Bored Locks Order Forms

Size: px
Start display at page:

Download "Bored Locks Order Forms"

Transcription

1 ored ocks rder Forms T-Zone/11 ine ever ocks Information...1 T-Zone/11 ine rder Form ine ored ocks Information ine rder Form ine ored ocks Information ine rder Form ine ored ocks Information ine rder Form ine ored nob ock Information ine rder Form ine ored nob ock Information ine rder Form...12

2 Turboship Turboship T-Zone/11 ine Exit ever Devices ocks Strength, Durability and Security True interlocking between the cast/ machined stainless steel lockbody and latchbolt. Provides unequalled strength and durability Independent Testing proves: Exceeds 10 TIMES ANSI/HMA A156.2 Grade 1 standard for cycle testing. ver 8 MIIN cycles! Withstands 3-1/2 TIMES ANSI/HMA A156.2 Grade 1 torque force on a locked lever. ver 3000 in/lbs! Virtually no lever sag even after 8 million cycles 10 Year limited warranty. No service required to maintain warranty Design Rose: - 2-3/4" Dia ever: - Cast E Design Rose: E - 3-1/8" Sq ever: - Cast Specifications Maximum Convenience Two-piece rose assembly goes quickly into place Fits 161 door prep only Fewer parts for easier installation nly 45 of lever rotation required to retract latchbolt 2 ADA lever designs and 4 roses (available on Turboship) to cover a wide variety of door preps 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. Design Rose: - 3-1/2" Dia ever: - Cast 1 Design Rose: - 2-3/4" Dia ever: - Cast rdering egend: 11 ine ored ock For Doors 1-3/4" (44mm) thick door adjustable to 2" (51mm) standard acksets 2-3/4" (70mm) standard earing Assembly Cast and machined stainless steel Front Wrought brass, bronze or stainless steel 2-1/4" x 1-1/8" Self-adjusting Strike 808 ANSI Curved ip Strike (Prefix 28-) Hand Universal, not handed evers Secured with 6 lobe security set screw standard 6 obe tool packed with each lock Roses Heavy wrought brass, bronze or stainless steel atchbolt Stainless steel bolt 7/8" (22mm) dia. x 1/2" (13mm) throw Cylinder rass, 6 pin, A keyway standard eys Two, nickel silver Door Prep ANSI A115.2 (161) Minimum Stile 4-1/4" (108mm) with and roses 4-1/2" (114mm) with E and roses Cylinder Prefixes ine x Functions Finish D eyed Different SC Schlage C eyway 21 Construction eying (ost all) 30 ever to accept Schlage cylinders - no cylinder provided 60 Disposable Construction Core 70 Interchangeable Core Disposable Plug C ess Cylinder 28-11G04 - Storeroom 28-11G05 - ffice 28-11U15 - Passage 28-11G16 - Classroom/Security 28-11G37 - Classroom 28-11G38 - Security Classroom 28-11U65 - athroom/privacy Dull Chrome

3 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED RDER FAX (800) rder Form - Turboship T-Zone/11 ine ever ocks CUSTMER RDER N. DATE CUSTMER 1 Week Turbo uying Program % rders Ship within 5 Working Days UYER SHIP GDS T TITE 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days by ATTN T: RDER ID: SHIP VIA: STD. SARGENT CARRIER (THER) FR EDITING, D NT WRITE RD N. Availability: 11 ine/t-zone ever ock Prefixes ine x Functions Rose ever Finish Hand 1 Week Turbo D, SC, 30, 60, 70, C 28-11G04, 28-11G05, 28-11U15, 28-11G16, 28-11G37, 28-11G38, 28-11U65,, Universal 3 Week Contract D, SC, 30, 60, 70, C 28-11G04, 28-11G05, 28-11U15, 28-11G16, 28-11G37, 28-11G38, 28-11U65,,, E, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. rdering Form: 11 ine/t-zone ever ock Qty Prefixes ine x Functions Rose ever Finish Note: 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard 2 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

4 Turboship Turboship 10 ine ored Exit ever Devices ocks Strength, Durability and Security Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements Abusive ocked ever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements 7 YEAR IMITED WARRANTY no service required to maintain warranty G Rose Design Rose G - Heavy Wrought 3-1/2" Dia Rose Design Rose - Heavy Wrought 3-1/2" Dia Convenience Installs in 1 minute or less Quickly adapts to fit multiple through-bolt positions User friendly packaging User friendly instruction sheets Convenient installation diagram on box P ever Design ever: P Solid Cast 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. Specifications For Doors acksets Cylindrical Housing Front Strike Hand Roses atch Cylinder eys Finishes Door Prep Minimum Stile rdering egend: 10 ine ored ock 3 1-3/4" (44mm) thick door adjusts to 2" (51mm) standard 2-3/4" (70mm) standard Steel, zinc dichromate finish Wrought brass, bronze and stainless steel 2-1/4" (57mm) x 1-1/8" (29mm) Fixed evel Wrought brass, bronze and stainless steel 808 curved lip ANSI strike (prefix 28-) All 10 ine ocks are non-handed (Except Electrical Functions & RX-) Heavy wrought brass and bronze Stainless steel 1/2" (13mm) throw rass, 6 pin, A keyway 1 itted standard Two, nickel silver 03, 10, 10, 26 & 161 Door Prep Modified 4-1/2" (114mm) ever Design ever: Solid Cast ever Design ever: Solid Cast Cylinder Prefixes Prefix ption ine x Functions Finishes D eyed Different SC Schlage C eyway 21 Construction eying (ost all) 30 ever to accept Schlage cylinders - no cylinder provided 60 Disposable Construction Core 70 Interchangeable Core Disposable Plug C ess Cylinder FW - Freewheeling J ever Design ever: J Wrought 28-10G04 - Storeroom 28-10G05 - ffice 28-10U15 - Passage 28-10G Exit or Twin Communicating 28-10G16 - Classroom Security/ Apartment/Exit/ Privacy 28-10G24 - Entrance/ffice 28-10G37 - Classroom 28-10U65 - athroom/privacy 10U94 - Double ever Pulls 03 right rass 04 Dull rass 10 Dull ronze 10 Antique ronze 26 right Chrome Dull Chrome

5 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED RDER FAX (800) rder Form - Turboship 10 ine ored ever ocks CUSTMER RDER N. DATE CUSTMER Turbo - 24-Hour Express Program Invoiced at ook Net rders Ship within 24-Hours UYER SHIP GDS T TITE 1 Week Turbo uying Program % rders Ship within 5 Working Days by ATTN T: 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days RDER ID: SHIP VIA: STD. SARGENT CARRIER (THER) FR EDITING, D NT WRITE RD N. Availability: 10 ine ored ock Prefixes ine x Functions Rose ever Finishes Hand Turbo 24-Hour Express D 28-10G04, 28-10G05, 28-10U15, 28-10G37, 28-10U65, G, Universal 1 Week Turbo & 3 Week Contract D SC, 30, 60, 70, C, FW* 28-10G04, 28-10G05, 28-10U15, 28-10G15-3, 28-10G16, 28-10G24, 28-10G37, 28-10U65, 10U94, G, J,, P 03, 04, 10, 10, 26, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. * Free Wheeling is not available with J ever Note: 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard rdering Form: 10 ine ored ocks with Trim Qty Prefixes ine x Functions Rose ever Finishes * Note: FW prefix available in 04, 05, 24, 37, 65 functions only, NT available with J lever trim. 4 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

6 Turboship Exit 7 ine Devices ored ever ocks Strength and Durability Cycle Test: Exceeds 2-1/2 times ANSI/HMA A156.2 Grade 2 cycle requirements 5 Year limited warranty. No service required Flexibility Fits 161 door preps & is available for 160 door preps, specify 20-. Internal through-bolts supply strength and stability without requiring additional door preparation Convenience Installs in 1 minute or less Non-handed design for ease of installation User friendly packaging User friendly instruction sheets Convenient installation diagram on box 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. Specifications For Doors acksets Cylindrical Housing Front Strike Hand Roses atch Cylinder eys Finishes Door Prep Minimum Stile 5 1-3/4" (44mm) thick door Specify 1- for 1-3/8" (35mm) thick door 2-3/4" (70mm) standard Specify 20- for 2-3/8" (60mm) backset Steel, zinc dichromate finish Wrought brass, bronze and stainless steel 2-1/4" (57mm) x 1-1/8" (29mm) Floating evel 20- Prefix has a 2-1/4" (57mm) x 1" (25mm) front for 2-3/8" (60mm) backset Wrought brass, bronze and stainless steel 808 curved lip ANSI strike (28- Prefix) All ocks are non-handed Heavy wrought brass and bronze rass 1/2" (13mm) throw rass, 6 pin, A keyway 1 itted standard Two, nickel silver 03, 10, 10, 26 & 161 Door Prep 160 Door Prep with 20- Prefixes 4-1/2" (114mm) rdering egend: 7 ine ored ock P ever Design ever: P Solid Cast ever Design ever: Solid Cast ever Design ever: Solid Cast Rose Design Rose - Heavy Wrought 3-1/2" Dia Cylinder Prefixes Prefix ption 28-7 ine x Functions Finishes D eyed Different SC Schlage C eyway 21 Construction eying (ost all) 30 ever to accept Schlage cylinders - no cylinder provided 60 Disposable Construction Core 70 Interchangeable Core Disposable Plug C ess Cylinder 1- for 1-3/8" thick door 20- for 2-3/8" ackset 28-7G04 - Storeroom 28-7G05 - ffice 28-7U15 - Passage 28-7G Exit or Twin Comm. 28-7G37 - Classroom 28-7U65 - athroom/privacy 7U93 - Single ever Pulls 7U94 - Double ever Pulls 03 right rass 10 Dull ronze 10 Antique ronze 26 right Chrome Dull Chrome

7 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED RDER FAX (800) rder Form - Turboship 7 ine ored ever ocks CUSTMER RDER N. DATE CUSTMER Turbo - 24-Hour Express Program Invoiced at ook Net rders Ship within 24-Hours UYER SHIP GDS T TITE 1 Week Turbo uying Program % rders Ship within 5 Working Days by ATTN T: RDER ID: 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days SHIP VIA: STD. SARGENT CARRIER (THER) FR EDITING, D NT WRITE RD N. Availability: 7 ine ored ocks Prefixes 28-7 ine x Functions Rose ever Finishes Hand Turbo 24-Hour Express D 28-7G04, 28-7G05, 28-7U15, 28-7G37, 28-7U65 Universal 1 Week Turbo & 3 Week Contract D, SC, 1, 20, 30, 60, 70, C 28-7G04, 28-7G05, 28-7U15, 28-7G15-3, 28-7G37, 28-7U65, 7U93, 7U94,, P 03, 10, 10, 26, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. rdering Form: 7 ine ored ocks QTY Prefixes 28-7 ine x Functions Rose ever Finishes Note: 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard 6 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

8 Turboship Exit 6500Devices ine ored ever ocks /8" (124mm) 2-3/8" (60mm) +/- 3/8" (10mm) 3-3/8" (86mm) Specifications For Doors ackset Cylindrical Housing Front Strike Hand 1-3/8" (35mm) to 1-3/4" (44mm) only 2-3/4" (70mm) standard 2-3/8" (60mm) optional (20- Prefix) Steel zinc dichromate finish Wrought brass and stainless steel 2-1/4" (57mm) x 1-1/8"(29mm) 808 ANSI Curved ip standard (28- Prefix) Non-handed rdering egend: 6500 ine ored ock Cylinder Prefixes Prefix ption ine x Functions Finishes 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. D eyed Different (A eyway nly) SC Schlage C eyway C ess Cylinder for 2-3/8" ackset (160 prep) 28-65G04 - Storeroom 28-65G05 - ffice 28-65U15 - Passage 28-65G37 - Classroom 28-65U65 - athroom/privacy 65U93 - Single ever Pulls 65U94 - Double ever Pulls 03 right rass 04 Dull rass 10 Antique ronze 26 right Chrome Dull Chrome

9 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED RDER FAX (800) rder Form - Turboship 6500 ine ored ever ocks CUSTMER RDER N. DATE CUSTMER 1 Week Turbo uying Program % rders Ship within 5 Working Days UYER TITE SHIP GDS T 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days by ATTN T: RDER ID: FR EDITING, D NT WRITE RD N. SHIP VIA: STD. SARGENT CARRIER (THER) Availability: 6500 ine ored ocks Prefixes ine x Functions Rose ever Finishes Hand 1 Week Turbo & 3 Week Contract D, SC, 20, C 28-65G04, 28-65G05, 28-65U15, 28-65G37, 28-65U65, 65U93, 65U94 03, 04, 10, 26, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. rdering Form: 6500 ine ored ocks with Trim QTY Prefixes ine x Functions Rose ever Finishes Note: 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard 8 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

10 Turboship Exit 8 ine Devices ored nob ocks Features & enefits The SARGENT 8 ine sets a higher standard for Grade 1 bored-in locks. The unique, 8 ine construction provides unequaled strength and durability for the most demanding applications. This is accomplished by true interlocking between the lockbody and the latch. Specify the SARGENT 8 ine when you need the ultimate in strength and durability in a bored knob lock. Direct linkage with fixed alignment between the hub and the latchbolt is the best construction for quietly and effectively operating the latch. For this reason, SARGENT has developed the interlocking aligning and latch tubes, which form a rugged torque resistant T in the critical twist area. This T-Zone construction, combined with long lasting components, makes 8 ine knob locks outstanding! Front plate stamped 8 on front to indicate 8 ine lock. n back with function code and date Support plates fit 161 door prep Aligning tube machined solid bar stock nob assembly plug in design for maximum security, interchangeability, and ease of assembly Deadlocking latch atch seamless brass tube with stainless steel springs for longer life Cylinder solid brass 6 pin system 8G37 x Shown Specifications 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. For Doors ackset Aligning Tube Front Strike Hand atch atch Tube nob Door Prep 9 1-3/8" (35mm) thick door adjustable to 1-3/4" (44mm) standard 2-3/4" (70mm) standard Machined brass from solid bar stock Heavy wrought brass, bronze or stainless steel 2-1/4" (57mm) x 1-1/8" (29mm) Self-adjusting for flat to 1/8" (3mm) in 2" (51mm) bevel 808 ANSI Curved ip standard (28- prefix) Non-handed Stainless steel bolt 7/8" (22mm) dia. x 1/2" (13mm) throw Hard drawn seamless brass tube Heavy wrought brass, bronze 161 Door Prep rdering egend: 8 ine ored ock D eyed Different 21 Construction eying (ost all) C ess Cylinder Cylinder Prefixes 28-8 ine x Functions Finishes 28-8G04 - Storeroom 28-8G05 - ffice 28-8U15 - Passage 28-8G37 - Classroom 28-8U65 - athroom/privacy 10 Dull ronze 10 Antique ronze Dull Chrome

11 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED rder Form - Turboship 8 ine ored nob ocks RDER FAX (800) CUSTMER RDER N. CUSTMER DATE 1 Week Turbo uying Program % rders Ship within 5 Working Days UYER TITE SHIP GDS T 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days by ATTN T: RDER ID: FR EDITING, D NT WRITE RD N. SHIP VIA: STD. SARGENT CARRIER (THER) Availability: 8 ine ored ocks Prefixes 28-8 ine x Functions Rose ever Finishes Hand 1 Week Turbo & 3 Week Contract D, C 28-8G04, 28-8G05, 28-8U15, 28-8G37, 28-8U65, 10, 10, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. rdering Form: 8 ine ored ock QTY Prefixes 28-8 ine x Functions Rose nob Finishes Note: 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard 10 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

12 Turboship Exit 6 ine Devices ored nob ocks Features & enefits Front plate stamped 6 to indicate lock line Deadlocking atch Mounting support plates zinc dichromate finish for corrosion resistance, adjustable for 1-3/8" (35mm) to 1-3/4" (44mm) thick doors ockbody cylindrical housing zinc dichromate finish for corrosion resistance and date stamped Rose wrought brass/bronze nob wrought brass/bronze atch 1/2" (13mm) Throw solid brass reversible latch with adjustable bevel to adapt to all door handing 6G05 x Shown Cylinder Multiple ey Systems The 6 ine is a highly styled standard duty lock line incorporating a broad spectrum of functions, designs and finishes built to conform to ANSI/HMA Series 4000 Grade 2. It is ideally suited for fine homes, apartments, hotels and commercial buildings. Specifications 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved. For Doors ackset Aligning Tube Front Strike Hand /8" (35mm) thick door adjustable to 1-3/4" (44mm) standard 24- Prefix is 2-3/4" (70mm) ackset Steel, zinc dichromate finish Wrought brass or bronze 2-1/4" (57mm) x 1" (25mm) standard 808 ANSI Curved ip standard (28- prefix) Non-cylinder locks non-handed Cylinder type locks reversible in field rdering egend: 6 ine ored ock Cylinder Prefixes ine x Functions Finishes D eyed Different 21 Construction eying C ess Cylinder G04 - Storeroom G05 - ffice U15 - Passage G37 - Classroom U65 - athroom/privacy 03 right rass 10 Dull ronze 10 Antique ronze Dull Chrome

13 THIS FRM IS THE PURCHASE RDER. D NT SEND A CVER P.. DUPICATED RDERS CANNT E RETURNED RDER FAX (800) rder Form - Turboship 6 ine ored nob ocks CUSTMER RDER N. DATE CUSTMER UYER TITE SHIP GDS T ATTN T: Turbo - 24-Hour Express Program Invoiced at ook Net rders Ship within 24-Hours 1 Week Turbo uying Program % rders Ship within 5 Working Days 3 Week - Contract Express Standard uying Program % R QUTE # rders Ship within 15 Working Days by RDER ID: SHIP VIA: STD. SARGENT CARRIER (THER) FR EDITING, D NT WRITE RD N. Availability: 6 ine ored ock Prefixes ine x Functions Rose nob Finishes Hand Turbo 24-Hour Express D G05 Universal 1 Week Turbo & 3 Week Contract D, C G04, G05, U15, G37, U65 03, 10, 10, Universal Note: A is the standard SARGENT eyway and all cylinders will be 1-bitted unless D is specified. rdering Form: 6 ine ored ock QTY Prefixes ine x Functions Rose ever Finishes Note: 24- means 2-3/4" backset 28- is an 808 ANSI Curved ip Strike 1-1/4" lip standard 12 8/01/08 Copyright 2008, Sargent Manufacturing Company, an ASSA AY Group company. All rights reserved.

No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.

No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes. SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.

More information

MEDIUM DUTY LOCKS - LEVERS. Distributed By. DH Pace National Key Service Center DHPace.

MEDIUM DUTY LOCKS - LEVERS. Distributed By. DH Pace National Key Service Center DHPace. CYLINDRICAL LOCKS MEDIUM DUTY LOCKS - LEVERS Distributed By DH Pace National Key Service Center 855-237-3667 BestSolutions@dhpace.com DHPace.com/BestSolutions TABLE OF CONTENTS TABLE OF CONTENTS Page Features...2

More information

5400LN series cylindrical lever locks. rugged yet refined

5400LN series cylindrical lever locks. rugged yet refined rugged yet refined Designed for industrial, commercial and institutional use, the Yale 5400LN Series heavy-duty cylindrical lockset offers no compromise when it comes to rugged reliability and performance.

More information

M O R T I S E L O C K S

M O R T I S E L O C K S MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building

More information

4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS

4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets are designed and manufactured for use in commercial buildings, including hotels and offices, but are also ideal for residential entrances and

More information

Grade 2 Medium Duty Cylindrical Key-In-Lever Lock Product Catalog. Z Series

Grade 2 Medium Duty Cylindrical Key-In-Lever Lock Product Catalog. Z Series Grade 2 Medium Duty Cylindrical Key-In-Lever Lock Product Catalog Non-Handed Catalog Rim Devices Falcon Lock Philosophy Quality locksets delivered on time is the Falcon Lock creed. Whether you re ordering

More information

WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code

WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish 3 5 15 17A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA

More information

Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009

Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009 Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks

More information

MORTISE LOCKS RESIDENTIAL SERIES

MORTISE LOCKS RESIDENTIAL SERIES MORTISE WITH TRIM MORTISE WITH sectional TRIM AVAILABLE FINISHES C15 SATIN NICKEL C26 POLISHED CHROME C26D SATIN CHROME FEATURES cul listed for use on 3-hour Fire Door (Single or Double Doors) Conforms

More information

Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications

Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications 2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality

More information

NM SERIES. Extra Heavy Duty Mortise Locks Grade 1

NM SERIES. Extra Heavy Duty Mortise Locks Grade 1 NM SERIES Extra Heavy Duty Mortise Locks Grade 1 1 Auxiliary latchbolt Available with Interchangeable Core. Electrified Locks available upon request. 2 N SS TS JS GS 4 4 ¾ 5 ¼ 4 ¾ 2 9 /16 2 2 15 /32 2

More information

MEETS ADA REQUIREMENTS!

MEETS ADA REQUIREMENTS! PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security

More information

Where plans come together.

Where plans come together. Where plans come together. MORTISE LOCK Performance You Can Plan On. Taking a facility from architectural blueprint to completed project can be a complicated process. Decisions have to be made, deadlines

More information

commercial Lakeshore Entrance Set 6974 ANSI/BHMA Grade 1

commercial Lakeshore Entrance Set 6974 ANSI/BHMA Grade 1 commercial Lakeshore Entrance Set 6974 ANSI/BHMA Grade 1 mortise sets The world s most extensive contents 3-5 Introduction 6-7 escutcheon sets 8-11 levers 12 escutcheon trims -or- roses 12 turn knobs/pieces

More information

STANDARD-DUTY CYLINDRICAL LOCKSETS 5300 SERIES CATALOG LOCK CYLINDRICAL

STANDARD-DUTY CYLINDRICAL LOCKSETS 5300 SERIES CATALOG LOCK CYLINDRICAL 5300 SERIES 5300 CYLINDRICAL LOCK CATALOG STANDARD-DUTY CYLINDRICAL LOCKSETS BUILT TO LAST Yale 5300 Series standard-duty cylindrical locksets offer a unique combination of positive security, trim design

More information

PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified

PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified PIN Access Electronic Pushbutton Lock 100 Access Codes 1,000 Audit Events Cylindrical, Mortise, and Exit Trim ANSI/BHMA Grade 1 Certified Features Access Control: No Wires: Locking Device Options: Number

More information

F Series CYLINDRICAL LEVERSET (CLUTCH)

F Series CYLINDRICAL LEVERSET (CLUTCH) COMMERCIL LOCKS F Series CYLINDRICL LEVERSET (CLUTCH) 500FC-CT 500FK-CT 500FC-SD San Diego (SD) Lever Independent Torsion Springs Clutch Function Standard Removable Through olt FC Series: Lock with standard

More information

HEAVY-DUTY GRADE 1 KEY-IN-KNOB LOCKSET 5400 SERIES CATALOG LOCK KEY-IN-KNOB

HEAVY-DUTY GRADE 1 KEY-IN-KNOB LOCKSET 5400 SERIES CATALOG LOCK KEY-IN-KNOB 5400 SERIES KEY-IN-KNOB LOCK 5400 CATALOG HEAVY-DUTY GRADE 1 KEY-IN-KNOB LOCKSET TIME-TESTED QUALITY INTRODUCTION When demanding the highest standard of product performance in even the toughest industrial

More information

L-Series Commercial Locks

L-Series Commercial Locks L-Series Commercial Locks Contents 4 L-Series Commercial Locks 6 Schlage L9000 Series 7 Schlage L400 Series 8 M Collection Decorative Lever Designs and Finishes 10 Standard Lever Designs and Finishes 12

More information

Section B. DEADBOLT ENTRANCE SETS general information. Deadbolt & Mortise Entry Sets. A deadbolt entry set includes:

Section B. DEADBOLT ENTRANCE SETS general information. Deadbolt & Mortise Entry Sets. A deadbolt entry set includes: A deadbolt entry set includes: DEADBOLT ENTRANCE SETS general information two backplates two levers or knobs cylinder(s) inside turnpiece spindle latch, 28 retraction adjustable backset deadbolt T-strike

More information

X Series. Heavy Duty, Grade 1 Cylindrical Knob Locks. Falcon Monarch Dor-O-Matic

X Series. Heavy Duty, Grade 1 Cylindrical Knob Locks. Falcon Monarch Dor-O-Matic X Series Heavy Duty, Grade 1 Cylindrical Knob Locks Falcon Monarch Dor-O-Matic T H E F A L C O N D I F F E R E N C E S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon,

More information

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand

1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are

More information

Headline. Push/Pull Latches

Headline. Push/Pull Latches Headline Push/Pull Latches Quality hardware for superior door control 2 Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Glynn-Johnson uses only state-of-the-art

More information

S O L I D B R O N Z E H A R D W A R E the beauty of fine design, the eternity of solid bronze V E N E T O SOLID BRONZE

S O L I D B R O N Z E H A R D W A R E the beauty of fine design, the eternity of solid bronze V E N E T O SOLID BRONZE the beauty of fine design, the eternity of solid bronze V E N E T O dark bronze Saint-Gaudens Hardware is designed to provide lasting service. Made of the highest quality materials and engineered to meet

More information

S O L I D B R O N Z E H A R D W A R E the beauty of fine design, the eternity of solid bronze M A R S T O N SOLID BRONZE

S O L I D B R O N Z E H A R D W A R E the beauty of fine design, the eternity of solid bronze M A R S T O N SOLID BRONZE the beauty of fine design, the eternity of solid bronze M A R S T O N Saint-Gaudens Hardware is designed to provide lasting service. Made of the highest quality materials and engineered to meet strict

More information

Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors.

Underwriters Laboratories : 9K series Listed by Underwriters Laboratories for use on 3 Hr, A label for single or double swinging doors. 9K Series Locks ADA Americans With Disabilities Act: 9K series The design and operation of the BEST cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 Builders Hardware Manufacturers

More information

LT Series. Decorative tubular locks

LT Series. Decorative tubular locks LT Series Decorative tubular locks Put your confidence in the consistency of Schlage The LT Series gives you the quality you can count on from Schlage. LT Series decorative tubular locks are built from

More information

ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG

ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER

More information

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options

DB1000 SERIES. Heavy-Duty Tubular Grade 1 Deadbolts. Standard Features. Optional Features. Options DB1000 SERIES Heavy-Duty Tubular Grade 1 Deadbolts Standard Features n Performance Complies with ANSI A156.5, Grade 1, 250,000 cycles n Chassis Tubular, steel n Deadbolt 1" x 2-1/4", square corner faceplate,

More information

D800 DB600. Grade 1 Heavy-Duty and Grade 2 Dead Bolts

D800 DB600. Grade 1 Heavy-Duty and Grade 2 Dead Bolts D800 DB600 Grade 1 Heavy-Duty and Grade 2 Dead Bolts DEAD BOLTS GRADE 1 D800 GRADE 2 DB600 D800 Series Grade 1 Deadbolt D871 Turn Occupancy Indicator Shown DB600 Series Grade 2 Deadbolt DB60 Cylinder Turn

More information

3000 Series Exit Devices Premier Product

3000 Series Exit Devices Premier Product 00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.

More information

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications

Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications 3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality

More information

MORTISE LOCKS SPECIFICATIONS RESIDENTIAL SERIES

MORTISE LOCKS SPECIFICATIONS RESIDENTIAL SERIES AVAILABLE FINISHES 15 SATIN NICKEL MORTISE WITH ESCUTCHEON TRIM MORTISE WITH SECTIONAL TRIM 19 MATTE BLACK 26 POLISHED CHROME 26D SATIN CHROME FEATURES UL LISTED FOR USE ON 3-HOUR FIRE DOOR (SINGLE OR

More information

Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications

Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock

More information

Knobs and levers. F-Series, Grade 2. Satin Nickel Latitude Lever

Knobs and levers. F-Series, Grade 2. Satin Nickel Latitude Lever Knobs and levers F-Series, Grade 2 Satin Nickel Latitude Lever When it comes to security and safety, no other name is trusted like Schlage. For nearly 90 years, Schlage has been dedicated to providing

More information

NSP CATALOG. The Security Professional s Choice. Toll Free Phones at all our Warehouse Locations!

NSP CATALOG. The Security Professional s Choice. Toll Free Phones at all our Warehouse Locations! NSP CATALOG The Security Professional s Choice Toll Free Phones at all our Warehouse Locations! Largo: 800-282-2837 Atlanta: 877-217-9396 Charlotte: 888-571-9145 Pompano Beach: 888-780-6071 Contract Holder

More information

P-8200 Triad. 33 Point Security Mortise Lock

P-8200 Triad. 33 Point Security Mortise Lock 33 Point Security Mortise Lock P-8200 Triad Copyright 2004, 2007, 2009, 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the

More information

An ASSA ABLOY Group brand Series. Flatbar Exit Devices

An ASSA ABLOY Group brand Series. Flatbar Exit Devices An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy

More information

4200/4600/4600DA Series

4200/4600/4600DA Series 4200/4600/4600DA Series Gainsborough now offers a broad selection of key in lever lockset designs, from the economical 4200 Series to the heavy duty 4600 Series. The 4600 Series key in lever locksets offer

More information

Headline Push/Pull Latches

Headline Push/Pull Latches Push/Pull Latches Quality hardware for superior door control Glynn-Johnson has been providing the highest quality door control hardware for over 75 years. Glynn-Johnson uses only state-of-the-art technology

More information

Securafix. Keeler Hardware. Securafix. Lockwood Catalogue. telephone

Securafix. Keeler Hardware. Securafix. Lockwood Catalogue. telephone Lockwood Catalogue ASSA ABLOY, the global leader in door opening solutions 2 Contents General information 1 3670 Series 3 1800 Series Square End Mortice Latch Furniture with 4 2800 Series Round End Mortice

More information

Steel Hawk 4300 Electrified Deadlatch (elatch)

Steel Hawk 4300 Electrified Deadlatch (elatch) STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or

More information

Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification

Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions

More information

FEATURES. TownSteel Architectural Hardware MFG

FEATURES. TownSteel Architectural Hardware MFG TownSteel Architectural Hardware MFG TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions

More information

Sliding and Pocket Door Hardware

Sliding and Pocket Door Hardware Sliding and Pocket Door Hardware available in the US through 877-777-0592 www.index d.com Premium quality pocket door locks and trim offered in 2 ½, 2 ¾, 3 ¾, 5 and 6 backsets custom backsets also available

More information

PAGE 27. Performance Performance Hinge. Screws Warranty. Pin Finishes Note Gauge

PAGE 27. Performance Performance Hinge. Screws Warranty. Pin Finishes Note Gauge Performance Performance Hinge Screws Warranty Pin Finishes Note Gauge Complies with ANSI A156.1, 1999 (plain bearing and ball bearing) Complies with ANSI A156.17, 1999, UL listed (spring hinge) 4-1/2"

More information

6200 Series. System Components Series Electric Strikes

6200 Series. System Components Series Electric Strikes 6200 Series Strikes for Mortise or Cylindrical Devices Models 6210, 6211, 6211AL, 6211WF, 6212, 6212WF, 6213, 6214, 6215, 6216, 6221, 6222, 6223, 6224, 6224AL, 6225 & 6226 System Components 6200 Series

More information

Installation Instructions For Profile Series v.g1 Cylindrical Lock

Installation Instructions For Profile Series v.g1 Cylindrical Lock Installation Instructions For Profile Series v.g1 Cylindrical Lock A7755A Copyright 2004, 2008, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or

More information

ED8000 Series. Pushpad Exit Devices Parts Manual

ED8000 Series. Pushpad Exit Devices Parts Manual ED8000 Series Pushpad Exit Devices Parts Manual Table of Contents ED8200A Rim Exit Device...4 ED8200(B) Rim Exit Device...6 ED8400A Surface Vertical Rod Exit Device...8 ED8400 Surface Vertical Rod Exit

More information

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction. Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.

More information

4200 Series. Commercial Exit Device

4200 Series. Commercial Exit Device 4200 Series Commercial Exit Device 4200 SERIES COMMERCIAL EXIT DEVICE SUGGESTED ARCHITECTURAL SPECIFICATIONS RIM All exit devices shall be American Eagle 4200 Series rim or surface vertical rod devices.

More information

ED3000 Series. Exit Device Parts Manual

ED3000 Series. Exit Device Parts Manual ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7

More information

Frank E. Best. beginning with the small format interchangeable core.

Frank E. Best. beginning with the small format interchangeable core. Frank E. Best Walter E.Best Marshall IN. Best A family history of innovative security products, beginning with the small format interchangeable core. I founded Marshall Best Security Corporation in order

More information

STANDARD KEYWAYS T SERIES PREMIUM KEYWAYS RESTRICTED KEYWAYS

STANDARD KEYWAYS T SERIES PREMIUM KEYWAYS RESTRICTED KEYWAYS I started Marshall Best Security Corporation in 2004 in order to continue a long family tradition of providing high quality locking products with unequaled customer service at competitive prices. The innovative

More information

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview. Non handed design provides greater flexibility

6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview. Non handed design provides greater flexibility 6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series is designed to

More information

Fine Builders and Home Hardware

Fine Builders and Home Hardware Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry

More information

ST9600 SERIES II. Heavy Duty Mortice Locks

ST9600 SERIES II. Heavy Duty Mortice Locks ST9600 SERIES II Heavy Duty Mortice Locks TABLE OF CONTENTS ST9600 Series II Features. 3 ST9600 Series II Technical Details. 4 ST9600 Series II Ordering Guide 5 ST9600 Series II Mortice Night Latch. 6

More information

CRCODE-202. Mechanical Lock. Instruction and Programming Manual. Before Installing:

CRCODE-202. Mechanical Lock. Instruction and Programming Manual. Before Installing: CRCODE-202 Mechanical Lock Instruction and Programming Manual Before Installing: 1. Please read the instructions carefully to prevent missing important steps. *Note: Improper installations may result in

More information

Weslock-Molten Bronze Collection Entry Handle Features

Weslock-Molten Bronze Collection Entry Handle Features Weslock-Molten Bronze Collection Entry Handle Features Meets ANSI A 156.2 Grade II lock standards Removable knobs/levers prevents scratching during installation Solid Molten Bronze 1 throw deadbolt with

More information

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch

Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt

More information

Full line catalog. Locks, closers, and exits

Full line catalog. Locks, closers, and exits Full line catalog Locks, closers, and exits Contents Cylindrical locks and deadbolts C1000 Series 4 C2000 Series 6 DB1000 Series 9 DB2000 Series 10 Surface door closers DCH1000 Series 12 DCM1000 Series

More information

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel

Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to

More information

B & M HARDWARE. Timely Hardware. Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware. Classic, Traditional & Vintage Styles

B & M HARDWARE. Timely Hardware. Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware. Classic, Traditional & Vintage Styles Vol. 14 $12.00 B & HARDWARE Timely Hardware Builders Hardware House Restoration Hardware Furniture & Cabinet Hardware Classic, Traditional & Vintage Styles B & Hardware 4125 Avenida de la Plata Oceanside

More information

Security Mortise Locks

Security Mortise Locks Security Mortise Locks h 1 TABLE OF CONTENTS Specifications/Standards of Excellence................................ 2 Door Conditions.................................................... 3 Ordering Instructions

More information

RESIDENTIAL. philihardware.com

RESIDENTIAL. philihardware.com ESIDENTIAL philihardware.com New The IP/IS Series Interconnected Lock is a new addition to our contemporary locks. They are designed to fit with ADA requirements. 1 Security Features 200B Series ANSI Grade

More information

SLIDING DOOR LOCKS MISCELLANEOUS

SLIDING DOOR LOCKS MISCELLANEOUS MISCELLANEOUS SLIDING DOOR We offer the BEST delivered prices on this NEW pocket door hardware of any dealer, big discounts off the MSRP prices listed here. Give us a call toll free at (888) 3062298 or

More information

88 Series. Exit device

88 Series. Exit device 88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of

More information

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET

INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)

More information

For New or Retrofit Construction Retrofits Existing ANSI 4-7/8 Strike Prep No Centerline Relocation

For New or Retrofit Construction Retrofits Existing ANSI 4-7/8 Strike Prep No Centerline Relocation CM RETROFITS EXISTING ANSI 4-7/8 STRIKE PREP NO CENTERLINE RELOCATION UNIFLEX 55 SERIES UNIVERSAL APPLICATION STRIKE 55-A For cylindrical locksets and locksets with ANSI centerline latch entry with up

More information

B-Series. Service manual

B-Series. Service manual B-Series Service manual Contents 4 Introduction 4 Standard Features 4 Changes 5 Locks 6 Lock Assembly Drawing Index 7 Single Cylinder Deadlatch (Night Latch): B250 8 Double Cylinder Deadlatch : B252 9

More information

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.

7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction. Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.

More information

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts

Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts 1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder

More information

2100 series exit devices. rugged reliability

2100 series exit devices. rugged reliability rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality

More information

A. Keyless, electronic access control using a PIN (Personal Identification Number)

A. Keyless, electronic access control using a PIN (Personal Identification Number) Kaba Access Controls E-5000 & E3000 Series Locks CSI Specifications PART 1 GENERAL 1.1 SECTION INCLUDES A. Keyless, electronic access control using a PIN (Personal Identification Number) 1.2 RELATED SECTIONS

More information

SIMPLICITY SERIES. Affordable hardware for multi-residential developments made easy.

SIMPLICITY SERIES. Affordable hardware for multi-residential developments made easy. SIMPLICITY SERIES Affordable hardware for multi-residential developments made easy. i An ASSA ABLOY Group brand Contents Simplicity Series Kit Simplicity Series Leversets Simplicity Series Door Escutcheons

More information

P R O D U C T CATA L O G J U N E 2 0 1 0 800.575.2658 www.weslock.com Molten Bronze Elegance Traditionale Essentials Reliant Interconnect U.L. 60 Minutes Rated 2-3 4-5 6-7 8-9 10 11 12-13 WWW.WESLOCK.COM

More information

Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.

Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION. Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2

More information

1006 Series + = Non-handed Trim adapter (goof plate) 5 year limited warranty

1006 Series + = Non-handed Trim adapter (goof plate) 5 year limited warranty 1006 Series The 1006 Series is the strongest and most versatile strike available. It meets or exceeds every standard developed for electric strikes. With 27 faceplate options, the 1006 can accommodate

More information

SERIES LOCKSETS RESIDENTIAL LOCKSETS WELCOME HOME SERIES FEATURES SPECIFICATIONS FINISHES KNOB DESIGN HOW TO ORDER WE A500 B DI 3 WEISER

SERIES LOCKSETS RESIDENTIAL LOCKSETS WELCOME HOME SERIES FEATURES SPECIFICATIONS FINISHES KNOB DESIGN HOW TO ORDER WE A500 B DI 3 WEISER LOCKSETS RESIDENTIAL LOCKSETS Contemporary & traditional designs to compliment every door & decor. FEATURES New Brilliance lifetime finish on US3 15 year warranty Adjustable backset Made in U.S.A. ES KNOB

More information

Section MULTIPOINT LOCKS

Section MULTIPOINT LOCKS 1 Section MULTIPOINT LOCKS 1 MULTIPOINT LOCKS / G000 Multipoint Index Introduction How to Specify Introduction Multipoint Locks Features & Functions Photo Gallery Range Table High Security The new high

More information

4000 Series MS Deadlock Strikes

4000 Series MS Deadlock Strikes ACCESSORIES 4000 SERIES MS DEADLOCK S A-1 4000 Series MS Deadlock Strikes ALUMINUM 4000 Series MS Deadlock Strikes add aesthetics and finish to strike cutouts in jambs. HOLLOW METAL The majority of Adams

More information

Components. North American Manual

Components. North American Manual Components North American Manual North American Manual About FSB Designer Series Lockset Program Lever, Knob and Trim Designs Sliding Door Hardware Door Pulls and Glass Door Hardware Accessories Window

More information

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.

For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY. SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device

More information

1530(F) Mortise Exit Devices Installation Instructions

1530(F) Mortise Exit Devices Installation Instructions 1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal

More information

930 Series Mortice Exit Device

930 Series Mortice Exit Device 930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel

More information

MISCELLANEOUS SLIDING DOOR LOCKS

MISCELLANEOUS SLIDING DOOR LOCKS MISCELLANEOUS SLIDING DOOR SANTA MONICA LARGE SET* PD005.xxx.ENTR Entry set with 2.5" backset lock* Set PD005.xxx.PRIV Privacy set with 2.5" backset lock Set 585 640 PD005.xxx.PASS Passage/dummy set with

More information

88 Series. Exit device

88 Series. Exit device 88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products

More information

PD8000/PD5000 Series. UNISON HARDWARE, INC. (Edition 2) Version: 2016.v1

PD8000/PD5000 Series. UNISON HARDWARE, INC.   (Edition 2) Version: 2016.v1 (Edition 2) PD8000/PD5000 Series UNISON HARDWARE, INC. www.inoxproducts.com Version: 2016.v1 TABLE OF CONTENTS PD8000/PD5000 Series Mortise Lock Page 4 How to Order: PD8000 Mortise Locks with Flush Pulls

More information

Section 7 Wooden Door Locks

Section 7 Wooden Door Locks Section 7 Wooden Door Locks SASH LOCKS COMMERCIAL VERSION- CxC 57mm Specification Technical Features Bolt Tested: Robust construction for high level durability... - 500 kg side push resistant...and security

More information

2000/2100/2200 Series

2000/2100/2200 Series 2000/2100/2200 Series This comprehensive selection of pivoting bolt deadlocks is designed to suit narrow stile hinged and sliding doors. The 2000 Series encompasses deadlocks with 22mm and 36mm bolt projection,

More information

Decorative Lever Designs

Decorative Lever Designs Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com

More information

WindowAndDoorParts.US

WindowAndDoorParts.US Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum

More information

Monarch XX Series. Crossbar Exit Device

Monarch XX Series. Crossbar Exit Device Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet

More information

Section 7 Wooden Door Locks

Section 7 Wooden Door Locks Section 7 Wooden Door Locks file:///l /CATALOGUES/General J an 2009/c us tom er/purdue/catalog/pic ture Library /Wooden Door/Leggelatc h.jpg SASH LOCKS COMMERCIAL VERSION- CxC 57mm Specification Technical

More information

CATALOG FOLGER ADAM ELECTRIC STRIKES. Building on a tradition. of industrial grade strength. with extra-heavy duty. electric strikes for high

CATALOG FOLGER ADAM ELECTRIC STRIKES. Building on a tradition. of industrial grade strength. with extra-heavy duty. electric strikes for high 2010 CATALOG FOLGER ADAM ELECTRIC STRIKES Building on a tradition of industrial grade strength with extra-heavy duty electric strikes for high security requirements ASSA ABLOY, the global leader in door

More information

DORMA Door Controls. The Lock Range

DORMA Door Controls. The Lock Range DORMA Door Controls The Lock Range DORMA Locks. 2 Mortice locks for timber doors Mortice locks for narrow-stile doors 6 11 12 15 Product range DORMA Locks Welcome to the safe side. DORMA locks offer compelling

More information

MORTISE LOCKS. Specifications. Features

MORTISE LOCKS. Specifications. Features I H G Q O - Forend Plate - atch olt C - Dead olt D - Screw Channel for Cylinder E - ockcase F - ction-arm G - Follower H - Turning Device I - Spring N C F E K M P J - ackset K - Distance - ockcase Width

More information

The strongest, most versatile electric strike available

The strongest, most versatile electric strike available Series electric strike shown with N option We offer several types of faceplate options to accommodate your application. Faceplate options sold separately (see pages 5-10). 1006 series shown with J option

More information

8000 SERIES SERIES HEAVY-DUTY MODELS

8000 SERIES SERIES HEAVY-DUTY MODELS GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary

More information

the beauty of fine design,the eternity of solid bronze

the beauty of fine design,the eternity of solid bronze eternal ancient warm timeless elegant durable unique beautiful strong the beauty of fine design,the eternity of solid bronze S O L I D B R O N Z E H A R D WA R E the beauty of fine design, the eternity

More information