Cutters and rolls. Box of 9 round cutters. Box of 7 oval cutters. Box of 7 cutters "BOAT" Box of 7 cutters "HEART"

Size: px
Start display at page:

Download "Cutters and rolls. Box of 9 round cutters. Box of 7 oval cutters. Box of 7 cutters "BOAT" Box of 7 cutters "HEART""

Transcription

1 Box of cutters made of polyamid reinforced with glass fibre Extra-strong foodgrade quality Solid and resistant. One-piece construction for perfect hygiène Can be sterilized - T max. 160 C 35 mm high - Round edge for for comfortable handling Box of 9 round cutters Plain ø 2 to 10 cm 5 0, Fluted ø 2 to 10 cm 5 0,22 ø20/30/40/50/60/70/80/90/100 cm Box of 7 oval cutters plain cutters L. 1,8 cm to 11 cm 5 0, fluted cutters L. 1,8 cm to 11 cm 5 0,22 L.32/45/58/70/85/95/110 mm Box of 7 cutters "BOAT" plain cutters L. 2 cm to 11 cm 5 0, fluted cutters L. 2 cm to 11 cm 5 0,18 L.20/35/50/65/80/95/110 mm Box of 7 cutters "HEART" plain cutters L. 1,5 cm to 9,5 cm 5 0, fluted cutters L. 1,5 cm to 9,5 cm 5 0,23 15/25/45/55/65/80/95 mm Page 150

2 Box of 8 cutters "FLOWER" plain cutters plain cutters ø 1,8 to 11,5 cm 5 0, fluted cutters ø 2 to 10 cm 5 0,28 ø 18/30/45/60/75/85/100/115 mm square cutters - L.1,8 to 9,5 cm 5 0,27 L.18/25/35/45/55/65/75/85/95 mm hexagonal cutters - ø 1,5 to 9 cm 5 0,25 ø15/25/35/45/50/60/70/80/90 mm cutters "6-tip star" -ø 3 to 12 cm 5 0,27 L.20/35/50/65/80/95/110/125 mm cutters" Clover" - ø 1,5 to 10 cm 5 0,26 ø 15/30/40/50/65/75/90/100 mm cutters "Moon" - L. 7 to 11 cm 5 0,29 L.70/80/85/90/95/100/110 mm Round plain cutter, small Code Désignation Øcm Hcm Th.mm Kg ,2 1 0,04 This small professional quality stainless steel cutting ring is sharpened to allow you to cut not only pastry but also harder preparations. It has a rim to allow easier handling without risk of injury. Page 151

3 Oval fluted cutter with handle Code Désignation Lcm Wcm Hcm Th.mm Kg St. steel oval fluted cutter L. 17 cm 17 12,5 3,5 0,4 0,23 This professional-grade pastry cutting ring is very sturdy and will not distort. The ergonomic handle gives a good grip without risk of injury. Round fluted cutter Code Désignation Øcm Hcm Th.mm Kg Cutter with handle 13 3,5 0,4 0, Cutter with handle 14 3,5 0,4 0, Cutter with handle 15 3,5 0,4 0, Cutter without handle 4 3,5 0,4 0, Cutter without handle 5,5 3,5 0,4 0, Cutter without handle 8 3,5 0,4 0, Cutter without handle 10 3,5 0,4 0, Cutter without handle 12 3,5 0,4 0,13 These professional-grade stainless steel round pastry cutting rings are very sturdy and distorsion-free. The ergonomic handle on the large diameters gives a good grip for safe cutting. Box of 9 round cutters - stainless steel Code Désignation Hcm Th.mm Kg N Plain 3,5 0,6 0,44 ø 3 to 11 cm N Fluted 3,5 0,6 0,46 ø 3 to 11 cm These professional-grade stainless steel star pastry cutting rings are very sturdy and will not distort. They will satisfy every need thanks to the different forms available. It is the tool which will satisfy your creativity thanks to the 2 different aspects suggested. Ovalized fluted cutter Code Désignation Lcm Wcm Hcm Th.mm Kg No handle 8 4 3,5 0,4 0, No handle ,5 0,4 0, No handle ,5 0,4 0,09 These professional-grade stainless steel round pastry cutting rings are very sturdy and will not distort. They allow you to make oval jam tart shells. Set of decorating cutters Figures (0-9) N 3 0,2 These cutters allow for cake, breads... personalizations. They are solid and perfectly hygienic. Page 152

4 Set of decorating cutters - Alphabet (A-Z) Code Désignation Øcm Hcm Kg N 12,8 2 0,19 These cutters allow for cake, breads... personalizations. They are solid and perfectly hygienic. Rolling pins Rolling pin aluminium, on ball bearings Code Désignation Øcm Lcm Kg N "Makrolon" polyamide rolling pin (1) , N Beech rolling pin (2) ,72 Code Désignation Øcm Lcm Wcm Kg N ,5 1,5 The polyamide rolling pin is ideal for making puff pastry; it has the advantage of staying at a constant temperature so pastry won't stick. This professional rolling pin has bearings to allow smooth rotation, giving easy, effortless use. Wheels for pastry in food plastic material Code Désignation Øcm Lcm Kg Cutting wheel for grating pastry N 4,5 5 0, N 4,5 10 0,14 Spiked roller N 6,5 5 0, N 6,5 10 0,14 Set of 10 disposable baker blades The criss-cross slitter lets you make diamond holes in the pastry for decorating pie-tops. Once the pastry has been through the roller, you just need to stretch it to obtain perfect diamond holes. The pastry-spiking roll is handy for pricking holes quickly and uniformly in strips of pastry. Code Désignation Lcm Kg N Yellow baker blades : fixed blades 13 0, N Red baker blades : pivoting blades 13 0, N Blue baker blades : reversible blades 14 0, N Green baker blades : fixed blades 14,5 0,01 Baker's blades let you slit the dough before baking bread. The blade's cutting edge guarantees you a high quality cut. Page 153

5 Scraper Code Désignation Lcm Wcm Hcm Th.mm Kg PU Straight dough scraper, stiff, st. steel ,5 1 0, Round dough scraper, stiff, st. steel ,5 1 0, N Dough straight scraper, supple steel 11 8,8 2,5 0,3 0, N Dough round scraper, supple steel 11 8,8 2,5 0,3 0,08 12 The rigid or flexible pastry cutters are used for cutting pastry, bread dough, or pizza pastry, and also for scraping out and cleaning. Supple plastic scraper Code Désignation Lcm Wcm Th.mm Kg PU N Supple round scraper ,02 5 T max. 60 C This utensil lets you scrape out a bowl to remove any mixture stuck to the walls. Expanding pastry cutter - Stainless steel This expanding roller carries several stub spindles, each with a cutting wheel, and allows you to cut a series of straight strips in one go. The width is adjustable. Code Désignation Lcm Wcm Hcm Kg N 5 plain wheels ø 5,5 cm to cut 4 strips 22,5 5,2 5,5 0,56 From 1 to 11,5 cm large Double 27 7,8 5,5 0,97 5 plain wheels and 5 fluted wheels ø 5,5 cm to cut 4 strips From 1 to 11,5 cm large plain wheels ø 10 cm to cut 5 strips 27 6,4 10 0,98 From 1 to 12,5 cm large Page 154

CHISELS / PUNCHES. Innovation is our mission!

CHISELS / PUNCHES. Innovation is our mission! CHISELS / PUNCHES Innovation is our mission! 1 PAGE FLAT CHISELS 564 TILER S FLAT CHISELS 565 SLITTING CHISEL 565 JOINTING CHISELS 565 BRICKLAYERS CHISEL 566 POINTED CHISELS 566 ELECTRICIANS CHISEL 566-567

More information

Bakery Machinery DAUB SLICING BREAD. EN 72v1

Bakery Machinery DAUB SLICING BREAD. EN 72v1 Bakery Machinery EN 72v1 SLICING BREAD Bakery Machinery D/ Compact Slicer serie... 4 D/ Cross Slicer serie... 6 D/ Performance Slicer serie... 8 D/ Slicer serie... 10 D/ Cross Slicer 208... 12 D/ Slicer

More information

Project from

Project from Project: Rolling pin plans Page 1 of 5 Rolling pin plans Rolling pin is the food preparation utensil of cylindrical shape, used for the dough rolling and shaping. There are two basic shapes of rolling

More information

To prepare for your upcoming exam it s vitally important for you to revise key information and technical terminology for each subject discipline.

To prepare for your upcoming exam it s vitally important for you to revise key information and technical terminology for each subject discipline. To prepare for your upcoming exam it s vitally important for you to revise key information and technical terminology for each subject discipline. In the exam there will be some multiple choice questions

More information

ME 25 ENGLAND. Tel +44 (0) Web 1 Blatchford Road, Horsham, West Sussex RH13 5QR

ME 25 ENGLAND. Tel +44 (0) Web   1 Blatchford Road, Horsham, West Sussex RH13 5QR ENG ME 25 Automatic edge bander me 25 THE INNOVATIVE AUTOMATIC EDGE BANDING MACHINE FOR CRAFT JOINER S SHOPS Stable, steady, with constantly maintained adjustments, thanks to the stainless steel single-block

More information

LIERS P

LIERS P 70 73 80 85 87 91 95 96 P LIERS 97 99 100 101 103 104 105 71 BOST pliers Flanged trivet Master clearance. Shot-blasted finish Transparent anticorrosion varnish. Very high reliability of the unlimited use

More information

Pliers. Erem pliers, stripping pliers, forming pliers. Internal patented Erem Magic Spring. High precision screw joint. Precision ground jaws

Pliers. Erem pliers, stripping pliers, forming pliers. Internal patented Erem Magic Spring. High precision screw joint. Precision ground jaws Pliers Erem pliers, stripping pliers, forming pliers Gripping and bending pliers with standard and ergonomic handles MagicSense moulded handle for increase comfort Wide variety of head shapes Special tool

More information

SHARPEN END OF END MILL. By George Pruitt

SHARPEN END OF END MILL. By George Pruitt SHARPEN END OF END MILL By George Pruitt Revised 3-5-13 The following instructions are for sharpening the end of an end mill with a Monoset tool and cutter grinder. Collet clamping nut Workhead Wheelhead

More information

SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20

SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES RIVETING STAKES 03 20 03 SPECIALIZED WATCH MAKING TOOLS 03 2 LATHES 03 12 RIVETING STAKES 03 20 SPECIALIZED WATCH MAKING TOOLS i Tools for locking/unlocking oscillating weight bolts. S Cal. 2892 and 7750 For calibres Base holder

More information

2014 Collection & Price List

2014 Collection & Price List 2014 Collection & Price List Since 1892, situated North of Provence in France, Berard has been a resource for kitchen tools and accessories using only the finest Mediterranean olive wood. The quality of

More information

BETEX MECHANICAL PULLERS. BETEX MSP 2/3-arm pullers, self-centering. Safe and easy dismounting of bearings, couplings, rings etc.

BETEX MECHANICAL PULLERS. BETEX MSP 2/3-arm pullers, self-centering. Safe and easy dismounting of bearings, couplings, rings etc. BETEX MSP 2/3-arm pullers, self-centering Safe and easy dismounting of bearings, couplings, rings etc. Ergonomic design, easily operated by one person! Practical! Self centering 2 or 3-arm puller with

More information

Fixing types for pull handles

Fixing types for pull handles Fixing types for pull handles One-sided installation Timber, Plastic profiles, 2-3 chamber aluminium profile Double-sided installation Timber, Plastic profiles, 2-3 chamber aluminium profile Please consult

More information

P I Z Z A S U P P L I E S

P I Z Z A S U P P L I E S APC-SERIES APZC-SERIES Extra HEAVYDUTY COUPE-STYLE PIZZA PANS, ALUMINUM Made of heavy & prime grade aluminum 1.0 mm thickness 4 pieces per pack APC-8 8'' 3 APC-9 9'' 3 APC-10 10'' 3 APC-11 11'' 3 APC-12

More information

PLASTIC PIPE WELDING PLASTIC PIPE WELDING

PLASTIC PIPE WELDING PLASTIC PIPE WELDING PLASTIC PIPE WELDING PLASTIC PIPE WELDING Plastic Pipe Welding Electric sleeve welding unit 222 Sleeve welding units 223 Butt welding machines 224 Butt welding units 228 REMS EMSG 160 Electric sleeve welding

More information

Pliers. Pliers PLIERS

Pliers. Pliers PLIERS Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting

More information

Tanga DX200. The light-weight power pack for the clean removal of windows NEW. 1700W, 70mm cutting detph, reduced weight

Tanga DX200. The light-weight power pack for the clean removal of windows NEW. 1700W, 70mm cutting detph, reduced weight Tanga DX200 The light-weight power pack for the clean removal of windows NEW 1700W, 70mm cutting detph, reduced weight No damage to the reveal with the Tanga DX200: - Clean separation of the old window

More information

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

20 16 PRODUCT CATALOGUE

20 16 PRODUCT CATALOGUE 20 16 PRODUCT CATALOGUE INTRODUCTION Kristal Cutting Tools became a respectable firm in the market since it is established and stood as an indispensable helper of craftsmen with the superior tools. Kristal

More information

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm

Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm 575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18

More information

Souffle Fairy House Table Set

Souffle Fairy House Table Set Souffle Fairy House Table Set If you frequent the garden centers, you KNOW the hottest thing now is not even a plant! It s a fairy garden! You can spend a fortune at the garden center or create your own

More information

STANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology

STANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD COMPACT VERSATILE PRECISE SOLID Universal vertical sawing technology UNIVERSAL VERTICAL SAWING TECHNOLOGY The Swiss label symbolises quality, safety,

More information

Bevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES

Bevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES 82 Bevelling made easy BDS offers a range of professional machines for easy and perfect processing of milling edges: For the preparation of welding seams with the fully automatic AutoCUT 500 or the manually

More information

BUTCHER KNIVES & ACCESSORIES

BUTCHER KNIVES & ACCESSORIES BUTCHER KNIVES & ACCESSORIES linoleum knife 205 pp - 7 * $43.00 8 Breaking Knife * 2005-20 * * * $49.00 8 Breaking Knife 2005-22 * * * $52.00 8 Breaking Knife 2005-25 * * * $56.00 8 scalloped edge 2005

More information

Side cutters and tip cutters

Side cutters and tip cutters Side cutters and tip cutters FOR ALMOST EVERY APPLICATION Internal patented Erem Magic Spring The Magic Spring system used in Erem precision tools is unique. It is integral to the cutting head and provides

More information

SLIDING DOORS DIRECT ROLLER

SLIDING DOORS DIRECT ROLLER SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

The Excel 2 Cutter brush is excellent for painting window frames, doors, skirting boards and furniture.

The Excel 2 Cutter brush is excellent for painting window frames, doors, skirting boards and furniture. Brushes Excel 2 Wall Brush The Excel 2 Wall brush is suited to painting doors, screens, tabletops, cabinets, and railings. Excel 2 Sash Cutter Brush The Excel 2 Cutter brush is excellent for painting window

More information

AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS

AUTOMATIC WIRE STRIPPER CABLE CUTTING PLIERS WIRE STRIPPERS & CUTTERS SA822, CCP SPECIFICATIONS SPECIFICATIONS WIRE STRIPPERS & CUTTERS SA822, CCP AUTOMATIC WIRE STRIPPER Strip No. 8 to 22 AWG wire quickly and easily. Features jaws that grip and strip wire with a single squeeze of the handles before returning to

More information

Fig2: The Sliding Glue Block from the back.

Fig2: The Sliding Glue Block from the back. Ornament Stand Introduction It was one of those forehead smacking moments. I was taking the #2 jaws off my Stronghold chuck, to put on my homemade wooden two jaw chuck set-up. For some reason instead of

More information

FULLER CHISELS CUTTING TOOLS

FULLER CHISELS CUTTING TOOLS CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed

More information

for all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd

for all big jobs. Always the right tool More information.  UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More

More information

Golden angels in an elegant design

Golden angels in an elegant design Golden angels in an elegant design The magic of advent these modern-looking, golden-gowned angels are simply perfect for giving your home a festive Christmas feel. Made using the clay-like FIMOair basic

More information

Décor Hire/ Functions/ Events In Store Catalogue 2016 Hazelden House Somerset Business Park, Unit No 5, 6 Delson Drive. 7130

Décor Hire/ Functions/ Events In Store Catalogue 2016 Hazelden House Somerset Business Park, Unit No 5, 6 Delson Drive. 7130 Décor Hire/ Functions/ Events In Store Catalogue 2016 Hazelden House Somerset Business Park, Unit No 5, 6 Delson Drive. 7130 Lana: 0769739797 Zahn: 083 633 6784 E: lana@the-o-company.com F: 086 606 8825

More information

UNI-BAR SWIVEL HAMMER. Uni-Bar. Industrial Uni-Bar. Providing Innovation Not Duplication

UNI-BAR SWIVEL HAMMER. Uni-Bar. Industrial Uni-Bar. Providing Innovation Not Duplication UNI-BAR Uni-Bar 19 MULTIPLE Forged Alloy Head Rotates 180º Adjustable Nut for Head Rotation The UNI-BAR is a high-tech improvement over standard crowbars. The forged alloy steel head can be adjusted 180º,

More information

EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES

EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES 111-1 10.0x 0.012 111-1.5 6.5x 111-2 5.0x 111-2.5 4.0x 111-3 3.5x 111-3.5 3.0x 111-4 2.5x Plastic eyeglass

More information

EPA 69OO ELECTRONIC SERVICE CASE. The service case for maintenance and installation tasks in ESD protected areas

EPA 69OO ELECTRONIC SERVICE CASE. The service case for maintenance and installation tasks in ESD protected areas EPA 69OO ELECTRONIC SERVICE CASE The service case for maintenance and installation tasks in ESD protected areas 2 EPA ELECTRONIC SERVICE CASE The service case made from conductive material for maintenance

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?

ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools? ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and

More information

SEIZE THE CLAY. Shape your success as a sculptor with these six easy projects. TRY IT

SEIZE THE CLAY. Shape your success as a sculptor with these six easy projects. TRY IT TRY IT SEIZE THE CLAY Shape your success as a sculptor with these six easy projects. PROJECTS JODI MENSING HARRIS PHOTOGRAPHS STEVEN MCDONALD WORDS HEIDI PALKOVIC 8 DO IT YOURSELF Spring 2017 A PRESS TO

More information

Z Order-No ½ ½ x

Z Order-No ½ ½ x www.wiha.com Safety note: When working with cutting pliers beware of wire ends flying away. Please wear safety glasses. Combination pliers and high-leverage combination pliers. Needle nose pliers with

More information

Professional Pliers & Cutters SERIES

Professional Pliers & Cutters SERIES PROFESSIONA TOOS SERIES 043 Professional Pliers & Cutters SERIES Professional Pliers & Cutters Series 043 044 PROFESSIONA TOOS SERIES AG010002 (175MM) STRAIGHT NOSE, INTERNA PIERS AG010011 (175MM) BENT

More information

Heavenly deco ideas angels

Heavenly deco ideas angels Heavenly deco ideas angels With FIMOair light and FIMO soft, you can conjure up wonderful Christmas decorations - even at the very last minute. FIMOair light modelling clay can be dried in microwave ovens

More information

Tools for cables preparation

Tools for cables preparation Tools for cables preparation 2009 MEDIUM VOLTAGE CABLES 10,20,30 KV Cable preparation, 4 steps to a perfect joint with M-500 SET: 1. Removing of outer sheath 2. Peeling of semi-screen 3. Removing of insulation

More information

Pull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles

Pull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles Pull Handles Fixing Types One-sided installation Wood, plastic profiles, 2-3 chamber aluminium profiles Installation per pair Wood, plastic profiles, 2-3 chamber aluminium profiles 204 HEWI Hardware Technology

More information

perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9

perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 CASE TOOLS PE 9 BRACELET TOOLS PE 13 VICES PE 14 CASE HOLDERS

More information

Manufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted)

Manufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted) Manufacturing and installation instruction Solidare Verso Pergola awning (bottom mounted) Solidare Verso pergola awning 11-05-2017 * * A T T E N T I O N * * AVZ accepts no liability for any errors in this

More information

ENG ME 25. Automatic edge bander

ENG ME 25. Automatic edge bander ENG ME 25 Automatic edge bander me 25 THE INNOVATIVE AUTOMATIC EDGE BANDING MACHINE FOR CRAFT JOINER S SHOPS Stable, steady, with constantly maintained adjustments, thanks to the stainless steel single-block

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

BENEFITS HAND-OPERATED BAILER BORING EQUIPMENT P SA Hand operated bailer boring set

BENEFITS HAND-OPERATED BAILER BORING EQUIPMENT P SA Hand operated bailer boring set In less-cohesive soils, below the groundwater level, a bailer and synthetic casing tubes can be used. For ergonomic reasons a casing tube platform is used. For drilling into the ground and taking soil

More information

Instruction Manual X97

Instruction Manual X97 Index Page Technical data... 2 Dimensions... 3 General description... 4 Selection of cutter... 5 Instruction for grinding... 5 Dimensions of bevel... 7 Bevelling angle... 8 Adjustment: Straight edge (Land)...

More information

One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized

One-sided rack, hot-dip galvanized Space between bicycles 350 mm length approx.kg Part-No. Two-sided rack, hot-dip galvanized Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted to form a serial system, with boreholes for anchoring or plugging. Bicycle parking rack Frame of angular

More information

Tools for the toughest demands. Overview of router bits. A handy guide

Tools for the toughest demands. Overview of router bits. A handy guide Tools for the toughest demands Overview of router bits A handy guide Festool router bit selection This guide provides information on the extensive selection of Festool router bits. You will find bits for

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

Trebuchet Construction Instructions

Trebuchet Construction Instructions Trebuchet Construction Instructions Follow these instructions step by step to create your trebuchet. Materials: Trebuchet Template (6 pages cardstock) Trebuchet Template (1 page paper) One unsharpened

More information

Hand Hacksaw Blades. Standard products / Production to order (special sizes) / Customized colours and design / Private labels

Hand Hacksaw Blades. Standard products / Production to order (special sizes) / Customized colours and design / Private labels Made in Czech Republic since 1934 Hand Hacksaw Blades Standard products / Production to order (special sizes) / Customized colours and design / Private labels 8% COBALT HSS BIMETAL Hand Hacksaw Blades

More information

Cutting Tools. Rennsteig. Ten 47 Limited

Cutting Tools. Rennsteig. Ten 47 Limited + Ten 47 Owner s Manual 4/8 Indent Crimping Tool MicroCrimp 8.78 Rennsteig Cutting Tools Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44

More information

Wiha Professional. Quality down to the last detail. Diagonal cutters and heavy duty diagonal cutters. Diagonal cutters and stripping pliers.

Wiha Professional. Quality down to the last detail. Diagonal cutters and heavy duty diagonal cutters. Diagonal cutters and stripping pliers. Wiha Professional. Quality down to the last detail. Diagonal cutters and heavy duty diagonal cutters. Diagonal cutters and stripping pliers. Z 12 0 05 Diagonal cutters Professional. Semi-circular, swedish

More information

Cross Hatch Cutters Models 295

Cross Hatch Cutters Models 295 Cross Hatch Cutters Models 295 Cross Hatch Cutter with free turnable axle SCROLLRULER adjustable Cross Cut Ruler Folding Ruler Folding Ruler with handle Models 295/XIV and 295/I with cutting head and folding

More information

WISS HAND TOOLS (INCLUDES H.K. PORTER, LUFKIN AND NICHOLSON)

WISS HAND TOOLS (INCLUDES H.K. PORTER, LUFKIN AND NICHOLSON) (INCLUDES H.K. PORTER, LUFKIN AND NICHOLSON) INDEX HACKSAW BLADE, BOXED BI-METALOY 12" 24 TPI (NICHOLSON)... 14-6 HVAC TOOLS CRIMPER 5-BLADE... 14-4 NOTCHER... 14-4 SEAMER... 14-5 JAB SAW MULTIPURPOSE

More information

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

Precision made in Germany. As per DIN The heart of a system, versatile and expandable. 1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2

Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco

More information

Professional Power Tools & Accessories

Professional Power Tools & Accessories Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

The Canadian Tire Paint Roller A Technical Description

The Canadian Tire Paint Roller A Technical Description A Technical Description Eric Morlang Table of Contents 1. General Description of the Paint Roller... 3 2. Part-By-Part Description of the Paint Roller... 4 2.1 Body... 4 2.1.1 Handle... 4 2.1.2 Wire...

More information

Before each patient, and at the first sign of dullness. When To Sharpen

Before each patient, and at the first sign of dullness. When To Sharpen 3 4 Why Are We Here? Identify & preserve inst shape, sharpness, strength Understand inst landmarks & how to use them Evaluate, try, compare diff methods & technology?????????????? A Dull Story New (big

More information

Outdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages

Outdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages - pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

Magma Black Line TITAN 315, by ANSWERK

Magma Black Line TITAN 315, by ANSWERK LATHES #6 Magma Black Line TITAN 315, by ANSWERK Searching for the best wood-turning lathe? TITAN is the answer. Over 30 years of wood-turning lathe design experience has been incorporated into the new

More information

Decorating Objects. Tips and Techniques Experimenting with Decorating Wax

Decorating Objects. Tips and Techniques Experimenting with Decorating Wax Decorating Objects metal can with simple patterns shaved wood box with imprinted pattern lacquered box with strips of decorating Wax tea jar with Decorating and Modeling Wax Decorating objects from daily

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

Simply shape your ideas necklace made of FIMO and leaf metal

Simply shape your ideas necklace made of FIMO and leaf metal Simply shape your ideas necklace made of FIMO and leaf metal This necklace is real a eye-catcher. It s hard to believe that these beads are hand-made! The smaller ones are extremely impressive thanks to

More information

FITTING INTRODUCTION:

FITTING INTRODUCTION: FITTING INTRODUCTION: Machine tools are capable of producing work at a faster rate, but there are occasions when components are processed at the bench. Sometimes it becomes necessary to replace or repair

More information

Pipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape

Pipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated

More information

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES

DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.

More information

SAWS, PIPE CUTTERS. Design. Blade

SAWS, PIPE CUTTERS. Design. Blade SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting

More information

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3

More information

Cutting and stripping tools

Cutting and stripping tools Cutting and stripping tool 0.02 - mm² (16 mm²) 2 Stripping tool for cables Ø 2.5-40 mm 3 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting up to Ø 20 mm 4 Cutting tools for cables

More information

A H M 531 The Civil Engineering Center

A H M 531 The Civil Engineering Center Title Page Introduction 2 Objectives 2 Theory 2 Fitting 3 Turning 5 Shaping and Grinding 7 Milling 8 Conclusion 11 Reference 11 1 Introduction Machining Machining is a manufacturing process in which a

More information

sweeps Smooth Surface and Floor Sweeps B % Black Horsehair B-25 Black Horsehair and Synthetic Filament Blend

sweeps Smooth Surface and Floor Sweeps B % Black Horsehair B-25 Black Horsehair and Synthetic Filament Blend Smooth Surface and Floor Sweeps sweeps Sweeping fine particulate in homes, stores, institutions and offices. B-24 100% Black Horsehair Exceptional quality horsehair with an oval trim for fine sweeping

More information

Twiny paves your way to success...

Twiny paves your way to success... TWO STEPS FORWARD Twiny paves your way to success... MULTIDROP twiny A confectionery product with two flavours... A quality that only Pastrycooks can provide... Ingredients that are rich, natural, healthy

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

Beam/slab grip with ratchet

Beam/slab grip with ratchet Beam/slab grip with ratchet An indispensable aid for carpenters Beam/slab grip = less force required The beam/slab grip with ratchet is an indispensable aid for carpenters. Whether you want to align a

More information

polymer clay. by Jill Erickson

polymer clay. by Jill Erickson intermediate polymer clay You ought to be in pictures... Transfer your favorite photographs to jewelry using polymer clay. by Jill Erickson This direct image-transfer technique is easy to master and does

More information

Cut-True 16M Manual Paper Cutter

Cut-True 16M Manual Paper Cutter Cut-True 16M Manual Paper Cutter 2/2013 OPERATOR MANUAL FIRST EDITION TABLE OF CONTENTS TOPIC PAGE Specifications 1 Safety Guidelines 1 Assembly 2 Overview 3 Description of Equipment Parts 3-4 Operation

More information

Professional Hammers. Strength and Power

Professional Hammers. Strength and Power Professional Hammers Strength and Power - 249 - Ball Pein Hammer - Wood Handle Claw Hammer - Wood Handle T20600 8oz. 225g T20601 12oz. 340g T20602 T20604 24oz. 680g T20605 32oz. 900g T20610 8oz. 225g T20611

More information

CONSTRUCTION TOOLS. Innovation is our mission!

CONSTRUCTION TOOLS. Innovation is our mission! CONSTRUCTION TOOLS Innovation is our mission! 1 PAGE SCRAPERS & TROWELS 736-738 FLOATS 738-739 2 3 4 5 6 7 JOINTING 739 8 9 SAND SIEVE 739 10 11 CONTAINERS 740 PLUMB LINE 740 SCREW CLAMPS 740-741 12 13

More information

Especially suitable for work in restricted working spaces.

Especially suitable for work in restricted working spaces. Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.

More information

Sculpture & Pottery Stands

Sculpture & Pottery Stands Sculpture & Pottery Stands F E 167 Sculpture and Pottery Sculpting and pottery often require a lot of careful precision and painstaking detail to convey concepts or reinforce an aesthetic view. In the

More information

Unrivalled cutting performance

Unrivalled cutting performance PLIERS Perfect material processing CIMCO pliers perform brilliantly in punishing everyday use. Both material and design are designed for a tough workload. The high-alloy steels used are specially designed

More information

TAPER-LOCK HANDLE SYSTEM

TAPER-LOCK HANDLE SYSTEM TAPER-LOCK HANDLE SYSTEM Patent Pending #61728762 FIRST EVER MADE The SB Tools Taper-Lock Handle System offers the versatility of a modular handle system without compromising strength, ease of use, or

More information

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS

TRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or

More information

4D - high-end sawing centre CONTROL EVOLUTION STANDARD COMPACT. The Universal Class for Vertical Panel Saws

4D - high-end sawing centre CONTROL EVOLUTION STANDARD COMPACT. The Universal Class for Vertical Panel Saws 4D - high-end sawing centre CONTROL EVOLUTION COMPACT The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of

More information

The following Instructions are for making an indexed Chuck to create bowls which have 3,4 or 5 equi distance bowls with a possible 6th within.

The following Instructions are for making an indexed Chuck to create bowls which have 3,4 or 5 equi distance bowls with a possible 6th within. The Off-Centre Chuck. Ornamental Turners Group Australia th Update 8 June 2010 The following Instructions are for making an indexed Chuck to create bowls which have 3,4 or 5 equi distance bowls with a

More information

Making a basic hook tool By Alan Lacer

Making a basic hook tool By Alan Lacer Making a basic hook tool By Alan Lacer The hook tool is essentially a right-angle gouge that enables the woodturner doing inside end-grain hollowing to achieve two goals: work with the grain and use a

More information

Masterpiuma3 Glass &Tile Cutters:

Masterpiuma3 Glass &Tile Cutters: Masterpiuma3 Glass &s: 2414 Converse Street Dallas, Tx 75207 T: 972-386-4900 F: 214-447-9581 Conceptsurfaces.com Lead Time: 1-2 Weeks/ Free Shipping for orders of $1,500 or more. 44P3 17-1/4 Can cut all

More information

precision. On a mission of New Compact Generation Always the right choice the Bosch Compact Generation. The new jigsaws from Bosch.

precision. On a mission of New Compact Generation Always the right choice the Bosch Compact Generation. The new jigsaws from Bosch. Always the right choice the Bosch Compact Generation. On a mission of precision. The new jigsaws from Bosch. Easy Expert Universal New Compact Generation Easy Universal Expert NEW! The Compact Generation

More information

Flexible Diamond Disc

Flexible Diamond Disc Diamond Burs - with 2.37mm HP Shanks The abrasive properties of Diamond bonded to the tool ensure fast, easy action & long durability. Used for engraving, drilling, cutting, cleaning castings, etc. Always

More information