Features and Benefits
|
|
- Kristina Marsh
- 5 years ago
- Views:
Transcription
1 HAL24 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization. This method reduces the offset voltage normally caused by device over molding, temperature dependencies, and thermal stress. HAL24 is special made for low operation voltage,.6, to active the chip which is includes the following on a single silicon chip: voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, CMOS output driver. Advanced CMOS wafer fabrication processing is used to take advantage of low-voltage requirements, component matching, very low input-offset errors, and small component geometries. This device requires the presence of unipolar magnetic fields for operation. The package type is in a Halogen Free version has been verified by third party Lab. Features and Benefits CMOS Hall IC Technology Strong RF noise protection.6 to 6 for battery-powered applications Operation down to.6, Unipolar Hall Switch Micro power consumption High Sensitivity for reed switch replacement applications Low sensitivity drift in crossing of Temp. range Ultra Low power consumption at ua (Avg) High ESD Protection, HBM > ±4K( min ) Totem-pole output Applications Solid state switch Handheld Wireless Handset Awake Switch ( Flip Cell/PHS Phone/Note Book/Flip ideo Set) Magnet proximity sensor for reed switch replacement in low duty cycle applications Water Meter PDA PDD NB Pad PC
2 Functional Diagram DD Awake/Sleep Timing Control DD Offset Cancellation Amp Control Logic Out Hall Sensor GND Note: Static sensitive device; please observe ESD precautions. Reverse DD protection is not included. For reverse voltage protection, a 00Ω resistor in series with DD is recommended. HAL24, HBM > ±4K which is verified by third party lab. Typical application circuit DD OUT GND C:0nF C2:00pF
3 HAL24 Absolute Maximum Ratings At(Ta=2 ) Characteristics alues Unit Supply voltage,(dd) Output oltage,(out) -0. Unlimited Gauss ma Operating temperature range, (Ta) -40 to +8 Storage temperature range, (Ts) -6 to +0 Maximum Junction Temp,(Tj) 0 22 / 40 /W 49 / 90 /W 0 / 20 mw Reverse oltage, (DD) (OUT) Magnetic flux density Output current,(iout) Thermal Resistance (θja) K / SN (θjc) K / SN Package Power Dissipation, (PD) K / SN Note: Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute maximumrated conditions for extended periods may affect device reliability. Electrical Specifications DC Operating Parameters Ta=2, DD=.8 Parameters Supply oltage,(dd) Supply Current,(IDD) Test Conditions Operating Min.6 Units 6 olts.4 ma Sleep State.6 μa 0 μa ua Output Leakage Output off Output High Current,(I off) oltage,(oh) IOUT=0.mA(Source) Output Low oltage,(ol) IOUT=0.mA(Sink) Awake mode time,(taw) Operating Sleep mode time,(tsl) Operating DD-0.2 Duty Cycle,(D,C) Max Awake State Average Electro-Static Discharge Typ us ms 0. HBM 4 % K
4 HAL24EST Magnetic Specifications DC Operating Parameters:Ta=2, DD=.8 Parameter Symbol Test Conditions Min. Typ. Max. Units Operating Point B OP N pole to branded side, B > BOP, Oout On 0 0 Gauss Release Point B RP N pole to branded side, B < BRP, out Off 0 20 Gauss Hysteresis B HY BOPx - BRPx 0 Gauss HAL24EST Output Behavior versus Magnetic Polar DC Operating Parameters:Ta = -40 to 8, DD =.8 to 6 Parameter Test condition OUT Null or weak magnetic field B=0 or B < BRP High North pole B>Bop(~0) Low ST Package SQ Package Out High State oltage in olts N Output 0 BRPS Magnetic Flux Density in Gauss BOPS Low State DSON S
5 Performance Graph Typical Supply oltage(dd) ersus Flux Density 4 Flux Density(Gauss) 2 Bop-S Brp-S Supply oltage() Typical Temperature(TA) ersus Supply Current(IDD) Current consumption 9 Awake current(ua) sleep current(ma) Average current(ua) Temperature( ) Typical Supply oltage(dd) ersus Output oltage(dson) 20.0 Flux Density(Gauss) Typical Temperature(TA) ersus Flux Density Bop-S Brp-S Temperature( ) Typical Supply oltage(dd) ersus Supply current current(idd) Current consumption Awake current(ua) sleep current(ma) Average current(ua) Supply oltage() Typical Temperature(TA) ersus Output oltage(dson) 20.0 Output Saturation oltage (m) Output Saturation oltage (m) Supply oltage() Temperature( )
6 HAL24 Typical Supply oltage(dd) ersus Leakage Current(IOFF) Power Dissipation versus Temperature(TA) 00 Package power Dissipation(mW Output Leakage Current(uA) ST Package Rθja = /w Supply oltage() Temperature(
7 Sensor Location, package dimension and marking HAL24 Package HAL24 ST Package Date Code X X Week Code week code SA SB SC SD SE SF SG SH SI SJ SK SL SM week code SN SO SP SQ SR SS ST SU S SW SX SY SZ week code TA TB TC TD TE TF TG TH TI TJ TK TL TM week code TN TO TP TQ TR TS TT TU T TW TX TY TZ EX:204 Year_8 Week SH
8 Sensor Location, package dimension and marking HAL24ESQ Package SQ Package Hall Plate Chip Location (Top view) NOTES:. PINOUT (See Top iew at left) Pin Pin 2 Pin DD Output GND 2. Controlling dimension: mm;. Chip rubbing will be 0mil maximum; 4. Chip must be in PKG. center. Hall Sensor Location 2 HAL24 SQ Package Date Code X X Week Code week code SA SB SC SD SE SF SG SH SI SJ SK SL SM week code SN SO SP SQ SR SS ST SU S SW SX SY SZ week code TA TB TC TD TE TF TG TH TI TJ TK TL TM week code TN TO TP TQ TR TS TT TU T TW TX TY TZ EX:204 Year_8 Week SH
MH258 Specification Micropower Hall Effect Switch
MH258 Hall-effect sensor is a temperature stable, stress-resistant, micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationMH254 Micro-power CMOS Unipolar Hall Effect Switch
MH254 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation
More informationMH250 Low Switch Point Drift &High Sensitivity Micropower Hall Effect Switch. Features and Benefits. Applications
MH250 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation
More informationTSH253 High Sensitivity Omni-Polar Hall Effect Switch
Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH253 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature
More informationThis device requires the presence of omni-polar magnetic fields for operation.
MH248B Hall-effect sensor is a temperature stable, stress-resistant, micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationMH 249 CMOS High Sensitivity Omni-polar Hall Switch α version
MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationMH 249 CMOS High Sensitivity Omni-polar Hall Switch
MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationSS1350 Unipolar Hall Switch-Low Sensitivity
Packages 3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA) Features and Benefits 3.5V to 24V Operation -40 C to 150 C Superior temperature operation CMOS technology Low current consumption Chopper-stabilized
More informationSS1636 Unipolar Hall Switch-High sensitivity
Packages 3 pin TSOT23 (suffix ST) 3 pin SIP (suffix UA) Features and Benefits 2.5V to 5.5V Operation -40 C to 150 C Superior temperature operation range CMOS technology Low current consumption Chopper-stabilized
More informationThe package type is in a lead (Pb)-free version was verified by third party organization.
MH 281 is a unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide accurate and stable magnetic switch points. The design, specifications and performance have
More informationSW REVISED DECEMBER 2016
www.senkomicro.com REVISED DECEMBER 2016 Chopper Stabilized, Precision Hall Effect Latches for Consumer and Industrial Applications FEATURES AND BENEFITS Symmetrical Latch switch points Resistant to physical
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD HALL EFFECT MICRO SWITCH IC DESCRIPTION The is a low power, pole independent Hall-effect switch with a latched digital output driver. It can work in 2.5V supply. Either a
More informationMT6303 Series Omni-polar, Low Power, MR Switch Sensor
Feature AMR+CMOS monolithic structure High sensitivity B OP = 18Gauss, B RP = 13Gauss Low power consumption Average supply current
More informationAH1815. Description. Pin Assignments. Features. Applications LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH1815 SC59 SOT553 SIP-3
LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a low-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer
More informationMP72X High Sensitivity Hall Latch
High Sensitivity Hall Latch Revision 0.2 1. Overview Features Wide Operating Voltage Range: -Single supply voltage 3.5-24V Specified Operating Temperature Range: -From 40C up to 125C High Magnetic Sensitivity
More informationTSH282 Sensitivity Unipolar Hall Effect Switch
TO-92S Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH282 is an unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology
More informationMT4106-EN Series Uni-polar, Hall-Effect Magnetic Position Sensors
Features and Benefits BCD Technology Magnetic Switch Type: Uni-polar Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range:-40 ~150 High Magnetic Sensitivity B OP =140Gauss,
More informationMT6325 Series Omni-polar, Low Power, MR Switch Sensor
Feature MR+CMOS monolithic structure High sensitivity B OP = 17Gauss, B RP = 14Gauss Low power consumption Average supply current
More informationCosemitech. Automotive Product Group CH913/CH913L. FEATURES and FUNCTIONAL DIAGRAM APPLICATIONS DESCRIPTION
FEATURES and FUNCTIONAL DIAGRAM Micro-power Omnipolar-Switch Hall Sensor Multiple Sensitivity Options (BOP / BRP): ±33 / ±23 Gauss; Open Drain output ability Chopper stabilized design provides: - Superior
More informationAH3373. Description. Pin Assignments NEW PRODUCT. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH AH3373
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Unipolar switch IC designed for proximity, position and level sensing in industrial
More informationAH1812. Description. Pin Assignments NEW PRODUCT. Applications. Features. Typical Applications Circuit (Note 4) OUTPUT V DD GND 2
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable
More informationSE AAA-000 RE SE AAA-000 RE UA AAA-000 BU UA AAA-000 BU UA AAA-000 CA. SE for TSOT, UA for TO-92(Flat) BU for Bulk, CA for Ammopack
Features and Benefits Wide operating voltage range from 3.5V to 24V Medium sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23 3L and flat
More informationAH1911/AH1921. Description. Pin Assignments NEW PRODUCT. Features. Applications. Typical Applications Circuit (Note 4) 2 OUTPUT GND 3 1 VDD
ULTRA-LOW POWER DIGITAL OMNIPLOAR HALL-EFFECT SWITCH Description Pin Assignments The is an ultra-low power digital Omnipolar Hall Effect switch IC from Diodes broad Hall Effect switches family. Thanks
More informationTable of Contents 1 Functional Diagram General Description Glossary of Terms Absolute Maximum Ratings Pin Definitions and
Features and Benefits Wide operating voltage range from 3.5V to 24V Medium sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23 3L RoHS Compliant
More informationAdvanced Power Electronics Corp. APE2903 MICROPOWER VFM STEP-UP DC/DC CONVERTER TYPICAL APPLICATION ORDERING INFORMATION. Preliminary.
Preliminary MICROPOWER VFM STEP-UP DC/DC CONVERTER FEATURES Very Low Supply Current Regulated Output Voltage Wide Range of Output Voltage is Available from 2.2V to 5.0V by 0.1V Steps Output Voltage Accuracy
More informationUS2882. Bipolar Hall Switch Very High Sensitivity. Features and Benefits. Application Examples. 1 Functional Diagram 2 General Description
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationApplications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features Micro Power Operation for Battery pplications Chopper Stabilized mplifier Independent of North or South Pole Magnet, Easy for Manufacture Small Size Package Lead Free
More informationAH1898. Description. Pin Assignments NEW PRODUCT. Applications. Features PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH U-WLB AH1898
PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a micropower magnetic range selectable (Bop/Brp) Omnipolar Hall effect switch IC with internal pull up and pull down
More informationAH3661 Omnipolar Micropower Hall Effect Sensor
AH3661 Omnipolar Micropower Hall Effect Sensor Outline AH3661 is an Omnipolar micro-power high sensitivity Hall effect sensor which designed for battery-powered handheld digital devices. The sensor chip
More informationCosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM
FEATURES and FUNCTIONAL DIAGRAM AEC-Q100 automotive qualified Digital Omnipolar-Switch Hall Sensor Superior Temperature Stability Multiple Sensitivity Options (BOP / BRP): ±25 / ±15 Gauss; ±70 /±35 Gauss;
More informationData Sheet, V 1.1, Oct TLE4906H TLE4906L. High Precision Hall-Effect Switch. Sensors
Data Sheet, V 1.1, Oct. 2005 TLE4906H High Precision Hall-Effect Switch Sensors Edition 2005-10 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany Infineon Technologies
More informationAH1893. Pin Assignments. Description NEW PRODUCT. Features. Applications. Typical Applications Circuit
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with internal pull up and pull down capability.
More informationJanuary 2009 TLE4906K / TLE4906L. High Precision Hall Effect Switch. Data Sheet V 2.0. Sensors
January 2009 TLE4906K / High Precision Hall Effect Switch Data Sheet V 2.0 Sensors Edition 2009-01 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved.
More informationAH3574. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in consumer
More informationTSH188 Ultra High Sensitivity Hall Effect Latch
Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH188 Hall-effect sensor is a temperature stable, stress-resistant sensor. Superior high-temperature
More informationFeatures. General Description. Applications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features General Description Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small
More information3185 THRU 3189 HALL-EFFECT LATCHES FOR HIGH-TEMPERATURE OPERATION FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C V CC GROUND OUTPUT SUPPLY
3185 THRU 3189 Data Sheet 2769.2A X V CC These Hall-effect latches are extremely temperature-stable and stressresistant sensors especially suited for operation over extended temperature ranges to +15 C.
More informationTLE4976-1K / TLE4976L
February 2009 / High Precision Hall Effect Switch with Current Interface Data Sheet Rev. 2.0 Sense & Control Edition 2009-02-12 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon
More informationAH3363Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3363Q
Description The is an AEC100 qualified high voltage high sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More information2.5~5.5V C AH180. Gnd
Features General Description Micropower operation Operation with magnetic field of either north or south pole (omnipolar) 2.5V to 5.5V battery operation Chopper stabilized Superior temperature stability
More informationAH3368Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTGAE LOW SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3368Q
Description The is an AECQ100 qualified high voltage low sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More informationAH9250. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH9250 TO92S SC59
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity Hall-effect switch with internal pull-up resistor on the output, designed for battery operated
More informationHigh Sensitivity Differential Speed Sensor IC CYGTS9625
High Sensitivity Differential Speed Sensor IC CYGTS9625 The differential Hall Effect Gear Tooth sensor CYGTS9625 provides a high sensitivity and a superior stability over temperature and symmetrical thresholds
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS
MICRONAS HAL1...6, 8, 9, HAL16...19, 23 Hall Effect Sensor Family Edition Feb. 14, 21 621-19-4E 621-48-2DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features 3 1.2. Family Overview
More informationLow-Power Hall Switch
Low-Power Hall Switch FEATURES Micro power consumption 2.4V to 5.5V battery operation Chopper Amplifier based design: Insensitive to noise and offset caused by process variations, operating temperatures
More informationMH491 (T) Specifications
MH491-B,MH491-C,MH491-D, a linear Hall-effect sensor, is composed of Hall sensor, linear amplifier and Totem-Pole output stage. It features low noise output, which makes it unnecessary to use external
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family
Hardware Documentation Data Sheet HAL 1...6, 8, 9, HAL 16...19, 23 Hall Effect Sensor Family Edition Nov. 27, 23 621-48-4DS HALxx DATA SHEET Contents Page Section Title 3 1. Introduction 3 1.1. Features
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features - 3.5V to 20V DC operation voltage - Temperature compensation -
More informationTSH481. Ratio-metric Linear Hall Effect Switch. Description. Features. Ordering Information. Application
TO-92S Pin Definition: 1. V CC 2. GND 3. Output Description TSH481 is a linear Hall-effect sensor which is composed of Hall sensor, linear amplifier and Totem-Pole output stage. It features low noise output,
More informationOrdering Code Product Code Temperature Code Package Code Option Code Packing Form Code AAA-000
Features and Benefits purpose CMOS technology Chopper-stabilized amplifier Low current consumption Operating voltage range from 2.2V to 18V High magnetic sensitivity Multistage Open drain output Thin SOT23
More informationThe differential Hall Effect sensor SC9625 provides a high sensitivity and a superior stability over
Features Integrated filter capacitor South and North pole pre-induction possible Larger air gap 9625 3.8 to 24V supply operating range Wide operating temperature range Output compatible with both TTL and
More informationHALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS
Data Sheet 27621.3A 3161 X This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85 C. The unipolar switching characteristic makes this
More informationTLV4946K, TLV4946-2K. Datasheet. Sense and Control. Value Optimized Hall Effect Latches for Industrial and Consumer Applications. Rev1.
Value Optimized Hall Effect Latches for Industrial and Consumer Applications Datasheet Rev1.1, 2010-08-02 Sense and Control Edition 2010-08-02 Published by Infineon Technologies AG 81726 Munich, Germany
More information3280, 3281, AND 3283 CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES. Suffix ' LT' & ' UA' Pinning (SOT89/TO-243AA & ultra-mini SIP)
28, 281, AND 28 Data Sheet 2769.2b Suffix ' LT' & ' UA' Pinning (SOT89/TO-24AA & ultra-mini SIP) X V CC 1 SUPPLY 2 GROUND PTCT Dwg. PH--2 Pinning is shown viewed from branded side. OUTPUT The A28--, A281--,
More informationMT1321 Series CMOS, Omni-polar, Low Power Hall Sensor
MT1321 eries CMO, Omni-polar, Low Power Hall ensor Features and Benefits CMO Technology Magnetic - Type: Omni - polar Operating Voltage Range: upply Voltage 2.2~5V pecified Operating Temperature Range:
More informationTLE4916-1K. Datasheet. Sense & Control. Low Power Automotive Hall Switch. Rev.1.0,
Low Power Automotive Hall Switch Datasheet Rev.1.0, 2010-02-23 Sense & Control This datasheet has been downloaded from http://www.digchip.com at this page Edition 2010-02-23 Published by Infineon Technologies
More informationUS2882. Application Examples. Features and Benefits. Ordering Code Product Code Temperature Code. 2 General Description. 1 Functional Diagram
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationCYD8945 High Reliability Hall Effect Switch IC
CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications
More informationA3213 and A3214. Micropower Ultra-Sensitive Hall-Effect Switches. Packages:
FEATURES AND BENEFITS Micropower operation Operate with north or south pole 2.4 to 5.5 V battery operation Chopper stabilized Superior temperature stability Extremely low switchpoint drift Insensitive
More informationDiscontinued Product
Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: June 2, 214 Recommended
More informationDual Channel Sensitive Hall Effect Switch CYD8536. With Quadrature Outputs
Dual Channel Sensitive Hall Effect Switch CYD8536 With Quadrature Outputs The CYD8536 a dual-channel, bipolar switch with two Hall Effect sensing elements, each providing a separate digital output for
More informationTLV4946-2L. Datasheet. Sense and Control. Value Optimized Hall Effect Latch for Industrial and Consumer Applications. Rev1.
Value Optimized Hall Effect Latch for Industrial and Consumer Applications Datasheet Rev1.1, 2010-08-02 Sense and Control Edition 2010-08-02 Published by Infineon Technologies AG 81726 Munich, Germany
More informationAH1892 PROGRAMMABLE MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH. Pin Assignments. Description NEW PRODUCT. Features.
Description Pin Assignments The is a micropower magnetic range selectable (Bop/Brp) Omnipolar Hall effect switch IC with internal pull up and pull down capability, designed for consumer equipment ranging
More informationUS2884. Application Examples. Features and Benefits. Ordering Code Package Code Option Code Packing SE AAA-000 RE. 2 General Description
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationHAL621, HAL629 Hall Effect Sensor Family MICRONAS. Edition Feb. 3, DS MICRONAS
MICRONAS HAL61, HAL69 Hall Effect Sensor Family Edition Feb., 651-54-1DS MICRONAS Contents Page Section Title 1. Introduction 1.1. Features 1.. Family Overview 4 1.. Marking Code 4 1.4. Operating Junction
More informationSUPPLY GROUND NO (INTERNAL) CONNECTION Data Sheet a SUNSTAR 传感与控制 61 AND 62 Suffix Code 'LH' Pinning (SOT2W) X NC 1
A61 and A62 2-Wire Chopper Stabilized Hall Effect Switches Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer
More informationHigh-Temperature Chopper-Stabilized Precision Hall-Effect Switch for 5 V Applications
APS112 Hall-Effect Switch for V Applications FEATURES AND BENEFITS Optimized for applications with regulated power rails Operation from 2.8 to. V AEC-Q1 automotive qualified Operation up to 17 C junction
More informationA1225, A1227, and A1229. Hall Effect Latch for High Temperature Operation
A, A27, and A29 Features and Benefits Symmetrical switchpoints Superior temperature stability Operation from unregulated supply Open-drain ma output Reverse Battery protection Activate with small, commercially
More informationPT3636 Hi-sensitivity Unipolar Hall Switch
PT3636 Hi-sensitivity Unipolar Hall Switch Applications Automotive Brake Pedal Position detection Proximity detection Weak magnets application Solid state switches P/N: PT3636-XX-X TO92-3L (UA) Features
More informationAH3562Q. Description. Pin Assignments. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH Description The is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity
More informationHAL , 508, 509, HAL Hall Effect Sensor Family
MICRONAS INTERMETALL HAL1...6, 8, 9, HAL16...18 Hall Effect Sensor Family Edition April Feb. 4, 16, 1996 1999 61-36-1DS 61-48-1DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features
More informationATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND
Features General Description 3.5V to 20V DC Operation Voltage Temperature Compensation Wide Operating Voltage Range Open-Collector Pre-Driver 25mA Maximum Sinking Output Current Reverse Polarity Protection
More informationHardware Documentation. Data Sheet. HAL 5xy. Hall-Effect Sensor Family. Edition April 15, 2010 DSH000020_004E
Hardware Documentation Data Sheet HAL 5xy Hall-Effect Sensor Family Edition April 15, 21 DSH2_4E HAL 5xy DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data contained in
More informationMICROPOWER, GENERAL-SENSITIVE HALL EFFECT SWITCH
Description Pin Assignments The micro power Omni-polar Effect switch IC designed for portable and battery powered equipment such as cellular phones, PDA s and portable PC s. Based on two sensitive Effect
More informationPART OBSOLETE USE AH3774. Applications
PART OBSOLETE USE AH3774 HIGH SENSITIVITY HALL EFFECT LATCH Description Pin Assignments The is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications.
More informationA3282. Features and Benefits. Chopper stabilization Superior temperature stability Extremely low switchpoint drift Insensitive to physical stress
Package LH, 3-pin Surface Mount GND 3 1 3 2 1 2 Package UA, 3-pin SIP The A3282 Hall-effect sensor is a temperature stable, stress-resistant latch. Superior high-temperature performance is made possible
More informationSmart motor driver with embedded Hall sensor
Smart motor driver with embedded Hall sensor Features Motor driver with integrated Hall sensor Lock-shutdown protection & auto-restart function Precise magnetic switching thresholds Soft-switch phase-switching
More informationA1266. Micropower Ultrasensitive 3D Hall-Effect Switch PACKAGES:
FEATURES AN BENEFITS True 3 sensing Omnipolar operation with either north or south pole. to. operation Low supply current High sensitivity, B OP typically G Chopper-stabilized offset cancellation Superior
More informationUS2884. Features and Benefits. Applications. Ordering information. Bipolar Hall Switch Very High Sensitivity
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationA3121, A3122, and A3133
A3121, A3122, and A3133 Hall Effect Switches for High Temperature Operation Discontinued Product These parts are no longer in production The device should not be purchased for new design applications.
More informationSingle Phase Full-Wave Motor Driver with Built-in Hall Sensor for Fan Motor
Single Phase Full-Wave Motor Driver with Built-in Hall Sensor for Fan Motor The AM309 is a single phase full-wave fan motor driver IC with built-in hall sensor. Rotation speed curve could be adjusted by
More informationMT1101 Series CMOS, Uni-polar, Hall-Effect
MT1101 eries CMO, Unipolar, HallEffect Magnetic Position ensors Features and Benefits CMO Technology Magnetic Type: Unipolar Wide Operating oltage Range: upply oltage 2.8~18 pecified Operating Temperature
More informationMLX92212LSE 3-Wire Hall Effect Latch / Switch
Features and Benefits Low voltage supply : from 2.5V to 5.5V Chopper-stabilized amplifier stage Low power switch: 2.1mA Wide temperature range: -40 C to 150 C Automotive qualified: AEC-Q100 Optimized ESD
More informationDISCONTINUED PRODUCT FOR REFERENCE ONLY COMPLEMENTARY OUTPUT POWER HALL LATCH 5275 COMPLEMENTARY OUTPUT POWERHALL LATCH FEATURES
5275 POWER HALL LATCH Data Sheet 27632B X V CC 1 SUPPLY ABSOLUTE MAXIMUM RATINGS at T A = +25 C Supply Voltage, V CC............... 14 V Magnetic Flux Density, B...... Unlimited Type UGN5275K latching
More information3141 THRU 3144 SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION. FEATURES and BENEFITS V CC GROUND OUTPUT SUPPLY
3141 THRU 3144 Data Sheet 27621.6B* FOR HIGH-TEMPERATURE OPERATION X These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously
More informationHall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function Features: Operate from 2.8V to 36V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated
More information1 Functional Diagram behaviour of magnets becoming weaker with rise in temperature. The included voltage regulator operates from 2.7 to 24V, hence cov
Features and Benefits Wide operating voltage range : from 2.7V to 24V Very high magnetic sensitivity : +/-3mT typical Chopper-stabilized amplifier stage Built-in negative temperature coefficient : -1100ppm/degC
More informationA1266. Micropower Ultrasensitive 3D Hall-Effect Switch PACKAGES:
Micropower Ultrasensitive 3 Hall-Effect Switch FEATURES AN BENEFITS True 3 sensing Omnipolar operation with either north or south pole. to. operation Low supply current High sensitivity, B OP typically
More informationDistributed by: www.jameco.com 1-8-81-4242 The content and copyrights of the attached material are the property of its owner. Data Sheet 27621.2d HALL-EF FECT SWITCH Suffix LT & UA Pinning (SOT89/TO-24AA
More informationA3290 and A3291 Chopper Stabilized, Precision Hall Effect Latches for Consumer and Industrial Applications
for Consumer and Industrial Applications Features and enefits Symmetrical switchpoints Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated
More informationMLX92212LSE 3-Wire Hall Effect Latch / Switch
Features and Benefits Low voltage supply : from 2.5V to 5.5V Chopper-stabilized amplifier stage Low power switch: 2.1mA Wide temperature range: -40 C to 150 C Automotive qualified: AEC-Q100 Optimized ESD
More informationMT1401A-T Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
Features and Benefits CMO Technology Magnetic Type: Latch Wide Operating Voltage Range: upply Voltage 2.8~18V pecified Operating Temperature Range: From 40 ~125 High Magnetic ensitivity Bop=20Gauss, Brp=-20Gauss
More information深圳市钧敏科技有限公司
H E E1 Y A C A2 A1 12V Single coil Motor Driver IC with control Applications Single coil DC brushless motor Package: MSOP-1pin 392A XXXX Features Built-in hall sensor Single phase full wave driver Soft
More informationHardware Documentation. Data Sheet HAL 549. Hall-Effect Sensor with Undervoltage Reset. Edition Jan. 30, 2009 DSH000022_003EN
Hardware Documentation Data Sheet HAL 549 Hall-Effect Sensor with Undervoltage Reset Edition Jan. 3, 29 DSH22_3EN DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data contained
More informationUS2881. Features and Benefits. Applications. Ordering information. 1. Functional Diagram. 2. General Description
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationAH8113. AiT Semiconductor Inc. APPLICATION TYPICAL APPLICATION ORDERING INFORMATION
DESCRIPTION The is an integrated hall-effect sensor designed specifically to meet the requirements of low-power devices. e.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages
More informationFor Reference Only DUAL-OUTPUT HALL-EFFECT SWITCH FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C
Data Sheet 27633b Type UGN3235K Hall-effect sensor ICs are bipolar integrated circuits designed for commutation of brushless dc motors, and other rotary encoding applications using multi-pole ring magnets.
More informationA1101, A1102, A1103, A1104, and A1106
Package LH, 3-pin Surface Mount GND 3 1 2 1 2 VCC VOUT Package UA, 3-pin SIP 3 The Allegro A111-A114 and A116 Hall-effect switches are next generation replacements for the popular Allegro 312x and 314x
More informationPRODUCT DESCRIPTION. Technical Advances in Hall-Effect Sensing. Introduction. Past and present Hall-effect sensors
PRODUCT DESCRIPTION Technical Paper STP -1 Technical Advances in Hall-Effect Sensing by Joe Gilbert Introduction For more than two decades Hall-effect technology has provided solutions for reliable solid-state
More informationHardware Documentation. Data Sheet. HAL 1xy. Hall-Effect Switch IC Family. Edition April 8, 2009 DSH000150_001EN
Hardware Documentation Data Sheet HAL 1xy Hall-Effect Switch IC Family Edition April 8, 2009 DSH000150_001EN HAL1xy DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data
More information