SMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
|
|
- Stephen Cameron
- 6 years ago
- Views:
Transcription
1 Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 11.1 V to 104 V V WM 10 V to 85 V P PPM 5000 W T J max. 150 C Polarity Uni-directional Package TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. FEATURES Available in uni-directional polarity only 5000 W peak pulse power capability with a 10/0 μs waveform Excellent clamping capability Very fast response time Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C AEC-Q101 qualified - Automotive ordering code: base P/NHM3 for SMC5K10A to SMC5K20A Material categorization: for definitions of compliance please see MECHANICAL DATA Case: Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test SMC5K22A to SMC5K85A for industrial grade only Polarity: color band denoted cathode end MAXIMUM RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/0 μs waveform (fig. 1) P (1) PPM 5000 W Peak pulse current with a 10/0 μs waveform (fig 3.) I (1) PPM See next table A Operating junction and storage temperature range T J, T STG -55 to +150 C (1) Non-repetitive current pulse, per fig. 3 and derated above T A = 25 C, per fig. 2 Revision: 06-Apr-17 1 Document Number: 87742
2 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN V BR (1) (V) AT I T MAX. TEST CURRENT I T (ma) s (1) Pulse test: t p 50 ms (2) Surge current waveform per fig. 3 and derated per fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 (1) AEC-Q101 qualified, available for SMC5K10A to SMC5K20A only STAND-OFF V WM (V) MAXIMUM REVERSE LEAKAGE AT V WM I D (μa) MAX. PEAK PULSE SURGE CURRENT I PPM (2) (A) MAXIMUM CLAMPING AT I PPM V C (V) SMC5K10A 5GDX SMC5K12A 5GEE SMC5K13A 5GEG SMC5K14A 5GEK SMC5K15A 5GEM SMC5K16A 5GEP SMC5K17A 5GER SMC5K18A 5GET SMC5K20A 5GEV SMC5K22A 5GEX SMC5K24A 5GEZ SMC5K26A 5GFE SMC5K28A 5GFG SMC5K30A 5GFK SMC5K33A 5GFM SMC5K36A 5GFP SMC5K40A 5GFR SMC5K43A 5GFT SMC5K45A 5GFV SMC5K48A 5GFX SMC5K51A 5GFZ SMC5K54A 5GGE SMC5K58A 5GGG SMC5K60A 5GGK SMC5K64A 5GGM SMC5K70A 5GGP SMC5K75A 5GGR SMC5K78A 5GGT SMC5K85A 5GGV IMMUNITY TO STATIC ELECTRICAL DISCHARGE TO THE FOLLOWING STANDARDS (T A = 25 C unless otherwise noted) STANDARD TEST TYPE TEST CONDITIONS SYMBOL CLASS VALUE IEC Human body model (contact mode) Human body model (air discharge mode) ORDERING INFORMATION (Example) C = 150 pf, R = 330 ESD 4 Revision: 06-Apr-17 2 Document Number: > 8 kv > 15 kv PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMC5K10A-M3/H H 850 7" diameter plastic tape and reel SMC5K10A-M3/I I " diameter plastic tape and reel SMC5K10AHM3/H (1) H 850 7" diameter plastic tape and reel SMC5K10AHM3/I (1) I " diameter plastic tape and reel
3 RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) P PPM - Peak Pulse Power (kw) I PPM - Peak Pulse Current, % I RSM t r = 10 μs t d Peak value I PPM T J = 25 C pulse width (t d ) is as the point where the peak current decays to 50 % of I PPM Half value - I PP /2 10/0 μs waveform as t d -Pulse Width (μs) t p -Time (ms) Fig. 1 - Peak Pulse Power Derating Curve Fig. 3 - Pulse Waveform Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage, % C J - Junction Capacitance (pf) Measured at zero bias Measured at stand-off voltage, V WM T J = 25 C f = 1.0 MHz 10 T J - Initial Temperature ( C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature V WM - Reverse Stand-Off Voltage (V) Fig. 4 - Typical Junction Capacitance s Fig.1 - Power calculations is based on I PPM times defined maximum clamping voltage by pulse width Fig μs P PPM is actual test for V WM 60 V types, over 60 V types μs P PPM is curve extensional value Revision: 06-Apr-17 3 Document Number: 87742
4 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Mounting Pad Layout (4.69) MAX (3.20) (2.90) (6.22) (5.59) (3.20) (7.11) (6.60) (0.305) (0.152) (1.52) (2.62) (2.06) REF (1.52) (0.76) (8.13) (7.75) (0.2) 0 (0) Revision: 06-Apr-17 4 Document Number: 87742
5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 90
MSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
More informationSMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationBi-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES
Surface Mount PAR Transient Voltage Suppressors Bi-directional 1500 W TVS in TO-277 (SMPC) Package esmp Series Terminal 1 Terminal 2 FEATURES Junction passivation optimized PAR design T J = 185 C capability
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions SMB (DO-214AA) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM 600 W I FSM
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Top View SlimSMA TM DO-22AC PRIMARY CHARACTERISTICS V BR 6.8 V to 5 V 5.8 V to 43.6 V P PPM (
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationNew Product. High Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSMCG5.0A thru SMCG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 1500 W P D 6.5 W I FSM
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationSA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
More informationSurface-Mount Standard Rectifiers
Surface-Mount Standard Rectifiers esmp Series Top view Bottom view SMF (DO-29AB) PRIMARY CHARACTERISTICS I F(AV) 2.0 A V RRM 200 V, 400 V, 600 V I FSM 35 A V F at I F = 2.0 A (T A = 25 C) 0.85 V I R 5
More informationSurface Mount Standard Rectifiers
Surface Mount Standard Rectifiers Top view esmp Series DO-29AB (SMF) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 200 V, 400 V, 600 V I FSM 25 A V F at I F =.0 A (T A = 25 C) 0.85 V I R 5 μa T J max. 75 C
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V BR 6.8 V to 47 V V WM 5. V to 40.2 V P PPM 10 W I FSM 200 A T J max.
More informationUltrafast Avalanche SMD Rectifier
Ultrafast Avalanche SMD Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.5 A V RRM V I FSM 3 A I R 5. μa t rr 75 ns V F 1.7 V E R 2 mj T J max. 15 C Package Diode variations Single FEATURES Low profile package
More informationHigh Current Density Surface Mount Schottky Barrier Rectifiers
High Current Density Surface Mount Schottky Barrier Rectifiers esmp Series 2 Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Low forward
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.50 V to 36.8 V P PPM 600 W I FSM 75 A T J max.
More informationSurface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 5 V, V, 15 V, 2 V I FSM A t rr 2 ns V F.9 V T J max. 15 C Package Diode variations Single FEATURES Glass passivated
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS esmp Series Top View SlimSMA (DO-22AC) Cathode DESIGN SUPPORT TOOLS Models Available Bottom View PRIMARY CHARACTERISTICS Anode click logo to get
More informationPhotovoltaic Solar Cell Protection Schottky Rectifier
VSB545-M3 Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.33 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency
More informationHigh Current Density Surface Mount Schottky Barrier Rectifiers
SSP3C, SSP4C High Current Density Surface Mount Schottky Barrier Rectifiers esmp Series 2 Anode FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Low forward voltage
More informationHigh Current Density Surface Mount Dual Common Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common Cathode Schottky Rectifier esmp Series K 2 K Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR 7.5 V to 12 V) 3 W P
More informationHigh Current Density Surface Mount Ultrafast Rectifiers
High Current Density Surface Mount Ultrafast Rectifiers esmp Series PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 0 V, 50 V, 200 V t rr 25 ns V F 0.90 V T J max. 75 C Package Diode variations Single die FEATURES
More informationUltrafast Avalanche SMD Rectifier
Ultrafast Avalanche SMD Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.5 A V RRM 1 V I FSM 3 A I R 5. μa t rr 75 ns V F 1.7 V E R 2 mj T J max. 15 C Package Circuit configuration Single FEATURES Low profile
More informationSurface Mount Power Voltage-Regulating Diodes
Surface Mount Power Voltage-Regulating Diodes DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Low Zener impedance Low regulation factor Meets MSL level, per J-STD-2, if maximum
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS SMPA TM Top View Bottom View DO-22BC (SMPA) FEATURES Very low profile - typical height of 0.95 mm Ideal for automated placement Trench MOS Schottky
More informationHigh Current Density Surface Mount High Voltage Schottky Rectifier
High Current Density Surface Mount High Voltage Schottky Rectifier SS8PH9, SS8PH0 FEATURES esmp Series Very low profile - typical height of. mm Available Ideal for automated placement Guardring for overvoltage
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS esmp Series Top View Bottom View SlimSMA (DO-22AC) Cathode Anode FEATURES Very low profile - typical height of 0.95 mm Ideal for automated placement
More informationSurface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV). A V RRM 5 V, V, 5 V, 2 V I FSM 3 A t rr 5 ns V F at I F.92 V T J max. 5 C Package SMA (DO-24AC) Diode variations
More informationFEATURES. PARAMETER SYMBOL V8PAM10 UNIT Device marking code Maximum repetitive peak reverse voltage V RRM 100 V
Surface-Mount TMBS (Trench MOS Barrier Schottky) Rectifier esmp Series Top View Bottom View Anode Cathode FEATURES Very low profile - typical height of 0.95 mm Ideal for automated placement Trench MOS
More informationSurface Mount Schottky Barrier Rectifier
Surface Mount Schottky Barrier Rectifier esmp Series Top view Bottom view DO-29AB (SMF) PRIMARY CHARACTERISTICS I F(AV) 2.0 A V RRM 0 V I FSM 50 A V F at I F = 2.0 A () 0.63 V T J max. 75 C Package DO-29AB
More informationSurface Mount Schottky Barrier Rectifier
Surface Mount Schottky Barrier Rectifier esmp Series Top view Bottom view SMF (DO-219AB) Cathode Anode FEATURES Low profile package Available Ideal for automated placement Low forward voltage drop, low
More informationPhotovoltaic Solar Cell Protection Schottky Rectifier
Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F = 0.30 V at I F = 5.0 A FEATURES TMBS Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation
More informationSurface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier SMC (DO-24AB) PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 4 V, 6 V I FSM 25 A t rr 5 ns V F.5 V T J max. 75 C Package SMC (DO-24AB) Diode variation Single FEATURES
More informationSurface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.0 A V RRM 200 V I FSM 40 A t rr 25 ns V F 0.71 V T J max. 175 C Package Diode variations Single die FEATURES Glass passivated
More informationHigh Current Density Surface Mount Glass Passivated Rectifiers
SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
More informationHigh Current Density Surface Mount High Voltage Schottky Rectifiers
SSPH9, SSPH High Current Density Surface Mount High Voltage Schottky Rectifiers esmp Series 2 Anode Cathode Anode 2 FEATURES Power pack Available Very low profile - typical height of. mm Ideal for automated
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
V40PWM2C High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A TMBS esmp Series 2 SlimDPAK (TO-252AE) PIN K K FEATURES Very low profile - typical
More informationFast Switching Avalanche Surface Mount Rectifiers
Fast Switching Avalanche Surface Mount Rectifiers esmp Series Cathode 2 Anode Anode 2 FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Glass passivated pellet chip
More informationSMD Photovoltaic Solar Cell Protection Rectifier
SMD Photovoltaic Solar Cell Protection Rectifier esmp Series 2 Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement Glass passivated pellet chip junction
More informationSurface Mount Glass Passivated Rectifier
Surface Mount Glass Passivated Rectifier DO-24AC (SMA) PRIMARY CHARACTERISTICS I F(AV) 2.0 A V RRM 200 V, 400 V, 600 V, 800 V, 00 V I FSM 50 A I R 5.0 μa V F at I F = 2.0 A (T A = 25 C) 0.90 V T J max.
More informationUltrafast Avalanche SMD Rectifier
Ultrafast Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV) 2. A V RRM 5 V, V, 2 V I FSM 35 A I R. μa V F at I F. V t rr 25 ns E R 2 mj T J max. 5 C Package SMA (DO-24AC) Diode variations
More informationDual High-Voltage Trench MOS Barrier Schottky Rectifier
V60D0C-M3, V60D0CHM3 Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.36 V at I F = 5 A 2 TMBS esmp Series Top View K PIN V60D0C Bottom View K FEATURES Trench MOS Schottky technology
More informationGlass Passivated Ultrafast Plastic Rectifier
Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit
More informationUltrafast Avalanche Surface Mount Rectifiers
Ultrafast Avalanche Surface Mount Rectifiers esmp Series FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Glass passivated pellet chip junction Fast reverse recovery
More informationFast Avalanche SMD Rectifier
BYG2K-E3/HE3, BYG2M-E3/HE3 Fast Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).5 A V RRM 8 V, V I FSM 3 A I R. μa V F.6 V t rr 2 ns E R 2 mj T J max. 5 C Package SMA (DO-24AC) Diode
More informationSurface Mount Ultrafast Plastic Rectifier
Surface Mount Ultrafast Plastic Rectifier DO-24AB (SMC) PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 3 V, 4 V I FSM A t rr 35 ns V F at I F. V T J max. 5 C Package DO-24AB (SMC) Diode variations Single die
More informationHigh Current Density Surface Mount Dual Common Cathode Schottky Rectifiers
High Current Density Surface Mount Dual Common Cathode Schottky Rectifiers FEATURES esmp Series Very low profile - typical height of. mm Available Ideal for automated placement Low forward voltage drop,
More informationSurface Mount Ultra Fast Rectifier
USA, USB, USD, USG, USJ, USK, USM Surface Mount Ultra Fast Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).0 A 50 V, 0 V, 200 V, 400 V, 600 V, V RRM 800 V, 00 V I FSM 30 A t rr 50 ns, 75 ns V F
More informationUF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier
UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
More informationSurface Mount ESD Capability Rectifiers
Surface Mount ESD Capability Rectifiers Top View SlimSMA DO-22AC PRIMARY CHARACTERISTICS I F(AV) 3.0 A V RRM V, 200 V, 400 V, 600 V I FSM 40 A V F at I F = 3.0 A (T A = 25 C) 0.86 V I R 0 μa T J max. 75
More informationUltrafast Avalanche Surface Mount Rectifiers
Ultrafast Avalanche Surface Mount Rectifiers DESIGN SUPPORT TOOLS Models Available esmp Series PRIMARY CHARACTERISTICS Cathode I F(AV) 2.0 A V RRM 200 V, 400 V, 600 V I FSM 30 A t rr 75 ns E AS 20 mj V
More informationSMD Photovoltaic Solar Cell Protection Schottky Rectifier
SS5P3S SMD Photovoltaic Solar Cell Protection Schottky Rectifier esmp Series Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 5 A V RRM 30 V I FSM 80 A E AS 0 mj V F at I F = 5 A 0.4 V T J max. 50 C
More informationPhotovoltaic Solar Cell Protection Schottky Rectifier
Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.3 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. to 7 V Test current I ZT to 5 ma V BR 9.4 to 5 V V WM 8. to V P PPM 3 W T J max. 5
More informationSMD Photovoltaic Solar Cell Protection Schottky Rectifier
SSP4S SMD Photovoltaic Solar Cell Protection Schottky Rectifier PRIMARY CHARACTERISTICS I F(AV) A V RRM 40 V I FSM 80 A E AS 0 mj V F at I F = A 0.43 V T J max. 50 C Package Diode variations Single die
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification 17249 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.6 to 200 V Test current I ZT 5 to 0 ma V BR 7 to 188 V V WM 6.2 to 160 V P PPM 150 W T
More informationSurface Mount Fast Avalanche Rectifiers
ARPD, ARPG, ARPJ, ARPK, ARPM Surface Mount Fast Avalanche Rectifiers esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS I F(AV). A V RRM 2 V, 4 V, 6 V, 8 V, V I FSM 3 A, 25 A t rr 4 ns, 2 ns V F.5 V,.4
More informationBYG10D, BYG10G, BYG10J, BYG10K, BYG10M, BYG10Y Standard Avalanche SMD Rectifier
BYGD, BYGG, BYGJ, BYGK, BYGM, BYGY Standard Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).5 A 2 V, 4 V, 6 V, 8 V, V RRM V, 6 V I FSM 3 A I R. μa V F.5 V E R 2 mj T J max. 5 C Package
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS SMPA TM Top View Bottom View DO-22BC (SMPA) PRIMARY CHARACTERISTICS I F(AV) 3.0 A V RRM 50 V I FSM 80 A V F at I F = 3.0 A (T A = 25 C) 0.40 V T
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
V5PL50 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.8 V at I F = 5 A TMBS esmp Series Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 5 A V RRM 50 V I
More informationGlass Passivated Junction Plastic Rectifier
N400GP, N4002GP, N4003GP, N4004GP, N4005GP, N4006GP, N4007GP Glass Passivated Junction Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability application
More informationTrench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.33 V at I F = A TMBS 2 VBT6045CBP PIN PIN 2 HEATSIN PRIMARY CHARACTERISTICS I F(AV) 2 x 30 A V RRM 45 V I FSM
More informationSurface Mount Glass Passivated Junction Rectifier
-xxx, GL4x Surface Mount Glass Passivated Junction Rectifier SUPERECTIFIER DO-23AB PRIMARY CHARACTERISTICS I F(AV).0 A V RRM (-xxx, GL4x) 50 V to 00 V, 50 V to 600 V I FSM 30 A I R μa E AS 5 mj V F. V,.2
More informationHigh Voltage Schottky Rectifier
MB0H90, MB0H, MF0H High Voltage Schottky Rectifier High Barrier Technology for Improved High Temperature Performance ITO-220AC D 2 PA (TO-263AB) 2 2 MB0H90 MF0H MB0H PIN PIN PIN 2 PIN 2 HEATSIN PRIMARY
More informationUni-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES
Surface Mount PR Transient Voltage Suppressors Uni-directional 500 W TVS in TO-277 (SMPC) Package esmp Series 2 TO-277 (SMPC) PRIMRY CHRCTERISTICS V WM 5.8 V to 43.6 V V BR 6.8 V to 5 V P PPM 500 W T J
More informationHigh Voltage Ultrafast Avalanche SMD Rectifiers
High Voltage Ultrafast Avalanche SMD Rectifiers PRIMARY CHARACTERISTICS I F(AV) DO-24AC (SMA).0 A FEATURES Glass passivated pellet chip junction Low profile package Ideal for automated placement Low reverse
More informationHigh Current Density Surface Mount Glass Passivated Rectifiers
SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.34 V at I F = 4 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 8.0 A V RRM
More informationSurface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions
Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* *Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AA (SMB) FEATURES Patented PAR
More informationHigh Current Density Surface Mount Dual Common-Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp Series 2 TO-277A (SMPC) Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement
More informationHigh Current Density Surface Mount Dual Common-Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp TM Series 2 TO-277A (SMPC) Anode FEATURES Very low profile - typical height of. mm Ideal for automated placement Low forward
More informationSurface-Mount Glass Passivated Rectifier
Surface-Mount Glass Passivated Rectifier DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS Anode click logo to get started I F(AV).0 A V RRM 400 V,
More informationHyper Fast Rectifier, 2 x 3 A FRED Pt
Hyper Fast Rectifier, 2 x 3 A FRED Pt VS-6DKH2HM3 8 7 6 5 FlatPAK 5 x 6, 2 7, 8 2 3 4 FEATURES Hyper fast recovery time, reduced Q rr, and Available soft recovery 75 C maximum operating junction temperature
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.29 V at I F = 5 A TMBS esmp Series 2 Anode Cathode Anode 2 PRIMARY CHARACTERISTICS I F(AV) 25 A V RRM 60 V I FSM
More informationDual Common Cathode High Voltage Schottky Rectifier
Dual Common Cathode High Voltage Schottky Rectifier High Barrier Technology for Improved High Temperature Performance TO-220AB MBR20HCT PIN PIN 3 PRIMARY CHARACTERISTICS I F(AV) 2 x 0 A V RRM V I FSM 250
More informationHigh Voltage Glass Passivated Junction Plastic Rectifier
High Voltage Glass Passivated Junction Plastic Rectifier SUPERECTIFIER FEATURES Superectifier structure for high reliability application Cavity-free glass-passivated junction Low leakage current High forward
More informationDual Common-Cathode Ultrafast Rectifier
Dual Common-Cathode Ultrafast Rectifier TO-22AB BYV32 Series PIN PIN 3 CASE 2 3 TO-263AB ITO-22AB 2 3 BYVF32 Series PIN PIN 3 2 FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery
More informationUltrafast Avalanche SMD Rectifier
Ultrafast Avalanche SMD Rectifier DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Glass passivated pallet chip junction Low reverse current Low forward voltage Soft recovery characteristic
More informationSchottky Barrier Rectifier
Schottky Barrier Rectifier TO-0AC ITO-0AC FEATURES Power pack Low power loss, high efficiency Low forward voltage drop High forward surge capability High frequency operation CASE D PA (TO-63AB) MBRF045
More informationUltrafast Rectifier FEATURES
Ultrafast Rectifier TO-AC ITO-AC BYW9 Series BYWF9 Series PIN PIN CASE D PA (TO-63AB) BYWB9 Series PIN HEATSIN DESIGN SUPPORT TOOLS click logo to get started FEATURES Power pack Glass passivated pellet
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323
VCAN26A2-3G Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 3 1 2 22742 MARKING (example only) 22743 WW VY ABC ABC = type code (see table below) WW = date code
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23
VCAN26A2-3S Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 FEATURES 3 For CAN and FLEX-Bus applications Small SOT-23 package AEC-Q1 qualified available 1 2 22742
More information