SOLID CARBIDE 600W. Ø mm 109,44 116,70 129,89 144,36 160,36 182,27 193,99 204,02 220,19 234,68 252,15 269,61 287,07 327,95 365,85

Size: px
Start display at page:

Download "SOLID CARBIDE 600W. Ø mm 109,44 116,70 129,89 144,36 160,36 182,27 193,99 204,02 220,19 234,68 252,15 269,61 287,07 327,95 365,85"

Transcription

1

2 524 Holesaws Pink Ref. 600W 80 EXTRA PROFESSIONAL SERIES PLUS SHANK CARBIDE TIPPED CORE BIT Plus These core bits are made of three parts that can be ordered separately: The core bit with the diameters shown below. Plus arbor with special round thread in different lengths. Centre pin. SOLID CARBIDE This tool is not suitable to drill metal, tile nor reinforced concrete. The core bit must be removed from the hols in rotary movement to avoid teeth damage When using long arbors it is necessary to pre-drill with a shorter arbor. 700 R.P.M. in haer mode 600W25C W29C W32C W35C W38C W45C W50C W55C W60C W65C W70C W75C W80C W90C W100C W * Price does not include arbor nor center pin. 109,44 116,70 129,89 144,36 160,36 182,27 193,99 204,02 220,19 234,68 252,15 269,61 287,07 327,95 365,85 HUGE INCREASE IN SAW RESISTANCE DUE TO EXTREMELY ROBUSTE SHANK Ref. 600W1105 Ref. 600W1200 Ref. 600W1300 Ref. 600W2105 Ref. 600W2200 Ref. 600W2300 Ref. 600WP ARBORS FOR EXTRA PROFESSIONAL CORE BITS 600W1105 Plus arbor W1200 Plus arbor W1300 Plus arbor W2105 Plus arbor W2200 Plus arbor W2300 Plus arbor WP0 Center pin WP1 Center pin WP2 Center pin ,64 36,68 43,55 33,16 48,90 64,48 41,90 41,90 41,90

3 525 EXTRA PROFESSIONAL SERIES PLUS SHANK CARBIDE TIPPED CORE BIT Ref. CW 95 Plus Max CARBIDE TIPPED Holesaws These core bits are made of three parts that can be ordered separately: The core bit with the diameters shown below. Plus arbor with special round thread in different lengths. Centre pin. This tool is not suitable to drill metal, tile nor reinforced concrete. When using long arbors it is necessary to pre-drill with a shorter arbor. Pink CW25 25 CW27 27 CW30 30 CW35 35 CW40 40 CW45 45 CW50 50 CW60 60 CW65 65 CW68 68 CW70 70 CW75 75 CW80 80 CW90 90 CW95 95 CW CW CW CW CW CW CW CW CW CW CW CW CW CW 50,51 51,21 58,77 64,84 74,89 86,58 96,24 109,28 131,51 139,50 143,34 154,08 168,44 174,49 202,46 222,93 238,49 263,59 293,25 293,25 334,62 385,11 402,23 457,86 497,23 539,16 618,31 658,98 HUGE INCREASE IN SAW RESISTANCE DUE TO EXTREMELY ROBUSTE SHANK * Price does not include arbor nor center pin. Ref. CW-105 Ref. CW-200 Ref. CWSMAX-105 Ref. CWSMAX-200 Ref. CWBR ARBORS FOR EXTRA PROFESSIONAL CORE BITS CW-105 Plus arbor CW-200 Plus arbor CW-300 Plus arbor CW-450 Plus arbor CWSMAX-200 Max arbor CWSMAX-300 Max arbor CWSMAX-450 Max arbor CWBR Pilot drill 10 x ,62 40,32 53,34 72,24 40,32 53,34 72,24 26,88

4 526 CARBIDE TIPPED CONSTRUCTION CORE BIT 11. HEXAGON AND PLUS SHANK Holesaws Pink Ref. HA 54 Plus CARBIDE TIPPED These core bits are made of three parts that can be ordered separately: The core bit with the diameters shown below. Arbors: Thread M16 x 2. Available PLUS and hexagonal shank. Pilot drill 8. This tool is not suitable to drill metal, tile nor reinforced concrete. When using long arbors it is necessary to pre-drill with a shorter arbor. 700 R.P.M. in haer mode 11 HEXAGONAL SHANK ARBORS HA HA HA HA HA HA HA HA HA HA HA Z 45,88 49,19 52,77 57,52 65,96 74,79 95,54 112,47 127,52 153,76 * Price does not include arbor nor pilot drill. HA11X78 HA11X220 HA11X370 Plus Short shank 78 Long shank 220 Extra long shank 370 PLUS SHANK ARBORS Drill chuck until 13 capacity 23,06 32,36 39,34 8 x 120 PILOT DRILL HA8X120 5,84 HA105 HA220 HA370 Short shank -PLUS 105 Long shank -PLUS 220 Extra long shank -PLUS ,65 37,02 44,01 HA CORE BITS DISPLAY ONE PIECE NO BREAKING PLUS SHANK PILOT DRILL Content: HA Core bits and arbors Plus HA11x370 HA HA HA8X120 HA Dimensions: width 330 x depth 360 x height ,22 HA175M HA340M HA440M Short shank -PLUS 175 Long shank -PLUS 340 Extra long. -PLUS ,49 81,52 95,37

5 527 HEXAGONAL & PLUS SHANK CARBIDE TIPPED LIGHT CONSTRUCTION CORE BIT Ref. MD 60 Plus CARBIDE TIPPED Holesaws These core bits are made of three parts that can be ordered separately: The core bit with the diameters shown below. Arbors: Thread M16 x 2. Available PLUS and hexagonal shank. Pilot drill 8. Pink This tool is not suitable to drill metal, tile nor reinforced concrete. When using long arbors it is necessary to pre-drill with a shorter arbor. 700 R.P.M. in haer mode 11 HEXAGONAL SHANK ARBORS MD MD22SH 22 MD25SH 25 MD27SH 27 MD30SH 30 MD35SH 35 MD40SH 40 MD45SH 45 MD50SH 50 MD60SH 60 MD65SH 65 MD68SH 68 MD70SH 70 MD75SH 75 MD80SH 80 MD90SH 90 MD95SH 95 MD100SH 100 MD120SH ,51 33,46 33,93 38,93 42,96 49,61 54,84 56,50 64,41 64,17 64,86 84,41 90,74 93,00 96,34 104,33 109,60 130,45 HA11X78 HA11X220 HA11X370 PLUS SHANK ARBORS Plus Short shank 78 Long shank 220 Extra long shank 370 Drill chuck until 13 capacity 23,06 32,36 39,34 * Price does not include arbor nor pilot drill. HA105 HA220 HA370 Short shank -PLUS 105 Long shank -PLUS 220 Extra long shank -PLUS ,65 37,02 44,01 8 x 120 PILOT DRILL ONE PIECE NO BREAKING PLUS SHANK PILOT DRILL Plus HA8X120 5,84 HA175M HA340M HA440M Short shank -PLUS 175 Long shank -PLUS 340 Extra long. -PLUS ,49 81,52 95,37

6 528 Holesaws Pink Ref. MH HEAVY DUTY CONSTRUCTION CORE BIT FOR REINFORCED CONCRETE MAX OR HEXAGONAL SHANK 100 Max CARBIDE TIPPED 500 Rpm in most applications. Light axial presure which must be reduced when we start cutting the rebar. Remove the center pin when the CORE BIT has penetrated into the concrete. Not suitable for metal or ceramic. Work in haer mode. 1- Use the center pin when star drilling. 2- We remove the center pin when the CORE BIT has penetrated slightly. MH MH MH MH MH MH MH MH MH MH MH MH MH MH MH MH MH Z MH 109,22 116,54 129,73 144,22 160,22 181,99 193,69 203,95 219,95 234,41 252,01 269,42 286,86 327,60 365,56 444,10 622,23 HUGE INCREASE IN SAW RESISTANCE DUE TO EXTREMELY ROBUSTE SHANK * Price does not include arbor nor center pin. ARBORS FOR EXTRA PROFESSIONAL CORE BITS Ref. MHSK1MAX Ref. MHCP MHSK1MAX -MAX arbor MHSK2MAX -MAX arbor MHCP0 Center pin Nº MHCP1 Center pin Nº MHCP2 Center pin Nº ,60 93,32 49,79 49,79 49,79

7 529 HEAVY DUTY CONSTRUCTION CARBIDE TIPPED CORE BIT THREADED ANTI-BREAKAGE SHANK Ref. HAR 80 Max CARBIDE TIPPED Holesaws These core bits are made of three parts that can be ordered separately: The core bit with the diameters shown below. Arbor in round thread: Available in MAX, Spline and hexagonal (19 and 13 ) HAR 11 pilot drill. This tool is not suitable to drill metal, tile nor reinforced concrete. The core bit must be removed from the hols in rotary movement to avoid teeth damage When long arbors are required it is necessary to pre-drill with a shorter arbor. Must be used with a cutting speed of 600RPM in haer mode. Pink HAR HAR HAR HAR HAR HAR HAR HAR HAR HAR 112,94 132,53 143,42 152,13 210,91 243,59 263,18 295,83 382,93 * Price includes pilot drill. -MAX SHANK ARBORS 13/19 HEXAGONAL SHANK ARBORS Max HARMAX200 HARMAX460 SPLINE SHANK ARBORS -MAX shank 200 -MAX shank ,09 72,00 HAR13X200 HAR13X460 HAR19X200 HAR19X460 Hexagonal shank Hexagonal shank Hexagonal shank Hexagonal shank ,09 72,00 61,09 72,00 The shank thread Ref. HAR is special. It is not compatible with other holesaws and can only be used with the ones showed in this page. 11x135 PILOT DRILL FOR HAR CORE BITS HAREST200 HAREST460 Spline 200 Spline ,09 HAR11X135 72,00 12,78

8 530 DIAMOND SEGMENTED CORE BIT FOR GRANITE AND MARBLE Holesaws Pink Ref. CSG 50 Remove the drill when the CORE BIT has already penetrated in the material. We recoend to use the GCD guide for holesaws. Remove diamond holesaw from the hole in rotary movement in order to avoid tip breakages. Must be used with water cooling. High power haer drills 600W. References RPM: 100 : 400 RPM 50 : 800 RPM 20 : 1300 RPM Exclusively in rotary mode, no haer. Arbors: Thread 1/2 x 14h. Available straight shank or PLUS CSG10 10 CSG12 12 CSG15 15 CSG18 18 CSG20 20 CSG22 22 CSG25 25 CSG27 27 CSG30 30 CSG32 32 CSG35 35 CSG40 40 CSG45 45 CSG50 50 CSG55 55 CSG60 60 CSG65 65 CSG70 70 CSG80 80 CSG90 90 CSG CSG 136,40 143,95 151,57 156,56 173,63 175,26 178,09 195,90 195,90 204,80 213,70 227,05 240,41 249,31 258,22 280,48 298,28 311,65 329,45 365,07 382,87 * Price includes straight shank arbor and pilot drill HOLESAW GUIDE 4,5 x 85 PILOT DRILL FOR DIAMOND HOLESAWS Capacity: 10 a 83 GCD 43,53 B4,5X85 19,65 CAN FOR WATER REFRIGERATION ARBORS FOR DIAMOND HOLESAWS Capacity: 1,1 l. GBP 9,27 CSGM CSGM- Straigth shank 52 PLUS shank100 23,15 48,54

9 531 DIAMOND HOLESAW FOR CONCRETE WITH REBARS WITH QUICK CHANGE POLY-CLIC Ref. CDH 150 Exclusively in rotary mode, no percussion. Must be used with water cooling. High speed ( R.P.M.). Remove the drill when the CORE BIT has already penetrated in the material. We recoend to use the GCD guide for holesaws. Remove diamond holesaw from the hole in rotary movement in order to avoid tip breakages. Holesaws Pink 1- Use Center pin to start drilling 2- We remove the center pin when the CORE BIT has penetrated slightly. CDH25 25 CDH29 29 CDH32 32 CDH35 35 CDH38 38 CDH45 45 CDH50 50 CDH55 55 CDH60 60 CDH65 65 CDH70 70 CDH75 75 CDH80 80 CDH90 90 CDH CDH CDH CDH CDH CDH CDH * Price does not include arbor nor center pin. 248,74 248,74 248,74 248,74 248,74 248,74 275,77 286,59 297,41 310,92 337,95 365,00 392,03 451,50 513,69 554,25 594,80 702,95 824, ,09 DRESSING PLATE ACCESSORIES DDP 87,26 CAN FOR COOLING Capacity: 1,1 l. GBP 9,27 CDHAPH Hexagonal shank short CDHAP PLUS short CDHAPH300 Hexagonal CDHAP300 PLUS CDHAGH Hexagonal shank short CDHAG PLUS corto CDHAGH300 Hexagonal CDHAG300 PLUS CDHBP centering pin ,36 270,36 283,89 283,89 310,92 310,92 337,95 337,95 37,85

10 532 ELECTRODEPOSITED DIAMOND HOLESAW FOR GRANITE, MARBLE, TILE Holesaws Grey Pink Ref. CDE 40 Remove the drill when the CORE BIT has already penetrated in the material. PVC We recoed to use the GCD guide for holesaws. Remove diamond holesaw from the hole in rotary movement in order to avoid tip breaking. Must be used with water cooling. References RPM: 100: 400 RPM 50: 800 RPM 20: 1300 RPM Exclusively in rotary mode, no haer. CDE CDE12 12 CDE14 14 CDE16 16 CDE18 18 CDE20 20 CDE25 25 CDE28 28 CDE30 30 CDE32 32 CDE35 35 CDE40 40 CDE43 43 CDE45 45 CDE50 50 CDE65 65 CDE68 68 CDE75 75 CDE80 80 CDE90 90 CDE CDE ,59 46,03 48,65 51,27 58,12 64,40 66,86 70,91 74,27 77,54 81,13 82,13 82,55 82,79 97,75 109,83 134,41 142,02 160,88 160,88 188,79 PILOT DRILL 5 BW ,57 * Price includes arbor and pilot drill HOLESAWS GUIDE Capacity: CAN FOR COOLING GCD GBP 43,53 Capacity: 1,1 l. 9,27

11 533 CSE DIAMOND HOLESAWS FOR GRANITE, MARBLE AND HARD CERAMICS Ref. CSE 40 PVC Holesaws Serie Diamond For dry drilling M14x2 CSE05* 5 CSE06* 6 CSE08* 8 CSE10* 10 CSE12* 12 CSE14* 14 CSE16 16 CSE18 18 CSE20 20 CSE22 22 CSE25 25 CSE27 27 CSE30 30 CSE32 32 CSE35 35 CSE38 38 CSE40 40 CSE45 45 CSE50 50 CSE51 51 CSE55 55 CSE57 57 CSE60 60 CSE65 65 CSE67 67 CSE68 68 CSE70 70 CSE75 75 CSE80 80 CSE83 83 CSE 45,01 45,14 45,51 46,02 46,96 47,41 50,11 52,81 59,86 62,31 66,33 68,68 73,04 76,50 79,87 81,25 83,56 85,02 85,28 88,52 90,21 95,25 98,32 100,68 108,25 113,13 124,00 138,44 146,28 165,31 Grey Pink Theses prices doesn t include the arbor Female thread M14x2 on the back side to be fixed on an angle grinder These Holesaws may work ceramics without water. Nevertheless, using water increases dramatically the performance Start drilling with an angle between 15 and 30º and afterwards horizontally. No need to guide Drill the creamics making soft rotary movements Remove the core after each operation HEX ARBOR FOR CSE OPTIONAL PILOT DRILL FOR ARBOR REF. ADCSE 4,2 ADCSE BW ,32 23,57

12 534 Grit GRIT EDGE HOLE SAW FOR NON METALLIC MATERIALS Holesaws Pink Ref. MG 30 Tungsten VERY CLEAN FINISHING Ideal for use in agglomerate and wood Carton Blister Ref. Ref. 16 MG16 17,43 MG16B 17,43 19 MG19 18,30 MG19B 18,30 20 MG20 18,77 MG20B 18,77 22 MG22 18,77 MG22B 18,77 25 MG25 19,19 MG25B 19,19 29 MG29 19,60 MG29B 19,60 32 MG32 19,86 MG32B 19,86 35 MG35 20,55 MG35B 20,55 38 MG38 22,42 MG38B 22,42 44 MG44 23,96 MG44B 23,96 48 MG48 24,44 MG48B 24,44 51 MG51 24,44 MG51B 24,44 54 MG54 25,49 MG54B 25,49 57 MG57 25,60 MG57B 25,60 60 MG60 27,39 MG60B 27,39 64 MG64 27,39 MG64B 27,39 70 MG70 34,87 MG70B 34,87 76 MG76 37,41 MG76B 37,41 83 MG83 38,20 MG83B 38,20 86 MG86 40,13 95 MG95 42, MG102 43, MG114 44,70 ARBORS FOR Ref.GO HOLE SAWS B5519-CM B5546-CM B5519-CMS B5546-CMS CARBIDE TIPPED PILOT DRILLS 6,35 B8537 B8538 B8537S B8538S LT PACKAGING PACKAGING Box Box Blister Blister Box Box Blister Blister 16,39 24,86 16,39 24,86 4,50 4,50 4,64 4,64 * Price does not include arbor nor pilot drill. MASTER-GRIT HOLESAWS BOXES Content: 6 Holesaws: Arbors Ref Ref Tungsten carbide drills HLS9392 HLS9393 HLS9396 Content: Content: 6 Holesaws: Arbors Ref Ref Tungsten carbide drills 9 Holesaws: Arbors Ref. B5546-CM - Ref. B5519-CM 1 Tungsten carbide drill 239,79 244,64 321,68

13 535 HIGH PERFORMANCE CARBIDE TIPPED HOLESAW FOR WOOD Ref. CM 60 SOLID CARBIDE PVC Holesaws High cutting speed. Great lateral chip evaluation. Long life even in abrasive material. Optimal hole finishing. Exclusively in rotary mode, no haer. Pink CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM CM 24,70 26,72 27,96 30,71 33,36 33,36 39,99 39,99 43,38 47,31 49,77 54,18 61,02 61,02 67,21 69,67 79,64 79,64 87,79 98,33 98,33 115,66 138,01 * Price includes arbor and pilot drill SPEED R.P.M ARBORS FOR WOOD HOLE SAWS Ref. B5519 Ref. B5546 Ref. B5556 PILOT DRILL 6,35 x 83 B5519 B5529 B5546 B5556 Straight shank Straight shank PLUS shank PLUS shank 14,12 18,76 22,40 34,74 B8534 5,24

14 536 CIRCLE HOLE CUTTERS Holesaws Pink 163 y 200 DRYWALL CAST Multipurpose circle cutting hole cutters with adjustable blade. To cut large circles in ceilings, walls, and floors. Chip holding system to allow clean work. Works in aluminium, brass and metal up to 1 thick. Minimum cutting diameter: 40 CIRCLE HOLE CUTTERS 163 TB ,34 CIRCLE HOLE CUTTERS 200 TB ,66 (4) Cutter SPARE PARTS (1) Drill (2) Upright axle (3) Traverse axle CL TB2 TB3 TB3BIS CL12HSS CL12WID TB5 TB6 CL7 TB10 TB13A TB13B TB16 TB17 TB18AA TB18BA TB18CA TB18DA JB163 TB18AB TB18BB TB18CB TB18DB JB200 CL4 CL9 Pilot drill 163 / 200 Upright axle 163 / 200 Traverse axle for circle cutting hole cutter 200 Traverse axle for circle cutting hole cutter 163 Cutter HSS 163 / 200 Carbide cutter 163 / 20 Fixed disk 163 / 200 Fixed adjusting disk 163 / 200 Adjusting rod 163 / 200 Bearing 163 / 200 Complete cowl 163 Complete cowl 200 Compression spring 163 / 200 Hexagon nut 163 / Balance bar for YA Balance bar for YA Balance bar for YA Balance bar for YA-163 Balance bar set for Balance bar for YA Balance bar for YA Balance bar for YA Balance bar for YA-200 Balance bar set for 200 Hex allen key 163 / 200 Adjustable flat wrench 163 / ,25 49,50 26,52 24,90 17,08 22,39 12,47 12,47 4,32 16,17 126,45 139,77 2,63 6,24 4,76 4,76 4,76 4,76 19,90 5,26 5,26 5,26 5,26 22,00 2,17 6,39 (6) Fixed adjusting disk (11) Bearing fixed plate (10) Bearing (13) Complete cowl (5) Fixed disk (7) Adjusting rod (12) Screw (8) Gasket (9) Support (14) L type 3 Hex key

15 537 CIRCLE HOLE CUTTERS 220 y 285 DRYWALL CAST Holesaws Multipurpose circle cutting hole cutters with adjustable blade. Pink To cut large circles in ceilings, walls, and floors. Chip holding system to allow clean work. Works in aluminium, brass and metal up to 1 thick. Minimum cutting diameter: 40 CIRCLE HOLE CUTTERS 220 CL ,08 CIRCLE HOLE CUTTERS 285 CL ,59 (1) Hexagonal Nut SPARE PARTS (2) Compression spring CL1 CL2 CL3-220 CL3-285 CL4 CL5 CL6 CL7 CL8-220 CL8-285 CL9 CL10A CL10B CL10C CL10D-220 CL10D-285 CL10E CL10F CL CL CL12 HSS CL12 WID CL CL CL14 Hexagonal nut 220 / 285 Compression spring 220 / 285 Cowl with bearing 220 Cowl with bearing 285 Allen key 220/285 (3 ) Fixed plate 220 / 285 Adjusting plate 220 / 285 Adjusting rod 220 / 285 Vertical axle 220 Vertical axle 285 Flat key 220 / 285 Balance F/CL220-CL285 of 33. Balance F/CL220-CL285 of 40. Balance F/CL220-CL285 of 56. Balance F/CL220 of 74. Balance F/CL285 of 74. Balance F/CL285 of 95. Balance F/CL285 of 120. Transversal axle for 220 Transversal axle for 285 HSS cutter for 220/285 Widia cutter 220/285 Pilot drill CL220 Pilot drill CL285 Widia pilot drill CL285 7,67 2,16 76,67 114,15 2,17 14,93 6,39 4,32 34,10 36,25 6,39 3,08 3,49 4,05 4,32 4,32 5,58 7,40 14,93 21,06 17,08 22,39 14,25 14,73 16,15 (4) Allen key 3 (5) Fixed plate (6) Adjusting plate (9) Flat key (10) Balance set (13) Drill (3) Cowl for bearing (7) Adjusting rod (8) Vertical axle (11) Traverse axle (12) Cutter

16 538 CIRCLE HOLE CUTTERS Holesaws Pink 410 For bigger diameters. DRYWALL CAST High resistant carbide tip with innovative geometry. Better hole finishing. The spare parts of holesaws 163, 200, 220 & 285 are valid for CL410 with exception of balances CL10G and CL10H. CIRCLE HOLE CUTTERS 410 CL ,77 SPARE PARTS CL1 CL2 CL3-220 CL3-285 CL4 CL5 CL6 CL7 CL8-220 CL8-285 CL9 CL10A CL10B CL10C CL10D-220 CL10D-285 CL10E CL10F CL10G CL10H CL CL CL12 HSS CL12 WID CL CL CL14 CL Hexagonal nut 220 / 285 Compression spring 220 / 285 Cowl with bearing 220 Cowl with bearing 285 Allen key 220/285 (3 ) Fixed plate 220 / 285 Adjusting plate 220 / 285 Balance bar set for 200 Vertical axle 220 Vertical axle 285 Flat key 220 / 285 Balance F/CL220-CL285 of 33. Balance F/CL220-CL285 of 40. Balance F/CL220-CL285 of 56. Balance F/CL220 of 74. Balance F/CL285 of 74. Balance F/CL285 of 95. Balance F/CL285 of 120. Balance F/CL410 of 145. Balance F/CL410 of 175. Transversal axle for 220 Transversal axle for 285 HSS cutter for 220/285 Widia cutter 220/285 Pilot drill CL220 Pilot drill CL285 Widia pilot drill CL285 New circles cutting hole saw 410 7,67 2,16 76,67 114,15 2,17 14,93 6,39 4,32 34,10 36,25 6,39 3,08 3,49 4,05 4,32 4,32 5,58 7,40 9,15 11,58 14,93 21,06 17,08 22,39 14,25 14,73 16,15 30,56

MASONRY DRILL and CHISEL

MASONRY DRILL and CHISEL MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content

More information

PERCUSSION DRILL BITS

PERCUSSION DRILL BITS Universal drill bit GOLCRAFT 44 SS-plus MS5 universal drill bit GOLCRAFT 46 Tile/brick drill bit KERAMIK 47 Tile drill bit / KERAMIK diamond - dry drill 49 Glass drill bit 51 Glass drill bit KEILBIT 52

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy

More information

Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble.

Concrete drills 2.0. SDS-plus hammer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. » CONCRETE DRILLS Concrete drills SDS-plus haer drills Applications: for drilling in granite, concrete, clinker, stone, masonry, tiles and marble. SDS-plus haer drills with 4 cutters Applications: for

More information

S E R I E S C ATA L O G U E

S E R I E S C ATA L O G U E SERIES CATALOGUE Safety Precautions WARNINGS Wear working clothes suitable for the operation. In particular, eye protection equipment must be worn to prevent shavings from getting into your eyes. Prepare

More information

16 Piece Twister Drilling Set.

16 Piece Twister Drilling Set. 16 Piece Twister Drilling Set. TECHNICAL REFERENCE GUIDE Drill. With Impact. Not all ¼ shank accessories can withstand the higher torque produced by an impact driver. Our 16 Piece Twister Drilling Set

More information

Drill Bits & Hole Saws

Drill Bits & Hole Saws F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill

More information

MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS

MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS Triple Edge Cutting Features: The CT series features two sets of three cutting tips each with different geometries, balancing and cutting forces. This enables

More information

Concrete drills 324 PRECISION TOOLS

Concrete drills 324 PRECISION TOOLS BETONBOHRER CONCRETE FORETS BETONBOREN PUNTE BROCAS VRTÁKY WIERTŁA СВЁРЛА BURGHIE UDARNI SVRDLA BETONFÚRÓK BETONO PER MATKAP SVEDRI À ZA ПО PARA GRĄŽTAI DO PENTRU BÉTON DRILLS MURO БЕТОНУ BETONU HORMIGÓN

More information

Masonry & Specialty Drilling

Masonry & Specialty Drilling Masonry & Specialty Drilling www.irwin.com SDS-Plus POWERS THROUGH REBAR With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products

More information

SYMBOL INDEX HSS V3. Special heat treatment. HSS-Co 8% CARBIDE. Powder Steel High performance ASP 23 BI/CV. GOLD Gold finish HARD LUBE

SYMBOL INDEX HSS V3. Special heat treatment. HSS-Co 8% CARBIDE. Powder Steel High performance ASP 23 BI/CV. GOLD Gold finish HARD LUBE 526 Technical Information GENERAL ICONS DIN DIN Norm TOL Tolerance Standard quality Professional quality Extra porfessional quality Supreme quality MATERIALS High speed steel M2 quality G High speed steel

More information

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets

Masonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216

More information

Holemaking Products & Accessories

Holemaking Products & Accessories Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get

More information

53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.

53932 Wood Boring Bit, 78 Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories. 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)

More information

PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES

PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES PUNK / 1 POWER TOOL ACCESSORIES 2015/16 - LIST PRICES PUNK- HIGH PERFORMANCE POWER TOOL ACCESSORIES. DESIGNED FOR THE SERIOUS PROFESSIONAL. Demand more from your power tool accessories. QUALITY Super durable

More information

SAMSON. Industrial. Quality Products...Excellent Service

SAMSON. Industrial. Quality Products...Excellent Service Quality Products...Excellent Service WET DIAMOND Premium Black Our Premium Black bit is the industry standard. Its very high diamond concentration gives maximum footage and drilling speed. Designed for

More information

KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"

KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8 Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product

More information

POWER TOOL ACCESSORY GUIDE

POWER TOOL ACCESSORY GUIDE POWER TOOL ACCESSORY GUIDE TABLE OF CONTENTS METAL SAWZALL BLADES 3 WOOD SAWZALL BLADES & HACKZALL BLADES & BLADE KITS 4 SPECIALTY SAWZALL BLADES 5 HOLE SAWS & HOLE SAW KITS 6 SPECIALTY HOLE SAWS 7 THIN

More information

Protective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16

Protective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16 Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.

More information

Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer

Blower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.

More information

STAR TOOL SUPPLY / GRAND TOOL SUPPLY

STAR TOOL SUPPLY / GRAND TOOL SUPPLY Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel

More information

HEAVY DUTY BENCH GRINDERS

HEAVY DUTY BENCH GRINDERS HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

MILWAUKEE TOOLS

MILWAUKEE TOOLS INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...

More information

Innovative Cutting Tool Solutions. Product Line Card

Innovative Cutting Tool Solutions. Product Line Card Innovative Cutting Tool Solutions Product Line Card www.championcuttingtool.com Product Lines Cutting Tool Solutions Jobber XL5 Heavy Duty Sizes - 1/16 to 1/2, Letters & Numbers Stainless steel & tough

More information

Fast and flexible use Powerful results

Fast and flexible use Powerful results Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete

More information

Masonry Drill Bits

Masonry Drill Bits www.irwin.com Masonry Drill Bits Powers Through Rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products available, IRWIN

More information

POWER TOOL ACCESSORIES

POWER TOOL ACCESSORIES POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and

More information

Carbide Tipped Hole Cutters

Carbide Tipped Hole Cutters Carbide Tipped Hole Cutters The solution for drilling holes in sheet metal up to /8 thick Deliver more holes per charge in battery-powered drills Cut thin materials, including stainless steel, quickly

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

Masonry & Specialty Drilling

Masonry & Specialty Drilling www.irwin.com Masonry & Specialty Drilling SDS-Plus SPEEDHAMMER POWER FEATURES Powers Through rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development,

More information

1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s

1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s 1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s H o l e S a w s Starrett HellermannTyton, aware of the needs of the professional user, presents a range of Starrett hole saws. Starrett bi-metal

More information

HAMMER chisels & breaker steels

HAMMER chisels & breaker steels 83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC

More information

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS. Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped

More information

THE HARDEST GANG IN TOWN.

THE HARDEST GANG IN TOWN. HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is

More information

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP

Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292

More information

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand

HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018

More information

Catalog Drilling & Tapping Consumables

Catalog Drilling & Tapping Consumables Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users

More information

Cutting, Grinding and Abrasive Accessories

Cutting, Grinding and Abrasive Accessories High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

TITAN-BIT KEY-CUTTING MACHINE INSTRUCTION MANUAL

TITAN-BIT KEY-CUTTING MACHINE INSTRUCTION MANUAL TITAN-BIT KEY-CUTTING MACHINE INSTRUCTION MANUAL Contents: 1 PRESENTATION AND GENERAL ASPECTS... 3 1.1 GENERAL POINTS... 3 1.2 TRANSPORT AND PACKING... 3 1.3 IDENTIFICATION LABEL... 3 2 CHARACTERISTICS

More information

BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS

BY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:

More information

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column

HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table

More information

chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels

chisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels 107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING

More information

Complete line of Holemaking Products and Accessories

Complete line of Holemaking Products and Accessories Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant

More information

Dual Pitch Professional Bi-Metal Hole Saws

Dual Pitch Professional Bi-Metal Hole Saws Promo 2012.4 Dual Pitch Professional Bi-Metal Hole Saws Hardened, heat resistant, positive rake HSS teeth with alloy backing Strong and shatter resistant Economically cuts wood, metal and steel For hand

More information

Sima Diamant has inaugurated its new European factory of diamond blades, equipped with stateof-the-art technology on all its manufacturing processes and with the philosophy of producing diamond tools able

More information

BBM 911. Dry drilling machine up to Ø 160 mm. hand guided. Versatile dry drilling machine for drilling up to Ø 160 mm

BBM 911. Dry drilling machine up to Ø 160 mm. hand guided. Versatile dry drilling machine for drilling up to Ø 160 mm Dry drilling machine up to Ø 160 mm BBM 911 hand guided ADVANTAGES Sudden stop safety clutch Solid made housing, powder-coated die-cast aluminium for durability Versatile dry drilling machine for drilling

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits

Catalog 2014/2015. The Perfect 10! Rated the #1 Overall Router Bits Catalog 2014/2015 aw blades & knives s pare parts WOOD CHOICE R O U T E R Magazine The Perfect 10! Rated the #1 Overall Router Bits B I T Welcome to the 2014/2015 catalog Dear customer, Thank you for your

More information

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34. MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines

More information

HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand

HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special

More information

Jet-trac triplo Drill Bit, SDS-Plus, 3-cutter

Jet-trac triplo Drill Bit, SDS-Plus, 3-cutter Jet-trac triplo Drill Bit, SDS-Plus, 3-cutter HOBSON prefix: MUDJTTPR JET-TRAC TRIPLO DRILL BIT DRILL BIT, SDS-PLUS, 3-CUTTER Working MUDJTTPR0 0 5 0 00 MUDJTTPR005 005 0 MUDJTTPR00 00 0 00 MUDJTTPR05

More information

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS

ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two

More information

Customer Satisfaction. Customer. Effectiveness & Efficiency. Brighter future. India

Customer Satisfaction. Customer. Effectiveness & Efficiency. Brighter future. India Customer Satisfaction Customer Brighter future Effectiveness & Efficiency TM India O O Pistol Design SDS Plus Rotary Hammers Rotary Drills PFH 24 E PFH 26 PH 26 PH 27 PH 28 max 24 mm 2 mode Rotary Hammer

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

CNC EXPANDING MANDRELS

CNC EXPANDING MANDRELS CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate

More information

ECONO QUALITY A value quality, entry level grade blade for the extremely cost conscious user Provides good cutting performance at low initial cost Ideal for first time and occasional users PREMIUM QUALITY

More information

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials

ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.

More information

Holesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm

Holesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw

More information

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure. MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand

More information

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500

SAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500 SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy

More information

Core drilling technology catalogue

Core drilling technology catalogue Core drilling technology catalogue ruko Core drilling machines PreMiUMlineMline RS125e RS126e RS140e RSH1300 BASiCline RS5e RS10 RS25e RS40e A10 RS125e 2 overview of symbols Magnetic clamping force length

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing

Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping

More information

Drilling & Tapping Wide selection from a single source. Durable designs.

Drilling & Tapping Wide selection from a single source. Durable designs. Drilling & Tapping Wide selection from a single source. Durable designs. Type No. of Models Nom. Size (in.) Page Hole Cutting Model HC300 3 Up to 3" 6.2 Model HC450 3 Up to 4 3 4" 6.3 Hole Saws 51 Up to

More information

tool Accessory Catalogue 2011

tool Accessory Catalogue 2011 tool Accessory Catalogue 2011 NEW Hand Tools Also Inside Saint John Moncton Dartmouth Halifax Sydney 331 Chelsey Dr. 320 Edlinburgh Dr. Akerley Blvd. 3630 Strawberry Hill 397 George St. Toll Free: 1-888-846-7637

More information

Durham Woodworking Club. January 25, 2016

Durham Woodworking Club. January 25, 2016 Durham Woodworking Club January 25, 2016 The drill press has primarily been a metal working machine since its first incarnation. The purpose of the modern day drill press has been to provide woodworkers

More information

RECOMMENED TOOLS FOR MACHINING COUNTERTOPS

RECOMMENED TOOLS FOR MACHINING COUNTERTOPS Fabrication Manual RECOMMENED TOOLS FOR MACHINING COUNTERTOPS 1. Blades a) Segmented blade for porcelain. 4. Polishing Discs a) Silicon Carbide velcro discs for dry use. Grit 60, 120, 220, 400. 2. Grinding

More information

IPS ROCK BITS CATALOG

IPS ROCK BITS CATALOG IPS ROCK BITS CATALOG 2016-2017 Bearing series Content Features of Bearing Series Baleros series X - (Sellado journal, ¾ a 17 ½ ) Baleros series M - (Sellado journal:motor de Fondo, ¾ a 15 ½ ) Baleros

More information

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74

Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74 Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS

Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini

More information

HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm

HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm HM-32 - Mill Drill - Belt Drive (X) 540mm (Y) 190mm (Z) 410mm On Sale Ex GST Inc GST $1,850.00 $1,690.00 $2,035.00 $1,859.00 ORDER CODE: M121 MODEL: Digital Readout: HM-32 Optional Type: Vertical Table

More information

Masterpiuma3 Glass &Tile Cutters:

Masterpiuma3 Glass &Tile Cutters: Masterpiuma3 Glass &s: 2414 Converse Street Dallas, Tx 75207 T: 972-386-4900 F: 214-447-9581 Conceptsurfaces.com Lead Time: 1-2 Weeks/ Free Shipping for orders of $1,500 or more. 44P3 17-1/4 Can cut all

More information

ROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department

ROOP LAL Unit-6 Drilling & Boring Mechanical Engineering Department Lecture 4 Notes : Drilling Basic Mechanical Engineering ( Part B ) 1 Introduction: The process of drilling means making a hole in a solid metal piece by using a rotating tool called drill. In the olden

More information

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

ACCESSORIES CATALOG.  SKODA LIVE CENTERS BORING AND FACING HEADS ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through

More information

Special Tools And Modified Standards. Some examples of specials and their uses

Special Tools And Modified Standards. Some examples of specials and their uses Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.

More information

SBD-25A - Bench Drill 20mm Drill Capacity 2MT

SBD-25A - Bench Drill 20mm Drill Capacity 2MT SBD-25A - Bench Drill 20mm Drill Capacity 2MT ORDER CODE: D144 MODEL: SBD-25A Type - Bench / Pedestal : Bench Duty Type: Heavy-Duty Drill Capacity (mm): 20 Spindle Taper (MT): 2 Spindle Travel (mm): 80

More information

Installation Instructions

Installation Instructions TS SERIES Traditional Square Accessories Installation Instructions " TOWEL BAR.0 " TOWEL BAR.0.90 DOUBLE ROBE HOOK.0.0 " HANDLE. " HANDLE.0 Thank you for selecting American-Standard...the benchmark To

More information

Salter Industries Spiral Stair

Salter Industries Spiral Stair Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",

More information

Job no. 5241_Accessories Brochure_Size: 8.2 x 8.2 _ KOHLER Genuine Accessories

Job no. 5241_Accessories Brochure_Size: 8.2 x 8.2 _ KOHLER Genuine Accessories KOHLER Genuine Accessories CHOOSING THE PERFECT WALL-HUNG TOILET FOR YOUR BATHROOM IS N0T ENOUGH. KOHLER presents a range of accessories to enhace your bathroom experience. INSTAFIT+ Specially designed

More information

Professional Power Tools & Accessories

Professional Power Tools & Accessories Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm

More information

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department

ROOP LAL Unit-6 (Milling) Mechanical Engineering Department Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery

More information

Spiral gypsum plasterboard fixing

Spiral gypsum plasterboard fixing Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per

More information

PRODUCT INFORMATION 0.145/0.130" 100 5,

PRODUCT INFORMATION 0.145/0.130 100 5, PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.

More information

CLASS # 15 ACE DIAMOND BLADES

CLASS # 15 ACE DIAMOND BLADES CLASS # 15 ACE DIAMOND BLADES These blades are manufactured exclusively for Ace Industrial Supply and are available in a wide variety of applications under our own Ace Viper and Eagle Cut brands. They

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

WET diamond core drills

WET diamond core drills 73 WET diamond core drills DRY DIAMOND CORE wet core drills DRILLS INTRO WET diamond cores / drills / rigs wet core drill accessories core drill core drill rig core drill rig accessories BRICK / BLOCK

More information

MINI-LATHE QUICK CHANGE TOOL POST

MINI-LATHE QUICK CHANGE TOOL POST MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here

More information

Lathe Accessories. Work-holding, -supporting, and driving devices

Lathe Accessories. Work-holding, -supporting, and driving devices 46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding

More information

Cutting, Drilling and Beveling

Cutting, Drilling and Beveling Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized

More information

Cutting Tools DRILLS TO 16 TAPS & DIES TO 10 SAW BLADES & CUTTERS TO 10 FILES TO 4 MISC CUTTING TOOLS TO 8

Cutting Tools DRILLS TO 16 TAPS & DIES TO 10 SAW BLADES & CUTTERS TO 10 FILES TO 4 MISC CUTTING TOOLS TO 8 CUTTING TOOLS Cutting Tools SECTION PAGE NO. DRILLS -1-1 TO 1 TAPS & DIES -2-1 TO 10 SAW BLADES & CUTTERS -3-1 TO 10 FILES -4-1 TO 4 MISC CUTTING TOOLS -5-1 TO 8 TABLE OF CONTENTS 1 DRILLS DRILL DECIMAL

More information

STANDARD 3-PIECE CULTURED MARBLE PANEL INSTALLATION GUIDE

STANDARD 3-PIECE CULTURED MARBLE PANEL INSTALLATION GUIDE STANDARD -PIECE CULTURED MARBLE PANEL This installation guide applies to all standard -piece panel systems extending to the ceiling where each wall is manufactured in one piece. PH 70.59.55 F 70.59.559

More information

UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle

UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this

More information

Machining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba

Machining Processes Used to Produce Various Shapes. Dr. Mohammad Abuhaiba Machining Processes Used to Produce Various Shapes 1 Homework Assignment Due Wensday 28/4/2010 1. Show that the distance lc in slab milling is approximately equal to for situations where D>>d. (see Figure

More information