Surface. Mount. Fasteners. Revised 608
|
|
|
- Bethanie Craig
- 5 years ago
- Views:
Transcription
1 Surface Mount Fasteners Revised 608
2 SURFACE MOUNT FASTENERS PEM ReelFast surface mount nuts, spacers, panel fasteners and R ANGLE fasteners are mounted to printed circuit boards in the same manner as other surface mount components prior to the solder reflow process. The fasteners are provided on tape and reel compatible with existing SMT automated installation equipment. Nuts and spacers are available in threaded and unthreaded sizes. Benefits of ReelFast SMT fasteners are: Faster assembly Reduced scrap Reduced handling Reduced risk of board damage that may occur when fasteners are improperly installed with off-line equipment Reduced loose hardware ReelFast SMT fasteners are recommended for reflow soldering designs. Contact our Applications Engineering Department for wave soldering solutions. SMT-2 Copyright 2004 PennEngineering.
3 TYPE SMTSO ReelFast SMT SPACERS/NUTS Look for the two groove trademark. Stencil Masking Examples C ØD Solder Pad E A L ØH Plated through hole not required. Thread Thru Thread or Min. ØH Hole Size ØD Length L ±0.13 Size x Hole Thru Hole Sheet A C E In Sheet Min. Solder (Length code in millimeters) Pitch Type Thickness Max. Max. ± Pad M2 x 0.4 SMTSO M M2.5 x 0.45 SMTSO M M3 x 0.5 SMTSO M M3.5 x 0.6 SMTSO M M4 x 0.7 SMTSO M SMTSO SMTSO Number Of Parts Per Reel / Pitch (mm) For Each Size Thread/Thru-Hole Length Size M2, M25, M3, M35, / / / / / / 16 M4, / / / / / / 16 Packaged on 13 recyclable reels. Tape width is 24mm. Supplied with Kapton patch for vacuum pick up. Reels conform to EIA-481. Part Number Designation SMTSO Type - M3 Thread or Thru Hole - 4 Length ET Finish MATERIAL: Carbon Steel. STANDARD FINISH: ET - Electro Plated Bright Tin, ASTM B 545, Class A W/ Clear Preservative Coating. OPTIONAL FINISH: DT - Matte Electro-Tin ASTM B 545, Class A W/ Clear Preservative Coating, Annealed. THREADS: Internal, ANSI/ASME B1.13M, 6H SMT-3
4 PANEL FASTENER COMPONENTS AND ASSEMBLY DATA RETAINER Packaged on 13 recyclable reels of 465 pieces. Tape width is 24mm. Supplied with Kapton patch for vacuum pick up. Reels conform to EIA-481. A R E Stencil Masking Examples Part Number Designation For Retainer C B ØD Solder Pad Plated through hole not required. SMTPR - 6 Type Retainer Size - 1 Shank ET Finish ØH A ØH ØD Retainer Part (Shank) Min. Sheet B C E R Hole Size In Sheet Min. Solder Number Max. Thickness ±0.08 Max. Nom. ± Pad SMTPR RETAINER MATERIAL: Carbon Steel. RETAINER STANDARD FINISH: ET - Electro Plated Bright Tin ASTM B 545, Class A W/Preservative Coating. RETAINER OPTIONAL FINISH: DT - Matte Electro-Tin ASTM B 545, Class A W/ Clear Preservative Coating, Annealed. SCREW Packaged in bags. L T E Available with six-lobe recess on special order. Part Number Designation For Screw Four dimples on head designate metric thread. PSHP - M3-0 L 001 C Metal Phillips Recess Type Thread Length Cap Color Style (Lobed) (Standard Black) (See page 5 for color capabilities) Screw Thread Length C E L T Driver Type ±0.25 ±0.25 ±0.3 Nom. Size PSHP M3 PSHP M #1 #2 CAP MATERIAL: ABS. Temperature limit is 200 F / 93 C. SCREW MATERIAL: Carbon Steel. SCREW FINISH: CN - Bright Nickel over Copper Flash. THREADS: External, ANSI/ASME B1.13M, 6g. (1) (1) As with all external plated threads, Class 6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 6h, per ANSI B1.13M, Sect Paragraph 8.2. Retainer and screw are sold separately. SMT-4
5 ASSEMBLY Simply snap screw into retainer to complete assembly. Black ABS cap standard. Optional molded-thru colors available. When Assembled Spring action of plastic fingers holds screw in retracted position. PSHP SMTPR PC Board P T 2 T 1 G Patented Screw Part Number Thread Thread Screw Retainer G P T 1 T 2 Total Size x Pitch Type Length Part Number ± 0.64 ± 0.64 Nom. Nom. Radial Float M3 x 0.5 PSHP M3 M3.5 x 0.6 PSHP M SMTPR SMTPR COLOR CAPABILITIES FOR TYPE PSHP SCREW The colors shown here (codes #002 thru #007) are non-stocked standards and available on special order. Since actual cap colors may vary slightly from those represented at the right, we recommend that you request samples for color verification. If you require a custom color or you need a color matched cap, please contact us. Std. Black #001 Red #002 Orange #003 Yellow #004 Green #005 Blue #006 Violet #007 Non-flammable UL 94-V0 plastic caps are available on special order. SMT-5
6 SURFACE MOUNT R ANGLE FASTENER Strong re-usable threads at right angle to PC board. NEW! T Grooves identify unified thread. Part Number Designation SMTRA M ET G J F C Type Thread Height Length Finish P K N D S P B Patented. Stencil Masking Examples L A Min. Hole Thread Thread Height Length Length Sheet Size A B C D Height G J K N P S P T Size x Type L Thick- In Sheet ±0.15 ±0.15 ±0.15 ±0.15 F ±0.15 Nom. Nom. Max. Max. ±0.08 Nom. Pitch ±0.13 ness ±0.15 M2 x 0.4 SMTRA M M2.5 x 0.45 SMTRA M M3 x 0.5 SMTRA M M4 x 0.7 SMTRA M Thread Pad Width Pad Length Hole Spacing Hole Size P A P L S H In Sheet Min. Min. ± M M M M P A Solder Pad Can be flush to edge. Plated through hole not required. P L Part Parts Pitch Tape Width Number Per Reel (mm) (mm) SMTRAM SMTRAM SMTRAM SMTRAM S H MATERIAL: Steel Grade Zinc Diecast. STANDARD FINISH: ET - Electro Plated Bright Tin, ASTM B 545, Class A W/ Clear Preservative Coating. OPTIONAL FINISH: DT - Matte Electro-Tin ASTM B 545, Class A W/ Clear Preservative Coating, Annealed. THREADS: Internal, ANSI/ASME B1.13M, 6H SMT-6
7 INSTALLATION NUTS AND SPACERS Kapton patch applied here for vacuum pick up. Solder paste applied to pad on PCB. Solder fastener in place using standard surface mount techniques. INSTALLATION PANEL FASTENER Kapton patch applied here for vacuum pick up. Solder paste applied to pad on PCB. Solder fastener in place using standard surface mount techniques. Screw snapped in place. INSTALLATION R ANGLE FASTENER Flat top for vacuum pick up. Solder paste applied to pad on PCB. Solder fastener in place using standard surface mount techniques. Undercut to accept solder fillet and permit flush to edge installation. ReelFast product performance is dependent upon application variables. We will be happy to provide samples for you to install. If required, we can also test your installed hardware and provide you with specific performance data. SMT-7
8 ADDITIONAL REELFAST SMT SOLUTIONS Surface mount technology can be applied to other fastener designs. Contact our Applications Engineering department for more information. RoHS compliance information can be found on our website. Specifications subject to change without notice. Check our website for the most current version of this bulletin. North America: Danboro, PA USA Tel: Fax: (USA Only) U.K. And Europe: Doncaster, England Tel: +44 (0) Fax: +44 (0) Asia/Pacific: Singapore Tel: Fax: Shanghai, China Tel: Fax: SMT-8 Visit our PEMNET Resource Center at CAGE-46384
Surface. Mount. Fasteners. Revised 908
Surface Mount Fasteners Revised 98 SURFACE MOUNT FASTENERS PEM ReelFast surface mount nuts, spacers, panel fasteners and R ANGLE fasteners are mounted to printed circuit boards in the same manner as other
Bulletin SSA-516 REV 817. PEM brand SNAP-TOP standoffs are designed for permanent installation into metal panels or PC Boards SSA SNAP-TOP STANDOFFS
Bulletin SSA-516 REV 817 PEM brand SNAP-TOP standoffs are designed for permanent installation into metal panels or PC Boards SSA SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs are designed for permanent installation
F A S T E N E R S F O R U S E W I T H P C B O A R D S
F A S T N R S F O R U S W I T H P B OA R S FASTNRS FOR US WITH P BOARS an satisfy component-to-board, board-to-board, and boardto-chassis production fastening needs using less attachment hardware. BROAHING
FASTENERS FOR USE WITH PC BOARDS BULLETIN
FASTNRS FOR US WITH P BOARS BULLTIN K 107 R e v. 509A FASTNRS FOR US WITH P BOARS an satisfy component-to-board, board-to-board, and board-to-chassis production fastening needs using less attachment hardware.
The edge you ve been waiting for
R I G H T A N G L E C L I N C H F A S T E N E R S The edge you ve been waiting for Revised 606 PEM R ANGLE RIGHT ANGLE CLINCH FASTENER TYPES RAA AND RAS Self-clinching PEM R ANGLE fasteners provide you
Ideal for today s compact electronics BULLETIN MPF
Ideal for today s compact electronics BULLETIN MPF 13 R e v 513 IDEAL FOR TODAY S COMPACT ELECTRONICS Laptops Notebooks/Ultrabook Devices Tablets/eReaders Cell/Smart Phones Gaming/Hand Held Devices Ultrabook
PEM VARIMOUNT BONDING FASTENERS
Bulletin VM-917 PEM VariMount bonding fasteners are assemblies comprised of standard PEM fasteners mounted permanently into base plates. VM PEM VARIMOUNT BONDING FASTENERS The PEM VariMount fastening system
S T U D S & Revised 406
C O N C E A L E D - H E A D S E L F - C L I N C H I N G S T U D S & S TA N D O F F S Revised 406 PEM CONCEALED-HEAD STUDS* AND STANDOFFS These studs and standoffs ensure permanent mounting in metal sheets
Fasteners. For Use in. Stainless. Steel Sheets. Revised 108
Fasteners For Use in Stainless Steel Sheets Revised 108 FASTENERS FOR USE IN STAINLESS STEEL SHEETS One of the very basics of self-clinching is that the fastener must be harder than the host sheet. Only
Lenovo IdeaPad U310 NoteBook
Lenovo IdeaPad U310 NoteBook 2012-09-12 Lenovo IdeaPad U310-Overview Lenovo IdeaPad U310-Overview Top View Left Side View Comments: Bottom View Both the top case and bottom case are aluminum alloy material
KEYHOLE STANDOFFS AND FASTENERS BULLETIN
BULLETIN SK 814 PEM KEYHOLE Standoffs ( SKC ) and sheet joining fasteners ( SKC-F ) are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply
Nokia 6 Cellphone. PennEngineering. April 7th, 2017 Xiaoming Chen. 1
Nokia 6 Cellphone April 7th, 2017 Xiaoming Chen PennEngineering 1 Overview Nokia 6 has a 5.5-inch FHD IPS display with a polarizer film covered with 2.5D Gorilla Glass for protection. The smartphone comes
KEYHOLE STANDOFFS AND FASTENERS BULLETIN
BULLETIN SK 616 PEM KEYHOLE Standoffs ( SKC ) and sheet joining fasteners ( SKC-F ) are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply
Bulletin TK-518. For attachment of thin panels to plastics, common casting materials and other similar materials. NEW!
Bulletin TK-518 For attachment of thin panels to plastics, common casting materials and other similar materials. NEW! TK TACKSERT PINS For attachment of thin sheets to plastics, common casting materials
Samsung Galaxy S7. PennEngineering. April 2016 by Larry Zhang & Xiaoming Chen. 25th. 1
25th April 2016 by Larry Zhang & Xiaoming Chen PennEngineering 1 Overview 2 Details & Findings Pictures and Description of the Samsung Galaxy S7 and the Disassembly Process. 3 Teardown Step1: Remove the
MI HDTV Interactive Set - Top Box. PennEngineering. 21 st April, 2015 by Chen Xiaoming & Zhang Larry. 1
MI HDTV Interactive Set - Top Box 21 st April, 2015 by Chen Xiaoming & Zhang Larry PennEngineering www.pemnet.com 1 MI HDTV Interactive Set - Top Box www.pemnet.com 2 MI HDTV Interactive Set - Top Box
PEM BRAND ACCESS HARDWARE
c c e s s H a r d w a r e PM BRND SS HRDWR PM brand access hardware is designed with captive screws to help keep parts to a minimum and eliminate risks associated with loose hardware that could fall out
Samsung Gear VR. PennEngineering. April 26, 2016 by XiaoMing Chen & Larry Zhang. 1
Samsung Gear VR April 26, 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 Samsung Gear VR Overview 2 Samsung Gear VR Details & Findings Pictures and Description of the Samsung Gear VR and the Disassembly
BrydgeAir Keyboard for ipad Air
BrydgeAir Keyboard for ipad Air May 3 rd. 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 BrydgeAir Keyboard for ipad Air Overview 2 BrydgeAir Keyboard for ipad Air Details & Findings Pictures and
Broaching-Type Fasteners Series CKF2 & CKFS2
Broaching-Type Fasteners CKF2 & CKFS2 CKF2 and CKFS2 broaching-type fasteners are designed for use on printed circuit boards and on most brittle or hard materials; such as, glass laminates, epoxy or resin
SPOTFAST FASTENERS BULLETIN
BULLETIN SF 1115 Allows permanent joining in metal to metal and metal to PCB/plastic panels Alternative to riveting and spot welding. No special installation equipment required. Flush or sub-flush on both
SELF-LOCKING FASTENERS
Bulletin LN-28 PEM self-clinching locknuts prevent mating hardware from loosening. LN SELF-LOCKING FASTENERS PEM SELF-CLINCHING LOCKNUTS PREVENT MATING HARDWARE FROM LOOSENING PEM self-clinching locknuts
Quarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
Google Pixel DISASSEMBLE. PennEngineering
Google Pixel DISASSEMBLE June 4th, 2018 Allen Wang PennEngineering www.pemnet.com 1 Google Pixel Teardown www.pemnet.com 2 Details & Findings Pictures and Description of the Google Pixel and our disassembly
Le Max2. PennEngineering. September 26 th 2016 by Larry Zhang. 1
September 26 th 2016 by Larry Zhang PennEngineering 1 Overview 5.7-inch Super AMOLED display with 2560 1440 resolution (Quad HD /2K) 2.21-megapixel rear camera with dual pixel autofocus, 4K video capture;
2x2 mm LGA Package Guidelines for Printed Circuit Board Design. Figure 1. 2x2 mm LGA package marking information.
2x2 mm LGA Package Guidelines for Printed Circuit Board Design This technical note is intended to provide information about Kionix s 2 x 2 mm LGA packages and guidelines for developing PCB land pattern
SELF-LOCKING FASTENERS BULLETIN
BULLETIN LN 216 Rev 816 PEM SELF-CLINCHING PREVAILING TORQUE LOCKNUTS PREVENT MATING HARWARE FROM LOOSENING PEM self-clinching prevailing torque locknuts provide ideal solutions to prevent mating hardware
MATERIAL & FINISH SPECIFICATIONS INSTALLATION. For Types FH, FHS, FHA, FHL, FHLS, TFH, TFHS, HFH, HFHB, HFHS and HFE studs
MTERIL & FINIS SPEIFITIONS s (1) Fastener Materials Standard Finishes Optional Finish (2) For use in Sheet ardness: External, Precipi- Zinc Per Zinc Per 50 or 55 or 70 or 80 or 85 or 92 or NSI 300 2024-T4
Introducing IDC SSL Connector
Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto
Copyright Black Box Corporation. All rights reserved.
Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 4-Post Steel Open Rack AUGUST 2008 RM7000A RM7001A RM7002 RM7003A RM7004A
BULLeTIN PeM CAPTIve PANeL SCReWS 617 Rev 1117
BULLTIN PF PM PTIV PNL SRWS 617 R e v 1117 PM PTIV PNL SRWS PM brand captive panel screws are designed to help keep parts to a minimum and eliminate risks associated with loose hardware that could fall
Apple iphone 8. PennEngineering
Apple iphone 8 March 2018 by Jon Brunk PennEngineering www.pemnet.com 1 Apple iphone 8 www.pemnet.com 2 Details & Findings Pictures and Description of the iphone 8 and our disassembly process. www.pemnet.com
BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
TN019. PCB Design Guidelines for 3x2.5 LGA Sensors Revised. Introduction. Package Marking
PCB Design Guidelines for 3x2.5 LGA Sensors Revised Introduction This technical note is intended to provide information about Kionix s 3 x 2.5 mm LGA packages and guidelines for developing PCB land pattern
METRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
TN008. PCB Design Guidelines for 2x2 LGA Sensors. Introduction. 2x2 LGA Package Marking
PCB Design Guidelines for 2x2 LGA Sensors Introduction This technical note is intended to provide information about Kionix s 2 x 2 mm LGA packages and guidelines for developing PCB land pattern layouts.
CONCEALED-HEAD SELF-CLINCHING STUDS AND STANDOFFS BULLETIN
ONEED-HED SEF-INHING SUDS ND SNDOFFS UEIN H 708 R E V. 409 ONEED-HED SUDS ND SNDOFFS hese studs and standoffs ensure permanent mounting in metal sheets as thin as in. / mm. he fastener head is locked securely
BLIND THREADED INSERTS CATALOG
BLIND THREADED INSERTS CATALOG 1114 Rev 315 INDEX Company Info and Capabilities 3-4 Atlas Blind ed Inserts and Studs Overview 5 SpinTite Blind ed Inserts Atlas Plus+Tite Blind ed Inserts Atlas MaxTite
TN016. PCB Design Guidelines for 5x5 DFN Sensors. Introduction. Package Marking
PCB Design Guidelines for 5x5 DFN Sensors Introduction This technical note is intended to provide information about Kionix s 5 x 5 mm DFN (non wettable flank, i.e. standard) packages and guidelines for
SW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
HEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
SELF-LOCKING FASTENERS BULLETIN
BULLETIN LN 44 Rev 64 PEM SELF-CLINCHING PREVAILING TORQUE LOCKNUTS PREVENT MATING HARWARE FROM LOOSENING PEM self-clinching prevailing torque locknuts provide ideal solutions to prevent mating hardware
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
TECH SHEET PEM - REF / AXIAL THREAD CLEARANCE. SUBJECT: Method for providing adequate axial thread clearance
SUBJECT: Method for providing adequate axial thread clearance In our long history of working with customers in the application of our self-clinching nuts, PennEngineering has seen numerous instances of
TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
SELF-CLINCHING TY-D CABLE TIE-MOUNTS BULLETIN
SELF-CLINCHING TY-D CABLE TIE-OUNTS BULLETIN TD 508 R E V. 809A SELF-CLINCHING CABLE TIE-OUNTS AND HOOS PE TY-D self-clinching tie-mounts and hooks provide secure attachment points for mounting wires to
Data Sheet. ACMD-6003 UMTS Band 3 Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-63 UMTS Band 3 Duplexer Data Sheet Description The Avago ACMD-63 is a highly miniaturized duplexer designed for use in UMTS Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data terminals.
ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage
SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS
38.500 SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS FEATURES: Wide temperature range (-55C to +155C ) xga IC High current capability (up to 4A ) Excellent signal integrity
ISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes
INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF
Surface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
WESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
SELF-CLINCHING STUDS AND PINS
SELF-LINING S ND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head
S ELF-CLINCHING N UTS. Revised 108
LF-LINHING N UT Revised 8 PM LF-LINHING NUT For load-bearing threads in thin sheets aluminum, steel, and other ductile materials. Proved Performance For over 6 years, PM brand self-clinching fasteners
These 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability.
RM7000A-R2 RM7003A-R2 RM7006 RM7001A-R2 RM7004A-R2 RM7007 RM7002 RM7005A-R2 RM7008A-R2 RM7010 4-Post Steel Open Racks These 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability. Hold up to 2200
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.29 V at I F = 5 A TMBS esmp Series 2 Anode Cathode Anode 2 PRIMARY CHARACTERISTICS I F(AV) 25 A V RRM 60 V I FSM
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products
INFASCO CAP SCREWS The Bolt of Choice for the Heavy Equipment Industry Infasco is the largest manufacturer of Grade 5 and Grade 8 Cap Screws in North America. They are accepted and used by all branches
EECO-Green SILVER-THROUGH-HOLE DOUBLE-SIDED PRINTED CIRCUIT BOARDS
EECO-Green SILVER-THROUGH-HOLE DOUBLE-SIDED PRINTED CIRCUIT BOARDS PRODUCT OVERVIEW DESIGN CONSIDERATIONS FAQ s 880 Columbia St. Brea, CA 92821 TEL: (714) 835-6000 FAX: (714) 482-9429 Web: www.eecoswitch.com
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.34 V at I F = 4 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 8.0 A V RRM
Data Sheet. ACPF-8040 Bandpass Filter for 3GPP Band 40. Features. Description. Functional Block Diagram. Specifications (Typ, 25 C) Applications
ACPF-84 Bandpass Filter for 3GPP Band 4 Data Sheet Description The Avago ACPF-84 is a miniaturized Bandpass Filter designed for use in 3GPP Band 4 wireless applications (23 24 MHz DL, 23 238 MHz UL). The
High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
V5PL50 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.8 V at I F = 5 A TMBS esmp Series Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 5 A V RRM 50 V I
SMD Photovoltaic Solar Cell Protection Rectifier
SMD Photovoltaic Solar Cell Protection Rectifier esmp Series 2 Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement Glass passivated pellet chip junction
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
NYLON INSERT SELF-LOCKING FASTENERS BULLETIN
BULLIN PL 510 ffective mounting for reusable locking threads. he thread locking torque performance of PL and PL PMHX self-clinching fasteners is equivalent to applicable NASM25027 specifications. A nylon
Initial release of document
This specification covers the requirements for application of SMT Poke In Connectors for use on printed circuit (pc) board based LED strip lighting typically used for sign lighting. The connector accommodates
Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
1N5908 SM5908. Transil. Features. Description. Complies with the following standards. Peak pulse power: Stand off voltage: 5 V Unidirectional
1N5908 SM5908 Transil Features Peak pulse power: 1500 W (10/1000 μs) Stand off voltage: 5 V Unidirectional A A Operating T jmax : 175 C High power capability at T jmax : 1500 W (10/1000 µs) JEDEC registered
PowerDI5 10 ± 1. PowerDI5
Mechanical Data Case: PowerDI 5 Case Material: Molded Plastic, Green Molding Compound. UL Flammability Classification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads. Solderable per MIL- STD-0, Method
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
Surface Mount Connectors
Surface Mount Connectors 3 As the industry s first surfacemountable connectors to be supplied on a continuous reel, our surface mount connectors are designed to be used as part of Zierick s Surf-Shooter
Surface Mount Power Voltage-Regulating Diodes
Surface Mount Power Voltage-Regulating Diodes DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Low Zener impedance Low regulation factor Meets MSL level, per J-STD-2, if maximum
SMD Photovoltaic Solar Cell Protection Schottky Rectifier
SS5P3S SMD Photovoltaic Solar Cell Protection Schottky Rectifier esmp Series Anode Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 5 A V RRM 30 V I FSM 80 A E AS 0 mj V F at I F = 5 A 0.4 V T J max. 50 C
SR2.8 - SR3.3. ultra low capacitance steering diode/tvs array. Description. applications
ultra low capacitance steering diode/tvs array Description The SR series offers two low voltage (2.8V & 3.3V) and low capacitance steering diode TVS arrays. This series is designed to protect two line
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Hexagon socket head cap screws Vis à tête cylindrique à six pans creux Reference number ISO 4762:2004(E) ISO 2004 PDF disclaimer This PDF file
SMD Photovoltaic Solar Cell Protection Schottky Rectifier
SSP4S SMD Photovoltaic Solar Cell Protection Schottky Rectifier PRIMARY CHARACTERISTICS I F(AV) A V RRM 40 V I FSM 80 A E AS 0 mj V F at I F = A 0.43 V T J max. 50 C Package Diode variations Single die
Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
QUICK PRODUCT LOCATOR
QUICK PRODUCT LOCATOR INDEX 313 R e v. 613 Self-clinching fasteners are pressed into sheet metal panels as this as.016 /0.4mm. Broaching fasteners are pressed into PC board or other plastic materials as
Surface Mount Glass Passivated Junction Rectifier
-xxx, GL4x Surface Mount Glass Passivated Junction Rectifier SUPERECTIFIER DO-23AB PRIMARY CHARACTERISTICS I F(AV).0 A V RRM (-xxx, GL4x) 50 V to 00 V, 50 V to 600 V I FSM 30 A I R μa E AS 5 mj V F. V,.2
Surf-Shooter SMT Surface Mount Connectors
New Product Technology Surf-Shooter SMT Surface Mount Connectors Zierick s surface mount terminals feature internal holes or slots at the base which foster a capillary solder wicking action for improved
Typical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.4 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
TQQ7399 DC 2700 MHz Through Line
Applications General Purpose Wireless RF Bypass Paths Microwave Radio Test & Measurement Scientific Instruments Product Features 6 Pin 3 x 3 mm leadless SMT Package Functional Block Diagram DC 2700 MHz
Silver Ball Matrix BGA Socket
A1 corner 4.600 Silver Ball Matrix BGA Socket Features Wide temperature range (-55C to +0C). Current capability is 4A per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact resistance
Mini Wideband Transformers WBC
Document - Mini Wideband Transformers WBC Smallest wideband transformer: mm square mm high Vrms interwinding isolation, / Watt RF input power ma max current rating. Designer s Kit C contains three of each
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
Standard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
MX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for