PRODUCT SPECS / NOTES

Size: px

Start display at page:

Download "PRODUCT SPECS / NOTES"

Edward Kelly
5 years ago
Views:

DO CLEARANCE As with all full overlay door styles, clearance of doors and drawers must be taken into consideration during the design process to assure proper operation of all doors, drawers and roll

1 PRODUCT SPECIFICATIONS / NOTES RiverRun Cabinetry provides a broad selection of cabinet sizes and accessories. DO REVEALS Our door reveals, on standard full overlay styles, are 1" at the top of all cabinets to allow for moulding application and ¼" reveal on all other sides. DO CLEARANCE As with all full overlay door styles, clearance of doors and drawers must be taken into consideration during the design process to assure proper operation of all doors, drawers and roll trays. PRODUCT SPECS / NOTES SINGLE DO CABINET HINGING Our cabinets are universally hinged. For the door to be hinged according to the designer s preference, it may need to be reversed in the field. VANITY CABINETS All vanity cabinets are 34 ½" tall and deep. TOE KICK MATERIAL All cabinets, including vanities, require toe kick material. This needs to be ordered in addition to the cabinetry. In keeping with a policy of continuous refinement, RiverRun Cabinetry reserves the right to alter specifications without general notice or obligation to make similar changes in previously produced product. 12/2013 page 1

2 STANDARD PRODUCT MATERIALS AND CONSTRUCTION Case Traditional face frame construction using select birch. Face frames are solid ¾" thick with 1½" stiles and rails. Mortise and tenon joints. Sides are birch veneered ½" plywood. The interior features a clear-coat finish and the exterior is stained to match the door. (Mt. Vernon and Hampton interior is a painted finish.) Shelves are 5/8" thick birch veneered plywood sealed with a clear-coat (painted coat for Mt. Vernon and Hampton), adjustable and front edge banded. For ease of installation, backs are framed with a ½" plywood hanging rail. Base cabinet backs extend to the floor providing optimal structural stability. Drawers ½ thick solid hard wood, dovetailed joints and clear-coated. Bottoms are ¼" birch plywood fully captured. Slides are undermounted full-extension soft close. Hinges: 6-way adjustable. Doors Bridgewater is a birch full overlay applied moulding door with 25/8 stiles and rails. The raised center panel is solid wood. Mortise and tenon joinery. Drawer fronts are 5-piece. Dalton (Cocoa and Sable) is a birch full overlay door with 2¾ stiles and rails. The center panel is a solid reversed raised panel. Drawer fronts are slab top drawer, 5-piece drawers all others. Hampton is premium MDF full overlay door featuring the same profiling as Bridgewater on the doors and drawers. Drawer fronts are 5-piece. Lenox is a birch full overlay applied moulding door with 2¼ stiles and rails. The raised center panel is solid wood. Mortise and tenon joinery. Drawer fronts are 5-piece. Mt. Vernon is premium MDF full overlay door with 2 ¾ stiles and rails. The center panel is a solid reversed raised panel. Drawer fronts are slab top drawer, 5-piece drawers all others. Shaker is a full overlay birch door with 2¼" stiles and rails. The panel is ¼". Mortise and tenon joinery. Drawer fronts are 5-piece. Reveals Wall cabinet doors have a ¼" reveal on the bottom and sides. The top reveal is 1" for moulding installation. Base cabinet doors have a ¼" reveal. The top drawer head has a ¼" reveal at the bottom and sides and a 1" reveal on top. Finish Valspar standard formulations are used. Catalyzed conversion varnish top coat with UV protection is applied to doors, drawers and face frames. Glazing is applied to the doors and drawer fronts of those styles which come with a glazed finish. Species: Birch STANDARD PRODUCT 12/2013 page 2

3 12 HIGH DOUBLE DO W3012 W3612 W3912 W (24 DEEP) 36" 30 & 36 HIGH SINGLE DO W930 W1230 W1530 W1830 W2130 W936 W1236 W1536 W1836 W " 18" 15 & 18 HIGH DOUBLE DO W3015 W3315 W3615 W3018 W3618 W (24 DEEP) 36" 30 & 36 HIGH DOUBLE DO W W W2730 W2736 W3030 W3036 W3330 W3336 W3630 W3636 W3930 W3936 W4230* W4236* *HAS CENTER STILE 21, 24, & 27 HIGH DOUBLE DO 42 HIGH SINGLE DO 27" W3021 W3024 W3027 W " W942 W1242 W1542 W1842 W HIGH X 24 DEEP DOUBLE DO REFRIGERAT CABINETS 42 HIGH DOUBLE DO W " W W2742 W3042 W3342 W3642 page 3

4 36" 42" 17" 30 & 36 HIGH SINGLE DO CNER CW2430 CW HIGH SINGLE DO CNER CW " 42" 27" 27" 15" 15" 17" 27" 27" 36 HIGH X 15 DEEP SINGLE DO CNER CW HIGH X 15 DEEP SINGLE DO CNER CW2742 CNER & BLIND 17" 15" 15" 17" BLIND WALL CABINET INSTALLATION RECOMMENDATIONS BY WIDTH MIN/MAX CABINET NUMBER ACTUAL CABINET WIDTH RECOMMENDED DIMENSIONS F INSTALLATION WIDTH OF DO OPENING BW24XX BW30XX BW36XX / / / /4 MAXIMUM ALLOWABLE WIDTH ACTUAL CABINET WIDTH TOP VIEW OF RIGHT BLIND WALL CABINET INSTALLATION DO OPENING WIDTH FILLER 15" RECOMMENDED ADJACENT WALL CABINET NOTE: DER FILLER SEPARATELY MEASUREMENTS BASED ON DESIGN USING A 4 1/2 VERTICAL IN FACE FRAME 30 & 36 HIGH SINGLE DO BLIND 42 HIGH SINGLE DO BLIND 36" BW2430 BW3030 BW3630 BW2436 BW3036 BW " BW2442 BW3042 BW3642 page 4

5 5" 5" 9" 5" TOP VIEW 30 HIGH X 12 DEEP 1/4 ROUND SHELVES WQR HIGH X 12 DEEP 1/4 ROUND SHELVES 18 " 10³ 8" 2¾" 17" DIAGONAL APPLIANCE GARAGE ADAG NOTE: SINGLE DO HINGED TO SIDE STILE NOTE: NO BOTTOM PANEL, NO UNDER RAIL APPLIANCE GARAGE WITH DOS WALL SPECIALTY CABINETS WQR642 ADG2418-BD 42" 9 9 /16" 18 " NOTE: FULL-FRAME CABINET NOTE: CAN BE USED AS A W2418 TOP VIEW 5" 18 HIGH X 12 DEEP MICROWAVE 12 DEEP WALL GANIZERS & SHELVES 18" MWS3018X12 NOTE: SHELF IS 17 DEEP 6" WO306 NOTE: OPENING WIDTHS ARE 10 1/2 AND 5 1/4 MADE OF 3/4 VENEER PLYWOOD WITH INTERIS FINISHED TO MATCH & FRONT EDGES BANDED 3 45" 14" 26" 1" 19" 16½" 33 & 45 HIGH X 18 DEEP MICROWAVE WMW WMW " 36" 12 DEEP WALL GANIZERS & SHELVES WO366 NOTE: OPENING WIDTHS ARE 10 1/2 AND 5 1/2 18" 1½" 27" 1½" NOTE: SUPPLIED WITH AN OVERLAY FACE FRAME WITH OPENING DIMENSIONS: 25 W X 14 3/8 H TRIMMABLE INTERI IS CLEAR COATED NATURAL BIRCH MADE OF 3/4 VENEER PLYWOOD WITH INTERIS FINISHED TO MATCH & FRONT EDGES BANDED page 5

6 18" 12 DEEP WALL WINE RACKS NOTE: HOLDS 18 TO 20 BOTTLES. FINISHED INTERIS WR DEEP WALL WINE RACKS NOTE: HOLDS 18 TO 20 BOTTLES. FINISHED INTERIS WR / / /8 23-3/8 or 29-3/ / / /32 or 29-13/ /8 44-3/8 or 50-3/ or /2 CONTEMPARY ARCHED HOOD 36, 42, & 48 WIDE RH36CTARCH RH42CTARCH RH48CTARCH NOTE: DOES NOT COME WITH BLOWER UNIT. TRIM EXTENDS PAST THE 36, 42, AND 48 MEASUREMENTS CONTEMPARY STRAIGHT HOOD 36, 42, & 48 WIDE RH36CTSTR RH42CTSTR RH48CTSTR WALL SPECIALITY CABINETS 18" 20-5/ /8 44-3/8 or 50 3/8 NOTE: DOES NOT COME WITH BLOWER UNIT. TRIM EXTENDS PAST THE 36, 42, AND 48 MEASUREMENTS 12 DEEP WINE CUBBIES CONTEMPARY CHIMNEY 6" WCU30 NOTE: CAN BE INSTALLED VERTICALLY HIZONTALLY 23-1/2 RH36CTCHIM RH42CTCHIM RH48CTCHIM MADE OF 3/4 VENEER PLYWOOD WITH INTERIS FINISHED TO MATCH & FRONT EDGES BANDED 9-3/ or 27 NOTE: DOES NOT COME WITH BLOWER UNIT. COMPATABLE WTIH 36, 42, & 48 CONTEMPARY ARCHED & STRAIGHT HOODS MULLION DOS MD SEE DER FM F AVAILABLE SIZES NOTE: GLASS NOT SUPPLIED NOTE: MULLION DOS F DOUBLE DO CABINETS COME IN PAIRS page 6

7 3 FULL HEIGHT SINGLE DO B9 29½" 18" FILE DRAWER (STANDARD TOP DRAWER & LARGE BOTTOM DRAWER) DDB18 TOP DRAWER HEAD ON FULL OVERLAY STYLES 6 3/4 HIGH, THE SIDES ARE 3 3/8 HIGH BOTTOM DRAWER HEAD ON FULL OVERLAY STYLES 16 1/2 HIGH, THE SIDES ARE 11 3/8 HIGH 3 SINGLE DO & DRAWER B12 B15 B18 B21 3 DOUBLE DO & DRAWER B24-2* B36 B27* B39 B30 B42** B33 THREE DRAWER *SINGLE DRAWER HEAD **WILL HAVE CENTER STILE 3 SINGLE TOP DRAWER ON ALL SIZES TOP DRAWER HEIGHT IN FULL OVERLAY STYLES 6 1/2, SIDE DEPTH 2 1/2 BOTTOM DRAWERS HEIGHT IN FULL OVERLAY STYLES 10 1/2, SIDE DEPTH 5 1/2 DB12 DB15 DB18 DB21 DB24 DB30 DB36 3 DOUBLE DO SINK SB30 SB33 SB36 SB42** **WILL HAVE CENTER STILE 3 17" ANGLED TRANSITIONAL W/FULL HEIGHT DO (LEFT SHOWN) TAB12FHDL TAB12FHDR PULL OUT SHELF TRAYS ROT B15 ROT B18 ROT B21 ROT B24 ROT B27 ROT B30 ROT B33 ROT B36 3 1½ " 16¼" MICROWAVE/DISH DRAWER BM30 27 WIDE OPENING DRAWER HEAD HEIGHT IN FULL OVERLAY STYLES 11, SIDE DEPTH 5 1/2 ALL-WOOD DOVETAIL DRAWERS EPOXY COATED UNDERMOUNT GLIDES WILL FIT INTO TALL UNITS NATURAL BIRTCH INTERI page 7

8 3 3 42" 42" 26½" 42" 42" SINGLE DO CNER SINK FRONT CSF42 SINGLE DO CNER SINK DSB42 36" 36" 16" /2" 25" /8" 3 25" EASY REACH CNER ER36 NOTE: DOUBLE HINGED DOS NOTE: DER LAZY SUSAN SEPARATELY EASY REACH CNER ER33 NOTE: DOUBLE HINGED DOS NOTE: DER LAZY SUSAN SEPARATELY CNER & BLIND 26½" 4-1/2" BLIND BASE CABINET INSTALLATION RECOMMENDATIONS BY WIDTH CABINET NUMBER BB36** BB42 BB48 ACTUAL CABINET WIDTH MIN/MAX RECOMMENDED DIMENSIONS F INSTALLATION WIDTH OF DO OPENING 11 1/2 X 28 3/4 14 1/2 X 21 3/4 20 1/2 X 21 3/4 MAXIMUM ALLOWABLE WIDTH ACTUAL CABINET WIDTH TOP VIEW OF RIGHT BLIND BASE CABINET INSTALLATION 27" RECOMMENDED DO OPENING WIDTH FILLER NOTE: MINIMUM PULL RECOMMENDATION INCLUDES 3 STILE REVEAL TO CNER DER FILLER SEPARATELY **FULL-HEIGHT DO, NO DRAWER ADJACENT BASE CABINET 3 SINGLE DO & DRAWER BLIND BB36 -NO DRAWER BB42 BB48 LAZY SUSANS SEE DER FM F AVAILABLE OPTIONS & SIZES page 8

9 DEEP VANITY VB12 VB15 VB18 21 DEEP VANITY THREE DRAWER VDB12 VDB15 VDB18 VDB21 VDB " 15" 15" 21 DEEP RIGHT DOUBLE DRAWER & DOUBLE DO VANITY SINK VSB36* VSB42** VSB48** *SIDE-MOUNT DRAWER GLIDES **WILL HAVE CENTER STILE 21 DEEP TWO DRAWER & FOUR DO VANITY SINK VSB60 VANITIY 3 21 DEEP DOUBLE DO VANITY SINK V24-2* V27 V30 V33 V36 V42** *SINGLE FALSE DRAWER HEAD **WILL HAVE CENTER STILE 3 60" 21 DEEP FOUR DRAWER & TWO DO DOUBLE VANITY SINK VDB DEEP LEFT DOUBLE DRAWER & SINGLE DO VANITY SINK VSDL30 VSDL36 NOTE: TWO FALSE DRAWER HEADS 24 or or 36 4¾" VANITY LAP DRAWER KD30 KD36 NOTE: DRAWER HEAD IS SLAB WITH EDGE PROFILE TRIMMABLE 3 STILE EACH SIDE OF DRAWER EACH DRAWER CAN BE TRIMMED UP TO 6 21 DEEP RIGHT DOUBLE DRAWER & SINGLE DO VANITY SINK 3 VSDR30 VSDR36 NOTE: TWO FALSE DRAWER HEADS page 9

10 84" 90" 18" 27" 3 39" 48" 84, 90, & 96 HIGH X 18 WIDE SINGLE DO UTILITY CABINETS P1884 P1890 P1896 SINGLE DO ON TOP & BOTTOM 84 AND 90 HIGH CABINETS HAVE 3 ADJUSTABLE SHELVES & 1 FIXED SHELF 96 HIGH CABINETS HAVE 5 ADJUST- ABLE SHLEVES & 1 FIXED SHELF END PANELS ARE FULL HEIGHT 32 ½" 52½" 36 ¾" 26 ½" OVEN CABINET OVERLAY PANEL DETAIL OUTSIDE EDGE IS PROFILED NOTE: THIS PANEL COMES WITH OVEN CABINETS NOTED W/OL NOTE: CHECK STOCK SHEET F AVAILABILITY TALL CABINETS & BOOKCASES 84" 90" 27" 3 39" 48" 84, 90, & 96 HIGH X 24 WIDE DOUBLE DO UTILITY CABINETS P2484 P2490 P2496 BUTT DOS ON TOP & BOTTOM 84 AND 90 HIGH CABINETS HAVE 3 ADJUSTABLE SHELVES & 1 FIXED SHELF 96 HIGH CABINETS HAVE 5 ADJUST- ABLE SHLEVES & 1 FIXED SHELF END PANELS ARE FULL HEIGHT 48, 54, 60, & 66 HIGH X 18, 24, 30, 36 WIDE BOOKCASES BU1848S BU1854S BU1860S BU1866S BU2448S BU2454S BU2460S BU2466S BU3048S BU3054S BU3060S BU3066S BU3648S BU3654S BU3660S BU3666S NOTE: BOOKCASES ARE OFFERED THROUGH THE MODIFICATIONS PROGRAM AND EXTEND LEAD TIME 84" 90" 3 18" 45" 84, 90, & 96 HIGH DOUBLE OVEN CABINETS WITH SINGLE DRAWER OC3384D OC3390D OC3396D END PANELS ARE FULL HEIGHT 84, 90, & 96 HIGH X 18, 24, 30, 36 WIDE BOOKCASES BU1884S BU1890S BU1896S BU2484S BU2490S BU2496S BU3084S BU3090S BU3096S BU3684S BU3690S BU3696S NOTE: BOOKCASES ARE OFFERED THROUGH THE MODIFICATIONS PROGRAM AND EXTEND LEAD TIME 5¼" 6¾" page 10

11 5 / 8" ¾" 7 / 8" ¼" 3 / 8" ¾" 5/8 SCRIBE MOULDING SMB OUTSIDE CNER MOULDING OCM8 DENTIL MOULDING DMTIS 1 7 /8" 7 /8" 3 1 /8" 3 /8" 1 7 /8" 2¾" 2 3/4 CROWN MOULDING CM8 ROYAL CROWN MOULDING RCM4S LARGE CROWN MOULDING ACCESSIES - MOULDINGS & TOE KICK ROPE MOULDING BCM8 RPIS 3¾" ¾" 2¼" 1½" TRADITIONAL LIGHT RAIL MOULDING LRM8 2½" 2½" SHAKER CROWN MOULDING SCM NOTE: CHECK STOCK SHEET F AVAILABILITY SHOE MOULDING SM ½" ½" 5 / 8" BASE MOULDING 5 / 8" BM ³ 16" TOE KICK COVER 3/16 X 4 1/2 X 96 TKS8 5 /8" page 11

12 13 ³ 8" 10" 6½" 5¾" LARGE CBEL LC14 NOTE: UNGLAZED MEDIUM CBEL MC10 NOTE: UNGLAZED 2 7 / 8" 5" 2 13 /16" 1 11 /16" BUN FOOT BUNFOOT TULIP BUN FOOT TBUNFOOT ACCESSIES - DECATIVE ACCENTS 7½" PLAIN CBEL PLC10.5 2½" COLUMN PILASTERS INDIVIDUAL PARTS NOTE: UNGLAZED 6½" BLOCK BLOCK 10½" SPINDLE SPINDLE PC36 PC96 BECKONY VALANCE 36" (PC ) PLAIN (CUT TO SIZE) (FC) FLUTED (CUT TO SIZE) FC36 FC96 31", 37" 4 V31D V37D V43D NOTE: PILASTERS ARE ROUND AND MUST BE CUT F APPLIQUE APPLI- CATIONS. DIAMETER PILASTER IS 1 1/2. BLOCK SPINDLE AND COLUMNS ARE NOT GLAZED 31", 37" 4 ARCHED VALANCE V31E V37E V43E page 12

13 XX 6" XX ¾" 3 FILLER 3/4 X 3 X XX F330 F336 F342 F396 6 FILLER 3/4 X 6 X XX F630 F636 F642 F696 FLUTED FILLER 3/4 X 3 X XX F330F F336F F342F F396F NOTE: THREE FLUTES RUN THE LENGTH OF THE FILLER COLUMN BOX FILLER 3 6 WIDE X 12, 21, 24 DEEP X 30, 34 1/2, 36, 42 HIGH CBF33012 CBF33412 CBF33612 CBF34212 CBF39612 CBF33021 CBF33421 CBF33621 CBF34221 CBF39621 CBF33024 CBF33424 CBF33624 CBF34224 CBF39624 CBF63012 CBF63412 CBF63612 CBF64212 CBF69612 CBF63021 CBF63421 CBF63621 CBF64221 CBF69621 CBF63024 CBF63424 CBF63624 CBF64224 CBF69624 ACCESSIES - FILLERS & FILLER BOXES NOTE: COLUMN BOXES ARE OFFERED THROUGH THE MODIFICATIONS PROGRAM AND EXTEND LEAD TIME ¾" 4¼" 2" 2" ANGLED FLUTED FILLER 3/4 X 4 1/4 X 30 AFF330 NOTE: THREE FLUTES RUN THE LENGTH OF THE FILLER BEGINNING 2 IN FROM EITHER END COLUMN BOX FLUTED FILLER 3 WIDE X 12, 21, 24 DEEP X 30, 34 1/2, 36, 42 HIGH CBF33012 CBF33412 CBF33612 CBF34212 CBF39612 OVERLAY FILLER 2½" OVERLAY FILLER NOTE: SEE DER FM F AVAILABLE SIZES CBF33021 CBF33421 CBF33621 CBF34221 CBF39621 EXISTING FILLER CBF33024 CBF33424 CBF33624 CBF34224 CBF39624 NOTE: COLUMN BOXES ARE OFFERED THROUGH THE MODIFICATIONS PROGRAM AND EXTEND LEAD TIME page 13

14 ½" 3 ½" 1½" BASE END PANEL DWR3 (REVERSIBLE) REFRIGERAT END PANEL REP (REVERSIBLE) 5 /8" END PANEL DOS WEP X 30 WEP X 36 WEP X 42 WEP X 30 NOTE: WEPS MATCH DO REVEALS - 1/2 LESS WIDTH AND 1 1/4 LESS HEIGHT SHELF MATERIAL 12 X 96 NOTE: NATURAL BIRCH VENEER FINISHED TO MATCH DO ONE LONG EDGE BANDED ACCESSIES - PANELS & SHELF MATERIAL 48" ¼" SHT GRAIN PANEL 48 X 96 X 1/4 BP96X48SG 48" ¼" LONG GRAIN PANEL 96 X 48 X 1/4 BP48X96LG page 14

15 STANDARD MODIFICATION OPTIONS CABINET DEPTH CHANGE (1 increments) Reduce depth of cabinets (base -12 minimum, wall -4 minimum) ($362 for tall cabinets) PRICING cabinet + $232 or cabinet + $362 (talls) Increase depth of wall and vanity cabinets (maximum of 24 ) cabinet + $434 TOE KICK (installed on base, vanity, or pantry cabinets) Recess toe kick on one side of cabinet (right or left) cabinet + $226 Recess toe kick on both sides of cabinet (right or left) cabinet + $336 Toe kick space removed from bottom of cabinet (height less 4-1/2 ) cabinet + $333 TOE KICK (installed on wall cabinets) Install toe kick to front only (height plus 4-1/2 ) cabinet + $226 Install toe kick to one side of cabinet (right or left) (height plus 4-1/2 ) cabinet + $226 Add toe kick to both sides (right and left) (height plus 4-1/2 ) cabinet + $336 Install toe kick to front and one side (right or left) (height plus 4-1/2 ) cabinet + $336 Install toe kick to front and both sides (right and left) (height plus 4-1/2 ) cabinet + $449 FACE FRAME WITH DOS/DRAWER FRONTS ONLY Cabinet face frame, drawer front(s), and door(s) only CASE ONLY Cabinet case only (no doors or drawer fronts) Tall cabinet case only (no doors or drawer fronts) FINISHED INTERIS 75% X cabinet* 30% X cabinet* 50% X cabinet* Cabinet with finished interior cabinet + $362 PIPE CHASE CUT-OUT Pipe chase cut out on either (right or left) corner (width X depth) cabinet + $666 Pipe chase cut out in middle of cabinet (width X depth, locations) cabinet + $999 EXTENDED STILE (up to 3 on each side to a max of 4-1/2, 1 increments) Install extended stile on one side of cabinet (right or left) cabinet + $171 Install extended stile on both sides of cabinet (right and left) cabinet + $342 PENINSULA CABINETS Peninsula cabinet APPLIED MATCHING END PANELS Factory applied panels FULL DEPTH SHELVES 3 X cabinet* cabinet + WEP* Install full depth shelf in base cabinet cabinet + $290 PREP F GLASS Remove center panel in preparation for glass REVERSED BASE CABINET Base cabinet with drawer at bottom of cabinet FULL HEIGHT DO Install full height door on base cabinet cabinet + $73 per door cabinet* 2 X cabinet* MODIFICATIONS NOTE: MODIFICATIONS EXTEND LEAD TIME Pricing: this price includes purchase of cabinet + modification. Use the accessory multiplier to find net prices *Requires the cabinet syle multiplier, not the accessory multiplier to find net price. page 15

16 DO SIZE CHART CABINET DO WIDTH DO LENGTH ER B9, W W W ER B12, VB BB36, BW2430, W BW2436, W BW2442, W ADG2418-BD B24-2, SB24-2, V P2484, W P2490, W P2496, W P2484, P2490, P B27, V W W W AW AW AW TAB12FHDL, TAB12FHDR ADAG B15, BB42, VB15, VSB60, VSD30L, VSD30R CW2430, W CW2436, W CW2442. W W MWM W W W B30, SB30, V30, VSB W MWM W BW4230, W DO SIZE CHART CABINET DO WIDTH DO LENGTH W W W OC3384D B33, SB33, V OC3390D OC3396D, W W W B18, VB18, VSD36L, VSD36R P1884, BW3030, W P1890, BW3036, W P1896, BW3042, W P1884, P1890, P W3612, W W W3618, W B36, SB36, V36, VSB W3624, W W W W W B W W W B21, B42, BB48, SB42, V42, VSB W2130, W W2136, W W2142, W B45, SB45, V CSF42, DSB VDB60, VSB BW BW BW DO AND DRAWER SIZES page 16

17 DRAWER FRONT SIZE CHART CABINET DRAWER FRONT WIDTH DRAWER FRONT LENGTH KD KD B12, DB12, VB12, VDB12, VDB60, VSB42, VSB B15, BB42, DB15, VB15, VDB15, VSD30L, VSD30R, VSB B30, SB30, V B33, SB33, V B18, DB18, DDB18, VB18, VDB18, VSB42, VSD36L, VSD36R B36, SB36, V B B21, B42, BB48, DB21, SB42, V42, VDB CSF42, DSB B24-2, CSF42, DB24, V24-2, VDB24, VDB60, VSB B27, V DB30, VSB OC3384D, OC3390D, OC3396D DB DB12, VDB12, VDB DB15, VDB DB18, VDB DB21, VDB DB24, VDB DB DB BM DO AND DRAWER SIZES page 17

Blind Cabinet Installation Instructions

15" Recommended 27" Recommended Blind Cabinet Installation Instructions Cabinet Blind Wall Cabinets: By Width Actual Cabinet Width Recommended Installation Do Opening Width Maximum Allowable (See Recommended