Stela+ gen2 the revolution continues

Transcription

1 Lighting Stela+ gen2 the revolution continues Stela Round is at the forefront of LED technology in street lighting. The REVOLED cooling and light distribution concept enables tremendous energy savings and a corresponding reduction in CO2 emissions, whilst meeting current lighting standards. Excellent thermal management of the LEDs ensures a very long lifetime, eliminating the need for lamp replacement and resulting in a very attractive Total Cost of Ownership. The introduction of the latest-generation LED and programmable drivers and the possibility of employing Constant Light Output (CLO) in gen2 enable a further reduction in power consumption. Benefits REVOLED technology for maximum efficiency Fit-and-forget solution operates at low current Very attractive Total Cost of Ownership, ensuring sustainable investment Features Guaranteed long lifetime: up to 100,000 hours (L-Tune tool) Low energy consumption and small carbon footprint Easy installation and maintenance Application Traffic routes: parking areas Residential: streets, footpaths, squares/parks and playgrounds, parking areas City centers: side streets, squares and parks, pedestrian and shopping areas, public transport, footpaths, parking areas Large outdoor areas: industrial sites, harbors, airports, waterways, rail yards Specifications Type BPP610 Power (+/-10%) W depending on product Light source Integral LED-module Luminous flux ,350 lm

2 Luminaire efficacy lm/w Correlated 3000, 4000 or 5700 K Temperature Rendering Index Cool white: 70 Neutral white: 75 Warm white: 80 Maintenance of lumen 100,000 hours at Ta = 25 ºC output - L85/F10 Driver failure rate 0,5 per 1000 hours Operating temperature -20 to +35 ºC range Driver Integrated programmable driver Mains voltage V / Hz Inrush current 40 W: 65 A at 100 ms 75 W: 80 A at 150 ms 100 W: 80 A at 150 ms 150 W: 118 A at 140 ms Dimming Dimmable versions available with: 1-10V / DALI / DynaDimmer / SDU Options Optic Optical cover Material Connection Maintenance Installation Cable gland Accessories Including cable Class II version Wired for cell, Mini Photocell or NEMA socket Constant light output (CLO) 10 kv surge protection Wide road and wide area Micro lens optic Housing: die-cast aluminum LM6-quality, non corrosive Spigot: die-cast aluminum LM6-quality Lens: PMMA Grey (Futura Gris 900 Sablé) Other RAL or AKZO Futura colors available on request Screw connection block Easy driver maintenance Recommended mounting height: 4-5 m Post-top mounting: axial entry Ø mm (76P) Windage area: m² M20 Adapter for Ø 60mm post top Versions Stela Round+ gen2 BPP610/611 pedestrian luminaire Product details with 12 LEDs with 18 LEDs 2

3 Product details with 24 LEDs with 36 LEDs with 48 LEDs Top view Gear tray in standard compartment with clip Standard electronic driver for all versions Special 75 and 150 W driver for 36 and 48 LEDs versions at current 700 ma 3

4 Approval and Application Mech. impact protection code IK10 General Information Luminaire light beam spread 154 x 118 CE mark CE mark Light source color Neutral white Optical cover/lens type Polymethyl methacrylate bowl/ cover Driver included Yes ENEC mark - Flammability mark - Light source replaceable No Number of gear units 1 unit Optic type Wide road optic for S-class Application Conditions Maximum dim level BPP /NW PSU WRN BPP /NW PSU WRN BPP611 24x /NW PSU II WRN BPP611 36x /NW PSU II WRN BPP611 GRN69/NW PSD WRN GR D9 SRG % Initial Performance (IEC Compliant) Init. Corr. Temperature Init. Rendering Index 4000 K 70 Light Technical Standard tilt angle side entry - Standard tilt angle posttop 0 Upward light output ratio 0 Mechanical and Housing Gray Approval and Application Surge Protection (Common/Differential) BPP /NW PSU WRN Luminaire surge protection level until 6 kv differential mode and 6 kv common mode BPP /NW PSU WRN Luminaire surge protection level until 6 kv differential mode and 6 kv common mode BPP611 24x /NW PSU II WRN Surge Protection (Common/Differential) BPP611 36x /NW PSU II WRN BPP611 GRN69/NW PSD WRN GR D9 SRG Controls and Dimming Dimmable BPP /NW PSU WRN No BPP /NW PSU WRN No BPP611 24x /NW PSU II WRN No Dimmable BPP611 36x /NW PSU II WRN No BPP611 GRN69/NW PSD WRN GR D9 SRG Yes General Information (1/2) 4

5 Luminaire Luminaire choice Coating Finish fixation bolts choice Coating Finish fixation bolts BPP /NW PSU Gray Gris Single layer Matte Length 20 mm BPP611 36x /NW PSU II WRN 900 Sablé WRN BPP611 GRN69/NW PSD - Single layer Matte BPP /NW PSU Gray Gris Single layer Matte Length 20 mm WRN GR D9 SRG WRN 900 Sablé BPP611 24x /NW PSU II WRN General Information (2/2) Product Product Lamp family Number of Family Lamp family Number of Family code light sources Code code light sources Code BPP /NW PSU WRN XP-G2 12 pcs BPP BPP611 36x /NW PSU II WRN XP-G2 - BPP BPP /NW PSU WRN XP-G2 18 pcs BPP BPP611 GRN69/NW PSD WRN GRN69 - BPP611 GR D9 SRG BPP611 24x /NW PSU II WRN XP-G2 - BPP611 Initial Performance (IEC Compliant) Initial luminous flux BPP /NW PSU WRN 1305 lm BPP /NW PSU WRN 1980 lm BPP611 24x /NW PSU II WRN 3200 lm Initial luminous flux BPP611 36x /NW PSU II WRN 5000 lm BPP611 GRN69/NW PSD WRN GR D9 SRG lm Light Technical Light source flux BPP /NW PSU WRN 1450 lm BPP /NW PSU WRN 2200 lm BPP611 24x /NW PSU II WRN - Light source flux BPP611 36x /NW PSU II WRN BPP611 GRN69/NW PSD WRN GR D9 SRG Philips Lighting Holding B.V. All rights reserved. Philips Lighting reserves the right to make changes in specifications and/or to discontinue any product at any timewithout notice or obligation and will not be liable for any consequences resulting from the use of this publication , March 13 -