Jean LE BESNERAIS 26/09/ EOMYS ENGINEERING / /
|
|
- Isabel Barker
- 5 years ago
- Views:
Transcription
1 Fast calculation of acoustic noise and vibrations due to magnetic forces during basic and detailed design stages of electrical machines using MANATEE software Jean LE BESNERAIS 26/09/18
2 What is electromagnetic Noise, Vibration, Harshness (e-nvh)? noise and vibrations coming from variable electromagnetic forces forces arising from the presence of a variable magnetic field : Maxwell & magnetostriction 1. variable current source 2. rotating permanent magnet 3. rotating DC current source Always present in: Induction Machines (IM) Switched Reluctance Machines (SRM) Permanent Magnet Synchronous Machines (PMSM) Wound Rotor Synchronous Machines (WRSM) Synchro Reluctance Machines (SyRM) Only present in PM-based motors I=constant Only present in WRSM Tesla SCIM [R1] Toyota Prius IPMSM [R1] Renault Zoe - WRSM Renault Zoe - WRSM 2
3 Example of an EV electric powertrain NVH: Renault ZOE = + + Overall noise Aerodynamic & mechanical noise Source separation done with LEA software [R4] Slot/pole interaction electromagnetic noise Pulse Width Modulation electromagnetic noise
4 Electromagnetic Vs Noise, Vibration, Harshness (NVH) design of e-motors Cost optimization -> thinner yoke -> higher vibrations and acoustic noise Concentrated winding design -> higher Maxwell force harmonic content -> higher risk of resonances Torque ripple is not correlated to acoustic noise Skewing can increase torque ripple and/or acoustic noise at some operating points Slot/pole combination can give 40 db difference at same torque output level: from normal conversation to (diesel-powered) lawn mower +40 db sound power level db Effect of rotor slot number on maximum noise of an induction motor using MANATEE software Electric motor designers have now to run vibro-acoustic analysis along with electromagnetic & heat transfer analysis
5 MANATEE software solutions MANATEE simulation software can be used for the electromagnetic design optimization of electrical machines including the analysis of magnetic vibrations and acoustic noise due to Maxwell forces: fast NVH calculation due to Maxwell forces during early electromagnetic design loops optimized NVH calculation in detailed design phase (automated coupling with numerical CAD models) over full operating range («noise maps») advanced post-processing for NVH root-cause analysis design optimization environments of e-motor noise mitigation techniques stator/rotor skewing pole/slot shaping current injection stator/rotor notching randomized PWM 5
6 MANATEE integration in NVH workflow MANATEE is the central point for the integrated Noise, Vibration, Harshness design process of electric powertrains (e-nvh), from basic vibro-acoustic design at e-motor level to detailed vibro-acoustic design at system level: Third-party electromagnetic design tools Third-party sound quality / psychoacoustics tools Jmag Standalone e-motor NVH solution (electromagnetics +vibro-acoustics) HeadAcoustics Third-party structural design tools Third-party NVH data acquisition tools Ansys Third-party gearbox NVH design tools Third-party acoustic design tools Oros v1.07 coupling v1.08 coupling Masta Actran
7 MANATEE demonstration: Toyota Prius 2004 case Objectives: quickly identify motor whine potential issues using MANATEE software Reference article: Z. Yang, et al., Electromagnetic and vibrational characteristic of IPM over full torquespeed range, IEMDC Proceedings, 2015 [R2] [R2] is based on Ansys workbench simulation, requiring several hours of simulation although acoustic noise is not calculated Conclusions of [R2]: potential resonances between H48 (48 times mechanical frequency) and H96 and breathing mode of the stack close to 3000 and 6000 rpm at open circuit; H24 appears at partial load but does not create significant resonance H96 H48 H24 From [R2] From [R2] 7
8 MANATEE demonstration: electrical machine definition 8
9 MANATEE demonstration: set-up of the electromagnetic model Option 1: 2,5D ANALYTICAL PERMEANCE / MMF MODEL User-defined airgap flux distribution Phase current waveforms Option 2: 2,5D SEMI-ANALYTICAL SUBDOMAIN MODEL Airgap time and space flux distribution Option 3: 2,5D FINITE ELEMENT MODEL (FEMM) Used in this demo 9
10 MANATEE demonstration: set-up of the magnetic force model MAGNETIC FORCE CALCULATION, PROJECTION AND 2D FFT r=0 r=2 r=3 Airgap time and space flux distribution Option 1: Lumped magnetic load vectors Used in this demo Option 2: Surface magnetic force densities Stator and rotor nodal or lumped Maxwell harmonic forces and moments Torque ripple Option 3: Virtual Work Principle nodal magnetic forces 10
11 MANATEE demonstration: set-up of the structural model User defined natural frequencies (e.g. experimental data) Natural frequencies automatically calculated by FEM on a 3D model Option 1: 2,5D ANALYTICAL CYLINDER MODEL Natural frequencies of the circumferential modes of an equivalent ring Dynamic radial deflections Maxwell harmonic forces and moments Static radial deflections Used in this demo Dynamic radial deflections Option 2: 3D FINITE ELEMENT STRUCTURAL MODEL Optistruct/Ansys/Nastran (commercial) or GetDP (free) S=Enveloppe fermée Vibration synthesis of radial deflections FRF calculation of main force wavenumbers 11
12 MANATEE demonstration: set-up of the acoustic model Option 1: SEMI-ANALYTICAL ACOUSTIC MODEL Radiation efficiency of an equivalent cylinder Dynamic radial deflections 2D (analytical) or 3D (FEM) spatial-averaged vibration velocity Used in this demo Sound power level Sound pressure level Option 2: NUMERICAL ACOUSTIC MODEL* Sound synthesis.wav *available in MANATEE v
13 MANATEE demonstration: set-up of the simulation workflow 13
14 MANATEE demonstration: NVH post-processing and interpretations 12f s (H48) 24f s (H96) tuto_ipmsm_01 Ansys-based results from [R2] are found within a few seconds of calculation 14
15 MANATEE demonstration: from open-circuit to partial load 6f s (H24) tuto_ipmsm_03 Ansys-based results from [R2] are found within a few seconds of calculation The breathing mode of the stack is driving noise radiation as in most EV/HEV [R3] 15
16 MANATEE demonstration: structural calculation refinement with Electromagnetic Vibration Synthesis CALCULATION OF OPERATIONAL LOADS STRUCTURAL CHARACTERIZATION ELECTROMAGNETIC MODEL 3D airgap flux distribution MANATEE 2,5D electromagnetic models (SDM, PMMF, FEMM) 2D or 3D external FEA software (e.g. Flux, Jmag, Maxwell, Magnet) Unit rotating loads identified with MANATEE r=0, ±2, ±3 STRUCTURAL MODEL Outer yoke velocity field r=0 HARMONIC FORCE PROJECTION r=2 r=3 Tangential and radial harmonic magnetic forces (magnitude, wavenumber, frequency, phase) Complex FRFs (radial & tangential) for each force wavenumber r STRUCTURAL FREQUENCY RESPONSE FUNCTIONS r=0 r=2 ELECTROMAGNETIC VIBRATION SYNTHESIS Vibration and noise spectrum with modal participation MANATEE 2,5D structural model 3D external FEA software (e.g. Optistruct, Ansys, Nastran)
17 MANATEE demonstration: structural calculation refinement with Electromagnetic Vibration Synthesis Possibility to calculate FRF using an existing FEA model or building automatically a concept stator (orthotropic, winding mass, ideal boundary conditions): tuto_ipmsm_20 12f s (H48) 24f s (H96) Automatic set-up of Prius concept stator under Ansys Updated MANATEE spectrogram based on Ansys FRF
18 Examples of MANATEE industrial validation cases Case of a traction concentrated winding PMSM with interior magnets at partial load (blind test): TESTS MANATEE -40 db Motor B Motor A Sound level during a run-up (experiments with gearbox+watercooling+converter harmonics) Sound level during a run-up (MANATEE simulation without converter harmonics) ~10 sec on a laptop Fast electromagnetic models neglecting saturation can be used in early design phase to avoid strong resonances, no need of multiphysic full numerical models
19 Case of a railway squirrel cage traction induction machine with Sound Power Level measurements according ISO3745 in semi-anechoic chamber: TESTS Sound power level during runup (including fan noise) MANATEE Sound power level during a run-up (without air cooling) ~2 sec on a laptop Fast vibroacoustic model neglecting 3D effects can be used in basic design phase to avoid strong resonances, no need of multiphysic full numerical models
20 Case of a salient pole synchronous hydroelectric generator with damper bars TESTS MANATEE 2 resonances Sound level during a run-up Sound level during a run-up ~10 sec on a laptop Fast vibroacoustic model neglecting 3D effects can be used in basic design phase to avoid strong resonances, no need of detailed multiphysic numerical models
21 Case of a traction distributed winding PMSM with interior magnets at partial load: overall SPL avg 3 micros Sound level during a run-up (experiments in non ideal acoustic conditions) Sound level during a run-up (MANATEE simulation, linear subdomain) ~10 sec on a standard PC Sound level during a run-up (MANATEE, coupling with non linear FEMM) ~5 hours on a standard PC Fast electromagnetic models neglecting saturation effects can be used in basic design phase to avoid strong resonances, no need of detailed multiphysic numerical models
22 Conclusions MANATEE is the only software specialized in the assessment of magnetic forces, magnetic vibrations and acoustic noise at variable speed, which has been extensively validated with industrial cases MANATEE gives physical insights on e-nvh, combining efficient noise troubleshooting and noise mitigation tools MANATEE can be used in pre-sizing and detailed e-machine design workflows, providing accelerated simulation times compared to a direct coupling approach contact@eomys.com r=0 r=1 r=2 =
23 REFERENCES [R1] Z. Q. Zhu Advanced Electrical Machine Technologies for Electric and Hybrid Electric Vehicle Applications - A Comparative Study, EVER Conference, 2015 [R2] Z. Yang, M. Krishnamurthy and I. P. Brown, "Electromagnetic and vibrational characteristic of IPM over full torque-speed range," 2013 International Electric Machines & Drives Conference, Chicago, IL, 2013 [R3] A. Hofmann, F. Qi, T. Lange and R. W. De Doncker, "The breathing mode-shape 0: Is it the main acoustic issue in the PMSMs of today's electric vehicles?," th International Conference on Electrical Machines and Systems (ICEMS), Hangzhou, 2014 [R4] J. Le Besnerais, C. Dendievel, Sound quality optimization of electric powertrains for e-mobility applications, CFA (French Congress on Acoustics) Proceedings, 2017
Noise & vibrations due to magnetic forces in electrical machines
Noise & vibrations due to magnetic forces in electrical machines Root cause analysis and mitigation using MANATEE software The webinar will start soon. Please check your audio/video settings (mute your
More informationACOUSTIC NOISE AND VIBRATIONS DUE TO MAGNETIC FORCES IN ROTATING ELECTRICAL MACHINES
TECHNICAL TRAINING TTR01 ACOUSTIC NOISE AND VIBRATIONS DUE TO MAGNETIC FORCES IN ROTATING ELECTRICAL MACHINES 1 OBJECTIVES The objectives of the full technical training including all option modules are
More informationACOUSTIC NOISE AND VIBRATIONS OF ELECTRIC POWERTRAINS
ACOUSTIC NOISE AND VIBRATIONS OF ELECTRIC POWERTRAINS Focus on electromagnetically-excited NVH for automotive applications and EV/HEV Part 4 NVH experimental characterization of electric chains LE BESNERAIS
More informationACOUSTIC NOISE AND VIBRATIONS OF ELECTRIC POWERTRAINS
ACOUSTIC NOISE AND VIBRATIONS OF ELECTRIC POWERTRAINS Focus on electromagnetically-excited NVH for automotive applications and EV/HEV Part 2 Characterization of electromagnetic NVH in electric motors LE
More informationAnalysis of the electromagnetic acoustic noise and vibrations of a high-speed brushless DC motor
Analysis of the electromagnetic acoustic noise and vibrations of a high-speed brushless DC motor J. Le Besnerais, Q. Souron, E. Devillers EOMYS ENGINEERING, www.eomys.com 1 A. Introduction Square-wave-driven
More informationMANATEE SIMULATION SOFTWARE Magnetic Acoustic Noise Analysis Tool for Electrical Engineering
MANATEE SIMULATION SOFTWARE Magnetic Acoustic Noise Analysis Tool for Electrical Engineering Presentation of MANATEE software (v1.05) developed and distributed by EOMYS (www.eomys.com) I. PRESENTATION
More informationNOISE AND VIBRATIONS IN ELECTRIC MACHINES
NOISE AND VIBRATIONS IN ELECTRIC MACHINES Review of NVH sources & mitigation of electromagnetically-excited noise LE BESNERAIS Jean REGNIEZ Margaux 21 th September 2017 www.eomys.com contact@eomys.com
More informationCharacterization of acoustic noise and vibrations due to magnetic forces in induction machines for transport applications using MANATEE software
Characterization of acoustic noise and vibrations due to magnetic forces in induction machines for transport applications using MANATEE software E.Devillers 1,2, J. Le Besnerais 1, Q. Souron 1, M. Hecquet
More informationNVH analysis of a 3 phase 12/8 SR motor drive for HEV applications
NVH analysis of a 3 phase 12/8 SR motor drive for HEV applications Mathieu Sarrazin 1, Steven Gillijns 1, Jan Anthonis 1, Karl Janssens 1, Herman van der Auweraer 1, Kevin Verhaeghe 2 1 LMS, a Siemens
More informationOverview of IAL Software Programs for the Calculation of Electrical Drive Systems
for the Calculation of Electrical Drive Systems Combines FEM with analytical post-processing analytical Machine type Topic Electrically excited Salientpole rotor Synchronous machines Cylindrical rotor
More informationAnalysis of the electromagnetic acoustic noise and vibrations of a high-speed brushless DC motor
Analysis of the electromagnetic acoustic noise and vibrations of a high-speed brushless DC motor J. Le Besnerais*, Q. Souron*, E. Devillers** *EOMYS ENGINEERING, www.eomys.com ** L2EP, Ecole Centrale Lille,
More informationContents. About the Authors. Abbreviations and Symbols
About the Authors Preface Abbreviations and Symbols xi xiii xv 1 Principal Laws and Methods in Electrical Machine Design 1 1.1 Electromagnetic Principles 1 1.2 Numerical Solution 9 1.3 The Most Common
More informationElectromagnetic Force Coupling in Electric Machines Mark Solveson, Cheta Rathod, Mike Hebbes, Gunjan Verma, Tushar Sambharam ANSYS, Inc.
Electromagnetic Force Coupling in Electric Machines Mark Solveson, Cheta Rathod, Mike Hebbes, Gunjan Verma, Tushar Sambharam ANSYS, Inc. 1 ANSYS, Inc. September 29, Introduction Low noise regulation Aimed
More informationA METHOD FOR A MODAL MEASUREMENT OF ELECTRICAL MACHINES
A METHOD FOR A MODAL MEASUREMENT OF ELECTRICAL MACHINES PACS: 43.40.At Sebastian Fingerhuth 1 ; Roman Scharrer 1 ; Knut Kasper 2 1) Institute of Technical Acoustics RWTH Aachen University Neustr. 50 52066
More informationOptimization of rotor shape for constant torque improvement and radial magnetic force minimization
DOI: 10.1007/s11771 01 101 7 Optimization of rotor shape for constant torque improvement and radial magnetic force minimization CHO Gyu-won, WOO Seok-hyun, JI Seung-hun, PARK Kyoung-won, JANG Ki-bong,
More informationEEE, St Peter s University, India 2 EEE, Vel s University, India
Torque ripple reduction of switched reluctance motor drives below the base speed using commutation angles control S.Vetriselvan 1, Dr.S.Latha 2, M.Saravanan 3 1, 3 EEE, St Peter s University, India 2 EEE,
More informationInvestigation of Magnetic Field and Radial Force Harmonics in a Hydrogenerator Connected to a Three-Level NPC Converter
Investigation of Magnetic Field and Radial Force Harmonics in a Hydrogenerator Connected to a Three-Level NPC Converter Mostafa Valavi, Arne Nysveen, and Roy Nilsen Department of Electric Power Engineering
More informationELECTRIC MACHINES MODELING, CONDITION MONITORING, SEUNGDEOG CHOI HOMAYOUN MESHGIN-KELK AND FAULT DIAGNOSIS HAMID A. TOLIYAT SUBHASIS NANDI
ELECTRIC MACHINES MODELING, CONDITION MONITORING, AND FAULT DIAGNOSIS HAMID A. TOLIYAT SUBHASIS NANDI SEUNGDEOG CHOI HOMAYOUN MESHGIN-KELK CRC Press is an imprint of the Taylor & Francis Croup, an informa
More informationNoise and Vibration in PM Motors Sources and Remedies
Noise and Vibration in PM Motors Sources and Remedies 1 A typical Rubber Ferrite Magnet Iso / Anisotropic Iso Iso Remanence Coercive Force Intrinsic Coercive Force Max. Energy Product Br Hcb Hcj (BH)max
More informationA Study on Distributed and Concentric Winding of Permanent Magnet Brushless AC Motor
Volume 118 No. 19 2018, 1805-1815 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu ijpam.eu A Study on Distributed and Concentric Winding of Permanent Magnet
More informationFinite Element Analysis of Cogging Torque in Low Speed Permanent Magnets Wind Generators
Finite Element Analysis of Cogging Torque in Low Speed Permanent Magnets Wind Generators T. Tudorache, L. Melcescu, M. Popescu, M Cistelecan University POLITEHNICA of Bucharest, Electrical Engineering
More informationSensorless Control of a Novel IPMSM Based on High-Frequency Injection
Sensorless Control of a Novel IPMSM Based on High-Frequency Injection Xiaocan Wang*,Wei Xie**, Ralph Kennel*, Dieter Gerling** Institute for Electrical Drive Systems and Power Electronics,Technical University
More informationKey Factors for the Design of Synchronous Reluctance Machines with Concentrated Windings
IEEE PEDS 27, Honolulu, USA 2 5 December 27 Key Factors for the Design of Synchronous Reluctance Machines with Concentrated Windings Tobias Lange, Claude P. Weiss, Rik W. De Doncker Institute for Power
More informationBahram Amin. Induction Motors. Analysis and Torque Control. With 41 Figures and 50 diagrams (simulation plots) Springer
Bahram Amin Induction Motors Analysis and Torque Control With 41 Figures and 50 diagrams (simulation plots) Springer 1 Main Parameters of Induction Motors 1.1 Introduction 1 1.2 Structural Elements of
More informationDESIGN STUDY OF LOW-SPEED DIRECT-DRIVEN PERMANENT-MAGNET MOTORS WITH CONCENTRATED WINDINGS
1 DESIGN STUDY OF LOW-SPEED DIRECT-DRIVEN PERMANENT-MAGNET MOTORS WITH CONCENTRATED WINDINGS F. Libert, J. Soulard Department of Electrical Machines and Power Electronics, Royal Institute of Technology
More informationUnequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings
Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings Ilya Petrov, Pavel Ponomarev, Yulia Alexandrova, Juha Pyrhönen, LUT
More informationSYNCHRONOUS MACHINES
SYNCHRONOUS MACHINES The geometry of a synchronous machine is quite similar to that of the induction machine. The stator core and windings of a three-phase synchronous machine are practically identical
More informationElectromagnetic and thermal model for Brushless PM motors
22 December 2017 Motor-CAD Software Tutorial: Electromagnetic and thermal model for Brushless PM motors Contents 1. Description... 1 2. Model Definition... 2 3. Machine Geometry... 3 4. Winding Definition...
More informationUnbalance Detection in Flexible Rotor Using Bridge Configured Winding Based Induction Motor
Unbalance Detection in Flexible Rotor Using Bridge Configured Winding Based Induction Motor Natesan Sivaramakrishnan, Kumar Gaurav, Kalita Karuna, Rahman Mafidur Department of Mechanical Engineering, Indian
More informationControl of Electric Machine Drive Systems
Control of Electric Machine Drive Systems Seung-Ki Sul IEEE 1 PRESS к SERIES I 0N POWER ENGINEERING Mohamed E. El-Hawary, Series Editor IEEE PRESS WILEY A JOHN WILEY & SONS, INC., PUBLICATION Contents
More informationCombined analytical and FEM method for prediction of synchronous generator no-load voltage waveform
Combined analytical and FEM method for prediction of synchronous generator no-load voltage waveform 1. INTRODUCTION It is very important for the designer of salient pole synchronous generators to be able
More information1 INTRODUCTION 2 MODELLING AND EXPERIMENTAL TOOLS
Investigation of Harmonic Emissions in Wound Rotor Induction Machines K. Tshiloz, D.S. Vilchis-Rodriguez, S. Djurović The University of Manchester, School of Electrical and Electronic Engineering, Power
More information1249. Development of large salient-pole synchronous machines by using fractional-slot concentrated windings
1249. Development of large salient-pole synchronous machines by using fractional-slot concentrated windings Tayfun Gundogdu 1, Guven Komurgoz 2 Istanbul Technical University, Department of Electrical Engineering,
More informationOPTIMUM DESIGN ASPECTS OF A POWER AXIAL FLUX PMSM
OPTIMUM DESIGN ASPECTS OF A POWER AXIAL FLUX PMSM PAUL CURIAC 1 Key words: High-energy permanent magnets, Permanent magnet synchronous machines, Finite element method analysis. The paper presents an axial
More informationThis is a repository copy of Novel modular switched reluctance machines for performance improvement.
This is a repository copy of Novel modular switched reluctance machines for performance improvement. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/124847/ Version: Accepted
More informationAnalysis of Losses in High Speed Slotless PM Synchronous Motor Integrated the Added Leakage Inductance
International Conference on Power Electronics and Energy Engineering (PEEE 2015) Analysis of Losses in High Speed Slotless PM Synchronous Motor Integrated the Added Leakage Inductance B.Q. Kou, H.C. Cao
More informationPermanent Magnet Machine Can Be a Vibration Sensor for Itself M. Barański
Permanent Magnet Machine Can Be a Vibration Sensor for Itself M. Barański Abstract This article presents a new vibration diagnostic method designed to (PM) machines with permanent magnets. Those devices
More informationWe are IntechOpen, the first native scientific publisher of Open Access books. International authors and editors. Our authors are among the TOP 1%
We are IntechOpen, the first native scientific publisher of Open Access books 33 15, 1.7 Mio Open access books available International authors and editors Downloads Our authors are among the 151 Countries
More informationNew Experimental Method for Switching Noise of Motors
EVS28 KINTEX, Korea, May 3-6, 2015 New Experimental Method for Switching Noise of Motors Hyunsu Kim 1, Myunggyu Kim 2 1 Research & Development Division, Hyundai Motor Company 2 Research & Development Division,
More informationChallenges and Solutions for IPMSM to be Used as a Next Generation Electrical Machine
Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, January 22 24, 2011 Challenges and Solutions for IPMSM to be Used as a Next
More informationPlacement Paper For Electrical
Placement Paper For Electrical Q.1 The two windings of a transformer is (A) conductively linked. (B) inductively linked. (C) not linked at all. (D) electrically linked. Ans : B Q.2 A salient pole synchronous
More informationEvaluation of a New Dual-Rotor Hybrid Excitation Brushless Motor
Progress In Electromagnetics Research C, Vol. 86, 233 245, 2018 Evaluation of a New Dual-Rotor Hybrid Excitation Brushless Motor Libing Jing *, Jia Cheng, Qixing Gao, Ting Zhang, and Ying Lin Abstract
More informationSynchronous Reluctance Machine: Combined Star-Delta Winding and Rotor Eccentricity
Synchronous Reluctance Machine: Combined Star-Delta Winding and Rotor Eccentricity Bishal Silwal, Mohamed N. Ibrahim, and Peter Sergeant Φ Abstract A permanent magnet assisted synchronous reluctance machine
More informationRotor Structure Selections of Nonsine Five-Phase Synchronous Reluctance Machines for Improved Torque Capability
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 36, NO. 4, JULY/AUGUST 2000 1111 Rotor Structure Selections of Nonsine Five-Phase Synchronous Reluctance Machines for Improved Torque Capability Longya
More informationMohammad Sedigh Toulabi. A thesis submitted in partial fulfillment of the requirements for the degree of. Doctor of Philosophy.
Wide Speed Range Operation of Concentrated Winding Interior Permanent Magnet Synchronous Machines by Mohammad Sedigh Toulabi A thesis submitted in partial fulfillment of the requirements for the degree
More informationResearch of Radial Forces and Torque of Bearingless Synchronous Machine
Environment. Technology. Resources, Rezekne, Latvia Proceedings of the 10 th International Scientific and Practical Conference. Volume I, 128-132 Research of Radial Forces and Torque of Bearingless Synchronous
More informationSR Motor Design with Reduced Torque Ripple. George H. Holling
SR Motor Design with Reduced Torque Ripple George H. Holling Overview Motivation Review of SRM Theory of Operation Theory of Operation Mathematical Analysis Definition of the SRM s Base Speed SRM s Torque
More information3.1.Introduction. Synchronous Machines
3.1.Introduction Synchronous Machines A synchronous machine is an ac rotating machine whose speed under steady state condition is proportional to the frequency of the current in its armature. The magnetic
More informationIntroduction : Design detailed: DC Machines Calculation of Armature main Dimensions and flux for pole. Design of Armature Winding & Core.
Introduction : Design detailed: DC Machines Calculation of Armature main Dimensions and flux for pole. Design of Armature Winding & Core. Design of Shunt Field & Series Field Windings. Design detailed:
More informationMotor-CAD Brushless PM motor Combined electromagnetic and thermal model (February 2015)
Motor-CAD Brushless PM motor Combined electromagnetic and thermal model (February 2015) Description The Motor-CAD allows the machine performance, losses and temperatures to be calculated for a BPM machine.
More informationThe Study of Demagnetization of the Magnetic Orientation of Permanent Magnets for IPMSM with Field-Weakening Control under Hot Temperature
Journal of Electrical Engineering 6 (2018) 144-150 doi: 10.17265/2328-2223/2018.03.002 D DAVID PUBLISHING The Study of Demagnetization of Magnetic Orientation of Permanent Magnets for Noriyoshi Nishiyama
More informationRare-Earth-Less Motor with Field Poles Excited by Space Harmonics
Rare-Earth-Less Motor with Field Poles Excited by Space Harmonics Theory of Self-Excitation and Magnetic Circuit Design Masahiro Aoyama Toshihiko Noguchi Department of Environment and Energy System, Graduate
More informationCOLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING ACADEMIC YEAR / EVEN SEMESTER QUESTION BANK
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING ACADEMIC YEAR 2010-2011 / EVEN SEMESTER QUESTION BANK SUBJECT CODE & NAME: EE 1352 - ELECTRICAL MACHINE DESIGN YEAR / SEM
More informationTHE UNIVERSITY OF BRITISH COLUMBIA. Department of Electrical and Computer Engineering. EECE 365: Applied Electronics and Electromechanics
THE UNIVERSITY OF BRITISH COLUMBIA Department of Electrical and Computer Engineering EECE 365: Applied Electronics and Electromechanics Final Exam / Sample-Practice Exam Spring 2008 April 23 Topics Covered:
More informationEfficiency Optimized Brushless DC Motor Drive. based on Input Current Harmonic Elimination
Efficiency Optimized Brushless DC Motor Drive based on Input Current Harmonic Elimination International Journal of Power Electronics and Drive System (IJPEDS) Vol. 6, No. 4, December 2015, pp. 869~875
More informationThe Association of Loudspeaker Manufacturers & Acoustics International presents. Dr. David R. Burd
The Association of Loudspeaker Manufacturers & Acoustics International presents Dr. David R. Burd Manager of Engineering and Technical Support Free Field Technologies an MSC Company Tutorial Actran for
More informationPerformance evaluation of fractional-slot tubular permanent magnet machines with low space harmonics
ARCHIVES OF ELECTRICAL ENGINEERING DOI 10.1515/aee-2015-0049 VOL. 64(4), pp. 655-668 (2015) Performance evaluation of fractional-slot tubular permanent magnet machines with low space harmonics Jiabin Wang
More informationThis is a repository copy of Acoustic noise radiated by PWM-controlled induction machine drives.
This is a repository copy of Acoustic noise radiated by PWM-controlled induction machine drives. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/891/ Article: Lo, W.C., Chan,
More informationElectromagnetically-excited noise mitigation techniques of electric motors used in EV/HEV applications
Electromagnetically-excited noise mitigation techniques of electric motors used in EV/HEV applications Jean Le Besnerais contact@eomys.com 21 th June 2018 EOMYS ENGINEERING 2013-2018 www.eomys.com 1 What
More informationVIBRATION ESTIMATION, ASSESSMENT AND PROGNOSIS IN ELECTRICAL MACHINES
National Journal on Electronic Sciences & Systems, Vol. 6 No. 2 October 2015. 10 VIBRATION ESTIMATION, ASSESSMENT AND PROGNOSIS IN ELECTRICAL MACHINES 1C.N. Gnanaprakasam, 2 K. Chitra 1 Research scholar
More informationAnalysis on Harmonic Loss of IPMSM for the Variable DC-link Voltage through the FEM-Control Coupled Analysis
J Electr Eng Technol.2017; 12(1): 225-229 http://dx.doi.org/10.5370/jeet.2017.12.1.225 ISSN(Print) 1975-0102 ISSN(Online) 2093-7423 Analysis on Harmonic Loss of IPMSM for the Variable DC-link Voltage through
More informationThree-Phase Induction Motors. By Sintayehu Challa ECEg332:-Electrical Machine I
Three-Phase Induction Motors 1 2 3 Classification of AC Machines 1. According to the type of current Single Phase and Three phase 2. According to Speed Constant Speed, Variable Speed and Adjustable Speed
More informationModelling of Electrical Machines by Using a Circuit- Coupled Finite Element Method
Modelling of Electrical Machines by Using a Circuit- Coupled Finite Element Method Wei Wu CSIRO Telecommunications & Industrial Physics, PO Box 218, Lindfield, NSW 2070, Australia Abstract This paper presents
More informationANSYS / Ansoft. Component Design Motors & Actuators. Leon Voss ANSYS Inc ANSYS, Inc. All rights reserved. 1 ANSYS, Inc.
ANSYS / Ansoft Component Design Motors & Actuators Leon Voss ANSYS Inc. 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary System Simulation: Drive System Example Power Supply Inverter Actuator
More informationGeneralized Theory Of Electrical Machines
Essentials of Rotating Electrical Machines Generalized Theory Of Electrical Machines All electrical machines are variations on a common set of fundamental principles, which apply alike to dc and ac types,
More informationWinding Function Analysis Technique as an Efficient Method for Electromagnetic Inductance Calculation
Winding Function Analysis Technique as an Efficient Method for Electromagnetic Inductance Calculation Abstract Electromagnetic inductance calculation is very important in electrical engineering field.
More informationSPEED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR USING VOLTAGE SOURCE INVERTER
SPEED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR USING VOLTAGE SOURCE INVERTER Kushal Rajak 1, Rajendra Murmu 2 1,2 Department of Electrical Engineering, B I T Sindri, (India) ABSTRACT This paper presents
More informationAnalysis of Indirect Temperature-Rise Tests of Induction Machines Using Time Stepping Finite Element Method
IEEE TRANSACTIONS ON ENERGY CONVERSION, VOL. 16, NO. 1, MARCH 2001 55 Analysis of Indirect Temperature-Rise Tests of Induction Machines Using Time Stepping Finite Element Method S. L. Ho and W. N. Fu Abstract
More informationNoise and Vibration Prediction in Shunt- Reactor using Fluid Structure Interaction Technique
Noise and Vibration Prediction in Shunt- Reactor using Fluid Structure Interaction Technique by PARMATMA DUBEY CROMPTON GREAVES LTD. parmatma.dubey@cgglobal.com and VIJENDRA GUPTA CROMPTON GREAVES LTD.
More informationAcoustic Noise Reduction in Single Phase SRM Drives by Random Switching Technique
Vol:3, o:, 9 Acoustic oise Reduction in Single Phase SRM Drives by Random Switching Technique Minh-Khai guyen, Young-Gook Jung, and Young-Cheol Lim International Science Index, Electronics and Communication
More informationEstimation of Vibrations in Switched Reluctance Motor Drives
American Journal of Applied Sciences 2 (4): 79-795, 2005 ISS 546-9239 Science Publications, 2005 Estimation of Vibrations in Switched Reluctance Motor Drives S. Balamurugan and R. Arumugam Power System
More informationMICROCONTROLLERS Stepper motor control with Sequential Logic Circuits
PH-315 MICROCONTROLLERS Stepper motor control with Sequential Logic Circuits Portland State University Summary Four sequential digital waveforms are used to control a stepper motor. The main objective
More informationVALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING QUESTION BANK IV SEMESTER EI6402 ELECTRICAL MACHINES Regulation 2013 Academic
More informationStudy on Analysis of Torque-Slip Characteristics of Axial Gap Induction Motor
T. Magn. Soc. Jpn. (Special Issues)., 2, 43-47 (28) Stud on Analsis of Torque-Slip Characteristics of Aial Gap Induction Motor R. Sakai, Y. Yoshida *, and K. Tajima Department of Cooperative Major
More informationNew High Voltage 2-Pole Concentrated Winding and Corresponding Rotor Design for Induction Machines
IECON2015-Yokohama November 9-12, 2015 New High Voltage 2-Pole Concentrated Winding and Corresponding Rotor Design for Induction Machines Oleg Moros, Gurakuq Dajaku FEAAM GmbH D-85577 Neubiberg, Germany
More informationThe effect of winding topologies on the performance of flux-switching permanent magnet machine having different number of rotor poles
ARCHIVES OF ELECTRICAL ENGINEERING VOL. 7(), pp. 5 55 () DOI.5/aee..7 The effect of winding topologies on the performance of flux-switching permanent magnet machine having different number of rotor poles
More informationFinal Publishable Summary
Final Publishable Summary Task Manager: Dr. Piotr Klimczyk Project Coordinator: Mr. Stefan Siebert Dr. Brockhaus Messtechnik GmbH & Co. KG Gustav-Adolf-Str. 4 D-58507 Lüdenscheid +49 (0)2351 3644-0 +49
More informationFractional-slot permanent magnet synchronous generator for low voltage applications
Fractional-slot permanent magnet synchronous generator for low voltage applications P. Andrada, B. Blanqué, E. Martínez, M.Torrent, J.A. Sánchez, J.I. Perat Electronically Commutated Drives Group (GAECE),
More information!! #! # %! & ())) +, ,., / 01 2 & ,! / ))8 /9: : ;, 8) 88)9 () 9) 9)
!! #! # %! & ())) +,,., / 01 2 &3 +444 1,! 5 6 0 5655/565 + 7 ))8 /9: : ;, 8) 88)9 () 9) 9) < IEEE TRANSACTIONS ON MAGNETICS, VOL. 36, NO. 5, SEPTEMBER 2000 3533 Influence of Design Parameters on the Starting
More informationThe Fundamental Characteristics of Novel Switched Reluctance Motor with Segment Core Embedded in Aluminum Rotor Block
58 Journal of Electrical Engineering & Technology, Vol. 1, No. 1, pp. 58~62, 2006 The Fundamental Characteristics of Novel Switched Reluctance Motor with Segment Core Embedded in Aluminum Rotor Block Jun
More informationParameter-independent estimation strategy combining HF signal injection and sliding mode methodology for AC self-sensing control machines.
Parameter-independent estimation strategy combining HF signal injection and sliding mode methodology for AC self-sensing control machines. Application to EV/HEV powertrains Renault - Ecole Centrale de
More informationOptimum design and research on novel vehicle hybrid excitation synchronous generator
Optimum design and research on novel vehicle hybrid excitation synchronous generator Zhong-Shu Liu * The Key Laboratory for Automotive Electronics and Electric Drive of Fujian Province /School of Information
More informationRealize Your Product Promise. Maxwell
Realize Your Product Promise Maxwell DC permanent magnet motor solved by Maxwell with ANSYS RMxprt Build reliability and efficiency into your electromagnetic and electromechanical designs with ANSYS Maxwell.
More informationCharacterisation of radial vibration force and vibration behaviour of a PWM-fed fractional-slot induction machine
Characterisation of radial vibration force and vibration behaviour of a PWM-fed fractional-slot induction machine Jean Le Besnerais 1a, Vincent Lanfranchi 2a, Michel Hecquet 1b, Guy Friedrich 2b and Pascal
More informationInductance Based Sensorless Control of Switched Reluctance Motor
I J C T A, 9(16), 2016, pp. 8135-8142 International Science Press Inductance Based Sensorless Control of Switched Reluctance Motor Pradeep Vishnuram*, Siva T.**, Sridhar R.* and Narayanamoorthi R.* ABSTRACT
More informationA COMPARISON STUDY OF THE COMMUTATION METHODS FOR THE THREE-PHASE PERMANENT MAGNET BRUSHLESS DC MOTOR
A COMPARISON STUDY OF THE COMMUTATION METHODS FOR THE THREE-PHASE PERMANENT MAGNET BRUSHLESS DC MOTOR Shiyoung Lee, Ph.D. Pennsylvania State University Berks Campus Room 120 Luerssen Building, Tulpehocken
More informationROTOR FAULTS DETECTION IN SQUIRREL-CAGE INDUCTION MOTORS BY CURRENT SIGNATURE ANALYSIS
ROTOR FAULTS DETECTION IN SQUIRREL-CAGE INDUCTION MOTORS BY CURRENT SIGNATURE ANALYSIS SZABÓ Loránd DOBAI Jenő Barna BIRÓ Károly Ágoston Technical University of Cluj (Romania) 400750 Cluj, P.O. Box 358,
More informationEE 410/510: Electromechanical Systems Chapter 5
EE 410/510: Electromechanical Systems Chapter 5 Chapter 5. Induction Machines Fundamental Analysis ayssand dcontrol o of Induction Motors Two phase induction motors Lagrange Eqns. (optional) Torque speed
More information1. Introduction 1.1 Motivation and Objectives
1. Introduction 1.1 Motivation and Objectives Today, the analysis and design of complex power electronic systems such as motor drives is usually done using a modern simulation software which can provide
More informationFuminori Ishibashi Shibaura Institute of
Space Distribution of Electromagnetic Forces of Induction Motor Fuminori Ishibashi Shibaura Institute of Technology,Minato-ku,Tokyo,108-8548,Japan,ishif@sic.shibaura-it.ac.jp Shinichi Noda Toshiba Corporation,
More informationPerformance Analysis and Comparison of Three IPMSM with High Homopolar Inductance for Electric Vehicle Applications
Performance Analysis and Comparison of Three IPMSM with High Homopolar Inductance for Electric Vehicle Applications Hussein Dogan, Frédéric Wurtz, Albert Foggia, Lauric Garbuio To cite this version: Hussein
More informationAnalysis on exciting winding electromagnetic force of Turbogenerator under rotor interturn short circuit fault
International Conference on Advanced Electronic Science and Technology (AEST 2016) Analysis on exciting winding electromagnetic force of Turbogenerator under rotor interturn short circuit fault a Hao Zhong,
More informationAC Machinery. Revised October 6, Fundamentals of AC Machinery 1
Fundamentals of AC Machinery Revised October 6, 2008 4. Fundamentals of AC Machinery 1 AC Machines: We begin this study by first looking at some commonalities that eist for all machines, then look at specific
More informationA Dynamic Modeling Permanent Magnet Synchronous Motor Drive System
A Dynamic Modeling Permanent Magnet Synchronous Motor Drive System MISS. KINJAL G. PATEL P.G. Student, Department of Electrical Engineering SSSRGI, Vadasma, Mehsana MR. CHIRAG V. PATEL Assistant Professor,
More informationMitigation of Cross-Saturation Effects in Resonance-Based Sensorless Switched Reluctance Drives
Mitigation of Cross-Saturation Effects in Resonance-Based Sensorless Switched Reluctance Drives K.R. Geldhof, A. Van den Bossche and J.A.A. Melkebeek Department of Electrical Energy, Systems and Automation
More informationStep vs. Servo Selecting the Best
Step vs. Servo Selecting the Best Dan Jones Over the many years, there have been many technical papers and articles about which motor is the best. The short and sweet answer is let s talk about the application.
More informationCOMPEL. Study for performance characteristics of surface permanent magnet motor at various magnetization patterns
Study for performance characteristics of surface permanent magnet motor at various magnetization patterns Journal: COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic
More informationModeling & Simulation of PMSM Drives with Fuzzy Logic Controller
Vol. 3, Issue. 4, Jul - Aug. 2013 pp-2492-2497 ISSN: 2249-6645 Modeling & Simulation of PMSM Drives with Fuzzy Logic Controller Praveen Kumar 1, Anurag Singh Tomer 2 1 (ME Scholar, Department of Electrical
More informationCHAPTER 2 STATE SPACE MODEL OF BLDC MOTOR
29 CHAPTER 2 STATE SPACE MODEL OF BLDC MOTOR 2.1 INTRODUCTION Modelling and simulation have been an essential part of control system. The importance of modelling and simulation is increasing with the combination
More informationElectromagnetic Field Analysis and Motor Testing for the Development of Application Technology of Electrical Steel Sheets
Technical Report UDC 669. 14. 018. 583 : 61. 317. 44 Electromagnetic Field Analysis and Motor Testing for the Development of Application Technology of Electrical Steel Sheets Kiyoshi WAJIMA* Yasuo OHSUGI
More information