INSTALLATION INSTRUCTIONS
|
|
- Mariah Linette Cannon
- 5 years ago
- Views:
Transcription
1 INSTALLATION INSTRUCTIONS PP-FCTA Suspended Ceiling Adapter NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA USA USA and Canada Phone: Fax: Other Locations Phone: (001) Fax: (001) EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) Fax: +44 (0)
2 Contents PP-FCTA Weight Limit... 2 Warning Statements... 2 Installation Tools... 3 Parts List... 3 Features... 4 PP-FCTA Installation... 5 Camera Screw Installation (optional)... 6 Mounting the PP-FCTA... 7 Securing the Ceiling Plate... 8 Electrical Box Cut-out Removal... 8 Ceiling Attachment... 9 Securing the 1 ½ NPT Pipe to the PP-FCTA Securing the Camera (optional)...11 Technical Specifications...11 Disclaimer Weight Limit Maximum Projector Weight: 50 lbs. Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE PROJECTOR. IF NOT, THE CEILING STRUCTURE MUST BE REINFORCED. PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS. At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result from dropping or mishandling the projector. This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious personal injury. Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact. Contact Premier Mounts with any questions: (800) techsupport@mounts.com Page 2 Visit the Premier Mounts website at Installation Instructions
3 PP-FCTA Installation Tools The following tools may be required depending upon your particular installation. They are not included. Ladder Hand Held Drill Pencil Protective Eyewear Phillips Tip Screwdriver 1/8 Drill Bit 1/4 Concrete Drill Bit Hammer Hole Saw Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) PP-FCTA Mount Hardware Main Ceiling Plate (Qty 1) Lower Adapter Plate (Qty 1) Upper Adapter Plate (Qty 1) Escutcheon Ring (Qty 1) ¼ -20 x 2 ¾ Pan Phillip Head Screw (Qty 1) ¼ -20 Wing Nuts (Qty 5) ¼ x 3 Eye Lag Screws (Qty 4) M6 x 2.4 Concrete Anchors (Qty 4) ¼ -20 Turnbuckles (Qty 4) 14-Gauge x 25 Galvanized Wire (Qty 4 Strands) M5 x 16mm Combo Screws (Qty 5) Installation Instructions Visit the Premier Mounts website at Page 3
4 Features The suspended ceiling adapter makes it easy to install and fine-tune the position of your overhead projector and organize its electrical wiring above the ceiling. PP-FCTA Mounting Coupler Use a set screw to hold any 1 ½ NPT pipe to the mounting coupler Adjustability Up to 9 of lateral shift Camera Screw Hole Use a 1/4-20 screw to mount a camera alongside the projector Electrical Access Knockouts for electrical or signal junction boxes Page 4 Visit the Premier Mounts website at Installation Instructions
5 PP-FCTA PP-FCTA Installation Introduction Read these instructions before installing your Premier Mounts product. Make sure you have all the parts and tools you need to safely complete the installation. Some of the steps in this installation may require two people to prevent personal injury and/or damage to the projector. Read all the warnings in the manual and always use proper safety equipment. Ceiling Plate Assembly Place the lower adapter plate with the threaded studs facing up through the adjustable slide slots of the main ceiling plate. The threaded studs will align with the adjustable slide on the main ceiling plate. Once the two pieces are together, align the mounting holes on the upper adapter plate with the threaded studs of the lower adapter plate. Place the three units together and loosely attach four (4) ¼ -20 wing nuts onto the threaded studs (see inset below). Are you adding a camera to the ceiling adapter? If Yes, proceed to the Camera Screw Installation (optional) section on page 6. If No, proceed to the Mounting the PP-FCTA section on page 7. ¼ -20 Wing nuts Upper Adapter Plate Main Ceiling Plate Adjustable Slide Slots Threaded Studs Lower Adapter Plate Installation Instructions Visit the Premier Mounts website at Page 5
6 Camera Screw Installation (optional) Make sure the camera supports one (1) 1/4-20 screw. Determine which screw hole on the upper adapter plate you will use to attach the camera. Insert one (1) 1/4-20 x 2 3/4 pan Phillips head screw through one (1) wing nut and the desired screw hole. PP-FCTA The screw should go through both the upper and lower adapter plates. It will later be used to mount the camera (see page 11). Do not overtighten the mounting screw. Proceed to the Mounting the PP-FCTA section. 1/4-20 x 2 3/4 pan Phillips head screw Wing nut 1/4-20 optional holes 1/4-20 threaded insert on camera (see page 11) Page 6 Visit the Premier Mounts website at Installation Instructions
7 PP-FCTA Mounting the PP-FCTA Pre-set four (4) M5 x 16mm combo screws on the ceiling plate assembly (two on each end of the plate). The M5 x 16 mm screws may be attached on the inner or outer lip of the main ceiling plate. Determine the ceiling tile you will use to attach the ceiling adapter. Use a pencil to measure and mark 3 from each edge of the t-bar frames to the inside of the tile (see diagram). Determine the mounting hole position inside the marked square of the tile and mark it with a pencil. If you are attaching a camera, mark an additional hole for the 1/4-20 screw next to the mounting coupler. ± ± Remove any of the 24 x 24 or 24 x 48 tiles that are surrounding the marked tile. ² ² Cut the mounting hole (and camera screw hole). ³ ³ Place the ceiling plate on the t-bar rails so that the mounting coupler can slide to align with the ceiling mounting hole. Proceed to the Securing the Ceiling Plate section on page 8. 1/4-20 optional holes M5 x 16mm Screws Ceiling Plate Assembly Upper Adapter Plate 3 3 Mounting Hole 3 3 T-Bar Frame Ceiling Tile Installation Instructions Visit the Premier Mounts website at Page 7
8 Securing the Ceiling Plate Once the ceiling plate assembly is resting on the t-bar frame rails, use a screwdriver to tighten the four (4) M5 x 16mm combo screws. Slide and center the upper plate assembly over the hole that was cut in the tile. Tighten all four (4) wing nuts. Do not overtighten the mounting screws. Upper Plate Assembly Upper Adapter Plate PP-FCTA Proceed to the Electrical Box Cut-out Removal section below. T-Bar Frame Rails M5 x 16mm Combo Screw Tiles Electrical Box Cut-out Removal Electrical installation should be completed by a certified electrician. Cut the tile where the electrical box is going to be secured. on electrical installation environment, install the electrical box and secure it to the ceiling plate assembly. Make all electrical connections at this time. Using (commercially available) hardware depending Proceed to the Attaching the Turnbuckles section. Electrical Box Cut-out Electrical Box (Commercially Available) Page 8 Visit the Premier Mounts website at Installation Instructions
9 PP-FCTA Ceiling Attachment Hook the four (4) turnbuckles into the four corners of the main ceiling plate. Then choose one of the three ceiling attachment Wood Stud Ceiling Determine a suitable structure capable of supporting the intended weight to drill the mounting holes. Set the holes so that wires from the main ceiling plate will angle 15 degrees outward (see Fig. 1). Use a 1/8 drill bit to drill the mounting holes. Secure the four (4) ¼ eye lag screws to the wood stud in the ceiling. Loop a wire through an eye lag screw (see Figure 2). ± ± Twist the wire at least five (5) times around itself to secure it. ² ² Run the other end of the wire through the turnbuckle. ³ ³ Twist the wire at least five (5) times around itself to secure it. Repeat steps 4-7 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Wood Stud Figure 1 15 Eye Lag Screw Proceed to the Securing the 1 ½ NPT to the PP-FCTA on page 11. Concrete Ceiling Determine a suitable structure capable of supporting the intended weight to drill the mounting holes. Set the holes so that wires from the main ceiling plate will angle 15 degrees outward (see Fig. 1). Use a ¼ concrete drill bit to drill the mounting holes. Place the concrete anchors into the drilled hole and gently tap into place using a rubber mallet or hammer. Loop a wire through a concrete anchor bolt (see Figure 2). ± ± Twist the wire at least five (5) times around itself to secure it. ² ² Run the other end of the wire through the turnbuckle. ³ ³ Twist the wire at least five (5) times around itself to secure it. Repeat steps 4-7 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Solid Surface Figure 2 15 Figure 1 Concrete Anchor Proceed to the Securing the 1 ½ NPT to the PP-FCTA on page 11. Figure 2 Installation Instructions Visit the Premier Mounts website at Page 9
10 Ceiling Attachment (cont d) PP-FCTA Truss Ceiling Loop the wire around the truss (see Figure 1). Hang the wires from the trusses so that they will angle 15 degrees outward from the main ceiling plate (see Fig. 2). Twist the wire at least five (5) times around itself to secure it. Twist the wire at least five (5) times around itself to Run the other end of the wire through the turnbuckle. secure it. ± ± Repeat steps 1-4 for the remaining three mounting points. The final loop on the wire has to be tightly bent and secured to prevent it from untwisting. Twist the turnbuckles to fine-tune adjust. Recheck all hardware and installation for proper tightness and security. Ceiling Truss Figure 1 15 Proceed to the Securing the 1 ½ NPT Pipe to the PP-FCTA section below. Figure 2 Securing the 1 ½ NPT Pipe to the PP-FCTA Secure the 1 ½ NPT pipe to the mounting coupler and tighten the pipe. Secure the pipe using one (1) M5 x 16mm combo screw to the plate. The M5 x 16mm combo screw must be used to stabilize the 1 ½ NPT pipe. Attach the escutcheon ring to the 1 ½ NPT pipe beneath the ceiling tile. Are you adding a camera to the ceiling adapter? If Yes, proceed to the Securing the Camera (optional) section on page 11. If No, you have completed the ceiling adapter installation. 1-½ Pipe M5 x 16mm Screw Page 10 Visit the Premier Mounts website at Installation Instructions
11 PP-FCTA Securing the Camera (optional) Attach the camera to the bottom of the 1/4-20 pan Phillips head screw. The screw should be extending down through the ceiling tile next to the mounting hole. Use the screw s wing nut to tighten the camera against the tile. Technical Specifications All measurements are in inches (1.00) Installation Instructions Visit the Premier Mounts website at Page 11
12 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY PP-FCTA What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser s name, address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at (800) Warranty claims will not be accepted over the phone or by fax. Premier Mounts Attn: Warranty Claim 3130 East Miraloma Ave. Anaheim, CA How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Disclaimer Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Premier Mounts makes no representation of warranty, expressed or implied, regarding the information contained herein. Premier Mounts assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. Premier Mounts 2010 Page 12 Visit the Premier Mounts website at Installation Instructions
13 INSTALLATION INSTRUCTIONS PBC- UMW (White) PBC-UMS (Black) PBC UNIVERSAL PROJECTOR MOUNT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA USA USA and Canada Phone: Fax: EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) Fax: +44 (0) Other Locations Phone: (001) ; Fax: (001) Premier Mounts A
14 Table of Contents Warning Statements Parts List Installation Tools Features Projector Preparation Bracket Installation Leveling the Mounting Bracket Securing the Upper Assembly Ceiling Plate Securing the Projector to the Upper Assembly Final Adjustments Plastic Cap Installation Technical Specifications Warranty Warning Statements THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING 40 LBS. IF NOT, THE CEILING MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. Indicates that the power plug is to be disconnected Contact Premier Mounts with any questions. from the power outlet. Safety precautions must be taken at all times. Warning and Caution statements. A secure structure must support the weight, or load, of the projector. When mounting to a ceiling that contains wooden studs, dead center of the wooden stud must be confirmed prior to installation. Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the projector and/or damage to the mounting surface. Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the projector and could increase the risk of fire. At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the projector. Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware (which is commercially available). Installation Manual Page 2
15 Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) Upper Assembly (Qty 1) Universal Mounting Bracket (Qty 1) #14 x 2 Wood Screws (Qty 3) M2.5 x 10mm Security head screws (Qty 4) M6 x 25 Security head screw (Qty 1) M3 x 12mm Security head screws (Qty 4) M4 x 12 Security head screws (Qty 4) M5 x 12 Security head screws (Qty 4) M6 x 12 Security head screws (Qty 4) Plastic barrel caps (Qty 4) Installation Tools Phillips Head Screw Driver Portable Drill Soft Material/ Blanket Pencil 1/8 Drill Bit Green Level (Supplied) Tape Measure Stud Finder (Commercially Available) Ladder M5 Security Allen Wrench (Supplied) M3 Security Allen Wrench (Supplied) Page 3 Installation Manual
16 A B C D E F G H I J K L M Single Wooden Stud Mounts Solid Structure Mounting Points M3 Security Allen Wrench Security Allen Wrench 1.5 nipple (NTP) Tension Knobs Safety Knob Security Screws Leveling Screws Universal Mounting bracket Leg Assembly Projector (not included) Tri-Lock Opening Option 1 H B C D F A C E G K NOTE: The four (two-piece) leg assemblies can be used as single leg or any combination of single and dual legs together as shown in Options 1 and 2. The number of legs may vary depending on the number of mounting points found on the bottom of the projector. I M J L D Combination Leg Option 2 M H Single Leg J L Installation Manual Page 4
17 Features Congratulations on your recent purchase of your PBC Universal Projector Mount. This mounting system is designed for projectors weighing 40lbs. (18.14 kg) or less. The mount is easy to install and is loaded with additional installation features built into the mount. These features allow you to optimize the projector s position to the screen for the best projector performance and picture quality. Can be mounted to the ceiling Tilt/Roll up to ±20 Rotates 360 Positive locking in any set position Quick release system for easy projector mounting and removal Cables can be routed inside pipe Upper ceiling plate allows for single wooden stud installation and cable insertion through the ceiling plate for a cleaner appearance Page 5 Installation Manual
18 Projector Preparation Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could result in serious personal injury and possible damage to the projector. THE PROJECTOR IS FRAGILE. HANDLE WITH CARE AT ALL TIMES. Review the projectors manufacture s operation manual and refer to the ceiling mounting section of the operator s manual. Here you will normally find important reference information regarding installation dimensions such as (distance from the screen to the lens of the projector, top of the lens placement to the top screen etc. Adherence to these recommendations during your installation will enhance the quality of your final image on the screen. Step 1. Carefully invert the projector and place it on a smooth, flat surface. Step 2. Identify the number of mounting points and screw thread size. Most projectors have either three of four mounting points and are M4, M5 or M6 in thread size (Figure 1). Mounting Points Inverted Projector Blanket/ Soft Cloth Flat Surface Figure 1. Projector Preparation Step 3. Separate the upper assembly from the projector mounting bracket by slightly loosening the two tension knurl knobs to create free play between the bracket tri-lock assembly and the upper section tri-lock assembly points (Figure 2A and Figure 2B). Step 4. Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180 apart and separate (Figure 2C). Installation Manual Page 6
19 A B Upper Assembly Tension Knobs Safety Knob Rotate 180 To unlock C Tri-Lock Opening Figure 2. Mount Preparation Page 7 Installation Manual
20 Bracket Installation Only attach to the projector manufacturer s specified mounting points on the projector chassis with a minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer as well as the safety instructions outlined in this manual. The two-piece mounting legs are designed to allow for the positioning of each leg around projector air vents located on the base of the projector. Where applicable, each leg mount may be shortened by removing the locking screw. This will allow for a better bracket fit, overall. For easier installation, the mounting legs should be first mounted to the projector. Each leg should then be adjusted so that they can mount to the Universal Mount (Figure 3). Step 1. Locate the mounting points on the bottom of the projector and use the appropriate number of mounting legs. Step 2. Select the mounting hardware that the projector requires and loosely install the universal mount on the projector. Installation Manual Page 8
21 Leveling the Mounting Bracket Secure but do not over tighten the mounting hardware. Failure to do so will result in damaging the threads in the projector. Step 1. Rotate the leveling barrels to level the mounting bracket. Step 2. Position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp and filter access doors). Step 3. When the desired position is achieved, tighten the mounting screws to the projector and then tighten the security hex head leg screws with the M5 Security Allen Wrench (Figure 4). M5 Security Allen Wrench Level Inverted Projector DOWN Leveling Barrels UP Adjusting the Mount Figure 4. Leveling the Mounting Bracket Page Installation Manual
22 Securing the Upper Assembly Ceiling Plate Review your projector s owner s manual to determine what distance is recommended from the front of the lens to the edge of the screen for best picture ratio. However in most home theater and office ceiling mount installations this is not practical as the projector would be to low within the room. At a minimum you should at least locate the inverted projectors top of the lens point to a point centered horizontally on the screen and no higher then the top image edge of the screen). Most projector manufacturers prefer to have the center of the projector lens centered of the top of the screen when the projector is inverted for ceiling mounting. It is normally better to have the top edge of the lens as close to parallel with the top image edge of the screen as well. Before you mount your screen and projector, make sure the mounting location will safely support the weight of the projector. Make sure to measure from the center of the mounting bracket to the front edge of the lens to determine the proper placement of the center of the upper assembly. Step 1. Secure the ceiling assembly into a solid wood ceiling stud with the two (2) #14 x 2 wood screws (supplied) or with other (commercially available) hardware depending on your installation environment (Figure 5). Ceiling Structure Wooden Ceiling Stud #14 x 2 Wood Screws Secure the ceiling mount to the center of the wooden stud. Upper Assembly Figure 5. Securing the Upper Assembly Ceiling Plate Installation Manual Page
23 Securing the Projector to the Upper Assembly Step 1. Make sure the three-knurl knobs are loosened to fully expose to the tri-lock mounting plate in the base of the upper assembly. Step 2. Carefully lift the projector and insert the mounting bracket mating special tri-lock cutout into the mating portion of the upper assembly. Step 3. Once inserted rotate the projector and mounting bracket 180 and secure the rear safety knob first to prevent further rotation of the bracket in the upper assembly. Step 4. Tighten the remaining two tension knurl knobs until the mount becomes rigid. The safety knob should line up with the alignment slot on the mounting bracket. Follow the numbering sequence prior to securing the projector to the upper assembly. 3 The alignment slot must be in direct alignment with the safety knob to lock the mounting bracket to the upper assembly. Insert universal bracket to the tri-lock, then rotate the projector To secure the mount, replace the red safety knurl knob with one (1) M6 x 25 security screw (supplied). Tension Knurl Knobs Universal Mount 1 Tri-Lock Openin g Alignment Slot Projector Figure 6. Low Profile Installation Page Installation Manual
24 Final Adjustments Step 1. With the projector secured in the mount and power on and signal supplied to the projector you can now proceed with the final height, tilt, roll and yaw to optimize the projected image. A The height can be adjusted by rotating the PBC clockwise (higher) / counterclockwise (lower). Once the height is achieved, tighten the locking set screw using the supplied Security Allen Wrench. B To adjust the tilt angle of the projector, slightly loosen the side M8 screws and tilt to the desired angle and firmly tighten the two M8 adjustment screws. C If roll adjustment is needed to square the images on the screen, slightly loosen the front and rear M8 screws and adjust to the desired angle. Then firmly tighten the two M8 adjustment screws. A Wooden Stud Ceiling Structure Locking Set Screw B Wooden Stud Ceiling Structure C (Roll) Adjusting Screws Re-check the hardware for tightness and security. Figure 7. Final Adjustments Installation Manual Page
25 Plastic Cap Installation Step 1. Once all the final adjustments have been finished, install the plastic caps on the leveling barrels (Figure 8). Figure 8. Plastic Cap Installation Page Installation Manual
26 Technical Specifications All measurements are in inches (mm) Security 1.5 (NPT) Nipple Figure 9. Technical Dimensions Installation Manual Page
27 Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PR E MIE R MOUNTS DISCL AIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPT E R S, DISPL AY S, PR OJE CTOR S, OTHER PROPERTY, OR PERSONAL INJURY RESUL T ING, IN WHOL E OR IN PART, FR OM IMPR OPE R INSTAL LATION, MODIFICATION, USE OR MISUSE OF IT S PR ODUCTS. PR E MIE R MOUNTS DISCL AIMS ALL OTHER WAR R ANTIE S, E XPR E SS OR IMPLIED, INCL UDING WAR R ANT IE S OF MERCHANTABILITY AND FIT NE SS FOR A PAR TICULAR PUR POSE. PR E MIE R MOUNTS IS NOT R ESPONSIBL E FOR INCIDE NT AL OR CONSE QUE NT IAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR L ABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PR ODUCT S OR PARTS. SOME STATES DO NOT AL L OW THE EXCLUSION OR L IMITATION OF INCIDE NT AL OR CONSE QUE NTIAL DAMAGE S, SO THE ABOVE LIMITATION OR EXCL USION MAY NOT APPL Y TO YOU. What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser s name, address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at Warranty claims will not be accepted over the phone or by fax. Premier Mounts Attn: Warranty Claim 3130 E. Miraloma Avenue Anaheim, CA How State Law Applies T HIS WAR R ANTY GIVE S YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY AL SO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Page Installation Manual
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PBC- UMW (White) PBC-UMS (Black) PBC UNIVERSAL PROJECTOR MOUNT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888
More informationINSTALLATION MANUAL PBC-UMS
INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation
More informationINSTALLATION MANUAL PBL-UMP
INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PP-FCTA Suspended Ceiling Adapter NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone:
More informationINSTALLATION MANUAL ELPMBUNI
INSTALLATION MANUAL ELPMBUNI Warning Statements WARNING: WARNING: WARNING: WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN
More informationNOVA-EXT Versatile Projector Mount Model: NOVA-EXT
INSTALLATION MANUAL NOVA-EXT Versatile Projector Mount Model: NOVA-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PP-FCTA Suspended Ceiling Adapter NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone:
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS CTM-MS1 Flat Panel Display Mount (26 to 37 ) NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FLIP Flip-Down LCD Mount NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial
More informationGB-AVSTOR5 Ceiling Equipment Storage Box with Pipe Coupler
Ceiling Equipment Storage Box with Pipe Coupler INSTALLATION INSTRUCTIONS CREATING POSITIVE CUSTOMER EXPERIENCES 9534-500-021-00 Contents Weight Limit... 2 Warning Statements... 2 Installation Tools...
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS PDS-PLUS Universal Projector Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationAST-2446 INSTALLATION INSTRUCTIONS
AST-2446 Suspension Adapter AST-2446 INSTALLATION INSTRUCTIONS Single Stud Installation Step 1. Secure the ceiling plate to the ceiling structure (see WARNING). Step 2. Use suitable hardware (commercially
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Short Throw Projector Arm Model: UNI-STA/UNI-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationInstallation Instructions PP-FCMA
Installation Instructions PP-FCMA Step 1 Carefully remove a 24 (610mm)x48 (1120mm) or two 24 (610mm)x24 (610mm) suspended ceiling tiles. Step 2 Install the four (4) each ¼ x3 eye bolts securely into the
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AM2 / AM2-B Articulating Swingout Arm NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm Model: AM300/AM300-B NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations
More informationP4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels
Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE
More informationPBM-UNI Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.
More informationINSTALLATION MANUAL CTM-VESA
INSTALLATION MANUAL CTM-VESA Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com IN-CTMVESA.R1 PBL-110 Projector Mount Page
More informationInstallation Instructions
Tilt/Pivot Mount Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 techsupport@mounts.com www.mounts.com IN-PTMB.R0 TABLE OF CONTENTS Warning Statements
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Polaris Universal Projector Mount Model: NORTH AMERICA 1321 S. State College Blvd. Fullerton, CA 92831 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations
More informationPRC-LA Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: Warning Statements 50 lbs. THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR TIMES THE WEIGHT OF
More informationInstallation Instructions
Installation Instructions AM2 Articulating Swingout Arm Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 techsupport@mounts.com www.mounts.com IN-AM2.R1
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Short Throw Projector Wall Mount Model: UNI/UNIE NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Ultra Short-Throw Projector Wall Mount Model: UNIU NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888 Other
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Compact Power Amplifier NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).714.632.7100
More informationAM500-U Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Wall Mount Bracket (Qty 2) Cross Bar 5/16 Flat Washers (Qty 6) Universal Spacers
More informationInstallation Guide. Model VLS-TM1540. Universal Tilt/Pivot Wall Mount for use with Flat Panel Displays
Installation Guide www.revenaproducts.com 4915 SW Griffith Drive Suite 302 Beaverton, OR 97005 Model VLS-TM1540 Universal Tilt/Pivot Wall Mount for use with 15-40 Flat Panel Displays Installation Guide
More informationINSTALLATION MANUAL SP-CEIL-012
INSTALLATION MANUAL SP-CEIL-012 InFocus Corporation 27700B S.W. Parkway Ave. Wilsonville, OR 97070-9215 1-800-294-6400 www.infocus.com IN-SPECEIL012.R2 PBL-110 Projector Mount Page - 2 - Installation Manual
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
More informationPAM-200 Universal Projector Mount
INSTALLATION MANUAL PAM-200 Universal Projector Mount Sony Electronics 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-PAM200.R0 Table of Contents Parts List...- 3 - Installation Tools...-
More informationAM95 Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components: Maximum Flat Panel Weight: 95 lb. / 43.1 kg. M4 X 25mm M5 X 25mm M6 X 12mm (Qty 2) M6 X 25mm M8 X 25mm Allen Key Plastic Cover
More informationECM Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Elliptical Ceiling Mount for 37 to 63 Flat Panels Model: ECM-3000 Warranty, Garantie, Garantía, Garanzia, Garantie, Waarborg: http://www.mounts.com/warranty 9531-000-001-0X Rev.0 www.mounts.com North America
More informationPWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT
UNIVERSAL FLAT PANEL MOUNT IN-PWMT210.R0 TABLE OF CONTENTS Warning Statements 3 Parts List 4 Installation Tools 4 Locating the Center of the 5 Mounting Bracket Positioning 5 Securing the Mounting Brackets
More informationUniversal flat-panel mount
R I N S T A L L A T I O N M A N U A L Universal flat-panel mount LISTED E176225 3130 E. Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 www.mounts.com PREMIER MOUNTS 2004/ REV 00
More informationUniversal flat-panel mount
I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate
More informationINSTALLATION MANUAL SFM2
INSTALLATION MANUAL SFM2 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM2.R1 Table of Contents WARNING STATEMENTS... - 3 - PARTS LIST... - 4 - INSTALLATION TOOLS...
More informationLCD DISPLAY MOUNT
I N S T A L L A T I O N M A N U A L 38-804769-01 LCD DISPLAY MOUNT WWW.CHRISTIEDIGITAL.COM Contents - Assembly drawing - Securing the bottom wall plate - Fine tune adjustments - Marking the top plate mounting
More informationINSTALLATION MANUAL SFM3
INSTALLATION MANUAL SFM3 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM3.R0 Table of Contents WARNING STATEMENTS...- 3 - PARTS LIST...- 4 - INSTALLATION TOOLS...-
More informationDual Arm Tilt LCD Mount
Installation Manual model # 51324 M o u n t i n g S y s t e m s Dual Arm Tilt LCD Mount Fits Displays 13 to 32 Supports Up to 50 lbs (23 kgs) Projection from Wall from 3 to 17 Meets VESA Standards 50/75/100,
More informationPlanar FWMG-MXL INSTALLATION INSTRUCTIONS
Planar FWMG-MXL INSTALLATION INSTRUCTIONS Fixed Wall Mount for Ultra Large Displays 50-98 weighing less than 300 lbs. Part Number: 955-0217-00 Planar, A Leyard 1195 NW Compton Drive Beaverton, OR 97006
More informationPFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS
Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation
More informationModular Video Wall System with Push-to-Pop-out and Anti-Theft Features VW401P. User s Manual
Modular Video Wall System with Push-to-Pop-out and Anti-Theft Features Contents Weight Limit.... 2 Warning Statements.... 2 Installation Tools.... 3 Parts List... 4 Features.... 5 Installing the Mount....
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationPTDM2. Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
1321 S. State College Blvd., Fullerton, CA 92831 USA N O PTDM2 Included components Maximum Flat Panel Weight: 100 lb. / 45.35 kg. M4 x 12mm screw M4 x 16mm screw M4 x 25mm screw M6 x 12mm screw M6 x 16mm
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationFull Motion Gas Spring TV Wall Mount - 24" to 55" Installation Instructions
Full Motion Gas Spring TV Wall Mount - 24" to 55" Installation Instructions 04-1102A Caution Prior to installation of this product, the installation instructions should be read and completely understood.
More informationAssembly Instructions for Model: VMPR1
Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationFull-Motion TV Mount - 47" to 90" Installation Guide
Full-Motion TV Mount - 47" to 90" Installation Guide Full-motion Articulating LCD/Plasma TV Wall-mount TV size: 47" - 90" Tilt angle: +/- 12 degrees Max load capacity: 200 lbs / 90 kg Wall distance (at
More informationFull-Motion TV Mount 36" to 65" Installation Instructions
Full-Motion TV Mount 36" to 65" Installation Instructions Full-motion/articulating universal LCD/Plasma TV wall-mount TV size: 36" - 65" Tilt angle: 0-15 degrees Max load capacity: 132 lbs / 60 Kgs Wall
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More informationOB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
More informationMSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox
INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays
More informationINSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series
INSTALLATION INSTRUCTIONS Small Flat Panel Mounts Model: F-Series This Instruction Manual covers most of the F-Series wall and desk mounts, as well as selected F-Series pole mounts. NOTE: Some F-Series
More informationCMA-455 Suspended Ceiling-Tile Reinforcing Kit
INSTALLATION INSTRUCTIONS CMA-455 Suspended Ceiling-Tile Reinforcing Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products) when installing these products in a suspended
More informationTilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM
Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /
More informationFSM / FULL SWING WALL MOUNT. For Flat Panel Screens. User Manual
FSM- 3760 / FULL SWING WALL MOUNT For 37-60 Flat Panel Screens User Manual Thank you for choosing Gabor. Thank you for choosing Gabor s full swing flat panel screen wall mount. This heavy-duty wall mount
More informationUltra-Thin LED/LCD TV Mount - 23" to 42"
Ultra-Thin LED/LCD TV Mount - " to 4" Installation Instructions Ultra-Thin LED/LCD TV Wall Mount Material:.0mm Cold Rolled Steel Plate TV Size: " - 4 Max load capacity: 99lbs / 45kg Wall distance: 0.4"
More informationUniversal Projector Ceiling Mount Model: DPM-45
Universal Projector Ceiling Mount Model: DPM-45 Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented within this
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationFull Motion TV Mount - 23" to 42" Installation and Operating Instructions
Full Motion TV Mount - " to " Installation and Operating Instructions Full-motion/articulating universal LCD/Plasma TV wall-mount TV size: " - " Tilt angle: 0- degrees Max load capacity:00 lbs Wall distance:.75"
More informationOwner s Manual Mobile Flat-Panel Floor Stand
Owner s Manual Mobile Flat-Panel Floor Stand Model: DMCS3270XP Espanol 13 Francais 25 Русский 37 Deutsch 49 CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACIT. SERIOUS INJUR OR PROPERT DAMAGE MA OCCUR!
More informationInstall Instructions. NewAge Steel Welded Tall Locker
Kit Contains Full Width Adjustable Steel Shelves (4) Height-Adjustable Steel Leveling Legs (4) Aluminum Door Trim (2) 2.5 x ¼ Cabinet Mounting Lag Bolts (4) Large Zinc Plated Mounting Washers (4) 5/8 x
More informationIMPORTANT WARNINGS AND CAUTIONS!
I N S T R U C T I O N M A N U A L The Christie Vivid Green ceiling mount will suspend your Christie Vivid Green projector in an upright position to compliment conference rooms, classrooms or home theater
More informationLC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less
Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C2 02/2013
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationPowered by. For further installation assistance: prxperformance.com/pages/murphy-rack
Powered by The 90 Fold-in Murphy Rack is made by the creators of the original Profile Folding Rack at PRx Performance and is Patent Pending. An up-to-date record of patents and patent pending items can
More informationINSTRUCTION BOOK FOR. IDEA Screen & Panoramic for Nureva Span
INSTRUCTION BOOK FOR IDEA Screen & Panoramic for Nureva Span Disclaimer Milestone and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete.
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More informationSM-RAZOR-F-M/L/XL. Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL
SM-RAZOR-F-M/L/XL Strong Low Profile Fixed Mount for Ultra-Thin Flat-Panel TVs INSTALLATION MANUAL WARNINGS: Installation of this product should be done by a qualified professional. Do not begin installation
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com
More informationLC200WT Security Wall Mount with Tilt for up to 32" Flat Screens
Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front
More informationUSE AND CARE GUIDE FIXED LED / LCD TV WALL MOUNT (UNIVERSAL MOUNTING PATTERN, FITS VESA
Item #302-080 Model #50710 USE ND CRE GUIDE FIXED LED / LCD TV WLL MOUNT (UNIVERSL MOUNTING PTTERN, FITS VES 100/200/300/400/600) Questions, problems, missing parts? Before returning to the store, call
More informationInstallation & Assembly: Two Piece Suspended Ceiling Plate
Installation & ssembly: Two Piece Suspended Ceiling Plate Model: CMJ453 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS VSA Pole Mount NORTH AMRICA 1321 S. State College oulevard Fullerton, CA 92831 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other Locations Phone: (001).714.632.7100
More informationSawStop. T-GlideTM. Fence System- Professional Series II OWNER S MANUAL
SawStop T-GlideTM Fence System- Professional Series II OWNER S MANUAL Warranty SawStop warrants to the original retail purchaser of a new T-Glide Fence System - Professional Series II from an authorized
More informationFixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved
Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...
More informationProjector Ceiling Mount
INSTALLATION MANUAL Projector Ceiling Mount PID:3010 PID:5466 20kg (44lbs) RATED CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! ISSUED: FEB. 2013 NOTE: Read the
More informationSawStop. Contractor Fence Assembly OWNER S MANUAL. Model CNS-SFA
Contractor Fence Assembly OWNER S MANUAL Model CNS-SFA Warranty warrants to the original retail purchaser of the Contractor Fence Assembly accompanying this manual that the fence assembly will be free
More informationAssembly Instructions for Model: MF110
Assembly Instructions for Model: MF110 Thank you for choosing a Sanus Systems VisionMount wall mount. The MF110 is designed to mount LCD flat panels with VESA (Video Electronics Standards Association)
More informationVideo Wall Installation Instructions 2W X 3H, 3W X 3H
Video Wall Installation Instructions 2W X 3H, 3W X 3H www.microndisplaysolutions.com Table of Contents Important Safety Instructions... 3 Configuration... 4 Package Contents, included and optional items...
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationMounts by. Model PMU50 PROJECTOR MOUNT. Simple to adjust no-tools required
Mounts by A division of David Engineering & Mfg. Inc. Model PMU50 PROJECTOR MOUNT Thank you for purchasing the PDR Projector mount with the exclusive Bayonet locking system. To ensure the correct usage,
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationAssembly Instructions
Thank You For Purchasing The Best Overhead Storage Rack Assembly Instructions Overhead Storage Rack 8 x 4 8 x 3 8 x 2 6 x 4 6 x 3 6 x 2 4 x 4 Two 8 x4 Racks Pictured P.O. Box 714, El Cerrito, CA 94530
More informationWorktop INDEX eight Capacity Unpacking
Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Exterior Tilting Low-Profile Mount for Flat-Panels NORTH AMERICA 1321 S. State College Blvd. Fullerton, CA 92831 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888 Other
More informationPART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
More informationLC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns
Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationOne Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX101SS
One Shelf, Wall Mounted A/V Component Stand Installation Guide Model: EX0SS For technical assistance or troubleshooting please call -855-994-3832. This product is intended for use only with Audio/Video
More information