KC Woodworkers Guild and KC Woodturners Association Auction 2016 Donations 11/1/ items so far

Size: px
Start display at page:

Download "KC Woodworkers Guild and KC Woodturners Association Auction 2016 Donations 11/1/ items so far"

Transcription

1 KC Woodworkers Guild and KC Woodturners Association Auction 2016 Donations 11/1/ items so far Wood Art Lot No. Category Description Photo1 Click Link for Large Photo 1 Photo2 Click Link for Large Photo 2 21 Woodturning Title: Desert Snowstorm. Made from cherry, curly maple and walnut. 9" diameter x 6-1/4" tall. Donated and signed by the artist Kevin Neelley. org/auction/donations/bow l0844c.jpg org/auction/donations/bow l0844a.jpg 56 Woodturning Natural Edge Winged Bowl with Stand by Rudi Lopez, professional woodturner. 6" to 7" wide x 1-1/4" tall. Donated and signed by the artist Rudi Lopez. _1865.JPG _1734.JPG _1866.JPG 57 Woodturning Twice Turned Bowl with Decorated Rim by Rudi Lopez, professional woodturner. 6" wide x 3" tall. Donated and signed by the artist Rudi Lopez. 64 Woodturning Ebony ring box. 3" diameter x 4" tall. Donated by the artist Mike Erickson. _1867.JPG org/auction/donations/eric kson1.jpg _1868.JPG org/auction/donations/eric kson2.jpg 83 Woodturning Maple and Ebony Basket Illusion tree ornament. Donated and signed by the artist Rick Bywater. _1810.JPG _1812.JPG 140 Woodturning Maple square-edged goblet. 3-1/2" diameter x 7-1/4" tall. Donated and signed by the artist Shaun McMahon. G_1932.JPG G_1931.JPG 144 Woodturning Pair of tulipwood and ebony stemmed crystal goblets. Donated and signrd by artist Kevin Neelley. G_1936.JPG G_1937.JPG Woodworking and Accessories

2 Lot No. Category Description Photo1 Click Link for Large Photo 1 1 Electric Accessory Dremel Accessory. Right angle attachment. Unused on card. _1734.JPG Photo2 Click Link for Large Photo 2 2 Electric Accessory Dremel Accessory. Foot pedal speed control. Unused _1736.JPG 3 Electric Accessory Dremel Accessory. Router attachment. Unused in box. _1731.JPG 4 Electric Accessory Dremel Accessory. Router/Shaper table. Unused in box. _1724.JPG 5 Electric Vermont American router table with Craftsman 1 HP router attached. Used working _1717.JPG _1719.JPG 6 Electric Little Wizard II metal detector. Unused working _1721.JPG 7 Electric Porter Cable Model 342 1/4 sheet sander. Unused working _1744.JPG

3 8 Electric Black and Decker jig saw. Used working _1740.JPG 9 Electric Craftsman portable air compressor with spraying attachment. Used working _1738.JPG 22 Electric Craftsman 1-1/2 HP router. Used working _1748.JPG 32 Electric Powermatic 10" Artisans Saw. Used working _1765.JPG _1766.JPG 33 Electric Sanborn Black Max 5 HP air compressor. Used working _1768.JPG _1770.JPG 34 Electric Powermatic Model " bandsaw. Unused in box. _1771.JPG _1772.JPG 114 Electric Craftsman 1 HP router with biscuit jointer attachment. Used working Condition. _1746.JPG _1747.JPG

4 58 Gift Card Lee Valley $250 gift card. Donated by Lee Valley. org/auction/donations/sca n0098.jpg 27 Miscellaneous Titebond III wood glue. 2-1/2 gallon jug. _1762.JPG 44 Miscellaneous Anti-Fatigue floor mat. New #3 of 3 Donated by _1839.JPG 45 Miscellaneous Anti-Fatigue floor mat. New #2 of 3 Donated by _1839.JPG 46 Miscellaneous Anti-Fatigue floor mat. New #1 of 3 Donated by _1839.JPG 63 Miscellaneous New Book. Essential Guide to the Speed Square. How to figure everything out with one simple tool, no batteries required. Donated by Fox Chapel Publishing. org/auction/donations/sca n0102.jpg 142 Miscellaneous 10 pound box of assorted sandpaper. Donated by Klingspor. G_1933.JPG

5 145 Miscellaneous Four light-duty face shields. New. G_1940.JPG 10 Non-Electric Clamp-on table vise. Unused _1739.JPG 11 Non-Electric Workforce tool belt with suspenders. Unused _1723.JPG 24 Non-Electric Porter Cable Model 250 Cordless (Gas-Powered) 2-1/2" 16 Gauge Finish Nailer in carrying case. Includes 1", 1-1/2", 2" and 2-1/2" galvanized brads and two gas cartridges. Used working _1753.JPG _1754.JPG 43 Non-Electric Kreg Deck Kit. New Donated by _1854.JPG 66 Non-Electric Wood River 24" center fnding rler. Stainless steel. New #1 of 2 donated by _1780.JPG _1782.JPG 67 Non-Electric Wood River 24" center fnding rler. Stainless steel. New #2 of 2 donated by _1780.JPG _1781.JPG

6 68 Non-Electric The Moby Stick table saw push stick. New #1 of 2 donated by _1783.JPG _1786.JPG 69 Non-Electric The Moby Stick table saw push stick. New #2 of 2 donated by _1783.JPG _1786.JPG 70 Non-Electric Veritas flush cutting saw. New Donated by _1788.JPG _1789.JPG 71 Non-Electric Wood River set of 10 silicone chisel edge guards, New Donated by _1790.JPG 72 Non-Electric Broz machinist's scriber. New Donated by Woocraft. _1791.JPG 74 Non-Electric GRIP 3-piece caliper and divider set. New Donated by _1793.JPG 75 Non-Electric FastCap AccuScribe Pro scribing tool. New Donated by _1794.JPG

7 77 Non-Electric Pair of push blocks. New Donated by _1796.JPG 78 Non-Electric Kreg Jig K4. New Donated by _1799.JPG _1800.JPG 79 Non-Electric Kreg Jig K5. New Donated by _1801.JPG _1802.JPG 84 Non-Electric Custom Leathercraft widemouth tool bag. Gently used G_1821.JPG G_1820.JPG 85 Non-Electric Two Jorgenson #2 wooden clamps. Gently used G_1822.JPG 86 Non-Electric Stanley #2244 Miter Box. 22" saw length. Used G_1823.JPG 87 Non-Electric Hand saw tooth set tool. No maker. Good used G_1824.JPG G_1825.JPG

8 88 Non-Electric Wooden hand plane. Bell #76. 15" long x 2-2/3" wide. Used G_1826.JPG G_1827b.JPG 89 Non-Electric Wooden hand plane. No maker. 15" long x 2-3/4" wide. Used G_1828.JPG G_1829b.JPG 90 Non-Electric Old wooden hand plane. No maker. 16" long x 2-7/8" wide. Used G_1831.JPG G_1832.JPG 91 Non-Electric Wooden hand plane. Thistle Brand. 22" long x 3" wide. Used G_1836.JPG G_1837.JPG 92 Non-Electric Wooden hand plane. No maker. 26" long x 3-1/4" wide. Used G_1839.JPG G_1840.JPG 93 Non-Electric Assorted bits for brace drill. No maker. Used G_1844.JPG 94 Non-Electric Five brace drills. Your choice, buy one or all. No maker. Used G_1846.JPG

9 95 Non-Electric Gordell-Pratt sliding tee-bevel. Used G_1847.JPG 96 Non-Electric Three bar clamps. Two 24" long. One 12" long. No maker. Used G_1850.JPG 97 Non-Electric Nordic Forge nail puller. Good used G_1851.JPG 98 Non-Electric 12-piece Cummins #3258 carving chisel boxed set. Old but unused G_1853.JPG G_1852.JPG 99 Non-Electric Four old small oil cans. Used G_1854.JPG G_1855.jpg 100 Non-Electric Mini gease gun. Used G_1856.JPG G_1857.JPG 108 Non-Electric 3/4" wood threading kit. Two 3/4" taps. One 3/4" die. No Maker. Unused G_1874.JPG

10 109 Non-Electric Super Omni metal detector. Works fine. Includes instruction sheet. G_1875.JPG 110 Non-Electric Assorted taps and dies. Some extremely small: IMP Brand Size 0, 1 and 2. Good used G_1877.JPG 111 Non-Electric Four ball bearing wheels. All wheels swivel and lock. New G_1878.JPG G_1879.JPG 112 Non-Electric Sears Roebuck and Co. Clamp- On File-N-Guide Model Chainsaw blade shrpener. G_1884.JPG G_1886.JPG 113 Non-Electric Box of 21 C-clamps. Sizes: (2) 4", (6) 3", (3) 2-3/4", (6) 2-1/2", (4) 2". Used G_1883.JPG 115 Non-Electric Kreg R3 Jig Kit. New Donated by _1857.JPG 118 Non-Electric Rockler 12" dovetail jig with through dovetail template kit. Unused G_1887.JPG G_1888.JPG

11 120 Non-Electric Steel hand plane. No mfr. 22" long x 2-7/8" wide. Used G_1891.JPG G_1892.JPG 121 Non-Electric Steel hand plane. No mfr. 13" long x 2-1/2" wide. Used G_1893.JPG G_1894.JPG 122 Non-Electric Drill powered mini jointer. This has got to be an antique. Used G_1896.JPG G_1895.JPG 123 Non-Electric Stanley steel hand plane. 6" long x 1-7/8" wide. Used G_1897.JPG G_1898.JPG 124 Non-Electric Small bench vise with clamp. 5" wide. Used G_1900.JPG G_1899.JPG 125 Non-Electric Small bench vise with clamp. 3" wide. Used G_1901.JPG G_1902.JPG 139 Non-Electric Craftsman 2-drawer tool box. 18" wide x 8" deep. Used G_1925.JPG G_1926.JPG

12 141 Non-Electric Box of assorted shop vac nozzles and adapters. G_1880.JPG 143 Non-Electric Delta 36" flexible shaft with 3/16" capacity keyless chuck. G_1934.JPG Woodturning and Accessories Lot No. Category Description Photo1 Click Link for Large Photo 1 17 Gift Card Woodturningz $20 gift card. Note: only one gift card per person is allowed to be redeemed on club donated gift cards. #1 of 4 donated by Woodturningz. _1711.JPG Photo2 Click Link for Large Photo 2 18 Gift Card Woodturningz $20 gift card. Note: only one gift card per person is allowed to be redeemed on club donated gift cards. #2 of 4 donated by Woodturningz.com 19 Gift Card Woodturningz $20 gift card. Note: only one gift card per person is allowed to be redeemed on club donated gift cards. #3 of 4 donated by Woodturningz.com 20 Gift Card Woodturningz $20 gift card. Note: only one gift card per person is allowed to be redeemed on club donated gift cards. #4 of 4 donated by Woodturningz.com 25 Gift Card BellForest $100 gift certificate. Donated by BellForest Figured and Exotic Woods. _1712.JPG _1713.JPG _1714.JPG _1757.JPG

13 26 Gift Card Robust up to $100 in merchandise gift certificate. Donated by Robust, LLC. _1758.JPG 28 Gift Card Packard Woodworks $20 gift Card. #4 of 4 donated by Packard Woodworks. _1764.JPG 29 Gift Card Packard Woodworks $20 gift Card. #1 of 4 donated by Packard Woodworks. _1764.JPG 30 Gift Card Packard Woodworks $20 gift Card. #2 of 4 donated by Packard Woodworks. _1764.JPG 31 Gift Card Packard Woodworks $20 gift Card. #3 of 4 donated by Packard Woodworks. _1764.JPG 37 Gift Card Highland Hardware approx $20 gift certificate for one Woodturner's bandsaw blade, stock length. org/auction/donations/hig hland.jpg 59 Gift Card Metro Lumber $25 gift certificate. #1 of 2 donated by Metro Lumber. org/auction/donations/sca n0099.jpg 60 Gift Card Metro Lumber $25 gift certificate. #2 of 2 donated by Metro Lumber. org/auction/donations/sca n0099.jpg 12 Miscellaneous Gordon clamp-on batterypowered lathe light. Unused working _1732.JPG

14 23 Miscellaneous Rockler stainless steel travel mug kit. You turn the wooden cup and insert the stainless steel liner. New in box. _1750.JPG 35 Miscellaneous Segmented Bowl Kit. The Pinstripe. Donated by Bud Latven's BowlKit Co. _1776.JPG 36 Miscellaneous Segmented Bowl Kit. The Anasazi. Donated by Bud Latven's BowlKit Co. _1777.JPG 52 Miscellaneous Woodcraft 21-pocket tool bag. New Donated by _1853.JPG 61 Miscellaneous New Book. Learn to Turn with Barry Gross. A beginners guide to woodturning start to finish. Donated by Fox Chapel Publishing. org/auction/donations/sca n0101.jpg 62 Miscellaneous New Book. Pen Turner's Workbook by with Barry Gross. Making pens from simple to stunning. Donated by Fox Chapel Publishing. org/auction/donations/sca n0103.jpg 73 Miscellaneous Anchorseal 2 green wood sealer. 1 quart can. New Donated by _1792.JPG 76 Miscellaneous 1" double-faced turners tape. New condiion. Donated by _1795.JPG 80 Miscellaneous Woodcraft 30-pocket tool roll. New Donated by _1803.JPG _1805.JPG

15 81 Miscellaneous Oneway chuck 1"x 8 thread adaptor. Used _1807.JPG 82 Miscellaneous Delta lathe bed extension. For Delta Midi Lathe. Used _1808.JPG 126 Miscellaneous Oneway live center thread adaper. 3/4"-10thd to 1"-8thd. Part Used G_1904.JPG G_1905.JPG 127 Miscellaneous Oneway taper lock adapter for Stronghold chuck. Used G_1907.JPG G_1908.JPG 128 Miscellaneous HTC Brand mobile machine base. 21-1/2" x 21-1/2". Used G_1909.JPG G_1910.JPG 134 Miscellaneous Woodcraft laser key ring kit. Includes bushings. Unused G_1918.JPG 135 Miscellaneous 6" peppermill kit. Unused G_1919.JPG 13 Pen Supplies Set of 5 pen blanks. #1 of 4. Donated by Woodturningz _1707.JPG 14 Pen Supplies Set of 5 pen blanks. #2 of 4. Donated by Woodturningz _1708.JPG

16 15 Pen Supplies Set of 5 pen blanks. #3 of 4. Donated by Woodturningz _1709.JPG 16 Pen Supplies Set of 5 pen blanks. #4 of 4. Donated by Woodturningz _1710.JPG 47 Wood Marblewood turning block. 6" x 6" x 2". Donated by _1840.JPG 48 Wood African rosewood turning block. 6" x 6" x 2". Donated by _1844.JPG 49 Wood Bloodwood turning block. 6" x 6" x 3". Donated by _1862.JPG 50 Wood Canarywood turning block. 6" x 6" x 3". Donated by _1848.JPG 51 Wood Spectraply confetti. 6" x 2" x 2". Donated by _1850.JPG 65 Wood Bocote turnng block. 6" x 6" x 3". Donated by _1778.JPG 38 Woodtuning Aurora Woodturners Lamp. 2 of 2. Model F5-1M75B. Donated by Woodturners Wonders. _1821.JPG _1821.JPG 39 Woodturning Aurora Woodturners Lamp. 1 of 2. Model F5-1M75B. Donated by Woodturners Wonders. _1820.JPG _1821.JPG

17 40 Woodturning Rude Osolnic Signature 1/2" roughing gouge manufactured by Henry Taylor. Very sharp edge. Used working _1828.JPG _1829.JPG 41 Woodturning Rude Osolnic Signature 5/8" roughing gouge manufactured by Henry Taylor. Very sharp edge. Used working _1823.JPG _1824.JPG 42 Woodturning Handmade beading tool. Round cross-section with walnut handle. Used working condion. _1830.JPG _1831.JPG 53 Woodturning Groz outside caliper. New Donated by _1859.JPG 54 Woodturning 2" sanding disk kit. New Donated by _1860.JPG 55 Woodturning 24-piece detail sanding kit. New Donated by _1861.JPG 101 Woodturning Jansjo gooseneck clip-on LED work light. New in box. G_1958.JPG 102 Woodturning Wagner MMC220 wood moisture meter. With carrying case and manual. New in box. G_1960.jpg 103 Woodturning Set of 4 Robert Sorby beading tools. Sizes: 3/8", 1/4", 3/16", 1/8". Good used G_1961.JPG G_1962.JPG 104 Woodturning Easy Wood - Easy Finisher Ci0. Good used G_1963.JPG G_1964.JPG

18 105 Woodturning Easy Wood - Mini Easy Detailer Ci4. Good used G_1968.JPG G_1969.JPG 106 Woodturning Easy Wood - Mini Easy Rougher Ci2m. Good used G_1970.JPG G_1971.JPG 107 Woodturning Easy Wood - Mini Easy Finisher Ci3. Good used G_1972.JPG G_1973.JPG 116 Woodturning 117 Woodturning Expansion Chucky. This is an expandable collet that ranges from 2" to 2-7/8" for turned bracelets, napkin rings, etc. Donated by Don Doyle at www rubberchucky com Two 1" threaded vacuum chuck faceplates. Diameters 9" and 12". Used org/auction/donations/exp ansionchucky.jpg G_1881.JPG G_1882.JPG 129 Woodturning Set of three Home of Woodturning hollowing tools. 5/16" shaft diameter. Used G_1911.JPG G_1912.JPG 130 Woodturning Oneway #4 Stronghold chuck jaws. Part Used G_1913.JPG 131 Woodturning Oneway #3 Stronghold chuck jaws. Used G_1914.JPG 132 Woodturning Oneway #1 Stronghold chuck jaws. Used G_1915.JPG 133 Woodturning Oneway Stronghold chuck spigot jaws. Used G_1916.JPG G_1917.JPG 136 Woodturning 10" cole jaw set. Fits Talon chuck and other small chucks. No mfr. Used G_1920.JPG

19 137 Woodturning Collet set for 1"-8thd lathe headstock. Collet sizes 1/4", 3/8", 1/2", 3/4", 5/8". Used G_1921.JPG G_1922.JPG 138 Woodturning Gripper expansion chuck for 1" flat-bottomed hole in base. Used G_1923.JPG G_1924.JPG 146 Woodturning Set of Oneway collet jaws. Used with Master collet jaws. Sizes: 1-1/2", 1-1/4", 1", 3/4", 1/2". Used. G_1938.JPG 119 Woodworking Oneway Mega Jumbo Cole Jaws. Part Used G_1890.JPG G_1889.JPG

MATERIALS & TOOLS REQUIRED INTRODUCTION. Before you start turning, read and understand this entire procedure.

MATERIALS & TOOLS REQUIRED INTRODUCTION. Before you start turning, read and understand this entire procedure. INTRODUCTION This set of instructions shows one method to turn mills.there are many other possible variations and techniques. NOTE: These instructions are specific to 'Chef Specialties' mechanism. For

More information

National Certificate in Woodturning

National Certificate in Woodturning National Certificate in Woodturning The National Association of Woodworkers offers the Certificate in Woodturning as a high quality, nation-wide, woodturner training programme. This programme was developed

More information

DIY. Inertia Sanders. John Halstad

DIY. Inertia Sanders. John Halstad Inertia Sanders DIY John Halstad Introduction Inertia sanders can help you prepare your turnings for ne nishes, are great for removing tool marks, leveling the nished surface, erasing left over sanding

More information

Artistic Woodturners Meeting of 12 August 2017

Artistic Woodturners Meeting of 12 August 2017 Artistic Woodturners Meeting of 12 August 2017 Meeting was called to order by Norm Freeman. One visitor, Mike Francis, president of Azalea Woodturners, was recognized. 25 members attended. Business portion

More information

Learning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of t

Learning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of t Learning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of the different parts of the lathe. To be able to identify

More information

Wooden Plane. Hardware Kit. 05P Blade packaged separately.

Wooden Plane. Hardware Kit. 05P Blade packaged separately. Wooden Plane Hardware Kit Veritas Tools Inc. Ottawa ON K2H 1C2 Canada Ogdensburg NY 13669-2205 United States www.veritastools.com 05P40.45 W22356p@AEBHe Blade packaged separately. Introduction The following

More information

CATALOGUE WOOD WORKING JET HAS 50 YEARS EXPERIENCE IN WOOD WORKING MACHINES SOLID CONSTRUCTION FOR ACCURACY AND LONG LIFE

CATALOGUE WOOD WORKING JET HAS 50 YEARS EXPERIENCE IN WOOD WORKING MACHINES SOLID CONSTRUCTION FOR ACCURACY AND LONG LIFE Jet products are Swiss customised and built to a high standard of accuracy. Cast iron construction ensures a lifetime of reliable performance WOOD WORKING CATALOGUE JET HAS 50 YEARS EXPERIENCE IN WOOD

More information

TURNING BOWLS AND PLATTERS. With Glenn Lucas 2014 ARROWMONT CLASS JIM PERRIELLO

TURNING BOWLS AND PLATTERS. With Glenn Lucas 2014 ARROWMONT CLASS JIM PERRIELLO TURNING BOWLS AND PLATTERS With Glenn Lucas 2014 ARROWMONT CLASS JIM PERRIELLO 1. Glenn Lucas Instructor and Greg Schramek (Asheville, NC), assistant. a. Glenn Lucas is an Irish woodturner who is recognized

More information

First Activity - Getting acquainted with the lathe

First Activity - Getting acquainted with the lathe First Activity - Getting acquainted with the lathe Goals and objectives: Set up for spindle turning Practice basic tool cuts o Roughing out o Smoothing o Beads & Coves o Parting & sizing Process: Mount

More information

A candle stick addresses transferring and reproducing dimensions from a plan and breaking the project into steps.

A candle stick addresses transferring and reproducing dimensions from a plan and breaking the project into steps. Activities Discussion These projects allow more skill development including making items to match a drawing, sizing projects to specific dimensions, and just trying fun stuff for the first time! A candle

More information

Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland Lee s Summit, Missouri

Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland Lee s Summit, Missouri Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland Lee s Summit, Missouri In Remembrance of George Sonnie Sharrar Oct. 2, 1914-Dec. 25,2007 (Patternmaker, Master Bowl

More information

Fig2: The Sliding Glue Block from the back.

Fig2: The Sliding Glue Block from the back. Ornament Stand Introduction It was one of those forehead smacking moments. I was taking the #2 jaws off my Stronghold chuck, to put on my homemade wooden two jaw chuck set-up. For some reason instead of

More information

How to Make a Hat Bending Jig

How to Make a Hat Bending Jig How to Make a Hat Bending Jig MATERIALS One 2" x 8" x 11" long (Base Block) exact measurements are 7 ½" x 1 ½" x 11" (Pine is OK to use, I have used scrap Walnut for my benders) Four pieces of Oak 1" x

More information

Turning a CrushGrind shaft grinder without using glue

Turning a CrushGrind shaft grinder without using glue Turning a CrushGrind shaft grinder without using glue A step-by-step approach to removing the apprehension 1 Chris West Content Introduction 3 Robert Sorby CrushGrind Recess Cutting Tool 4 Required tools

More information

Catagory Item # Item Asking Price. Biscuit Cutter 12 Biscuit cutter - large - Riobi $50.00 Biscuit Cutter 13 Biscuit cutter - small - Riobi $50.

Catagory Item # Item Asking Price. Biscuit Cutter 12 Biscuit cutter - large - Riobi $50.00 Biscuit Cutter 13 Biscuit cutter - small - Riobi $50. PARTIAL TOOL LIST as of 11/22/2016 This is a only a small portion of the tools that will be available. The rest are still being evaluated and gotten ready to be sold. A complete list will be sent out before

More information

M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres $4, $4, Product Brochure For W685. Features.

M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres $4, $4, Product Brochure For W685. Features. M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: W685 MODEL: M910 Swing Over Bed (mm): 520 Between Centres (mm): 975 Spindle Nose Thread:

More information

Image Item Model Price. Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning Kit Chrome Bottle Opener Kit (Woodturning) 07045

Image Item Model Price. Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning Kit Chrome Bottle Opener Kit (Woodturning) 07045 PO Box 531 Merrimack, NH 03054 craig@chefwarekits.com 267 888 6216 http://www.chefwarekits.com/ Category: All Categories Image Item Model Price Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning

More information

Project 17884EZ: Shaker End Table

Project 17884EZ: Shaker End Table Project 17884EZ: Shaker End Table With its clean, simple lines, this piece is unmistakably Shaker style. Ours is made from cherry, a wood commonly used by Shaker craftsman, but we ve also seen this piece

More information

Christmas Bell Ornament

Christmas Bell Ornament Christmas Bell Ornament This is an easy Christmas ornament idea I cabbaged from a friend and skilled turner, Curt Fuller, from Utah. I kind of adapted it to my style but I still got the idea from him.

More information

Agricultural Mechanics and Technology Power Tool Safety Rules

Agricultural Mechanics and Technology Power Tool Safety Rules Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust

More information

Woodchips OCTOBER. November Challenge Anything you ve done using Cole jaws, reverse turning, or vacuum chuck THE CHALLENGE SHOW AND TELL

Woodchips OCTOBER. November Challenge Anything you ve done using Cole jaws, reverse turning, or vacuum chuck THE CHALLENGE SHOW AND TELL Woodchips - 2014 OCTOBER Remember! Get your raffle tickets when you come into the meeting November Challenge Anything you ve done using Cole jaws, reverse turning, or vacuum chuck November Demo Spindle

More information

WOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron

WOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron 01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for

More information

When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM

When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM SAVE INK! PRINT IN BLACK & WHITE Where: Meadowlands Expo Center 355 Plaza Drive Secaucus, NJ 07094 When: Fri. 12 PM - 6 PM Sat. 10 AM - 6 PM Sun.10 AM - 3 PM March 2nd - 4th Admission Discount Bring Your

More information

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid

PRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid 1 1 HITACHI 15" MITER SAW H-440041 2 1 OMGA RN 450 RADIAL ARM SAW "NEW MOTOR" 3 1 POWERMATIC MODEL 68 TABLE SAW SR# 84688183 4 1 RITTER LINE BORING MACHINE MODEL R-123 SR#269 3/3/94 5 1 BLUM MINI PRESS

More information

BUILDING A SELMER MACCAFERRI GUITAR

BUILDING A SELMER MACCAFERRI GUITAR BUILDING A SELMER MACCAFERRI GUITAR A step-by-step guide to building a laminated body Selmer-Maccaferri guitar Michael Collins The Heel The heel should now be prepared to be glued to the neck shaft. Using

More information

Pen Turning 101 Turning a beautiful writing implement is as easy as

Pen Turning 101 Turning a beautiful writing implement is as easy as Pen Turning 101 Turning a beautiful writing implement is as easy as 1-2-3. By Joe Hurst-Wajszczuk Getting started As the igure at right illustrates, pen turning boils down to turning a cylinder. The body,

More information

Clay Foster Demonstration topics

Clay Foster Demonstration topics Clay Foster Demonstration topics Rotation #1: Low-tech surface enhancement An array of surface enhancement techniques that don t require a large investment in tools, materials, or skills will be presented.

More information

Chili Pepper Routed Bowl

Chili Pepper Routed Bowl Chili Pepper Routed Bowl MLCS Items Needed: Chili Pepper Bowl and Tray Template #9189 Top Mounted Bearing Dish Cutter Router Bit #7817 1/2 Router Collet Extension and Wrenches #9465 3/16 Radius Round Over

More information

INDEX. 110 powermatic.com. Accu-Fence Assembly for PM Accu-Fence Rear-Lock Assembly 12. Accu-Fence Side Panel Replacement Kit 12

INDEX. 110 powermatic.com. Accu-Fence Assembly for PM Accu-Fence Rear-Lock Assembly 12. Accu-Fence Side Panel Replacement Kit 12 INDEX A Accu-Fence Assembly for PM2000 10 11 Accu-Fence Rear-Lock Assembly 12 Accu-Fence Side Panel Replacement Kit 12 Accu-Fence System 30" 10 15 Accu-Fence System 50" 10 15 B Bandsaw, 14" PWBS-14 26

More information

Chief s Shop: Simple Woodworking Bench

Chief s Shop: Simple Woodworking Bench Chief s Shop: Simple Woodworking Bench Be sure to read the instructions and review the illustrations and accompanying video for this project BEFORE you start. Follow ALL SAFETY GUIDELINES AND RECOMMENDATIONS

More information

TURNING A PEN ORIGINAL BY MIKE RUDE REVISED BY GORDON PATNUDE - AUGUST 2015, OCTOBER 2016 EQUIPMENT AND SUPPLIES NEEDED

TURNING A PEN ORIGINAL BY MIKE RUDE REVISED BY GORDON PATNUDE - AUGUST 2015, OCTOBER 2016 EQUIPMENT AND SUPPLIES NEEDED TURNING A PEN ORIGINAL BY MIKE RUDE SEPT 2006 REVISED BY GORDON PATNUDE - AUGUST 2015, OCTOBER 2016 PHOTOGRAPHY BY JIM GOTT AUGUST 2015 EQUIPMENT AND SUPPLIES NEEDED A PEN TURNING TUTORIAL [this document]

More information

Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland

Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland Segmented Bowl Making Presentation (Polychromatic Stave-Type Bowl Making) by Jay Helland More Woodworker than Wood Turner George Sonnie Sharrar About Your Safety Working with wood is inherently dangerous!

More information

Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver.

Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver. Jimmy s 2 nd demonstration was what he called an African Drum style box made from Iroko with a cocobolo insert in the lid with inlaid sterling silver. He started by roughing out the block with a roughing

More information

Demonstration Bob Rosand October 20, 2007 by Bob Gunther

Demonstration Bob Rosand October 20, 2007 by Bob Gunther Demonstration Bob Rosand October 20, 2007 by Bob Gunther Overview: Bob Rosand has been a woodturner for more than 25 years. He teaches, demonstrates and writes articles on many topics pertaining to woodturning.

More information

Goals and objectives: Process: Set up for spindle turning Practice basic tool cuts o Roughing out o Smoothing o Beads & Coves o Parting & sizing

Goals and objectives: Process: Set up for spindle turning Practice basic tool cuts o Roughing out o Smoothing o Beads & Coves o Parting & sizing First Activities Getting acquainted with the lathe Goals and objectives: Set up for spindle turning Practice basic tool cuts o Roughing out o Smoothing o Beads & Coves o Parting & sizing Process: Mount

More information

FLAT TO FABULOUS Make a Bowl from a Single Flat Board - Or How to Eat Salad off of Scrap Wood

FLAT TO FABULOUS Make a Bowl from a Single Flat Board - Or How to Eat Salad off of Scrap Wood FLAT TO FABULOUS Make a Bowl from a Single Flat Board - Or How to Eat Salad off of Scrap Wood Let s face it: Woodworkers are frugal people. In fact, if you are anything like me, you have a hard time throwing

More information

To Improve Your Woodturning

To Improve Your Woodturning To Improve Your Woodturning Things to make / buy / do before turning 1 Use measuring masking tape on tool rest 2 Outlet strip on lathe 3 Lighting - So many LED solutions! 4 Get taps to make lots of our

More information

Cabinetmaking & Millwork CIP Task Grid

Cabinetmaking & Millwork CIP Task Grid 1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory

More information

hanging mirror Two-piece desk set Handmade Gifts Photo: John Tetreault

hanging mirror Two-piece desk set Handmade Gifts Photo: John Tetreault hanging mirror Two-piece desk set Handmade Gifts 44 FINE woodworking Photo: John Tetreault Flatware carrier Tea light candle holder 4 Tasteful projects made quickly from scraps BY CHRISTIAN BECKSVOORT

More information

Handle Hardware Kit for Router Plane 05P38.10

Handle Hardware Kit for Router Plane 05P38.10 Handle Hardware Kit for Router Plane 05P38.10 Introduction With this kit, you can make a set of replacement handles for the Veritas Router Plane. The following instructions describe how to make one handle

More information

Guild of Oregon Woodworkers Shop Safety Test

Guild of Oregon Woodworkers Shop Safety Test Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the

More information

Introduction. Recess. Making the Recess

Introduction. Recess. Making the Recess Introduction A few weeks after last Christmas I got an idea for an ornament. That may seem to be backwards timing as before Christmas would have advantages. But Christmas is when I think about ornaments

More information

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM SHOW COUPONS Cuttin Prices ALL WEEKEND LONG! ON THE BRAND NAMES KNOW AND TRUST! Where: Gateway Center, Ballroom ABCD One Gateway Drive Collinsville, IL 62234 When: Fri. 12pm to 6pm Sat. 10am to 6pm Sun.

More information

Vacuum System for Woodturnes by Robin Costelle graphics by Caleb Costelle

Vacuum System for Woodturnes by Robin Costelle graphics by Caleb Costelle Vacuum System for Woodturnes by Robin Costelle graphics by Caleb Costelle Have you ever wondered if you need a vacuum system for your woodturning needs? I would answer Yes. A vacuum system is, to me, an

More information

WOODWORDS ON THE BRANDYWINE

WOODWORDS ON THE BRANDYWINE ROHM A ND H AAS C OMPANY WOODWORDS ON THE BRANDYWINE Volume 24 Issue 12 December 2011 WOODWORKERS GUILD OFFICERS FOR 2010-11 President: Peter Leavens VP: George Hoffman Treasurer: Jeremy Noblitt Newsletter

More information

Turn to the News. Inside this issue: Highlights

Turn to the News. Inside this issue: Highlights A monthly publication of the Pre sque Isle Wo odturners Turn to the News Volume 1 Issue 11 November 2016 Highlights Elections Inside this issue: Presidents Message 1 FIY 2 Library News 3 Activity Calendar

More information

Get a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way

Get a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way Get a Smart Start in Woodturning For about $800, you ll have everything you need to work wood in a revolutionary way By David Heim Safety gear. Instead of relying on safety glasses alone, many turners

More information

WoodCentral's Tool Grinds Page

WoodCentral's Tool Grinds Page WoodCentral's Tool Grinds Page Here are some photos of lathe tool grinds submitted by our Turning forum visitors. It is our suspicion that there are as many grinds as there are turners, and that a skilled

More information

PROJECT PLANS EXPANDABLE CRAFT CENTER

PROJECT PLANS EXPANDABLE CRAFT CENTER R PROJECT PLANS EXPANDABLE CRAFT CENTER Whether you re working on craft projects, sewing, or pursuing another hobby, this craft center offers a great place to work. It features a large work surface that

More information

Denise M. DeRose Handled Clamshell Handbag

Denise M. DeRose Handled Clamshell Handbag Denise M. DeRose Handled Clamshell Handbag Materials: Wood 2 discs between 6 and 9 in diameter -- 4/4, 6/4 or 8/4 1 piece of thin hardwood ¼ inch thick and 4 x 10 Wood for waste blocks Supplies Small piece

More information

Presentation by Bill Haskell (September 9, 2001)

Presentation by Bill Haskell (September 9, 2001) P o w e r C a r v i n g Presentation by Bill Haskell (September 9, 2001) Power carving, as I define it, is the use of electric power tools in the process of removing material (usually wood) to create a

More information

Face Once you've tapped the hole, cut the circles out on your band saw.

Face Once you've tapped the hole, cut the circles out on your band saw. Introduction An earlier article in More Woodturning on turning wine stoppers got me thinking about collet chucks. I wondered if I could make one entirely out of wood. I thought this would be just an exercise

More information

About.com :

About.com : http://woodworking.about.com/gi/dynamic/offsite.htm?sit...//www.popularwoodworking.com/features/fea.asp%3fid=1088 (1 of 8)1/28/2004 12:05:01 AM Modern Storage Tower The last thing I want to do when starting

More information

Bowl Turning by Eugen Schlaak, Niagara Falls, Ontario Canada

Bowl Turning by Eugen Schlaak, Niagara Falls, Ontario Canada Bowl Turning by Eugen Schlaak, Niagara Falls, Ontario Canada The following article describes the production of simple open type bowls, which are easy to produce. Not much thinking, as far as design and

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

Sheet Metal Tools. by:prem Mahendranathan

Sheet Metal Tools. by:prem Mahendranathan Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill

More information

EASY BREAD/ CUTTING BOARDS

EASY BREAD/ CUTTING BOARDS PLANS BY DEEPLY SOUTHERN HOME EASY BREAD/ CUTTING BOARDS DIFFICULTY LEVEL: EASY TOOLS REQUIRED 18V ONE+ RANDOM ORBIT SANDER 18V ONE+ CORNER CAT FINISH SANDER 18V ONE+ LITHIUM-ION DRILL KIT 18V ONE+ ORBITAL

More information

SOUTHERN COLUMBIA AREA SCHOOL DISTRICT TECHNOLOGY EDUCATION BID WOOD SHOP UNIT TOTAL QUAN UNIT DESCRIPTION CO MFG# CAT # COST COST COMMENTS

SOUTHERN COLUMBIA AREA SCHOOL DISTRICT TECHNOLOGY EDUCATION BID WOOD SHOP UNIT TOTAL QUAN UNIT DESCRIPTION CO MFG# CAT # COST COST COMMENTS 2 BOX GERSON DISPOSABLE RESPIRATOR MASK-50/BX PAXTON 1501 340094 $ - $ - 4 ROLL ABRASIVE DISCS 5" STIKIT, 220 GRIT, ROLL/100 PAXTON 524306 $ - $ - 6 ROLL ABRASIVE DISCS 5" STIKIT, 80 GRIT, ROLL/100 PAXTON

More information

North Texas Woodworkers Association

North Texas Woodworkers Association Welcome President John Loftis welcomed a large group to the May meeting. Steve Yauch said he will be sending out information on the annual tool sale in Garland. John Loftis says he has a 37 Performex drum

More information

Kansas City Woodturners. May 1996 Newsletter No. 23 Local Chapter of The American Association of Woodturners

Kansas City Woodturners. May 1996 Newsletter No. 23 Local Chapter of The American Association of Woodturners Kansas City Woodturners May 1996 Newsletter No. 23 Local Chapter of The American Association of Woodturners The May Meeting The next meeting will be held at 7:00 PM May 13th at the Woodcraft Supply Store

More information

DIY Wine Storage Cabinet

DIY Wine Storage Cabinet DIY Wine Storage Cabinet ADDICTED2DIY.COM *Before beginning this project, please read through all of the plans and the blog post. When building this project, be sure to measure your wood and cut to fit.

More information

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM

MUST BRING PRINTED COUPON TO THE SHOW TO REDEEM SHOW COUPONS Cuttin Prices ALL WEEKEND LONG! ON THE BRAND NAMES KNOW AND TRUST! Where: Florida State Fair Entertainment Hall 4800 US Hwy 301 North Tampa, FL 33610 When: Fri. 12pm to 6pm Sat. 10am to 6pm

More information

INSTALLATION INSTRUCTIONS REPLACING EXISTING DEADBOLT ASSEMBLY

INSTALLATION INSTRUCTIONS REPLACING EXISTING DEADBOLT ASSEMBLY INSTALLATION INSTRUCTIONS REPLACING EXISTING DEADBOLT ASSEMBLY A B C L M N D E F G O P Q H I J Tools provided in Amesbury installation kit: (A) door router fixture, (B) doorframe router fixture, (C) ½

More information

Herringbone Serving Tray

Herringbone Serving Tray Overall dimensions 3"h 11"w 171/2"l Fun-and-Fanciful Herringbone Serving Tray Designer/Builder: Craig Godsey Writer: Jim Harrold Note: Before beginning this project, take a few minutes to install your

More information

Cabinetmaking & Millwork CIP Task Grid

Cabinetmaking & Millwork CIP Task Grid 1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State

More information

SSB-18WS - Stainless Steel Work Bench

SSB-18WS - Stainless Steel Work Bench SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):

More information

PEPPERMILL CONSTRUCTION

PEPPERMILL CONSTRUCTION PEPPERMILL CONSTRUCTION I ve been asked a several times to put together a review of how I turn peppermills. They are a great project, perfect for gifts and a lot of fun to make. They don't require especially

More information

Contents. Introduction. List of Materials. Glue, Resin and Fixings. Tools. Construction Sequence. Study Plans Sheet 3. Andrew Walters April 2012

Contents. Introduction. List of Materials. Glue, Resin and Fixings. Tools. Construction Sequence. Study Plans Sheet 3. Andrew Walters April 2012 Mia Study Plans Contents C Andrew Walters April 2012 2 Introduction. 4 List of Materials. 5 Glue, Resin and Fixings. 6 Tools. 7 Construction Sequence. 10 Study Plans Sheet 1. 11 Study Plans Sheet 2. 12

More information

Cape Cod Woodturners Minutes and News May 6, 2015

Cape Cod Woodturners Minutes and News May 6, 2015 Cape Cod Woodturners Minutes and News May 6, 2015 The May meeting started at 6:40 following a pre-meeting hands-on demo by Jim Silva and tool sharpening tutoring by Mike Grady. President Clarke Buchanan

More information

THE SAWDUST. Meeting Time. Volume 14, Issue 6 June 2007

THE SAWDUST. Meeting Time. Volume 14, Issue 6 June 2007 THE SAWDUST Volume 14, Issue 6 June 2007 Small Talk Welcome to the latest edition of The Sawdust! This month s issue has a number of photographs from Fred Miller and John Goodson s presentation at the

More information

Making Beads of Courage boxes (using flat wood stock and thin-walled 6 inch white PVC sewer pipe.)

Making Beads of Courage boxes (using flat wood stock and thin-walled 6 inch white PVC sewer pipe.) Making Beads of Courage boxes (using flat wood stock and thin-walled 6 inch white PVC sewer pipe.) Johnny W. Tolly 16212 Crystal Hills Dr. Austin TX 78737 512-922-1242 Acknowledgments: Please note that

More information

Turning a Christmas Angel

Turning a Christmas Angel Turning a Christmas Angel Introduction I was at work one day and a co-worker asked if I had ever turned an angel. I said no. She said I picked one up at craft fair while on vacation. Would you like to

More information

Legacy Bullet Click Pen Kit

Legacy Bullet Click Pen Kit Description: The Bullet Click pen is a step-up kit, with similar features to a Power Click Pen. It has a click mechanism instead of a twist. It uses an 8mm tube and a Parker style gel refill. It is popular

More information

A Publication of the Mid Minnesota Association of Woodturners

A Publication of the Mid Minnesota Association of Woodturners A Publication of the Mid Minnesota Association of Woodturners Volume 8, Issue 8 August 1, 2018 The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization, providing

More information

Shaker Classic Change the legs to change the look

Shaker Classic Change the legs to change the look Shaker Classic Change the legs to change the look 2 Ways B Y C H R I S T I A N BECKSVOORT not long ago, a couple ordered a set of cherry side tables from me, one for each side of their pencil-post bed.

More information

Make a cupboard as a BCATS

Make a cupboard as a BCATS National Certificate in Building, Construction, and Allied Trades Skills (BCATS) Make a cupboard as a BCATS project Unit Standard 25921 Level 2, Credit 6 Name: Contents Reference Page What you need to

More information

BUILDING A STORM DOOR

BUILDING A STORM DOOR BUILDING A STORM DOOR BY NEAL BARRETT Illustrations by George Retseck If you're in the market for a storm door, you probably know that there are many styles and models available. However, most of them

More information

The following is the process of preparing the making the wedge ornament

The following is the process of preparing the making the wedge ornament Wedge Christmas Ornament The following is the process of preparing the making the wedge ornament Setting up your saw to cut true 11.25 degree angles for a 16 piece to make a circle that will form the globe

More information

Reverse Chucking of Bowls A Catalog of Options By Bill Juhl

Reverse Chucking of Bowls A Catalog of Options By Bill Juhl Reverse Chucking of Bowls A Catalog of Options By Bill Juhl Presumption: Reverse chucking comes into play as close to the last stage of work on the lathe. It assumes the interior of the bowl is entirely

More information

Contents. Study Plans. 2 Introduction. 4 List of Materials. 5 Glue, Resin and Fixings. 6 Tools. 7 Construction Sequence

Contents. Study Plans. 2 Introduction. 4 List of Materials. 5 Glue, Resin and Fixings. 6 Tools. 7 Construction Sequence Volare Study Plans Contents 2 Introduction 4 List of Materials 5 Glue, Resin and Fixings 6 Tools 7 Construction Sequence Study Plans The study plans consist of an abridged version of the first 7 pages

More information

Legacy Slimline Touch Pen Kit

Legacy Slimline Touch Pen Kit Description: The model is considered one of the most basic pen kits and is a great starter kit for those new to pen turning. Many experienced pen turners use the kit to make elaborate and unusual pens

More information

Media Center Woodworking Plans Our Home from Scratch

Media Center Woodworking Plans Our Home from Scratch Media Center Woodworking Plans by Our Home from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, injury

More information

Making a Peppermill ( a boring activity) By Mike Lanahan

Making a Peppermill ( a boring activity) By Mike Lanahan Making a Peppermill ( a boring activity) By Mike Lanahan Ground Rules No need for note taking A Portable Document Format (pdf) copy of this presentation is available. Ask questions. It s your time. There

More information

POWER CARVERS/ACCESSORIES

POWER CARVERS/ACCESSORIES 16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes

More information

CHIP AND DUST EXTRACTION SYSTEMS

CHIP AND DUST EXTRACTION SYSTEMS CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories

More information

Copyright 2014 Curtis B. Vevang Page Number 1

Copyright 2014 Curtis B. Vevang Page Number 1 As described on the Woodcraft Website: This is a 9 hour class consisting of 3, 3 hour sessions. The purpose of this class is to introduce woodworking from the ground up. The student will build a tool/garden

More information

Performance Rating Scale: Limited Skills... Moderate Skills..High Skills

Performance Rating Scale: Limited Skills... Moderate Skills..High Skills PERFORMANCE STANDARD EVALUATION CHECKLIST Student Name Instructor s Name School District Performance Rating Scale: 1 2 3 4 5 6 7 8 9 10 Limited Skills..... Moderate Skills..High Skills Performance assessments

More information

Delfini. 19x6 Console Semi Flat Hull. Study Plans

Delfini. 19x6 Console Semi Flat Hull. Study Plans Delfini 19x6 Console Semi Flat Hull Study Plans Contents 3 Introduction 4 Specification 6 List of Materials 7 Glue, Resin and Fixings 8 Tools 9 Construction Sequence 2 Introduction This is the 19' x 6'

More information

Build a Drill Press Vise

Build a Drill Press Vise Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe

More information

Wooden Faceplates. Tapping on the Lathe

Wooden Faceplates. Tapping on the Lathe Wooden Faceplates There are lots of turning jobs where spending some time on set-up makes the turning go quicker and easier. Making Wooden Faceplates is one way to make set-ups and jigs for turning. As

More information

Kris Coyan s Steps to Make a 2-Piece Inside-Out Ornament: 1) Find (2) pieces of wood that have at least two parallel surfaces (such as pen blanks

Kris Coyan s Steps to Make a 2-Piece Inside-Out Ornament: 1) Find (2) pieces of wood that have at least two parallel surfaces (such as pen blanks The October demo was provided by Kris Coyan. Kris showed us how to create very nice but simple tree ornaments using the 2-piece inside-out method. The photo at left are examples of this type of ornament.

More information

Butterfly Leaf Dining Table Plans

Butterfly Leaf Dining Table Plans Butterfly Leaf Dining Table Plans Part 1 An attractive dining table with a secret: the leaf folds and stores inside the table. Season 1, Episode 7 P a g e 2 I first saw a butterfly leaf table in a back

More information

Plans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com

Plans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com

More information

PATINA Auction Lot List

PATINA Auction Lot List PATINA Auction Lot List - 2018 LOT # 1 SAHRPENING STONES 2 DREMEL AND PRESS 3 ROTARY TOOL AND ACCESSORIES 4 DRILLING AND BORING TOOLS 5 ANVIL 6 MEASURING TOOLS 7 MISC HAND TOOLS 8 MISC MINI PWR TOOLS (4)

More information

Jimmy Clewes Masterclass - Cheam Woodturners 10th November 2013

Jimmy Clewes Masterclass - Cheam Woodturners 10th November 2013 This demonstration was the first time in 6 years that Jimmy has demonstrated in the UK. He pointed out that the techniques he uses are his alone, that it is important to enjoy woodturning and do whatever

More information

ENJOY THIS SELECTION FROM. Woodworking 101. Includes Step-by-Step Instructions for 8 Projects. Woodworking

ENJOY THIS SELECTION FROM. Woodworking 101. Includes Step-by-Step Instructions for 8 Projects. Woodworking W ENJOY THIS SELECTION FROM Woodworking 101 Includes Step-by-Step Instructions for 8 Projects Woodworking 101 Aimé Fraser, Matthew Teague, and Joe Hurst-Wajszczuk To purchase your copy of Woodworking 101,

More information

O nament. Birdhouse. Birdhouse Christmas ornaments have become very

O nament. Birdhouse. Birdhouse Christmas ornaments have become very Birdhouse O nament Photo by Al Parrish Dale Nish, one of the principal architects of the turning revival, shares some turning techniques. Birdhouse Christmas ornaments have become very popular the last

More information

Notes for Making Wood Rings With Stainless Steel Insert Centers

Notes for Making Wood Rings With Stainless Steel Insert Centers Notes for Making Wood Rings With Stainless Steel Insert Centers Background These notes describe how to make a ring with a stainless steel (SS) insert and a wood exterior band. They also include information

More information

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity

More information

Alligator Jaw Bone Pens

Alligator Jaw Bone Pens Woodturning Design Project Alligator Jaw Bone Pens by Barry Gross of Arizona Silhouette While demonstrating at the Dallas-Fort Worth woodworking show this past March (2013), Don Ward introduced me to a

More information