CUSTOMER SERVICES HELP LINE NUMBER: +44 (0) (UK) (USA)

Size: px

Start display at page:

Download "CUSTOMER SERVICES HELP LINE NUMBER: +44 (0) (UK) (USA)"

Stephen Summers
5 years ago
Views:

1 rev00 STOP Read through ALL instructions before commencing installation. If you have any questions about this product or issues with installation contact the customer services help line before returning this product to the store. CUSTOMER SERVICES ELP LINE NUMBER: +44 (0) (UK) (USA) 50kg 110lbs AVF Group Ltd. ortonwood 30, Telford, Shropshire, TF1 7YE, England AVF Incorporated 3187, Cornerstone Drive, Eastvale, CA 91752, USA

2 Assembly Overview 2 Person Installation Recommended Determine TV and Cornermount position Fit Support Arm Assembly Fit Shelves Connect TV Tools Recommended Ø12mm (15/32") Masonry 8mm & 13mm Stud Finder Ø5mm (3/16") Wood

3 Index Measure the TV fixing holes Width and eight Fitting the TV Brackets Determine TV and Cornermount position Determine TV and Cornermount eight Fitting the Support Arm Assembly Fitting the TV Bracket Assembling Shelf Module Connecting Shelf Module Connecting the TV Levelling Shelves Adjusting Shelf eight Fitting the Bracket Cover Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon the specification of your TV. This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury. It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard and void of any services (eg gas, electricity, water etc). AVF accept no responsibility for any damage or loss caused by installing this product in a sub standard wall.

4 Boxed Parts L x4 D G x2 G C E A B2 J B1 Templates F1 I F2 K

5 TV Screws, Reducers and Spacers M5 M6 M6 M6 25mm 16mm M5 M4 M5 U1 x4 U2 x4 U3 x4 U4 x4 16mm O3 x4 P1 x2 P2 x1 P3 x1 M4 25mm 16mm M x1 N x2 O1 x3 O2 x1 M6 M6 U5 x4 Y x1 U8 x4 5mm 6mm Z1 x1 Z2 x1 45mm U7 x4 25mm X2 x4 U6 x4 16mm X1 x4 M6 U9 x4 45mm Q x1 R x1 S x4 T x18 25mm 16mm M6 U10 x4 2.5mm Z3 x1 V1 x4 V2 x4 W1 x12 W2 x4

6 1 Measure the TV fixing holes Width and eight X mm! TV Fixing oles If width X is greater than 600mm or height Y greater than 400mm STOP installation now and contact the customer help line Y mm M4 = U1/U2 M5 = U3/U4 M6 = U5-U7 You are provided with 4 diameters of TV fixing screws, M4, M5, M6 and. Determine the screw diameter that fits and remember for step 2. = U8-U10 2 Fitting the TV Brackets No Spacers Spacers For TVs with flat / unobstructed back W1/W2 For TVs with irregular / obstructed back WARNING TV TV TV TV

7 U1-U10 V1 Screw diameter dependant Top V2 W1 If required W2 B1 B2 M4 U1/U2 x4 V1 x4 M5 M6 U3/U4 x4 If required V2 x4 V2 x4 W2 x4 and / or V2 x4 W2 x4 and / or W1 x4 U5-U7 x4 U8-U10 x4 W2 x4 and / or W1 x4 W2 x4 and / or W1 x4 W1 x4 Attach the bracket to the back of your TV using suitable screw, reducer and spacer combinations.

8 3 Determine TV and Cornermount Position Use templates, i and to help you position your TV and Cornermount accurately. Put your TV onto template and draw around it, then cut it to shape Ensure back of TV is level with line TV Ensure your TV is central ii Put template on top of Max Open Red Green represents full range of extension Max Closed iii Position roughly where you want to place your TV and Cornermount. Placing it on top of the giftbox will help you mark your wall more accurately.

9 iv Position and on top of Ensure hole is inside slot v Extend and until they make contact with the wall. Please note: You can only attach your Cornermount to Solid Wall or Wood Stud Wall. If you are attaching to Wood Stud Wall the location of the wood studs will determine where you can position and. If you have and at max extension it is possible you will see some of the Support Arm Assembly when you view your TV, however, you will have more movement. If you have and at min extension it is possible you will not see any of the Support Arm Assembly when you view your TV, however, you will have less movement. Please consider this when positioning and. The diagram below shows how the ends of and must make contact with the wall.

10 You can turn 180 and flip over so that your TV can move further in another direction. The example shows how you can get extra movement to the left by swapping and. has only a small amount of adjustment to the left vi Turn and slide template can now move further to the left to see that there are no clashes. Always ensure hole is inside slot, see step iv. Turn Slide Clash has clashed with and. This angle of TV is not possible vii Once you have decided on the position of your TV and Cornermount tape, and together. Mark the wall where and touch the wall using the lines as a guide.

11 4 Determine TV and Cornermount eight Decide how high you want the bottom of your i ii TV to be from the floor (dimension a ). Measure from the bottom of bracket B2 to the bottom of your TV (dimension b ) At this point you will need to take into consideration if you are using 1 or 2 shelves as this will affect how high the bottom of your TV can be from the floor. Top b B2 a iii Complete the sum to a get dimension c b + c = Minimum dimension c = 1000mm 1 shelf Minimum dimension c = 1150mm 2 shelves e is a small vertical line d is your first drill point c c Use the marks you made in step 3 as a guide to mark d and e

12 5 Fitting the Support Arm Assembly Fitting the support arm assembly takes 8 steps. Follow the 8 steps to ensure your support arm assembly is square and level. i Position the top hole of bracket over drill point d you made in step 4, and mark the bottom drill point Solid Wall Wood Stud d d 100mm (4") Min 50 x 100mm (2 x 4") Min 12.5mm (½") Max Concrete Y Y! Take care! Take care Ø12mm (15/32") Ø5mm (3/16") 75mm (3") 75mm (3") Remove dust from hole Ensure bracket is in the centre of the wood stud!

13 Solid Wall Wood Stud X1 x2 X2 x2 X2 x2 X1 x2 X2 x2 X2 x2 Lubricate screw thread with soap! DO NOT over tighten screws. Tighten screws by hand only ii e G S x2 O3 x2 O3 x2 S x2

14 iii Ensure part G is level and align the top hole of bracket with the vertical pencil line e you made in step 4 Mark this as drill point f e f Y G Y x1 iv S x2 O3 x2 G

15 v Position the top hole of bracket over drill point ff you made in step iii, and mark the bottom drill point Solid Wall Wood Stud f f 50 x 100mm (2 x 4") Min 12.5mm (½") Max 100mm (4") Min Concrete Y Y! Take care! Take care Ø12mm (15/32") Ø5mm (3/16") 75mm (3") Remove dust from hole 75mm (3")! Ensure bracket is in the centre of the wood stud

16 Solid Wall Wood Stud X1 x2 X2 x2 X2 x2 X1 x2 X2 x2 X2 x2 Lubricate screw thread with soap vi! DO NOT over tighten screws. Tighten screws by hand only G C G Remember to assemble parts G and C in the correct orientation. G C G

17 S vii S O3 O3 O3 O3 S S O3 x4 viii L L L L S x4

18 6 Fitting the TV Bracket i P1 P1 O1 O1 A O1 N N 16mm Q M6 M6 M6 N x2 O1 x3 P1 x2 M6 Q x1 ii Y A Check bracket A A is level before fully tightening

19 7 Assembling Shelf Module You can build your shelf module as either 1 shelf or 2 shelves. Please follow the suitable assembly. 1 Shelf Assembly M i E M ii E J Use giftbox as a platform to help assemble shelf module iii K P2 F2 T x12 M5 M x1 P2 x1 T x12

20 2 Shelf Assembly i M E M ii J E Use giftbox as a platform to help assemble shelf module I iii F1 K P2 F2 T x18 M5 M x1 P2 x1 T x18

21 8 Connecting Shelf Module 9 Connecting the TV i ii iii P3 O2 iv Cable Management i ii! Ensure cables don t restrict arm movement! Check all fittings are tight R

22 10 Levelling Shelves Y Y

23 11 Adjusting Shelf eight i Maximum height adjustment 125mm ii iii iv

24 12 Fitting the Bracket Cover Optional Lock Tilt x4 D Turn Slide To remove D i ii

CUSTOMER SERVICES HELP LINE NUMBER: +44 (0) (UK) (USA)

CUSTOMER SERVICES HELP LINE NUMBER: +44 (0) (UK) (USA) 465157 rev00 STOP ## Read through ALL instructions before commencing installation. If you have any questions about this product or issues with installation contact the customer services help line before