Decra Burj - essentials www. toiletcubicles.org

Size: px

Start display at page:

Download "Decra Burj - essentials www. toiletcubicles.org"

April Gregory
5 years ago
Views:

1 Page 1 - Burj in wood finishes Page 2 - Burj in plain colours Decra Burj - essentials www. toiletcubicles.org Page 3 - Burj ironmongery Page 4 - Burj hardwood edge options Pages 5-8 Burj elevations Page 9 - K32 spec and colours

For more details of the Decra Burj cubicle system call us on 020 8520 4371 or visit us at www.toiletcubicles.

faced with various options of wood veneers, Woodlam wood veneer laminates (melamine protected veneers) or conventional high pressure laminates and rebated hardwood edges.

Partitions are interfaced at floor and ceiling using extruded aluminium with laminate infill strip that can match the partition colour.

ensuring that the product maintains the high level of quality.

Burj is ideal for office environments, hotels, conference centres etc.

2 For more details of the Decra Burj cubicle system call us on or visit us at Fact file Decra Burj real wood veneers/woodgrain fascia Burj from Decra is a true full height flush fascia cubicle system with lightweight core doors and pilasters faced with various options of wood veneers, Woodlam wood veneer laminates (melamine protected veneers) or conventional high pressure laminates and rebated hardwood edges. Burj has proved to be the right product for todays economic climate providing traditional or contemporary styling for less cost than comparable 44mm joinery. Partitions are interfaced at floor and ceiling using extruded aluminium with laminate infill strip that can match the partition colour. Quality DDA compliant stainless steel ironmongery (see page 3) including lock (with emergency external access), sprung hinge, buffered coat hook are standard with Burj ensuring that the product maintains the high level of quality. Decra are chain of custody certified and can provide solutions for any BREEAM considerations using the Burj system. Burj is ideal for office environments, hotels, conference centres etc. Citibank woodgrain laminate fascia offices Lime Street London walnut veneer fascia Eagle House Ash veneer laminate Burj essentials page 1 Specification: doors/pilasters: 38mm lightweight particleboard faced with real wood veneers, real wood veneer laminates or woodgrain hpl laminates. Rebated heardwood edges (see page 4 for options) Partitions: 19mm o/a hpl laminate faced particleboard or jumbo stud (by m/c) Rear duct panels 19mm laminate or wood veneer faced core board Abbeygate House Reading - Woodlam walnut veneer fascia Oak veneer fascia Woodlam Walnut veneer

conventional plain colour laminate fascia as well as the look and feel of lacquered finishes with the use of glossy texture HR-LAC

ranges of colours are recommended due to the choice of colours and economical sheet sizes.

partitions are also required in gloss finish, Abet can provide a standard gloss finish in a partition sized width in matching

Doors and pilasters have rebated hardwood edges with a number of options including polished natural Ash (as standard) alternatively

It is worth noting that using the T10 range, Decra can provide a fully PEFC compliant specification for any BREEAM considerations.

gloss finish. Rebated hardwood edges in polished natural ash or paint/stain as near match to fascia laminate.

3 For more details of the Decra Burj cubicle system call us on or visit us at Fact file Decra Burj plain colour matt/glossy laminate fascia For a more contemporary appearance, Burj is also available with a conventional plain colour laminate fascia as well as the look and feel of lacquered finishes with the use of glossy texture HR-LAC high-pressure laminate from Italian laminate manufacturer Abet When matt finish plain colours are required the Decra T10 and S10 ranges of colours are recommended due to the choice of colours and economical sheet sizes. The gloss finish Abet HR-LAC is only suitable for doors, pilasters and rear duct panels due to a limited sheet width but if partitions are also required in gloss finish, Abet can provide a standard gloss finish in a partition sized width in matching colours to HR-LAC. Doors and pilasters have rebated hardwood edges with a number of options including polished natural Ash (as standard) alternatively the hardwood can be stained or painted to compliment the fascia colour (see page 4). It is worth noting that using the T10 range, Decra can provide a fully PEFC compliant specification for any BREEAM considerations. Burj essentials page 2 Specification: doors/pilasters: 38mm lightweight core board faced with highpressure laminate in matt or gloss finish. Rebated hardwood edges in polished natural ash or paint/stain as near match to fascia laminate. Partitions: 19mm o/a thickness laminate faced particleboard, or Jumbo stud (by m/c). Piccadilly Wholefoods Offices Farringdon Alea Casino Glasgow Decra T10 orange in gloss grey laminate fascia Abet 823 red HR-LAC Rear duct panels As partitions (19mm) Holborn Gate offices - Chancery Lane Decra Burj in white gloss laminate fascia Abet 879 HR-LAC Office W11 - white gloss Selfridges staff wc s T10 black

For more details of the Decra Burj cubicle system call us on 020 8520 4371 or

org Fact file Decra Burj ironmongery and ceiling/floor interface Burj essentials

alternative hinges) and the system includes a buffered stainless steel coat hook

75mm extruded aluminium sections provide the floor and ceiling interface with a

The infill strip can match the partition colour or form a contrast.

to fit flush with the partition (see image below) - contact Decra for more details.

4 For more details of the Decra Burj cubicle system call us on or visit us at Fact file Decra Burj ironmongery and ceiling/floor interface Burj essentials page 3 Quality German design stainless steel lock (emergency external access type) is standard with Burj. The DDA compliant thumb turn makes the lock easy to operate even with a partially clenched fist. Doors are supported on sprung stainless steel hinges (contact Decra to discuss alternative hinges) and the system includes a buffered stainless steel coat hook and a 450 x 25mm stainless steel pull handle for ambulant disabled cubicles. 75mm extruded aluminium sections provide the floor and ceiling interface with a laminate infil strip which hides all of the fixing screws. The infill strip can match the partition colour or form a contrast. We can also provide a thicker partition specification to allow aluminium section to fit flush with the partition (see image below) - contact Decra for more details. Specification: Lock, hinge, coast hook ambulant disabled pull handle:- all 304 grade stainless steel. Floor/ceiling interface: Extruded aluminium> Options: Thicker partitions to provide flush fitting interface. Bronzing effect coating for ironmongery (contact Decra for details). Flush fitting interface standard interface DDA compliant stainless steel lock and indicator (optional extra) with laminate infil sprung s/s hinge s/s pull handle buffered coat hook Burj s/steel indicator

For economy, Ash is our preferred option which is then polished to effectively seal the wood.

provide stain or paint finishes to compliment the fascia (this might be more beneficial for instance, when plain or glossy laminate fascia is specified in lieu of

we also provide oak hardwood when the fascia is Woodlam white oak or white oak veneer.

5 For more details of the Decra Burj cubicle system call us on or visit us at Fact file Decra Burj hardwood rebated edges - options In order to achieve the linear frontage, Burj has a rebated hardwood edge. For economy, Ash is our preferred option which is then polished to effectively seal the wood. We do respect however, that the light wood colour edge might not be ideal in all situations and therefore you can see from the examples below that we can also provide stain or paint finishes to compliment the fascia (this might be more beneficial for instance, when plain or glossy laminate fascia is specified in lieu of wood finishes. However, when a dark wood such as walnut veneer or walnut wood grain is specified we use real wood walnut to avoid a harsh contrast with the fascia. we also provide oak hardwood when the fascia is Woodlam white oak or white oak veneer. We can also provide timber edges such as maple or cherry which act as a better base wood when used with paint finishes as the paint effectively hides the grain of the wood. Burj essentials page 4 Specification: Burj door/pilaster rebated edges: polished Ash - standard when used with plain colours Walnut for dark wood grain fascias such as Woodlam Walnut and walnut woodgrains. Oak hardwood with oak veneer fascia. Options: 4 part paint finish for plain colours, glossy plain colours or stain and polish. Burj in grey gloss laminate with polished ash edge Light grey laminate with ash edge Woodlam walnut veneer with walnut edge white gloss fascia with painted edge White gloss fascia with ash edge stained walnut

9 Decra Burj with stud partitions example drawing

Indicative specification: Decra T10 premium colour range of plain colours, woodgrains and textures Decra S10 standard colour range K32: PANEL CUBICLES 120A Panel Cubicles - Type: full height

- Panels: Dividing - Height: full height to 2680mm max. - Floor clearance: none. - Core material: moisture resistant particleboard. - Thickness: 19mm.

- Panels: Pilasters and Doors - Height: Full height to 2680mm max> doors undercut by 25mm from floor and ceiling to allow air flow. - Floor clearance: none.

- Edge treatment: Walnut rebated hardwood edge or polished Ash. - Panels: Rear Ducts - Height: Full height to 2600mm max. - Floor clearance: to suit tiled skirting.

Abet HR-LAC is a high performance glossy finish hpl laminate range manufactured in a sheet size suitable for doors, pilasters and rear duct/urinal panels.

- Pedestals: none. - Accessories: - DDA compliant stainless steel lock and indicator with external emergency access. - Sprung stainless steel hinge. - Buffered stainless steel coat hook.

10 Indicative specification: Decra T10 premium colour range of plain colours, woodgrains and textures Decra S10 standard colour range K32: PANEL CUBICLES 120A Panel Cubicles - Type: full height to contractor design & CA approval of appearance. - Manufacturer: Decra Ltd - Product reference: Burj FH toilet cubicles. - Panels: Dividing - Height: full height to 2680mm max. - Floor clearance: none. - Core material: moisture resistant particleboard. - Thickness: 19mm. - Facings: high pressure laminate - Colour: plain colour from Decra cubicle size laminate ranges. - Panels: Pilasters and Doors - Height: Full height to 2680mm max> doors undercut by 25mm from floor and ceiling to allow air flow. - Floor clearance: none. - Core material: Lightweight particleboard - Thickness: 38mm. - Facings: Woodlam real wood range or high-pressure laminate. - Colour: To be confirmed. - Edge treatment: Walnut rebated hardwood edge or polished Ash. - Panels: Rear Ducts - Height: Full height to 2600mm max. - Floor clearance: to suit tiled skirting. - Core material: moisture resistant particleboard. - Thickness: 19mm. - Facings: Woodlam real wood range or high-pressure laminate. - Colour: To be confirmed. Abet HR-LAC is a high performance glossy finish hpl laminate range manufactured in a sheet size suitable for doors, pilasters and rear duct/urinal panels. When gloss is required for partitions Abet provide a standard gloss in partition widths. 460 HR-LAC 861 HR-LAC 421 HR-LAC - Fittings: Generally - Headrail none (see other requirements). - Pedestals: none. - Accessories: - DDA compliant stainless steel lock and indicator with external emergency access. - Sprung stainless steel hinge. - Buffered stainless steel coat hook mm stainless steel pull handle for ambulant disabled cubicles. - Other Requirements - Main contractor to provide minimum of 15mm plywood above ceiling finish. Note: in the case of metal grid type ceilings a continuous headrail is provided. 472 HR-LAC 405 HR-LAC 427 HR-LAC 860 HR-LAC 879 HR-LAC 410 HR-LAC 823 HR-LAC 467 HR-LAC 870 HR-LAC Black Walnut White Oak Maple Woodlam wood veneer examples - real wood veneers encased in melamine for durability (numerous other woods available). We also offer conventional wood veneers finished in A/C Lacquer.

Uniclass L2226. CI/SfB (22.3) X. July The New Minima

Uniclass L2226. CI/SfB (22.3) X. July The New Minima Uniclass L2226 CI/SfB July 2016 (22.3) X The New Minima Amwell Systems Ltd, July 2016 The New Minima Bringing Style and Flexibility Together Minima has always encompassed the very best of contemporary,