducer MT418 RMS AC current measurements Current auto range measurements up to 12 A Frequency measurement range 16 400 Hz AC or universal wide auiliary power supply range 24
More informationEnergy Management Modular Smart Power Quality Analyzer Type WM3-96
Energy Management Modular Smart Power Quality Analyzer Type WM3-96 Class 0.5 (current/voltage) 32-bit µp-based modular smart power quality analyzer Graph display (128x64 dots) Front size: 96x96 mm Measurements
More informationENGLISH. General features 2. Technical features 3. Installation 10. Preliminary operations 12. Front panel description 13.
LDI 35 OPERATING INSTRUCTIONS General features 2 Technical features 3 Installation 10 Preliminary operations 12 Front panel description 13 Operating mode 15 Important: We suggest you keep the original
More informationIntegra 1560 and 1580 Digital Transducer Systems
Integra 1560 and 1580 multi function transducers provide high accuracy
More informationMODEL: 47LPA. [2] ALARM OUTPUT 0: None 1: N.O. relay contact, 4 points 2: SPDT relay contact, 2 points. Digital Panel Meters 47 Series
Digital Panel Meters 47 Series FREQUENCY INPUT DIGITAL PANEL METER (4½ digit, LED display type) Functions & Features 4 ½ digit digital panel meter 1/8 DIN size Accepts a pulse train input to measure rotation
More informationCentrale de mesure Power Meter PM500 Merlin Gerin
Notice d'installation et d'utilisation Installation and user manual Centrale de mesure Power Meter PM500 Merlin Gerin 059473_D Introduction and description Package contents c one PM500 power meter with
More informationSHIMADEN PROGRAM CONTROLLER
Shimaden, Temperature and Humidity Control Specialists C %RH SHIMADEN PROGRAM CONTROLLER approved BASIC FEATURES Full multi-input and multi-range performance User selectable Thermocouple, RTD, V, mv and
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationMETERSUK. SmartLink D Y N A M i T E. EM415 MOD Series. User Manual KEY FEATURES INDEX 3. TECHNICAL DESCRIPTION. Single Phase Metering
METERSUK LTD s a l e s @ m e t e r s. c o. u k 0 1 5 2 4 5 5 5 9 2 9 Series Smart Energy Meter KEY FEATURES Single Phase Metering Single phase metering 4 din modules, Standard DIN rail Format (DIN43880)
More informationS200 I/O System Units
S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationNetBiter I/O Extender 4RO 6RTD 8DIO - DAIO User Manual Revision 1.00
NetBiter I/O Extender 4RO 6RTD 8DIO DAIO User Manual Revision 1.00 IntelliCom Innovation AB Linjegatan 3D SE302 50 Halmstad SWEDEN Phone +46 35 18 21 70 Fax +46 35 18 21 99 email info@intellicom.se www
More informationB850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationBS-3520 Digital Indicator
BS-3520 Digital Indicator The Better Way for Weighing & easurements Table of Contents. Introduction...3 - Trait... 3-2 Warning... 4 2. Specification...5 3. External Size...6 4. Description on Front Panel...7
More informationDigital Multifunction Meter - RISH Integra 2000
Features Four line graphic LCD display 1+ parameters Fast communications Customer configurable Easy to use Output options: 4 x -1mA 4 x 4-2mA 1 or 2 energy pulses Panel mounted Neutral current measurement
More informationPower Meter Series PM3200 Functions and characteristics
Functions and characteristics PB108433 This PowerLogic Power meter offers basic to advanced measurement capabilities. With compact size and DIN rail mounting, the PM3200 allows mains and feeders monitoring
More informationMultimeter 500CVD21 RTU500 series
Remote Terminal Units - Data sheet Multimeter 500CVD21 RTU500 series CT/VT interface with 4 voltage and 24 current inputs for direct monitoring of 3/4 wire 0 300 V AC (line to earth), 0...500 V AC (phase
More information