s Climatix extension module 26 I/Os POL985.00/XXX
|
|
|
- Delphia Harrell
- 5 years ago
- Views:
Transcription
1 s Climatix TM Climatix extension module 26 I/Os POL985.00/XXX The POL985.00/XXX extension module extends the number of I/Os of Climatix 600 controllers. It is a product of the Climatix range. The extension module offers the following features: Power supply AC 24 V or DC 24 V 8 universal I/Os AC 24 V and DC 5 V power supply for active sensors on board 3 analog inputs NTC 10k and NTC 100k 3 digital inputs for potential-free contacts 2 digital inputs galvanically isolated for AC 115/230 V 8 relay outputs 2 triac outputs (AC 24 V 230 V) Peripheral bus interface for local / remote extension I/Os The POL985.00/xxx extension module is part of the Climatix product range (also refer to Data Sheet 3900 and Mounting Instructions M3910). CB1N3921en Building Technologies
2 Climatix product range Installation concept Technical data Power supply Analog inputs B1...B3 (T1) Operating voltage AC 24 V ± 20%; DC 24 V ± 10% Frequency Hz Power consumption 850 ma, 11 W Pass through current Max. 4 A Connection Peripheral bus NTC 10k (B 25/85 = 3977 K) Sensor current C Temperature Accuracy -50 C 2.5 K 0.6 K -40 C 1.4 K 0.4 K -30 C 0.9 K 0.2 K -10 C 0.5 K 0.1 K 50 C 0.7 K 0.2 K 70 C 1.3 K 0.4 K 90 C 2.5 K 0.7 K 100 C 3.4 K 0.9 K 2 / 14
3 NTC 100k (B 25/85 = 3977 K) Sensor current C Temperature Accuracy 0 C 1.8 K 0.5 K 10 C 1.2 K 0.3 K 30 C 0.7 K 0.2 K 70 C 0.5 K 0.2 K 110 C 0.8 K 0.2 K 120 C 1.0 K 0.3 K 140 C 1.5 K 0.4 K 150 C 1.9 K 0.5 K Connecting thermistor to analog input Universal I/Os X1 X8 (T2, T3) Configurable Reference potential Contact voltage Overvoltage protection By software Terminals Max. DC 24 V (SELV) Up to 40 V Analog inputs (X1 X8) Ni1000 Sensor current Accuracy in the range C Pt1000 Sensor current Accuracy in the range C Max. 1.4 ma 0.1 K 0.5 K Max. 1.8 ma 0.1 K 0.5 K 3 / 14
4 NTC 10k (B 25/85 = 3977 K) Sensor current Max. 140 μa Temperature range Accuracy C 1 K 0.2 K C 0.5 K 0.1 K C 1 K 0.3 K C 3 K 1 K C 6 K 2.5 K NTC 100k (B 25/85 = 3977 K) Sensor current Max. 140 μa Temperature range Accuracy C 3 K 0.2 K C 1 K 0.1 K C 0.5 K 0.1 K C 1 K 0.2 K kω Sensor current Max. 1.8 ma 1 Ω Accuracy 4 Ω DC 0 5 V input for ratiometric sensors 1 mv Accuracy at 0 V 2 mv Accuracy at 5 V 25 mv Input resistance 100 kω Ratiometric sensor Connecting a ratiometric sensor to universal I/O Connecting NTC to universal I/O Analog inputs (X1 X8) DC V input Accuracy at 0 V Accuracy at 5 V Accuracy at 10 V Input resistance 1 mv 2 mv 25 mv 50 mv 100 kω 4 / 14
5 DC 0/4 20 ma input Accuracy at 4 ma Accuracy at 12 ma Accuracy at 20 ma 1 μa 25 ua 70 ua 120 ua Current transmitter Voltage input DC V Current input ma Digital inputs (X1 X8) 0/1 digital signal (binary) For potential-free contacts Sampling voltage / current DC 24 V / 8 ma Contact resistance Max. 200 Ω (closed) Min. 50 kω (open) Delay 10 ms Pulse frequency Max. 20 Hz Connecting floating contacts to universal I/O Analog outputs (X1 X4) DC 0 10 V output Accuracy at 0 V Accuracy at 5 V Accuracy at 10 V Output current 11 mv 66 mv 95 mv 124 mv 1 ma (short-circuit-proof) 5 / 14
6 DC 4 20 ma output Accuracy at 4 ma Accuracy at 12 ma Accuracy at 20 ma 22 μa 150 μa 196 μa 243 μa Connecting voltage output and current output to universal I/Os Analog / digital outputs (X5 X8) DC 0 10 V output Accuracy at 0 V Accuracy at 5 V Accuracy at 10 V Output current DC output for off board loads Switching voltage Switching capacity 11 mv 66 mv 95 mv 124 mv 1 ma (short-circuit-proof) DC 24 V Max. 25 ma Connecting voltage output and offboard relays to universal I/Os 6 / 14
7 Powering sensors active / ratiometric 5 V, 24 V (T2, T3) 2 x 2 outputs Voltage / current Voltage / current Reference potential Connection DC 5 V ± 2.5% / 2 x 20 ma DC 24 V 10%, -25% / 2 x 40 ma Terminals Short-circuit-proof Ratiometric sensor Pressure transmitter Connecting a ratiometric sensor AC 24 V sensor supply voltage Digital inputs potential-free D1...D3 (T4) 0/1 digital signal (binary) For potential-free contacts Sampling voltage / current DC 24 V/ 8 ma Contact resistance Max. 200 Ω (closed) Min. 50 kω (open) Delay 10 ms Pulse frequency Max. 30 Hz Connecting floating contact to digital input Relay outputs Q1...Q8 (T5, T6) Relay: Type, contact Monostable, NO contact Contact rating Switching voltage AC 24 V 230 V Nominal current (res. / ind.) Max. AC 3 A/2 A (cosφ 0.6) Switching current at AC 19 V Min. AC 30 ma 7 / 14
8 Warning Do not mix SELV / PELV and line voltage on the same terminal. Use external protection for inductive load. Connecting indicator lamps to relay output Triac outputs DO1, DO2 (T7) Triac output values Switching voltage Switching capacity Min. current AC 24 V 230 V Max. 0.5 A 10 ma Warning Do not mix SELV / PELV and line voltage on the same terminal. Use external protection for inductive load. Connecting solenoid valves to triac output 8 / 14
9 Digital inputs AC 230 V DL1 DL2 (T8) 0/1 digital signal (binary) Galvanically isolated contact Nominal voltage AC 115 V 230 V Frequency range Hz Sample current V AC Delay 100 ms Pulse frequency Max. 5 Hz Connecting a AC 230 V signal to a galvanically isolated digital input Connection terminals Possible plugs for I/O signals (not included) Solid wire Stranded wire (twisted and with ferrule) Cable lengths Phoenix FKCVW 2,5 / x-st Phoenix FKCT 2,5 / x-st Phoenix MVSTBW 2,5 / x-st Phoenix FRONT-MSTB 2,5 / x-st mm² mm² In compliance with load, local regulations and installation documents Peripheral bus Environmental conditions Power supply Ueff = AC 24 V ± 20%, fmain = Hz or U = DC 24 V ± 10%, no internal fuse Bus termination selectable (680 Ω / 120 Ω +1 nf / 680 Ω ) Board-to-board (not included) Board-to-wire (not included) ZEC 1,0 / 4-LPV-3,5 GY35AUC2CI1 ZEC 1,0 / 4-ST-3,5 GY35AUC1R1,4 Stranded wire (twisted and with ferrule) mm² Cable lengths Max. 30 m Addressing DIP switches 1 5 Termination DIP switch 6 Operation IEC class 3K5 Temperature C Humidity <90% r.h. (non-condensing) Atmospheric pressure Min. 700 hpa, corresponding to max. 3,000 m above sea level Transport IEC class 2K3/2K4 Temperature C Humidity <95% r.h. (non-condensing) Atmospheric pressure Min. 260 hpa, corresponding to max. 10,000 m above sea level 9 / 14
10 Protection Standards General data Status of LEDs Degree of protection IP20 (EN 60529) Safety class Suitable for use in plants with safety class II Product safety Automatic electrical controls EN Electromagnetic compatibility Immunity in the industrial sector EN Emissions in the domestic sector EN CE conformity EMC directive 2004/108/EC Low-voltage directive 2006/95/EC Listings UL916, UL873 CSA C22.2M205 RoHS directive 2002/95/EC (Europe) ACPEIP (China) Dimensions of controller 153 x 110 x 75 mm Weight excl. packaging 273 g Base Plastic, pigeon-blue RAL 5014 Housing Plastic, light-grey RAL 7035 The status of the BSP LED is defined as follows: Status Red blinking at 2 Hz Green on Meaning BSP error or slave address error BSP running The status of the BUS LED is defined as follows: Status Red on Green on Green on and red on (yellow) Meaning Communication error Communication running Communication running but parameter not successfully configured 10 / 14
11 DIP switches The extension module is equipped with DIP switches for communication with the controller. Switches 1, 2, 3, 4, and 5 are configurable to set the slave address, while switch 6 acts as peripheral bus termination. When the extension module operates as the termination in the network, switch 6 must be set to ON. The bit order for the switches is from 5 to 1. The lowest bit is 5 while the highest bit is 1. The following table shows the logic of slave address: Switch Switch Switch Switch Switch By combining switches 1, 2, 3, 4 or 5, a maximum of 31 slave addresses can be configured. The configuration formula is as follows: =31. Below are some configuration examples: DIP switch configuration of extension module Slave address (controller) Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Schematics 1 Off Off Off Off On 2 Off Off Off On Off 3 Off Off Off On On 4 Off Off On Off Off On On On On Off Note 31 On On On On On The same address of extension module must be set in the application program of the controller. Zero cannot be set as the slave address. 11 / 14
12 Ordering data Extension module 26 I/Os POL985.00/STD Accessories Connector set (spring cage, cable top entry) 2 x Phoenix FKCT 2,5/3-ST KMGY 2 x Phoenix FKCT 2,5/5-ST GY x Phoenix FKCT 2,5/6-ST GY x Phoenix FKCT 2,5/7-ST GY x Phoenix FKCT 2,5/8-ST GY x Phoenix ZEC 1,0 / 4-LPV-3,5 GY35AUC2CI1 2 x Phoenix ZEC 1,0 / 4-ST-3,5 GY35AUC1R1,4 POL098.56/XXX Engineering notes To ensure protection against accidental contact with relay connections carrying voltages above 42 V eff, the module must be installed in an enclosure (preferably a control panel). It must be impossible to open the enclosure without the aid of a key or tool. AC 230 V cables must be double-insulated against safety extra low-voltage (SELV) cables. Disposal notes The module contains electrical and electronic components and must not be disposed of together with household waste. Local and currently valid legislation must be observed! 12 / 14
13 Layout of extension module 26 I/Os Right side Left side 13 / 14
14 2009 Siemens Switzerland Ltd. Subject to change 14 / 14
QFM21... Duct sensors. Symaro. for relative humidity and temperature
1 864 1864P01 Symaro Duct sensors for relative humidity and temperature QFM21... Operating voltage AC 24 V / DC 13.5...35 V Signal output DC 0...10 V / 4 20 ma for relative humidity Signal output DC 0...10
Technical Information Barrier RB223
TI00132R/09/EN/13.14 71275790 Products Solutions Services Technical Information Barrier RB223 One or two-channel barrier Loop-powered barrier for the safe separation of 4 to 20 ma standard signal circuits
Room Sensors. In ventilating and air conditioning plants to acquire relative humidity and temperature in rooms. Humidity measuring range
1 857 1857P01 Room Sensors for relative humidity and temperature QFA20 Use Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V for relative humidity Signal output DC 010 V or LG-Ni 1000 or T1
Outside Temperature Sensors
1 814 1814P01 Symaro Outside Temperature Sensors QAC31 Active sensors for acquiring the outside temperature Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or 420 ma Use The QAC31 outside
Room Sensors. for relative humidity and temperature
1 857 1857P01 Room Sensors for relative humidity and temperature QFA20 Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V for relative humidity Signal output DC 010 V or LG-Ni 1000 or T1 for
20 General technical data XI/ON
20 General technical data XI/ON General technical information General technical data XI/ON Potential isolation Ambient temperature Operating temperature Storage temperature Relative humidity Noxious gas
Room Temperature Controllers. for heating and cooling systems
3 041 RCU10 RCU101 Room Temperature Controllers for heating and cooling systems RCU10 Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Operating modes: normal
EY-EM 527: Remote I/O module, ecolink527
Product data sheet 94.078 EY-EM 527: Remote I/O module, ecolink527 How energy efficiency is improved Regulation, control, monitoring and optimisation of operational systems, e.g. room automation or HVAC
Room sensors. In ventilating and air conditioning plants to acquire relative humidity and temperature in rooms. Humidity measuring range
1 857 1857P01 QFA20 Room sensors For relative humidity and temperature QFA20 Operating voltage AC 24 V or DC 13.5 35 V Signal output DC 0...10 V for relative humidity Signal output DC 0...10 V or LG-Ni
Rotary actuators for ball valves
4 658 Rotary actuators for ball valves for ball valves VAI61.. / VBI61.. and VAI60.. / VBI60.. / DC 24 48 V / AC 230 V Electromotive rotary actuators with spring return for emergency position For 2-position,
Electromotoric actuators
s 4 540 ACVATIX Electromotoric actuators for Combi valves VPI45.., DN40/50 SQD65 operating voltage AC 230 V, 3-position control signal operating voltage AC 24 V, 3-position control signal SQD65 operating
Wireless multizone receiver RDE-MZ6
s 1 428 Wireless multizone receiver RDE-MZ6 for floor heating / zone heating systems Mains-powered RDE-MZ6 multizone wireless receiver (AC 230 V) DIN rail mounting 2-position control with On/Off output
SAX..P. Electromotoric actuators for valves ACVATIX. with a 20 mm stroke
s 4 509 ACVATIX Electromotoric actuators for valves SAX..P with a 20 mm stroke SAX31P.. Operating voltage AC 230 V, 3-position control signal SAX61P.. Operating voltage AC/DC 24 V, control signal DC 0
SAT.. Electromotoric actuators for valves ACVATIX. with a 5.5 mm stroke and 300 N positioning force
4 584 ACVATIX Electromotoric actuators for valves SAT.. with a 5.5 mm stroke and 300 N positioning force SAT31.. Operating voltage AC 230 V, 3-position control signal SAT61.. Operating voltage AC/DC 24
SAY..P.. A6V ACVATIX Electromotoric actuators for valves. with a 15 mm stroke
s A6V10628469 ACVATIX Electromotoric actuators for valves SAY..P.. with a 15 mm stroke SAY31P03 Operating voltage AC 230 V, 3-position control signal Operating voltage AC/DC 24 V, control signal DC 0 10
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
em4 local - Robust Specific characteristics Part number
em4 em4 local em4 local Very compact and easy to program nanoplc Save time in designing your application using the most intuitive graphical function block language of the market Measure accurately your
Type Nominal voltage (V) Code HSV V
Speed control Speed control relay - mm Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - -wire PNP or NPN, Namur, voltage 0-0V or volt-free contact type Works
S200 I/O System Units
S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features
EY-EM 522, 523: Remote I/O module, ecolink522, 523
Product data sheet 94.077 EY-EM 522, 523: Remote I/O module, ecolink522, 523 How energy efficiency is improved Regulation, control, monitoring and optimisation of operational systems, e.g. room automation
Room Temperature Controllers. for heating and cooling systems
3 041 RCU10 RCU10.1 Room Temperature Controllers for heating and cooling systems RCU10... Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Operating modes:
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Pressure transmitter AKS 32 and AKS 33
Data sheet Pressure transmitter AKS 32 and AKS 33 AKS 32 and AKS 33 are pressure transmitters that measure a pressure and convert the measured value to a standard signal: y 1 5 V DC or 0 10 V DC for AKS
Differential pressure sensors
1 912 1912P02 QBM64/ 1912P01 QBM63/ Differential pressure sensors for air and non-aggressive gases, with a diaphragm sensing element QBM63/ QBM64/ With choice of pressure-linear or extracting-the-root
em4 em4 alert em4 alert 2G
em4 em4 alert em4 alert 2G Connect your equipment to the GPRS 2G network and get alerted by SMS or email Control your application by SMS Receive data reports by SMS or datalogs by email or FTP in.csv (Excel)
Room Temperature Controllers. for heating and cooling systems
3 048 RCU15 Room Temperature Controllers for heating and cooling systems RCU15 Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Control depending on room-
SAL.. ACVATIX Electromotoric rotary actuators for butterfly or slipper valves. with 90 rotary angle
s 4 502 ACVATIX Electromotoric rotary actuators for butterfly or slipper valves SAL.. with 90 rotary angle SAL31.. Operating voltage AC 230 V, 3-position control signal SAL61.. Operating voltage AC/DC
Room air quality sensors
1 961 QPA10 / QPA20 1961P01 1961P02 QPA20 D Room air quality sensors QPA10.. QPA20.. Maintenance-free sensing element (depending on type) based on optical infrared absorption measurement (NDIR 1) ) Or
High-precision process calibrator Model CED7000
Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry
Binary Output Series 9175
Binary Output > Intrinsically safe output [Ex ia] IIC / [Ex ib] IIC > Galvanic isolation between input, output and power supply > Open-circuit and short-circuit monitoring (can be switched off) > For use
RMA42. Technical Information
Technical Information RMA42 Process transmitter with control unit Digital process transmitter for mounting on a top-hat rail for monitoring and visualizing analog measured values Application Plant and
Electronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
Air damper actuators. OpenAir GDB..1E. Electronic motor driven actuators for open-close, three-position and modulating control
s OpenAir Air damper actuators GDB..1E Electronic motor driven actuators for open-close, three-position and modulating control Nominal torque 5 Nm Operating voltage AC 24 V ~ / DC 24 48 V or AC 100 240
02/11/2015
Smart range with Removable Terminal blocks XD26RBT Smart Part number 88974561 Designed for industrial, commercial, medical and paramedical machines Faster maintenance process which improves the machine
Rotary actuators for ball valves
4 658 Rotary actuators for ball valves for ball valves VA..61.. / VB..61.. and VA..60.. / VB..60.. / DC 24 48 V / AC 230 V GA..9E Electromotive rotary actuators with spring return for emergency position
SAX.. ACVATIX Electromotoric actuators for valves. with a 20 mm stroke
s 4 501 ACVATIX Electromotoric actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal Operating voltage AC/DC 24 V, control signal DC 0 10 V, 4 20
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD.5G.H4.02 Danfoss A/S (IC-MC/mr), 09-2004 Introduction AKS 32 and AKS 33 are pressure transmitters that
SAX.. Electromotoric actuators for valves ACVATIX. with a 20 mm stroke
s 4 501 ACVATIX Electromotoric actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10
Zelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
SAY..P.. A6V ACVATIX Electromotoric actuators for VPI46. with a 15 mm stroke
s A6V10628469 ACVATIX Electromotoric actuators for VPI46 SAY..P.. with a 15 mm stroke Operating voltage AC 230 V, 3-position control signal Operating voltage AC/DC 24 V, control signal DC 0 10 V, 4 20
3 Ex i Isolators. Switching Repeater with Power Relay (250 V / 4 A) Type 9170/ Type 9170/
3 Ex i Isolators Switching Repeater with Power Relay Intrinsically safe input [Ex ia] IIC Galvanic isolation between input, output and power supply Open-circuit / short-circuit monitoring and messaging
Overview of types. Technical data
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control dampers
DATA SHEET. CIO multi-inputs. CAN bus-based I/O module
DATA SHEET CAN bus-based I/O module 8 multi-functional inputs Selectable as: o Digital input, 0(4) to 20 ma, 0 to 10 V, RMI, Pt100, Pt1000, Thermocouple type E, J, K, N, R, S or T Wire break detection
Air damper actuators
4 656 OpenAir TM Air damper actuators GBB...2 Electronic motor-driven linear actuators for three-position and modulating control AC 24 V / AC 230 V Nominal force 550 N Travel 75 mm, mechanical adjustable
02/11/2015
Smart "Compact" range with display CD20 Smart Part number 88974053 Highly visible blue LCD with 4 lines of 18 characters and configurable backlighting Allow the use of the entire library of specific functions
Room Temperature Controllers. for heating and cooling systems
3 041 RCU10 RCU10.1 Room Temperature Controllers for heating and cooling systems RCU10... Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Operating modes:
SAX.. ACVATIX Electromotoric actuators for valves. with a 20 mm stroke
s 4 501 ACVATIX Electromotoric actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10
Compact room automation stations, BACnet MS/TP, AC 24 V
Desigo Room Automation Compact room automation stations, BACnet MS/TP, AC 24 V DXR2.M11.., DXR2.M12P.., DXR2.M12PX.., DXR2.M18.. For building with increased demands placed on functionality and flexibility
Coupling Relays and Converters
Overview Area of application In automation and control engineering it will always be necessary to work with analog signals. The interfaces for analog signals that have established themselves as the standard
02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
Phase control Single function phase control relay - 7.5 mm Control of -phase networks: phase sequence, total phase failure Multi-voltage from x 08 to x 480 V Controls its own supply voltage True RMS measurement
NI SCXI Specifications
NI SCXI -1127 Specifications 32-Channel Relay Multiplexer/Matrix Input Characteristics This document lists specifications for the NI SCXI-1127 multiplexer/matrix module. All specifications are subject
TRIO-PS/1AC/24DC/ 5. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/ 5 Order No.: 2866310 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A Commercial data EAN 4046356046640 Pack 1 pcs. Customs
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
NI 2865A 0.3 A Matrix Cards for NI SwitchBlock
SPECIFICATIONS NI 2865A 0.3 A Matrix Cards for NI SwitchBlock This document lists specifications for the NI 2865A matrix relay cards. All specifications are subject to change without notice. Visit ni.com/manuals
PART NUMBERING SYSTEM
Plug-In Timer 11 pins Multifunction or monofunction Compact body for space saving Wide time range (from 0.5 seconds to 10 days delay) Universal power supply (12-240 Vz) 1 or 2 relay outputs (SPDT / Changeover)
Functional data Factory settings Variable Settings
echnical data sheet Rotary actuator RF-MF(-O) Multifunctional rotary actuator with emergency control for and 3 way control ball valve orque Nm Nominal voltage AC/DC V Control: Modulating DC... V or variable
SAV.. ACVATIX Electromotoric actuators for valves. with a 20/40 mm stroke
s 4 503 ACVATIX Electromotoric actuators for valves SAV.. with a 20/40 mm stroke SAV31.. Operating voltage AC 230 V, 3-position control signal Operating voltage AC/DC 24 V, control signal DC 0 10 V, 4
27/04/2015
Modular Carril DIN 35 mm HIL Part number 84871120 Control of AC and DC currents Automatic recognition of AC/DC Measurement ranges from 2 ma to 10 A Choice between over and undercurrent True RMS measurement
JUMO ecotrans Lf 03 Microprocessor Transmitter / Switching Device for conductivity or resistivity and temperature
Data Sheet 20272 Page /7 JUMO ecotrans Lf 0 Microprocessor Transmitter / Switching Device for conductivity or resistivity and temperature Type 20272 Housing for DIN rail mounting (5 x 7.5 mm to DIN EN
CAN-IO Custom IO remote module
CAN-IO Custom IO remote module Main characteristics High customization Integrate different types of inputs/ outputs Up to 40 total channels DIN rail mount or plate Main applications Climatic chambers Autoclaves
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
No-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
Electronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
Temperature Input Module for Zone 1 Series 9482/32
www.stahl.de > 8 channels for temperature sensors > Intrinsically safe inputs Ex ia > For Pt-, Ni- and Cu-resistance temperature detectors according to DIN, IEC and GOST in 2-, 3- and 4-wire circuits >
Primary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
Technical Information RMA42
TI00150R/09/EN/05.16 71315973 Products Solutions Services Technical Information RMA42 Process transmitter with control unit Digital process transmitter for monitoring and visualizing analog measured values
02/11/2015
Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.
QAC910. Meteo Sensor. Synco living
2 702 Synco living Meteo Sensor QAC910 Wireless sensor for acquiring outside temperature and atmospheric pressure RF communication based on KNX standard (868 MHz, unidirectional) Battery-powered by commercially
GLB...9. Ball Valve actuators. Building Technologies HVAC Products. for valves VAI61... AC 24 V / AC 230 V
4 657 Ball Valve actuators GLB...9 for valves VAI61... / Electronic motor driven actuators for three-position and modulating control, pre-wired with 0.9 m long connection cables. Remarks This data sheet
IB IL AI 2/SF. Function. INTERBUS Inline Terminal With Two Analog Input Channels. Data Sheet 5564A
INTERBUS Inline Terminal With Two Analog Input Channels Data Sheet 5564A 06/1999 # # $ " ) This data sheet is intended to be used in conjunction with the INTERBUS Inline System Manual IB IL SYS PRO UM
Temperature controller, 4-channel
, 4-channel Subject to technical modification 716218 Identification Type TR-1-6218 4-channel Part-No. 716218 Use/Area of application Description The temperature controller has 4 separate channels. The
Room Temperature Controllers. for heating and cooling systems
3 048 RCU15 Room Temperature Controllers for heating and cooling systems RCU15 Choice of two-position or modulating PI control ON / OFF or PWM outputs for heating and cooling Control depending on room-
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/80/80593914.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
MCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description
Universal current transducer Data sheet 104059_en_05 PHOENIX CONTACT 2011-03-09 1 Description MCR-SL-CUC-...-I and MCR-SL-CUC-...-U active current transducers convert DC, AC, and distorted currents into
Electronic Air / Fuel Ratio Control System
7 871 ISO 9001 Electronic Air / Fuel Ratio Control System RVW20... Electronic control unit - for use with modulating single- and dual-fuel burners - with extended functionality for mechanical air / fuel
Compact room automation stations, BACnet/IP, AC 24 V
Desigo Room Automation Compact room automation stations, BACnet/IP, AC 24 V DXR2.E12P.., DXR2.E12PX.., DXR2.E18.. For building with increased demands placed on functionality and flexibility in Room Automation
MULTIFUNCTION GRAPHICAL UNIT MGU 800
MULTIFUNCTION GRAPHICAL UNIT MGU 800 For display, recording and evaluation of process instruments signals (level, temperature, pressure, etc.) 3.5" TFT display, multi-language menu Variety of possible
High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
Manual triggering of the adaption by pressing the «Adaption» button or with the PC-Tool
echnical data sheet SMA--P Multifunctional damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx. m orque
AC 01.2 HART Technical data Actuator controls
General information AC 01.2 actuator controls for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR type range with interface. Power supply Standard voltages
QPM Series Indoor Air Quality Duct Sensors
Document No. CE1N1962 QPM Series Indoor Air Quality Duct Sensors Description The QPM Series Room Carbon Dioxide (CO 2 ) and Air Quality Duct Sensors are designed for applications where precise, stable
11 VA Connection Cable 1 m, 4 x 0.75 mm 2 Functional data Factory settings Variable Setting Torque (nominal torque) Motor Spring return
echnical data sheet SF24A- Communicative spring return actuator with emergency function for adjusting air dampers in ventilation and air conditioning systems in buildings For air dampers up to approx.
Power supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
Power supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
CALYS 50. Field multifunction calibrator for basic use
Field multifunction calibrator for basic use CALYS 50 field multifunction calibrator is the perfect tool for advanced process maintenance and use on test bench in all industries. Suitable for all field
MCR-C-UI-UI-DCI. Extract from the online catalog. Order No.:
Extract from the online catalog MCR-C-UI-UI-DCI Order No.: 2810913 MCR 3-way isolating amplifier, with configurable I/O, for the electrical isolation of analog signals, with GL approval, preconfigured.
DeltaV SIS Logic Solver
DeltaV SIS Process Safety System Product Data Sheet September 2017 DeltaV SIS Logic Solver World s first smart SIS Logic Solver Integrated, yet separate from the control system Easy compliance with IEC
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Power supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
PART NUMBERING SYSTEM
Plug-In Timer pins Multifunction or monofunction Compact body for space saving Wide time range (from 0. seconds to 0 days delay) niversal power supply (-0 Vz) or relay outputs (SPDT / Changeover) Protective
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/95/123316479.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
NI PXI-2555 Specifications
NI PXI-2555 Specifications 2.5 GHz Terminated 4 x 1 Multiplexer (SP4T) This document lists specifications for the NI PXI-2555 multiplexer module. All specifications are subject to change without notice.
6ES7214-1AG31-0XB0. General information Engineering with. Supply voltage 24 V DC Yes permissible range, upper limit (DC)
6ES7214-1AG31-0XB0 Page 1 Product data sheet 6ES7214-1AG31-0XB0 SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V
Smart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
Rotary actuators for ball valves
4 657 Rotary actuators for ball valves GDB..9E GLB..9E for ball valves VAI61.. / VBI61.. and VAI60.. / VBI60.. / AC 230 V Electromotoric rotary actuators without spring return For 3-position and modulating