VYTEC ARCHITECTURAL SPECIFICATIONS
|
|
- Alexis Norman
- 5 years ago
- Views:
Transcription
1 SCOPE OF WORK SECTION SIMULATED WOOD SIDING PART 1 GENERAL 1.1 SECTION INCLUDES A) Vytec Solid Vinyl Siding. B) Vytec Vinyl Accessories and Trim. C) Vytec Vinyl Soffits. 1.2 RELATED SECTIONS A) Section Rough Carpentry: Framing and Sheathing. B) Section Joint Sealers. 1.3 REFERENCES A) ASTM D-3679 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding. B) ASTM D-4477 Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit. C) ASTM D-4756 Practice for the Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit. 1.4 SUBMITTALS A) Submit under provisions of Section B) Product Data: Provide manufacturer s printed information and installation instruction on siding products and accessories. C) Selection Samples: Provide color samples of manufacturer s full range of colors. D) Verification Samples: Provide 3 samples of siding products in specified colors not less than 12 in length. 1.5 QUALITY ASSURANCE A) Quality and Performance of siding products must conform to ASTM D3679 and applicable building code. B) Installer: Provide installer with no less than 3 years of experience in like products. 1.6
2 DELIVERY, STORAGE AND HANDLING A) Deliver products to project site in original packaging. B) Store products in original packaging on flat surface under cover 1) Stack no more than 12 boxes high 2) Do not store in location where temperatures may exceed 130 degrees F 1.7 WARRANTY A) Provide manufacturer s warranty, transferable to new owners. PART 2 PRODUCTS 2.1 MANUFACTURER A) VYTEC CORPORATION 20 MOORES ROAD MALVERN, PA USA B) Substitutions: Not Permitted. 2.2 MATERIALS A) Provide siding, soffit and accessory materials that: 1) Provide elongated nailing slots on nailing flanges to allow for movement. 2) Provide factory-notch ends of horizontal panels to form overlapping joints. 3) Meet all requirements of ASTM D B) Fasteners: Galvanized nails or other corrosion resistant fasteners as specified in manufacturer s printed installation instructions. 2.3 VINYL SIDING AND TRIM NOTE: **Retain only siding type or types required for project from those listed below; delete all others. Delete Type designation from paragraph if only one type siding required for project; coordinate Type designation with drawing if more than one type siding required for project. Determine method of color selection; delete alternative text under each siding type. i. Vytec Prestige D4.5 Vinyl Siding ii. Vytec Prestige D4.5 DL Vinyl Siding iii. Vytec Prestige D5 DL Vinyl Siding i. Double 4-1/2 Traditional, Low Gloss, Oak wood grain finish ii. Double 4-1/2 Dutch Lap, Low Gloss, Oak wood grain finish iii. Double 5 Dutch Lap, Low Gloss, Oak wood grain finish iv. Double rolled over nail hem
3 VYTEC ARCHITECTURAL SPECIFICATIONS i. Average Thickness: inch, plus or minus inch ii. Butt height:.560 inch ( mm) D4.5;.500 inch (12.7 mm) D4.5 DL;.650 inch (16.51 mm) D5 DL, nominal iii. Piece length: 12 feet 11-1/8 inch (3.94 m) D4.5 & D4.5 DL; 12 feet 11-1/2 inch (3.94 m) D5, nominal iv. Exposure: 9 inches (228 mm) D4.5 & D4.5 DL; 10 inches (250 mm) D5, nominal v. Color: Antique Ivory, Autumn Ash Autumn Leaf, Canyon Ridge, Castle Stone, Clipper Gray, Desert, Forest, Harbour, Irish Linen, Lakeshore Blue, Maplewood Sierra Brown, Redwood, Rustic Clay, Rustic Oak, Shoreline, Smokestone, Spring Meadow, Tundra Moss, Twilight Gray, White Color: B) Vinyl Siding Type : i. Vytec Proside D4.5 Vinyl Siding ii. Vytec Proside D4.5 DL Vinyl Siding iii. Vytec Proside D4.0 Vinyl Siding iv. Vytec Proside Single 8 Vinyl Siding i. Double 4-1/2 Traditional, Low Gloss, Single row nailing hem, Maple wood grain finish ii. Double 4-1/2 Dutch Lap, Low Gloss, Single row nailing hem, Maple wood grain finish iii. Double 4.0 Traditional, Low Gloss, Single row nailing hem, Maple wood grain finish iv. Single row 8 Traditional, Regular Gloss, Single row nailing hem, Maple wood grain finish i. Average Thickness: inch, plus or minus inch-d4.5 & D4.5 DL inch, plus or minus inch-single row 8 ii. Butt height:.560 inch ( mm) D4.5 & D4;.440 inch ( mm) D4.5 DL;.650 inch (16.51 mm),- Single row 8, nominal iii. Piece length: 12 feet 11-1/8 inch (3.94 m) D4.5 & D4.5 DL; 12 feet 3-5/8 inch (3.75 m) 8 & D4, nominal iv. Exposure: 9 inches (228 mm) D4.5 & D4.5 DL; 8 inches (203 mm)- 8 & D4, nominal v. Color: Antique Ivory, Autumn Ash. Castle Stone, Clipper Gray, Desert, Horizon Blue, Irish Linen, Lakeshore Blue, Maplewood, Natural Sand, Rustic Clay, Sierra Brown, Spring Meadow, Tundra Moss, Twilight Gray, White
4 Color: C) Vinyl Siding Type : i. Vytec Nantucket D4 Vinyl Siding ii. Vytec Nantucket D4 DL Vinyl Siding iii. Vytec Nantucket D4.5 DL Vinyl Siding i. Double 4 Traditional, Low Gloss, Single row nailing hem, Cedar Wood grain finish ii. Double 4 Dutch Lap, Low Gloss, Single row nailing hem, Cedar Wood grain finish iii. Double 4-1/2 Dutch Lap, Low Gloss, Single row nailing hem, Cedar Wood grain finish i. Average Thickness: inch, plus or minus inch ii. Butt height:.560 inch ( mm) D4;.445 inch ( mm) D4 DL;.500 inch (12.7 mm) D4.5 DL, nominal iii. Piece length: 12 feet 3-5/8 inch (3.75 m) D4 & D4 DL 12 feet 11-1/8 inch (3.94 m) D4.5 DL, nominal iv. Exposure: inches (200 mm) D4; inches (200 mm) D4 DL; 9 inches (228 mm) D4.5 DL, nominal v. Color: Antique Ivory, Autumn Ash. Clipper Gray, Grasslands, Horizon Blue, Irish Linen, Maplewood, Natural Sand, Rustic Clay, Sierra Brown, Spring Meadow, Tundra Moss, Twilight Gray, White Color: D) Vinyl Siding Type : i. Vytec Bayside Beaded Vinyl Siding i. Single row 6-1/2 with Bead on bottom of panel, single row nailing hem, brushed finish i. Average Thickness: inch, plus or minus inch ii. Butt height:.625 inch (15.88 mm), nominal iii. Piece length: 12 feet 4 inch (3.76 m), nominal iv. Exposure: 6.5 inches (16.51 cm), nominal v. Color: Desert, Horizon Blue, Rustic Clay, Sierra Brown, Tundra Moss, Twilight Gray, White Color
5 E) Vinyl Siding Type : i. Vytec Board & Batten Vinyl Siding i. Single 7 Vertical panel, Single row nailing hem, Oak wood grain finish. i. Average Thickness: inch, plus or minus inch ii. Butt height:.5 inch (13 mm), nominal iii. Piece length: 10 feet (3.048 m), nominal iv. Exposure: 7 inches (177.8 mm), nominal v. Color: Castle Stone, Forest, Harbour, Redwood, Rustic Clay, Rustic Oak, Shoreline,Sierra Brown, Smokestone, Tundra Moss, White Color 2.4 VINYL SOFFIT & PORCH PANELS NOTE: **Retain only soffit type or types required for project from those listed below; delete all others. Delete Type designation from paragraph if only one type soffit required for project; coordinate Type designation with drawings if more than one type soffit required for project. Determine method of color selections; delete alternative text under each soffit type. A) Vinyl Soffit Type : a. Acceptable Product: i. Vytec Beaded Porch Panel Triple 2-2/3 Solid b. Product Description: i. Triple 2-2/3 Profile with bead in profile to give a customized look, single row nailing hem. e. Physical Characteristics: i. Average Thickness: inch, plus or minus inch ii. Butt height:.375 inch (9.5 mm), nominal iii. Piece length: 12 feet ( 3.65 m), nominal iv. Exposure: 8 inches (203.2 mm), nominal v. Color: Irish Linen, Rustic Clay, Sierra Brown, White Color B) Vinyl Soffit Type : a. Acceptable Product: i. Vytec Double 5 Select Solid Vinyl Soffit ii. Vytec Double 5 Select Full Vent Vinyl Soffit b. Product Description: i. Double 5 panel, Single nailing hem, Cedar wood grain finish c. Physical Characteristics: i. Average Thickness: inch, plus or minus inch
6 ii. Butt height:.520 inch (13.208mm), nominal iii. Piece length: 12 feet ( 3.65 m), nominal iv. Exposure: 10 inches (254 mm), nominal v. Color: Antique Ivory, Castle Stone, Clipper Gray, Desert, Irish Linen, Rustic Clay, Sierra Brown, White Color C) Vinyl Soffit Type : a. Acceptable Product: i. Vytec T4 Solid Vinyl Soffit ii. Vytec T4 Center Vent Vinyl Soffit iii. Vytec T4 Full Vent Vinyl Soffit b. Product Description: i. Triple 4 panels, Single nailing hem, Maple wood grain finish c. Physical Characteristics: i. Average Thickness: inch, plus or minus inch ii. Butt height:.400 inch (10.16 mm), nominal iii. Piece length: 12 feet (3.65 m), nominal iv. Exposure: 12 inches (305 mm), nominal v. Color: Antique Ivory, Autumn Ash, Castle Stone, Clipper Gray, Desert, Grasslands, Horizon Blue, Irish Linen, Maplewood, Musket Brown*, Natural Sand, Rustic Clay, Sierra Brown, Tundra Moss, Twilight Gray, White Color Available in T4 Center Vent 2.5 VINYL ACCESSORIES A) Provide coordinating vinyl accessories for complete and proper installation, whether or not specifically shown on the drawings. B) Color: Provide accessories in color matching adjacent siding or soffit panels. C) Color: Provide accessories in contrasting color, as follows:. D) Profiles: Provide types as indicated on the drawings. E) Schedule or Accessories a. Start Strip: Vinyl b. Utility/Undersill trim: Standard type. c. Outside corners: Single piece corner & 6 Insulated Corner (20 ). d. Inside Corner Post. e. Soffit trim: F-channel & H-Channel. f. J-Channels: ½, 5/8 and ¾ wide face. PART 3 EXECUTION 3.1 EXAMINATION
7 A) Prior to commencing installation, verify governing dimensions of building and condition of substrate. 3.2 PREPARATION A) Examine, clean and repair as necessary any substrate conditions which would be detrimental to proper installation. B) Do not begin installation until unacceptable conditions have been corrected. 3.3 INSTALLATION A) General: Install products in accordance with the latest printed instructions of the manufacturer, with all components true and plumb. B) Nailing: Nail horizontal panels by placing nail in center of slot. Nail vertical panels by placing first nail at top of top slot and remaining nails in center of slots. Drive nails straight, leaving 1/16 inch space between nail head and flange of panel. C) Stapling: Staple horizontal panels by resting head of stapler onto nail hem. Shoot staple legs into the center and top of nail slots, leaving 1/16 inch space between the staple crown and flange of panel. D) Spacing: Allow space between both ends of siding panels and trim for thermal movement. Overlap horizontal panel ends one-half the width of factory pre-cut notches. E) Joints in Horizontal Siding: Stagger lap joints in uniform pattern as successive courses of siding are installed. F) Joints in Vertical Siding: Install J-channel and flashing to accommodate successive courses of vertical siding. Install wood shims at building corners to bring cut edges of vertical siding out to correct plane. 3.4 CLEANING A) At completion of work, remove debris caused by siding installation from project site.
A. ASTM D Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
SECTION 074600 VINYL SIDING PART 1 GENERAL 1.1 SECTION INCLUDES A. Vinyl siding. B. Vinyl soffits. C. Accessories and trim. 1.2 RELATED SECTIONS A. Section 06100 - Framing and Sheathing. B. Section 07260
More informationSECTION LAP SIDING. A. Fiber cement lap siding, panels, single, trim, fascia, moulding and accessories.
SECTION 07460 LAP SIDING PART 1 GENERAL 1.1 SECTION INCLUDES A. Fiber cement lap siding, panels, single, trim, fascia, moulding and accessories. B. Factory-finished fiber cement lap siding, panels, single,
More informationSlate Shingle Specifications
Slate Shingle Specifications California Slate is a proud member of the Slate Roofing Contractors Association of North America, Inc. (SRCA) which publishes Section 07310 Slate Shingles setting forth architectural
More informationSECTION SLATE SHINGLES. 1.1 SUMMARY A. Section Includes: 1. Slate shingles over underlayment nailed to roof sheathing.
SECTION 07 31 26 SLATE SHINGLES SPEC WRITER NOTES: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Slate shingles
More informationB. Related Sections: The following Sections contain requirements that relate to this Section:
SECTION 07311 - ASPHALT SHINGLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSECTION PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY
SECTION 07312 PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Dominica PVC thatch shingles. 2. Self- adhering sheet underlayment. B. Related
More informationAsh Brook Golf Course Scotch Plains, New Jersey
SECTION 062013 - EXTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information1.04 QUALITY ASSURANCE
SECTION 07312 ARCHITECTURAL ASPHALT SHINGLES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More information4. Metal roof jacks at penetrations and attachments
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SECTION 07 61 00 METAL SHINGLE ROOFING - - - - - - - - - - -
More informationOdyssey Plus. Premium Vinyl Siding. P e r f e c t f o r e v e r y p r o j e c t.
O Q u a l i t y e x t e r i o r p r o d u c t s w i t h e a s y - c a r e c o n v e n i e n c e. Odyssey Plus Premium Vinyl Siding P e r f e c t f o r e v e r y p r o j e c t. 2 O Odyssey Plus is the perfect
More informationD D e s i g n e d f o r l a s t i n g d i s t i n c t i o n. C e n t e r L o c k.
C D o u b l e l o c k e d. Fo r t w i c e t h e b e a u t y, q u a l i t y a n d s a t i s f a c t i o n. CenterLock Premium Vinyl Siding CenterLock Premium Vinyl Siding captures all the beauty of a traditional
More informationAIA Specification. Section Slate Shingles PART 1 GENERAL
AIA Specification Section 07315 Slate Shingles PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationInstallation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes
Installation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes General Guidelines These instructions show one type of installation and are intended for the professional
More informationROOFING APPLICATION STANDARD (RAS) No. 115 STANDARD PROCEDURES FOR ASPHALTIC SHINGLE INSTALLATION
ROOFING APPLICATION STANDARD (RAS) No. 115 STANDARD PROCEDURES FOR ASPHALTIC SHINGLE INSTALLATION 1. Scope 4. Underlayment 2. 1.1 This roofing application standard has been developed to provide a responsive
More informationROOFING APPLICATION STANDARD (RAS) No. 115 STANDARD PROCEDURES FOR ASPHALTIC SHINGLE INSTALLATION
ROOFING APPLICATION STANDARD (RAS) No. 115 STANDARD PROCEDURES FOR ASPHALTIC SHINGLE INSTALLATION 1. Scope 4. Underlayment 2. 1.1 This roofing application standard has been developed to provide a responsive
More informationShapes Siding. Perfection Shingles. Chalk Line
Snap a Chalk Line Shapes Siding Perfection Shingles Chalk Line To establish a straight reference line to guide the positioning of the starter strip and the first course of siding, snap a chalk line. starter
More informationCONTENTS. Transitions Board and Batten Vertical Installation... 10,11
INSTALLATION MANUAL CONTENTS Important Notes... 2-4 Weather Protective Barriers... 2 Storage and Transportation... 2 Tools and Equipment... 2 Fastener Choices... 3 Wall Preparation... 3,4 Flashing... 4
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationROOFING APPLICATION STANDARD (RAS) No. 130 INSTALLATION CRITERIA FOR WOOD SHINGLES AND SHAKES APPLICATION
ROOFING APPLICATION STANDARD (RAS) No. 130 INSTALLATION CRITERIA FOR WOOD SHINGLES AND SHAKES APPLICATION 1. 2. 3. Scope 1.1 This application standard provides the minimum installation criteria for wood
More informationDIVISION 11 EQUIPMENT SECTION PHOTO DARKROOM FUME EXHAUST VENT-HOODS
DIVISION 11 EQUIPMENT SECTION PHOTO DARKROOM FUME EXHAUST VENT-HOODS PART 1 GENERAL 1.01 Scope of Work A. Provide material, accessories, tools, equipment and labor as required for the complete fabrication
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationSECTION WOOD SHINGLES
SECTION 07 31 29.13 WOOD SHINGLES SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. This guide specification does not include requirements
More informationInstallation Instructions for Standard Lap and Self-Aligning Lap Siding
Installation Instructions for Standard Lap and Self-Aligning Lap Siding 7/16 in. Standard Laps Include: All Old Mill Widths, Cedar Shake Lap and Smooth Lap 1/2 in. Self-Aligning Include: 8 in. and 12 in.
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationA. Columns: Worthington Millwork; Cellular Polyvinyl Chloride (PVC) columns; decorative, weatherproof, insect-proof, and highly durable.
WorthingtonWrap PVC Columns Architectural Specifications 1.1 SECTION INCLUDES A. Columns: Worthington Millwork; Cellular Polyvinyl Chloride (PVC) columns; decorative, weatherproof, insect-proof, and highly
More informationROOFING APPLICATION STANDARD (RAS) No. 130
ROOFING APPLICATION STANDARD (RAS) No. 130 1. Scope 1.1 This application Standard provides the minimum installation criteria for wood shingles and shakes. 2. Definitions 2.1 For definitions of terms used
More informationSeries 6000 Vinyl Horizontal Slider
Series 6000 Horizontal Slider Series 6000 Vinyl Horizontal Slider Contents List of Architectural Drawings...6000HS - 3 Elevations - XO or OX...6000HS - 4 Available Sizes - XO or OX...6000HS - 5 Elevations
More informationInspire Aledora Slate Application Guidelines
July 2014 Inspire Aledora Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationC e r t a i n Te e d S i d i n g
CertainTeed Siding Front Cover Siding: MainStreet Double 4" in cypress Accents: Cedar Impressions Half-Round Shingles in ivy green, natural clay & colonial white Trim: 3-1/2" Lineals in colonial white
More informationFlashing Materials. Rough Opening Preparation
Installation Instructions for CertainTeed New Construction Windows Handling vinyl windows CAUTION: Always store vinyl windows and doors in an upright position on a slight angle. Never lay them flat or
More informationInstallation Manual SOLID CORE SIDING
Installation Manual SOLID CORE SIDING SOLID CORE SIDING Installation Information contained in this manual can be viewed in video form at: www.youtube.com/epbc CONTENTS Important Notes...2-4 Weather Protective
More informationTurada Hardwood Shingles and Shakes Installation instructions
1. General 1.1 Maximum Exposure: Maximum exposure for wood shingles and shakes shall comply with Table 1 herein, unless specifically specified in the roof assemblies Product Approval. 1.2 Solid and Spaced
More informationCertainTeed Siding
CertainTeed Siding 1665 2015 ARCHITECTURAL ACCURACY AND BEAUTY, PERFORMANCE AND DURABILITY Restoration Classic provides the premium features that make it a great choice for both remodeling and new construction.
More informationWindow Frame Installation Instructions For Nail-on and Block Frames
General The key to any window or door installation is preparation. This extends from storage of the product to the final installation and to all points in between. Careful planning and attention to detail
More informationSeries 6000 Vinyl Single Hung
Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series
More informationFEATURE-RICH SIDING WITH FLEXIBILITY TO MEET ANY BUDGET
Siding MainStreet siding offers consistent quality, good looks and is the ideal choice for homeowners looking for value with the benefits of a premium panel. FEATURE-RICH SIDING WITH FLEXIBILITY TO MEET
More informationeco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
More informationROOFING City of Grand Rapids Building Safety Division
ROOFING City of Grand Rapids Building Safety Division 218-326-7601 www.cityofgrandrapidsmn.com This handout is intended only as a guide and is based in part on the 2015 Minnesota State Building Code, Grand
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationPROJECT INSTRUCTIONS Roofing
PROJECT INSTRUCTIONS Roofing This handout outlines some basic regulations contained within the 2015 Minnesota State Building Code, as well as other good building practices. However, this handout is not
More informationAluminum Siding System
Aluminum Siding System Do It Yourself Installation Guide For New Construction and Remodeling The Sell-Even Aluminum Siding System is manufactured to professional tolerences, yet it s designed to be fast
More informationA. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationStandard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit 1
Designation: D 4756 03 An American National Standard Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit 1 This standard is issued under the fixed designation D 4756;
More informationCFDTT-01. Control Joint Study (General)
Trim Method Classic Method Notes: Control joints are required and should be located by the designer at the following locations on the construction documents: 144 sf (13.4 sm) is the maximum overall area
More informationShown Here Carolina Beaded in colonial white.
C e r t a i n Te e d S i d i n g Front Cover Siding: Carolina Beaded in heritage cream. Trim: 3-1/2" Lineals and Crown Molding in colonial white and 4-Piece Corner System in colonial white with natural
More informationEagle clad double-hung window installation instructions
Eagle clad double-hung window installation instructions These instructions are for typical installation in new typical wood frame wall construction. These instructions and methods are not intended for
More informationA. Provide all finish carpentry needed for a complete and proper installation.
SECTION 06200 - PART ONE GENERAL 1.1 SECTION INCLUDES A. Provide all finish carpentry needed for a complete and proper installation. B. Provide all wood, nails, bolts, screws, and all other items needed
More informationInspire Slate Starter Piece Hip and Ridge. 13 1/2" Height: 13 ½" Width: 12" Squares/ Pallet. Bundles/ Square
December 2017 Classic Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationRESIDENTIAL ROOFS ADDENDUM NUMBER ONE. August 28, 2017
RESIDENTIAL ADDENDUM NUMBER ONE August 28, 2017 The following additions to, deletions from, and clarifications of the Contract Documents govern insofar as they apply and shall take precedence over those
More informationSECTION ROOF ACCESSORIES. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 07720 ROOF ACCESSORIES PART 1 GENERAL 1.1 SECTION INCLUDES Display hidden notes to specifier. (Don't know how? Click Here) A. Attachment clamp system for standing seam metal roofs. B. Attachment
More informationSeries 9000 Vinyl Horizontal Slider
Series 9000 Horizontal Slider Series 9000 Vinyl Horizontal Slider Contents List of Architectural Drawings...9000HS - 3 Elevations - XO or OX...9000HS - 4 Available Sizes - XO or OX...9000HS - 5 Elevations
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationProduct Guide Specification
JELD-WEN, inc. November 2014 825 Shiner Road, PO Box 311 Towanda, Pennsylvania 18848 Toll Free 800-255-0785 Website www.miratectrim.com E-mail miratec@jeld-wen.com Product Guide Specification Specifier
More informationSECTION HOLLOW METAL DOORS AND FRAMES
SECTION 081113 HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: Include construction details, material
More informationCertainTeed. Extra Long, Extra Thick Siding
CertainTeed Extra Long, Extra Thick Siding Compare the beauty of the home on the cover with this before photograph of the same house. With our extra long siding, these seams are eliminated. Front Cover
More informationInstallation Guidelines
Installation Guidelines Tando Building Products provides these instructions as general guidelines only. Tando Building Products neither installs exterior cladding nor has any control over any installation.
More informationInstallation Instructions for Old Mill Shingle and Designer Shake Lap Siding
Installation Instructions for Old Mill Shingle and Designer Shake Lap Siding Includes: Cove, Craftsmen Staggered, Diamond, Fish Scale, Octagon, Round and Old Mill Shingle Lap Important: Read and understand
More informationENDUREED VIVA SERIES Specifications
ENDUREED VIVA SERIES Specifications SECTION 07312 HDPE THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Viva Series synthetic thatch shingles.
More informationInstallation Instructions for Panel Siding and Soffit
Installation Instructions for Panel Siding and Soffit 7/16 in. Panels Include: Sturdy Panel, Square Edge, 3/4 in. Channel and Reverse Board and Batten (RB&B) 1/2 in. Panels Include: Adobe Shiplap and 808
More informationPRIMED STRAND REVERSIBLE SHAKE
PRIMED STRAND REVERSIBLE SHAKE PRIOR TO INSTALLATION Inspect product for any issues before installing (breakage, surface defects, foreign objects). Do not install questionable product. Report any problems
More informationSTUDfinder Installation System. Versatile, Great Looks and Performance Over Time
STUDfinder Installation System Versatile, Great Looks and Performance Over Time A Heritage of Authenticity Wolverine, a quality brand of CertainTeed Corporation, has a long tradition of developing innovative
More informationSECTION ASPHALT SHINGLES
SECTION 07311 ASPHALT SHINGLES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Asphalt shingle roofing. 2. Flexible sheet membranes for eave protection, underlayment, and valley protection. 3. Associated
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.
More informationRED DIAMOND SHINGLES Roof Installation Introduction:
RED DIAMOND SHINGLES Roof Installation Introduction: The guidelines set forth in this manual are intended for use with the application of Red Diamond shingles. Wallaba specie (Eperua Falcata) shingles
More informationCertainTeed S i d i n g
CertainTeed Siding 1665 2015 MainStreet siding offers consistent quality, good looks and is the ideal choice for homeowners looking for value with the benefits of a premium panel. FEATURE-RICH SIDING WITH
More informationCertainTeed S i d i n g
CertainTeed Siding Front Cover Siding: MainStreet Double 4" Clapboard in hearthstone Trim: Vinyl Carpentry and Restoration Millwork Shown Here (from left to right) MainStreet Double 4" in desert tan MainStreet
More informationVinyl Windows Manufactured by VPI Quality Windows
Vinyl Windows Manufactured by VPI Quality Windows Part Number: 531&591 Installation 531 & 591 SERIES SLIDING AND HUNG WINDOW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction.
More informationC e r t a i nte e d S i d i n g
CertainTeed Siding Front Cover Siding: MainStreet Double 4" Clapboard in hearthstone Trim: Vinyl Carpentry and Restoration Millwork Shown Here (from left to right) MainStreet Double 4" in desert tan MainStreet
More informationRead guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Installation Guide for E-Series/Eagle High-Performance Mullion Windows with LVL Reinforcement and Installed Using Type B Clips Thank you for choosing Andersen. Instructions are for typical, new wood-framed
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationInstallation Guide for E-Series/Eagle Clad Mechanically Fastened Windows
Guide for E-Series/Eagle Clad Mechanically Fastened Windows Thank you for choosing Andersen. Instructions are for typical, new wood-framed wall construction with weather protection in place. Instructions
More informationA. Boards or Strips: Lumber of less than 2 inches nominal size in least dimension.
HIGGINSVILLE HABILITATION CENTER MISC. BUILDING RENOVATIONS STATE OF MISSOURI HIGGINSVILLE, MISSOURI SECTION 061000 - ROUGH CARPENTRY PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationTHERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE)
THERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE) fig.3 Casement, Awning, Fixed Casement, Direct-Set, Double-Hung, Single-Hung & Horizontal Slider Windows Materials
More informationE-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20'
E-Z BUILD SHED GUIDE 12' 12' 12' 16' 12' 20' BUILD You can construct your own E-Z frame shed with the help of this step by step guide. North American softwood dimensional lumber sizes: Nominal Actual in
More informationInstallation Instructions
Installation Instructions SLICKER CLASSIC RAINSCREEN Page List of Approved Compatible Products 2 Nail Selection Guide 3 General Installation 4 Insulation Board Installation 5 EIFS Installation 6 Top of
More informationapplication instructions
application instructions architectural collection cedar shake 76 series lap siding General At the time of manufacture, siding meets or exceeds the performance standards set forth in Composite Panel Association
More informationFINISHING TOUCHES. Vinyl Carpentry Restoration Millwork
FINISHING TOUCHES Vinyl Carpentry Details Create The Personality. New siding makes any house look better. But it s the unique details that truly reflect your personality. CertainTeed offers a complete
More informationC e r t a i nte e d S i d i n g
CertainTeed Siding MainStreet siding offers consistent quality, good looks and is the ideal choice for homeowners looking for value with the benefits of a premium panel. FEATURE RICH SIDING WITH FLEXIBILITY
More informationTools required by installer: Materials required by installer:
Installation Guidelines For Quaker Window Products Vinyl product line (Single Hung, Double Hung, Sliding Window, Fixed Window, Casement, Awning, and Hopper) Installer: Read these instructions completely
More informationEXHIBIT B TO AGREEMENT BETWEEN PENSACOLA HABITAT FOR HUMANITY AND SUBCONTRACTOR. Scope of Work. Vinyl Siding Labor Division 190. General Requirements
EXHIBIT B TO AGREEMENT BETWEEN PENSACOLA HABITAT FOR HUMANITY AND SUBCONTRACTOR Scope of Work Vinyl Siding Labor Division 190 General Requirements 1. All Work shall be performed in accordance with manufacturer
More information1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and Highlights
1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and s These 1 Exam Prep Tabs are based on the National Roofing Contractors Association (NRCA) manual listed below: Steep-Slope Roof Systems
More informationInstallation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit.
Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit. Installer: Read these instructions completely before starting any installation.
More informationCERACLAD.
CERACLAD 4. Horizontal Application (Wood Structure) Instructions and Details Siding Panel Installation Accessories Installation Overview Starter Bar Installation Install s Installation
More informationINSTALLATION, STORAGE AND WALL CONSTRUCTION DETAILS
www.capecodsiding.com INSTALLATION, STORAGE AND WALL CONSTRUCTION DETAILS IMPORTANT READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE INSTALLING YOUR WOOD SIDING. FAILURE TO STRICTLY FOLLOW THESE INSTALLATION,
More informationSIDING-MASTER VINYL SIDING ATTACHMENT & ALIGNMENT SYSTEM & OVERHANG ATTACHMENT & ALIGNMENT SYSTEM INSTALLATION INSTRUCTIONS
Patent Pending SIDING-MASTER & OVERHANG ATTACHMENT & ALIGNMENT SYSTEM INSTALLATION INSTRUCTIONS Overview... SIDING-MASTER Strip Diagram... How to cut strips for length... Accessory Diagrams... How to (and
More informationKuraStone TM Installation Guide
Installation Guide Read these installation guidelines completely and thoroughly before beginning installation. Construction Requirements KuraStone pieces can be installed on braced wood or steel stud (18
More informationREPORT HOLDER: ISAIAH INDUSTRIES, INC. EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1360 Reissued 08/2018 This report is subject to renewal 08/2019. DIVISION: 07 00
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1717 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationHatteras Shingles. CertainTeed Shingle Applicator s Manual. YOUR OBJECTIVE: To learn the correct procedures for installing Hatteras shingles
CertainTeed Applicator s Manual Hatteras s 14 YOUR OBJECTIVE: To learn the correct procedures for installing Hatteras shingles HATTERAS SHINGLES Hatteras shingles are a premium oversize (18" x 36") roofing
More informationSECTION INTERIOR FINISH CARPENTRY
SECTION 06 20 23 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the following items for field-applied paint finish: 1. Interior standing and running trim. 2. Interior plywood paneling. B. Related Sections
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationINSTALLATION INSTRUCTION FOR WOOD DOUBLE-HUNG AND CASEMENT WINDOWS USING WOOD BRICKMOULD OR FLAT CASING
2009 Pella Corporation Part Number: 80DZ0101 INSTALLATION INSTRUCTION FOR WOOD DOUBLE-HUNG AND CASEMENT WINDOWS USING WOOD BRICKMOULD OR FLAT CASING Brickmould/Flat Casing Aluminum Head Flashing Corner
More informationSERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance... 2 II. Tools / Materials, Sealant Requirements, & Anchor Instructions... 2 III. Structure Verification & Sub-Sillpan Installation... 3 1. Opening Verification...3
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationInstallation Manual 0318
Installation Manual 0318 DOUBLE 7 CEDAR SHINGLE INSTALLATION GUIDE General Information CAUTION: REMEMBER THAT POLYMER UNDERGOES EXPANSION / CONTRACTION DUE TO VARIATIONS IN TEMPERATURE. THE FOLLOWING INSTRUCTIONS
More informationFor maximum performance and appeal, the only choice is Charter Oak.
For maximum performance and appeal, the only choice is Charter Oak. Ultimate Siding Systems Independently tested for quality and safety. When you choose Charter Oak, you get more than Alside s assurance
More informationAll Window Installation Instruction
1 All Window Installation Instruction Hurd Window Installation Instructions for Nail Fin & Wood Brick Mould Units Nail Fin Windows See Pages 2-11 Wood Brick Mould Windows See Pages 2-6, 8 & 12BM - 14BM
More information