HARDWOOD CLOSET SYSTEM

Size: px

Start display at page:

Download "HARDWOOD CLOSET SYSTEM"

Cornelius Miller
5 years ago
Views:

ITEM #0020720 HARDWOOD CLOSET SYSTEM MODEL #WSCO-72C-AR ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing

1 ITEM # HARDWOOD CLOSET SYSTEM MODEL #WSCO-72C-AR ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at , 8:30 a.m. 4:30 p.m., PST, Monday to Friday. 1

2 TABLE OF CONTENTS Safety Information... 3 Package Contents Hardware Contents Assembly Instructions.. 7 Warranty Replacement Parts List

3 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at , 8:30 a.m. 4:30 p.m., PST, Monday to Friday. WARNING Maximum weights indicated. Use with other products or products heavier than the maximum weights indicated may result in instability causing possible injuries. MAXIMUM LOAD: 30 LBS MAXIMUM LOAD: 100 LBS CAUTION Unit must be attached securely to the wall for the safety and stability. Do not use drawers as a ladder. Do not step on drawers. 3

4 PACKAGE CONTENTS H C I M K B J D E A F G L PART DESCRIPTION QUANTITY A Hutch Panel Left 1 B Hutch Panel Right 1 C Hutch Panel Top 1 D Front Stretcher 1 E Rear Stretcher 1 F Adjustable Shelf 1 G Hutch Panel Bottom 1 CAPPUCCINO UNIT H Hutch Panel Back 1 T PART DESCRIPTION QUANTITY I Base Panel Top 1 J Base Panel Left 1 K Base Panel Right 1 L Base Panel Bottom 1 M Base Panel Back 1 P R N S U Q O PART DESCRIPTION QUANTITY T Long Shelf 2 U Metal Pole 3 4 PART DESCRIPTION QUANTITY N Drawer Panel Face 3 O Drawer Panel Front 3 P Drawer Panel Back 3 Q Drawer Panel Left 3 R Drawer Panel Right 3 S Drawer Bottom 3

5 HARDWARE CONTENTS (shown actual size) AA BB CC DD EE M3 x 13 mm Sunk Screw Qty. 4 M3 x 16 mm Qty. 96 M4 x 16 mm Qty. 38 M4 5 mm Bolt Qty. 6 M4 x 38 mm Qty. 14 FF GG HH II JJ M6 5 mm Bolt Small Flat Washer Qty. 12 Large Flat Washer Qty. 2 Pole Holder Qty. 3 Qty. 12 M8 x 3 in. Lag Bolt Qty. 2 KK NN OO Closed Pole Holder Qty. 3 Large Cam Lock Qty. 26 Large Cam Bolt Qty. 26 Small Cam Lock Qty. 24 Small Cam Bolt Qty. 24 5

6 HARDWARE CONTENTS (shown actual size) PP RR SS TT Shelf Holder Qty. 4 Wood Dowel Qty. 20 Plastic Corner Qty. 2 L Bracket Qty. 8 Anchor Qty. 14 UU Drawer Handle Qty. 3 PREPARATION Before beginning assembly of this product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 59 minutes Tools Required for Assembly (not included): Phillips screwdriver, power drill, 3/16 in. bit, 3/8 in. bit, and 1/2 in. socket wrench 6

7 1. Insert wood dowel () in holes without threaded inserts into base panel right (K). Attach base panel bottom (L) to base panel right (K) by connecting large cam lock () with large cam bolt (). Operate cam kits in this way: 1) Screw cam bolts () in base panel right (K) 2) Push cam locks () in base panel bottom (L) 3) Connect both and secure cam locks () 1 L K Large Cam Bolt Wood Dowel Large Cam Lock 2. Insert wood dowels () into top holes of base panel right (K). Attach base panel top (I) to base panel right (K) by connecting large cam bolts () with large cam locks (). Make sure both are flush with each other from back side. 2 K Operate cam kits in this way: 1) Screw cam bolts () in base panel right (K) 2) Push cam locks () in base panel top (I) 3) Connect both and secure cam locks () I Large Cam Bolt Wood Dowel Large Cam Lock 7

8 3. Have base panel left (J) assembled by connecting large cam bolts () with large cam locks (). After that, attach two plastic corners (RR) only to front corners using M4 x 16 mm wood screws (CC) to strengthen base structure. 3 I CC RR Operate cam kits in this way: 1) Screw cam bolts () in base panel left (J) 2) Push cam locks () in both base panel bottom (L) and base panel top (I) 3) Connect both and secure cam locks () J L Large Cam Bolt Wood Dowel Large Cam Lock CC M4 x 16 mm x 8 RR Plastic Corner 4. Assemble base panel back (M) using M3 x 16 mm wood screws (BB) through pilot holes. 4 BB M BB M3 x 16 mm 4 8

9 5. Attach both drawer panel front (O) and 5 drawer panel back (P) to drawer panel right (R) by connecting small cam bolts (OO) with small cam locks (NN); attach drawer panel left (Q) to both drawer panel front (O) and drawer panel back (P) by connecting small cam bolts (OO) with small cam locks (NN). Operate cam kits in this way: 1) Screw cam bolts (OO) in drawer panel right (R) and drawer panel left (Q) 2) Push cam locks (NN) in drawer panel front (O) and drawer panel back (P) 3) Connect both and secure cam locks (NN) R O NN P Q OO NN Small Cam Lock x 8 OO Small Cam Bolt x 8 6. Assemble drawer panel face (N) to drawer frame using M6 5 mm bolts (FF) and small flat washer (GG). Note: There are four large holes in drawer panel front (O) to go with four small ones in drawer panel face (N) so drawer panel face (N) could be moved around to align drawers in the frame whenever necessary. 6 N GG O FF Repeat last two steps for other 2 drawers. FF M6 5 mm Bolt GG Small Flat Washer 9

10 7. Assemble drawer bottom (S) to the bottom side of drawer frame using M3 x 16 mm wood screw (BB) through pilot holes. 7 BB S BB M3 x 16 mm x Attach drawer handle (UU) to drawer panel face (N) using M4 5 mm bolts (DD). 8 DD DD M4 5 mm Bolt UU UU Drawer Handle x 1 N 10

11 9. Extend the drawer glide frames on both base panel left (J) and base panel right (K) out from the base. Align drawer glide frame and drawer tracks together. Slide the drawer glide tracks into the drawer glide frames until the drawer is completely closed. Note: If you are required to detach the drawer from the unit, first extend the drawer glides all the way out. Push the black plastic release lever of the ball bearing glide up on one side and down on the other side; then pull the drawer completely out. This will prevent any damage to the glides or drawers. 9 J Hold the lever down and pull K 10. Insert wood dowels () in holes without 10 thread inserts into hutch panel right (B). Attach hutch panel bottom (G) to hutch panel right (B) by connecting large cam bolts () with large cam locks (). Operate cam kits in this way: 1) Screw cam bolts () in hutch panel right (B) 2) Push cam locks () in hutch panel bottom (G) 3) Connect both and secure cam locks () B G Large Cam Bolt Wood Dowel Large Cam Lock 11

12 11. Insert wood dowels () in holes without thread inserts into hutch panel right (B). Assemble both front stretcher (D) and rear stretcher (E) to hutch panel right (B) by connecting large cam bolts () with large cam locks (). 11 D B Operate cam kits in this way: 1) Screw cam bolts () in hutch panel right (B) 2) Push cam locks () in both stretchers (D) and (E) 3) Connect both and secure cam locks () E Large Cam Bolt x 3 Wood Dowel Large Cam Lock x 1 x Insert wood dowels () in holes without thread inserts into hutch panel left (A). Have hutch panel left (A) assembled by connecting large cam bolts () with large cam locks (). 12 D Operate cam kits in this way: 1) Screw cam bolts () in hutch panel left (A) 2) Push cam locks () in both stretchers (D) and (E) 3) Connect both and secure cam locks () A Large Cam Bolt x 5 Wood Dowel x 3 Large Cam Lock x 5 12

13 13. Assemble hutch panel top (C) by using large cam bolts (), large cam locks (), and wood dowels (). Make sure crown beveled edges are located in front. 13 C B Operate cam kits in this way: 1) Screw cam bolts () in hutch panel top (C) 2) Push cam locks () in both hutch panel left (A) and hutch panel right (B) 3) Connect both and secure cam locks () A Large Cam Bolt Wood Dowel Large Cam Lock 14. Assemble hutch panel back (H) to hutch frame using M3 x 16 mm wood screw (BB) via pilot holes. 14 BB H BB M3 X 16 mm 4 13

14 15. Insert wood dowels () in holes without thread inserts into both base panel right (K) and base panel left (J). Have both hutch and base connected using large cam bolts () and large cam locks (). 15 B Operate cam kits in this way: 1) Screw cam bolts () in both base panel right (K) and base panel left (J) as shown 2) Push cam locks () in both hutch panel left (A) and hutch panel right (B) 3) Connect both and secure cam locks () J K Large Cam Bolt Wood Dowel Large Cam Lock 16. Place the drawer unit where you want it to be positioned. This unit must be attached to the wall. Locate a wall stud near the center of the unit. Once the stud is located, mark the center and measure from one wall. Inside the unit near the top is the rear stretcher (E) that will be used to attach the unit to the wall. Mark the location of the wall stud on the rear stretcher (E) and drill holes through stretcher and back panel using 3/16 in. bit. Attach cabinet to wall by using M8 x 3 in. lag bolts (HH) and large flat washers (II). Lastly, secure M8 x 3 in. lag bolts (HH) with 1/2 in. socket wrench. 16 E HH II II Large Flat Washer HH M8 x 3 in. Lag Bolt 14

15 17. Attach four L brackets (SS) to both ends of long shelf (T) using M4 x 16 mm wood crews (CC). 17 Level shelf in the desired location and mark the holes locations on the side wall and cabinet side. Drill holes at the marked locations on the wall using 3/8 in. bit; next, insert anchors (TT) into holes. T SS Secure one end of long shelf (T) to wall using M4 x 38 mm wood screws (EE), and the other end to cabinet side using M5 x 16 mm wood screws (CC). EE CC TT Ensure shelf is level after assembling. Repeat procedure to assemble the other long shelf (T) at the other end. T SS L Bracket x 8 SS CC CC CC M4 x 16 mm 4 EE M4 x 38 mm x 8 TT Anchor x 8 15

16 18. Level metal pole (U) at the desired location and mark the holes locations in the side wall and cabinet side; drill holes at the marked locations on the wall using 3/8 in. bit. Next, insert anchors into holes. 18 Secure a closed pole holder (KK) to side wall using M4 x 38 mm wood screws (EE), and pole holder (JJ) to cabinet side using M4 x 16 mm wood screws (CC). Ensure both holders are at the same height. Note: Place the center of the pole holder (JJ) and closed pole holder (KK) at least 10-1/2 in. from the back wall so the coat hangers will fit. EE KK TT JJ Pole Holder x 3 KK Closed Pole Holder x 3 CC M4 x 16 mm x 6 CC EE M4 x 38 mm x 6 JJ TT Anchor x Assemble adjustable shelf (F) with shelf holder (PP) at your desired height. To ensure your safety, we suggest screwing four M3 x 13 mm sunk screws (AA) through shelf holder (PP) into adjustable shelf (F). 19 F PP Shelf Holder AA PP AA M3 x 13 mm Sunk Screw 16

17 WARRANTY Warranty is restricted to original owner and proof of purchase will be required. Warranty is for one (1) year from date of purchase. Should the product be defective in material or workmanship or fail under normal use, we will repair or replace the unit at our discretion. Shipping charges to our warehouse are the responsibility of the customer. Parts required will be sent to the customer at no charge. REPLACEMENT PARTS LIST For replacement parts, call our customer service department at , 8:30 a.m. 4:30 p.m., PST, Monday to Friday. PART DESCRIPTION PART # A Hutch Panel Left HPL B Hutch Panel Right HPR C Hutch Panel Top HPT D Front Stretcher FS E Rear Stretcher RS F Adjustable Shelf AS G Hutch Panel Bottom HPB1 H Hutch Panel Back HPB2 H E C D B A F G PART DESCRIPTION PART # I Base Panel Top BPT J Base Panel Left BPL K Base Panel Right BPR J I M K L Base Panel Bottom BPB1 M Base Panel Back BPB2 L 17

18 PART DESCRIPTION PART # N Drawer Panel Face DPF1 O Drawer Panel Front DPF2 P R N P Drawer Panel Back DPB Q Drawer Panel Left DPL S R Drawer Panel Right DPR S Drawer Bottom DB Q CAPPUCCINO UNIT T O PART DESCRIPTION PART # T Long Shelf LS U Metal Pole MP U AA BB CC DD EE FF GG HH JJ KK NN OO PP II RR SS TT UU PART DESCRIPTION PART # AA M3 x13 mm Sunk Screw 13SS BB M3 x 16 mm 16WS1 CC M4 x 16 mm 16WS2 DD M4 5 mm Bolt 25B1 EE M4 x 38 mm 38WS FF M6 5 mm Bolt 25B2 GG Small Flat Washer SFW HH M8 x 3 in. Lag Bolt 3LB II Large Flat Washer LFW JJ Pole Holder PH KK Closed Pole Holder CPH 18 PART DESCRIPTION PART # Large Cam Lock LCL Large Cam Bolt LCB NN Small Cam Lock SCL OO Small Cam Bolt SCB PP Shelf Holder SH Wood Dowel WD RR Plastic Corner PC SS L Bracket LB TT Anchor A UU Drawer Handle DH Printed in China

ASSEMBLY INSTRUCTIONS

SKU # 693964 Model #WSFP46ECHD-8 ASSEMBLY INSTRUCTIONS Grafton 46 inch Media Console Infrared Electric Fireplace in Medium Brown Finish Questions, problems, missing parts? Before returning to the store,