PHYS 1020 LAB 7: LENSES AND OPTICS. Pre-Lab
|
|
- Claud Terry
- 6 years ago
- Views:
Transcription
1 PHYS 1020 LAB 7: LENSES AND OPTICS Note: Print and complete the separate pre-lab assignment BEFORE the lab. Hand it in at the start of the lab. Pre-Lab Start by reading the entire prelab and lab write-up. When a light ray strikes a smooth surface separating two transparent materials (like air, glass, or water), the wave is both partially reflected from the surface and partly refracted (or transmitted) into the second material. Start by downloading and opening the PhET sim you will be using: Analysis: 1) What do you notice about the angle of the reflected light in comparison with the angle of the incident light? (Note that there is a protractor on the PhET sim that you can use to measure angles!) 2) Now let s look at the refracted light. In general, the relationship between the angles of refracted light and a property of the media is given by: n 1 sin( 1 ) = n 2 sin( 2 ) or Here corresponds to the angle in the top medium and to the angle in the bottom medium. Both of these angles are measured from the z-axis down to the light (or up to the light in the media below). Similarly, n 1 and n 2 are the indices of refraction of the top and bottom material, respectively. (These numbers are shown on the PhET sim.) Now find a way to verify the relation given above on the PhET sim. You will want to take at least three data points at either different angles or different indices of refraction (you get to choose which!) or you may want to do both. Show all of your work in doing this and give a brief (2-3 sentences) description of the method you used to complete this problem. Additional Questions: 1. What is the definition of the focal length of a lens of curved mirror? 2. What does is mean for an image to be real? For an image to be virtual?
2 Lab 7: Lenses and Optics Lab Logistics: (continuous reminder) You and your group will work together to complete the lab. Remember, everyone will need to assume a different role from last week. For instance, if you were the manager last week, then you should either be the recorder or the skeptic for this lab. Again, everyone should be helping with the hands-on stuff. Again if you are part of a group of two, you should be switching each week who is the manager and who is the recorder. NO ONE SHOULD BE RECORDER TWO LABS IN A ROW. The manager: This person is responsible for making sure that the group follows the lab procedure and completes everything that is asked for in the lab. The collector recorder: This person is responsible for keeping the lab notebook for the day, recording the observations observed by the group and the group s answers to the questions asked in the lab. The skeptic: This person is there to question the results of the lab. Is everything making sense? Are we taking the data correctly? Are the results and conclusions reasonable? Did we skip a step? Begin each lab report by titling the lab, listing your lab partners who are present, and listing the jobs that each lab partner has assumed for the lab. Remember, your lab report should give an explanation of all of your observations and measurements. Also, you need to think of and try one additional experiment for either Part 1, 2, or 3 of this lab that will further test your explanation of the results that you found. (If time permits) Lab Description: Lenses are the basis for many modern optical instruments, such as microscopes, telescopes, cameras and eyeglasses. In this experiment you will work with two lenses. You will measure their focal lengths in several ways and study the magnification (how much the image of the object is smaller or larger than the object itself). Finally, you will use both of them to measure the chromatic aberrations (differences between how the lens bends red light and how it bends blue light) of one of the lenses. The main properties of any thin lens are summarized by the thin lens equation: (1) In this equation, f is the focal length of the lens and is positive for converging lenses (which you will be using in this experiment) and negative for diverging lenses. As shown in Fig. 1, d o is the distance from the object to the lens, and is positive for real objects (which is all that will be considered for this lab). Similarly, d i is the distance from the image to the lens and is positive for real images (as in Fig. 1) but negative for virtual images. (For example, a single diverging lens will always produce a virtual image from a real object, why?)
3 d o h o Image Object F F h i d i Fig. 1. The distances d o and d i that appear in the lens equation, illustrated for the case of a real image produced by a converging lens. The two points labeled F are the focal points of the lens. Part I: Focal lengths and Magnification factors The first part of this lab is to find the focal length of lens A by measuring values d i and d o and using eq. (1) to calculate the focal length. 1) Use the lighted object and lens A to create an image of the object (in focus) on the frosted glass screen. Is the image larger, smaller or the same size as the object? 2) For lens A, make three sets of measurements of d o, d i, h i and h o. h o is the height of the object and h i is the height of the image. Between each set adjust the distance between the object and the lens. Make sure you have at least one measurement where the image is smaller than the object and one where it is bigger than the object. Using the lens equation above, find the focal length, f, for lens A in each case. Estimate your uncertainty and discuss how you got it. 3) In Fig. 1, the image is smaller than the object. Using Fig. 1 as a model, draw a similar sketch which shows the object location and light rays that would form an image larger than the object. Your drawing should show the lens, the focal point of the lens, the object location, the rays coming off one point on the object and where the image will be formed by those rays. Note in Fig. 1 the light rays shown are coming from the object passing through the lens and where they cross they will form the image in focus. The three rays drawn are special since we know how they will bend using the following guidelines: a. When light rays come in parallel to the axis of the lens, they are bent by the lens such that they pass through the focal point.
4 b. Rays that pass through the focal point of the lens before hitting the lens are bent by the lens such that they exit parallel to the axis of the lens. c. Rays that pass through the very center of the lens exit the lens going in the same direction they were going originally. 4) As you bring the object closer and closer to the lens does the image get smaller or larger? At what distance will the lens no longer create an image in focus? Why? Make sure you make a prediction before you try it. 5) With the image in focus on the frosted glass screen, where do you think the image will be located if you place the object at the current location of the screen? Explain your thinking. Test it. 6) Use your measurements of the sizes, h i and h o, of the image and object to compute the magnification of the object for one of the measurements you made: Referring to Fig. 1 and using the fact that with similar triangles (all the angles are the same) the ratio of the sides are also the same (e.g., d i /h i =d o /d i ), you can see that M is also equal to Check the agreement between the two expressions for M by using your measurements. (So, if you know the image and object distances, you know the magnification!) Did you verify this? Part II: Alternative Method to determine focal length The second part of this experiment is to measure the focal length for both lenses. 1) How can you arrange a lens and a point source so that the rays that are coming out are parallel to one another? Use lens A and the point source (remove the arrow cover) so that the rays are coming out of the lens are all parallel as in Fig. 2. Recreate Fig. 2 being careful to identify where the 2 focal points are. point source Lens diameter beam diameter (D) f
5 Fig. 2. When a converging lens produces a parallel beam of light we say the light is collimated. This happens when the source is at the lens s focal point (d o = f). You can check that the light is collimated by seeing if the diameter, D, of the beam at points far from the lens is equal to the diameter of the lens itself. 2) Measure the distance from the point source to the lens. Is it equal to f A, the focal length of lens A, you measured in part I? Does it match your prediction for how you would need to arrange the point source and lens so that all the exiting rays were parallel? 3) Now place lens B in the collimated beam produced by lens A as in Fig. 3. Since the light rays approach B travelling parallel, the object distance for B is infinite and the image distance should be the focal length of B. What is the focal length for lens B? A Collimated beam B Dist to image = focal len. of B Fig. 3. Using a collimated beam to measure f B Part III: Chromatic Aberrations (Color matters) Still using the point source of light, you can study the chromatic aberration of lenses A and B. Chromatic aberration (slight differences in the lens s focusing properties for different colors or frequencies of light) occurs in all but the most expensive lenses (which are not made from a single material and are actually more than one lens combined into one). 1) Set your lenses up as shown in Fig. 3. Use a white piece of paper to closely examine the light beam as it focuses to a point. Locate the focus point and then move the piece of paper back and forth so that you can see the rays converging to the point and then diverging again once they pass through the point. What do you notice about the color/hue of the outer most ring of the light circle? Is it the same when the rays ar converging and diverging? Record your observations. 2) What do your observations tell you about how much the lenses are bending red light vs. how much they are bending blue light? Use a drawing to back up your claim. Recall that the amount of bending depends on the difference in the speed of light between the air and the glass. Both red light and blue light travel more slowly in glass than in air, but are they traveling the same speed in the glass?
6 Given your observations which one travels more slowly in glass? (Check your reasoning with your TA). Hint: remember the concrete/sand (or mud) interface to infer how the amount of bending depends on the difference in speed as the trucks (light) go from air to the glass and the glass back to air. Basically what is happening is that the glass bends light of different wavelengths (colors, frequencies) by slightly different amounts which is equivalent to saying the light of different wavelengths travels at slightly different speeds through the glass. This phenomenon is put to good use in a prism when one wants to disperse the different colors of white light. It is also the cause for a rainbow. 3) For a given lens the focal length for red light (f red ) is a little different from that for blue light (f blue ). Which is larger: f blue or f red? Is the difference large? Additional Experiment Think up an additional experiment using the equipment from this lab and try it, recording the results in your lab book. Additional Question A diverging lens does not produce a real image from a real object. How would you determine the focal length of a diverging lens? You can use additional lens if needed.
CHAPTER 18 REFRACTION & LENSES
Physics Approximate Timeline Students are expected to keep up with class work when absent. CHAPTER 18 REFRACTION & LENSES Day Plans for the day Assignments for the day 1 18.1 Refraction of Light o Snell
More informationPhysics Learning Guide Name:
Physics Learning Guide Name: Instructions: Using a pencil, complete the following notes as you work through the related lessons. Show ALL work as is explained in the lessons. You are required to have this
More informationName. Light Chapter Summary Cont d. Refraction
Page 1 of 17 Physics Week 12(Sem. 2) Name Light Chapter Summary Cont d with a smaller index of refraction to a material with a larger index of refraction, the light refracts towards the normal line. Also,
More informationGeneral Physics II. Ray Optics
General Physics II Ray Optics 1 Dispersion White light is a combination of all the wavelengths of the visible part of the electromagnetic spectrum. Red light has the longest wavelengths and violet light
More informationRefraction, Lenses, and Prisms
CHAPTER 16 14 SECTION Sound and Light Refraction, Lenses, and Prisms KEY IDEAS As you read this section, keep these questions in mind: What happens to light when it passes from one medium to another? How
More informationLab 11: Lenses and Ray Tracing
Name: Lab 11: Lenses and Ray Tracing Group Members: Date: TA s Name: Materials: Ray box, two different converging lenses, one diverging lens, screen, lighted object, three stands, meter stick, two letter
More informationCH. 23 Mirrors and Lenses HW# 6, 7, 9, 11, 13, 21, 25, 31, 33, 35
CH. 23 Mirrors and Lenses HW# 6, 7, 9, 11, 13, 21, 25, 31, 33, 35 Mirrors Rays of light reflect off of mirrors, and where the reflected rays either intersect or appear to originate from, will be the location
More informationVideo. Part I. Equipment
1 of 7 11/8/2013 11:32 AM There are two parts to this lab that can be done in either order. In Part I you will study the Laws of Reflection and Refraction, measure the index of refraction of glass and
More informationPHY170: OPTICS. Things to do in the lab INTRODUCTORY REMARKS OPTICS SIMULATIONS
INTRODUCTORY REMARKS PHY170: OPTICS The optics experiments consist of two major parts. Setting up various components and performing the experiments described below. Computer simulation of images generated
More informationBasic Optics System OS-8515C
40 50 30 60 20 70 10 80 0 90 80 10 20 70 T 30 60 40 50 50 40 60 30 70 20 80 90 90 80 BASIC OPTICS RAY TABLE 10 0 10 70 20 60 50 40 30 Instruction Manual with Experiment Guide and Teachers Notes 012-09900B
More informationMirrors, Lenses &Imaging Systems
Mirrors, Lenses &Imaging Systems We describe the path of light as straight-line rays And light rays from a very distant point arrive parallel 145 Phys 24.1 Mirrors Standing away from a plane mirror shows
More informationChapter 29/30. Wave Fronts and Rays. Refraction of Sound. Dispersion in a Prism. Index of Refraction. Refraction and Lenses
Chapter 29/30 Refraction and Lenses Refraction Refraction the bending of waves as they pass from one medium into another. Caused by a change in the average speed of light. Analogy A car that drives off
More informationLenses. A transparent object used to change the path of light Examples: Human eye Eye glasses Camera Microscope Telescope
SNC2D Lenses A transparent object used to change the path of light Examples: Human eye Eye glasses Camera Microscope Telescope Reading stones used by monks, nuns, and scholars ~1000 C.E. Lenses THERE ARE
More informationReadings: Hecht, Chapter 24
5. GEOMETRIC OPTICS Readings: Hecht, Chapter 24 Introduction In this lab you will measure the index of refraction of glass using Snell s Law, study the application of the laws of geometric optics to systems
More informationNORTHERN ILLINOIS UNIVERSITY PHYSICS DEPARTMENT. Physics 211 E&M and Quantum Physics Spring Lab #8: Thin Lenses
NORTHERN ILLINOIS UNIVERSITY PHYSICS DEPARTMENT Physics 211 E&M and Quantum Physics Spring 2018 Lab #8: Thin Lenses Lab Writeup Due: Mon/Wed/Thu/Fri, April 2/4/5/6, 2018 Background In the previous lab
More informationChapter 23. Mirrors and Lenses
Chapter 23 Mirrors and Lenses Mirrors and Lenses The development of mirrors and lenses aided the progress of science. It led to the microscopes and telescopes. Allowed the study of objects from microbes
More informationChapter 18 Optical Elements
Chapter 18 Optical Elements GOALS When you have mastered the content of this chapter, you will be able to achieve the following goals: Definitions Define each of the following terms and use it in an operational
More informationOptics Practice. Version #: 0. Name: Date: 07/01/2010
Optics Practice Date: 07/01/2010 Version #: 0 Name: 1. Which of the following diagrams show a real image? a) b) c) d) e) i, ii, iii, and iv i and ii i and iv ii and iv ii, iii and iv 2. A real image is
More informationAP Physics Problems -- Waves and Light
AP Physics Problems -- Waves and Light 1. 1974-3 (Geometric Optics) An object 1.0 cm high is placed 4 cm away from a converging lens having a focal length of 3 cm. a. Sketch a principal ray diagram for
More informationEXPERIMENT 10 Thin Lenses
Objectives ) Measure the power and focal length of a converging lens. ) Measure the power and focal length of a diverging lens. EXPERIMENT 0 Thin Lenses Apparatus A two meter optical bench, a meter stick,
More informationPhysics II. Chapter 23. Spring 2018
Physics II Chapter 23 Spring 2018 IMPORTANT: Except for multiple-choice questions, you will receive no credit if you show only an answer, even if the answer is correct. Always show in the space on your
More informationThis experiment is under development and thus we appreciate any and all comments as we design an interesting and achievable set of goals.
Experiment 7 Geometrical Optics You will be introduced to ray optics and image formation in this experiment. We will use the optical rail, lenses, and the camera body to quantify image formation and magnification;
More informationPHYS 160 Astronomy. When analyzing light s behavior in a mirror or lens, it is helpful to use a technique called ray tracing.
Optics Introduction In this lab, we will be exploring several properties of light including diffraction, reflection, geometric optics, and interference. There are two sections to this lab and they may
More informationName: Lab Partner: Section:
Chapter 10 Thin Lenses Name: Lab Partner: Section: 10.1 Purpose In this experiment, the formation of images by concave and convex lenses will be explored. The application of the thin lens equation and
More informationLO - Lab #05 - How are images formed from light?
LO - Lab #05 - Helpful Definitions: The normal direction to a surface is defined as the direction that is perpendicular to a surface. For example, place this page flat on the table and then stand your
More informationNotation for Mirrors and Lenses. Chapter 23. Types of Images for Mirrors and Lenses. More About Images
Notation for Mirrors and Lenses Chapter 23 Mirrors and Lenses Sections: 4, 6 Problems:, 8, 2, 25, 27, 32 The object distance is the distance from the object to the mirror or lens Denoted by p The image
More informationPhys 102 Lecture 21 Optical instruments
Phys 102 Lecture 21 Optical instruments 1 Today we will... Learn how combinations of lenses form images Thin lens equation & magnification Learn about the compound microscope Eyepiece & objective Total
More informationRefraction is the when a ray changes mediums. Examples of mediums:
Refraction and Lenses Refraction is the when a ray changes mediums. Examples of mediums: Lenses are optical devices which take advantage of the refraction of light to 1. produces images real and 2. change
More informationTest Review # 8. Physics R: Form TR8.17A. Primary colors of light
Physics R: Form TR8.17A TEST 8 REVIEW Name Date Period Test Review # 8 Light and Color. Color comes from light, an electromagnetic wave that travels in straight lines in all directions from a light source
More information10.2 Images Formed by Lenses SUMMARY. Refraction in Lenses. Section 10.1 Questions
10.2 SUMMARY Refraction in Lenses Converging lenses bring parallel rays together after they are refracted. Diverging lenses cause parallel rays to move apart after they are refracted. Rays are refracted
More informationPHYSICS 289 Experiment 8 Fall Geometric Optics II Thin Lenses
PHYSICS 289 Experiment 8 Fall 2005 Geometric Optics II Thin Lenses Please look at the chapter on lenses in your text before this lab experiment. Please submit a short lab report which includes answers
More informationChapter 23. Mirrors and Lenses
Chapter 23 Mirrors and Lenses Notation for Mirrors and Lenses The object distance is the distance from the object to the mirror or lens Denoted by p The image distance is the distance from the image to
More informationChapter 26. The Refraction of Light: Lenses and Optical Instruments
Chapter 26 The Refraction of Light: Lenses and Optical Instruments 26.1 The Index of Refraction Light travels through a vacuum at a speed c=3. 00 10 8 m/ s Light travels through materials at a speed less
More informationLAB 12 Reflection and Refraction
Cabrillo College Physics 10L Name LAB 12 Reflection and Refraction Read Hewitt Chapters 28 and 29 What to learn and explore Please read this! When light rays reflect off a mirror surface or refract through
More informationLab 2 Geometrical Optics
Lab 2 Geometrical Optics March 22, 202 This material will span much of 2 lab periods. Get through section 5.4 and time permitting, 5.5 in the first lab. Basic Equations Lensmaker s Equation for a thin
More informationConverging and Diverging Surfaces. Lenses. Converging Surface
Lenses Sandy Skoglund 2 Converging and Diverging s AIR Converging If the surface is convex, it is a converging surface in the sense that the parallel rays bend toward each other after passing through the
More informationInstructions. To run the slideshow:
Instructions To run the slideshow: Click: view full screen mode, or press Ctrl +L. Left click advances one slide, right click returns to previous slide. To exit the slideshow press the Esc key. Optical
More informationExperiment 7. Thin Lenses. Measure the focal length of a converging lens. Investigate the relationship between power and focal length.
Experiment 7 Thin Lenses 7.1 Objectives Measure the focal length of a converging lens. Measure the focal length of a diverging lens. Investigate the relationship between power and focal length. 7.2 Introduction
More informationPart 1 Investigating Snell s Law
Geometric Optics with Lenses PURPOSE: To observe the refraction of light off through lenses; to investigate the relationship between objects and images; to study the relationship between object distance,
More informationCh 24. Geometric Optics
text concept Ch 24. Geometric Optics Fig. 24 3 A point source of light P and its image P, in a plane mirror. Angle of incidence =angle of reflection. text. Fig. 24 4 The blue dashed line through object
More informationLaboratory 7: Properties of Lenses and Mirrors
Laboratory 7: Properties of Lenses and Mirrors Converging and Diverging Lens Focal Lengths: A converging lens is thicker at the center than at the periphery and light from an object at infinity passes
More informationConverging Lenses. Parallel rays are brought to a focus by a converging lens (one that is thicker in the center than it is at the edge).
Chapter 30: Lenses Types of Lenses Piece of glass or transparent material that bends parallel rays of light so they cross and form an image Two types: Converging Diverging Converging Lenses Parallel rays
More informationAlgebra Based Physics. Reflection. Slide 1 / 66 Slide 2 / 66. Slide 3 / 66. Slide 4 / 66. Slide 5 / 66. Slide 6 / 66.
Slide 1 / 66 Slide 2 / 66 Algebra Based Physics Geometric Optics 2015-12-01 www.njctl.org Slide 3 / 66 Slide 4 / 66 Table of ontents lick on the topic to go to that section Reflection Refraction and Snell's
More informationmirrors and lenses PHY232 Remco Zegers Room W109 cyclotron building
mirrors and lenses PHY232 Remco Zegers zegers@nscl.msu.edu Room W109 cyclotron building http://www.nscl.msu.edu/~zegers/phy232.html quiz (extra credit) a ray of light moves from air to a material with
More informationPhysics 11. Unit 8 Geometric Optics Part 2
Physics 11 Unit 8 Geometric Optics Part 2 (c) Refraction (i) Introduction: Snell s law Like water waves, when light is traveling from one medium to another, not only does its wavelength, and in turn the
More informationLab 10: Lenses & Telescopes
Physics 2020, Fall 2010 Lab 8 page 1 of 6 Circle your lab day and time. Your name: Mon Tue Wed Thu Fri TA name: 8-10 10-12 12-2 2-4 4-6 INTRODUCTION Lab 10: Lenses & Telescopes In this experiment, you
More informationChapter 23. Light Geometric Optics
Chapter 23. Light Geometric Optics There are 3 basic ways to gather light and focus it to make an image. Pinhole - Simple geometry Mirror - Reflection Lens - Refraction Pinhole Camera Image Formation (the
More informationPhy Ph s y 102 Lecture Lectur 21 Optical instruments 1
Phys 102 Lecture 21 Optical instruments 1 Today we will... Learn how combinations of lenses form images Thin lens equation & magnification Learn about the compound microscope Eyepiece & objective Total
More informationLecture Outline Chapter 27. Physics, 4 th Edition James S. Walker. Copyright 2010 Pearson Education, Inc.
Lecture Outline Chapter 27 Physics, 4 th Edition James S. Walker Chapter 27 Optical Instruments Units of Chapter 27 The Human Eye and the Camera Lenses in Combination and Corrective Optics The Magnifying
More informationChapter 2 - Geometric Optics
David J. Starling Penn State Hazleton PHYS 214 The human eye is a visual system that collects light and forms an image on the retina. The human eye is a visual system that collects light and forms an image
More informationSpherical Mirrors. Concave Mirror, Notation. Spherical Aberration. Image Formed by a Concave Mirror. Image Formed by a Concave Mirror 4/11/2014
Notation for Mirrors and Lenses Chapter 23 Mirrors and Lenses The object distance is the distance from the object to the mirror or lens Denoted by p The image distance is the distance from the image to
More informationPhysics 1202: Lecture 19 Today s Agenda
Physics 1202: Lecture 19 Today s Agenda Announcements: Team problems today Team 12: Kervell Baird, Matthew George, Derek Schultz Team 13: Paxton Stowik, Stacey Ann Burke Team 14: Gregory Desautels, Benjamin
More informationImage Formation by Lenses
Image Formation by Lenses Bởi: OpenStaxCollege Lenses are found in a huge array of optical instruments, ranging from a simple magnifying glass to the eye to a camera s zoom lens. In this section, we will
More informationThin Lenses. Lecture 25. Chapter 23. Ray Optics. Physics II. Course website:
Lecture 25 Chapter 23 Physics II Ray Optics Thin Lenses Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsii Lecture Capture: http://echo360.uml.edu/danylov201415/physics2spring.html
More informationLENSES. a. To study the nature of image formed by spherical lenses. b. To study the defects of spherical lenses.
Purpose Theory LENSES a. To study the nature of image formed by spherical lenses. b. To study the defects of spherical lenses. formation by thin spherical lenses s are formed by lenses because of the refraction
More informationPhysics 2020 Lab 8 Lenses
Physics 2020 Lab 8 Lenses Name Section Introduction. In this lab, you will study converging lenses. There are a number of different types of converging lenses, but all of them are thicker in the middle
More informationLens: Lenses are usually made of and have 2 curved surfaces. Draw figure 5.23 on Page 191. Label it clearly and use a ruler for the light rays.
5.3 Lenses We have seen lenses in our microscopes, cameras or eyeglasses. Lens: Lenses are usually made of and have 2 curved surfaces. Concave lens: A lens curved inward Thinner at the centre than at the
More informationOption G 2: Lenses. The diagram below shows the image of a square grid as produced by a lens that does not cause spherical aberration.
Name: Date: Option G 2: Lenses 1. This question is about spherical aberration. The diagram below shows the image of a square grid as produced by a lens that does not cause spherical aberration. In the
More informationGeometrical Optics. Have you ever entered an unfamiliar room in which one wall was covered with a
Return to Table of Contents HAPTER24 C. Geometrical Optics A mirror now used in the Hubble space telescope Have you ever entered an unfamiliar room in which one wall was covered with a mirror and thought
More informationREFLECTION THROUGH LENS
REFLECTION THROUGH LENS A lens is a piece of transparent optical material with one or two curved surfaces to refract light rays. It may converge or diverge light rays to form an image. Lenses are mostly
More informationComplete the diagram to show what happens to the rays. ... (1) What word can be used to describe this type of lens? ... (1)
Q1. (a) The diagram shows two parallel rays of light, a lens and its axis. Complete the diagram to show what happens to the rays. (2) Name the point where the rays come together. (iii) What word can be
More informationHome Lab 5 Refraction of Light
1 Home Lab 5 Refraction of Light Overview: In previous experiments we learned that when light falls on certain materials some of the light is reflected back. In many materials, such as glass, plastic,
More informationDr. Todd Satogata (ODU/Jefferson Lab) Monday, April
University Physics 227N/232N Mirrors and Lenses Homework Optics 2 due Friday AM Quiz Friday Optional review session next Monday (Apr 28) Bring Homework Notebooks to Final for Grading Dr. Todd Satogata
More informationLaboratory 12: Image Formation by Lenses
Phys 112L Spring 2013 Laboratory 12: Image Formation by Lenses The process by which convex lenses produce images can be described with reference to the scenario illustrated in Fig. 1. An object is placed
More information30 Lenses. Lenses change the paths of light.
Lenses change the paths of light. A light ray bends as it enters glass and bends again as it leaves. Light passing through glass of a certain shape can form an image that appears larger, smaller, closer,
More informationAlgebra Based Physics. Reflection. Slide 1 / 66 Slide 2 / 66. Slide 3 / 66. Slide 4 / 66. Slide 5 / 66. Slide 6 / 66.
Slide 1 / 66 Slide 2 / 66 lgebra ased Physics Geometric Optics 2015-12-01 www.njctl.org Slide 3 / 66 Slide 4 / 66 Table of ontents lick on the topic to go to that section Reflection Refraction and Snell's
More informationii) When light falls on objects, it reflects the light and when the reflected light reaches our eyes then we see the objects.
Light i) Light is a form of energy which helps us to see objects. ii) When light falls on objects, it reflects the light and when the reflected light reaches our eyes then we see the objects. iii) Light
More informationCh. 18 Notes 3/28/16
Section 1 Light & Color: Vocabulary Transparent material: transmits most of the light that strikes it. Light passes through without being scattered, so you can see clearly what is on the other side. Ex.
More informationChapter 23. Mirrors and Lenses
Chapter 23 Mirrors and Lenses Notation for Mirrors and Lenses The object distance is the distance from the object to the mirror or lens Denoted by p The image distance is the distance from the image to
More informationThe Law of Reflection
PHY132H1F Introduction to Physics II Class 5 Outline: Reflection and Refraction Fibre-Optics Colour and Dispersion Thin Lens Equation Image Formation Quick reading quiz.. virtual image is. the cause of
More informationChapter 23. Geometrical Optics: Mirrors and Lenses and other Instruments
Chapter 23 Geometrical Optics: Mirrors and Lenses and other Instruments HITT 1 You stand two feet away from a plane mirror. How far is it from you to your image? a. 2.0 ft b. 3.0 ft c. 4.0 ft d. 5.0 ft
More informationPhysics 208 Spring 2008 Lab 2: Lenses and the eye
Name Section Physics 208 Spring 2008 Lab 2: Lenses and the eye Your TA will use this sheet to score your lab. It is to be turned in at the end of lab. You must use complete sentences and clearly explain
More informationRefraction and Lenses
Refraction and Lenses Name Q.(a) Figure shows a ray of light entering a glass block. (i) The angle of incidence in Figure is labelled with the letter i. On Figure, use the letter r to label the angle of
More information2015 EdExcel A Level Physics EdExcel A Level Physics. Lenses
2015 EdExcel A Level Physics 2015 EdExcel A Level Physics Topic Topic 5 5 Lenses Types of lenses Converging lens bi-convex has two convex surfaces Diverging lens bi-concave has two concave surfaces Thin
More informationChapter 28. Reflection and Refraction
Chapter 28 Reflection and Refraction Light takes the path from one point to another that is a. quickest. b. shortest. c. closest to a straight line. d. None of these. Light takes the path from one point
More informationSnell s Law, Lenses, and Optical Instruments
Physics 4 Laboratory Snell s Law, Lenses, and Optical Instruments Prelab Exercise Please read the Procedure section and try to understand the physics involved and how the experimental procedure works.
More informationUnit 2: Optics Part 2
Unit 2: Optics Part 2 Refraction of Visible Light 1. Bent-stick effect: When light passes from one medium to another (for example, when a beam of light passes through air and into water, or vice versa),
More informationMirrors and Lenses. Images can be formed by reflection from mirrors. Images can be formed by refraction through lenses.
Mirrors and Lenses Images can be formed by reflection from mirrors. Images can be formed by refraction through lenses. Notation for Mirrors and Lenses The object distance is the distance from the object
More informationGeometric Optics. PSI AP Physics 2. Multiple-Choice
Geometric Optics PSI AP Physics 2 Name Multiple-Choice 1. When an object is placed in front of a plane mirror the image is: (A) Upright, magnified and real (B) Upright, the same size and virtual (C) Inverted,
More informationTest Review # 9. Physics R: Form TR9.15A. Primary colors of light
Physics R: Form TR9.15A TEST 9 REVIEW Name Date Period Test Review # 9 Light and Color. Color comes from light, an electromagnetic wave that travels in straight lines in all directions from a light source
More informationLenses. Optional Reading Stargazer: the life and times of the TELESCOPE, Fred Watson (Da Capo 2004).
Lenses Equipment optical bench, incandescent light source, laser, No 13 Wratten filter, 3 lens holders, cross arrow, diffuser, white screen, case of lenses etc., vernier calipers, 30 cm ruler, meter stick
More informationFinal Reg Optics Review SHORT ANSWER. Write the word or phrase that best completes each statement or answers the question.
Final Reg Optics Review 1) How far are you from your image when you stand 0.75 m in front of a vertical plane mirror? 1) 2) A object is 12 cm in front of a concave mirror, and the image is 3.0 cm in front
More information2010 Catherine H. Crouch. Lab I - 1
The following laboratories were developed by Catherine Crouch at Swarthmore College for Physics 4L (Electricity, Magnetism, and Optics with Biomedical Applications) drawing on problem-solving laboratories
More informationGEOMETRICAL OPTICS Practical 1. Part I. BASIC ELEMENTS AND METHODS FOR CHARACTERIZATION OF OPTICAL SYSTEMS
GEOMETRICAL OPTICS Practical 1. Part I. BASIC ELEMENTS AND METHODS FOR CHARACTERIZATION OF OPTICAL SYSTEMS Equipment and accessories: an optical bench with a scale, an incandescent lamp, matte, a set of
More informationApplied Optics. , Physics Department (Room #36-401) , ,
Applied Optics Professor, Physics Department (Room #36-401) 2290-0923, 019-539-0923, shsong@hanyang.ac.kr Office Hours Mondays 15:00-16:30, Wednesdays 15:00-16:30 TA (Ph.D. student, Room #36-415) 2290-0921,
More informationGeometric Optics. Find the focal lengths of lenses and mirrors; Draw and understand ray diagrams; and Build a simple telescope
Geometric Optics I. OBJECTIVES Galileo is known for his many wondrous astronomical discoveries. Many of these discoveries shook the foundations of Astronomy and forced scientists and philosophers alike
More informationChapter 36. Image Formation
Chapter 36 Image Formation Real and Virtual Images Real images can be displayed on screens Virtual Images can not be displayed onto screens. Focal Length& Radius of Curvature When the object is very far
More informationPhysics 142 Lenses and Mirrors Page 1. Lenses and Mirrors. Now for the sequence of events, in no particular order. Dan Rather
Physics 142 Lenses and Mirrors Page 1 Lenses and Mirrors Now or the sequence o events, in no particular order. Dan Rather Overview: making use o the laws o relection and reraction We will now study ormation
More informationRefraction is the change in speed of a wave due to the wave entering a different medium. light travels at different speeds in different media
Refraction Refraction is the change in speed of a wave due to the wave entering a different medium light travels at different speeds in different media this causes light to bend as it passes from one substance
More informationP202/219 Laboratory IUPUI Physics Department THIN LENSES
THIN LENSES OBJECTIVE To verify the thin lens equation, m = h i /h o = d i /d o. d o d i f, and the magnification equations THEORY In the above equations, d o is the distance between the object and the
More informationUNIT SUMMARY: Electromagnetic Spectrum, Color, & Light Name: Date:
UNIT SUMMARY: Electromagnetic Spectrum, Color, & Light Name: Date: Topics covered in the unit: 1. Electromagnetic Spectrum a. Order of classifications and respective wavelengths b. requency, wavelength,
More informationc v n = n r Sin n c = n i Refraction of Light Index of Refraction Snell s Law or Refraction Example Problem Total Internal Reflection Optics
Refraction is the bending of the path of a light wave as it passes from one material into another material. Refraction occurs at the boundary and is caused by a change in the speed of the light wave upon
More informationWaves & Oscillations
Physics 42200 Waves & Oscillations Lecture 27 Geometric Optics Spring 205 Semester Matthew Jones Sign Conventions > + = Convex surface: is positive for objects on the incident-light side is positive for
More informationSNC2D PHYSICS 5/25/2013. LIGHT & GEOMETRIC OPTICS L Converging & Diverging Lenses (P ) Curved Lenses. Curved Lenses
SNC2D PHYSICS LIGHT & GEOMETRIC OPTICS L Converging & Diverging Lenses (P.448-450) Curved Lenses We see the world through lenses even if we do not wear glasses or contacts. We all have natural lenses in
More informationReflection and Refraction of Light
Reflection and Refraction of Light Physics 102 28 March 2002 Lecture 6 28 Mar 2002 Physics 102 Lecture 6 1 Light waves and light rays Last time we showed: Time varying B fields E fields B fields to create
More informationPHYSICS OPTICS. Mr Rishi Gopie
OPTICS Mr Rishi Gopie Ray Optics II Images formed by lens maybe real or virtual and may have different characteristics and locations that depend on: i) The type of lens involved, whether converging or
More information=, where f is focal length of a lens (positive for convex. Equations: Lens equation
Physics 1230 Light and Color : Exam #1 Your full name: Last First & middle General information: This exam will be worth 100 points. There are 10 multiple choice questions worth 5 points each (part 1 of
More information28 Thin Lenses: Ray Tracing
28 Thin Lenses: Ray Tracing A lens is a piece of transparent material whose surfaces have been shaped so that, when the lens is in another transparent material (call it medium 0), light traveling in medium
More information13. Optical Instruments*
13. Optical Instruments* Objective: Here what you have been learning about thin lenses is applied to make a telescope. In the process you encounter general optical instrument design concepts. The learning
More informationPHYSICS. Chapter 35 Lecture FOR SCIENTISTS AND ENGINEERS A STRATEGIC APPROACH 4/E RANDALL D. KNIGHT
PHYSICS FOR SCIENTISTS AND ENGINEERS A STRATEGIC APPROACH 4/E Chapter 35 Lecture RANDALL D. KNIGHT Chapter 35 Optical Instruments IN THIS CHAPTER, you will learn about some common optical instruments and
More information