Product catalogue. Professional Tools for the Flooring Trade. 1 Tools for Flooring Professionals. Part Number. Part Number

Transcription

1 catalogue Professional Tools for the Flooring Trade ANTI BOUNCE MALLET LASERMETER F DELPHIN PAINTED POLISHED SUPER HOOK BLADE 100 CONCAVE BLADE 100 LONG STRAIGHT BLADE - 60 mm DC CUTTER - 18 mm For assembling LVT click planks. Shocks absorbed. Does not leave marks. Weight : 880 g. Quick, simple, lightweight, accurate. Measures from the front or the rear base. 2-line digital screen (last measure and result) Simple or continuous measurement. Measures distance, surface, volume. Pythagoras feature (2 points, 3 points). Addition / Subtraction. Supplied with holster, strap, 2 AA batteries Made of cast aluminium. Opening by turning the knurl on the side. Supplied with a protective plastic case, without blade. Red paint finish. Supplied without blade. Finely polished, shiny finish. Supplied without blade. Thickness 0.65 mm. Packed in safety dispenser. Thickness 0.65 mm. Packed in safety dispenser. 60 mm, thickness 0.65 mm. Packed in safety dispenser. Strong locking by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card RAZAR BLACK BLADE - 18 mm 100 STANDARD SNAP OFF BLADES - 18 mm HIGH-TECH 100 BLADES FOR HIGH-TECH CARPET & VINYL 100 BLADES FOR CARPET AND VINYL «PROVINOL» EDGE Narrower sharpening angle for finer cut. Highly alloyed steel, longer lifespan. Black surface treatment - for better blade slide, - to prevent glue adhesion - to avoid oxidisation. Width 18 mm. Thickness 0.50 mm. 7 segments. Angle adjustment by tilting the knurl. Small angle "A" is required for a perfect cut of a thick floor covering and larger angle "B" is required for a thin one. Uses blades Supplied with 2 blades. Thickness 0.65 mm. Registered design. For easy trimming of thin floor coverings. Uses blades Supplied with 2 blades (not mounted), packed in blister card. Thickness 0.65 mm. For PVC and linoleum. Supplied with an adjustable Ø 40 mm round blade. Seamless cut wall to wall from 2 to 27 mm. Suitable for cutting: 2 overlapping strips protective edges on linoleum rolls SPARE BLADES FOR «PROVINOL», Ø 40mm 1 Tools for Flooring Professionals

2 95520 LINO-CUT JOINT CUTTER For cutting PVC and linoleum. Adjustable cutting depth. Can be used in both directions SPARE BLADES FOR LINO-CUT TRIANGULAR To make a "V" groove. For GERFLOR floor coverings. Wide joints. Wooden handle. Brass plated ferrule. Dimensions: 24 x 6 cm MITRE SHEARS WALL SCRIBER MINI UNROLLING TROLLEY INTERNAL ANGLE DOUBLE ANGLE STEEL CORK PRESS For cutting wooden tackless strips, PVC profiles, tiling etc. For drawing along walls using a pencil. Ideal for coving PVC or linoleum or installing skirtings or edge profiles. Length: 21 cm. Max. height: 20 cm. Supplied with one pencil. For floor covering unrolling and handling. Rustproof steel structure. 4 Ø 60 mm nylon wheels, 2 of which with brake. Dim.: L. 320 x W. 250 x H. 200 mm. Max. load: 100 kg. For "breaking" and smoothing the wall covering in internal angles. For smoothing internal and external angles. Wooden handle. Metal shank. For butt joints of floor coverings. Does not damage the material, even fragile. Especially adapted to be used alongside skirtings. Width: 50 mm. Weight: 1 kg. To smooth PVC and linoleum floor coverings without marking surface. Dimensions: 300 x 120 x 25 mm THICK RULER To guide the grooving tool when making grooves for PVC hot welding. Thickness: 4 mm. Dimensions: 800 x 60 x 4 mm. Mill alu WALL To make a "U" groove in thin wall coverings (e. g. in shower cubicles). Pre-adjusted unique blade depth SPARE BLADE FOR WALL ROUNDED LINEA PICO To make a "U" (round) groove. Universal groover. Length: 24 cm. Tight joint. To make a "U" groove without ruler, in a regular and uniform way. Frame with 4 guiding castor wheels. Tight joint. To make a "U" groove without ruler, in a regular, uniform and rapid way. New guiding system (no play) for more precision. Can be used in both directions. Tight joint SPARE BLADES FOR 95175, 95120, «U» shape, adjustable FOR SAFETY FLOORS To make a "U" groove in very hard carborundum-based floor coverings (TARASAFE). Supplied with a fitted double sided blade + guide SPARE BLADE FOR SAFETY 2 sides «MASTER TURBO» (Patented in Europe & USA) Perfectly guided, no need to adjust, extremely simplified use. Suitable for small and large surfaces. Supplied with 2 grooving blades for 4 mm rods SPARE GROOVING BLADE for (Pack of 2) LIGHTWEIGHT RUBBER To smooth all kinds of floors. Allows to smooth with the body weight (pressure from 8 to 80 kg). Length: 1.30 m. Total width: 45 cm. Weight: 5 kg TRIAC-ST ELECTRONIC GUN Hot air outflow up to 230 l/min. Continuously adjustable temperature from 20 C to 700 C. Heat protection. Electronic element protection. Power: 1600 W. 230 V. Weight: 1.3 kg. Noise level: 65 db. Supplied with a standard push fit nozzle. 2 Tools for Flooring Professionals

3 95028 COVING ANTI-GLAZE RAPID Ø 4-5 mm Similar to the anti-glaze rapid nozzle but with a curved slot, designed for coving welding TURBO RAPID Suitable for welding PVC and linoleum, especially for coving welding (curved nozzle) BASIC FLOOR KIT PVC case including 13 elements: 1 LEISTER TRIAC-ST welding gun push fit nozzle holder nozzle 1 grooving tool quarter moon knife trimming guide anti-glaze rapid nozzle nozzle brush spare blades leather pouch spare element rapid nozzle sharpening stone wire brush SWAN NECK TRIANGULAR RAPID Ø 4-5 mm ANGLE FINISHING For finishing angles. For melting the rod in angles by applying pressure. For welding PVC wall coverings. For melting the rod in angles by applying pressure BRUSH To remove melted rod residues from nozzle ducts. Length: 16 cm TEMPLATES FOR SKIRTING ANGLES For grooving in coved skirting angles TEMPLATES FOR SKIRTING ANGLES For grooving in coved skirting angles PRO FLOOR KIT SPARE «TRIAC ST» ELEMENT SPARE «TRIAC BT» ELEMENT SPARE «TRIAC S» ELEMENT ANTI-GLAZE RAPID Ø 4-5 mm Complete PVC case including 16 elements: 1 LEISTER TRIAC-ST welding gun push fit nozzle holder nozzle 1 grooving tool spare blades spare element anti-glaze rapid nozzle wire brush nozzle brush coving anti-glaze rapid nozzle angle finishing nozzle flat angle template folded angle template trimming gouge flat blades «Mozart» trimming knife spare «Mozart» blades Narrow (0.9 mm) hot airflow directed right into the groove. For welding surface-treated PVC: it prevents groove edges from damage. Faster rod melting allows also faster welding BALL-PRESSURE SHAFT - SMOOTHER MOZART «2 in 1» TRIMMING SPARE BLADES FOR COMBI SCRIBER For pressing the covering when welding in internal angles. Ø 13 mm brass ball. For pressing coverings in internal angles, flat side for cove smoothing of skirtings. Revolutionary tool that combines - a trimming blade - a trimming guide that easily retracts for final trim. Supplied in a PVC box with 2 trimming guides 1 for PVC, th. 0.5 mm 1 for linoleum, th. 0.7 mm Dim. 170 x 30 x 30 mm. Weight: 165 g Turning lower guide rail allows use as standard or recess scriber. Length: 17 cm. Supplied with 10 needles and 3 blades SPARE NEEDLES FOR COMBI SCRIBER 3 Tools for Flooring Professionals

4 95410 JOINT SCRIBER For joint tracing. Length: 19 cm LONG SCRIBER STAIR TOOL 38 cm long, Wall or profiles contour transfer. Used to fix carpet behind the gripper after trimming. Polished chromium plated steel WELD Multipurpose trimmer, depending on inserted blade. To be used on cold rod only. Supplied with a rounded blade ROUNDED BLADES Ø 6mm FLAT BLADES POINTED BLADES COLD TUBE WITH APPLICATOR - A 44 gr. COLD TUBE WITH APPLICATOR - A 132 gr. Ø 6 mm For trimming welding rods alongside skirtings or in cove-cap skirtings, stairs angles. Pack of 2. For trimming rods alongside joints or in cove-cap skirtings. Pack of 2. For grooving. Pack of 2. For sealing 20 m of joints. For sealing 65 m of joints. DOWNLOAD THIS CATALOGUE OR ORDER FORM FROM : TOOL STORE : Gerflor Australasia, 17 Cato St (access via rear Cato Lane), Hawthorn East Hours : 8am-4pm TO PLACE YOUR ORDER CONTACT CUSTOMER SERVICE on or custorders@gerflor.com.au FOR TECHNICAL ADVICE CONTACT : Stephen King Tools for Flooring Professionals

5 Order Form Professional Tools for the Flooring Trade Price Qty ANTI BOUNCE MALLET LASERMETER F-04 DELPHIN PAINTED POLISHED 100 SUPER HOOK BLADE 100 CONCAVE BLADE 100 LONG STRAIGHT BLADE 60mm DC-561 CUTTER 18mm For assembling LVT click planks. Shock absorbing. Does not leave marks. Weight: 880g Quick, simple, lightweight, accurate. Measures from the front or the rear base. 2-line digital screen (last measure and result). Simple or continuous measurement. Measures distance, surface, volume. Pythagoras feature (2 points, 3 points). Addition / Subtraction. Supplied with holster, strap, 2 AA batteries. Made of cast aluminium. Opening by turning the knurl on the side. Supplied with a protective plastic case, without blade. Red paint finish. Supplied without blade. Finely polished, shiny finish. Supplied without blade. Thickness 0.65mm. Packed in safety dispenser. Thickness 0.65mm. Packed in safety dispenser. 60mm, thickness 0.65mm. Packed in safety dispenser. Strong locking by turning the knurl. Stainless steel blade guide reinforced at the end. Can be used as a screwdriver. Elastomer handle: better grip. Supplied with 2 spare blades in the handle. Supplied in blister card. $29.98 $ $29.50 $9.50 $7.21 $55.00 $56.33 $47.00 $ Price Qty 50 RAZAR BLACK BLADE 18mm 100 STANDARD SNAP OFF BLADES 18mm HIGH-TECH 100 BLADES FOR HIGH- TECH CARPET & VINYL 100 BLADES FOR CARPET & VINYL <PROVINOL> EDGE Narrower sharpening angle for finer cut. Highly alloyed steel, longer life span Black surface treatment - For better blade slide - To prevent glue adhesion - To avoid oxidisation Width 18mm. Thickness 0.50mm. 7 segments. Angle adjustment by tilting the knurl. Small angle A is required for a perfect cut of a thick floor covering and larger angle B is required for a thin one. Uses blades Supplied with 2 blades. $30.38 $60.00 $57.00 Thickness 0.65mm. $58.65 Registered design. For easy trimming of thin floor coverings. Uses blades Supplied with 2 blades (not mounted), packed in blister card. $21.03 Thickness 0.65mm. $62.75 For PVC and linoleum. Supplied with adjustable Ø 40mm round blade. Seamless cut wall to wall from 2 to 27mm. Suitable for cutting: 2 overlapping strips Protective edges on linoleum rolls. 2 SPARE BLADES FOR <PROVINOL>, Ø 40mm $ $ Tools for Flooring Professionals

6 Order Form Price Qty LINO-CUT JOINT CUTTER For cutting PVC and linoleum. Adjustable $ cutting depth. Can be used in both directions. CUT $27.12 For cutting wooden tackless strips, PVC $55.83 profiles, tiling etc. For drawing along walls using a pencil. Ideal for coving PVC or linoleum or installing skirtings or $ edge profiles. Length: 21cm Max. height: 20 cm Supplied with one pencil. For floor covering unrolling and handling. Rustproof steel structure. 4 Ø 60 mm nylon wheels. $ of which with brake. Dimensions: L. 320 x W. 250 x H. 200 mm. Max. load: 100 kg For breaking and smoothing the wall $32.00 covering in internal angles. For smoothing internal and external angles. $32.00 Wooden handle. Metal shank. For butt joints of floor coverings. Does not damage the material, even fragile. Especially $59.00 adapted to be used alongside skirtings. Width: 50 mm Weight: 1 kg To smooth PVC and linoleum floor coverings without marking $25.00 surface. Dimensions: 300 x 120 x 25 mm To smooth all kinds of floors. Allows to smooth with the body weight (pressure from 8 to 80 $ kg) Length: 1.30m Total width: 45 cm Weight: 5 kg SPARE BLADES FOR LINO-CUT MITRE SHEARS WALL SCRIBER MINI UNROLLING TROLLEY INTERNAL ANGLE DOUBLE ANGLE STEEL CORK PRESS LIGHTWEIGHT RUBBER Price Qty TRIANGULAR THICK RULER WALL To make a V groove. For Gerflor floor coverings. Wide joints. Wooden handle. Brass plated ferrule. Dimensions: 24 x 6cm To guide the grooving tool when making grooves for PVC hot welding. Thickness: 4mm. Dimensions: 800 x 60 x 4 mm. Mill alu. To make a U groove in thin wall coverings (eg. in shower cubicles). Preadjusted unique blade depth. $33.60 $70.18 $ SPARE BLADE FOR WALL $ To make a ROUNDED U (round) groove. Universal groover. $31.00 Length: 24cm tight joint To make a U groove without ruler, in a regular LINEA and uniform way. Frame with 4 guiding castor $ wheels. Tight joint To make a U groove without ruler, in a regular, uniform and rapid way. New PICO guiding system (no play) for more precision. Can be used $ in both directions. Tight joint SPARE BLADES FOR 95175, 95120, U shape, adjustable $3.50 To make a U groove in very FOR SAFETY FLOORS hard carborundum-based floor coverings (TARASAFE). Supplied with a fitted double sided blade + guide. $ SPARE BLADE FOR SAFETY 2 sides $20.52 <MASTER TURBO> Perfectly guided, no need to adjust, extremely simplified use. Suitable for small and (Patented in large surfaces. Supplied $ Europe & USA with 2 grooving tubes for 4 mm rods SPARE GROOVING BLADE for (pack of 2) $ Hot air outflow up to 230l/min. Continuously adjustable from 20 C to TRIAC-ST 700 C. Heat protection. ELECTRONIC Electronic element protection. Power: 1600 W. GUN 230 V. Weight 1.3kg. Noise level: 65 db. Supplied with a standard push fit nozzle. $ Tools for Flooring Professionals

7 Order Form Price Qty BASIC FLOOR KIT PRO FLOOR KIT PVC case including 13 elements: 1 LEISTER TRIAC-ST welding gun push fit nozzle holder nozzle 1 grooving tool quarter moon knife trimming guide anti-glaze rapid nozzle nozzle brush spare blades leather pouch spare element rapid nozzle sharpening stone wire brush Complete PVC case including 16 elements 1 LEISTER TRIAC-ST welding gun push fit nozzle holder nozzle 1 grooving tool spare blades spare element anti-glaze rapid nozzle wire brush nozzle brush coving anti-glaze rapid nozzle angle finishing nozzle flat angle template folded angle template trimming gouge flat blades <Mozart> trimming knife spare <Mozart> blades $ $ Price Qty COVING ANTI-GLAZE RAPID Ø 4-5mm TURBO RAPID SWAN NECK TRIANGULAR RAPID Ø 4-5mm ANGLE FINISHING BRUSH SPARE <TRIAC ST> ELEMENT $ SPARE <TRIAC BT> ELEMENT $ SPARE <TRIAC S> ELEMENT $86.20 Narrow (0.9mm) hot airflow ANTI- GLAZE RAPID Ø 4-5mm4 directed right into the groove. For welding surface-treated PVC: It prevents groove edges from damage. Faster rod melting allows also faster welding. $56.00 TEMPLATES FOR SKIRTING ANGLES TEMPLATES FOR SKIRTING ANGLES BALL- PRESSURE SHAFT SMOOTHER MOZART <2 in 1> TRIMMING Similar to the anti-glaze rapid nozzle but with a curved slot, designed for coving welding. Suitable for welding PVC and linoleum, especially for coving welding (curved nozzle) For finishing angles. For melting the rod in angles by applying pressure. For welding PVC wall coverings. For melting the rod in angles by applying pressure. To remove melted rod residues from nozzle ducts. Length: 16cm For grooving in coved skirting angles. For grooving in coved skirting angles. For pressing the covering when welding in internal angles. Ø 13mm brass ball. For pressing coverings in internal angles, flat side for cove smoothing of skirtings. Revolutionary tool that combines A trimming blade A trimming guide that easily retracts for final trim Supplied in a PVC box with 2 trimming guides 1 for PVC, th. 0.5mm 1 for linoleum, th. 0.7mm Dimensions: 170 x 30 x 30 mm Weight: 165g $84.50 $ $37.00 $56.00 $48.00 $9.00 $13.50 $16.50 $63.87 $15.00 $ SPARE BLADES FOR $ Turning lower guide rail allows use as standard or COMBI recess scriber. Length: 17cm. SCRIBER Supplied with 10 needles and 3 $ blades SPARE NEEDLES FOR COMBI SCRIBER $ Tools for Flooring Professionals

8 Order Form Price Qty JOINT SCRIBER For joint tracing. Length: 19cm. LONG 38 cm long, wall or profiles SCRIBER contour transfer. Used to fix carpet behind the STAIR gripper after trimming. TOOL Polished chromium plated steel. Multipurpose trimmer, depending on inserted WELD blade. To be used on cold rod only. Supplied with a rounded blade Ø 6mm for trimming welding 2 ROUNDED rods alongside skirtings or BLADES Ø in cove-cap skirtings, stairs 6mm angles. Pack of 2. $74.68 $73.00 $17.91 $17.00 $ Price Qty 2 FLAT BLADES 2 POINTED BLADES COLD TUBES WITH APPLICATOR A 44 gr. COLD TUBE WITH APPLICATOR A 132 gr. For trimming rods alongside joints or in covecap skirtings. Pack of 2. $7.50 For grooving. Pack of 2. $7.60 For sealing 20 m of joints. $15.77 For sealing 65 m of joints. $36.21 Order Details *prices exclude GST Customer Name Delivery Address Contact Person Phone Fax : Address Customer Order Total cost will include delivery charges. Small satchels between $ $ GST Mainfreight small skid hg Melb metro only $ GST (on-forwarding charges to regional areas are the responsibility of the receiver). Interstate delivery cost over 5 kg price on request. Payment Details Credit Card Or Cash Payment $ Name on Card Card Expiry Date / To place your order contact Customer Service on or scan and your completed form to custorders@gerflor.com.au 4 Tools for Flooring Professionals