LANSDOWN 400MM FLOOR CUPBOARD (LAN400FC.LW/LAN400FC.PG) INSTALLATION AND AFTERCARE INSTRUCTIONS

Transcription

1 LANSDOWN 400MM FLOOR CUPBOARD (LAN400FC.LW/LAN400FC.PG) INSTALLATION AND AFTERCARE INSTRUCTIONS Installation Procedure This unit can be joined to other units with furniture fixing bolts (not provided). It is recommended that units are joined before they are fixed to the wall. Clamp the units together using suitable clamps, ensuring they are flush and level with each other. Drill out the 4 pilot holes in the side of the unit and using the bolts, join units together. Remove clamps and fix the assembly to the wall as required using corner brackets (not supplied). Door Reversing Step 1 Step 2 DOOR CARCASS Door fixing screws Carcass fixing screws L R Depending on the intended location of the unit, you have the option of choosing whether you want a left or right hand opening door. Choose the desired handing and fix hinges to the door and then the carcass. Holes are also provided on both ends of the door for the badge attachment to be fitted once the desired handing is chosen. Drawer Adjustment Step 3 Step 4 Side View Drawer Side Carcas Adjustable Runner Wheel Front View The drawer may require adjustment to ensure alignment. This is achieved with the adjustable runners. They are located at the front on the underside of the drawer. By rotating the wheel indicated in Step 3 vertical adjustment of the drawer can be made. The drawers have a quick release function. The drawer is removed by squeezing the handles on both of the runners and pulling the drawer forward. The quick release handles are located at the front on the underside of the drawer (see Step 4). Fitting Handle The handle can simply be screwed into place using the screws supplied Customer Services Tavistock, Brassmill Lane Trading Estate, Bath, BA1 3JF t e. info@tavistock-bathrooms.co.uk w:

2 LANSDOWN 400MM FLOOR CUPBOARD (LAN400FC.W/LAN400FC.PG) INSTALLATION AND AFTERCARE INSTRUCTIONS Worktop Installation If being used in a run of furniture, a Lansdown worktop can be used over the floor cupboard. For a standalone installation a wooden worktop is supplied. This can be fixed in place using the adhesive strips supplied. Furniture Aftercare Instructions As with all wooden furniture, this product should be treated with care. We Recommend... Wipe away any water splashes or condensation after use. Excessive exposure to water will deteriorate the furniture All bathrooms should be well ventilated with a suitable extractor fan Please DO NOT... Do not scrub or scour Do not use abrasive cleaning agents Clean with a soft damp cloth only Use a wax free polish if one must be used For removal of lime scale deposits use a suitable proprietary cleaner Replacement Components Should you require any replacement components for this product please contact Roper Rhodes using the contact details below. Customer Services Tavistock, Brassmill Lane Trading Estate, Bath, BA1 3JF t e. info@tavistock-bathrooms.co.uk w:

3 Key Features: Traditional Styling 5 Piece Shaker Door Construction - 24mm thick Soft Close Drawer Runners Magnetic Door Catches Hand Painted Finish Choice of Worktops & Compatible Sanitaryware Available In Two Finishes: Linen Pebble Grey Construction: Finish: Compatible Products: Timber Carcass with 5 Piece Shaker Door, Metal Handles. 2 Painted Finishes Available: Linen & Pebble Grey SB900S Basin Recommend Q60 Pan Technical Enquiries: For technical advice and support please call or info@tavistock-bathrooms.co.uk

4 Floor Cupboard LAN400FC.PG LAN400FC.LW Back to Wall Unit LAN600BTW.PG LAN600BTW.LW Mirror LAN600M.PG LAN600M.LW 365mm 400mm 365mm 608mm 23mm 570mm 845mm 845mm 800mm 550 Vanity Unit LAN550B.PG LAN550B.LW 370mm 540mm 747mm 550 Ceramic Basin SB900S Plumbing Void at Back and Bottom of Units 390mm 570mm 113mm

5 Additional Information To release fascia, push bottom of fascia panel (shown in green in diagram) Side View It is held on with roller catches at the top. Mirror Fitting Overview 1 Determine the desired location and orientation of the mirror. Then measure up to where you desire the top of the mirror to be situated and minus distance (a), to find the final fixing heights. At this height use a level to mark two points a distance of (b) apart. (a) 2 Wall fixing brackets Mount for landscape orientation Measure distance between centres (b) Mount for portrait orientation Drill two holes in the marked positions using a 8mm drill bit to a depth of 55mm. Insert the Wall plug supplied and screw in the fixing screw, leaving surfficient head showing