Fitting & User Instructions
|
|
- Godfrey Woods
- 5 years ago
- Views:
Transcription
1 Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising of Armchirs, Recliner & Riser-Recliner chirs, Settees, Recliner Settees, Beds (Single to King Size) & Doule Divn Beds with legs, cstors, smll feet or wooden frmes with no feet t ll. IDENTIFICATION OF PARTS (ATTACHMENTS ) Frme (AL-0H) Height djustment screw nd plstic nut Adhesive Ruer Pd (Pge 3) Furniture Disc Riser (AL-03) (Pge ) Short Hnd Wheel Round Cup (AL-0) (Pge 4) Squre Cup (AL08-3 & 4) (Pge 5) Twin Cup Atts. (AL-06) (Pge ) Riser & Recliner Atts. (AL-) (Pge 8, 9 & 0) Flt Plte (AL-09) (Pge 7) Angle Brcket (AL-07) (Pge 6) 3-Sided Squre Cup (AL-3 & 4) (Pge 5) Mx Weight Loding - 635kg (00 stone) per pir. Any dditionl frmes used dds n extr 37kg (50 stone) per frme. Plese red these instructions crefully efore instlltion. User precutions: This product is only to e instlled for the purpose for which it is intended (for furniture plced on flt, stle nd horizontl surfce) nd only to e instlled y competent individul. An pproprite risk ssessment should e crried out efore instlltion. Ensure tht the rised furniture is stle efore use. This riser is for indoor use only. Check tightness of hnd wheels nd fixings periodiclly. Clen with dmp cloth. Use non-rsive detergent nd dry thoroughly. For lrger pieces of furniture you my require Extender Brs (EXT-B) supplied seprtely to increse the risers length. Chir, Settee nd Bed Rising Specilists Morris nd Alexnder Ltd, Wymns Wy, Fkenhm Industril Estte, Fkenhm, Norfolk, NR 8NT Tel: Fx: Certified to ISO 900 Pge of
2 Alexnder Furniture Disc Riser Fitting Instructions IDENTIFICATION of PARTS Alexnder Furniture Disc Riser Bse Frme (AL-03) Plstic nut Height djustment screw The Alexnder Furniture Disc Riser is intended to support dditionl legs/feet/cstors (sometimes referred to s The 5 th Leg ). It cn lso e used s furniture riser when 4 or more re used together. This product is only to e used for the purpose for which it is intended (for rising Armchirs, Settees, Beds (Single to King Size) & Doule Divn Beds with legs, cstors, smll feet or wooden frmes with no feet t ll. All Alexnder ttchments re suitle for use with the Furniture Disc Riser EXCEPT the 3-sided squre cups (AL-3 & 4) & the Riser & Recliner Attchment (AL-). See ville ttchments elow nd relevnt pge numers for how to fit. Round Cup (AL-0) (Pge 4) Squre Cup (AL08-3) (AL08-4) Supplied Sepertely (Pge 5) Angle Brcket (AL-07) (Pge 6) Flt Plte (AL-09) (Pge 7) Twin Cup Atts. (AL-06) (Pge 0) Ruer Pd (FDR-SR) () An pproprite risk ssessment should e crried out efore instlltion. Ensure tht ll cstors/feet/legs of the furniture will e supported. Ensure tht the furniture is plced on flt nd stle surfce. Ensure tht the rised furniture is stle efore use. Do not ttempt to move the furniture once rised s these risers my ecome dislodged. This riser is for indoor use only. Check tightness of hnd wheels nd fixings periodiclly. Clen with dmp cloth. Use non-rsive detergent nd dry thoroughly. Slip resistnt ruer pds re ville for lminte floors. Product Code: FDR-SR Pge of
3 Self Adhesive Ruer Pds (Mrk Riser Only) - Optionl The optionl self dhesive pds supplied re for use on lminte floors or ny other surfce requiring dditionl grip or protection. The pds should only e used for the purpose they re intended for, which is to provide extr grip/protection for certin floor surfces. Remove the cking pper from the ruer pd nd plce the pd on to smooth flt surfce, dhesive side up. Ensure tht the underside of the frme is clen nd free from grese/foreign mtter. Position the riser ove the ruer pd nd proceed to lightly plce the frme on to the ruer pd, eing creful to mke sure tht the frme stys ligned with the pd. Frme (AL-0H) Ruer Pd Check to mke sure the pd is lined up correctly (remove nd repet step if not) then proceed to push down on the riser to produce good ond with the ruer pd. Once stisfied tht the ruer pd is firmly ttched to the frme, the riser is then redy to e fitted with n ttchment - see pges 4-0. Pge 3 of
4 Alexnder Round Cup Attchment Instructions (AL-0) The round cup ttchment is for use on chirs, settees or eds hving cstors, or smll legs. It cn lso e used to rise some Recliner Chirs or Settees, nd some Riser Recliner Chirs. Adjust the riser height efore fitting. Secure height djustment using screw & plstic nut. Alexnder Round Cup Attchment (AL-0) Height Adjustment screw & plstic nut Alexnder Universl Riser MK (AL-0H) If furniture hs cstors, ensure tht the cstor is positioned s shown in fig nd the protector cp is fitted efore tightening the hnd wheel (fig ). For legged furniture, ensure tht the protector cp is fitted efore tightening the hnd wheel. PROTECTOR CAP TIGHTENED AGAINST CASTOR 3 Tighten the cups hnd wheel to clmp cstors/legs in plce (fig 3). Tighten short hnd wheel on side of risers to lock the riser's length (fig 3). Repet steps - 3 for the other side. Finlly, ensure the furniture is stle efore use. Pge 4 of
5 Squre Cup Atts. Instructions (AL08-3 & 4) & (AL-3 & 4) Two sizes of squre cup re ville: 9cm (AL08-3) &.5cm (AL08-4). The squre cups re intended for use on chirs, settees or eds hving legs up to 7.5cm & 0cm squre/round respectively. It cn lso e used to rise some Recliner Chirs or Settees, nd some Riser Recliner Chirs. The 3-sided squre cup is designed to give greter clernce for inclined or sweeping legs nd for eds tht hve solid hed/foot ords. The 4 nd 3-sided squre cups fit in the sme mnner. Alexnder 3-Sided Squre Cup Atts. (AL-3 & AL-4) Alexnder Squre Cup Atts. (AL08-3 & AL08-4) Alexnder Universl Riser MK (AL-0H) Height Adjustment screw & plstic nut Fit one riser t time. If the furniture hs inverted pyrmid shped feet which re too steep to effectively clmp to, secure the leg using wood screws (not supplied) through the holes locted in the se of the squre cup (fig ). Do not screw into plstic legs. PROTECTOR CAP TIGHTENED AGAINST Leg 3 Tighten ll cup hnd wheels to clmp the legs in plce (fig 3). Tighten short hnd wheel on side of risers to lock the riser's length (fig 3). Finlly, ensure the furniture is stle efore use. Pge 5 of
6 Alexnder Angle Brcket Attchment Instructions (AL-07) The ngle rcket ttchment should e used when chir, settee or ed hs no legs or cstors, ut hs wooden frme in contct with the floor. Adjust riser height to highest setting efore fitting (to llow ccess for screws). Secure height djustment using screw & plstic nut. Alexnder Angle Brcket Attchment (AL-07) Woodscrews 4mm (N 8) re provided per Brcket Height Adjustment screw & plstic nut Alexnder Universl Riser MK (AL-0H) Fit one riser t time. Position the chir/settee upside down. This is est chieved y slowly tipping it forwrd until it comes to rest with its underside fcing upwrds (fig ). Proceed to offer up the riser to the chir (ensuring tht when the riser is fitted the widest foot print on the floor should e chieved). Then y first using rdwl (not included) to prepre the hole, screw into the chir using the 4mm (N 8) woodscrews provided (fig ). screw on ech side of the ttchment is required. Tighten short hnd wheels on side of risers to lock the riser's length. Turn the chir the right wy up nd ensure the furniture is stle efore use. Pge 6 of
7 Alexnder Flt Plte Attchment Instructions (AL-09) The flt plte ttchment should e used when chir, settee or ed hs lrge or modern style wooden legs or feet (squre, round, L-shped, Inverted Pyrmid, rectngulr etc.). It cn lso e used to rise some Recliner Chirs or Settees, nd some Riser Recliner Chirs. Adjust riser height to highest setting efore fitting (to llow ccess for screws). Secure height djustment using screw & plstic nut. Alexnder Flt Plte Attchment (AL-09) 4 Woodscrew 4mm (N 8) re provided per plte. Height Adjustment screw & plstic nut Alexnder Universl Riser MK (AL-0H) Fit one riser t time. Position the chir/settee upside down. This is est chieved y slowly tipping it forwrd until it comes to rest with its underside fcing upwrds (fig ). Proceed to offer up the riser to the chir (ensuring tht when the riser is fitted the widest foot print on the floor should e chieved). Then y first using rdwl (not included) to prepre the hole, screw into the chir legs using the 4mm (N 8) woodscrews provided (fig ). 4 screws per plte re required. Tighten short hnd wheels on side of risers to lock the riser's length. Turn the chir the right wy up ensuring the furniture is stle efore use. Pge 7 of
8 Alexnder Recliner & Riser Recliner Instructions Pges 8,9 & 0 (AL-) Importnt!! This Chir Riser will not fit every Recliner nd Riser Recliner Chir. It is very importnt to estlish if this riser will fit your chir, filure to do so could result in dmge to your chir. If in ny dout contct: Morris & Alexnder on or e-mil info@morrisndlexnder.com IDENTIFY IF YOUR CHAIR CAN BE RAISED Yes No Anti-tip r fitted to front or rer. CAN BE RAISED Recliners or Riser Recliners tht:- Hs no nti-tip r. Hve only 4 feet or 4 cstors. Do not hve feet/cstors tht re visile under the rms of the chir when elevted (Riser Recliners only). CANNOT BE RAISED Recliners or Riser Recliners tht:- Hve n nti-tip r. Hve more thn 4 feet or 4 cstors comined. Hve feet/cstors not in contct with the floor in its elevted condition - (Riser Recliners only). Pge 8 of
9 For Electric or Mnully Operted Recliner Chirs & Recliner Settees (AL-) The recliner ttchment is designed to e used in conjunction with the AL-0H se frme. Position the chir/settee upside down. This is est chieved y slowly tipping it forwrd until it comes to rest with its underside fcing upwrds. Remove cstors or feet s shown elow (fig ). Insert M6x5mm screw with shouldered spcer into the Riser & Recliner Attchment. Offer up the riser to the chir/settee nd enter the M6 screw into the cstor fixing holes of the furniture (fig ). Recliner Fixing M6 x 5 Screw (x4) Shouldered spcer (x4) M6 nyloc nut (x4) Secure the riser using the supplied M6 nyloc nuts in ll four positions (fig ). Adjust the legs to the required height nd secure using height djustment screw nd plstic nut (fig ). Tighten the hnd wheels to fix the risers length. The ttchment cn e rotted 90 if necessry to fcilitte fitting. Alwys position the ttchment so tht the lrgest foot print on the floor is chieved. RE-LOCATE SCREW AND PLASTIC NUT TO ADJUST LEG HEIGHT Crefully plce chir upright y reversing the procedure in ''. The riser is now fitted nd redy for use. Notes:. Check the rised chir for stility efore use.. Imges of furniture in these instructions re figurtive nd simplified for clrity. The design of your recliner chir my differ from these imges. If in ny dout over the fixing of this riser to your recliner chir or settee, plese contct Morris & Alexnder Ltd Pge 9 of
10 For Single or Dul-Motor Operted Riser Recliner Chirs (AL-) The recliner ttchment is designed to e used in conjunction with the AL-0H se frme. Position the chir upside down. This is est chieved y slowly tipping it forwrd until it comes to rest with its underside fcing upwrds. Remove feet or levellers s shown elow (fig ). If the levellers or feet re ttched with nuts then retin these nuts for use in stge. Offer up the riser to the chir nd lign the fixing holes in the riser with the fixing holes of the chir. Riser Recliner Fixing Kit NOTE: 3 sizes of screw re supplied to ccommodte differing thred sizes of chir. M0 Screw (x4) 3/8 UNC Screw (x4) 5/6 UNC Screw (x4) M0 nd 5/6 Spring Wsher (x4) 5/6 Plin Wsher (x4) For chirs with threded fixing points, secure the riser legs to the chir using the pproprite screws in ll four positions (fig ). For chirs with through- hole fixing points use the previously removed nuts to secure the screws. Adjust leg to desired height nd secure using height djustment screw nd plstic nut (fig ). Tighten the hnd wheels to fix the risers length. The ttchment cn e rotted 90 if necessry to fcilitte fitting. Alwys position the ttchment so tht the lrgest foot print on the floor is chieved. or or Crefully plce chir upright y reversing the procedure in ''. The riser is now fitted nd redy for use. Notes:. Check the rised chir for stility efore use.. Imges of furniture in these instructions re figurtive nd simplified for clrity. The design of your riser chir my differ from these imges. If in ny dout over the fixing of this riser to your Riser Recliner chir, plese contct Morris & Alexnder Ltd Pge 0 of RE-LOCATE SCREW AND PLASTIC NUT TO ADJUST LEG HEIGHT
11 Alexnder Twin Cup Attchment Instructions (AL-06) The twin cup ttchment is for use on the middle section of doule divn eds hving cstors or smll legs. The twin cup ttchment is suitle for ll Alexnder Bse Frmes (AL-0, AL-0H, AL-03, AL-04) ut is est fitted in conjunction with the Alexnder Furniture Disc Riser. Adjust the riser height efore fitting. Secure height djustment using screw & plstic nut. Prior to instlltion, the ed should e emptied (mttress, drws etc.) so tht the ed cn e esily lifted. Alexnder Twin Cup Attchment (AL-06) Height Adjustment screw & plstic nut Alexnder Furniture Disc Riser (AL-03) Adjust the position of the cups with the wing-nuts provided. If furniture hs cstors, ensure tht the cstor is positioned s shown in fig nd the protector cp is fitted efore tightening the hnd wheel (fig ). For legged furniture, ensure tht the protector cp is fitted efore tightening the hnd wheel. Plese note tht the positioning of the hnd wheels is for illustrtion purposes only nd should e fitted so they present miniml trip hzrd. Doule Divn Joint PROTECTOR CAP TIGHTENED AGAINST CASTOR 3 Tighten hnd wheels to clmp cstors/legs in plce (fig 3). Finlly, ensure the furniture is stle efore use. Pge of
12 Notes: Pge of
Canopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION
EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationASSEMBLY INSTRUCTIONS 5PC Storage Dining Set
ASSEMLY INSTRUTIONS 5P Storge Dining Set Sers Stock # 56170 VL Stock #07-2204 U S T O M E R S E R V I E I N F O R M AT I O N Victory Lnd Group, Inc 1350 Munger Rd rtlett, IL 60103 WE: http://www.victorylndgroup.com
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More information* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More information670 Freestyle/Style Door with In-Line Panel
M 670 Freestyle/Style oor with In-Line Pnel Style Series Option Metl HK87 Slide MGNETIC PULL HNLE KIT with Mgnet Vinyl 083 JM E 989 MGNETIC OOR STOP N H900 PN HE SCREW C (CUH or MG) 781 HEER 716 HEER /
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationMulti-Point Astragal Prehanger Installation Instructions
Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter
More informationDRAWING TABLE SYSTEM
DRWING TBLE SYSTEM DT31, DT61S, & CDTC71 MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : CRETED NME THIS DRWING IS THE SOLE PROPERTY OF DIVERSIFIED WOOD CRFTS. IT MY NOT BE LTERED OR CHNGED WITHOUT
More informationHow to remove BRNS/BRFS series from a PWB
Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive
More informationTP Series - Triple PV Top of Pole Solar LED Lighting System
TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion
More informationUltimate Push Button Astragal Prehanger Installation Instructions
Ultimte Push Button Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure Kit Includes: Full Astrgl Full Length
More informationARK CHEVRON INSTALLATION GUIDE
ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationNOTE THAT THE HANDLE IS BELOW THE LOCK BASE
NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N
More informationUltimate Flip Lever Astragal Prehanger Installation Instructions
Ultimte Flip Lever Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Tpe Mesure Kit Includes: Full Astrgl Full Length Trim Strip Screw Pck Field Pck
More informationEAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS
EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS INSTALLATION PARTS LIST BRITISH PATENT NO. 2470778 EPH MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 32886 (AFTER SALES)
More informationDRAWER BASE DRAWING TABLE
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED B UPD STEP 1 NME ECN NO. : : : DIMENSION RE IN INCHES 1 OF 10 K:\DIVERSIFIED\\CD\.dwg, 9/25/2018 9:04:08 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1
More informationPB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars
PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best
More informationOperation Manual Sewing Machine
Opertion Mnul Sewing Mchine Product Code: 888-V64/V65/V66/V67 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this document efore using the mchine. We recommend tht you
More informationMODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS
MODEL POWERGLIDE SERIES INSTRUTIONS FOR INSTLLING SRGENT LOSERS WITH "H" HOLDER S SERIES NON SIZED DJUSTLE SIZES THRU 6 UTION: FILURE TO INSTLL OR DJUST PROPERLY MY RESULT IN INJURY OR DMGE. FOR SSISTNE,
More informationOperation Manual. Addendum. Embroidery Machine. Product Code: 884-T13
Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT
More informationTUR DOORS SHOWER DOORS
TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ
More informationIPA FITTINGS FOR VEKA DANLINE 70 A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR VEK DNLINE 70 2012 /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ 9, DK-9240 NIE TEL: (+4) 98 3 1 00 3 FITTINGS FOR VEK DNLINE 70 Table of Contents PGE Profile - VEK Danline 70 4 Suggestion
More informationOperation Manual. Sewing Machine KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX
Opertion Mnul Sewing Mchine Product Code: 885-V58/V59/V68/V69 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this document before using the mchine. We recommend tht
More informationLEITNER DESIGNS FULL SIZE / MIDSIZE LEITNERDESIGNS.COM V1 Page 1
LEITNER DESIGNS C T I V E C R G O S Y S T E M FULL SIZE / MIDSIZE LEITNERDESIGNS.COM SLES@LEITNERDESIGNS.COM 949-395-3049 V1 Page 1 SSEMBLY / INSTLLTION INSTRUCTIONS: CTIVE CRGO SYSTEM PRT NUMBERS: 00-6266-F-01-1135
More informationABOUT THIS MANUAL ABOUT THIS MANUAL
ABOUT THIS MANUAL ABOUT THIS MANUAL This mnul provides detils on IQ Designer, which is ville with the upgrde. Mke sure tht the mchine hs een upgrded to the most recent version. When you find this icon
More informationSeries Door with In-Line Panel (GIH / AHD)
600 7000 Series oor with In-Line Pnel (GIH / H) H900 P H 083 JM C 781 HR 716 HR / SILL ISRT H900 P H F H170 MGTIC STRIP H900 P H 083 JM H5195 STTIG LOCK VRTICL VIYL GLZIG X Y Z HORIZOTL VIYL GLZIG FRM
More informationOperation Manual Embroidery
Opertion Mnul Emroidery Emroidery nd Sewing Mchine Product Code: 882-W30 Be sure to red this mnul efore using the mchine. We recommend tht you keep this document nery for future reference. HOW TO USE
More informationEAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR
EAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR INSTALLATION PARTS LIST BRITISH PATENT NO:470778 MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454 388
More informationIPA FITTINGS FOR REHAU NORDIC
IP FITTINGS FOR REHU NORDIC DESIGN PLUS 2017 /S J. PETERSENS BESLGFBRIK JCOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) 98 35 15 00 3 FITTINGS FOR REHU NORDIC DESIGN PLUS Table of contents PGE REHU Nordic
More informationIPA FITTINGS FOR REHAU NORDIC DESIGN A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR REHU NORDIC DESIGN /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ, DK-240 NIE TEL: (+45) 8 35 15 00 3 FITTINGS FOR REHU NORDIC DESIGN Table of contents Profile - REHU Nordic Design 4 PGE FITTINGS
More informationIPA FITTINGS FOR ALUPLAST NORD-LINE A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR LUPLST NORD-LINE /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ 9, DK-9240 NIE TEL: (+4) 98 3 1 00 3 FITTINGS FOR LUPLST NORD-LINE Table of Contents Profile - luplast Nord-Line 4 FITTINGS IP
More informationOperation Manual. Product Code 885-V55. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX
Computerized Emroidery Mchine Opertion Mnul Product Code 885-V55 GETTING READY EMBROIDERY APPENDIX Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for
More informationGeneral Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House
Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =
More informationBasic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS...
Chpter 5 Bsic Emroidery BEFORE EMBROIDERING... 196 Emroidery Step y Step...196 Attching Emroidery Foot W+ with LED pointer...197 Attching the Emroidery Unit...197 Aout the Emroidery Unit... 197 Removing
More informationThe Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center
Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition
More informationGENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES
GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More informationAL Series. Tropical Lighting System. Installation Manual
AL Series Tropicl Lighting System Instlltion Mnul Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion instructions for the Sol Tropicl Lighting System (AL) Series solr LED
More informationMSRS90. Hi efficiency Notched and No-hand insert for MSRS90
MGCO MR90 Multiple Cutter i efficiency Notched nd Nohnd insert for MR90 1Notched insert reduces cutting force reduction t the first pss tle mchining without chtter 2mooth chip evcution Prevents frcture
More informationPLANNING & LAYOUT BENCH
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : : LL VLUES ± OVERLL CRETED 1 OF 5 K:\DIVERSIFIED\\CD\.dwg, 11/30/2015 9:58:11 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1 2 " SOCKET ND TORQUE WRENCH
More informationJob Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive.
Job Sheet 2 Vrible Speed Drive Opertion OBJECTIVE To instll nd operte Vrible Speed Drive. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. 1. On the Vrible Speed
More informationAquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;
Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with
More informationWhole House Fan. WHF 1500, GF 1500, WHF 3000 Installation Instructions. Parts List * Required Tools:
Whole House Fn WHF 1500, GF 1500, WHF 3000 Instlltion Instructions Prts List * Quntity 1 Fn Assemly w/ Set Screw (WHF 3000 Shown) (1) 1 2 Insulted Ducting (1) 3 Dmper Box (1) 4 Fn Grill (1) 5 HushMount
More informationIMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION INTRODUCTION Thnk you for purchsing this mchine. Before using this mchine, crefully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the correct opertion of the vrious functions.
More informationFrami transport hook Art. n models onward
999281902-02/2015 en-g The Formwork Experts. Frmi trnsport hook rt. n 588494000 2009 models onwrd Originl Operting Instructions Plese retin for future reference Originl Operting Instructions Frmi trnsport
More informationINSTRUCTIONS WEATHERBRAKE John Deere 3120, 3320, 3520 & 3720 with 300x Loader FITS
INSTRUCTIONS WETHERBRKE 2176 FITS John Deere 3120, 3320, 3520 & 3720 with 300x Loader General Offices 1132 W. 1ST STREET McPherson, KS 67460 Phone: (620) 241-3513 Web: www.femcomfg.com Form No. 286324400
More informationCHAPTER 2 LITERATURE STUDY
CHAPTER LITERATURE STUDY. Introduction Multipliction involves two bsic opertions: the genertion of the prtil products nd their ccumultion. Therefore, there re two possible wys to speed up the multipliction:
More informationROOF RACK INSTALLATION INSTRUCTIONS (FOR FITMENT TO EGR CANOPIES)
INSTLLTION INSTRUCTIONS (FOR FITMENT TO EGR CNOPIES) FORD RNGER XL and XLT - (2006 Production Onwards) HOLDEN COLORDO - (2006 Production Onwards) MITSUISHI TRITON MN - (2009 Production Onwards) Installation
More informationPacking List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage
More informationMFAH. Minimizes Burrs for High Quality Machining Results. Low Cutting Force Design
igh fficiency Milling Cutter for Finishing Aluminum MFA igh fficiency Milling Cutter for Finishing Aluminum MFA NW CG Imge Low Cutting Force Minimizes Burrs nd Chipping for igh Qulity Mchining Results
More informationLS7 CHEVROLET TOP MOUNT Installation Manual For Systems with A/C #13460 / #13490
LS7 CHEVROLET TOP MOUNT Installation Manual For Systems with /C #13460 / #13490 PLESE RED LL INSTRUCTIONS EFORE INSTLLING NY COMPONENTS OF THE TRU TRC SERPENTINE SYSTEM Important: Thoroughly read the instructions,
More informationRemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA
SEND SEND CLL CLL L " LCD COLOR MONITOR 4-29- COLOR CCD CMER 4-29- 486G VT 2 GX CUSTOMER UNIT CLL -8-999-6 LISTINGS ND PPROVLS CLSSIFIED TO UL 4R SFETY OF INFORMTION TECHNOLOGY EQUIPMENT UL TESTED TO THE
More informationMath Circles Finite Automata Question Sheet 3 (Solutions)
Mth Circles Finite Automt Question Sheet 3 (Solutions) Nickols Rollick nrollick@uwterloo.c Novemer 2, 28 Note: These solutions my give you the nswers to ll the prolems, ut they usully won t tell you how
More informationRadiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
More information* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
More informationPanel Installation Instructions (Revised 2/26/10) (Page 1 of 7)
Panel Installation Instructions (Revised /6/0) (Page of 7) Remove Hanger Frame Topcap by depressing tabs inside top slot of hanger frame and lifting up. Hold panel flush and in a STRIGHT LINE (80 degrees
More informationSeven Sisters. Visit for video tutorials
Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be
More informationmac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v
mc profile Mcintosh 10.5-10.10 Configurtion Guide Adoe Photoshop CS/CC Swgrss Virtuoso SG400/SG800 v20150427 Configurtion Guide - Photoshop CS/CC Swgrss SG400/800 Before proceeding, ensure the correct
More informationINSTRUCTIONS WEATHERBRAKE 2175 FITS. MF 1533,1540, 1635, 1643, 1648,1652, 1655, 1660 Challenger: MT 265B, MT 275B AGCO Allis: ST 34A, ST41A
INSTRUCTIONS WETHERBRKE 2175 FITS MF 1533,1540, 1635, 1643, 1648,1652, 1655, 1660 Challenger: MT 265B, MT 275B GCO llis: ST 34, ST41 General Offices 1132 W. 1ST STREET McPherson, KS 67460 Phone: (620)
More informationINSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS.
INSTALLATION & OPERATION INSTRUCTIONS FOR LEVER HANDLE LOCKSETS 999-00333E_EN FOR BRINKS HOME SECURITY INTERIOR LOCKING & NON-LOCKING LEVER HANDLE LOCKSETS. FITS DOORS 1-3/8" (35 mm) TO 1-3/4" (45 mm)
More informationMATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR
MATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR INSTALLATION PARTS LIST MOWV MOWP MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454
More informationHX-80N/80NAM. High Mount Outdoor Detector
HX-80N PIRs stndrd model HX-80NAM HX-80N with nti-mskin Lon distnce detection re (4.0 m) Flexible detection re settin with pltes nd flps Unique pyro element Intellient AND loic Hih Mount Outdoor Detector
More informationCABLE MANAGEMENT. Parts List
CABLE MANAGEMENT Prts List CONTENTS PARTS LIST 1 Dt Trunking 03 1.1 COMPACT dt 140x50mm 04 1.2 PROFILA dt 180x65mm 07 1.3 Antimicroil Trunking - COMPACT Dt 11 1.4 Antimicroil Trunking - PROFILA Dt, 13
More informationInstallation and Assembly: Projector Ceiling/Wall Mount
Installation and ssembly: Projector Ceiling/Wall Mount Models:PRG-EX, PRG-EX-S, PRG-EX-W PRG-EXB, PRG-EXB-S, PRG-EXB-W PRG-EXC, PRG-EXC-S, PRG-EXC-W R This product is intended for use with UL Listed products
More informationPatterns and Algebra
Student Book Series D Mthletis Instnt Workooks Copyright Series D Contents Topi Ptterns nd funtions identifying nd reting ptterns skip ounting ompleting nd desriing ptterns numer ptterns in tles growing
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
PPLICTION: 2003-15 1500/2500/3500 HD SILVERDO/SIERR EXTENDED C/DOULE C/CREW C INCLUDING DIESEL EQUIPPED & 03-0 CLSSIC MODELS PRT # 5-5165, 5-5155 HDX RUNNING ORDS UTOMOTIVE PRODUCTS, INC. 1 INSTRUCTIONS
More informationExercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION
Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You
More information1 tray of toffee 1 bar of toffee. 10 In the decimal number, 0 7, the 7 refers to 7 tenths or
Chpter 3 Deciml Numers Do you know wht DECIMAL is? In chpter, we delt with units, s, 0 s nd 00 s. When you tke single unit nd divide it into (or 0 or 00) its, wht we then hve re deciml frctions of whole
More informationOptions. Exposed Ends (EXP) Flush Ends (FL) Flush Unexposed Ends (FUE) Cabinet Systems Winter
Exposed Ends (EXP) Mtching specie veneer on 1/2" thick cbinet sides. Avilble in both Advntge nd Essence lines. Specify: L (Left), R (Right) or B (Both). 1/4" revel from edge of front frme to surfce of
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationAPPLICATION MANUAL. application manual >> ARMA-CHEK R. application manual
APPLICATION MANUAL R ppliction mnul >> ARMA-CHEK R ppliction mnul R R APPLICATION MANUAL 1 GENERAL 3» Working with Arm-Chek R 3» Tools for instlling Arm-Chek R 3» Correct use of Armflex dhesive 4» Applying
More informationASY P.O. BOX 729 TERRELL, TEXAS / PAGE 1 OF 13 SAM
203 Madix Inc., ll rights reserved ommon Parts 2 MXI GRI WIRE GRI SHELF WITH (GPWGS) MXI GRI FIXTURE PNEL (GPWFP) FIXTURE PNELS RE USE S EN SUPPORT. SHELF N E USE NYWHERE. MXI GRI REINFORMENT R 3 (GPR)
More informationPlease Do Not Return Product to Store!
Instlltion Guide for ndersen Luminire Retrctble Insect Screen Door with Slidewy Insect Screen System Designed for 6 wide by 80 tll single hinged doors with suitble mounting surfce. For instlltion help
More informationStudent Book SERIES. Fractions. Name
D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types
More informationABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC
User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...
More information001CK CK0012 FR-001CK0013 FR EN English
AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion
More informationFirst Round Solutions Grades 4, 5, and 6
First Round Solutions Grdes 4, 5, nd 1) There re four bsic rectngles not mde up of smller ones There re three more rectngles mde up of two smller ones ech, two rectngles mde up of three smller ones ech,
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 56076 08//0 0066. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO PRT NUMBER DESCRIPTION QTY 550 HDS-LSX LIFT SUPERSTRUCTURE 5509
More informationINSTALLATION INSTRUCTIONS
INSTLLTION INSTRUCTIONS GEN X STEP BRS PPLICTION: 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Double Cab 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Crew Cab 2015+ Chevrolet Silverado & GMC Sierra
More informationAbacaba-Dabacaba! by Michael Naylor Western Washington University
Abcb-Dbcb! by Michel Nylor Western Wshington University The Abcb structure shows up in n mzing vriety of plces. This rticle explores 10 surprising ides which ll shre this pttern, pth tht will tke us through
More informationInstruction Manual. Manual Furniture Mover. Note: Owner/Operator must read and understand this instruction manual before using the furniture mover.
Instruction Manual Manual Furniture Mover Note: Owner/Operator must read and understand this instruction manual before using the furniture mover. I - Contents 1. Application 2 Specifications 3.Assembly
More informationSafety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
More informationBOUTIQUE WALK-IN WITH TRAY AND HINGE PANEL
BOUTIQUE WLK-IN WITH TRY ND HINGE PNEL INSTLLTION PRTS LIST MODELS INCLUDING BLDE MIXER SSEMBLY: NWSC/TBH, NWSR/TBH, NWCC/TBH, NWST/TBH MODELS WITH TRY ONLY: NWSC/TH, NWSR/TH, NWCC/TH, NWST/TH NWST/TH
More informationGeometric quantities for polar curves
Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions
More informationNew Milling Series. Metric type is added for all line up!! Tough edge GT chip breaker MSE45-SF MTE90-SF. Wiper insert is added for MSE45-SF type.
New Milling eries Metric type is dded for ll line up!! Octgonl MOF mill MOF ough edge G chip reker sy edge djustment M45F qure Insert~90 houlders New MO90 Wiper insert is dded for M45F type. sy edge djustment
More informationStrata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More information6 BAY AV CREDENZA WITH DUAL DISPLAY MOUNT
D2/367M2 SSEMLY INSTRUCTIONS 6 Y V CREDENZ WITH DUL DISPLY MOUNT TIP HZRD WRNING! For use with video monitors weighing 175lbs (80kg) or less. Use with heavier televisions may result in instability causing
More informationOhio Sideboard MADE IN BRITAIN. Assembly Instructions - Please keep for future reference 314/7128
Ohio - 6+2 Sideboard ssembly Instructions - Please keep for future reference 14/7128 Dimensions Width - 120cm Depth - 9.5cm Height - 78cm MDE IN RITIN Important - Please read these instructions fully before
More information