OWNER S MANUAL - ShopStrop

Size: px
Start display at page:

Download "OWNER S MANUAL - ShopStrop"

Transcription

1 OWNER S MANUAL - ShopStrop Precision Sharpening System Part Number SS-S (28289) CAUTION: Before using your ShopStrop Precision Sharpening System, read this manual and follow all its Safety and Operating Insutrctions. Safety Operation Maintenance Parts SAFETY Safety is a combination of common sense, staying alert and knowing how to use your ShopStrop Precision Sharpening Kit while sharpening chisel and plane blades. 1. READ and become familiar with this entire instruction manual. LEARN the tool s applications, limitations, and possible hazards. 2. DON T WORK IN A DANGEROUS ENVI- RONMENT. Don t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. 3. CHECK FOR DAMAGED PARTS. Before further use of a tool that is damaged, carefully check to determine that it will operate properly and perform its intended function. Check for alignment, breakage, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced. 4. MAINTAIN TOOLS WITH CARE. Keep tools clean for best and safest performance. Follow all instructions. 5. USE SAFETY GLASSES WHEN US- ING THE ShopStrop Precision Sharpening Kit. SYSTEM OVERVIEW A well-honed tool can be a pure joy to use and a whole lot safer than a dull one. Now you can sharpen chisels, plane irons, marking knives, lathe turning tools, anything that needs a sharp edge... quickly, easily, and inexpensively. No need to buy a bench grinder (or find a place to store it)... and now you can gain unequalled precision with the aid of a ShopStrop Precision Sharpening System and it s new Tool Holder! Simply add ShopStrop Wheel to your drill press! The ShopStrop Wheel and its attachments easily touches up already-sharpened tools as well as those needing complete restoration or shaping. Because the edge is held at eye level, sharpening can be easily observed and controlled. That eliminates the need to guess about the sharpening angle. Both hands are free to guide the edge while the wheel does the work. ShopStrop provides four times the surface area of a vertical grinding wheel, more area to accommodate larger blades. The Basic system consists of a 4 leathercovered wheel with a hex shank, one aluminum disk, and three different grits of adhesive-backed sanding cloth, plus the formulated compound. RTD AA

2 - USING THE BASIC SYSTEM - HONING A BLADE WITHOUT THE PLATFORM 1. Select the appropriate sanding disk and remove the backing from it. Stick the disk to the aluminum disk. TIP - Use the hex spindle as a guide for perfect sanding cloth placement on the aluminum disk. 2. Chuck the ShopStrop Wheel with the aluminum disk and sanding cloth into the drill press. 3. Adjust the drill press to rotate at its slowest speed. A speed of 800 RPM or slower will be more than adequate to put a keen edge on your blade. This speed also allows more control over the sharpening process and reduces the chance of overheating. 4. Work the back side of any instrument having only one sharpening surface, chisel, plain blade, etc., to a true and flat state. Hold the instrument flat on the sanding wheel using 320 grit cloth than moving to 600 grit cloth. 5. Remove the sanding cloth disk and finish the back side by stropping with the honing compound and leather wheel. This is the key to achieving superior results. 6. Now sharpen the bevel side with the drill press running, place the heel of the blade on the rotating wheel and rock it forward until the tool is running flat and even. This perfect angle is easily determined - you ll feel it. 7. After each series of sharpening cycles using progressively finer grits, inspect the tool to check the results. Continue these cycles until you have created a wire burr on the back side of the tool. You will feel it with your fingers. This is the maximum sharpening possible using the sanding disks. 8. Strip the rotating wheel down to the leather strop by removing the aluminum disk and sanding disk. Chuck it into the drill press, again operating at the slowest speed. With the drill press running, apply a small amount of honing compound by lightly touching the stick to the leather. Continue the process by honing or stropping the blade using the same procedure as when using the sanding disk. If the tool had been sanded to the 600 grit level your mirror sharp edge will be achieved in 30 to 60 seconds. Always work on the left side of the hex spindle. DO NOT UNDER ANY! WARNING CIRCUMSTANCES ATTEMPT TO SHARPEN AGAINST THE ROTATION OF THE ROTATING LEATHER WHEEL. SETTING UP THE ROTATING WHEEL AND PLATFORM 1. Follow steps 1 through 3 of the basic system setup. 2. Place the platform loosely on the drill press table with two 3 to 4 C clamps. NOTE: If your drill press is of the smaller variety, simply remove some material on the back edge of the platform. By cutting out this U configuration, the platform now will nest around the drill press column. U Shaped Cutout 3. Lower the rotating wheel into the receiver hole on the platform insuring that the wheel is centered in the hole. Insure the drill press table is level and the wheel is even with the surface of the platform. 4. Secure the platform with the C clamps. 5. Turn the drill press on to insure the rotating wheel has proper clearance. Adjust the platform if necessary. The illustration above shows the sharpening action on the side closest to you. This assumes a clockwise rotation of the rotating wheel. DO NOT UNDER ANY CIR- CUMSTANCES ATTEMPT TO SHARPEN AGAINST THE ROTATION OF THE ROTAT- ING LEATHER WHEEL.

3 SETTING UP A BLADE IN THE HOLDER ASSEMBLY 1. Assemble the pivot block to the tool holder using the 1/4-20 socket head screw and wave washer. This is called the holder assembly. 2. Place two of the 1/4-20 flat head screws in the holes of the tool holder to the outside of the scribe line. 3. Align the blade to be sharpened with the scribe line and place the third 1/4-20 flat head screw in the hole closest to the blade. Flat Head Screws (3) Scribe Line Socket Head Screw socket headed screw. Extend the length of the blade to the platform at that selected angle. Lift this assembly off without changing the length of the blade and retighten the outer screw. 5. Turn on the drill press and using its lowering handle, lower the rotating wheel slightly below the platform surface. Rotate the holder assembly with the blade onto the surface of the sanding cloth and gently release the lever so the rotating wheel comes in contact with blade. 6. After each series of sharpening cycles using progressively finer grits, inspect the tool to check the results. Continue these cycles until you have created a wire burr on the back side of the tool. You will feel it with your fingers. This is the maximum sharpening possible using the sanding disks. 7. Strip the rotating wheel down to the leather strop by removing the aluminum disk and sanding disk. Chuck it into the drill press, again operating at the slowest speed. With the drill press running, apply a small amount of honing compound by lightly touching the stick to the leather. Continue the process by honing or stropping the blade using the same procedure as when using the sanding disk. When the tool had been sanded to the 600 grit level your mirror sharp edge will be achieve in 30 to 60 seconds. 4. Tighten all three screws using the scribe lines to insure a straight alignment of the blade in the tool holder. Method 1: Sharpening at the existing angle. Loosen (adjust) the outside flat head screw on he tool holder, mount this assembly to the pivot pin on the platform, extend the length of the blade to the platform at that peculiar angle, now secure it to the tool block by tightening the socket headed screw. Lift this assembly off, without changing the length of the blade and retighten the outer screw. Method 2: Dialing in an angle between 15º and 35º. Loosen (adjust) the outside flat headed screw on tool holder, mount this assembly to the pivot pin on the platform, select the desired angle on the degree scale, secure it to the tool block by tightening the TOP VIEW BOTTOM VIEW

4 NOTE: Since the tool holder has a complete grip on the blade you are sharpening and your hand is far removed from the sharpening point you may go against the grain of rotation by sharpening on the right side of the hex shaft. This applies only to the sanding disk process.! WARNING NEVER ATTEMPT TO STROP OR HONE THE BLADE AGAINST THE ROTATION OF THE LEATHER SUR- FACE. GOING AGAINST THE SPINNING ACTION ON THE RIGHT SIDE OF THE HEX SHAFT COULD RESULT IN BODILY INJURY. RESTORING THE LEATHER STROP AND SANDING DISKS In time, metal particles will build up in the leather. However, the leather strop can be quickly restored by lightly touching it with a fine wire brush to remove the particles. To remove particle buildup and restore the sanding cloth, use a belt sanding eraser. PLANE BLADE INSTALLATION IN TOOL HOLDER OTHER CONSIDERATIONS AND ADJUSTMENTS Depending on the condition of the edge to be sharpened select the grit of sanding cloth that would work best. Course 150 grit is for complete restoration and reshaping. Medium 320 grit is for generally dull, some minor nicks. Fine 600 grit is for the maintenance level, touch up and preparation prior to the final leather buffing. If the sharpened blade edge becomes skewed it is easily restored to true straight edge. If the raised side of the blade is on the left, merely tilt the left side drill press table down. If the raised side is on the right, tilt the right side of the table down. Only tilt the table a very small amount. This could be up to one or two degrees depending on your drill press runout. THESE ILLUSTRATIONS ARE EXAGGERATED FOR CLARITY. BLADE EDGE RAISED ON THE LEFT, DRILL TABLE IS TILTED DOWN ON THE LEFT. PLANE BLADE INSTALLED IN TOOL HOLDER EXTRA WIDE PLANE BLADE INSTALLED IN TOOL HOLDER USING THE BLADE S SLOT FOR MOUNTING BLADE EDGE RAISED ON THE RIGHT, DRILL TABLE IS TILTED DOWN ON THE RIGHT.

5 MAJOR PARTS OF THE SHOPSTROP PRECISION KIT

6 SS-1 Basic Sharpening System 1 hex arbor leather wheel 1 formulated compound stick 1 aluminum disk 2 cloth sanding disks 150 grit 2 cloth sanding disks 320 grit 2 cloth sanding disks 600 grit SS-2 Sanding Accessories 3 aluminum disks 2 cloth sanding disks 120 grit 2 cloth sanding disks 220 grit 2 cloth sanding disks 400 grit SS-6 Sanding Disk Accessories 2 cloth 4 sanding disks 150 grit 2 cloth 4 sanding disks 320 grit 2 cloth 4 sanding disks 600 grit SS-7 ShopStrop Platform & Tool Holder (for those woodworkers that have already purchased the SS-1 basic, this will complete your system making it an SS-S) 1 tool holder with pivot block 1 drill press platform 1 allen wrench 5/32 1 allen wrench 3/16 1 video 1 hardware set 5492 Table Rock Rd. Central Point, OR Fax: follows: replace, at its option, at no charge, the defective unit. After this ninety (90) day period, you must pay for the replacement unit. This warranty does not cover costs incurred in connection with the removal or installation of accessories, nor does it cover any other contingent expenses.. 2. To obtain warranty service you must deliver the Product freight prepaid, in either its original This warranty does not cover customer instruction, installation or set up adjustment problems. This warranty does not cover cometic damage or damage due to acts of God, accident, misuse, abuse, Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the warranty period must be presented to obtain warranty service. This warranty is invalid if any factory applied serial number has been altered or removed from the Product. -

Gently slide the roundnose chisel on the tool rest and into the grinding wheel. Like you practiced, pivot the chisel to grind the bevel.

Gently slide the roundnose chisel on the tool rest and into the grinding wheel. Like you practiced, pivot the chisel to grind the bevel. Set the roundnose chisel, bevel down on the tool rest. Slide the chisel forward until the center of the chisel touches the grinding wheel (Figure 24-21). With the machine "OFF" prac-tice pivoting the roundnose

More information

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA

SawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA Contractor Fence Assembly OWNER S MANUAL Model CNS-SFA Warranty warrants to the original retail purchaser of the Contractor Fence Assembly accompanying this manual that the fence assembly will be free

More information

Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW

Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW Assembly Instructions and Parts Manual 5C Collet Closer for GHW Lathes Model CC-GHW JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321519 Ph.: 800-274-6848 Revision G1 03/2014 www.jettools.com

More information

D R I L L - G R I N D E R S BL 13D-2

D R I L L - G R I N D E R S BL 13D-2 D R I L L - G R I N D E R S BL 13D-2 2 Table of contents 1. General safety rules for all machines 3 2. Additional safety rules 4 3. Features 4 4. Specification 4 5. Operation 4 5.1 Assemble the fixture

More information

VARIABLE SPEED WOOD LATHE

VARIABLE SPEED WOOD LATHE MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02

More information

Assembly Instructions and Parts Manual 5C Collet Closer for ZX Series Lathes Model CC-ZX

Assembly Instructions and Parts Manual 5C Collet Closer for ZX Series Lathes Model CC-ZX Assembly Instructions and Parts Manual 5C Collet Closer for ZX Series Lathes Model CC-ZX JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321292 Ph.: 800-274-6848 Revision B 03/2014 www.jettools.com

More information

DRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710

DRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710 DRILL BIT SHARPENER MODEL NO: CBS43 PART NO: 6480232 OPERATION & MAINTENANCE INSTRUCTIONS LS0710 INTRODUCTION Thank you for purchasing this CLARKE drill bit sharpener. Before attempting to use this product,

More information

WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!

WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! ! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced

More information

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI

EllisSaw.com. EllisSaw.com P.O. Box Verona, WI P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.

More information

Inventory (Figure 2) Copyright November, 2007 By Grizzly Industrial, Inc. Revised MAY, 2011 (JB)

Inventory (Figure 2) Copyright November, 2007 By Grizzly Industrial, Inc. Revised MAY, 2011 (JB) MODEL T10024 ACCESSORY KIT #2 FOR T10010/T10097 WET GRINDER INSTRUCTION SHEET Introduction The Model T10024 Accessory Kit #2 for the Model T10010/T10097 Wet Grinder helps sharpen chisels and dress grinding

More information

LBUFFSE. Pen Finishing Station. User s Manual. APPLICATIONS: Sanding, finishing or polishing of wood, acrylic, or polymer clay pen blanks.

LBUFFSE. Pen Finishing Station. User s Manual. APPLICATIONS: Sanding, finishing or polishing of wood, acrylic, or polymer clay pen blanks. LBUFFSE Pen Finishing Station User s Manual APPLICATIONS: Sanding, finishing or polishing of wood, acrylic, or polymer clay pen blanks. WARRANTY This product is warranted against defects in materials and

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS II system consists of three

More information

Hinge Boring/Insertion Machine Set Up And Operation Instructions

Hinge Boring/Insertion Machine Set Up And Operation Instructions Hinge Boring/Insertion Machine Set Up And Operation Instructions Manufactured In The USA By: Thompson Industries, Inc. 1018 Crosby Avenue, Sycamore, IL. 60178-0127 Ph:815-899-6670 Fax:815-899-1918 Thank

More information

Drill Bit Sharpening Attachment. Parts

Drill Bit Sharpening Attachment. Parts Parts Base Plate Guide Drill Holder Setting Template Magnifier Instruction Drill Bit Sharpening Attachment With the patented Tormek Drill Bit Sharpening Attachment DBS-22, you can sharpen your drill bits

More information

VARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL

VARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4

More information

MODEL SETUP & OPERATION MANUAL DOVETAIL JIG FEATURES SPECIFICATIONS

MODEL SETUP & OPERATION MANUAL DOVETAIL JIG FEATURES SPECIFICATIONS SETUP & OPERATION MANUAL FEATURES Male and female dovetail joints are cut simultaneously, to ensure perfectly matched dovetail joints. Side stops provided, allow repeated precise dovetail joint cutting

More information

CT Box and Pan Brake User Manual

CT Box and Pan Brake User Manual CT153 12 Box and Pan Brake User Manual Important Safety Precautions Plead read all the instructions before using this tool. 1) Always keep your work area clean. Cluttered areas invite injuries. 2) Do not

More information

Twist Drill Grinder. Operation Manual. Model : GS-21 / GS-34

Twist Drill Grinder. Operation Manual. Model : GS-21 / GS-34 Twist Drill Grinder Operation Manual Model : GS-21 / GS-34 RECYCLING Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government

More information

Cut-Off Machine Model CC 14SE

Cut-Off Machine Model CC 14SE Cut-Off Machine Model CC 14SE Handling instructions NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

REQUIRED EQUIPMENT SETUP

REQUIRED EQUIPMENT SETUP #003-598 raverhone VS OPERATION AND MAINTENANCE MANUAL 24V IMPORTANT NOTICE FOR OPERATORS No user serviceable parts inside. Do not remove any outer surfaces. Do not modify this equipment or remove warning

More information

OPERATING INSTRUCTIONS AND PARTS LISTS

OPERATING INSTRUCTIONS AND PARTS LISTS 3889560 REEL ALIGNMENT GAGE OPERATING INSTRUCTIONS AND PARTS LISTS WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning

More information

Vicmarc Grinding System

Vicmarc Grinding System Vicmarc Grinding System User Manual Vicmarc Sharpening Jig Part No. V00437 Vicmarc Grinding Rest Part No. V00438 Vicmarc Machinery Pty Ltd Manufacturer of Quality Woodturning Lathes and Accessories Vicmarc

More information

Angle Grinder MODEL 9553B MODEL 9555B

Angle Grinder MODEL 9553B MODEL 9555B ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

01950 Heavy Duty Floor Standing Morticer with Cabinet

01950 Heavy Duty Floor Standing Morticer with Cabinet Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Twist Drill Grinder. Operation Manual. Model : GS-20

Twist Drill Grinder. Operation Manual. Model : GS-20 Twist Drill Grinder Operation Manual Model : GS-20 RECYCLING Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

18 GAUGE ELECTRIC METAL SHEAR

18 GAUGE ELECTRIC METAL SHEAR 241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in

More information

AUC Cell Assembly Torque Stand. User Manual

AUC Cell Assembly Torque Stand. User Manual AUC Cell Assembly Torque Stand User Manual WARRANTY Spin Analytical Inc., warrants this product to be defect free in both material and workmanship for 90 days from the date of shipment. Labor services

More information

Tapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y

Tapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring

More information

Item# " VARIABLE SPEED BENCH GRINDER USER'S MANUAL

Item#  VARIABLE SPEED BENCH GRINDER USER'S MANUAL Power Tools Item# 33309 3" VARIABLE SPEED BENCH GRINDER USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other

More information

Bench Grinder Sharpening Jig Kit

Bench Grinder Sharpening Jig Kit Owner s Manual Model No. 71021 Bench Grinder Sharpening Jig Kit Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty. Put

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS MODEL TSM-6000 FACING/SQUARING MACHINE REV 8/2011 USA Otto Arc Systems, Inc. (Corporate/Sales/Mfg. Division) 3921 Sandstone Drive El Dorado Hills, California 95762 Phone: (916) 939-3400

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING CUT-OFF MACHINE GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

INSTRUCTION BOOK AND PARTS LIST

INSTRUCTION BOOK AND PARTS LIST Rag Cutter MODEL WE WARNING This machine is equipped with a very sharp knife. Keep hands, arms, and hair away from the knife area at all times. Misuse of this machine or failure to follow all safety instructions

More information

Assembly Instructions and Parts Manual Taper Attachment for Bench Lathes Model TAK-13GH/BD

Assembly Instructions and Parts Manual Taper Attachment for Bench Lathes Model TAK-13GH/BD Assembly Instructions and Parts Manual Taper Attachment for Bench Lathes Model TAK-13GH/BD JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-321442 Ph.: 800-274-6848 Revision B 03/2014 www.jettools.com

More information

MODEL SETUP & OPERATION MANUAL DOVETAIL JIG FEATURES

MODEL SETUP & OPERATION MANUAL DOVETAIL JIG FEATURES SETUP & OPERATION MANUAL FEATURES New clamping system for greater accuracy. Lockable template height for a stable platform for the router. Cuts precision matching dovetails with the same accuracy found

More information

6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL

6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL 4511 WAYNE AVENUE PHILADELPHIA PA 19144 TEL: 888-800-2663 FAX: 800-582-9643 6 BLADE CUTTER MODEL # PCC-6 OPERATION MANUAL CONTENTS I. INTRODUCTION TO BOND PCC-6 / MACHINE SPECIFICATIONS II. SAFETY PRECAUTIONS

More information

Grinding drill machine OPERATION MANUAL - 1 -

Grinding drill machine OPERATION MANUAL - 1 - Grinding drill machine OPERATION MANUAL - 1 - Index: I. Safety Notification P.4 II. Machine Devices Introduction P.9 III. Machine Installation Instruction P.11 IV. Standard Operational Steps P.13 V. Replacement

More information

Brochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening. Patent 3,952,459

Brochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening. Patent 3,952,459 Patent 3,952,459 Brochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening Accurately Sharpens most drills bits. Now, with this one low-cost, simple machine,

More information

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Shop Style Miter Saw Stand Kit

Shop Style Miter Saw Stand Kit Quality Power Tool Accessories OWNER S MANUAL Assembled Unit Shown Without Shelves & Wings Assembled With Shelves & Wings Shop Style Miter Saw Stand Kit Model 2850 IMPORTANT Read and understand all safety

More information

Quick Set Dovetail Jig

Quick Set Dovetail Jig Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

OWNER S MANUAL CT058 8 JOINTER

OWNER S MANUAL CT058 8 JOINTER OWNER S MANUAL CT058 8 JOINTER Index General Safety Instructions Page 3 Specific Safety Instructions Page 4 CT058 Jointer Features Page 5 Illustrated Features Page 6 Unpacking Page 7 Assembly Assembling

More information

ALL-STAR GRINDER G-8 MANUAL

ALL-STAR GRINDER G-8 MANUAL ALL-STAR GRINDER G-8 MANUAL IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS FOR PERSONAL SAFETY THIS MACHINE MUST BE PROPERLY GROUNDED The power cord of this machine is equipped with a three-prong

More information

College of Forestry 610: Power Tools

College of Forestry 610: Power Tools College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide

More information

Professionally Sharpen Rotary Blades US Patent # 7,008,307 B2. Warning

Professionally Sharpen Rotary Blades US Patent # 7,008,307 B2. Warning Rotary Blade Sharpener Manual Professionally Sharpen Rotary Blades US Patent # 7,008,307 B2 Warning You must thoroughly read and understand this manual before operating or servicing the equipment, paying

More information

TURNING TOOLS CARVING TOOLS

TURNING TOOLS CARVING TOOLS Multi Jig SVS-50 (37592) TURNING TOOLS Square and skew chisels with straight or curved edges. Max width 32 mm (1¼"). Parting tools Beading tools Roughing gouges Max width 50 mm (2"). CARVING TOOLS Gouges,

More information

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max)

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max) 1 1 2 2 3 3 82mm (Max) 12mm (Max) 12mm (Max) 6mm (Max) 4 4 5 6 8 6mm (Max) 0.5 0mm 1 5 6 7 7 8 9 9 A = B 10 11 12 D B 1 13 14 15 0 C A D E 16 17 18 F G D B N H J G I K 19 A 20 G L 21 C K 1mm L M 1mm 22

More information

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS III system consists of three

More information

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine.

Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. Due to possible damage in shipping, the vertical stop assembly has been removed from this machine. To assemble, insert the threaded rod through the shroud opening in the top of the machine. Start the four

More information

NOVA CHUCK ACCESSORY PEN PLUS JAW MANUAL MARCH COPYRIGHT 2013 Teknatool International Ltd. All rights reserved.

NOVA CHUCK ACCESSORY PEN PLUS JAW MANUAL MARCH COPYRIGHT 2013 Teknatool International Ltd. All rights reserved. NOVA CHUCK ACCESSORY PEN PLUS JAW MANUAL MARCH 2013 94-0313-021 2013 COPYRIGHT 2013 Teknatool International Ltd. All rights reserved. TEKNATOOL INTERNATIONAL LTD P.O. BOX 305378 TRITON PLAZA NORTH SHORE,

More information

Agricultural Mechanics and Technology Power Tool Safety Rules

Agricultural Mechanics and Technology Power Tool Safety Rules Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust

More information

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty Please read this owner s manual before use and keep it at hand for reference. OWNER S MANUAL Safety Important safety instructions for using the INCRA Miter5000 Before using the INCRA Miter5000, read and

More information

GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

OWNER'S MANUAL JST-48 Sliding Table

OWNER'S MANUAL JST-48 Sliding Table OWNER'S MANUAL JST-48 Sliding Table (shown mounted on JET 708663PK) JET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000 A WMH Company Auburn, WA 98071-1349 Fax: 1-800-274-6840 www.jettools.com

More information

MODELS 49 RA 49 RAZ 49 RAC

MODELS 49 RA 49 RAZ 49 RAC General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)

More information

Sink BULL INSTRUCTION MANUAL. with Rapid Z -CUT & Rapid Z -DRUM

Sink BULL INSTRUCTION MANUAL. with Rapid Z -CUT & Rapid Z -DRUM Sink BULL with Rapid Z -CUT & Rapid Z -DRUM INSTRUCTION MANUAL Please read this instruction manual thoroughly to ensure safety and the correct use of this tool. Keep this manual in a place where operators

More information

Grizzly Drill Press SOP

Grizzly Drill Press SOP Grizzly Drill Press SOP Drill Press is wired to run on 0V. Drill Press has a built in light with a ON/OFF switch. Never hold a workpiece by hand while drilling. Clamp it down or hold it in a vice. Never

More information

154570/220 5/17/02 1:41 PM Page 3. Instruction Manual Variable Speed Orbital Action Jig Saw

154570/220 5/17/02 1:41 PM Page 3. Instruction Manual Variable Speed Orbital Action Jig Saw 154570/220 5/17/02 1:41 PM Page 3 Instruction Manual 3157-220 Variable Speed Orbital Action Jig Saw 154570/220 5/17/02 1:41 PM Page 4 Getting the most out of your tool. Please take time to read this manual

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013

More information

OPERATOR S MANUAL FOR MODEL BLADE GRINDER

OPERATOR S MANUAL FOR MODEL BLADE GRINDER OPERATOR S MANUAL FOR MODEL 88-021 BLADE GRINDER Table of Contents Page Blade Grinder Safety and User Instructions 2 Unpacking the Grinder 5 Assembling the grinder 6 Adjusting the grinding angle 8 Adjusting

More information

ROTARY HAMMER OWNER'S MANUAL

ROTARY HAMMER OWNER'S MANUAL ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

OWNER S MANUAL. But that s just half the story. The fence INCRA Miter Gauge really does work

OWNER S MANUAL. But that s just half the story. The fence INCRA Miter Gauge really does work From the makers of the INCRA JIG! Please read this owner s manual before use and keep it at hand for reference. Your new INCRA Miter Gauge at long last solves that frustrating problem all too familiar

More information

x 43 Wood Lathe

x 43 Wood Lathe Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Trautman Carvers. Product Manual

Trautman Carvers. Product Manual Trautman Carvers Product Manual Contents Product Specifications.... 4 Operating Precautions.... 6 Floor Carver Use.... 7 Floor Carver Diagram.... 10 Trautman Motor Lift Assist.... 11 Use of the Lift Assist....

More information

SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL

SAVE THIS FOR FUTURE REFERENCE   THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL DENTAL, INC. TECHNICAL BULLETIN G801-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427-0106 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com

More information

DRILL BIT GRINDER MODEL: MR-26A

DRILL BIT GRINDER MODEL: MR-26A DRILL BIT GRINDER MODEL: MR-26A OPERATION INSTRUCTION INTRODUCTION SOME SAFETY ISSUES Common sense and caution are factors which can t be built into any product.these factors must be supplied by the operator.

More information

7th/8th Grade Industrial Tech General Safety. Give your undivided attention to the machine in which you are using.

7th/8th Grade Industrial Tech General Safety. Give your undivided attention to the machine in which you are using. 7th/8th Grade Industrial Tech General Safety Wood Lab Safety General Safety Always wear safety glasses. Report all injuries to the instructor. No baggy clothing or open toed shoes. Give your undivided

More information

Mortising Attachment

Mortising Attachment Mortising Attachment Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

HOLE CUTTER SHARPENER ASSEMBLY & SERVICE MANUAL

HOLE CUTTER SHARPENER ASSEMBLY & SERVICE MANUAL HOLE CUTTER SHARPENER ASSEMBLY & SERVICE MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety instructions.

More information

REEL BLADE / BED KNIFE ADJUSTING & SHARPENING

REEL BLADE / BED KNIFE ADJUSTING & SHARPENING Here s a QR code image that can be used to access this document on a portable device. Reel Mower Cutting Fundamentals The reel mower s cutting ability is the result of the corner edges of the reel blade

More information

.com. More than a machine. Power your life. Operating Manual

.com. More than a machine. Power your life. Operating Manual Operating Manual www.maxnovomachine +86-514-87892928 info@maxnovomachine Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical

More information

ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. INDUSTRIAL RIP FENCE SYSTEM MODELS KRF-10/30L12-30 CONTRACTOR SAWS KRF-10/52L12-52 CONTRACTOR SAWS KRF-100/T50L12-50 CABINET SAWS INSTRUCTION MANUAL COPYRIGHT C 2000 ALL RIGHTS RESERVED BY KING CANADA

More information

Handling instructions

Handling instructions Router Model M 2SC Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these

More information

Finger Jointer. Operating and Safety Instructions FJA300

Finger Jointer.  Operating and Safety Instructions FJA300 Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8266

More information

OPERATOR'S MANUAL ROUTER MOUNTING KIT

OPERATOR'S MANUAL ROUTER MOUNTING KIT OPERATOR'S MANUAL MOUNTING KIT 4950301 (FOR USE WITH BT3000 AND BT3100 TABLE SAWS) Your new router mounting kit has been engineered and manufactured to Ryobi's high standard for dependability, ease of

More information

MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support:

MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support: MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz #6727BL COPYRIGHT JANUARY, 2005 BY WOODSTOCK INTERNATIONAL, INC.

More information

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #

Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set # Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com

More information

Angle Grinder. Model Visit our website at:

Angle Grinder. Model Visit our website at: Angle Grinder Safety Guard Model 45921 Installation Instructions Note: Cutting Blade and Angle Grinder sold separately. Visit our website at: http://www.harborfreight.com Read this material before using

More information

OWNER S MANUAL FLOATING DUST COLLECTION GUARD MODEL TSG-FDC

OWNER S MANUAL FLOATING DUST COLLECTION GUARD MODEL TSG-FDC OWNER S MANUAL FLOATING DUST COLLECTION GUARD MODEL TSG-FDC Copyright SawStop, LLC All Rights Reserved 2nd printing, November 2017 Updates of this manual may be available at www.sawstop.com The saw shown

More information

OPERATOR S MANUAL Model 77E Pneumatic Cable Stripper

OPERATOR S MANUAL Model 77E Pneumatic Cable Stripper 110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 77E Pneumatic Cable Stripper PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com

More information

Sunset Swings By Health in Motion, LLC

Sunset Swings By Health in Motion, LLC Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation

More information

Video Wall Installation Instructions 2W X 3H, 3W X 3H

Video Wall Installation Instructions 2W X 3H, 3W X 3H Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...

More information

Menu Board Tilt or Fixed Mount Installation Instructions MDS1T-200, MDS1T-300, MDS1T-400 MDS2T-200, MDS2T-300, MDS2T-400 MDS3T-200, MDS3T-300, MDS3T-400 MDS4T-200, MDS4T-300, MDS4T-400 MDS5T-200, MDS5T-300,

More information

TurncrafterPlus. Variable Speed Mini Wood Lathe. User s Manual #TCLPLUS PRODUCT NO.

TurncrafterPlus. Variable Speed Mini Wood Lathe. User s Manual #TCLPLUS PRODUCT NO. TurncrafterPlus Variable Speed Mini Wood Lathe PRODUCT NO. #TCLPLUS User s Manual SPECIFICATIONS OF TURNCRAFTER PLUS MINI LATHE Model number:..............................................#tclplus Motor:......................................0V

More information

Durham Woodworking Club. January 25, 2016

Durham Woodworking Club. January 25, 2016 Durham Woodworking Club January 25, 2016 The drill press has primarily been a metal working machine since its first incarnation. The purpose of the modern day drill press has been to provide woodworkers

More information

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual

Outdoor Water Solutions, Inc. 9 Backyard Windmill. Installation Manual Outdoor Water Solutions, Inc. 9 Backyard Windmill Installation Manual Customer Service: -866-7-6 Website: www.outdoorwatersolutions.com Springdale, Arkansas 72762 Phone: -866-7-6 Fax: (79) 750-978 Thank

More information

User s Manual. A highly versatile chuck featuring easy to attach and release jaws for midi- and full-sized woodworking lathes

User s Manual. A highly versatile chuck featuring easy to attach and release jaws for midi- and full-sized woodworking lathes User s Manual Barracuda 5 Quick-Change Jaw System Chuck A highly versatile chuck featuring easy to attach and release jaws for midi- and full-sized woodworking lathes #CSCBARR5 IMPORTANT: Read this manual

More information

Custom Bench Plane. Honing and Polishing the Blade. Blade Carrier

Custom Bench Plane. Honing and Polishing the Blade. Blade Carrier Custom Bench Plane U.S. Pat. No. 7,603,783 Your Veritas bench plane has been assembled with the component options you selected when you placed your order. Caution: Be aware that the blade is sharp; careless

More information

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL

SawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized

More information

x 36 Wood Lathe

x 36 Wood Lathe Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

ARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO

ARROW SAW PRECISE CUT 8000 RPM WITH DUST COLLECTING ATTACHMENT INSTRUCTION BOOK MODEL NO ATTENTION If any components of this unit are broken or the unit does not operate properly, please contact Cabela s Customer Service. Retail Store Purchases: 1-800-905-2731 (U.S. & Canada) Catalog and Internet

More information

CX HEAVY DUTY BENCHTOP GRINDER User Manual

CX HEAVY DUTY BENCHTOP GRINDER User Manual CX900 10 HEAVY DUTY BENCHTOP GRINDER User Manual TABLE OF CONTENTS General Safety Instructions for Machines... 3 Specific Safety Instructions... 4 CX900 Features... 5 Physical Features... 6 Proper Grounding...

More information

The Useless Machine. DIY Soldering Edition. Instruction Guide v0004

The Useless Machine. DIY Soldering Edition. Instruction Guide v0004 The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering

More information

SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL

SAVE THIS FOR FUTURE REFERENCE   THIS PRODUCT IS FOR PROFESSIONAL LABORATORY USE ONLY USER'S MANUAL DENTAL, INC. TECHNICAL BULLETIN Q827-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE www.wellsdental.com

More information

SHRINKER/STRETCHER SET Create radius bends and contours in sheet metal

SHRINKER/STRETCHER SET Create radius bends and contours in sheet metal Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information