CORRIGENDUM ADDENDUM NO. 04 DATED TO TENDER NO. SDG5327P18/09 DATED
|
|
|
- Willis Casey
- 5 years ago
- Views:
Transcription
1 MATERIALS DEPARTMENT P.O. DULIAJAN DIST. DIBRUGARH ASSAM, INDIA PHONE: FAX: CORRIGENDUM ADDENDUM NO. 04 DATED TO TENDER NO. SDG5327P18/09 DATED This addendum is issued to revise the item specifications, clauses in Annexure-IA of NIT and Bid Closing/Bid Opening Date as mentioned here under: (A) Amendment in Item Specifications Item Existing, Material Description Amended Material Description No. 110 Bend Bevel Ended, Pre- coated by 90Deg, Fabricated from line pipe 200mm,NB (8" ) dia, ERW/LSAW/HSAW, Grade API 5L X-46,PSL -2,W/T 6.4mm as per following specification i) Pipe Outside diameter 219.1mm, 144kg/sq cm v) Deg of Bend : 90Deg Bend radius R=6D where R is the radius of the bend and D is the diameter. Bend Bevel Ended, Pre- coated by Radius 90Deg, Fabricated from line pipe 200mm,NB (8" ) dia, ERW/LSAW/HSAW, Grade API 5L X- 46,PSL -2,W/T 6.4mm as per API 5L latest edition having following specification i) Pipe Outside diameter 219.1mm, 144kg/sq cm v) Deg of Bend : 90Deg Bend radius R=6D where R is the radius of the bend and D is the diameter. 120 BEND,45 DEG,NB 200MM, Bevel Ended, Pre- coated by Heat Shrinkable sleeves, as per ISO :3016, Long Radius 45 Degree Fabricated from line pipe BEND,45 DEG,NB 200MM, Bevel Ended, Pre- coated by Polyethylene Heat Shrinkable sleeves, as per ISO latest edition, Long Radius 45 Degree Fabricated from line pipe 200mm (8") NB Page 1 of 6
2 200mm (8") NB diameter, ERW/LSAW/HSAW Grade API 5L X-46, PSL -2, W/T 6.4 mm as per following specification: i) Pipe Outside diameter 219.1mm, 144kg/sq cm v) Deg of Bend : 45Deg Bend radius R=6D where R is the radius of the bend and D is the diameter 130 Bend Bevel Ended, Pre- coated by 90Deg, Fabricated from line pipe 150mm (6" ) NB dia, ERW/LSAW/HSAW, Grade API 5L X-46,PSL -2, W/T 6.4mm as per following specification: i)pipe Outside diameter168.3mm, ii)thickness:6.4mm, iii) Weight per meter : kg/m, iv) Test mill Pressure (Hydraulic): 187kg/sq cm v) Deg of Bend : 90Deg, Bend radius R=6D where R is the radius of the bend and D is the diameter 140 Bend Bevel Ended, Pre- coated by 45Deg, Fabricated from line pipe 150mm (6" ) NB dia, ERW/LSAW/HSAW, Grade API 5L X-46,PSL -2, W/T 6.4mm as per following specification; i)pipe Outside diameter 168.3mm, iii) Weight per meter : kg/m, diameter, ERW/LSAW/HSAW Grade API 5L X-46, PSL -2, W/T 6.4 mm as per API 5L latest edition having following specification: i) Pipe Outside diameter 219.1mm, 144kg/sq cm v) Deg of Bend : 45Deg Bend radius R=6D where R is the radius of the bend and D is the diameter Bend Bevel Ended, Pre- coated by Radius 90Deg, Fabricated from line pipe 150mm (6" ) NB dia, ERW/LSAW/HSAW, Grade API 5L X-46,PSL -2, W/T 6.4mm as per following specification: i)pipe Outside diameter168.3mm, ii)thickness:6.4mm, iii) Weight per meter : kg/m, iv) Test mill Pressure (Hydraulic): 187kg/sq cm v) Deg of Bend : 90Deg, Bend radius R=6D where R is the radius of the bend and D is the diameter Bend Bevel Ended, Pre- coated by per ISO latest edition,long Radius 45Deg, Fabricated from line pipe 150mm (6" ) NB dia, ERW/LSAW/HSAW, Grade API 5L X-46,PSL -2, W/T 6.4mm as per following specification; i)pipe Outside diameter 168.3mm, iii) Weight per meter : kg/m, iv) Test mill Pressure (Hydraulic): 187kg/sq cm, Page 2 of 6
3 iv) Test mill Pressure (Hydraulic): 187kg/sq cm, v) Deg of Bend : 45Deg Bend radius R=6D where R is the radius of the bend and D is the diameter. 150 Bend,Bevel Ended, Pre- coated by Bend, 45 Deg. Fabricated from Line Pipe 10"(273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS-2, W/T = 7.1 mm as per API 5L latest edition; 1. Deg of Bend: 45 Deg 2., Bend radius 6D, 2. Pipe Out side diameter: mm, 3. Thickness : 7.1 mm, 4. Weight per meter : kg/m Test Pressure: 145 kg/cm Bend,Bevel Ended, Pre- coated by Bend, 60 Deg. Fabricated from Line Pipe 10" (273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS-2, W/T = 7.1 mm as per API 5L latest edition having following specification : 1. Deg of Bend: 60 Deg,bend radius 6D, 2. Pipe Out side diameter: mm, 4. Weight per meter : kg/m. 5. Test Pressure: 145 kg/cm2 v) Deg of Bend : 45Deg Bend radius R=6D where R is the radius of the bend and D is the diameter. Bend,Bevel Ended, Pre- coated by Radius Bend, 45 Deg. Fabricated from Line Pipe 10"(273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS-2, W/T = 7.1 mm as per API 5L latest edition; 5. Deg of Bend: 45 Deg 2., Bend radius 6D, 6. Pipe Out side diameter: mm, 7. Thickness : 7.1 mm, 8. Weight per meter : kg/m 9. Test Pressure: 145 kg/cm 2 Bend,Bevel Ended, Pre- coated by Radius Bend, 60 Deg. Fabricated from Line Pipe 10" (273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS-2, W/T = 7.1 mm as per API 5L latest edition having following specification : 1. Deg of Bend: 60 Deg,bend radius 6D, 2. Pipe Out side diameter: mm, 4. Weight per meter : kg/m. 5. Test Pressure: 145 kg/cm2 170 Bend,Bevel Ended, Pre- coated by Bend, 90 Deg. Fabricated from Line Pipe 10" (273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS-2, W/T = 7.1 mm as per API Bend,Bevel Ended, Pre- coated by per ISO latest edition, 90 Deg. Fabricated from Line Pipe 10" (273.1 mm), NB ERW/LSAW/HSAW, Grade X-46, PLS- 2, W/T = 7.1 mm as per API 5L latest edition having following specification : Page 3 of 6
4 5L latest edition having following specification : 1. Deg of Bend: 90 Deg, bend radius 6D, 2. Pipe Out side diameter: mm, 4. Weight per meter : kg/m 6. Test Pressure: 145 kg/cm2 1. Deg of Bend: 90 Deg, bend radius 6D, 2. Pipe Out side diameter: mm, 4. Weight per meter : kg/m 6. Test Pressure: 145 kg/cm2 B. Amendment in Annexure-IA of NIT : Tender clause Existing Clause no Para-6.1 to 6.13 shall also cover scope for 3 layer polyethylene coating for the LR bends. Amended as SCOPE OF WORK AND SPECIFICATIONS FOR POLYETHYLENE HEAT SHRINKABLE COATING OF LR BENDS: Reference code ISO ,latest edition, Petroleum and Natural Gas Industries External Coating for Buried or Submerged Pipelines used in Pipeline Transportation Systems Part 3 Field Joint Coating. The maximum design temperature of the polyethylene heat shrinkable coating shall be 80 deg C The heat shrinkable coating material shall be as follows as per clause of the reference code ISO :- Type 14B-2 is a cross-linked heat shrinkable polyethylene-base material, with Tmax not greate than 80deg C., which applied with a liquid epoxy, FBE or any other compatible primer SURFACE PREPARATION Surface preparation shall be carried out according to clause 14.3 of the reference code Application of the coatings Application of the coating shall be carried out in accordance with clause 14.4 of the reference code. Page 4 of 6
5 Testing of the applied coatings Testing of the applied coatings shall be carried out in accordance with clause 14.5 of the reference code. Tests to be carried out :- i)thickness (as per Annex B of the code) ii)holiday detection (As per Annex C of the code) iii)peel strength (As per Annex H of the code and shall meet the requirements of iv)cathodic disbondment (As per Annex G of the code and shall meet the requirements of v)hot-water immersion test (As per Annex I of the code and shall meet the requirements of vi)impact resistance (As per Annex D of the code and shall meet the requirements of vii)indentation resistance (As per Annex E of the code and shall meet the requirements of viii)lap shear strength (As per Annex J of the code and shall meet the requirements of ix)thermal ageing resistance (As per Annex M of the code and shall meet the requirements of Coating identification shall be as per Table 14.1 of the reference code which shall be furnished to the Company Property of the type 14B-2 joint coatings PE-with primer) shall be as per Page 5 of 6
6 Table 17 of the reference code which shall be furnished to the Company Data sheet of the primer shall be furnished to the Company as per the reference code Data sheet of the Heat Shrinkable materials shall be furnished to the Company as per the reference code Conditions of coating application shall be recorded as per the reference code and shall furnished to the Company External coating of the bends by using 3 layer side extruded polyethylene coating as per Para-6.0 PART-A. External coating of the bends by using Polyethylene Heat Shrinkable Sleeve coating as per clause C. Amendment in Bid Closing/Bid Opening Date i) New Bid Closing Date & Time: (11:00 IST) ii) Sale of Tender Documents: (15:30 IST) iii) New Bid Opening Date & Time: (14:00 IST) All other terms and conditions of the Bid Document remain unchanged. Sd/- Aayush Somani MM (FD) (i/c) For GM-Materials For Resident Chief Executive Page 6 of 6
TECHNICAL SPECIFICATION FOR LEVEL CONTROL VALVE HANDLING WATER
ANNEXURE-C TO TENDER BAP/FGD/2012/OT-1 BONGAIGAON 3X250 MW FLUE GAS DESULFURIZATION SYSTEM TECHNICAL SPECIFICATION LEVEL CONTROL VALVE HANDLING WATER CUSTOMER : NATIONAL THERMAL POWER CORPORATION LIMITED
Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
GURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
TENDER COVER PAGE (CHECK LIST)
CORRIGENDUM 01 ON 15.06.2015 BHEL Tender Enquiry :: 15E0035 Dt: 21.05.2015 Due date extended up to 23.06.2015 BHEL NIT No :: NIT_22630 Dt: 22.05.2015 Tender Item :: SPBD FABRICATION ON JOB WORK BASIS TENDER
OIL INDIA LIMITED (A Govt. of India Enterprise) P.O. Duliajan , Assam. Fax No ,
Page : 1 / 4 10 03548380 OIL INDIA LIMITED (A Govt. of India Enterprise) P.O. Duliajan-786602, Assam. Fax No. 91-374-2800533, E-mail:material@oilindia.in Tender No. TUBING HEAD SPOOL Tubing Head Spool
SPECIFICATION FOR SINGLE-MODE OPTICAL FIBRES
SINGLE-MODE OPTICAL FIBRES SPECIFICATION FOR SINGLE-MODE OPTICAL FIBRES SPC-00571 JUNE 2006 Revision 3.00 NON-DISCLOSURE OF INFORMATION Information contained in this document is proprietary in nature and/or
OIL INDIA LIMITED DULIAJAN
ADVERTISEMENT EXPRESSION OF INTEREST (EOI) NO. EOI/O/339/2017-2018 Oil India Limited, a Government of India NAVARATNA Category Enterprise, engaged in the business of Exploration, Production & Transportation
001: 2007 CEB STANDARD
001: 2007 CEB STANDARD ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEYLON ELECTRICITY BOARD SRI LANKA Specification for ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEB Standard 001: 2007 CEYLON ELECTRICITY
TECHNICAL SPECIFICATION & DRAWINGS
TENDER DOCUMENT NIT No.: BHI/PI(S)/665/1053 FOR Tender for Detail Engineering, Manufacturing, Testing and Supply of SNUB PULLEY PACKAGE AND ASSOCIATED WORKS for the project of Augmentation of Raw Material
Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification
BRITISH STANDARD BS 8666:2005 Incorporating Amendment No. 1 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification ICS 77.140.15; 91:080.40 Committees responsible
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4019 Second edition 2001-09-01 Structural steels Cold-formed, welded, structural hollow sections Dimensions and sectional properties Aciers de construction Profils creux pour
1.1_KV PVC insulated PVC sheathed multicore Aluminium Cable (armoured & unarmoured)
WEST BENGAL STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED (A Govt. of West Bengal Enterprise) Office of the Chief Engineer, Procurement & Contracts Department Vidyut Bhavan, 4 th. floor, Bidhannagar,
Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT
An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant), TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT ENQUIRY NOTICE INVITING TENDER Phone: +91 431 257 7653 Fax
Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
CKS 440* *This standard references other standards Edition CKS. Coffins and caskets CKS 440 ICS ISBN
ICS 55.160 ISBN 0-626-09381-3 CKS 440* *This standard references other standards Edition 2 1993 CKS Coffins and caskets Published by THE SOUTH AFRICAN BUREAU OF STANDARDS Gr 6 Notice This specification
IS INTERNATIONAL STANDARD. Steel tubes - Continuous character marking and colour coding for material identification. First edition
INTERNATIONAL STANDARD IS0 9095 First edition 1990-04-01 Steel tubes - Continuous character marking and colour coding for material identification Tubes et &ments tubulaires en acier - Marquage codifikes
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15547-1 First edition 2005-11-01 Petroleum, petrochemical and natural gas industries Plate-type heat exchangers Part 1: Plate-and-frame heat exchangers Industries du pétrole,
JULY Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28781 First edition 2010-08-15 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment Industries du pétrole et
ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes
INTERNATIONAL STANDARD ISO 3601-1 Fifth edition 2012-03-01 Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes Transmissions hydrauliques et pneumatiques
Section COUPLINGS AND COUPLING ADAPTERS. This Section covers couplings and coupling adapters for ductile iron and steel pipe.
PART 1 GENERAL 1.01 SUMMARY Section 15155 This Section covers couplings and coupling adapters for ductile iron and steel pipe. 1.02 MEASUREMENT AND PAYMENT A. No separate payment for Work performed under
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1452-2 First edition 2009-12-01 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized poly(vinyl chloride)
ISO INTERNATIONAL STANDARD. Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties
INTERNATIONAL STANDARD ISO 657-14 Third edition 2000-03-15 Hot-rolled steel sections Part 14: Hot-finished structural hollow sections Dimensions and sectional properties Profilés en acier laminés à chaud
Basic Measurements for Pipe Inspections
Basic Measurements for Pipe Inspections Period 7 Basic Corrosion Course 2017 February 21-23, 2017 Mark Anderson-MTS 1 DOT 192.459 External corrosion control: Examination of buried pipeline when exposed.
ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
INTERNATIONAL STANDARD ISO 16812 Second edition 2007-02-15 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers Industries du pétrole, de la pétrochimie et du gaz naturel
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10407-2 First edition 2008-10-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Inspection and classification of used drill stem elements Industries du
ISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes
INTERNATIONAL STANDARD ISO 3601-1 Fourth edition 2008-07-01 Fluid power systems O-rings Part 1: Inside diameters, cross-sections, tolerances and designation codes Transmissions hydrauliques et pneumatiques
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN
Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN 12735 www.kembla.com.au Copper Tube L MM Kembla has been providing our customers with the highest quality and most
GOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
conductor Extruded Cross - Linked Polyethylene Insulated (XLPE) Power Cable Rated Voltage U 0 /U = 12/20 kv U 0 /U = 18/30 kv
Israel Electric Corporation Ltd. - Customer Division - National Network Unit Issued date: February 2018 THE ISRAEL ELECTRIC CORPORATION LTD. National Network Unit Specification No. NPS - 361 for Single
2.14 Main Cable Type HO7RN-F4G10-15 Metres each Chiller Tank Capacity- 75 Litres Compressor- 3.5 Tons Refrigeration type
PAGE 2 of 6 2.14 Main Cable Type HO7RN-F4G10-15 Metres each 2.15 (a) O/P Voltage-350V(Max.) (b) O/P Current 150A(Max.) 2.16 Chiller Tank Capacity- 75 Litres Compressor- 3.5 Tons Refrigeration type 2.17
API Buttress Connections
IDM Code GDL00382/2 / March 2018 API Buttress Connections Scope These guidelines apply specifically to the use of API Buttress connections. This document is based on API 5C1 standard which is the main
system Shrinkable jointing system for pre-insulated pipe systems
system Shrinkable jointing system for pre-insulated pipe systems system for linking pre-insulated pipes One single system for all joints The unique molecular structure of cross-linked polyethylene keeps
API 8 Round Connections
API 8 Round Connections Scope These guidelines apply specifically to the use of API 8RD (STC, LTC, EUE, NUE) connections. This document is based on API RP 5C1 which is the main document applicable for
TPS 49 EDITION 2 JUNE 2009
TPS 49 EDITION 2 JUNE 2009 Interim arrangements & guidance on the interpretation of IEC 61672 Sound Level Meters - Periodic Tests CONTENTS SECTION PAGE 1 Purpose and duration 2 2 Statement 2 3 Specific
Technical Specification. for 1.1 KV Copper Control Cable
WEST BENGAL STATE ELECTRICITY DISTRIBUTION COMPANY LIMITED (A Govt. of West Bengal Enterprise) Office of the Chief Engineer, Procurement & Contracts Department Vidyut Bhavan, 4 th. floor, Bidhannagar,
11-SDMS-03 REV. 02 SPECIFICATIONS FOR
11-SDMS-03 REV. 02 SPECIFICATIONS FOR XLPE INSULATED POWER CABLES FOR RATED VOLTAGES FROM 15 KV UP TO 36 KV (U m ) This specification is property of SEC and subject to change or modification without notice
Table Of Contents Casing Head 02 Christmas Tree & Tubing Head Tubing Spool 04 Contact Us
Table Of Contents Casing Head 02 Christmas Tree & Tubing Head 03 Tubing Spool 04 Contact Us 05 1 www.sapwellsglobal.com Casing Head Specialized large-diameter pipe lowered into an open hole and cemented
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 671.11 b 2 " GM 778 No 1015.83 c 2.5 " GM 778 No 1360.54 d 3 " GM 778 No 1705.26 e 4 " CI 14846 No 2394.67 f 5 " CI 14846 No 3084.09 g 6 " CI 14846 No
DISTRIBUTION VAULT 8' x 14' x 9'-4" DEEP TRAFFIC FLAT WALL WITH 5' x 8' OPENING
CU16003K REV 8' x 14' x 9'4" DEEP TRAFFIC FLAT WALL 0113 SHEET 1 OF 6 CU 16003K CU16003K REV 8' x 14' x 9'4" DEEP TRAFFIC FLAT WALL 0113 SHEET OF 6 CU 16003K ITEM (PER ENDWALL): A. 6" DIAMETER PVC CONDUIT
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62055-51 First edition 2007-05 Electricity metering Payment systems Part 51: Standard transfer specification (STS) Physical layer protocol for one-way numeric and magnetic card
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8503-4 Second edition 2012-02-15 Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates
Non-destructive testing Image quality of radiographs. Part 2: Determination of the image quality value using step/hole-type image quality indicators
INTERNATIONAL STANDARD ISO 19232-2 Second edition 2013-06-15 Non-destructive testing Image quality of radiographs Part 2: Determination of the image quality value using step/hole-type image quality indicators
Corrosion-Resistant Coated Dowel Bars
Standard Specification for Corrosion-Resistant Coated Dowel Bars AASHTO Designation: M 254-06 (2010) American Association of State Highway and Transportation Officials 444 North Capitol Street N.W., Suite
SUBMITTAL REVIEW Underground Natural Gas Piping Data Sheets GCAN. Notes: 1. See engineer s comments. Submittal: No. 016.
SUBMITTAL REVIEW Submittal: No. 016.00 Spec Section: 3 113 Underground Natural Gas Piping Reviewed By: Laura Landon, Comma-Q Architecture Date: June 1, 01 Project: BPS Belgrade Elementary School Location:
PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
ISO 1519 INTERNATIONAL STANDARD. Paints and varnishes Bend test (cylindrical mandrel) Peintures et vernis Essai de pliage sur mandrin cylindrique
INTERNATIONAL STANDARD ISO 1519 Third edition 2011-01-15 Paints and varnishes Bend test (cylindrical mandrel) Peintures et vernis Essai de pliage sur mandrin cylindrique Reference number ISO 1519:2011(E)
Project: # Solano Community College District
ADDENDUM #02 Project: #16 007 Solano Community College District Horticulture Site Improvements Date: April 26, 2016 The following clarifications are provided based on questions received or changes in District
TQ 402 & TQ 412 / EA 402 / Proximity System : TQ 402 & TQ 412 Proximity Transducers EA 402 Extension Cable IQS 452 Signal Conditioner FEATURES
: TQ 402 & TQ 412 Proximity Transducers EA 402 Extension Cable IQS 452 Signal Conditioner TQ 402 & TQ 412 / EA 402 / IQS 452 FEATURES Non-contacting measurement system based on eddy current principle Certified
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60099-4 Edition 2.1 2006-07 Edition 2:2004 consolidated with amendment 1:2006 Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems IEC 2006 Copyright
TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT
III IV. Annexure-1 TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT I- INPUT & OUTPDUT Rated Power : 95 / 125 KVA at 50% duty cycle. Primary Voltage : 415V, 2 Phase, 50 Hz Secondary Voltage : 12.5 Volts
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR , INDIA
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR 721302, INDIA No. IIT/CHEMISTRY/FURNITURE/2017-18 /A Date: 08 th May, 2018 _Procurement and Installation of Laboratory furniture and fume hoods in Chemistry Laboratory,
AS/NZS :2011. Gate valves for waterworks purposes AS/NZS :2011. Part 2: Resilient seated. Australian/New Zealand Standard
Incorporating Amendment No. 1 Australian/New Zealand Standard Gate valves for waterworks purposes Part 2: Resilient seated This joint Australian/New Zealand standard was prepared by joint Technical Committee
Anticipated schedule, Page 2. Change the Contract Term from 635 Days to be 1,127 Days.
This addendum is hereby made part of the Request for Bid for the above-named project and shall be taken into consideration by all firms preparing a submittal on this project. Acknowledge receipt of this
QUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
High Voltage Instrumentation Cables for the ITER Superconducting Magnet Systems
High Voltage Instrumentation Cables for the ITER Superconducting Magnet Systems Summary for Call for Nominations 1. Background and scope ITER will be the world's largest experimental facility to demonstrate
ISO 105-X18 INTERNATIONAL STANDARD. Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials
INTERNATIONAL STANDARD ISO 105-X18 First edition 2007-09-01 Textiles Tests for colour fastness Part X18: Assessment of the potential to phenolic yellowing of materials Textiles Essais de solidité des teintures
Interpretations No. 1 to ANSI/ASME 831.8
Interpretations No. 1 to ANSI/ASME 831.8 (This supplement Is not part of ANSIIASME 831.8 or the Addenda It is included for Information only.) It has been agreed to publish lnterpretations issued by the
ISO/TR TECHNICAL REPORT
TECHNICAL REPORT ISO/TR 13624-2 First edition 2009-12-01 Petroleum and natural gas industries Drilling and production equipment Part 2: Deepwater drilling riser methodologies, operations, and integrity
Figure 11 Flange Adapter and Back-Up Ring
Flange Adapters Standard back-up rings are Standard back-up rings are convoluted ductile iron with AWWA C207 150 lb drilling. One edge of the back-up ring bore must be radiused or chamfered. This edge
SPECIFICATION FOR APPROVAL 1/8W 0816 LOW RESISTNACE CHIP RESISTOR
PAGE : 1 OF 11 1/8W 0816 LOW RESISTNACE CHIP RESISTOR 1. Scope This specification applies to 0.8mm x 1.60mm size 1/8W, fixed metal film chip resistors rectangular type for use in electronic equipment.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13953 First edition 2001-09-15 Polyethylene (PE) pipes and fittings Determination of the tensile strength and failure mode of test pieces from a butt-fused joint Tubes et raccords
INTRODUCTION PROPERTIES
INTRODUCTION T he experience and success of the present day Nepro factory is based on its inception in 1968 to be the leading, specialized manufacturer and supplier of PVC, CPVC pipes and fittings. Now,
Group F : Sl. No. - 1) 33/0.403 KV, 100 KVA Station Transformer GUARANTEED & OTHER TECHNICAL PARTICULARS. Table : A
Group F : No. - 1) 33/0.403 KV, 100 KVA Station Transformer GUARANTEED & OTHER TECHNICAL PARTICULARS Table : A No. Description 1. Make & Manufacturer 2. Place of Manufacturer 3. Voltage Ratio 4. Rating
COMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
TCN 01. Page No. 1 of 2 Ref: PSER:SCT:ABJ:T1178:TCN-01 Date:
TCN 01 Page No. 1 of 2 Ref: PSER:SCT:ABJ:T1178:TCN-01 Date: 21-02-2011 Sub Tender Change Notice (TCN- 01). Job Identification & Receipt of materials, Erection, Testing, Commissioning, Handing over etc
TECHNICAL SPECIFICATION FOR 11KV, 3C x95mm mm 2 AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED)
TECHNICAL SPECIFICATION FOR 11KV, 3C x95mm 2 + 80mm 2 AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of, 3C x95mm 2 +
GRICE-TRIVERS JOINT VENTURE ARCHITECTS PAGE 1 PROJECT NO
PAGE PROJECT NO. 0-0 0 0 0 0 0 DATE: PROJECT: GATEWAY STEM ATHLETICE FIELD ALTERATIONS GATEWAY STEM HIGH SCHOOL - ST. LOUIS PUBLIC SCHOOLS 0 MCRTEE AVENUE ST. LOUIS, MISSOURI 0 TO BID DOCUMENTS DATED DECEMBER,
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara. Price List w.e.f. 06/02/2015
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 731.60 b 2 " GM 778 No 1107.39 c 2.5 " GM 778 No 1483.17 d 3 " GM 778 No 1858.95 e 4 " CI 14846 No 2610.50 f 5 " CI 14846 No 3362.06 g 6 " CI 14846 No
Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015
Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015 Special Notes API publications necessarily address problems
ISO 5001 INTERNATIONAL STANDARD. Cold-reduced carbon steel sheet for vitreous enamelling
INTERNATIONAL STANDARD ISO 5001 Fourth edition 2007-07-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
INTERNATIONAL STANDARD ISO 7465 Third edition 21-12-1 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charge Guides de cabine et de contrepoids
Gujarat Green Revolution Company Limited P. O. Fertilizernagar , Dist: Vadodara.
1 Non Return Valve, Low Friction a 1.5 " GM 778 No 661.04 b 2 " GM 778 No 1000.59 c 2.5 " GM 778 No 1340.13 d 3 " GM 778 No 1679.68 e 4 " CI 14846 No 2358.75 f 5 " CI 14846 No 3037.83 g 6 " CI 14846 No
015 : 1993 CEB STANDARD
015 : 1993 CEB STANDARD UNGALVANIZED STAY ASSEMBLIES CEYLON ELECTRICITY BOARD SRI LANKA Specification for UNGALVANIZED STAY ASSEMBLIES CEB Standard 015 : 1993 CEYLON ELECTRICITY BOARD No. 50, Sir Chittampalam
INGAA Foundation Workshop - Industry Initiatives Regarding Welding of Field Segmented Induction Bends and Elbows for Pipeline Construction
INGAA Foundation Workshop - Industry Initiatives Regarding Welding of Field Segmented Induction Bends and Elbows for Pipeline Construction October 20, 2011 Steve Rapp, P.E. Spectra Energy Transmission
ISO 7438 INTERNATIONAL STANDARD. Metallic materials Bend test. Matériaux métalliques Essai de pliage. Second edition
INTERNATIONAL STANDARD ISO 7438 Second edition 2005-06-15 Metallic materials Bend test Matériaux métalliques Essai de pliage Reference number ISO 7438:2005(E) ISO 2005 PDF disclaimer This PDF file may
MGVCL/MM/ /2082/11KV AB CABLE TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES 1. Qualifying Requirement of AB Cable Manufacture/Supplier The manufacturer should have manufactured, successfully type tested
Note: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
ANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE
Speciation cum Compliance Certificate for Floor Type CNC H.B.M: Indent No. CG7A0109 ANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE SNO Tool Description Qty Remarks 1 Stub
/TENDER ENQUIRY NO :ENQ/17-18/005148/BP26(07) Delivery Schedule. Test Certificate
A.O Building, Barsingsar-440, Bikaner District, Rajasthan, India /TENDER ENQUIRY NO :ENQ/7-8/00548/BP6(07) /DATE :7/0/08 /Page - Due Date of Cover-I Opening : /04/08 :00:00 hrs. IST (Check NLC eproc website
INVITATION FOR BID (IFB) IFB NO. GSWA
INVITATION FOR BID (IFB) IFB NO. GSWA-005-16 AGAT AND MALOJLOJ RESIDENTIAL TRANSFER STATION IMPROVEME AND DEDEDO RESIDENTIAL TRANSFER STATION CLOSURE ADDENDUM NO. 6 September 22, 2016 ALL BIDDERS MUST
1. INTRODUCTION 2. REFERENCE SPECIFICATIONS. Page -1- Bonding and Grouting
Page -1-1. INTRODUCTION 1.1 Scope This specification covers non-shrink and epoxy grouting of structural column base plates and equipment bases, Portland cement grout for minor elements and bonding agents
ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film
INTERNATIONAL STANDARD ISO 17636-1 First edition 2013-01-15 Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film Contrôle non destructif des assemblages soudés
PRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends
PRODUCT CATALOGUE Pipestar now offering full-line of flanged Arcbends Pipestar offers a range of seamless long radius Arc HDPE sweep bends made to the highest quality standards. Pipestar offers a range
INTERNATIONAL. High-voltage test techniques Partial discharge measurements
INTERNATIONAL STANDARD IEC 60270 Third edition 2000-12 High-voltage test techniques Partial discharge measurements This English-language version is derived from the original bilingual publication by leaving
Engineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
The Manitoba Water Services Board SECTION Standard Construction Specifications September 2013 Page 1 of 8
September 2013 Page 1 of 8 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work described herein shall consist of the construction of air release chambers, flushout chambers, valve chambers, meter chambers
TQ 401 / EA 401 / IQS 451. Proximity System : TQ 401 Proximity Transducer EA 401 Extension Cable IQS 451 Signal Conditioner FEATURES
Proximity System : TQ 401 Proximity Transducer EA 401 Extension Cable IQS 451 Signal Conditioner FEATURES Non-contacting measurement system based on eddy current principle Certified for use in potentially
TCN Ref: PSER:SCT:RKL-M1797:TCN-03 Date:
TN - 03 Ref: PSER:ST:RKL-M1797:TN-03 Date: 20-02-2017 Sub Tender hange Notice (TN) - 03 Job Design, Engineering, Manufacturing, Supply, Erection, Testing, ommissioning, Etc Of Air onditioning System For
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60728-11 Second edition 2005-01 Cable networks for television signals, sound signals and interactive services Part 11: Safety IEC 2005 Copyright - all rights reserved No part
Tore Aarsland. Chairman of the Editorial Revision Committee / Senior Design C6 Technologies. 10-Jan-13
Tore Aarsland Chairman of the Editorial Revision Committee / Senior Design Engineer @ C6 Technologies 10-Jan-13 1. The well barrier philosophy of the standard is harmonised to NORSOK D-010. The use of
Contents DIN 50125:
14 Contents Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Types, dimensions, and designation... 4 4.1 General... 4 4.2 Type A test pieces... 6 4.3 Type B test pieces...
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10424-2 First edition 2007-11-15 Petroleum and natural gas industries Rotary drilling equipment Part 2: Threading and gauging of rotary shouldered thread connections Industries
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Mission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
Annex to application for conformity assessment of Heat meters in accordance with MID
This is Annex No. 1 Dated: To application dated: Company Signed Documentation required (to be completed by applicant) for testing of Heat meter or sub-assemblies Note: All documentation must be equipped
ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type
INTERNATIONAL STANDARD ISO 7465 Fourth edition 27-11-15 Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type Ascenseurs et monte-charges Guides de cabine et de contrepoids
TESTING OF BURIED PIPES BY SLOFEC TECHNIQUE IN COMBINATION WITH A MOTOR-DRIVEN CRAWLER SYSTEM. W. Kelb, KontrollTechnik, Germany
More Info at Open Access Database www.ndt.net/?id=18480 Introduction TESTING OF BURIED PIPES BY SLOFEC TECHNIQUE IN COMBINATION WITH A MOTOR-DRIVEN CRAWLER SYSTEM W. Kelb, KontrollTechnik, Germany In 2001